8 best pac amplifier cars

A PAC (Pacific Accessory Corporation) amplifier is an aftermarket electronic component designed for use in car audio systems.These amplifiers are commonly used to enhance the sound quality and power output of a car's audio system. Here's what you should know about PAC amplifiers in the context of car audio and related accessories:

  1. Amplification: PAC amplifiers are designed to amplify the audio signals from a car's head unit or source unit. They take the low-level audio signals (often referred to as preamp signals) and boost them to a level that can drive speakers or subwoofers, resulting in a louder and more powerful sound.

  2. Compatibility: PAC amplifiers are typically compatible with a wide range of car audio systems and head units. They are often used as part of aftermarket audio upgrades to achieve better sound quality and increased volume.

  3. Wiring Harnesses: When installing a PAC amplifier in a vehicle, a compatible wiring harness may be required. These harnesses help connect the amplifier to the car's electrical system and audio source. Some PAC amplifiers come with specific wiring harnesses for easier installation.

  4. Vehicle Electronics Accessories: PAC offers a variety of vehicle electronics accessories and interfaces designed to enhance and simplify the installation of aftermarket audio and electronics components. These accessories may include integration modules, steering wheel control interfaces, and more.

  5. Audio Video Installation: Installing a PAC amplifier often involves connecting it to speakers, subwoofers, and the vehicle's electrical system. Proper installation is crucial to ensure optimal performance and to prevent issues such as noise or electrical interference.

  6. Sound Quality: PAC amplifiers are chosen not only for their power output but also for their ability to improve the overall sound quality of a car audio system. High-quality amplifiers can provide cleaner and more accurate audio reproduction.

  7. Customization: Car enthusiasts often use PAC amplifiers as part of custom car audio installations. These installations can include multiple amplifiers, specialized speaker setups, and subwoofers to create a personalized audio experience.

  8. Safety and Installation: It's important to ensure that the installation of a PAC amplifier is done safely and in accordance with the manufacturer's instructions. Improper installation can lead to electrical issues or even damage to the vehicle's electrical system.

  9. Professional Installation: While some experienced car audio enthusiasts may choose to install PAC amplifiers themselves, many opt for professional installation to ensure that the system works correctly and safely.

In summary, PAC amplifiers are aftermarket audio components used in car audio systems to boost the power and quality of audio signals. They are compatible with various car audio setups and often require proper wiring harnesses and installation to work effectively. These amplifiers can be a key part of custom car audio installations, providing improved sound quality and volume in vehicles.

Below you can find our editor's choice of the best pac amplifier cars on the market
  

PAC LC-1 Remote Amplifier Level Controller,Black,Small

PAC

Based on 2 reviews Check latest price

Product description

The PAC-LC-1 remote amplifier level control, used to adjust an amplifier's power level, stereo, equalizer or crossover volume form the dashboard or other remote locations. It adds sub-woofer level controls or balances a multiple amplifier installation. Fine tunes the volume of any RCA line level signal you wish to control. Compact housing allows the unit to be mounted virtually anywhere so control is at the user’s fingertips. Simple in and out connections, no additional wiring needed. Great for a sub amp volume control.

  • Remote amplifier level controller
  • Enables volume balance in any part of an amplified system
  • Adds subwoofer level controls to any head unit
  • Stereo RCA input and output

User questions & answers

Question: Does the label on the front of the unit (pac, level, etc.) come off easily, or is it painted on? looking to intstall this in a "clean" project
Answer: Yes
Question: The description says that it is a remote level controller. Does it work with an infrared remote control? If not, do you know of one that does
Answer: Did this work on ur 2016 cruze. I have same year (new body). Crutchfield (big home and car audio dealer), does not have this available for this year as of yet (6-2-17). Want to change stereo but i trust crutchfield to have these things first. Still curious if u tried it or not.
Question: are rca jacks both a line in and line out
Answer: I am not 100% sure, but it does work on my 2011 lacrosse, same connectors.
Question: Does the knob come off so that the unit can be flush mounted behind a panel
Answer: Not sure about the mylink system. My son purchased this and had the local shop install it in his 2012 Sonic LT with the 6-speaker system. His biggest concern was retaining the steering wheel controls and Bluetooth microphone which seem to be the most common trade-offs. Worked perfectly to add an amp/sub without loosing any factory operations. I would suggest getting with your local install shop and talking with the experts but I will say this. I drive a Mazdaspeed3 with the factory touch/NAV and bose 9-speaker system. PAC said the similar adapter would not work on my car but I installed it 10 days ago and it works perfectly. I believe it is because it plugs in line between the head unit and the factory amplifier/Bluetooth/Sirius/etc... controllers. For the cost/benefit I would go for it.

