13 best grizzly spindle sanders

Product description

Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited. You'll really appreciate this bench top version. With its large table surface and six different sanding drum diameters stowed neatly under the table the right sanding drum is a quick change away. Includes spindle wrenches table inserts and a 2-1/2" dust port. • Motor: 1/3 HP 110V single-phase 4A 60 Hz • 1725 RPM spindle speed • Toggle ON/OFF safety switch with locking tab • Extra large 20" x 14" table • Spindle oscillates at 72 SPM • 2-1/2" dust port • Comes with six 4-1/2" tall sanding spindles three 80 grit sleeves three 150 grit sleeves and 6 table inserts • Approximate shipping weight: 37-Pound.

• Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited
• You'll really appreciate this bench top version
• With its large table surface and six different sanding drum diameters stowed neatly under the table the right sanding drum is a quick change away

User questions & answers

Question:	When you say a bare tool does that mean that the spindles and sanding drums pictured are not included
Answer:	All spindles and sanding drums are included.
Question:	Can the table be angled
Answer:	No. The table is not adjustable.
Question:	Can anyone tell me the actual sanding area/height? The spindles are 4.5", but a portion of that is below the table. Can't see anything in the specs
Answer:	3.5" above the table or a little less if you are using the smallest diameter sanding spindles because of the top locking washer overhang.
Question:	What is the stroke up and down
Answer:	Not sure. Stroke is about 1”, maybe every two seconds.

Product features

1/3 Horsepower Benchtop Oscillating Spindle Sander

Nothing beats the versatility of an Oscillating Spindle Sander for smoothing curved edges, and when space is limited, you'll really appreciate this benchtop version. With its large table surface and six different sanding drum diameters stowed neatly under the table, the right sanding drum is a quick change away. Includes spindle wrenches, table inserts, and a 2-1/2" dust port.

Safety Paddle Switch with Removable Key

2-1/2" Dust Port

Includes: Six 4-1/2" Tall Sanding Spindles, Three 80-Grit Sanding Sleeves, Three 150-Grit Sanding Sleeves and 6 Table Inserts

Sanding Drums Store Neatly in the Base for Easy, Organized Access

Specifications:

• Motor: 1/3 HP, 110V, single-phase, 4A, 60 Hz
• 1725 RPM spindle speed (no load)
• Toggle ON/OFF safety switch with locking tab
• Extra large 20" x 14" table
• Spindle oscillates at 72 SPM
• 2-1/2" dust port
• Comes with six 4-1/2" tall sanding spindles, three 80 grit sleeves (1/2", 1" and 2"), three 150 grit sleeves (3/4", 1-1/2" and 3") and 6 table inserts

Product description

Remember when you used to have to sand those rounded edges by hand? With the WEN oscillating spindle sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN oscillating spindle sander features a smooth and quiet 1/2HP 3.5 amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber Drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, Table inserts and Spindle washers organized and accessible for Quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN product, Our oscillating spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN 6510 Oscillating Spindle Sander

Remember when you had to sand those rounded workpieces by hand? With the WEN Oscillating Spindle Sander you'll simplify the daunting task of sanding down curves, arcs, contours and other odd shapes. Expect our quiet 1/2HP 3.5 Amp motor to generate up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six easy-to-change sanding sleeves to allow for a full range of curves that match whatever the situation calls for. The ultra-convenient 1.5 inch dust port provides the option to attach a dust extractor to collect sawdust, ensuring a cleaner work surface while minimizing clean-up after the project.

Powerful Motor

Delivers 3.5 amps (1/2 HP) of sanding power, generating up 2000 RPM and 58 OPM.

Designed for Stable Operation

Pre-drilled holes for mounting along with the sturdy and heavyweight design maximize tool stability.

Cast Iron Worktable

The 15 by 11.5 inch worktable provides more than enough space for larger projects during operation.

Onboard Storage

Side rods and disc slots provide convenient storage for the wide variety of sanding drums and discs.

