14 best 4 submersible pumps

Product description

1HP, 230V/60HZ/1PH, 7 stage, 30 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4 NPT discharge. Warning: This is 220V pump! Specifications: 4" deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4 NPT discharge Industrial grade heavy duty, also good for home usage Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9A, or MA0459X-14A; Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps. Water temperature: (32 113of) Trans mediums Ph.: 6.5 8.5 Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance. High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start. Built in control box. This pump DOES NOT require an external control box! This pump uses high quality UL approved motor, UL file No.: E233961 This is a 2 wire pump (2 wires + ground wire) 10' long electric cord included. Heavy-duty thermoplastic impellers, diffusers, and intake screen. Built in check valve included. Submersible design creates quiet operation Unique design reduces its noise. 207 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' for the pressure tank applications. User's manual included and installation tape kit included. Warranty: 12 months limited manufacturer's warranty

• American company
• Pump, Deep Well Submersible Pump, 1HP, 220V 60HZ, 30 Gpm, Stainless Steel, for 4" or bigger well, long life
• 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
• Submersible Pump

User questions & answers

Question:	Well is 300 feet deep will this pump and electrical cord work
Answer:	I used this pump for less than 75 ft well. Pumps good with great pressure.
Question:	Will this pump work in a 4" ID well casing
Answer:	It should. But if you have rust or dirt built up in the casing, the casing size maybe less than 4" which may cause problems for the pump.
Question:	Does the hallmark ma0414x-7a deep well pump come with electrical cable
Answer:	The cable is about 6 feet long that comes attached to the pump. You can get the electrical splices and the wire you need to complete the installation from Home Depot.
Question:	How long is the electrical cable that comes with the pump
Answer:	The electrical cable that is integral to the pump is a few feet long and can be spliced to the electrical line going back to the power box. I believe it was ~6ft. long. In the spirit of too much information: The splice technique I used was to get a submersible splice kit (available on Amazon or Lowe's). It comes with the splices and a special heat shrink tube that has a rubberized coating that oozes out when it is shrunk over the splices. I also covered the splice with 3M type 33 black tape as an added insurance policy. This tape is putty-like and bonds to itself when wrapped. I also used the 3M tape to cover all of the barbed fitting/hose clamp plumbing joints and the cast housing of the pump. The pump has been in for several months and works like a champ. You will not be disappointed with the quality and performance of this pump.

Product features

Hallmark Industries MA0414X-7A Deep Well Submersible Pump, 1 hp, 230V, 60 HZ, 30

This is 220V (230V) pump. Does not work for 110V (115V).

Product description

Tips:

A 3.3ft long water pipe is provided with the product

• 【Ultra Quiet Design & Perfect Motor】The relible and duarable motor does not produce much noise, you can only hear the sound of water flowing. It can elevate column of water up to 2.6ft ( 0.8m). (Make sure to connect a water pipe to the smallest nozzle , make sure the joint sealed securely and tightly). Equipped with a free 3.3ft tubing come with the package.
• 【Adjustable Flow Rate】The maximal flow rate can be up to 80GPH(300L/H), designed with a adjusting knob, allowing to adjust the water flow rate, the minimum flow rate is 20GPH(75L/H), with two nozzles(1/3&1/2in), providing different water flow effects. The right water flow can protect your pet and save water.
• 【Compact & Mini Size】The mini size like an egg(1.87x1.68x1.24in) makes the water pump easy to hide or disguise. Suction cups is great for mounting onto the glass surface. Designed for small to medium size fountains, aquarium, water features and hydroponic systems.
• 【Detachable & Cleanable】No need any tools to detach it, easy to seperate, easy to clean.
• 【Warranty】: Super quality & durable; Comes with 18-month warranty; Our customer service will answer any questions you have within 24 hours

Product features

Homasy 80GPH Mini Submersible Water Pump

This Homasy submersible water pump features quality motor to deliver powerful performance and lower noise. Mini size makes the water pump easy to hide or disguise, perfect for small to medium size aquarium, tabletop fountains, water gardens and hydroponic systems

