14 best external aquarium pumps

• 🐠【Demension & Specifications】Powerful and ultra quiet water return pump. Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Pump Dimension (LxWxH): 6.2 x 3.1 x 5 inch. Cord length from the pump to controller is 6ft, the power cord length is 6.6ft. Wattage/flow/head: 25W/800GPH/9.8ft head. Please look the chart for each models
• 🐠【 Auto Shut Off When No Water】 Plug the power to turn this water pump on, unplug the power to turn it off. It is protected in case there's no water, the pump will auto shut off when no water is sensed or water gets too low. Comes with 2 kinds of removable water intake screens,1 for normal water level and the other for low water level (higher than 0.8inch)
• 🐠【Adjustable Flow Speed】This aquarium water pump has an external Led display controller, with 71 flow speed settings, you can control the flow rate from 30% to 100% of the top speed flow. 3 buttons on the controller: "Up" "Down" "Pause"
• 🐠【Internal & External Use】 Hygger dcp water pump can be ran externally or be submerged. Please note the controller is not waterproof, must be placed indoors. The pond pump comes with screws, o rings, pipe connection fittings. You can connect 1" or 3/4" pipes to this pond pump
• 🐠【Durable Water Pump】Wear-resistant ceramic shaft and magnetic drive makes this water pump a long service life. No copper element, can be used for fresh water or salt water. Need 10ft extension cord for the controller and pump, please go for ASIN B08CB69DSF

User questions & answers

Question:	Can I use a lower flow rate to reduce the power consumption so I get to use fewer watts than the pump is rated for
Answer:	Yes, the controller diplay lets you know how may watts or amps are being used for each setting.
Question:	With the width of this pump 1720 mode how far is it? will it fit in rs200 pump i have w
Answer:	Hi, the width of the 1720 mode is 4.1inch, the max head height is 14.8ft.
Question:	Which size should I get with a 150 gallon reef tank with 6’ head height for return pump
Answer:	for each elbow is 1ft head pressure. You want 10 times turn over unless you want to spend. a fortune on extra wave makers in the future. On average lets say a 50 gallon tank would have on average 3 elbows and 6-8 ft piping total so you would need a pump that does up to 1,000 gallons per hour because with head pressure, elbows and lets not forget the nozzle on the return all restricts. I have bought cheap pumps since I have been in the hobby and have saved thousands because I do not listen to hype and do my own research and speak from 34 years in the hobby. I have a gallery. 3 huge saltwater reef tanks and 24 freshwater. I gain nothing from giving you this advice other than sleeping well knowing you get the right GPH.
Question:	will this be too powerful for a 75 gallon saltwater tank
Answer:	I had it on a 60 gallon tall at about 33 percent and it was perfect. Cycling the tank around 7-8 times per hour. My Fish never seemed bother by it. To be honest though it does depend on what fish/corals you are keeping. Some like more flow then others.

Product features

2 kinds of water intake screens

Hygger water pump is different from others, because it comes with 2 kinds of removable water intake shells. It can be used in the lowest water level of 0.8 inch.

Aquarium Water Pump Other Features:

• Ultra quiet, runs at low vibration.
• Auto shut off when no water is sensed.
• High performance, energy saving up to 65% and safe operation.
• Can be used internally or externally, for salt-water or fresh water use.
• Durable for long time use, with anti-resistant ceramic shaft, magnetic drive.
• Easy to disassemble it by hand for cleaning, the impeller is removable.
• With 71 settings external controller, easy to control the flow rate from 30% to 100%.

External Controller

• Adjustable water flow rate: 30% to 100% of the top speed.
• There are 3 buttons on it, 'down', "up", "pause".
• When press the pause button, default stop time is 10 minutes, to cancel it please press the "pause" button again.
• To lock your setting, long press the "pause" button for 3 seconds, after the LED flickering for 3 times, it's successfully locked. To cancel it please do the same operation again.
• The controller has memory function for the flow rater, if the power goes out the controller will go back to the last setting.

Attachments for small water pump

The small dimension 800GPH and 1060GPH water pump comes with the following 8 attachments:

• 2 screw nuts: 1 pcs of 1-1/8", 1 pcs of 1-3/8".
• 2 O rings for sealing.
• 2 rigid pipe connections: 1 pcs of 3/4", 1 pcs of 1".
• 2 soft tube connections: 1 pcs of 3/4", 1 pcs of 1".

The connections are made of ABS, you can use PVC, PE, PP pipes for this water pump.

The small water pump is very compact, you can hold it by one hand.

Removable Impeller

• Hygger aquarium water pump is easy to be assembled and disassembled by hands, without using tools.
• You can look to the product image on the detail page to find the structural map.
• We use high performance and durable impeller, with ceramic shaft, magnetic drive, so this fish tank water pump has longer service life.
• The water pump will auto shut off when water level is too low, the impeller will stop working, want to restart the pump, please unplug the power and re-plug it.

Directions for use

1. You need to connect the power cord and the pump cord to this controller.
2. Turn on the pump by connecting to the power, turn off the pump by unplug the power.
3. The pump will stop working when input voltage is too high, upon no water, impeller blocked, to restart the pump please re-plug the power.
4. If you find the pump is failed to pump water at the beginning, please try to unplug and re-plug the power to get rid of the air inside the pump, repeat that for several times then the pump will work normally.