Ultimate Versatility

The WEN Oscillating Spindle Sander features six different-sized sanding sleeves (1/2, 3/4, 1, 1-1/2, 2, and 3 inches in diameter) and five different rubber drums for optimal compatibility with any size of workpiece. Whatever the shape of your project, expect the WEN 6510 Oscillating Spindle Sander to deliver the right size drum for the job.

Product description

Shop Fox W1831 Oscillating Spindle Sander w/ 5 Rubber Sanding Drums & 6 Sleeves

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

User questions & answers

Question:	Will this work on hardenable steel? 1/2 hp seems a little low for it
Answer:	No, this is for woodworking. You would need to purchase a grinder for harden steel.
Question:	Can a vacuum be connected to this unit
Answer:	Yes, you can hook up a vac to it. It has a 1 1/2" plastic connector that sticks out of the back of it. You will need to size your vac to fit over this.
Question:	Does it have a tilting tabletop
Answer:	No it does not have a tilting table but it is a very good sander.
Question:	What's the Spindle Stroke on this
Answer:	5/8"

Product features

Shop Fox W1831 Spindle Sander

This benchtop Oscillating Sander is ideal for smoothing edges after cutting with a bandsaw or scroll saw. Fifty eight oscillations per minute ensures even sanding and six sanding sleeve diameters let you sand a full range of inside curves down to 1/2-inch diameter.

Six Spindle Sizes

With six sanding sleeve diameters, this compact sander will handle just about any sanding task you throw at it. The on-board storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and easily accessible.

The various inserts included with the W1831 are used to close the gap between the table insert and drum which reduces the risk of pinching and offers more work support for your sanding jobs.

Built-In Dust Port

The built in 1-1/2-inch dust port ensures a cleaner shop and less airborne dust particles when connected to a dust collector.

Locking Power Switch

The locking power switch with removable key helps protect against unauthorized use and heavy duty cast iron table offer plenty of work support; all which make this a great bench top machine.

Product description

Remember when you had to sand those rough edges by hand? With the WEN variable speed handheld oscillating spindle sander, easily smooth out arcs, curves, contours, odd shapes, straight edges, and more. The WEN variable speed handheld oscillating spindle sander features a smooth and powerful 5-Amp motor. The sanding spindle oscillates between 50 to 90 times per minute, with an RPM that can be set anywhere from 1800 to 3200 rotations per minute. Our package includes four sanding sleeve sizes (1/2 in., 3/4 in., 1 in., And 1-1/2 in.) and three rubber Drums (3/4 in., 1 in., And 1-1/2 in.), providing you a Spindle diameter to match whatever the situation requires. Quickly transform this unit into a benchtop spindle sander with the included Clamps and mounting pad. Simply place the unit upside down on the surface of your choice, and secure it into place for a reliable stationary sanding machine. The adjustable guide Plate provides a straight edge for consistent and reliable material removal. The 1-1/2-inch dust port attaches to the dust Collection system of your choice, helping to control sawdust and minimize cleanup. This unit is also compatible with the WEN 5932SPC replacement sanding sleeves. And because it's a WEN product, your portable spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a nationwide network of experienced service technicians. It's time to make any difficult sanding task a breeze. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Lightweight and portable design allows for easy handheld sanding in hard-to-reach places
• Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware
• Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke
• Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles
• Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty

User questions & answers

Question:	Does it have the inserts that go around the smaller sleves (1/2") so you can stand smaller things or are smaller things going to fall into it
Answer:	There is a large 13mm washer that is assembled onto the shaft before the sanding sleeve that helps prevent any small work pieces from entering under the base plate. If you have any other questions don't hesitate to reach out to us at 1-847-429-9263 (M-F 8AM-5PM CST)
Question:	Could you use a 2" sanding sleeve with this sander
Answer:	No, I don't believe you can. The arbor is of a fixed height.
Question:	What kind of sandpaper are these, garnet? Aluminum oxide
Answer:	Aluminum oxide.
Question:	Does this sander use standard sanding sleaves
Answer:	No, it does not!! The sleeves that come with this sander are only 3" in length. Once again, someone answering a question without knowing what they are talking about. The WEN sanding sleeve kit Amazon recommends for this sander are the standard 4 1/2" long and are meant for the WEN sanding table...not this portable sander. I suppose you could cut them to 3", but the kit also includes 2 larger diameter sleeves that can't be used with this sander. Big Horn is the only manufacturer I can find on Amazon that makes 3" long sanding sleeves.

Product description

The Oscillating Spindle Sander 50-300 from Rikon Power Tools is a specialized sander for the fast and accurate sanding of curved board edges. The abrasive sleeves mounted on the machine’s spindles oscillate up-and-down 15 to 16 inches, 29 times per minute while the spindle spins. This speed and accuracy provide more efficient abrasive cutting action. This spindle sander features a powerful 0.5 horsepower motor, all steel gearing, ample cast iron tilting table, and metal housing. This sander also includes 5 spindle diameters ranging from 0.5 inches to 2 inches and 6 table inserts, making this a valuable machine for every shop. 4-1/2″ long abrasives. This is a must-have for any shop that is doing contour sanding. Whether you're sanding curves, bevels, or other contours, this sander will provide a beautiful, scratch-free finish.

• RIKON SPINDLE SANDER - This oscillating spindle sander is a specialized sander for the fast and accurate sanding of curved board edges.
• FAST AND ACCURATE - Abrasive sleeves mounted on the machine’s spindles oscillate up-and-down 15/16”, 29 times per minute while the spindle spins, providing more efficient abrasive cutting action.
• ALL STEEL - This oscillating spindle sander is made from all steel and heavy duty.
• INCLUDES - Powerful ½ HP motor, all steel gearing, ample cast iron tilting table, metal housing and 5 spindle diameters (½” - 2”) with 6 table inserts. Weighs: 76 lbs.

User questions & answers

Question:	Can you buy a 3" drum for this sander
Answer:	based on what I have read and the drop in plate that will accept a 3 inch drum. yes, the real question, do you really need one. May be nice to have, but in all my experience, nice is not always necessary. If you are in big production runs that require that size, then it might be worth the additional cost. Just looking at the need from a different view point.
Question:	What is the length of the spindles
Answer:	The sanding sleeves are 4.5" long. The overall metal spindles that the sleeves mount on are 6.75" long.

• Pack of 18 oscillating spindle sander sleeves
• 3 each of 1/2 inch, 3/4 inch,1 inch,1-1/2 inch, 2 inch and 3 inch sanding sleeves; various diameters to fit your task perfectly, 4.5" in length
• Aluminum Oxide Abrasive providing high performance and durability
• Excellent for sanding, resurfacing or other types of metal and wood working
• Fitting most spindle sanders in the market: RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more

User questions & answers

Question:	will these work on a Jet sander
Answer:	It is a medium sized backpack. The front pocket is 5". It is a good size for a large purse.
Question:	does any one sell 40 grit
Answer:	Not a big bag, but it more than meets my needs. Perfect size if you don't need something big. Use it to carry coputer and other daily stuff, and also as a carry on when I travel.
Question:	How long are they? I need them 4 1/2" long
Answer:	Made in China.
Question:	Will these fit on the sanding sleeves with the shop fox w1668 drill press
Answer:	To recalibrate simply "turn the device on in clean open air and it will automatically calibrate". I test mine by standing in close proximity outdoors to an exhaust source (lawn mower or running vehicle) . It is used in a 43 year old single engine aircraft . It's worth the price & was a question on the insurance policy if I used a CO detector .

Product features

LotFancy Oscillating Sanding Sleeves

LotFancy Sanding Sleeves are excellent for sanding, resurfacing or other types of metal and wood working.