Adjustable Water Flow Rate

The adjustable knob enable you to control the water flow rate to get your desired water pressure

Ultra-quiet Operation

High quality motor and 4 strong suction cups provide you with comfort and quiet environment

Compact Design

Dimensions:1.87in x 1.68in x 1.24in, the mini size makes the pump easy to hide or disguise in the water

Fish Tank

Small Fountain Pump

Pet Fountain Pump

• Model:SPX-24
• Open flow :12LPM/3.2GPM
• Volts:24V Amps:5.0, MAX;Pump lift:230ft/70M
• Maxmum submersible:100ft(30M)
• Note:Thermally protected.Do not pump flammable liquds.

User questions & answers

Question:	Can this be used without solar panels
Answer:	Yes. Ours is hooked up to DC converter Only low flow pump we could find for low output well.
Question:	I bought 1/2 poly pipe (160 psi) but the pipe is to large for the fitting. What have others used? Is there any adapter I can use
Answer:	I used the adapter off the old flowjet pump...a 3/8 to 1/2 connector hose barb I think and a section of braided softer plasticrubber? hose that can be forced onto both the 12mm pump fitting and the 3/8 barb. Lowes has several sizes...bring the fittings to confirm the fit.
Question:	what size wire would I use for this pump located 150 feet down and another 60 feet to battery and solar panels
Answer:	10awg wire size will be good up to 240 feet. Also the 150 feet of the wire and the connections must be water proof since it is in the water.
Question:	what dc pump controller can I use with this
Answer:	I am using a 120/240 volt float type stock well with float control. The current draw is low enough to also use a basic water well pressure switch. Just make sure you do not exceed pump rating. (.433 psi/foot) 50 psi shutoff equals 116 feet of lift.

Product features

Specifications For

Voltage: 24V DC

Design: 3-Chamber Positive

Displacement Diaphragm Pump

Flow Rate: 3.2 GPM (12 LPM)

Fitting: 1/2" Barbed Fitting

Max. Amps: 5A @ 24v ; Max. Lift: 230ft/70m

Max. Submersion Depth: 100 ft (30m)

Inlet Screen: 50 Micron Stainless;Steel Inlet Screen

Existing Power Cord: 9 ft

Dimensions L x W x H (in.): 3-15/16" x 3-15/16" x 12.95"

Product Features

1. For 4" wells or larger

2. Quick disconnect with "Watertight-Gland" Design Pat Pend

3. Corrosion-proof housing with stainless-steel fastener

4. Run dry without damage

5. State of the art solid diaphragm

6. Stainless Steel fastener

Could be use to

* Offers a solution to your remote water needs.

* Designed to be used with solar panels and 24v battery systems

* This means Easy Hookup to most any existing solar panels or wind generator systems.

* Can be used with or without components such as voltage controllers.

* Can be used for livestock watering, irrigation, ponds, remote homes and cabins.

* Unique water blocked cable connector is impervious to water leakage and condensation problems preventing water-wicking.

* Application: Great for livestock watering Deep well, remote home and cabin.

Product description

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

This is our Stainless Steel Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. 

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-The 3-wire + ground wire design provides a control box for easy provision and energy efficiency.

-The outlet is also made from stainless steel and not iron or brass like lesser quality pumps.

-The well pump submersible is easy to install and extremely versatile.

-Heavy duty stainless steel body fit for home usage and industrial.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps. 

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function.

-2 years warranty.

NOTICE: Our pumps are checked for physical damage before they're shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

 

• Submersible Deep Well Pump.
• Premium line featuring stainless steel impellers.
• 30% more pressure than regular plastic impellers using the same horse power.
• For 4" casings and bigger diameter.
• 2 Years Warranty.

