12 best thermostat for reptile cage

• ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is there an instructional video on how to put the temperature controller and heating pad together? Or an instructions pamphlet
Answer:	Hello, you can plug the heating pad to this controller and set the desire temperature, place the sensor to where you want the temperature to be controlled(for example, into the soil) then it should start working. You can find the manual of this controller here: https://centurytimer.com/product_resources/BNQ-T7BH/Instruction-Manuals-for-Web-BNQ-T7BH.pdf
Question:	Can a heat lamp be plugged into it and control the heat like if it was a mat
Answer:	Is this accurate with a heat lamp?
Question:	Is it normal for this to make an audible clicking noise when it turns on? Just got mine set up and it clicks when it turns on
Answer:	Is there anyway to disable that clicking sound? I just got mine today and its right next to my bed so its really irritating clicking on and off every 5 minutes.
Question:	can this be used for 2 che lamps
Answer:	With the wattage and amperage it says it can supply it should easily be able to handle 2 lamps. Just run a strip off the plug and only have them 2 lamps controlled by the thermostat. AGAIN, as long as it will handle what they say it can handle. A 100watt bulb should only pull just under 1 amp.

Product features

BN-LINK Digital Heat Mat Thermostat Controller

BN-LINK Digital Thermostat Controller is your perfect solution to providing constant optimum temperature for a variety of uses. Our thermostat controller has an easy plug-in operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Effortless Set-Up

A manual is included with our thermostat controller. But with the simple interface, it won't be needed! Please follow these instructions:

1. Plug in the thermostat controller
2. Press and hold the "Set" button to enter the temperature setting
3. Press the UP/DOWN button to adjust the target temperature
4. Press the "Set" button again to complete the process

**Please note that there is a 2-3 degree buffering zone for the thermostat controller to turn your appliance on again**

Switch Between Temperature Units

To toggle between Fahrenheit or Celcius:

• Press and hold the DOWN button for 3 seconds for Celcius
• Press and hold the UP button for 3 seconds for Fahrenheit

Simply Plug Your Appliance In

Our BN-LINK heating thermostat controller has a simple design for the convenience of our customers. Plug in your appliance and watch our thermostat controller maintain the optimal temperature you've set for your needs.

Keep Your Pets Warm

Maintain perfect temperature control in reptile terrariums and small pet enclosures. Place the temperature probe where the heat source will target and watch your pets stay warm and happy.

Great for Seedling and Plant Germination Projects

Grow with BN-LINK. Our thermostat controller is ideal for maintain rooting temperatures in a tray and dome.

Variety of Uses

Help give your aquatic life a comfortable environment with the help of our thermostat controller.

Easy to Mount

With the mounting holes on the back of the thermostat controller, it allows you to customize your area. Mount anywhere you need the thermostat controller to be.

Product description

A temperature control system designed to be used with a wide variety of other Zoo Med terrarium heaters and cooling fans. The terrarium thermostat features a large LCD and is accurate to one degree Fahrenheit.

• Temperature control range: 50F to 122F. Controls Temperature by turning on heating devices in HEAT mode or by turning on cooling devices (e.g. fan) in COOL mode.
• Remote Temperature Sensor with 6 foot cable.
• Controls up to 600 watts of heating devices. Controls up to 150 watts of cooling devices.
• Built in memory stores settings in case of power failure.
• Alarm flashes and sounds when temperature reaches extreme high or low levels.

User questions & answers

Question:	Can I plug this into an extension cord? The cord is not long enough for where the terrarium is located
Answer:	Yes use a grounded extension
Question:	How long is the the temp probe
Answer:	It’s 6ft long
Question:	This is for 120 volts, right
Answer:	110 120 v common house hold plug
Question:	Does this device have a fail safe? Will it shut everything off if something happens like a malfunction
Answer:	No it will not but you can program a alarm if the temp either gets to hot or cold than your desired temp.

Product description

The Exon Terra Digital Thermometer is equipped with a remote sensor for accurate measurement and durability. This precision instrument comes with a programmable minimum and maximum memory setting which can be controlled with a single button.\n\the sensor is held in place with a suction cup, while the instrument can be mounted with hook & loop fastener (included) or it simply slides into place on an Exon Terra Compact Top or Linear Fluorescent Top.