These Spindle Sander Sleeves are perfect accessory to sand, shape, groove & finish soft & hard woods, fiberglass & more.

Our LotFancy Oscillating Sanding Sleeves provide 6 sizes (total 18pcs/pack), to fit your machine and task perfectly.

The Aluminum Oxide Sleeves achieve the ultimate in performance, value, durability and versatility.

Applicable Models

These Sanding Sleeves fit most standard oscillating sanders, such as:

Ryobi OSS450, DELTA SA350K, Grizzly G0739, WEN 6510,

POWERTEC OS1400, Rockwell RK9011, Shop Fox W1831, Triton TSPS450, etc.

Replacement: Steelex D3836,WEN 6510SP80, POWERTEC 11204, etc.

Specification:

Length: 4-1/2”

Diameter: 1/2”,3/4”,1”,1-1/2”, 2” & 3”

Grade: 80 Grit

Quantity:18pcs/pack

• GIVE SURFACES THE FINISH THEY DESERVE: Use the ABN Aluminum Oxide Spindle Sanding Sleeves 18-Pack – 4.5” Inch Length, Assorted 80 120 240 Grit, 1/2" to 3” Inch Wood Sandpaper whenever you need high-performance abrasive sleeves for professional material removal, sanding, and resurfacing
• MAKE YOUR WORK EASIER: Instead of sanding those tough, rounded edges by hand, you can abrade, sand, finish, and polish hard or soft woods from bare wood to the deepest and finest of finishes with these simple sleeves
• USE YOUR SANDER: Designed for use with oscillating and spindle sanders
• BUILT TO LAST: Constructed from paperboard and aluminum oxide to prevent loading and increase longevity
• CONTENTS: Package includes 80-grit sleeves, 120-grit sleeves, and 240-grit sleeves; Includes 1/2", 3/4", 1", 1.5", 2", and 3" inch diameter spindle sleeves for each grit; All sleeves are 4.5” long

User questions & answers

Question:	do they fit craftsman mo
Answer:	it comes in 60 grit , 80 grit and 120 grit
Question:	what size and make spindles do these sanding drums use
Answer:	1/4 inch shank
Question:	Who sells sanding drums these can be used on? I'm not interested in an oscillating sander at this point. Would like to use in drill press
Answer:	This Kit contains:4 Drum Diameters: 1/2" Diameter ----- 3/4" Diameter ----- 1" Diameter ---- 1-1/2" Diameter 12 Sanding sleeves, 3 for each drum diameter, each diameter will have one fine, one med and one coarse.

Product features

About the ABN Spindle Sanding Sleeves 18-Pack

Instead of sanding those tough, rounded edges by hand, you can abrade, sand, finish, and polish hard or soft woods from bare wood to the deepest and finest of finishes with these simple sleeves.

Give your surfaces the finish they deserve with the ABN Aluminum Oxide Spindle Sanding Sleeves, 18-Pack.

CONTENTS

Set includes 80 grit sleeves, 120 grit sleeves, and 240 grit sleeves.

Constructed of Aluminum Oxide, each sleeve is 4.5 inches long.

PROFESSIONALLY FINISH ANY SURFACE

For professional removal, sanding, and resurfacing, use these spindles to abrade, sand, finish, and polish hard or soft woods even in a tight radius.

QUICK INSTALLATION

Designed for oscillating and spindle sanders.

These 4.5” long sleeves fit directly over the rubber sanding drum metal shaft.

BUILT TO LAST

Cloth-backed for better results with no scratches, sliding, skipping, or uneven sanding jobs, the paperboard and aluminum oxide prevents loading and increases longevity.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong presence on Amazon, shipping over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

Product description

This sander features a 6 x 89-inch belt that oscillates 3/4-inch vertically at fifty two times per minute! It also has a quick release belt tension lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 HP motor. The W1730 has a 26-7/8 x 12-inch cast iron main table for edge sanding and a 10 x 11-1/2-inch cast iron auxiliary table for spindle sanding. Three spindle sanding drums, measuring 1-1/2, 2, and 3-inches in diameter are included for sanding smaller curved surfaces. Other features include a 180 degree adjustable miter gauge, two 4-inch dust ports, a powder-coated finish, and a removable fence.