User questions & answers

Question:	Does this pump include the power box
Answer:	Yes it does! But when they say 4” their not kidding i could never get it down true 4” casing
Question:	Does it have a low water cutoff switch
Answer:	Hi, it does not have a low water cutoff switch.
Question:	What is the gpm at
Answer:	Hi, at 650 it would probably get less than 5 gpm, closer to 2 gpm, while this is a heavy duty pump it isn't recommended to run that close to the maximum for longevity purposes, either way if you do, add some additional check valves around every 100 feet... that would be the standard for any deep well pump to ensure it lasts you a long time
Question:	Where is this pump made
Answer:	HI, it's made in China, regards - Oscar PREMIUMPUMPSUSA

Product description

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX!

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT 'Manufacturer Refurbished'.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The well pump submersible is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function.

-1 year warranty.

NOTICE: Our pumps are checked for physical damage before they're shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

 

• Submersible deep well pump.
• Upgraded 2019 model with new axial load design provided additional pressure and GPM.
• Sturdy stainless steel casing to ensure prolonged lifespan.
• 2-wire + Ground, direct start model - no control box required.
• One year warranty.

User questions & answers

Question:	How do you offer a one year warranty yet I can’t send it back after thirty days
Answer:	U send it to manufacturer not Amazon after 30 days
Question:	Can I add a three year warranty after my purchase but before delivery
Answer:	Hi, we don't hve any option for extended warranty at the moment, kind regards - Oscar PREMIUMPUMPSUSA
Question:	Do you have a chance pump curve
Answer:	Hi, yes, it's on the fifth picture in the listing, regards - Oscar PREMIUMPUMPSUSA
Question:	Can this pump be used in a horizontal position
Answer:	Hi, it can be used tilted to an almost horizontal position but no completely flat because the built in check valve can't work that way, kind regards - Oscar PREMIUMPUMPSUSA

Product description

Note:

1.Even all the products have been checked and tested that they are qualified and well packaged with the new durable packaging.

But still some products may damaged through the long-distance shipment.If you have any problems about our product，please send your message to us at first time！



2. As this aquarium pump is submersible, and need to be put into water fully before power on to avoid the aquarium pump burning out. Prohibit no-load running.

It would shorten its lifespan and lead tomaking loud noises when running in the air for long time, Whenchanging water, please disconnect power supply.



3 .If the product suddenly stop working or make noises, which may caused by debris blockage. Please clean it regularly about once every two months.



4 .Insufficient power and insufficient frequency would affect the fountain pump’s flow rate.



Specifications:

Power: 4Watt

H-Max (Lift Height): 65-70cm

Length of Power Cord: 5ft (150cm)

Max Flow Rate: 280L/H



Features:

【Must be Fully Submerged】

【Mini Size Aquarium Water Pump】

【Ultra Quiet Design Fountain Pump】

【Adjustable Flow Rate Aquarium Pump】

【Easy to use & Clean Water Fountain Pump】

Package :

1 * Mini Submersible Water Pump

1* Nozzle

• Ultra Quiet Design: The relible and duarable motor does not produce much noise, giving you quiet environment.This submersible pump is designed for small to medium size aquarium, Fish tank, Pond, tabletop fountains, water gardens and hydroponic systems.
• Adjustable Flow Rate: Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 95 GPH. It can elevate column of water up to 3.0 ft.
• Detachable & Cleanable: No need any tools to detach it, easy to seperate, easy to clean.
• Mini Size: The mini size makes the pump easy to hide or disguise in the water. Dimensions:1.8 x 1.8 x 1.4 inch
• Pump Accessories : 3 suction cups & one Nozzles : Suction cups is great for mounting onto the glass surface. Equipped with a 0.3" diameters nozzle

User questions & answers

Question:	Can anyone tell me what the nozzle is for
Answer:	I wondered the same thing because replacements are not on the web site -- at this price its still a good deal to just use the filter that comes with it for hundreds & hundreds of gallons . the pump will probably be worn out by that time
Question:	Is this ac or dc power
Answer:	Dear customer, Glad to help you. Yes, it has a replaceable activated carbon filter. Have a nice day.
Question:	Does the clear about 1/8 inch aquarium tubing attach to this pump
Answer:	Dear customer, Glad to help you. It can filter up to 5000 liters of water. It can filter up to 5000 liters of water. Please replace the activated carbon filter when you feel the effluent smells or tastes bad. If cracks are found on the ceramic filter element, it should be replaced. Hope it will help you.
Question:	Can the cord be unplugged from the unit? I want to thread it through a hole in a fountain
Answer:	Dear customer, Glad to help you. Yes, this water filter bottle can filter out fluoride in the tap water. It will make the water taste better.