PAC AOEM-FRD24 Add-On Amplifier Interface with 24-Pin Connector for 2005-Up Ford Vehicles

PAC

Based on 273 reviews Check latest price

Product description

This adapter is a plug and play add-an-amplifier kit for factory Ford/Lincoln/Mercury stereo systems. Easy and simple installation without having to cut up or splice the factory stereo wiring. Use this adapter to add an aftermarket amplifier to your existing stereo system. 4 channel adapter that is linear from 20 to 20k hz. Adjustable, independant gain controls for each channel. An amplifier turn on wire is provided.

  • Interface that Allows the Replacement or Addition of an Amplifier in Select Ford Vehicles without Factory Amplified THX Sound System
  • Interface is transformer isolated
  • Provides 2:1 gain and infinite attenuation
  • Linear from 20-20,000 Hz.Not compatible in vehicles equipped with the THX or Sony amplified systems
  • Input connectors plug into factory stereo and vehicle harness
  • Interface that allows the replacement or addition of an amplifier in select ford vehicles without factory amplified thx sound system
  • Interface is transformer isolated

User questions & answers

Question: What the difference between pac ap4-fd11 amppro and this one
Answer: Its painted on but its raised lettering and seems like it wouldn't be hard to remove. My remote is hid, so it's a nonissue for me, but I understand wanting it clean!!
Question: Will this work for a 2017 Ford Fusion Hybrid
Answer: IR controlled volume boxes are available, look up the MCM CUSTOM AUDIO 50-8394.
Question: my truck have original subwoffer,but i wanna change. My question is this kit should be install in the back or i need to put in the radio
Answer: Yes, there are two sets of RCA jacks. One set for "In", and one set for "Out". They are all female.
Question: focus st
Answer: Yup, in fact, that's what I did. I busted open the plastic housing and pulled out the circuitry, then drilled out a hole in the glovebox and mounted the knob. That way, I opened the glovebox and adjusted the levels if needed.

PAC ROEMINS-2 System Interface Kit to Replace Factory Radio and Integrate Factory Amplifiers for 1995-2002 Nissan Vehicles with Bose Audio Systems,Black

PAC

Based on 308 reviews Check latest price

Product description

System interface to replace factory installed receivers and integrate factory amplifiers

  • System interface to replace factory installed receivers and integrate factory amplifiers
  • Adjustable 4-channel RCA outputs
  • Isolated transformer inputs and outputs
  • For 1995 - 2002 Nissan vehicles with Bose audio system
  • Easy Installation
  • System interface to replace factory installed receivers and integrate factory amplifiers
  • Adjustable 4-channel RCA outputs that provide Line Level Matching