Use as internal submersible water pump

1. Max working water depth for this water pump is 5ft. Please check and clean the pump regularly.
2. Prohibit to use the pump in flammable liquids. Working water temps: 34-95 Fahrenheit degrees.
3. When use the pump internally, please keep the pump fully submersible in water before plug in power. Place the controller indoors.
4. Please use one of the 2 removable shells to prevent pump blocking.

Use as external/inline water pump

1. Don’t let the pump run dry, it will damage the motor.
2. When use the pump externally, make sure there are full of water in the pump body and the pipes before plug in power.
3. Please tighten all nuts and connections to make sure no water will leak out, or you can use extra glue to reinforce the connection.
4. Please note the controller must be placed indoors, it's not waterproof. Place the pump at lower position than the water level.

Product description

eFlux controllable DC flow pumps efficiently produce strong water flow with high pressure. Featuring a sealed DC motor and magnetic drive design, eFlux flow pumps can be used inline (external) or submersible in both marine and freshwater. • Quiet operation • Up to 65% in energy savings • Safe, low voltage 24V DC • LOOP compatible • Soft start gently ramps pump to speed • IC electronic detection protects pump if no water is present Adjustable Flow Unlike traditional AC water pumps, eFlux flow pumps are DC powered and completely controllable. Simply turn the dial to adjust the flow until the optimal flow rate is reached. This eliminates the need for flow restricting valves and ensures peak performance using less power. Incredibly Easy A cinch to install, eFlux Flow pumps have a very small footprint, allowing them to fit into even smaller sumps and tight spaces. High flow combined with high pressure makes them the perfect choice for return pump applications. Use It In or Out Safe for saltwater or freshwater systems, eFlux DC flow pumps can be installed submersible or external (inline). Quick couple hose barb fittings are included to make installation and servicing easy.

• ADJUSTABLE FLOW- Unlike traditional AC water pumps, eFlux flow pumps are DC powered and completely controllable. Simply turn the dial to adjust the flow until the optimal flow rate is reached.
• SUBMERISBLE or EXTERNAL- Safe for saltwater or freshwater systems, eFlux DC flow pumps can be installed submersible or external (inline). Quick couple hose barb fittings are included to make installation and servicing easy.
• INCREDIBLY EASY- A cinch to install, eFlux Flow pumps have a very small footprint, allowing them to fit into even smaller sumps and tight spaces. High flow combined with high pressure makes them the perfect choice for return pump applications.
• ENERGY SAVER- eFlux controllable DC flow pumps efficiently produce strong water flow with high pressure. Featuring a sealed DC motor and magnetic drive design. 65% Energy saving from traditional pumps. Pump Dimensions w/ Strainer- 7.5L x 3.25W x 4.2H inches
• 30 DAY GUARANTEE-We are so sure you’ll be happy with your purchase that we offer a “30-Day Money-Back Guarantee” to ensure customer satisfaction of our Current USA products. If for any reason you wish to discontinue using the products, we will promptly issue a refund.

User questions & answers

Question:	Maybe can I use this pump for milk or beer
Answer:	It’s designed for water , the wheel inside is plastic I don’t think it would last to long
Question:	How much pressure would i have if using the 3/4” outlet vs the 1” outlet? i have a head height of 13’ so i know i need the large pump
Answer:	Yes you do and even then it may not be enough at that head pressure. 1 inch would be better.
Question:	Will this pump just plug in to a outlet or do you have to wire it in
Answer:	No, it plugs into a controller which plugs into a power supply to the wall. The controller is the magic because that's where you adjust the speed of the pump.
Question:	Will this pump work for an aeroponics setup with constant pressure back up during the duration of misting? 1min 20-30 times a day
Answer:	Not sure as this is intended as an aquarium pump

Product features

eFlux DC Flow Pumps

eFlux controllable DC flow pumps efficiently produce strong water flow with high pressure. Featuring a sealed DC motor and magnetic drive design, eFlux flow pumps can be used inline (external) or submersible in both marine and freshwater.

Adjustable Flow

Unlike traditional AC water pumps, eFlux flow pumps are DC powered and completely controllable. Simply turn the dial to adjust the flow until the optimal flow rate is reached. This eliminates the need for flow restricting valves and ensures peak performance using less power.

Incredibly Easy

A cinch to install, eFlux Flow pumps have a very small footprint, allowing them to fit into even smaller sumps and tight spaces. High flow combined with high pressure makes them the perfect choice for return pump applications.

Use It In or Out

Safe for saltwater or freshwater systems, eFlux DC flow pumps can be installed submersible or external (inline). Quick couple hose barb fittings are included to make installation and servicing easy.

Orbit IC LED

Multiples Options from 18" to 72".

eFlux Wave Pumps

Ranging from 660 GPH to 2100 GPH.

eFlux DC Flow Pumps

Ranging from 1050 GPH to 3170 GPH.

The LOOP System Hubs and Controller

Light Hub,Wave Pump Hub, Flow Pump Hub, LOOP Controller.

