13 best rc rock crawler motors

RC rock crawler motors are specialized electric motors designed for remote-controlled (RC) rock crawling vehicles. These vehicles are built for off-road and challenging terrain, such as rocks, gravel, and steep inclines. RC rock crawlers require motors that offer precise control, torque, and low-speed capabilities. Here's what you should know about RC rock crawler motors:

  1. High Torque: RC rock crawlers require high torque motors to navigate over obstacles effectively. High torque provides the necessary power to climb rocks and steep inclines slowly and steadily.

  2. Low Speed: Unlike RC vehicles designed for speed, rock crawlers need motors that can operate at very low speeds. This allows for precise control when maneuvering over rugged terrain.

  3. Brushed vs. Brushless Motors: RC rock crawler motors come in two main types: brushed and brushless. Brushed motors are generally more affordable but may require more maintenance over time due to the brushes wearing down.Brushless motors are more efficient and require less maintenance, but they tend to be more expensive.

  4. KV Rating: The KV rating of an RC motor indicates its rotational speed. For rock crawlers, you typically want a lower KV rating because it signifies a motor designed for low-speed operation. Motors with KV ratings in the range of 10-30 are common for rock crawlers.

  5. Size: The size of the motor should match the size and weight of the RC rock crawler. Larger, heavier crawlers may require more powerful motors to handle the load and terrain.

  6. Compatibility: It's important to choose a motor that is compatible with the specific RC vehicle and its electronic components, such as the ESC (Electronic Speed Controller) and battery.

  7. Water Resistance: Some RC rock crawler motors are designed to be water-resistant or waterproof to allow the vehicle to navigate through wet or muddy terrain without damage.

  8. Cooling: Efficient cooling mechanisms, such as cooling fans or heatsinks, are sometimes included with high-performance rock crawler motors to prevent overheating during extended use.

  9. Gear Ratio: The gear ratio between the motor and the wheels can be adjusted to fine-tune the vehicle's performance. Lower gear ratios provide more torque, while higher ratios offer higher speed.

  10. Upgrade Options: Many RC enthusiasts choose to upgrade their motors to improve performance. Aftermarket motors with different specifications are available to suit various preferences and needs.

In summary, RC rock crawler motors are specialized components designed to provide high torque and precise low-speed control for off-road crawling vehicles. Choosing the right motor involves considering factors such as torque, speed, size, compatibility, and any desired upgrades for your specific RC rock crawler.

Below you can find our editor's choice of the best rc rock crawler motors on the market
  

Globact 550 35T Brushed Motor for 1/10 RC Scale Rock Crawlers and high Torque Rock Racing TRAXXAS TRX4 TRX6 Redcat Axial SCX10 AXI03007 JL 90046 RC4WD D90

Based on 53 reviews Check latest price

Product description

The SURPASS HOBBY 35T 550 modified motor is designed for incredible power output with virtually maintenance-free operation and long-lasting performance. It's 35 turns wire provide big torque and increased power-handling capabilities to give your R/C vehicle the power it craves.

Features:

550 motor size, 3.175mm output shaft.

Virtually maintenance-free operation and long-lasting performance.

Heat-resistance running motors allow faster speeds, longer runtime, and extended motor life.

Precision balanced rotor, smoothness for best reliability and maximum RPM.

Suitable for HSP HPI Wltoys Kyosho TRAXXAS brushed 1/10 RC car.

Specifications:

Brand name: SURPASS HOBBY

Color: Black

Size: 550

Turns: 35T

Watts: 600W

Max voltage: 7.2V

Max Amps: 20A

IO: 1.4A

Resistance: 0.0043

KV(RPM/Volt): 35T

Max RPM: 9500

Diameter: 35.6mm

Length: 57.5mm

Length of extend shaft: 16.5mm

Shaft diameter: 3.175mm

Connector: 3.5mm gold

Weight: About 233g

There may be some deviation due to manual measurement.