• Quick release belt tension lever
• Graphite coated platen
• Oscillating sanding belt
• Sanding belt size: 6-Inch by 89-Inch
• Drive drum Diameter: 7-Inch

User questions & answers

Question:	Can you move the end table (where the spindle sander is) down low enough to use the end of the actual 89" belt for contour sanding
Answer:	Yes it is
Question:	Just wondering where this (w1730) sander is made? the grizzly clone claims to be made in taiwan
Answer:	dimensions are listed in the product description- takes a bit of scrolling

Product features

Shop Fox W1730 Oscillating Edge Sander

This sander features a 6-inch x 89-inch belt that oscillates 3/4-inch vertically at 52 times per minute. It also has a quick release belt tension lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 HP 240V motor.

Vertical or Horizontal Sanding

The sanding angle of the oscillating edge sander can be adjusted between 0 and 90-degrees to provide horizontal, vertical or variable angle sanding. Additionally, the table moves both vertically and horizontally to accommodate various workpieces shapes and thicknesses and to allow appropriate alignment with the sanding surface.

Cast Iron Main Table

The W1730 has a 26-7/8-inch x 12-inch cast iron main table for edge sanding and a 10-inch x 11-1/2-inch cast iron auxiliary table for spindle sanding.

Other features include a 180 degree adjustable miter gauge, two 4-inch dust ports, a powder-coated finish, and a removable fence.

Spindle Sanding Attachment for Contour Sanding

The W1730 comes with a spindle sanding attachment for sanding curved surfaces. The included sanding drums measure 1-1/2, 2, and 3-inches in diameter and are matched with three table inserts for tight clearance between the table and drum. The spindle table provides workpiece support for drum sanding operations. Although the sanding drum does not oscillate along with the belt, the vertically adjustable table accommodates various sanding operations and allows for movement to reduce spot wear on sanding sleeves and drums.

Optional D3741 Aux. Downdraft Table

The optional Shop Fox D3741 Auxiliary Downdraft Table improves dust collection when workpieces are sanded on the spindle drum or end of the sanding belt.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Featuring design improvements like a relocated and sealed on/off switch (to prevent dust infiltration), and shelves for storing your five complete spindles, the JET 708404 JBOS-5 5-1/2 Inch 1/2 HP Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase is a true powerhouse. Its tilting table, spindles with threaded ends, and robust induction motor tackle the toughest sanding projects with ease.

Oscillation Reduces Friction and Ensures Consistency

The JBOS-5 creates a one-inch oscillating action that reduces friction heat, thereby protecting your wood pieces and prolonging the life of the sleeve. Its main spindle support also runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for reliable, consistent performance job after job.

Additionally, the oscillation gears run in a sealed, lubricated box to prolong their life and durability.

Powerful Induction Motor for Reliable Performance

The JBOS-5 comes equipped with a powerful 1/2 HP induction motor that easily handles all your sanding projects. And thanks to the table inserts and a built-in, two-inch dust port, you won't have to worry about dust and debris falling into the motor and marring its performance, compromising your view of the workspace, or causing injuries and accidents.

Tilting Table for Bevel Sanding

To give you the flexibility to handle a variety of jobs and material sizes, the JBOS-5's table tilts to 45 degrees. This tilting ability also accommodates bevel sanding projects.

Safety Features for Smooth Operation

Designed for safe and smooth operation, the JBOS-5 boasts several innovative safety features. First, a removable on/off safety switch prevents accidental start-ups. There are also built-in storage racks to keep spindles and table inserts handy and within safe and easy reach. Finally, the benchtop includes four non-skid rubber feet to keep the machine stable during use.