Product description

Tips:

us standard plug is included in the package, which is only suitable for the US, Canada and mexico



the VicTsing submersible pump features Compact, multifunctional, and detachable, perfect for aquarium, tabletop fountains, water garden and hydroponic systems.



compact & powerful

compact design is great for space-saving on your tabletop fountain. The maximal flow rate can be up to 80 gallons per hour. Lift height can be up to 2.6ft.





specifications

max flow rate: 80 GPH (300L/h)

h-max (lift height): 2.6ft( 0.8M)

power: 4 watts

voltage: 110 - 120 V @ 60hz

length of power cord: 5.9Ft(1.8M)

package included: 8.5mm nozzle x 1

13mm nozzle x 1



note

1.Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. Prohibit no-load running. Put the pump into water first before connecting power supply. When changing water, Please disconnect power supply. It would shorten its lifespan and lead to making Loud Noises when running in the air for long time.

3.If the product suddenly stop working or make Noises, which may caused by debris blockage. Please clean it regularly about once every two months, or add some olive oil on the rotor.

4.Please note if the water level, layout of the water tank match the bump power before purchasing. If the water is too little, motor power is too high, so as the water flow level, The swashing water would make loud Noises. Different bump suits different water tank.

5.The maximum flow rate is 80Gph; there might be a plus-minus tolerance, insufficient power and insufficient frequency would affect the flow rate.If connected with a water pipe, The maximum flow rate would less than 80Gph. If the water sprays out the container, The flow rate would also less than 80Gph.

6.Two different sizes nozzles are provided. If you use the smaller one, The maximum flow rate would less than 80Gph.

• 【Water Flow Control】 An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 80GPH
• 【Ultra Quiet Design】 Come with 2 Nozzles (0.33in and 0.51in). High quality motor provides a quiet environment for you. The impeller shaft is stainless steel for long life span and corrosion resistance
• 【Detachable and Cleanable】 No need any tools to detach it, easy to separate, easy to clean.
• 【Suction Cup and 5.9Ft Power Cord】 Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally
• 【Wide Application】 This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Backed by professional after-sale service within 24hrs

User questions & answers

Question:	What is the OD of the tubing
Answer:	HI THERE, WHAT PSI? (PUONDS PER SQUARE INCH) YOU ARE NOT DEALING IN POUNDS. THIS IS A SMALL PUMP WITH A SMALL PLASTIC IMPELLER. YOU CAN PUT YOUR FINGER OVER THE TUBE HOLE AND IT WILL STOP THE FLOW. EVEN RULE BILDGE PUMPS THAT ARE 1,000 GALLONS PER HOUR, YOU PUT YOUR FINGER OVER THE TUBE AND IT STOPS FLOWING. NOW INDISTRIAL AND COMMERCIAL PUMPS HAVE PSI, NOT THESE LITTLE THINGS.
Question:	Exactly how long is the power cord
Answer:	Not sure of the output but it works well for a small table top fountain..
Question:	Would this pump work for a small river in a fairy garden
Answer:	I don’t know for sure it came in plain packaging. But I can tell you that it’s better that the pump that came with the fountain.
Question:	What size tubing can I put
Answer:	DONT UNDERSTAND YOUR QUESTION. ARE YOU ASKING: WOULD THIS PUMP WORK WITH HOT WATER? YES. WHERE CAN I BUY A PUMP LIKE THIS? AMAZON OR EBAY.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91250 1/4 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

Product description

Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box

Features & Technical Specifications:

* 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing).

* 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge.