• Good for up to 75 gallon fish tanks SunSun parts can be applied Flow rate: 264 GPH (1000L/hr) Pump Power: 18W Hose size: 3/4" Max-H: 4.6 feet
• 3 media trays capable of handling your choice of filtration media; Comes with an adjustable spray bar. This is a helpful feature if you want to adjust the output flow from the filter. No Light!!!
• Convenient self-priming pump that eliminates the need for manual siphoning; Single valve disconnect & priming pump ease routine maintenance
• Canister filters for aquariums use high water pressure, from a properly powered pump, to force water through the dense filter media. A pump can draw water from an under-gravel filter, and run it into a canister for double filtration
• The three flexible media trays allow you to add other filtration media such as SunSun's activated carbons, ceramic rings or bio-balls to achieve excellent mechanical, chemical, and biological filtration.

User questions & answers

Question:	Where do you find a replacement for the O-ring on the lid
Answer:	Yes, there is an instruction manual in the package. The RUN button and the +/- buttons are for skimming use. The WAVE and FEED button are useless.
Question:	What is the inside diameter of the hose
Answer:	150 will be fine. Thanks.
Question:	I only received one clamp, can I still run the unit until I get a replacemrnt
Answer:	I had too watch a lot of YouTube videos.. You want to have the bubbles come up to the bottom of the collection cup.. Ensure you control the output by rotating the blue handle. Also ensure that you you have the water level correct. I have mines set in 7 inches of water. Once I got all those parameters set, it has been working like it should. You will have to keep adjusting it until you get it.
Question:	For replacement media, does anyone know the model number of this filter? Want to ensure the availability of replacement foam for this filter. Thanks
Answer:	Full load operation would meet the needs if there is not much biology in the tank.

Product features

Free Media 265GPH External Aquarium Filter (No UV Light！)

• Input and Output Discreteness
• Barrel Head
• Main Canister Body
• Draining Tray Cover
• Draining Filtration Trays
• Output Curvy Bar
• Input Curvy Bar
• Connected Bars
• Spray Bars
• Spray Bar Cover
• Input Bars
• Input Cover
• Strong suction
• white-fine Cottons pads

(NO LIGHT!!)

O-Ring

O-Ring with vaseline, prevent leaking and slipping

Input and Output Discreteness

Separated components, 360°swivel joint, prevent water flow inside the bucket

Basket

With 3 baskets. Each basket has its own filter cotton which diameter is about 10CM.

Press Type Pumping

Be sure to drain the air out of the bucket before using.

Questions and Answers:

1. Missing pieces: We may miss some pieces when packing, please send us an email if any part is missing.
2. Leaking: Please make sure all pieces are assembled correct, adjust the o-seal ring on the top lid and put the filter lower than your tank, and make sure water can get through the green hoses soomthly.
3. Loud noise from the motor: You may need to check the impeller on the top lid if there is anything in it, and clean it. And then try it again.
4. Not pump water: Press the blue button on the top lid to compel the extra air out of the canister. And try it again.
5. The flow is slow: Add enough water into the tank, and adjust the cotton and medias.

• 【Amphibious Water Pump】This multifunctional water pump can be used in water and on land. When used in water, it can be submerged in fresh water and sea water. When used on land, you can connect two pipes for pumping and changing water.
• 【Professional Soft Start Design】When power on, the input voltage will gradually rise from zero to full voltage, reaching the set operating speed in about 5 seconds. This professional soft start method makes the water pump safer and less noisy during operation.
• 【Intelligent Control】There are professional intelligent chips inside the pump, which can automatically sense the working status, has functions of waterless protection, phase-lack protection and overvoltage protection.
• 【Longer Service Life】All-copper brushless rotor, wear-resistant ceramic shaft, power saving 65%, make this pump more durable, more energy-saving and longer service life.
• 【Specifications】Input Voltage: AC 100V~240V, Output Voltage: DC24V, Max Flow: 1320GPH(5000L/H), Max Lift Height:15.8FT(4.8M), Dimension: 8.5*4.1*5.1in, Inlet/Outlet: 0.75in 0.95in 1.18in

Product features

Description:

Submersible and external water pump, suitable for aquariums, fountains, ponds, hydroponics, etc.

Soft Start

When power on, the input voltage will gradually rise, reaching the set operating speed in about 5 seconds, more energy-saving and lower noise.

Intelligent Control

There are professional intelligent chips inside the pump, which can automatically sense the working status. It can make a safe environment for aquatic pets.

External Controller

The external controller can adjust the duty cycle of the rotor, then the speed and power can be changed. You can get the water flow you need by this safe adjustment.

• Mode key: You can choose pumping mode and wave making mode by pressing this key.

• Speed key: The speed key has functions of adding (“+”)and reduce( “-”) speeds. There are 12 speeds, from”101 to 112”in pumping mode, from “201 to 212”in wave making mode.

• Feed key: Press this key, the pump will stop working for 10 minutes, you can feed your aquatic pets. Press this key twice, the pump will come back to work during the feeding time.

Removable Impeller

This water pump has high quality impeller, durable and detachable, it can be easily installed and disassembled without any tools.

3-phases 6-poles All-copper Motor

Energy can be saved 65% when operated with this motor, more energy-saving and longer service life.

