5 best drill attachment

• * * * ✔ 25Piece Drill Cleaning Attachment Set（Brush&Scouring Pads&Scrub Sponge), Includes:8piece of different purpose drill power scrubber brushes, 12 Piece different stiffiness Scouring pads，3 Piece scrub sponge with 4 inch backer and 1 piece Extended Reach Attachment
• * * * ✔5 Different Stiffiness Nylon Bristle: (White Bristle:Soft，Yellow and Green Bristle: Medium, Red Bristle: Stiff，Black Bristle: Hardest) :clean your bathtub, grout, upholstery, bathroom surface, floor, tile, shower, toilet and carpet etc, Nylon bristles will not scratch surfaces of them.
• * * * ✔12Piece DIFFERENT STIFFNESSES Scouring Pads and 3 Piece Scrub Sponge : perfect for kitchen cleaning Oven Stove Cooktop Sink Cast Iron Skillet Frying Pan Pots and Pans . The green pads are a bit stiffer and thicker than the red and grey ones.
• * * * ✔Time Saving: Get tired of the boring household cleaning? Try Holikme Power Scrubbing Drill Brush Cleaning brushes and Scouring Pads that attach to any cordless drill or impact driver, become a powerful cleaning tool. Get stubborn cleaning jobs done faster and achieve a deeper clean, definitely a good partner for your household cleaning. (DRILL IS NOT INCLUDED)
• * * * ✔Good Satisfaction – Every Holikme Drill Brush Attachment cleaning Product is good working performance and high quality.

User questions & answers

Question:	Are these for impact drivers or drills
Answer:	I am not 100 percent sure they would work with impact driver drills but they work amazing with a drill. I use then to clean outdoor rugs and patio furniture
Question:	When do you use a pad vs a brush
Answer:	Pad on face of tile, brush on grout and door tracks.
Question:	Can these be used with an angle grinder with drill chuck attachment
Answer:	All the shafts are hexagonal, so should work fine with any drill chuck, straight or angle... the only problem I had was the extension shaft not holding onto the brushes because of a faulty clip on the quick-release feature.
Question:	Where to get smaller or cone pad to use in curved sink
Answer:	Have you got good scissors?

Product features

Holikme Drill Brush

Material：Nylon bristles stiffness

Brushes clean your bathtub, grout, upholstery, bathroom surface, floor, tile, shower, toilet and carpet etc

The green pads are a bit stiffer and thicker than the red ones. kitchen cleaning such like Oven Stove Cooktop Sink Cast Iron Skillet Frying Pan Pots and Pans etc

• * Cordless drill not included.

Product description

Product Advantages

1: Drill wheel steel brush includes 3"(75mm)*1pc, 2"(50mm)*1pc, 2-1/2"(63mm)*1pc, 1-4/5"(45mm)*2pc and wire cup brush 2"(50mm)*1pc.

2: High carbon steel materials have excellent life and rust resistance.

3: Wire bristle brush for drill is suitable for metal and wood. It is used to clean metal surfaces and also removes rust, paint and corrosion.

4: The wire wheel handles the weld slag and burrs of all metal parts.

5: 1/4" shank fits all drills.

6: In the intense use process, the line will not be lost and bent, and long-term use will not cause asymmetry and deformation.

7: Available in a variety of shapes to work in a variety of areas.

• 6 Wire Wheel for Drill of Different Diameters: Includes 3"(75 mm) *1pc, 2"(50mm)*1pc, 2-1/2"(63mm)*1pc, 1.57"(40mm)*2pc wire wheel brush and 2"(50mm)*1pc wire cup brush. The larger size is suitable for large areas of fast work, and the smaller size allows for tight spaces and fine work.
• Avoid Breaks and Deformations: The metal wire of the drill brush uses 0.012 Inch carbon steel crimped wire and excellent fixing, the wire will not be lost and bent during the intense use.
• Suitable For a Variety Of Surfaces: The wire wheel brush set removes rust, paint, dust and burrs from surfaces such as metals and wood, and can also be used to level weld spatter.
• Rough Treatment For The Surface: Wire grinder brush for drill can be used for surface adhesion treatment before painting, spray coating and electroplating. It can also be used for surface paint peeling and grinding.
• Can Withstand High Work Intensity: The Rotary wire wheel can withstand the high speed of the 4500RMP and the robust 1/4 inch Arbor to avoid the risk of breakage. Long-term use of the wheel brush will not be asymmetrical and distorted.