* Industrial grade heavy duty, also good for home usage.

* Patented impeller & 12 stage unique design provide a much longer pump life than other brands.

* 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.

* 400 ft is total water head.

* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5

* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.

* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.

* This pump comes with a starter box (control box).

* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy

* This is a 3 wire pump with ground wire (total 4 wire)

* 10' long electric cord, installation tape & electric tape kits are all included in the package.

* Heavy-duty thermoplastic impellers, diffusers, and intake screen.

* Unique design reduces its noise.

* User's manual included. Free technical support available during your installation.

* This pump has a built in check valve. However installing additional check valves is required.

* Shipped with pump head and motor separately. Assembly required.

User questions & answers

Question:	What is the gpm and psi ratings on this pump set at 300' deep
Answer:	If the water level is 300', the max psi the pump can produce is 43 psi. Please note it is based on the water level, not where the pump is. At max psi the flow is 0 gpm. At 300' water level with no pressure, the flow is about 15 gpm. Thank you.
Question:	Do you have a 3/4hp, 220 volt 4" deep well pump
Answer:	Yes. The part # is MA0459X-14A by Hallmark Industries Inc. Thank you.
Question:	Can you upgrade control box? If so, what type/size did you upgrade to
Answer:	The control box contains a starting capacitor which is designed to match the pump. So you can not change the control box. Thank you.
Question:	Do you have 3" 110 volt with 1" outlet box built in
Answer:	Yes. This is the link: https://www.amazon.com/Hallmark-Industries-MA0459X-14-S-Shell-Stainless/dp/B07BPFJ9BQ

• 【ULTRA-QUIET DESIGN & LONG LIFE】In order to keep the pump quiet and have a longer life, increased the cost by using high quality rotor and 100% pure copper,make the pump quiet & long life.
• 【DRY BURNNING PROTECTION】Considering that the users will forget to add water, we have added a temperature control protection switch inside the pump. When the pump is running-dry, it will automatically cut off the power when the temperature of pump is high,360-hour dry burnning protection,Don't worry that there is no water in your fountain, which will cause the pump to burn out.
• 【HIGH PERFORMANCE】 After a period of use you will find out that our water pump is "High flow rate, Low power consumption,Energy-saving &long life".
• 【WATER FLOW CONTROL】 An adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 150GPH(550L/H).
• 【Small but Powerful】 The pump is a small pump which has L2.5in*W1.7in*H2.2in, please do not let it to work in a large fountain.

User questions & answers

Question:	Where is it made
Answer:	11-11 1/2
Question:	What does 360 hour anti burn out protection mean. What does the 360 hours refer to exactly
Answer:	After sending back the first pair because they were too small, I ordered the next size up. The next-size-up IS large, but it's a great shower sandal ... and I'm making do with the slightly-too-large size. I shuffle a little, but these are really comfy and well made.
Question:	What are dimensions of the pump without the cover on it
Answer:	sandals
Question:	Is this pump dual voltage; ie can it operate at 220V
Answer:	Hi，dear customer, thnak you for liking our shower slippers, but for the US 11-12, we have no size for that size now, but for your good advice, we will consider to make this size of bath slipper this time. and if we ship them to the amazon, we will inform you to purchase it. thank you.

Product features

Knifel 150GPH Submersible Water Pump

The small size makes it easy to hide&install, perfect for fountains,fish tanks,small ponds&hydroponic systems etc..

Ultra Quiet Design

Using advanced technology and high quality materials，noise less 30% than other pumps.

Dry Burning Protection

This pump will automatically power off once the motor overheated, and restart automatically after motor cool down.

Water Flow Control

An adjustable knob to control the water flow rate, so you can get the pressure you want. Maximum flow rate: 150GPH.

UL Approved

Knifel pumps are UL listed, Beware of other brands that do not have certification.

Fountain

Aquarium

Pond

Hydroponic

Product description

Tips:



US Standard Plug is included in the package,which is only

suitable for the US, Canada and Mexico.