Package information:

Package size: 11.2 * 7 * 4.2cm / 4.4 * 2.75 * 1.65in

Package weight: 264g / 9.3oz

Package list:

1 * 550 35T Brushed Motor

  • 550 motor size, 3.175mm output shaft.
  • Virtually maintenance-free operation and long-lasting performance.
  • Heat-resistance running motors allow faster speeds, longer runtime, and extended motor life.
  • Precision balanced rotor, smoothness for best reliability and maximum RPM.
  • Suitable for 1/10 RC rock crawlers and high torque rock racing TRAXXAS TRX4 TRX6 Axial SCX10 AXI03007 JL 90046 RC4WD D90

User questions & answers

Question: Will this fit in a Holyton
Answer: No it doesnt. Anythibg in this price range wont. Redcat gen 8 scout axe has waterproof electronics. 500$
Question: Will this fit the red cat blackout xte
Answer: ALONG TIME!! You will be bored. Before the battery dies it last forever!! Great truck we love it!
Question: Are the specs correct? the rpm and watts dont seem to make sense to me
Answer: You can, you can also switch out bodies and engines, shocks, struts and swing arms
Question: do you have to break it in
Answer: Pretty slow it’s about walking speed or slower

Axial AX24007 55T Rock Crawler Electric Motor, Silver/Orange: AXIC2407

Axial

Based on 336 reviews Check latest price

Product description

This is the Axial 55T Rock Crawler Electric Motor. Designed exclusively for RC Rock Crawlers. Easily equip or upgrade your vehicle for more low-end pull and slower wheel speed while crawling.

Includes preinstalled bullet connectors, no soldering required.

Requires compatible speed control for rock crawler motors

Specifications

  • Shaft Diameter: 3.2mm (0.12")
  • Shaft Length: 12.5mm (0.49")
  • Can Diameter: 36mm (1.4")
  • Can Length: 50.75 (2")
  • Weight: 164g (5.8oz)
  • Mounting Pattern: 25mm (0.98")
  • Wire length: 115mm (4.5")
  • Input Voltage: 4+ cells (12VDC) max

  • Axial 55 Turn Rock Crawler Electric Motor.
  • Designed exclusively for RC Rock Crawlers.
  • Provides more low end pull and slower speed while crawling than stock 27 turn motors
  • Comes with bullet connectors. No soldering required.
  • Requires compatible speed control for rock crawler motors

User questions & answers

Question: Would this work in a carisma sca1e 1/10 crawler
Answer: No but a 20dollar traxxas titan 550 will
Question: will this work for the evader ext
Answer: Dear customer Compatible with Redcat Blackout XTE
Question: Will this work with slash 1/10 scale with xl5 esc
Answer: Dear customer Completely correct
Question: I have the upgraded scx10 gears. Will I have to do any gearing changes on my scx
Answer: You can but for the price I dont even bother with break in. Just lube the bearings after each use and blow the dust out.

Product features

Axial AX24007 55T Rock Crawler Electric Motor

Key Features:

  • Equip or upgrade the Axial AX10 RTR or other rock crawlers for more low end pull and slower speed while crawling
  • Preinstalled bullet connectors, no soldering required

Axial AM27 27T 540 Electric Motor for 1:10 Scale RC Rock Crawlers & Rock Racers: AXIC2400

Axial

Based on 472 reviews Check latest price

Product description

27-turn replacement motor for most Axial 1: 10 scale RC rock crawler and rock racer vehicle. Platform compatibility:scx10 and SCX10 IIsmt10rr10wraith and Wraith spawnax10specifications:shaft diameter: 3mm (0.12 inches)shaft length: 12.45mm (0.49 inches)Can diameter: 36mm (1.42 inches)Can length: 49.7mm (1.96 inches)total length: 72mm (2.83 inches)wire length: 88.9mm (3.5 inches)

From the Manufacturer

Specifications:

  • Shaft Diameter: 3 mm (0.12 in)
  • Shaft Length: 12.45 mm (0.49 in)
  • Can Diameter: 36 mm (1.42 in)
  • Can Length: 49.7 mm (1.96 in)
  • Total Length: 72 mm (2.83 in)
  • Wire length: 88.9 mm (3.5 in)

Requires an ESC.