Ceramic Shaft

Wear-resistant ceramic shaft, more durable, more corrosion resistant, not easy to damage.

AQUARIUMS

FOUNTAINS

PONDS

HYDROPONICS

Product description

NEW JECOD (JEBAO) DCT series Pumps - DCT4000/DCT6000/DCT8000/DCT12000/DCT15000. Why are these better then the DT Models? DCT has a High performance motor with innovation electronics and energy saving up to 50% more then DCT. A New 10 Speed Controller. IC electronic detection, automatic power off protection upon no water sensor. Motor protection if rotor is blocked. Super quiet operation. No copper components. Wear resistant ceramic shaft, longer operation life.

• New enhanced range will replace the previous DC3000/DC6000/9000/12000/15000
• High performance motor with innovation electronics and energy saving up to 50% than previous models
• Power: 30-watt, Max flow: 1056GPH; Max-head: 9.8 ft
• Item Package Weight: 3.85

User questions & answers

Question:	Is the pump a mag drive pump
Answer:	Yes it is mag drive and it has a ceramic shaft I am loving this pump and I am a big fan of their powerheads too.
Question:	does this stop gravity from make water flow if you have a power outage
Answer:	Drill a small hole in your return pipe just below the (when running) water surface. When the pump stops, air will go into hole and stop siphon.
Question:	Will the DCT 4000 pump be enough for a 100 gallon fresh water with a 20 gallon sump, any info would be appreciated
Answer:	I run it about 3/4 flow on a 72 with a 20 gallon sump marine. Couldn't be happier with it.
Question:	can you use these outside a sump also? to pump the water out of a sump pump into the tank not being in water? I ran to these one time not very long th
Answer:	The manufacturer clearly says it needs to be submerged and the reason is pretty simple. The larger ones (12000 or 15000) dissipate use upwards of 100W of power. The surrounding water is used to keep the pump cool. Running the larger ones out of water will lead to a short and possibly smoky life.

Product features

Jebao DCT Marine Controllable Water Pump

Product description

Welcome to AQQA🐟🐟

AQQA is a professional shop specializing in aquarium supplies and accessories,all products from this store the actual filming of goods please rest assured that you purchasers to buy!

We are determined to provide better product and better services to our customers.Our customer service is online 24 hours, providing pre-sale, sale, after-sale service, the product implements a free return policy, Free replacement within 3 months. If you have any questions, please feel free to contact us.

AQQA--Aquarium accessories,Quality Assurance



Product Description

🐟Product Name:AQQA Multifunction Intelligent Variable Frequency Water Pump

🐟Size:30W

🐟Flowrate:800GPH ( 3000L/H)

🐟Mode:constant speeds and wave maker

🐟Controller:LED + touch-control(External)

🐟Line length:7m

🐟Output voltage:110V/60Hz

🐟High Lift:9.8ft

🐟Package included:1× User manual 1× AC water pump 1× Controller 1× Bottom suction cover 1× Filter cover 2× O-ring

Outlet or inlet fittings as following:



Funcation Description

1.Used as submersible pumps

2.Used as non-submersible pumps，circulation water pump



Precautions for Use

1.For indoor use, the power socket must be installed with the leakage current protecting device, and the leakage current shall not exceed 30 mA

2.A clogged or dirty intake screen will reduce the performance.

3.Do not let the pump run dry- this could cause damage to the motor.

4.Read and follow user manual strictly befor use.

5.Close supervision is necessary when the pump is used near children.

6.All of our pumps are professionally tested by the manufacturer before shipment, if the water pump you received with a little water, please don't worry, the little water was left from professional water testing, it is a normal phenomenon. It is new and normal pump.



WARRANTY

1-year free warranty.

• ⛲【Multifunction Energy Saving Ultra-quiet AC Water Pump】①Used SINE Wave technology,makes the pump run smooth②Silicone shockproof base,working quiet③AC motor with magnetic drive and ceramic shaft design saves more energy, is safer, and ensures a long pump life.④Large flow guarantee,super powerful,high lift⑤Output voltage:110V/60Hz⑥multiple flow rate choices：800GPH 1200GPH 1600GPH 2400GPH 3200GPH
• ⛲【Constant Speeds and Wave Maker Two Modes,Submersible or External Dual-use】“1-20” is shown on LED display.The “1” means the pump is set to constant flow mode,Press the “Set”button to show“2-20”,this is the wave make model,Two model both are 20 option adjustable speed flow settings.Comes with 2 kinds of removable water intake screens,one for normal water level 360°intake and the other for low water level,can be used to clean fish tanks.
• ⛲【LED External Controller with Feed Model】Simple and easy to operate LED controller,HD display,can be attached to glass or ceramic tiles( Not waterproof, can't be put into water),Press the“Feed”button to adjust feeding time from 10 minutes to 30 minutes. In feed mode, the pump will stop working,After the set eating time is over, the pump will automatically restart to work.
• ⛲【Internal & External Use Return Pump, Equipped with Multi-size Nozzles】this water pump can be ran externally or be submerged.Cord length from the pump to controller is 16ft, the power cord length is 6.6ft. with full set of accessories like o rings, various sizes pipe connection fittings.Simple disassembly no need any tools to detach it and very easy to clean.
• ⛲【Automatic Shut Off Protection,Suitable Saltwater & Freshwater Systems】When the pump detects no water, default phase or over voltage, it will power off automatically. The motor will also power off if the rotor becomes blocked,Once the pump detects no water five times, it will shut off automatically and display E-01.suitable for saltwater,freshwater,fountains,ponds,sump,hydroponics,One year warranty.FREE return and exchange, please rest assured to buy.

