10 best brushless motors

• Name: Electric Car Scooter Brushless Controller Tester.
• Applicable Machine: 24V/36V/48V/60V/72V.
• Working Temperature: -20°C-50°C.
• Dimension:10.5x7.5x2.5cm. Power: 9V battery(included).
• Quickly test whether the brushless motor coil is good or bad. Quickly test whether the brushless controller good or bad.

• 1700Kv (RPM per Volt)
• Works with 2-4s Li-Po Battery (6.5v - 16.8v)
• Recommended to use a 30A ESC
• Works great with 7x6, 7x4, or 6x6 propeller
• Very powerful medium sized motor

User questions & answers

Question:	Will this work on a outrunner plane
Answer:	Yes this motor will work. But it depends on the size of the plane. Looks like this will work on a park flyer foam plane.
Question:	Is this motor an equal replacement for a multiplex bl-o
Answer:	Not exactly, depending on your exact application. This motor spins slower per volt(look up what kv is.) This is a great motor, but wont spin the same exact rpm as the multiplex. But with more torque
Question:	What is the proper size to mount an o-ring prop saver on the shaft of this motor
Answer:	The motor shaft size is 3mm.
Question:	Will this motor fly a 2 pound model
Answer:	Yes

• New version unibell XING 2306 2450KV Motor provides the most incredible power and thrust in the lightest weight,sturdy structure and high-quality materials make iFlight XING performs like a beast
• The iFlight XING series motor is characterized by support 4S. The 4mm Titanium alloy shaft and high-quality N52H magnets surrounded by high-temperature resistant windings
• These 4 pack 2306 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups
• There is a non-slip design on the contact surface between the motor and the propeller to increase friction and to improve durability; Multiple heat dissipation holes are designed to dissipate heat continuously
• Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively

User questions & answers

Question:	You ever run them on 5s
Answer:	dear buyer,the XING 2306 2450KV motor suit for 2-4s ,if you like to use on 5s ,we recommend XING 2208 2150KV Motor.

• 4 poles 12 slot Hi-torque motor design.
• CNC machined 6061 T6 billet alumium heatsink can.
• High RPM ABEC5 oversized bearings.
• Universal fit all 1/10 brushless cars-multi-mounting system for M3 screws.
• Precision balanced rotor, smoothness for best reliability and maximum RPM.

User questions & answers

Question:	How many turns is this motor
Answer:	It's brushless. No turns.
Question:	Will it work for traxxas rustler 2wd
Answer:	Yup. Just make sure you gear it correctly. Put a small pinion on it. It's outside (the can) is the size of a normal 1/10 scale, 3650 motor, but the inside (the rotor) is the size of an 1/18 scale motor. You can tell by the fins. I ran a similar motor on my Stampede for years. When it got hot, I geared it down. I finally put that motor into a drifter that still runs great. And went with a real 3650 size brushless motor in the Stampede. This motor, I put into my sons drifter.
Question:	Can I put this on a axial bomber
Answer:	I don't see why you can't as long as its 1-10 scale. Although you will need a brushless ESC to make it work. I could be wrong but isn't the bomber a hill climber meant to be driven at lower speeds?
Question:	Wasn't there 2 motor size options? Available prior to ordering
Answer:	I didn't see any others.

• Max Efficiency: 80%
• Max Efficiency Current: 4-10A (>75%)
• Motor Dimensions: Φ27.5 x 30mm
• Shaft Diameter: Φ3.17mm

User questions & answers

Question:	Is this combination compatible with a Naza m Lite controller
Answer:	Don't know the specks for Naza. But, as far as I know, it will work with any 3 pin PWM controller. I ran it (to test) from my jr100 (or jr300, cant remember) receiver from my buggy. Works great. Note: this setup is not reversible from controller. Only hardwire reverse, as in, flip around any two wires between ESC and motor.I got it for my mini CNC mill project, not sure how well it will perform for it's intended purpose.
Question:	Will these work for a tricopter
Answer:	Those will work for a tricopter. I used them on a quad-copter (X525V3) I built and am using them on a new hex-copter I'm building now. Gary
Question:	What size are the screws for the outside of the mount
Answer:	M3
Question:	When i apply power to the motor, it just sits there and vibrates back and forth, not spinning in any direction. is this normal? how do i fix it
Answer:	I had the same thing happen, after troubleshooting it with three different motors and checked all my wiring used voltmeters etc and plug the same motor into another ESC it worked fine ,it was a bad ESC!