  • 540 size 27 turn brushed motor
  • Great replacement motor for Axial 1/10 scale rock crawlers and racers
  • Compatible with SCX10, SCX10 II, Smt10, RR10, Wraith, Wraith spawn, and ax10 platforms

User questions & answers

Question: is this the same motor as the stock deadbolt motor
Answer: Yes, is the charisma car is a 1/10 scale and use a 540 or 550 motor fix perfectly in your charisma car.
Question: Whzt motor should i get to mAke my deadbolt faster? And gears
Answer: No it will be too slow. This is a low speed high torque motor
Question: will this fit in my traxxas bandit xl
Answer: No Sir, this one is smaller and slower, you need a brushed 550 motor 12 t or similar
Question: what might the top speed be with stock gearing in a stampede 4x
Answer: no

Apex RC Products 35T Turn 540 Brushed Crawler Electric Motor #9790

Based on 32 reviews Check latest price

Product description

Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.

  • WORKS In Most 1/10 Rock Crawlers
  • REBUILD-ABLE: Replaceable Brushes & Springs
  • DUAL Ball Bearings
  • INCLUDES Motor Connectors
  • LENGTH: 69mm - CAN DIAMETER: 36mm - SCREW HOLES: 26mm SHAFT DIAMETER: 3mm - SHAFT LENGTH: 12.5mm

User questions & answers

Question: Will this handle 11.1v 3s lipo
Answer: Yes it will fit and is a great motor but the XL5 Bandit will hold any 540 or 550 series motor. If your looking for speed without upgrading the esc it will hold up to a 15t. The lower the turn the faster the motor!!! Hope this helps
Question: Where do you get pinion gears for this small of a shaft
Answer: Not sure of the stampede, but 27 turn is considered stock class. So probably same as stock, if the stampede was a brushed motor setup from factory. Lower turns = faster spindle speeds/less torque, higher turns = slower spindle speeds/more torque. Also low turn motors require higher amperage, so check the specs of your ESC before buying non-stock motors. You can get more information on http://techexperience.net/go/rc/

Tenshock RC906 2400KV 6 Pole Brushless Motor For 1/14 1/10 Axial Wraith Crawler Black Dia.3.175mm …

Based on 51 reviews Check latest price

Product description

Descriptions: RC906 is specially made for 1/10 1/14 Rock Crawler.

Specifications: -9 slot -6 pole with high torque

Length:50mm Dia.:36mm Shaft Dia.:3.175mm

  • Tenshock RC906 2400KV 6 Pole Brushless Motor
  • 1/10 1/14 Axial Wraith Crawler
  • 6 Pole Brushless Motor
  • High Torque Efficiency Less Heat
  • Big Power Fast Accerlation

User questions & answers

Question: Is this a 540 motor
Answer: Yes I ran this motor on 3s in a Tamiya crawler. Ran it pretty hard and it didn't get much temp in it at all. Go for it
Question: Is it waterproof
Answer: It's a standard 1/8" shaft Amazon has them in different pitch.
Question: Will the connectors fit in the mamba x
Answer: Yes it is. The axial 27T turn brushed motor comes stock in the Axial Deadbolt RTR (Ready to Run) versions!
Question: Can this work in a traxxas slash 4x
Answer: If your car has the AE-5 speed control you can use 3 cells lipo battery, that will make the car faster too

RC4WD Z-E0005 540 Crawler Brushed Motor 35T

RC4WD

Based on 177 reviews Check latest price

Product description

This is the RC4WD 540 35T Crawler Brushed Motor. Min and Max Voltage Range: 2.4V-30V, Output Shaft: 0.12in / 3.1mm, Output Shaft Length: 0.43in / 11mm and Body OD: 1.39in / 35.5mm.

  • FEATURES: Steel chrome plated case Tuned for rock climbing and scale driving Polished bushings.;INCLUDES: RC4WD 35T 540 size Brushed Crawler Motor with Wire Leads and 4mm Male Bullet Connectors.

User questions & answers

Question: Will this fit my RGT 1/24 crawler
Answer: Hi,It is not 540 motor, Its lenght is 49.5mm Dia.36mm Shaft Dia.3.175mm
Question: Would this work well in redcat rockslide 1/8 scale super crawler? stock is a 100t and i would like to gain a bit more speed
Answer: Water resistant .. no electric motor is waterproof .. the bearings are sealed but not rubber grommet sealed
Question: how fast would this make a 1/5 scale exceed maxstone 1/5 sacle
Answer: My Tenshock 906 has 4mm connectors. Castle’s website says Mamba X also has 4mm connectors so you should be good.
Question: shaft size
Answer: it can, but keep in mind that the Slash is run by a 550 size motor, 12T if Brushed and the VXL (Brushless) in 3500kv.