Quick Spindle Changes and a Scratch-Free Finish

You can trust the JBOS-5 to deliver precise, quality results in less time. Spindles have threaded ends for quick, easy changes, and a one-inch spindle ensures a scratch-free finish.

The JBOS-5 measures 17 x 20.8 x 18.2 inches (WxHxL), weighs 82 pounds, and is covered by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Complete 1/4-, 1/2-, 5/8-, 1-1/2 and two-inch spindle assemblies, two round table inserts, and two oblong table inserts.

From the Manufacturer

With a large cast-iron workspace and table that tilts to 45 degrees, this 1/2 hp sander can accommodate even the heaviest sanding project. The 1-inch spindle has an oscillating action that provides a scratch-free finish and prolongs the sleeve life. Other features include non-skid rubber feet to prevent movement while in use, removable safety switch, and a built-in dust port. Sander comes with 1/4-, 1/2-, and 5/8-inch spindles, 1-1/2-and 2-inch complete spindles, and two round and two oblong table inserts.

FEATURES

• Large cast iron workspace to handle all your projects Table tilts to 45 degrees handle all bevel sanding projects
• The 1" spindle oscillating action provides a scratch free finish and prolongs sleeve life
• Powerful 1/2 HP motor can accommodate even the heaviest sanding projects
• Four non-skid rubber feet prevent the machine from moving while in use
• Built in diameter of dust port to collect the dust before it becomes airborne
• Removable safety switch
• Oscillation gears are encased in a lubrication box to greatly prolong life and durability.

STANDARD EQUIPMENT

• Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies
• 2 round table inserts
• 2 oblong table inserts

SPECIFICATIONS

Model: JBOS-5

Table Size (in): 14 1/2 x 14 1/2

Table Tilt (Down): 0 - 45 degrees

Spindle Speed (RPM): 1,725

Oscillations (per minute): 30

Length of Oscillations (in): 1

Motor (TEFC): 1/2 HP, 1Ph 110V

Net Weight (lbs): 77

• VERSATILITY: Table tilts up to 45°.
• LONG LIFE: 1" oscillating action protects wood, and prolongs sleeve life.
• EFFICIENCY: Spindles have threaded ends for fast, easy changes.
• CONVENIENCE: Built-in storage racks keep spindles and table inserts nearby.
• SAFETY: Removable on/off safety switch prevents accidental start-up.

User questions & answers

Question:	What is the maximum spindle diameter that can be fitted
Answer:	I believe a 3”. I am not sure if jet still offers a 3” spindle, but they did when I got mine. But I had to go to the jet web site. Good luck.
Question:	what's the foot print of this machine and how high is it
Answer:	Base bottom is 12" square, top plate is '19 high. It's a fine instrument and I enjoy using it.
Question:	If the sander spindle is 5 1/2" will the 6" sanding sleeve work on it
Answer:	On my Jet sander, the spindles and sleeves vary from 5-1/2 to 6". (The smaller diameter sleeves are the longer ones for some reason. ) I see no problem putting 6" sleeves on 5-1/2" spindles, and vice versa. I like this sander a lot, by the way.
Question:	Is the table cast iron
Answer:	Yes the table is cast iron with steel center inserts.

Product features

SPINDLE ASSEMBLIES AND SLEEVES

This sander includes five sanding spindles and sleeves (100 grit).

• 1/4" x 6"
• 1/2" x 6"
• 5/8 x 6"
• 1-1/2" x 5-1/2"
• 2" x 5-1/2"

TABLE INSERT PLATES

Four table inserts are provided, to prevent dust and debris from falling into the motor, and help protect operator.

• 3/4" Round
• 2" Round
• 3/4" Oblong
• 2" Oblong

LARGE 14-1/2” TILTING TABLE

Table tilts up to 45° to accommodate bevel sanding projects.

Product description

Introducing the 4.5 Inch Sanding Sleeves Assortment by POWERTEC.