User questions & answers

Question: z. Is this only to make the bise amp work with an aftermarket stereo, or does this also help the steering wheel controls
Answer: I had the same problem with the 59X79 one. Try watching this: https://www.youtube.com/watch?v=hDDM8UyvE6k
Question: Does it fit with my Nissan Altima
Answer: 43 Cm / 16 inches. I have the round one and this oval one, the difference when it collapses is practically none. About the suitcase... Well... it's 16 inches, I think it will, but depends on your suitcase.
Question: Will fit my 04 pathfinder armada with Bose
Answer: 43” easier to handle and good for head and shoulder shots. 47 x 71 better for full body shots but a bit harder to handle and fold back up. Personally I’d get one of each, the right tool for the job.
Question: I have a 2005 350z bose sound system. is this the only harness i need to instal an after market deck? there's 4 connectors in the car but this has
Answer: That sounds about right but the are constantly falling off. I advise against these if you have metal pedals. They come with nuts to help hold them on that keep loosening up allowing them to drop off. I am back to having to reflectors on my bike because they dropped off somewhere along the road.
Question: Will this for my 2008 Isuzu 1-290 Sony double din
Answer: Set of four.
Question: Will this work for a 2011 silverado radio
Answer: you get four reflectors (two for each pedal) and the hardware to attach them .
Question: Will this fit my 2007 LT tahoe with bose system
Answer: My pedals have toe clips and I used the screws that came with the reflectors so they should work for you too.
Question: Does it work for 2006 cadillac dts
Answer: 3/8" thick 1/2" wide 2" long
Question: Will this work with 2015 Silverado hd
Answer: The bolt spacing is, center to center, about 2 cm to 3.5 cm (3/4" to 1-3/8"). I fit them on my Shimano PD-M324 SPD Dual Platform Pedals.
Question: Does it work on chwvy tahoe
Answer: Do you mean a Peloton indoor trainer ? Then I would say yes....if the trainer cranks take a 9/16 standard thread ???
Question: This work for 2004 chevy avalanche
Answer: check what color the pedal come in ??? Big range
Question: Will this work for chevy tahoe 2011? Bose sound
Answer: Therse are installed using an allen key. You insert the pedal into the crank arm, then take your allen key insert through the crank arm into the pedal and tighten.

PAC SNI-1 Noise Isolator, 1 Count

PAC

Based on 1 reviews Check latest price

Product description

PAC SNI-1 Noise Isolator. Eliminates ground loop noise between the audio source and radio. For use with portable devices that have RCA audio outputs, including pre-amp outputs. Close to perfect response of +/- .03 db from 2 to 20,000Hz. Utilizes proprietary audio transformers for a 1.3 dB gain.

  • Eliminates ground loop noise between the audio source and radio. For use with portable devices that have RCA audio outputs, including pre-amp outputs
  • Close to perfect response of +/- .03 db from 2 to 20,000Hz
  • Utilizes proprietary audio transformers for a 1.3 dB gain
  • Manuel

User questions & answers

Question: can i use this between a powered subwoofer and AV receiver for home theater
Answer: Yes, connect AV receiver RCA sub output(s) into the Noise isolator and plug connect its other end into your subwoofers RCA input. If you only have one sub output from your AV receiver, then you could also use a standard in-line noise isolator.
Question: Will it remove the white noise I have in my speakers
Answer: Perhaps, this solation devices clears up most noise induced from a variety of sources and then isolates it's transmission into the next device connected. Thus ground loop and most white noise is eliminated.
Question: will it stop the engine noise in my speakers
Answer: I have a 2011 Camaro and this Noise Isolator did NOT stop the engine noise.
Question: Can u install on the amp
Answer: Yes. You can install it before the RCA input on the amp.

PAC Premium Amplifier Add-On/Replacement Radio Sound System Interface Kit GM - PAC AOEMGM1416

PAC

Based on 230 reviews Check latest price

Product description

PAC Premium Amplifier Add-On/replacement Radio Sound System Interface Kit GM - PAC AOEMGM1416.

  • The factory amp (if equiped) & system will remain unchanged.
  • Interface is transformer isolated, maintains phase and is linear from 20 to 20,000 HZ.
  • This 4 channel interface will allow the output to be adjusted to the input requirements of the new amplifier, providing 2:1 gain and infinite attenuation.
  • The input connectors plug into the factory stereo and vehicle harness.
  • The 4 female RCA output jacks plug for connecting to the new amplifier.

User questions & answers

Question: Will this work on a 2005 Chevy Tahoe
Answer: It is one disc with covers that are reversible, each with two different colors. It is really very handy, very easy to use, and has been holding up well to the abuse of being tossed around in the back of my car.
Question: Would this work for a 2019 Chevy equinox
Answer: It depends on what you are trying to achieve. A circle is great to back-fill faces and to provide fill on a whole subject you might want a larger rectangle. I also find that I can control a rectangle or oblong better with clamps on a light stand and typically have someone hold a circle.
Question: Does this pac kit work for a 2009 chevy impala
Answer: It's folds into a circle that measures 12.5 inches
Question: Tahoe lt with Bose and 2nd row controls
Answer: 7lbs

PAC AOEM-MAZ2 Interface That Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System

PAC

Based on 371 reviews Check latest price

Product description

Interface that allows the replacement or addition of an amplifier in select Mazda vehicles Without premium Bose sound system. Four female RCA Output jacks connect to amplifier. Not designed for use with Bose systems.