Globact Rc Motor 550 21T Brushed Motor for 1/10 RC Scale Rock Crawler Off-Road Car TRAXXAS TRX4 TRX6 Redcat Axial SCX10 SCX10II AXI03007 JL 90046 RC4WD D90

Based on 140 reviews Check latest price

Product description

The motor is suitable for 1/10 rc Trail Crawler car HSP HPI Wltoys Kyosho brushed TRAXXAS trx-4 trx-6. It has long-lasting performance with virtually maintenance-free operation.

Features:

Motor size:550, 3.175mm output shaft.

Virtually maintenance-free operation and long-lasting performance.

Integrated cooling fan pulls cool air through the motor to keep temperatures down.Heat-resistance running motors allow faster speeds, longer runtime, and extending motor life.

Precision balanced rotor, smoothness for best reliability and maximum RPM.

Suitable for 1/10 rc Trail Crawler car HSP HPI Wltoys Kyosho brushed TRAXXAS trx-4 trx-6.

Notice: The motor wire is not welded, so you need to weld it yourself

2 types optional:

550 21T Brushed Motor

Size: 550

Turns: 21T

Watts: 91W

Max voltage: 6-8.4V

Max Amps: 48A

IO: 1.4A

Resistance: 0.0043

KV(RPM/Volt): 21T

Max RPM: 12900

Diameter: 36mm

Length: 55mm

Length of extend shaft: 11mm

Shaft diameter: 3.175mm

Weight: 231g

Package weight: 233g

Package size: 7.5*4*4cm

550 29T Brushed Motor

Size: 550

Turns: 29T

Watts: 71W

Max voltage: 6-8.4V

Max Amps: 39A

IO: 1.4A

Resistance: 0.0043

KV(RPM/Volt): 29T

Max RPM: 10500

Diameter: 36mm

Length: 55mm

Length of extend shaft: 11mm

Shaft diameter: 3.175mm

Weight: About 231g

Package weight: 234g

Package size: 7.5*4*4cm

Package list: 1*RC 550 motor

  • Motor size:550, 3.175mm output shaft.
  • Virtually maintenance-free operation and long-lasting performance.Precision balanced rotor, smoothness for best reliability and maximum RPM.
  • Integrated cooling fan pulls cool air through the motor to keep temperatures down.Heat-resistance running motors allow faster speeds, longer runtime, and extending motor life.
  • Suitable for for 1/10 RC Off-Road Car TRAXXAS TRX4 TRX6(Replace Upgrades 3975R,3975) Axial SCX10 SCX10II AXI03007 JL 90046 RC4WD D90
  • Notice: The motor wire is not welded, so you need to weld it yourself

User questions & answers

Question: Should I be worried about putting this in a boat
Answer: No
Question: Will this fit in the DeeRC 9206e
Answer: You know for the price you really have nothing to lose. I am running 2 in my clod buster as a crawler and I have just enough top speed and great low end torq
Question: Will this work for bezgar truck
Answer: As said in the other answer, this is too small for a 1/5 scale. Also, it really isn't very fast in a 1/10 scale, even on 3s lipo. It goes faster than my normal walking pace, but it isn't fast by any means. It does have good torque for climbing, though.
Question: Will it work in my traxxas trx4 sport
Answer: It will fit traxxas,axial ,and Robinson racing pinions

RC4WD Z-E0004 540 Crawler Brushed Motor 45T

RC4WD

Based on 90 reviews Check latest price

Product description

This is the RC4wd 45T Rock Crawler Electric Motor. FEATURES: Equip or upgrade Any 1/10 rock crawlers for morelow end pull and more speed then a 55TPreinstalled bullet connectors, no soldering requiredYOU WILL RECEIVE: 45T Rock Crawler Electric Motor with bullet connectorsREQUIREMENTS: Compatible speed control for rock crawler motorsSPECIFICATIONS: Shaft diameter: 3.2mm (0.12")Shaft length: 12.5mm (0.49")Can diameter: 36mm (1.4")Can length: 50.75 (2")Weight: 164g (5.8oz)Mounting Pattern: 25mm (0.98") Wire length: 115mm (4.5")Input Voltage: 4+ cells (12VDC) max

  • FEATURES: Steel chrome plated case Tuned for rock climbing and scale driving Polished bushings Built-in capacitor to minimize glitching High torque magnet and rotor.;INCLUDES: RC4WD 45T 540 size Brushed Crawler Motor.