• The XING-E series is a very strong and powerful FPV motor for FPV racing, great value choice with well known XING performance. Focuses on quality, the XING-E series is affordable motors that are strong and durable
• This 2207 sized motor features a high-strength 4MM steel hollow shaft, single strand winding for performance, M3 shaft screws and larger 9X4X4MM NSK bearings
• The iFlight XING series motor is characterized by support 6S
• These 4 pack 2207 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups
• Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively

User questions & answers

Question:	So if i crash and break a motor you will fix or replace it
Answer:	Crashing and subsequently breaking the motor are usually not grounds for motor replacement. These motor are pretty tough to begin with.
Question:	Can I use these to upgrade my 4s Nazgul5 to 6s
Answer:	Should work fine. I run mine on 6S.
Question:	What motor timing should I use through blheli m or blheli s
Answer:	I’ve been using DSHOT 600 with no issues.
Question:	All 4 motors lock clockwise... is this correct? did they make a mistake when shipping? i thought you were supposed to have 2 nuts locking cw and 2 ccw
Answer:	dear buyer, all the motors sold on our store are 4pcs cw . not have ccw.

Product features

What's New in XING-E?

* Steel shaft, instead of titanium alloy

* 6061 aluminum top, instead of 7075 aluminum

* Not convex and different bell design

Features

-High-strength 4mm Steel shaft

-N52H High-temperature magnets, NSK bearings

-16x16mm hole pattern

-Single strand copper winding

-Hex bolt shaft set screw

Package included:

- 4 x XING-E 2207 1800KV Motor

- 4 x M5 Nylon Propeller Nut

- 16 x Mounting Screws

• High-torque and high-efficiency.
• Removable/Replaceable rotor.
• High RPM ABEC5 oversized bearings.
• High purity copper windings maximizes efficiency.
• Precision engineered for maximum energy conversion.

User questions & answers

Question:	What size pinion fits this motor
Answer:	It fits 2mm bore pinion. The 2.3mm in description is misleading and SHOULD be corrected
Question:	can we use a 3s lipo
Answer:	Yes, it's really up to your ESC though. I will say the motor was much smaller than I thought, be sure it's the size you need.

• This Motors are less noise and stable.
• With 3.5mm bullet conenctors,save welding trouble.
• Fit for F330 F450 S500 X550 X525 Quadcopter.
• Due to different people use different frames and it requires screw sizes are also different, so it didn't come with screws.
• Suggest to use our 1045 propellers,ASIN:B0823NNTKD

User questions & answers

Question:	None of the props I've tried work with this without modification. 1045 is a good size but the axle has flats and is ~8mm in diameter. Are there any
Answer:	You can have a try 1045 Self-Tightening Propellers: https://www.amazon.com/RAYCorp-Self-Tightening-10x4-5-Propellers-Pieces/dp/B07H1HXCGJ/ref=sr_1_12?keywords=1045+props&qid=1562035838&s=gateway&sr=8-12
Question:	What size Nuts do these motors use to hold on the props
Answer:	Dear,the size of Nuts to hold on props was M6 size.
Question:	what size mounting screws do you use to mount these motors to the frame arms
Answer:	M39 M3 Hexagonal Hex Screws 9mm
Question:	What size are rhe bullet connectors? 2 mm
Answer:	Dear,it's 3.5mm bullet connectors.

• This brushless motor is recommended for monster truck and 1/8 scale off road applications, up to 6S (22.2V). Amp Rating: 120 A, Max Input Voltage: 25.2 V.
• Neu-Castle motors feature high quality over sized Bearings, sintered Neodymium magnets, superior electromagnetic design.
• Shaft: 5 mm, Connector: 6.5 mm gold. Bearings: Oversize ABEC-1 Front/Rear.
• Motor Diameter: 39.98/41.78 w/fins, Motor Length: 75.18 mm, Weight: 15 oz (424 g).
• Add to your cart~ If you have any question,please contact us by email.We will reply within 24 hours.

• 【High Torque】4 pole 12 slots high-torque motor design, 3.175mm shaft diameter
• 【High Quality】Precision balanced rotor, smoothness for best reliability and maximum 43600 RPM
• 【1/10】Suit for 1/10 RC Scale Electric Short Course Truck car Traxxas Slash Redcat ARRMA AXIAL HSP HPI Wltoys Kyosho HELION
• 【Waterproof】Waterproof, precision engineered for maximum energy conversion. Perfect after-sales service, manufacturer directly supply products.
• Best results when used with 60A 120A 150A ESC.

User questions & answers

Question:	Will this brushless motor work / Fit in my brushed Redcat Racing volcano epx
Answer:	Dear customer It can be used, but it needs to be used with 60A Brushless ESC have a good day
Question:	will it bolt right in to my Traxxas stampede? The connectors don't look the same
Answer:	Yes, but you need a brushless esc, like the vxl version. The motor size is correct. Brushed motors have 2 wires (brushless has 3). This motor also has 4mm connectors, pretty standard except for smaller/bigger scale rc vehicles
Question:	Is it a drop in for the xinlehong produced 9125 trx4 i have a 80 amp ecs for duel motors alreafy on hand
Answer:	I wouldn't recommend that motor mine went bad the same day I put it in wind up having to ship it back I would go with Goolrc they really hold up better or surpass they're pretty good for the price
Question:	Can it run 3 s lipo
Answer:	Yea.. but it burned up right after bought it was not impressed at all... no response from seller either..