  • Interface is Transformer isolated
  • Maintains phase
  • Linear from 20-20, 000 Hz
  • Provides 2: 1 gain and infinite attenuation
  • Input connectors plug into factory stereo and vehicle harness
  • Interface that allows the replacement or addition of an amplifier in select Mazda vehicles without premium Bose sound system
  • Interface is transformer isolated

User questions & answers

Question: Will this fit a 2010 mazda 3 grand touring sedan with bose 10-speaker
Answer: The harness, box, and instructions are included.
Question: I ordered this item and i was instead sent a used pac aoem-frd24 instead. if i order this again can you guarantee i'll get what i pay for this time
Answer: Almost always the stripe wires will be negatives and the solid wires will be positive.
Question: Will this fit in on a 2015 Mazda 6 Touring (Non-Bose
Answer: Most likely it depends on what you are trying to do. If you care about having a left and right channel(for a LR 6x9 setup or something along those lines), I would tap into the LR rears. If you are just installing another sub, connecting this to the stock sub shouldn't be a problem
Question: Is this unit only for adding a subwoofer amp, or can it also be used for adding a 4 channel amp for the door speakers (like the stock bose system
Answer: this is an adapter to convert speaker output to rca. usually aftermarket head unit will have the rca output that you can plug straight to amplifier

PAC TR-4 Remote Turn-on Module

PAC

Based on 121 reviews Check latest price

Product description

Module senses voltages as low as 0.8v and provides a 12v output with a 1-second delay. Can be triggered off of speaker leads or +5 remote wires.

  • Remote Turn-On Module
  • Used to turn on remote amplifiers
  • 2 Second delay to prevent turn-on noise
  • Supplies 2 amps of current
  • Can drive multiple amps or a power antenna

User questions & answers

Question: Will this work to pass 6v dc to a servo motor
Answer: this is the r2, there are no more of the old modal.
Question: How long does it output the trigger voltage after audio input source is off
Answer: Yes
Question: How is it installed specifically, I have a 2004 acura rl with a stock radio and i am confused on where I should hook these certains wires to
Answer: Check their website!! It worked in a 2016 Scat!
Question: what gauge are the wires
Answer: Yes you can use a remote wire to turn amp on from pac

PAC TATO JBL Amplifier Turn-On Interface for Toyota Vehicles,Black

PAC

Based on 82 reviews Check latest price

Product description

Retains functionality of the factory-installed JBL audio system when the factory Toyota radio is replaced. Compatible with all level JBL systems including JBL Synthesis.

  • Retains the use of the factory JBL amplified audio system when the factory radio is replaced with an after market radio
  • Retains the factory functions of balance and fade
  • Simple plug and play connectivity
  • Compatible with the 5.1 and 7.1 Synthesis surround systems
  • Retains JBL or JBL Synthesis amplifier
  • Adjustable gain settings for optimal audio configuration
  • Retains balance and fade capabilities
  • Quick and simple installation

User questions & answers

Question: Will this work for my 2006 tundra with aftermarket
Answer: Blue and Green effects
Question: Does it work for 2010 toyota Prius
Answer: Blue and green subjects
Question: Will this work in 2007 Toyota Avalon
Answer: Twist it like an 8, then fold together and it is a smaller circle that perfectly (well, a bit snug) back into the container.
Question: will it fit 2005 sequoia sr5 with jbl radio
Answer: Can I take it that you are having trouble folding the reflector? If that is the case, go to that popular video sharing site, and look up how to fold a bandsaw blade. Laguna Tools has a short segment that breaks it down. Essentially, the reflector is a bandsaw blade with attached fabric. Note, there will be three sub-panels when properly folded.

Latest Reviews

View all