User questions & answers

Question: Will this work in my vaterra ascender
Answer: Dear customer It can be used on boats. Note: the motor can be splashed, not soaked in water
Question: Can I run it with a 2s lipo
Answer: Dear customer Compatible, will make your car faster
Question: Can it run on my traxxas stampede 2wd
Answer: Dear customer Not compatible
Question: Would this motor be ok to run with ae2 esc on a scx10 honcho
Answer: Dear customer Compatible have a good day

GoolRC 540 45T Brushed Motor with 60A Brushed ESC Combo for 1/10 RC Rock Crawler Climbing Car

Based on 41 reviews Check latest price

Product description

This combo includes GoolRC 540 45T brushed motor and 60A brushed ESC, which provides both quality and performance at an affordable price. The motor boasts some great features such as high power output, heatsink design, replaceable brushes, and the ESC features multiple protections. What you needed is all included in the combo!



Motor specifications:

Brand: GoolRC

Type: 540 45T

Max voltage: 7.4V

Max current: 1.82A

RPM: 16500

Screw hole: 4 * M3

Shaft length: 12mm

Shaft dia: 3.175mm

Motor dia: 36mm

Motor length: 53mm



ESC Specifications:

Brand: GoolRC

Continous current: 60A

Burst current: 360A

Power supply: 2~3S LiPo, 5~9S NiMh battery

SBEC: 6V/3A

Item size: 33 * 27 * 20mm (without cable)

Item weight: 34g



Package Information:

Package size: 10.5 * 8 * 6cm

Package weight: 248g

Gift box package



Package List:

1 * GoolRC 540 45T Brushed Motor

1 * GoolRC 60A Brushed ESC

2 * Motor Connecting Cable

  • With 6V/3A SBEC output; easily programmed and compatible with pocket-sized program cards.
  • High purity copper windings maximize efficiency, a precision-balanced rotor, smoothness for best reliability, and maximum RPM.
  • High strength magnets for unmatched brush-motor performance, excellent torque, and long-run times.Direct-solder wiring tabs for flexible soldering options. Dual-ball bearings design.
  • Direct-solder wiring tabs for flexible soldering options. Dual-ball bearings design.
  • Multiple protection features: low voltage cut-off protection / over-heat protection / throttle signal loss protection.

User questions & answers

Question: Is this set waterproof? Also will this work for an axial AX10 deadbolt
Answer: No...this is not an ideal motor for that vehicle.
Question: Which program card works with this? It’s not clear if the goolrc program card works on this brushed model
Answer: Yep. It'll be fine.

NQD RC Car Off-Road Vehicles Rock Crawler 2.4Ghz Remote Control Car Monster Truck 4WD Dual Motors Electric Racing Car, Toys RTR Rechargeable Buggy Hobby Car (Red)

Based on 551 reviews Check latest price
  • DOUBLE-SIDED DRIVING: 2-sided driving allows you to drive on both sides and enjoy the special driving experience ( For more exciting car stunts, please enjoy the video on the product page). With a range of up to 260 feet and highly responsive steering and throttle, the ergonomic transmitter with 2.4 GHz control system ensures superior control.
  • ONE-KEY TRANSFORM FOR ON-ROAD & OFF-ROAD: Front and rear dual motors, 4 wheels drive and transformable body makes the car more flexible and provide strong power torque to move on any terrain easily and stably & brings you a great speed experience. Move on grass, sand, small rocks, rugged roads and other off road terrain.
  • UNIBODY CONSTRUCTION: Special“Bionic spine “designed in this car Make it more fun and convenient, twist transform as you control. Protect the car from Collision crash drop for longer life span.
  • TRANSFORMERS MODELLING, LONG LAST TIME: The design is inspired by the Transformers. NQD new version RC car will give your kids a childlike, fashionable, special driving experience. Equipped with 4.8V 700mAh high-capacity battery, it can play for a long time.