• Digital Thermometer
• Accurate temperature indication
• Single button operated
• Remote sensor
• Minimum/Maximum memory

User questions & answers

Question:	Does it show fahrenheit as well as celsius
Answer:	Yes,included small button battery.
Question:	If I get the sensor wet while misting down my snake's tank will it damage the thermometer or make for an inaccurate reading
Answer:	Aquatic turtles would do better with a cuttle bone. It's a form of calcium they can nibble on verses you putting it in their habitat. I also work for a Pet store & that's what we do there. Not to mention I have a tortoise as a personal pet as well..
Question:	Is this compatible with a zoo med lighting hood
Answer:	Do not know...only calcium content is listed on label...which is calcium min 38%, calcium max 43%
Question:	Is it waterproof and how long is the cord to the sensor?, want to use it in a 600 gallon tank that is 2 ft. deep
Answer:	Absolutely. I keep a "capful" in all my Crestie enclosures. Of course, I feed them Crested Gecko Diet (CGD), a must and Crickets as well (dusted with calcium).

Product description

1. How Pymeter control temperature?

Temperature controller is actual Heating/Cooling controller, thus MUST SET ON-Temp to turn ON Heating/Cooling, and MUST SET OFF-Temp to turn OFF Heating/Cooling.

Heating starts at LOW Temp [ON-Temp(1oN, 2oN)], stops at HIGH Temp [OFF-Temp(1oF, 2oF)], thus for heating MUST SET 1oN(2oN) LESS than 1oF(2oF);

In heating mode, 1oN(2oN) is the minimum temp you allow, 1oF(2oF) is the maximum temp you allow.

Cooling starts at HIGH Temp [ON-Temp(1oN, 2oN)], stops at LOW Temp [OFF-Temp(1oF, 2oF)], thus for cooling MUST SET 1oN(2oN) GREATER than 1oF(2oF).

In cooling mode, 1oN(2oN) is the maximum temp you allow, 1oF(2oF) is the minimum temp you allow.

2. Reading temp is inaccurate?

Every Pymeter controller is calibrated before come out of factory, it is reading temp accurately!

Please don't compare it to common inaccurate thermostat、thermometer or temp gun. If you doubt Pymeter controller accuracy, please calibrate with ice-water mixture (it is 32F when ice is melting), and you will see which device is accurate then.

3. Beeper keeps sounding?

Probably it is the Alarm settings ( AL、AH、d7 ) you set are NOT the right temperature you want. AL is low temperature alarm(it sounds when current temp is AL or Lower), AH is high temperature alarm(it sounds when current temp is AH or Higher), d7 is difference alarm(it sounds when the temp deviation between sensor 1 and sensor 2 is over d7). If you don't need alarm function, please don't change the values of AL、AH、d7, the default values usually won't trigger alarm. You can factory reset by switching temp unit from F to C in setting.

Please download User Manual PDF in Product information.

• ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
• ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
• ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
• ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
• ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.

User questions & answers

Question:	The max temp is 210 Fahrenheit correct
Answer:	Yes, correct.
Question:	How do I change the probes from cool to heating in settings? What buttons do I press in what order
Answer:	Cooling and heating are relevant to the "turn on at 'x' temp" and "turn off at 'x' temp" if it is not working in your preference currently, try switching some measurements in opposites of each other.
Question:	How do we get a "Free New Replacement" as mentioned below
Answer:	Please contact support on www-pymeter .com or send message to us on Amazon directly.
Question:	Can you send me a copy of the instructions? Mine didn’t come with any
Answer:	Sorry for that. Please read/download the instruction via this link: https://www.pymeter.com/PY-20TT-User-Manual.pdf, any further question, just message us on Amazon directly :)

Product features

Pymeter Heating and Cooling Temperature Controller

Pymeter Digital Temperature Controller is easy to use, safe & reliable dual outlets thermostat. It is used as over temperature protection or automatic temperature control system with various electric appliances such as heaters for Reptile, Aquarium, Greenhouse, Home Brew, Fermentation, Accelerating Germination, Plant Grow Tent, Pet Breeding, Incubation, BBQ, Terrestrial Heat Control, Aquarium Cooling Fan, Electric Radiator, Electric Oven, etc.

Advantage compare to other Thermostat:

Parameters

Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F

Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F

Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A

Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault

Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.