 

This spindle sander sleeves set was designed to give your surfaces the perfect shaping and finish they deserve.  Commonly used for sanding and polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects.   Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results.  This cost effective combo includes 6 120 grit sandpaper sanding sleeves in 6 different diameters to ensure you have exactly what you need in for perfect project craftsmanship in your workshop. 

 

COMPATIBILITY

• For use with most oscillating and spindle sanders.
• For best results and brand specific match, search Amazon for POWERTEC MODEL OS1400 & OS1000

 

POWERTEC is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: Professional grade aluminum oxide (120 grit) sanding sleeves – Pack of 6, (1 of the following diameters: 1/2", 3/4", 1", 1-1/2", 2", 3")
• PERFECT FIT: These 4 ½ inch long spindle sander sleeves fit directly over the rubber sanding drum metal shaft
• PROFESSIONAL FINISH: Perfect oscillating sanders for woodworking projects, and used for sanding, resurfacing, abrading and polishing some metals and most soft and hard woods
• MADE TO LAST: Each sanding sleeve is carefully constructed from premium aluminum oxide to increase longevity and prevent loading
• COMPATIBILITY: Works with oscillating spindle sanders, including models from POWERTEC (item# OS1400, OS1000), Delta, Fox, ENLON, Rockwell, Grizzly, Jet, Ryobi, and Wen

User questions & answers

Question:	Will these fit the Ryobi spindle sander spindles
Answer:	they work fine on mine
Question:	Does anyone use these on a central machinery sander from Harbour Freight
Answer:	Do not have Harbor Freight ..... Just in case this might help .... I use mine on a Grizzly oscillating sander Model G0739.
Question:	will these sanding sleeves fit a craftsman model 351.215000 oscillating spindle sander
Answer:	I don't have or have ever used a craftsman model oss. Im sure it an excellent oss. However, I will say that im very confident that the sleeves are universal and will work on your model. I purchased an off brand locally for mine and they worked perfectly well. I think you will find this to be true for you as well. The sleeves are held by compressing the rubber drum, so the tolerance if close will work tightening more or less.
Question:	Will the sanding sleeves fit a ridig spindel sander
Answer:	yes that is what I am using it on

Product features

The 4.5 Inch Sanding Sleeves by POWERTEC

These spindle sander sleeves were designed to give your surfaces the perfect finish they deserve. Commonly used for sanding & polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects. Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results. This cost effective combo includes six 120 grit sandpaper sanding sleeves.

Product description

About Us:

KEILEOHO is a professional Sanding Sleeves solution provider. We devoted ourselves to providing our consumers with products with high quality, high strength and beautiful appearance. Your satisfaction is our first priority.



WHY CHOOSE Us:

KEILEOHO 18PCS Sanding Sleeves Set for Spindle Sanders – Your ideal option for oscillating sanders. Perfect for material removal, resurfacing, shaping, deburring and sanding edges and internal surfaces.



>>>WHY CHOOSE KEILEOHO SANDING SLEEVES?

● For professional removal, sanding, resurfacing, finishing and polishing, this 18pcs sanding sleeves set is your ideal option.

● Made of premium Aluminum Oxide Abrasives, these sanding sleeves are built to last longer than normal sanding papers.

● Actually make your work easier: Instead of processing those rough surfaces by hands, these sanding sleeves can fit most oscillating sanders in the market, making your work much faster and easier.



>>>SPECIFICATIONS:

Length: 4-1/2”

Diameter: 1/2”, 3/4”, 1”, 1-1/2”, 2”, 3”

Grade: 60 / 150 / 240 Grit



>>>PACKAGE CONTENT:

6 x 60 Grit Sleeve Diameters: 1/2", 3/4", 1", 1.5", 2", 3"

6 x 150 Grit Sleeve Diameters: 1/2", 3/4", 1", 1.5", 2", 3"

6 x 240 Grit Sleeve Diameters: 1/2", 3/4", 1", 1.5", 2", 3"



To know more about the product, the packaging and return policy, please don’t hesitate to contact us. Hope you have a great shopping experience!