User questions & answers

Question: How fast can it go
Answer: Very fast!
Question: We gave this to our son for Christmas. One of the wheels broke off on the first day of use. Is there a warranty available
Answer: Contact the seller/manufacturer they answered our questions right away and were very easy to work with.
Question: How do you install the battery in the car
Answer: Use a screwdriver to disassemble the battery cover, then align the battery connector with the wiring, and then re-cover the battery cover. Specific steps you can check out our product packaging. There are detailed schematics in the introduction. Thank you very much for your support.
Question: Why is the red light blink on the controller
Answer: It’s waiting to make a connection with the car. Once you turn the car power on the light will be solid instead of blinking.

FullfunRC Waterproof Brushed ESC with Dirtproof Switch for 1/10 Traxxas HPI Redcat Tamiya RC Truck, Buggy, Short Course Truck and Rock Crawler

Based on 186 reviews Check latest price

Product description

Input

Lipo  2S  Capacity≤3500mA/20C

Ni-MH  5-6 cells  Capacity≤3500mA/20C

Output

Continuous current: 45A/8.2V

Peak current: 350A/8.2V, ≤10ms

BEC output current: 2A/5.6V

BEC input current: ≤3A/5.6V

Brushed Motor compatible

540 size motor > 12T

550 size motor > 12T

Other size motor> 12T or RPM<[email protected]

Model compatible: ≤1/10 scale touring car, buggy, short course truck, monster truck, crawler

Cutoff Function

Voltage cutoff:  a. 2S Lipo: cutoff ≤6.6V,  or>10.5V;  b.Ni-MH: cutoff ≤4.5V

Overheat cutoff: cutoff >100℃, resume <85℃ 

Mode: Practise Mode and Crawling Mode for choosing

ESC Instruction

Throttle Setup:

Switch on the transmitter first, and then the ESC, put the throttle trigger on a neutral position, wait for self-detection of ESC and automatic throttle correction(about three seconds). After the self-detection done, you will hear four different tone of ‘Doo’ sound and the ESC is ready to use.

Mode Setup:

Practise Mode - Switch on the ESC first and press the setup button, release when you hear ‘doo’ sound.

Crawler Mode - Switch on the ESC first and press the setup button, release when you hear ‘doo doo’ sound.

Battery Setup

Ni-MH Battery: When using Ni-MH battery, press the setup button first and switch on the ESC, release when you hear ‘doo’ sound.

Lipo Battery: When using Lipo battery, press the setup button first and switch on the ESC, release when you hear ‘doo doo’ sound.

IMPORTANT: The ESC may not compatible with CoolRC TG3 Radio settings. We will offer more details for resetting CoolRC TG3 very soon for users using TG3.

  • 45A Brushed ESC Waterproof for 1/10 electric RC trucks, buggies, crawlers
  • IMPORTANT: May not compatible with CoolRC TG3 Radio due to Radio setting problem!
  • Input: Lipo 2S≤3500mA/20C; NiMH 5-6 cells≤3500mA/20C; Output: Continuous current: 45A/8.2V; BEC output current: 2A/5.6V
  • Brushed Motor compatible: 540, 550 size(>12T)
  • With voltage cutoff and overheat cutoff; Practice mode and crawling mode.With Dirtproof switch

User questions & answers

Question: Will this work with the older 90's Novak or Futaba receivers
Answer: I don't think so. The set I got had no drag brake and no programing. I highly recommend the HW wp-1080. Waterproof and lots of options for programing
Question: Anybody put this in an old traxxas rustler with original brushed 20t stinger motor to replace the old mechanical speed controller
Answer: in the manual it specifies what program card to use however, the problem is to date i have found no one with a clear answer. some say other goolrc cards works while others say they dont while contacting goolrc results in not even a reply back from teh company. best is to use it as it comes out of the box if you have already made the purchase and in the future buy soemthing different from a company with more reputable customer service.
Question: is reverse
Answer: Yes, really a great motor! I modified my redcat crawler with two rc4wd 540 motors.
Question: Will this work for a axial scx
Answer: I ran a 2s for a couple months then switched to 3s. I used a 13t pinion gear with stock spur. No overheating for me. Runs great.