Model:AM-126

Voltage:110V-120V/60Hz

Power: 4 Watt

F-Max: 80 GPH

H-Max: 2.5 ft

Power Cord:5.9ft

Dimension: 1.8 x 1.8 x 1.4 inch

Water Pump x 1

1/3" Nozzle x 1



IMPORTANT NOTE:



1. As this aquarium pump is submersible, and need to be put into

water fully before power on to avoid the aquarium pump burning out.

Prohibit no-load running. It would shorten its lifespan and lead to

making loud noises when running in the air for long time, When

changing water, please disconnect power supply.



2. If the water pump is stuck by anything like Mud, garbage, sea salt,

etc. need to be cleaned with clean water before use.



3. The operating temperature range:40-95℉.



4. Due to all the pumps need to be professional water testing by our

manufacturer before shipment, if the water pump you received

has a little water, please don't worry, the little water was left from

professional water testing, it is a normal phenomenon. It is new

and normal pump.



5. Due to the shipping transport, one or two broken pump is inevitable,

if you received the shipping damaged pump, please get back to

us to get the replacement or compensation.



6. The inner shaft will be with a bit little little lubricant to ensure the

motor is working well, If you are raising sensitive fish or aquatic

plants, please use them in other tanks for a short time then move

it into fish tanks. If the product suddenly stop working or make

noises, which may caused by debris blockage. Please clean it

regularly about, or add some olive oil on the rotor.

• ★【Ultra Quiet Design】: The relible and duarable motor does not produce much noise, giving you quiet environment.This submersible pump is designed for small size aquariums, Fish tanks, Pond, desk fountains, pet cat dog water fountain, water gardens and hydroponic systems.
• ★【Adjustable Flow Rate】: Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 80 GPH. It can elevate column of water up to 2.5ft.
• ★【Mini Size】: The mini size makes the pump easy to hide or disguise in the water. Dimensions:1.8 "x 1.8" x 1.4".
• ★【EASY TO USE】: No need any tools to detach it, easy to seperate, easy to clean, And simply plug in power for quick water draining.
• ★【Must be Fully Submerged】: this submersible water pump is designed to sit in water, water inlet must be completely submerged in water. With 3 suction cups at bottom, you can install the pump to spray water horizontally or vertically. Power cord is 6ft long and waterproof.

User questions & answers

Question:	how many psi
Answer:	Not sure. I used the tubing it cane with.
Question:	what is the maximum water spout produced by this fountain
Answer:	My experience has included the manipulation of the unit in various circumstances, including fully submerged in water. My conclusion would be a "yes" as, all indications are that it is.
Question:	Where is it made
Answer:	Haven't tried that as I bought for fresh water fountain
Question:	How do I find a small water pump like this for hot water
Answer:	It could be used in an aquarium. I think there are better options though. This pump was designed for ‘clean’ water and as a pump to lift water for like a fountain. I suggest you check out something like Marineland’s circulation pumps that mount on the glass and can be directed to where you wish. Good luck on your project.

Product description

The ST.E.P Plus D-Series 4" submersible pump series dominates with superior "DRAW-DOWN" capability. Great for effluent, cistern, aeration, and irrigation applications. Stainless steel body construction (300 grade). The motor is 1/2 HP, 115V, single phase, dry-wound, double ball-bearing, double-seal, with thermal overload protection. 4-1/2" pumping drawdown. 60Hz, 2-wire. Float switch not included with ST.E.P models. Exclusive self lubricating Nylatron bearing resists wear surface from sand and abrasives. Precision molded Acetal impeller for perfect balance; ultra smooth for the highest performance and efficiency. Allows for 0.08" solids. Comes with 10' power cord.

User questions & answers

Question:	Can i use this to replace sta-rite 20dom
Answer:	Yes it goes by US sizes
Question:	Does this pump have an auto shut off? or a built in limit switch
Answer:	Ii is the same with shoes size . If your size is 9 then select size 9 Sandal.
Question:	Is this pump a good replacement for the Myers pump they install in a Multi-Flow affluent tank
Answer:	Not sure, but they run a little small so better to go a size up then down.
Question:	I have a sta-rite model: step20-01 submersible well pump. is the 20dom05121 compatible or interchangeabl
Answer:	I think the length will be longer I'm a 9 and straps fit good hope that helps

• 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
• 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.