User questions & answers

Question:	Are there extention cables availabe to lenthen chord?s
Answer:	Hello,The wire from the plug to the controller is 6ft, and the wire from the controller to the pump is 16ft. If the wire is not long enough, you can only use a power strip.
Question:	Is the product quality good? Will it leak? I once bought a pump of other brand and it broke after 2 months, damn it
Answer:	Good product
Question:	what size of hose tubing for this pump please
Answer:	Hello,30W/40W/55W can use 20mm/25mm/31mm hose tubing,75w/85w can use 20mm/25mm/31mm/40mm hose tubing.
Question:	Hello,Is this pump dc or ac
Answer:	Hello,this is AC water pump,AC water than DC water pump more powerful and safe

• 🐳【Submersible/Inline Pump 2in 1】Suitable for AMPHIBIOUS use. It can be submerged in water as a submersible pump or connected to a pipe for use as an inline pump. Perfect for water change, water circuration, hydroponic system, fountains, fish tanks, aquariums, etc. (Note: Make sure to POUR WATER into the pump before EXTERNAL USE)
• 🐳【Specifications】Dimensions: 4.9x3.2x3.9inch. The 6.5ft long power cord offers convenient installation. Max Flow Rate: 550 GPH (2100L/H), Max Lift height: up to 6.5Feet. Watt: 35W; Voltage:110-120V
• 🐳【6 Optional Nozzles】It comes with 6 optional nozzles to suit for different tubing, size: 3/4inch(19mm)×2, 6/7inch(22mm)×2, 1inch(25mm)×2. 6 nozzles providing you different water flow effects
• 🐳【Detachable & Cleanable】This profile size water pump is easy to hide or disguise. No need any tools to detach it, easy to seperate, easy to clean. 4 rubber suckers on the bottom, can adsorb on the glass surface and reduce noise and vibration
• 🐳【Warranty】: The relible and duarable motor does not produce much noise, giving you quiet environment. Super durable & reusable; Any question of your KEDSUM 550GPH submersible water pump, please come back to us and we will be responsible for the pumps we produce.

User questions & answers

Question:	Does the 550gph model come with a fitting or not
Answer:	Mine came with 6 fittings that screws into the top. Hope this helps.
Question:	someone pulled the pump out of the water and it no longer work. Can it be reset or did it burn out
Answer:	not designed to work Dry out of water the water lubes the internals and keeps it running cool,if after unplugging it for about 20mins leave it submerged dosent run its toast.
Question:	I have a 65 gallon rain barrel. Is this pump strong enough and equiped for a nozzled 3/4" 50 ' garden hose? Any modifications on my part necessary
Answer:	It suggests for 135 Gal pump. And has three outlet adapter:1.18,0.66,0.55 inch.
Question:	Is this for 110v
Answer:	Yeah looks like mine and it's for 120 volts.

Product features

Fountain

Hydroponics

Pond

KEDSUM Submersible Water Pump, External Inline Water Pump, Fountain Pump-35W, 110V

-Material: ABS shell

-Max Flow Rate: 550GPH (2100L/H)

-H-Max (Lift height): up to 6.5 feet(2m)

-Outlet Adapter OD: 3/4inch×2(19mm×2), 6/7inch×2(22mm×2), 1inch×2(25mm×2)

-Length of power cord: 6.5ft(2m)

-Size: 4.9x3.2x3.9inch

• Reliable Pump: NO PCB in pump makes it more stable and long-lived than DCT series. High performance of 3 phases 6 poles motor and Wear-resistant Ceramic Shaft.
• Smart Controller: 99 Adjustable Speed & 10 min pause feed mode; memory function can keep the same setting after every restart.
• Multiple-Safe Protection: IC chip control, LACK OF WATER protection, STUCK protection and True Soft Startup
• Submersible&external: Suitable for amphibious use, can operate in Marine and Fresh Water. Make sure to POUR WATER into the pump before EXTERNAL USE.
• Safe low voltage: DC 24 V, Power: 35 W, Max flow: 1052 GPH, Max-head: 11.5 ft.

User questions & answers

Question:	Do any of the components that make contact with the water have copper? I know the motor itself has copper coils
Answer:	No. The unit is completely sealed.
Question:	how long is the power cord? there is no mention of this anywhere
Answer:	6’ ish
Question:	My setup requires 45 feet of cable from controller to pump. Is there a problem if I cut and splice added length
Answer:	U should be ok. It’s DC. Look up the gauge recommended for that length. My guess is 14 gauge.
Question:	Can this be turned down to pop only 700 gallons per hour for my reef tank
Answer:	Yes, the pump can be turned down to 700 gph

Product features

When Should You Have A DC Water Pump?