DANCHEE RidgeRock - 4WD Electric Rock Crawler - 1/10 scale - RTR

danchee

Based on 692 reviews Check latest price

Product description

"The Danchee Ridgerock is a super affordable 1/10 scale rock crawler with front & rear multi-link suspension, front and rear transmission, two high-torque electric brushed motors, and multi-select 4 wheel steering. With the touch of a button, easily switch between steering modes for front wheel steering, rear wheel steering, four wheel steering, and four wheel crab steering. These modes are easily accessed while driving, on-the-fly, right from the transmitter. The Danchee Ridgerock is ready to run and includes a 7.4v 1500mAh rechargeable battery pack, USB battery charger, and 2.4GHz radio system. The Danchee Ridgerock is the perfect rock crawler for the beginner, at a price that can’t be refused. Get the Danchee Ridgerock RTR rock crawler today, and join the RC crawling community. "

  • 4WD rock crawler, 2.4GHz radio, 4-mode 4 Wheel steering, 2 steering servos, Lightweight plastic chassis, Solid axles, Motors on axles (MOA), Multi link suspension, Aluminum capped oil filled shocks.
  • Tunable suspension, Adjustable ride height, Adjustable toe angle, Tunable shocks, Selectable shock positions. Realistic crawler body with molded plastic roll cage, scale offroad tires, Scale beadlock rims.
  • 2x High torque brushed electric motors, 2 in 1 ESC/Receiver, 2x Powerful steering servos, 3-channel 2.4GHz pistol grip radio w/ selectable 4-wheel steering modes.
  • Assembled & Ready to Run - Includes 7.4v 1500mAh Li-ion rechargeable battery & USB Charger cable (plugs into regular USB outlet) - Requires AA Batteries for transmitter.

User questions & answers

Question: Is there a way to change spur or pinion gears
Answer: The original parts numbers are in the book. But looks very complicated to do. Not like other types of RC trucks. And the modified parts to fit would be very hard to find. Not your normal spur & pinion set up. It is a "Crawler"..put up a good rock pile,obstacle course & try your skills to keep it Crawling. Only thing that stops it is when the center balances on a rock. Y You may want to shop for a "Rock Racer" though.
Question: The all gear is metal
Answer: I run a 3s lipo spektrum 2200mah 30C mudslinger XL tires on stock bead locks plus DSSERVO steering servo's 20kg I run the crud out of it & no breakage .... they sell out fast but always make more ... my fave truck !!
Question: What size body is it comparable to? Thanks
Answer: : I put a 1/10 scale Jeep Renegade Truck Body on my Danchee. It had a 6 inch body with but the wheelbase on the body was about 5 mm shorter but still looks great . You need to find a body width of 6 in. And a wheelbase that is as close as you can get it
Question: What kind of batteries are included
Answer: Mine was packaged with a 7.4 volt 2 cell Lithium Ion battery. It's basically two 18650 cells shrink wrapped together. They are decent quality cells I believe made by LG judging by the color that I could see on the ends. Mine was a 1500 mah capacity which gave a run time of around 45 minutes in the crawler. The battery compartment will hold different size and types of cells even full size Lipo or 6 cell nimh. I can't remember if it came with transmitter batteries but those are 4 AA. Hope that helps.

DYS QUICRUN 1060 Brushed ESC 60A 2-3S LiPo Waterproof for RC 1/10th Touring Cars Buggies Trucks Rock Crawlers

DYS

Based on 113 reviews Check latest price

Product description

Model: 60A ESC

Dimension / Weight: 36.5*32*18 / 39g

Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank

Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse

  • Model: 60A ESC
  • Dimension / Weight: 36.5*32*18 / 39g
  • Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
  • Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse

User questions & answers

Question: Will this (lightly) run on 4S 14.8v
Answer: yes, we think so.
Question: Does this include a bec ? if so, what is the output voltage and amps
Answer: I recently used one of these to replace the mechanical speed controller in an old Tamiya rc car. It works well with no issues.
Question: will this work with a 11.1 volt lipo battery
Answer: no 100%, around 90% reverse
Question: will this work for a trx4 sport with a stock traxxas 21t motor
Answer: Give it a try and see. I've used other brands with tamiya kits & it worked out ok for me.

Latest Reviews

View all