Widely Applied

• 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
• 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
• 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
• 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
• 👏👏【Sensor Length 】2m / 6.56ft

User questions & answers

Question:	Does this only do heat? Is there a model that is soley for cooling
Answer:	Yes. It is only do heat and the time. We have one for cooling. It is ITC-308.http://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B011296704/ref=pd_sim_sbs_328_1?ie=UTF8&refRID=00PW2766SPNECBNVYWR0&dpID=417y0W4HFmL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
Question:	Does this product measure the humidity as well as the temperature
Answer:	Sorry, this ITC-306T cannot measure the humidity. However, we have a combination product that can control temperature and humidity. Pls see the link (https://www.amazon.com/dp/B01N56KEU6). Thanks!
Question:	Do I have to reset it every 24 hours? Or onceset is it good to go
Answer:	Once set, it stays set, even after power outages (of which I've had several since getting mine.)
Question:	Basically I am trying to keep the temperature between 80 and 85 degrees, this includes a heater and fan. How do I set this
Answer:	I initially found the flyer a little difficult to understand, but basically you have to set 2 variables, the target temperature and the temperature differential. So you would set the target temperature to 85 and the differential to 5 degrees. Thus if current tmp >= target - differential it shuts off. If current_tmp

Product features

Specification

• Temperature Control Range：-50~99 ℃，-58 ~ 210 °F
• Temperature Resolution：0.1°F
• Temperature Accuracy：± 2 °F (-58 ~ 160 °F)
• Temperature Control Mode：On/Off Control, Heating
• Input Power：100 ~ 240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC

Packing list

• ITC-306T Temperature Controller*1
• Instructions*1

Product description

Parameter:

Rated Voltage: 120V

Waterproof: IPX67

Frequency: 60Hz

Package included: 1* Reptile Heat Pad, 1* 3M adhesive paper

S: 6 x 8 inches, 120V, 8W L: 8x 12 inches, 120V, 16W XL: 8.5 x 18.5 inches, 120V, 24W



How to attach double-sided 3M adhesive:

1. Lie heat pad on flat surface.

2. Turn on the heat pad

3. As pad heats, the pad will become smoother and flatter which will make it easier to apply the 3M adhesive.



How to adjust the temperature of the pad:

Rotate the switch clockwise to turn on, then continue rotating clockwise to adjust temperature from low to high. Then rotate the switch counter clockwise to turn off.



HELPFUL HINTS:

1. When securing heat pad to terrarium make sure it is placed so that reptiles will not have direct contact with the heat pad.

2. For indoor use only.

3. Placing terrariums with an under-tank heat pad on household furniture may cause the furniture’s finish to discolor. Tikaton recommends using a terrarium stand.

4. For use on glass terrariums only. Do not use on wood, plastic, acrylic or any other type terrarium.



Note: The heating temperature of the pad will be affected by the environment, best results are obtained at a room temperature of about 68-86°F (20~30 °C) in winter and less than 113°F (45°C) in summer.

• UPGRADED DESIGN: Temperature can be adjusted manually. POWERFUL FUNCTION: Helps reptile for daily activity, appetite and metabolism. It can keep reptile tank warm without any harm to your pets and also won't disturb animals sleep pattern.
• Durable material: made of high quality PVC material, its soft surface can be flexible and folded. The heat mat is easy to clean, convenient to use and low energy.
• ENERGY-SAVING: This heater uses a solid state nichrome heating element Which only use 8 watts of electricity and costs only pennies a day to operate. HIGH EFFICIENCY: High-quality heating wire heating, stable performance and long service life.
• ATTENTION: Before using double-side tape to fix the tank, you must connect the power to let the surfaces of heating pad will be smooth so that paste better 3M sticker.
• APPLICATIONS: Ideal heat source for desert and tropical species of reptiles, amphibians and arachnids.

User questions & answers

Question:	What size for a 55 gallon tank
Answer:	the biggest size
Question:	How long does it take to heat up
Answer:	It starts heating up in a few minutes
Question:	What size would be great for a 30 gallon tank? Do both sizes have the same temperature
Answer:	Same temps just different sizes
Question:	What is the min/max temperature that the pad produces
Answer:	It doesn’t specifically say but you can get a thermometer to use inside the tank to get the temperature or use a plug in temperature regulator that will keep the temperature at what you set it

Product features

Adjustable Reptile Heat Pad

Give your furry and scaly pals the perfect home with the Adjustable Reptile Heating Pad by Tikaton. Ideal for desert and tropical species of reptiles, amphibians and arachnids, our temperature adjustable heating pad provides a safe, comfortable atmosphere for tanks ranging from 10-40 gallons, all while maintaining high-quality composites, energy efficiency, and a design that is both flexible and foldable.