If you're a user who want a good pump for long-term use and attach importance to electricity safety, you should know about DC water Pump.

Except for its multi-function, DC water pump was designed with low voltage direct-current electricity which means it can provide users a safe using environment no matter for indoor or outdoor uses.

DC water pump is more efficient and energy saving, if you use the pump regularly around 4 hours a day, it can save you about one or two pumps a year, its workmanship of pure coil copper coils and more advanced motor technology determined its long lifespan.

1052 GPH Controllable DC Water Pump

Uniclife controllable DC water pump was introduced three phases six poles motor and wear-resistant ceramic shaft which is powerful and durable. It is multifunctional, applicable for wide range of applications such as fish tank, indoor fountain and hydroponic system and many types of devices.

Ninty-Nine Adjustable Flow Rate

• Every time press “-” or “+” to adjust the flow rate. Display range: 1~100.
• Flexible to operate with memory function to keep the same setting after every restart.

Wear-resistant Ceramic Shaft

• Makes the pump more durable and its service life was extended than usual ones.

Three Phases Six Poles Motor

• With this motor, energy can be saved up to 65%. And it is running super quiet.

How to determine if it’s a right water pump for your aquarium tank?

The First Step: you need to decide the suggested flow multiples of your tank.Mainly we divide tanks to three types: FOT, LPS an SPS.Suggested Flow Rate Multiples:

• FOT(Fish Only Tank): 8~10 times of the tank's water volume.
• LPS(Large Polyp Stony Corals):2~3 times of the tank's water volume.
• SPS (Small Polyp Stony Corals):3~5 times of the tank's water volume.

The Second Step：know the actual required flow for your tank which is different for different types of tanks and calculate the applicable pump flow rate.

Here's the formula for you to calculate:

• Actual required flow（approx.)=water volume in tank(gallon)* (1+20%)*suggested multiple of different tanks
• Applicable pump flow rate（approx.)=Actual required flow+530gallon

For example:

Applicable pump flow rate：100gallon*(1*20%)*8=160 GPH; 160GPH+530gallon=690GPH

Above information is only for reference, if you're an experienced hobbyist, you could choose the pump depend on your own ideas.

• 🐳 12v dc small submersible centrifugal water pump, NOT self-priming, design to be submerged. (Submersible installation and entirely waterproof)
• 🐳 Max Head: 16.4ft. max flow rate: 500L/H 132G/H, waterproof level: IP68, 12W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (make sure the joint sealed securely and tightly)
• 🐳 NPT 60° Threaded: threaded fittings make it more stable. The impeller shaft is stainless steel for long life span and corrosion resistance.
• 🐳 Feature: High efficiency, energy saving, ultra-quiet design, high lift & heavy traffic, durable & good insulation.
• 🐳 Multifunction: Perfect for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond, can be applied in aquarium, fountains, spout, hydroponic and pond. (Warranty and Service: Every sale includes an 12-month, worry-free guarantee to prove the importance we set on quality. If you have any questions, don't hesitate to contact us! )

User questions & answers

Question:	Pump spins the wrong way ive tried reversing the leads at which point the pump then just does nothing.. I'm using a 9v battery for power supply
Answer:	Thinking you need a 12v battery to operate the pump properly
Question:	Can these pumps run dry since their brushless
Answer:	A brushless water pump means that the motor of the water pump is brushless. Brushless DC motors use semiconductor switching devices to achieve electronic commutation, which replaces traditional contact commutators and brushes with electronic switching devices. It has high reliability, no commutation spark, low mechanical noise, etc.
Question:	Is this pump self priming if installed about a foot above water level
Answer:	No, this pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
Question:	will this pump work with a solar panel connection? or is it a 110v plug
Answer:	This kind of Brushless magnetic drive centrifugal water pump could be working with solar panel connection, but we don't provide it. It is made by USA standard, and could be using in aquarium, fountains, spout, hydroponic ... And it is designed by DC volt motor and working below DC12V/1.0A.

Product features

Small Size High Efficiency

Size: 3.14*2.5*1.88 inches / 80*64.4*48 mm

Power Cord Length: 35 inches

Threaded inlet and outlet

Threaded inlet and outlet,NPT 60°

Inlet: 0.52 inches(1/2'') / 13.3 mm

Outlet:0.52 inches(1/2'') / 13.3 mm

Wear-resistant High-density Bearing

This submersible pump can work continuously for 20,000 hours, and the service life is 7-10 years

4-0.45 mm Pure Copper

This dc water pump's motor with high temperature resistant 180°C / 350F copper wire, diameter 0.4-0.45 mm, low resistance and high efficiency

OCCASION: DIY fountain, dishwasher, aquarium, outdoor spa, etc.

• Model: DC40E-1250
• Power consumption: 13.2W
• Rated voltage: 12V
• Rated current: 1.1A
• Max flow rate: 130GPH / 510LPH
• Max static head: 5m (16ft)

Note:

• When blocking, long-running is not allowed.
• Preventing any hard particles entering the pumps.
• Working at rated voltage (DC12V/1.0A ). The positive pole is red wire, the negative pole is black wire/blue wire. Excessive voltage and current will affect the life of the pump
• This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
• How to Choose pump:
• Working environment (temperature and medium)
• Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet)
• Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump

Product description

Important Tips:



Please add a filter to avod hair or dirts being clogged with in this pumps.

if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!