• 18PCS VALUE PACK – When you ordered this sanding sleeves set, you will receive 18 high-quality spindle sander sleeves for different uses. Made of premium Aluminum Oxide Abrasive, which stays sharp longer, our sanding papers are durable and of high performance.
• 60 / 150 / 240 ASSORTED GRITS – 6 units with different diameters of each assorted grit. Our spindle drum Sander sleeves are perfect for shaping, deburring and sanding edges and internal surfaces, they can actually make your work easier.
• 6 DIFFERENT DIAMETERS FOR VARIOUS NEEDS – There are 1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. spindle sleeves for each assorted grit, which allows you to choose the best suitable size for your sanding object. Ideal for material removal, resurfacing and more.
• WIDELY APPLICABLE – Our sanding sleeves are built to last and can fit most oscillating sanders in the market. Compatible with RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more.
• WORRY-FREE SHOPPING – Please check the package content as you received the product. At KEILEOHO, we focus on product quality and value the shopping experience of our customers highly. Every product purchased from us comes with a 24/7 friendly customer service. Whenever you have a question, please feel free to contact us!

Product description

The POWERTEC 71002 Sanding Abrasive Cleaning Stick is designed to remove dust, debris, gum and other residue – bringing items like belt sanders and sanding disc back to life in an instant. It extends the lifespan of the abrasive and cleans it safely without damaging or harming your sanding equipment. It’s the go-to option for belt sanders, sanding disc and other abrasives and common wood turning applications.

• INCLUDES: Abrasive Cleaning Stick 8-1/2" x 1-1/2 " x 1-1/2" Large Size
• FUNCTION: Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the grit
• PREMIUM: Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobs
• EASY TO USE: Hold eraser stick against your selected abrasive to remove the built-up, clogged dust, debris and particles – returning a like-new look to your sanding surface
• VERSATILE: Ideal for cleaning sanding belts, disc sanders, drum sanders, skateboard grip tape, rubber bottom shoes (Not intended for plastic or use on conveyor-feed type sanders)

User questions & answers

Question:	Will this work to get scratches off of a pocket knife blade
Answer:	Yes, it supports. It will mostly depend on the RCA and HDMI cable used. For example , if a HDMI 2.0 or higher in the near future when 2.1 will be available , you can get up to 144Hz , Refresh Rate related.
Question:	What are these made of
Answer:	Yes it has one
Question:	Will this clean Flap Discs
Answer:	Sound Slayer is compatible with 4K HDR pass-through at up to 60Hz via HDMI.
Question:	Anybody used this with metal? I use a belt sander for sharpening different things
Answer:	Ya xbox can pass through no problem, but you wont get the higher frames hdmi 2.1 promises because this is only rated for 2.0

Product features

The Sanding Disc and Belt Cleaning Stick by POWERTEC.

Our Sanding Belt Cleaning Stick works like a charm - every time. Its the perfect abrasive belt cleaner - it successfully cleans whatever sanding component you're using. This sanding belt cleaner stick is easy to use and it cleans so effectively - for a great user experience through many a successful projects.

Works great for:

FUNCTION

Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the grit.

EASY TO USE

Hold eraser stick against your selected abrasive to remove the built-up, clogged dust, debris and particles – returning a like-new look to your sanding surface.

PREMIUM

Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobs.

Product description

Delta, 31-741, 5 Piece Drum 100 Grit Sleeve Sanding Kit (3/4", 1", 1-1/2" 2", 3") FOR B. O. S. S. Spindle Sander

• 5 Pc. Size Assortment: 3/4 in. , 1 in. , 1 1/2 in. , 2 in. , and 3 in.
• Includes Rubber replacement drum
• Fits DELTA SA350K B. O. S. S. Bench Oscillating Spindle Sander
• 100 Grit