Energy-Efficient

Energy-saving design uses only 8W of power

Versatile

Ideal for desert and tropical species of reptiles, amphibians and arachnids

Durable

Made from high-quality PVC material that is soft, flexible, and easily folded

Easy to Clean

Washing the heating pad as often as needed, with no hassle

Product description

Allows precise monitoring of both the temperature and humidity of your terrarium from one unit. Temperature and humidity levels are extremely important to the long term heath of your animals. Velcro backing enables easy removal for cleaning or relocation.

• Allows precise monitoring of both the temperature and humidity of your terrarium from one unit
• Temperature and humidity levels are extremely important to the long term heath of your animals
• Velcro backing enables easy removal for cleaning or relocation

User questions & answers

Question:	Do I need two of these for each side of my baby ball python's tank
Answer:	Depending on the size of the tank I I would say yes if its larger then a 50 gallon. If 50 50 gallon or smaller just put it in the middle.
Question:	I need a thermometer for my baby bearded dragon tank and I'm having trouble finding one that gives readings above 105. What is the top temperature
Answer:	The temperature gauge ranges from -20f to 120f. I find that the thermometer on this unit seems to be fairly accurate, but the hygrometer is questionable.
Question:	Do you need one for a veiled chameleon
Answer:	You need a thermometer + hygrometer due to their high humidity needs. They're awesome I also have one. The zoo med analog style(2) dial face does a great job.
Question:	Is there any way to set calibration
Answer:	I answered "no" until I figured out how to do it, duh. You pry off the clear lid at the ends and remove the paper with the coils on it. Turn the whole coil on the back to match another known, properly calibrated set of gauges. Set it down for 5 minutes, adjust again and again, if necessary, to get it perfectly calibrated to your other gauges. Then put it back together.

Product features

Zoo Med Economy Analog Dual Thermometer and Humidity Gauge

Allows precise monitoring of both the temperature and humidity of your terrarium from one unit.

• Temperature and humidity levels are extremely important to the long-term health of your animals.
• Hook and loop backing enables easy removal for cleaning or relocation.

Product description

This unit allows you to control up to 1000W with preselected temperature between 68F to 95F. Helps select and maintain consistent temperature with safety shutoff at 110F. Accurate, easy-set thermostat with status indicator. 3 power outlets and external temp probe.

• Controls up to 1000 watts with 3 power outlets
• Helps maintain consistent temperature for germination/rooting & reptiles
• Controllable range of 68°F - 95°F
• Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures
• LED heating indicator light and easy set temperature control with external probe for accurate reading

User questions & answers

Question:	I cant get my plugs to fit securly they only plug in half way. I think my unit is defective? Any suggestions
Answer:	You may have the plug in the wrong way or maybe the plug arms are to close together
Question:	I have mine connected to a heat mat and set on 89 degrees. It goes all the way to 95 before it turns off. Drops to 84 then turns on again. Why
Answer:	Is the 95-F reading from the controller itself or a separate thermometer? Try lowering the desired set temp to 83-84F (this should yield a continuous set temp of 89F). Some controllers require calibration and it sounds like your unit needs a five degree shift to hit a stable 89-F.
Question:	Does this one make bulbs turn on and off during the day or does it actually control bulb wattage/temp (proportional thermostat
Answer:	This is an on/off thermostat, not a proportional thermostat. It will turn your bulb(s) on/off throughout the day, but it will not adjust the amount of electricity going to the bulb to control the wattage/temperature.
Question:	Flashing red light? I have installed everything and the red "heat source" light keeps flashing. The green power light is on. What is going on? Thanks
Answer:	Same problem here. I've tried the "reset" options (unplugging and plugging) but same thing. I am returning this and getting the Zilla brand. I already have one, set up right next to this one and they are measuring the temp in the same cage... no blinking red light there.

Product description

Infrared Ceramic Reptile Heat Bulb:

Specifications:

Socket: E26;

Volt: AC 110-120V;

Watts: 150W;

Material: ceramic, NiCrAl;

Diameter of heating surface: 85mm;

Note: 1. Lamp surface temperature is too high, do not directly touch during it works; 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald ; 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment; 4. Please adjust the distance between the lamp and the pets, at least 35cm; 5. Please away from combustible or explosive materials；

Clamp Light:

Specification：

Volt: 120V;

Watt: Accepts up to 150W bulb (E26);

Reflector Diameter: 8.5 inch;

Cord: 6 feet;

18/2 SPT-2 cord clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants.

Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.

Digital Thermostat Controller:

Specifications:

Temperature control range: 40℉-108°F;

Temperature display range: 32℉-140°F;

Rated Voltage: AC 120V 60Hz ;

Max Loading: 8A 1000W ;

Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug. Digital thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.

Abnormal Warning: 1. If thermostat shows "E1", it means that the actual temperature is lower than 0℃ or 32℉; 2. If thermostat shows "E2", it means that the actual temperature is higher than 60℃ or 108℉. 3. If thermostat shows "E3", it means that the temperature sensor is not working properly. Please re-install the sensor；

• Multifunction: great for reptile and amphibian terrariums, incubating poultry heater, can increases blood circulation promoting health and healing.
• Perfect 24h heat source: heat bulb does not emit any visually detectable light, would not disturb pets sleep. 150W, E26 lamp base. Material: ceramic, NiCrAl. To avoid scald, please wait at least 1 hour to cool down after turning off the bulb.
• Multifunctional clamp light: scratch-resistant sleeves covered clamp would not leave marks on your surfaces, 360° adjustment and 8.5inch aluminum reflector can focus light where you need. Volt: 120V, Watt: 150W (E26). have convenient on/off button.
• Temperature range: digital thermostat provides temperature control between 40-108℉, temperature display range: 32-140°F. Support Celsius or Fahrenheit readout. Volt: 120V 60Hz; Max Loading: 8A 1000W. Do not immerse controller or probe into water.
• Package include: 1-pack 150W ceramic heat bulb, 1-pack digital thermostat (easy plug-in operation with LED illuminated indicator lights and three-prong grounded plug), 1-pack clamp light with 8.5 inch reflector.

User questions & answers

Question:	Where should the probe go if I'm using it for a hedgehog setup
Answer:	I just lay mine (I have two; one on each, diagonal end of the cage) on the top of the cage. Then I don't have to worry about my hedgie chewing on the electrical cords. I have thought about placing them under the canvas (the bottom) of the enclosure also. I know that my current readings are slightly warmer than the actual temp where the hegie is due to the fact that the probes are about 7-10 inches above him. These lamps/thermostats work so well. I'm very happy with them. (Note: The digital temp tends to run about 2 degrees cooler than the thermostat setting)
Question:	does it light up or just heat
Answer:	These bulbs are heat only.
Question:	Does the temp control actually adjust the temperature on the ceramic element
Answer:	No. The temp control is like a thermostat and adjusts the environment temp. The ceramic element is either off or on.
Question:	Can 1 thermostat be connected to 2 lamps
Answer:	Thermostats like this have a one time fuse to prevent overload. The thermostat will have a Max amp rating. For instance, I ran two heat mats on this just fine with a splitter but when I added my space heater it exceeded the max amo rating and broke the one time fuse. This fuse is not replaceable.

Product features

Specifications

• Socket: E26
• Voltage: AC 110-120V
• Watts: 150W
• Material: Ceramic, NiCrAl
• Color: Black
• Diameter of heating surface: 85 mm
• Height: 100 mm
• Package Includes: 1-pack 150W ceramic heat bulb

About Clamp Light

1. Supply powerful light anywhere you require it with this 8.5" Clamp Light.
2. It is constructed with a scratch-resistant vinyl sleeve and a spring-powered steel clamp with an adjustable ball joint, which allows you to easily position the lamp almost anywhere.
3. The lamp includes an easy to use, energy efficient on/off switch that saves energy.

• Volt: 120V
• Watt: up to 150W
• Reflector Diameter: 8.5 inch
• Lamp Type: type A lamp (E26)
• Cord: 6 Feet
• Material: Aluminum

Easy to Use

• Fahrenheit Light: It will be lighting when the temperature display in Fahrenheit.
• Celsius Light: It will be lighting when the temperature display in Celsius.
• Heating Light: It will be lighting when the output is working.

NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment

Product description

"Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. "

• The only safety ETL certified thermostat on the market
• Provides constant optimal temperatures for germination/rooting
• Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
• LED heating indicator light and Digital temperature control
• Controllable range of 68°F - 108°F, Choice of Celsius or Fahrenheit readout (press Up or Down button to change)
• 1 Year Warranty

User questions & answers

Question:	Can I use this product for a dog heat mats (Kane poly heat mat)? Thanks
Answer:	I'm sure you can. I use mine for snake heat mats. Just make sure you put the probe in a place where the dog cant move it. I drilled a hole in the bottom of the enclosure and placed the probe inside, with the heat mat under the cage. The probe reads the surface temperature of the cage floor and not of the heat element. I have 3 of these thermostats and they all work really well for animal heating. They are often a few (+-4) degrees off though.
Question:	How many watts can this handle
Answer:	Manual states: "Do not exceed a total of 1000 watts of heating devices plugged into thermostat."
Question:	I lost my instructions and cannot figure out how to change the thermostat. I have emailed Hydrofarm and had no response. Can someone help me
Answer:	Press and hold down the SET button for at least 3 to 6 seconds. The display will start to blink. Press the up and down buttons to increase or decrease the desired temperature. When you are through selecting the temperature, press and hold down the SET button for at least 2 seconds. I say 3 to 6 seconds because I count manually and I'm sure I am off a second or two. Hope this helps.
Question:	Can I plug 3 heating mats into a power strip and plug the power strip into the Digital Thermostat's AC output
Answer:	I currently have 2 heat mats plugged into a strip that in turn plugs into the Digital Thermostat. Been using this setup for 2 years, with no issues. I love it and believe that it would easily support 3 mats. Keep in mind that my mats and tray are all identical, since there is only 1 prob for the monitor.

Product features

Jump Start Heat Mat Thermostat

Providing bottom heat is one of the most effective ways to improve germination and rooting. Our Heat Mat Thermostat ensures that your plants’ roots enjoy consistently ideal temperatures by precisely controlling and maintaining the heat output of the mat in accordance with the temperature you select.

Jump Start Commercial Heat Mats

For larger projects, use the Heat Mat Thermostat to control our mega-sized, heavy-duty modular Commercial Heat Mats. These mats will provide uniform heat for hundreds of seedlings or cuttings. Rugged, waterproof, and durable, with waterproof connectors. Daisy-chain up to four mats together.

Terrarium Warming

Hydrofarm heat mats are also great for heating terrariums and pet enclosures for reptile, rodent, and arachnid keeping. When used with the Jump Start Heat Mat Thermostat, heat mats can be controlled to provide the precise level of warmth your pets require to flourish.

Jump Start Germination Station

Our Germination Station pairs perfectly with the Heat Mat Thermostat. It’s a mini propagation system that comes with everything you need all in one box—watertight base tray, seedling insert, humidity dome, UL-listed heat mat, and rooting additive. Just add seeds and you're good to grow.

• Face icon comfort indicator: Humidity temperature gauge features face icons to indicate DRY/COMFORT/WET air condition quickly to notify you to adjust your humidifier or dehumidifier accordingly and ensure you will always live in the most comfortable environment
• High accuracy: Temperature and humidity sensor is highly accurate to ±1 Fahrenheit/Celsius and ±2%-3%, making it ideal for measuring fluctuating readings like in a greenhouse
• Fast refresh: Digital indoor thermometer refreshes every 10 seconds to keep you updated about the latest changes in temperature and humidity readings
• Compact display with large numbers: Thermometer indoor outdoor features a compact LCD display with large bold numbers, allowing you to read the termometro digital from any angle and distance; Fahrenheit or Celsius selector
• Multiple mounting options: Humidistat has 3 mounting options - Tabletop Stand / Magnetic Back / Hanging Hole, place the wall thermometer anywhere you wish such as living room, baby room, kitchen, greenhouse, guitar room, office and cellar

User questions & answers

Question:	Maximum temperature
Answer:	Spec's say 158 F \70 C. I have never tested extremes.
Question:	Can you use this in a vehicle
Answer:	I dont see why not. It has a magnet on the back. Battery might die quick if left outside in cold temps.
Question:	What humidity range will this cover? Will it go very low, for desert conditions
Answer:	I have seen it down to 8% in my office that I use this in.
Question:	where is this made
Answer:	Made on China

Product features

ThermoPro TP49 Wall Thermometer Indoor Humidity Monitor

With highly accurate readings and a wide measurement range, TP49 is the perfect home thermometer to keep your family's living conditions optimal. Room temperature monitor features a face icon indicator to show the comfort level to ensure you’re always aware of changes to your home/household with just a quick glance. With multiple mounting options, you can put the device anywhere, it can be used as baby room thermometer, desk thermometer, refrigerator thermometer, reptile thermometer and more!