Specifications:



Material: PA66+Glass fiber

Power consumption: 4.2W

Rated voltage: 12V

Rated current: 0.35A

Max flow rate: 240L/H (63G/H)

Max static head: 3m (9.8ft)

Diameter of inlet: 8mm(0.31 inch thread)

Diameter of outlet: 8mm(0.31 inch thread)

Noise: Waterproof level: IP68

Lifespan: More than 30,000hrs

Power supply: DC electric source (bared wire)

Driving method: Brushless, Magnetic

Max working temperature: 60℃/140°F

Item dimension: 51mm*34mm*42.7mm



Note:



1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.

5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;

• 12v dc Submersible brushless Water pump,NOT Self-priming ,design to be submerged,can be powered by 12v Ac power adapter, please Search ASIN (B0713T89R1) for the power adapter.
• For the Water fall,Water feature & Water foutain in Home & Garden - Would make a nice fountain pump for a display,Can be powered by solar pannel( need to add a constant-voltage controller yourself) , or power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
• For Your Bucket Swamp Cooler - This little Pump Would work like a dream for DIY Bucket Swamp Cooler ,power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
• For PC & laptop Cpu Water Cooling system - If you are looking into diy a quiet water cooling Set for your Cpu,you should never miss this pump to cool down your Cpu at average Temperature for best Performance
• For other Water circulation applications: used this to pump water for pets, evaporative cooler, to circulate R V. antifreeze, for hydroponic systems and many other applications

User questions & answers

Question:	Can this work in a pressurized closed loop? I want to circulate water from a storage tank-solar water panels-back to tank, all at city water pressure
Answer:	Not at city water pressure for sure. Closed loop maybe, but not under any pressure. It's just and inexpensive little plump.
Question:	how long can it be out side before it burns up
Answer:	I used it in my swamp cooler while camping in the desert for 7 days and it still went strong. I was placing melted ice from the bottom of the cooler into the swamp cooler so it helped keep it cool. It still works.
Question:	Can it be powered by 10V or less
Answer:	Yes just didn't run as fast
Question:	Does it have to be submerged? I want to run the intake tube into a tank, keep the pump outside, and then the exit tube to a drain
Answer:	It depends on how long you plan to run it. I do not submerge mine since I am moving beverage from one container to another. It runs less than 15 minutes at a time.

• Can be used either submersible or in-line in Freshwater or Marine water. Indoor & Outdoor use, Ideal for ponds, pools, Waterfalls fountains and large aquariums.
• Premium ceramic shafts and bearings support working over 25,000 hours.
• 10' UL listed SJTW power cord,18# gauge copper, resists oil/grease, able to work under 248℉. 3-Prong grounded plug.
• Easy carry handle. Detachable pump head & suction cup base, easy to clean without using any tools, 4 detachable Strong suction cups hold the pump steadily and keep it quiet.
• Flow Rate of 1000 Gallons per Hour (GPH) @ 0' ft; 800 GPH @ 5' Lift; Max Lift: 10', 80 WATTS, 120V AC, Pumps Dims: 7.5" X 3.7" X 4.7". Come with 2 Outlets Nozzles (3/4", 1" OD) and 1-1/2" OD Inlets Nozzles.

User questions & answers

Question:	Can this be used to feed a power washer from an external source
Answer:	No. This pump is small and intended for aquariums or water features.
Question:	I purchased the dp 2500, however the pump rate is no where near advertised amount, is the 1000gph any closer to advertised
Answer:	I tried using inline to assist water changes, did not work , submerged I need to pump up 3 feet this pump couldn’t handle it
Question:	I recently purchased this for my in greenhouse tank pond. The magnets are seizing up and we have to manually reset. This has happened 3 times why
Answer:	the only time mine has stopped is when it is near the end of its life. some have lasted years. this is a plastic pump.
Question:	What is the threading of the inlet and outlet
Answer:	i would think that there is a difference between a 400 gph pump and a 1000 gph pump but mine is 1/2 npt

Product features

What You Get

Performance & Sound Improvement

High-precision ceramic motors and bearings of maximum efficiency, durability and Quiet operation.

Product description

Jebao 2017 new DCP pumps give you enhanced performance and precise control of flow through your aquarium's reactors, sump, or closed loop system. With complete control through the DCP Controller, you can control the flow of the pump, enter feed modes (10 minutes), Motor Protection if rotor is blocked. Super quiet operation. No copper components. Wear resistant ceramic shaft, longer operation life. Package includes: DCT-5000 return pump, power adapter, controller, 3/4" to 1-1/4 inch in-line fitting.