User questions & answers

Question:	Does this release extremely fine dust (e.g. when used on concrete)? How quickly does the dust settle
Answer:	its threaded
Question:	Are these brushes made in China
Answer:	The second

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.

• * * ✔ Drill Cleaning Attachment Set（Brush&Scouring Pads&Scrub Sponge), Includes: 6 shape of Medium drill power scrubber brushes, 9 Piece different stiffnesses Scouring pads，3 Piece scrub sponge and 4 inch backer.
• * * ✔ 6 shape of brushes clean your bathtub, grout, upholstery, bathroom surface, floor, tile, shower, toilet and carpet etc, Nylon bristles will not scratch surfaces of them.
• * * ✔9 Piece DIFFERENT STIFFNESSES Scouring Pads and 3 Piece Scrub Sponge : perfect for kitchen cleaning Oven Stove Cooktop Sink Cast Iron Skillet Frying Pan Pots and Pans . The green pads are a bit stiffer and thicker than the red ones.
• * * ✔Time Saving: Get tired of the boring household cleaning? Try Holikme Power Scrubbing Drill Brush Cleaning brushes and Scouring Pads that attach to any cordless drill or impact driver, become a powerful cleaning tool. Get stubborn cleaning jobs done faster and achieve a deeper clean, definitely a good partner for your household cleaning. (DRILL IS NOT INCLUDED)
• * * ✔ Good Satisfaction – Every Holikme Drill Brush Attachment cleaning Product is good working performance and high quality.

User questions & answers

Question:	What is the difference between the 3 product offerings; the red, yellow and blue sets
Answer:	each pad consist of a different grade and harshness that allows you to clean different services and different levels of clean. The more aggressive pad is green with the other colors offering lighter cleaning and scrubbing.
Question:	Can it be use to remove old wax off floor
Answer:	Yes, but that will be very time consuming, but with strip solution it should work just as the big machine
Question:	Are all these accessories useful
Answer:	I think it's very useful, no need to buy other products, one set is enough
Question:	Which size cordless drill is this set compatible with? Some are only compatible with 1/2 inch drills
Answer:	They are a 1/4" speed chuck, which means they are compatible with every drill except your kids "little tikes" play set drill.

Product features

Holikme Drill Brush

Material：Nylon bristles stiffness

Brushes clean your bathtub, grout, upholstery, bathroom surface, floor, tile, shower, toilet and carpet etc

The green pads are a bit stiffer and thicker than the red ones. kitchen cleaning such like Oven Stove Cooktop Sink Cast Iron Skillet Frying Pan Pots and Pans etc

• * Cordless drill not included.

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. The speed tip design reduces walking on start, and the no spin keeps the bit secure in the drill. Includes 14 bits sized from 1/16 to 1/2-Inch in a plastic tough case.

• Speed Tip Reduces Walking
• Ideal for drilling in metal, wood, and plastics
• No spin shanks
• Includes tough case container to keep bits organized
• Titanium Coating for Longer Life

User questions & answers

Question:	will it work for cement or brick
Answer:	No they are not specified for concrete.
Question:	where are these made
Answer:	Was going to purchase these until I found out they were made in China. Just searched, “made in USA drill bits” and I found some awesome ones! If these companies won’t make their products here, its up to us consumers to buy American. Haven’t we learned by now? Always add made in usa to any search.
Question:	is there a 1/4 inch drill bit included in this set
Answer:	Yes, this set includes a 1/4" bit.
Question:	This 3 flat sides design, is it compatible with hex type of attachment? I am assuming yes, but wanted to make sure
Answer:	Yes, the drill bits are 1/4" Hex shank