Fast Response and High Accuracy

Room thermometer and humidity gauge refreshes every 10 seconds to keep you updated about the latest air condition changes, so you can avoid discomfort. Inside thermometer with smart sensor, provides high accuracy to ±1°F/°C for temperature and ±2%-3% for humidity.

Comfort Level Indicator

Always be aware of the changes in your home with just a quick glance at the comfort level icon. Know when to dehumidify or humidify now!

Long Battery Life

Indoor temperature and humidity monitor is powered by one powerful and commonly found 3A battery that provides 18-24 months of battery life and when you do need to change the battery, it’s easily replaceable.

• ✓ MAINTAIN OVERALL HEALTH AND WELL-BEING OF REPTILES --- Habitats for these ectothermic animals must be kept within the Preferred optimum temperature range (POTR) to keep up with life in captivity. Heat is necessary for reptiles so that they’ll be able to reproduce, maintain a healthy immune system and have efficient blood circulation. Improper heating can make your herps susceptible to illnesses as it can negatively affect digestion, decrease appetite and may increase stress level.
• ✓ MULTIFUNCTIONAL WARMING TOOL --- Aside from providing an ideal terrarium temperature for your reptiles, this heat mat thermostat can be used for seed germination, aquarium, incubators, reptile enclosures, barbecue fermentation, and home beer brewing. Additionally, this device can be utilized to regulate the temperature of other appliances provided they don’t exceed maximum electrical specifications.
• ✓ PROVIDES CONTROLLED AND PRECISE LEVEL OF TEMPERATURE FOR TERRARIUMS --- As creatures that solely rely on outside sources to warm themselves, reptiles need to live in optimal temperature in their habitats. SunGrow Reptile Heat Controller can be used to maintain the required temperature in your herp’s environment. Its precise digital control feature makes it possible for users to closely control and monitor any kind of heat mat inside your bearded pet’s enclosure.
• ✓ EASY PLUG-IN OPERATION --- Easy to use with convenient plug and play design, it supports Celsius and Fahrenheit display with a temperature range of 5-40℃/ 42-108°F. It features LED illuminated indicator lights. Temperature can also be set by using the up and down button.
• ✓ UNIVERSALLY COMPATIBLE WITH ALL HEAT MATS --- With its three-prong grounded outlet, you can plug most heat mats, lamps or any warming device for your terrarium. Please note that heating equipment plugged into this thermostat should not exceed a total of 1000 watts.

User questions & answers

Question:	Does this item make a click sound when it turns the heating element on or off
Answer:	It does but it is not very loud. It does have a light that shows if it is heating or not.
Question:	Does this work with heat bulbs
Answer:	Yes
Question:	Does this have to be used with a heating mat or will it just tell me the temperature of the tank is it’s not connected to a mat
Answer:	It will read temp without a mat.. But for all that just buy a digital thermometer....and save a buck
Question:	Where do you put the prob for monitoring temp on heating matt
Answer:	Mine was on the center of the heat mat

Product features

A WORLD OF WARMTH

Reptiles are dependent on outside sources to warm or cool them. This is the reason why their habitats should have the proper temperature range. Failure to do so may result in serious illnesses or worse, even death. It is important to take note that before you even bring one home, it is necessary to set up the entire terrarium and heating system first. Ensure that your enclosure has a stable temperature for at least two weeks before placing your herp inside.

Reptile Heat Controller by SunGrow, when used with heat mats, can provide a controlled and precise level of warmth your pets require to thrive. They need to get a suitable temperature so that your bearded pets will be able to easily move its muscles to catch prey, escape form danger and properly digest food.

QUICK SET-UP & PROGRAMMING

With its Plug and Set installation process, you will be able to explore uncomplicated yet fully rewarding functional benefits of this thermostat. Below are simple steps to guide you during set-up:

MATERIAL & TECHNICAL SPECIFICATIONS:

• Material: ABS
• Color: Black
• Packaging: 1pc/Pack (Box)
• Size: 5.3” x 3” x 1.7”
• Wire length: 71“
• Power: 1000W
• UV: 120V
• Max Va：8.3A
• Temp：42-108°F (5-40℃)

Caution: Please keep away the probe or thermostat away from water.