• 2017 latest DCP return pump from Jebao, improved from the DCT model
• High performance motor with innovation electronics, and energy saving up to 50% than old model
• No Copper components , safety on your tank! Internal Use Only!
• Super Quiet Operation and Memory Function for Power Supply Off to recall memory
• Power: 40-watt 110-120V 60Hz, Max Flow: 1450gph, Max head: 13ft, Dimension: 7x4x5 inch

User questions & answers

Question:	Is this pump dc or ac
Answer:	It’s a DC pump.
Question:	What size are the threads on the
Answer:	Hi Dear. The size of the connecter is 21mm, 26mm, 32mm, 34mm, 39mm, 41mm, 48mm.
Question:	Are these are submersible like the older versions
Answer:	Yes they are.
Question:	Apex ready
Answer:	Not Apex ready, however I have it plugged into my EB8 and have all the controllability I need for return pump. Excellent pump on 65 gallon cube reef. Extremely quiet and runs at 25 watts.

Product features

Jebao DCP Sine Wave Water Return Pump

• SINE wave technology, ultra quiet operation.
• High performance with innovative electronic motor, and energy saving.
• IC electronic detection, automatic power-off protection upon no water.
• Motor protection if rotor is blocked.

• Submersible / External: The adapter and controller are not waterproof and should be used indoors or under a protective cover when used outdoors. Comes with screws, O rings and 1 multistage Outlet fitting（1/2", 3/4" & 1" OD）and 2 Inlet fittings (3/4" & 1" OD)
• Adjustable Flow Rate: Features an external controller, you can control the flow rate from 30% to 100% of the top speed flow. 4 buttons on the controller: Up, Down, Feed and On/Off.
• Feed Feature: Long press the button for about 3S, FEED indicator light is on, and turns off pump for 10 min and restarts automatically. The pump will shut off automatically when there is no water or water level gets too low.
• Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Power: 35 W. Max Flow Rate: 1060 GPH. Max Lift: 11.4 ft. Cord length from the pump to controller: 6 ft. Power cord length: 3.6 ft. Dimensions: 7 x 3.3 x 4.8 inch.
• Sine Wave: Ultra quiet due to sine wave technology. Wear resistant ceramic shaft and magnetic drive ensure this water pump a stable performance and long service life. No copper element so that it can be used in fresh water and salt water.

• DC Powered Controllable Water Pump — DC motor with magnetic drive and ceramic shaft design, extremely powerful, energy saving yet very quiet, this dc pump only uses 24 volts power saving 65% energy over traditional pump, safe & low consumption
• Easy to Read External Controller — Build in external controller, easy to operate, offers up to 71 speed setting for you to customize water flow and feeding setting ( turn the pump off for 10 minutes for feeding). Easy to read red Led display
• Inline or Submersible — This Versatile Water Pump can be used either submersible or in-line in Freshwater or Saltwater. Ideal for sump tank, freshwater and saltwater aquariums, ponds, waterfalls, fountains and water features
• Auto Shut Off — Water Pump will automatically power off for 2 minutes when detects no water or over voltage. Enables memory function. Comes with two types intake screens, it will handle debris up to 2/3 inch, preventing clogging and reducing maintenance.
• Flow Rate 800 GPH ; Max Lift: 9.8', 25 Watts, output voltage 24V DC, input voltage 100-240V. Comes with 2 pcs screws (1-1/8", 1-3/8"), 2 pcs o rings and 4 pcs pipe connection fittings (3/4", 1" OD). (PS: hose is not included)

User questions & answers

Question:	What is the max gph at 5ft lift for the 2650 at its highest setting? also what is the lowest gph at its lowest setting at 5ft lift
Answer:	I test it on %100 operation with 5/8 adaptor it shoots water 10’
Question:	Is there an Extended warrantee available
Answer:	One year warranty. Thanks.
Question:	Are there suction cups included? If not, does the pump vibrate on the bottom at all? Thanks
Answer:	No suction cups. The pump sits on a slice of flat elevator. It will not vibrate. Thanks.
Question:	Where can i buy replacement parts for this? the fitting i have for the pump has began to disintegrate and is leaking water. i need to replace it
Answer:	Fitting ASIN B08G88P7QF

Product features

DC Water Pump Inline/Submersible

• Ideal for sump tank, freshwater and saltwater aquariums, ponds, waterfalls, fountains and water features
• DC motor with magnetic drive and ceramic shaft design, extremely powerful, energy saving yet very quiet
• Build in external controller, easy to operate, offers up to 71 speed setting for you to customize water flow and feeding setting
• Auto shut off for 10 minutes when detects no water or over voltage

Freshwater Aquarium

Saltwater Aquarium

Waterfall

Sump Tank

External Controller

Build in external controller, red led display is easy to read and controllable. "Fxxx" represents working mode, can be adjust from 30-100. "Pxxx" represents real time output power. "Feed" represents turn off the pump for 10 minutes for feeding.

Ceramic Motor

Made of durable, corrosion resistant ceramic motor, this water pump can be used in saltwater aquariums. Powerful, yet very energy saving using only 24v power saving 65% energy over traditional pump, safe & low consumption

Accessories

• 1 x pump body
• 2 x 1-3/4" O Rings
• 2 x (1-1/8", 1-3/8'') Screws
• 2 x Rigid Pipe Connectors ( 3/4" & 1")
• 2 x Soft Pipe Connectors (3/4"& 1'')

Intake Covers

Two types intake covers, black filter cover can handle debris up to 2/3 inch, preventing clogging and reducing maintenance. Gray intake cover used for low water level