User questions & answers

Question:	Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water
Answer:	Yes
Question:	What size tubing should you buy to fit the .74 inch adapter
Answer:	Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc?
Question:	Where exactly is the inlet? If used as a small sump pump, how much water will be left
Answer:	The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps.
Question:	Does it have / need oil or lubricant? Would keg lube work
Answer:	no need to lube. just plug and run it in water.

Product features

VIVOSUN 800GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

3 oulet adapters

Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).

4 suction cups

The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

Parameter details

Power: 24W; Voltage: 110-120V

Flow: 3000L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

Tips: US Standard Plug is included in the package,which is only suitable for the US, Canada and Mexico

 

Dry burning-resistant protection function

Did you still remember that your once favorite water pump burnt out when you were on a business trip or when you forgot pouring water into your fish tank? Our submersible pump is the right choice for you. Unlike other common pumps, this one can support about 48 hours dry burning.

Refresh Water 

Keep circulating and aerating the water in your tank and give your beloved fish or 

turtles a near-natural environment, ideal for small to medium size aquarium, ponds, water gardens and desktop water fountains.

Specifications:

Product Dimensions: 4.5*4*3cm/1.8*1.6*1.2in

Net Weight: 140g/4.9oz 

Max Flow Rate: 79.25GPH

H-Max: 2.6ft

Voltage: 110-120V @ 60Hz

Length of Power Cord:5.6ft

Power: 4W

Color:Black

Package Included: 

1 x 4W Water Pump

1x Nozzle (8.5mm/0.33in)

1x Nozzle (13mm/&0.51in)

1 x User Manual

Note: 

1. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply. 

3. Please clean it regularly in case of debris blockage, the pump would make noises if blocked.

4. It is advisable to use a lubricant when the motor makes loud noises. The lubricant oil of electric hair clippers is a good choice.

• 【New Dry Burning Protection Function】: Adding the function which withstand 48 hours dry burning. No need to worry about there is not enough or no water in your fish tank when out for a short trip.
• 【Ultra-Quiet Operation】: Running at a whisper-quiet level, the motor inside produces no noise, which gives you a quiet environment even with one in your bedroom. 3 Strong suction cups suit both vertical or horizontal mounting firmly onto the glass surface
• 【Detachable & Cleanable】: Dimensions: 1.8*1.6*1.2inch (45 *40*30mm). The small size makes this water pump easy to hide or disguise. The device doesn't need any tools to disassemble it and is very easy to be cleaned. The 5.6ft (1.7m) long power cord offers convenient installation
• 【Water Flow Control & 2 Nozzles】: The adjustable switch design enables you to easily adjust the water flow rate to meet your need. The maximum water flow rate: 79.25GPH (300L/H). The maximum lift height: 2.6ft (80cm). 2 Nozzles of 8.5&13mm (0.33&0.51in) for your options
• 【Wide Application】: This submersible pump attracts your fish or turtles a lot as it keeps circulating and aerating the water. Perfect for small to medium size aquarium, fountains, spout, water gardens and hydroponic systems, etc.

User questions & answers

Question:	what is the width and depth of this pump in inches please
Answer:	Thank you for your question, the Product Dimensions of this pump is 4.5*4*3cm/1.8*1.6*1.2in. With any other question, please feel free to contact us.
Question:	What size tubing do I need with this
Answer:	You're in luck with this little pump because you have a choice in the size of the hose you want to use. There are three hose fittings that come with this pump. 13 mm, 16 mm, and a 19 mm. What ever the job is I am sure you will find the right size hose.
Question:	Will it pump 2 ft vertical
Answer:	It is a strong pump. It lifts about two feet in my fountain
Question:	Can this be used in an outdoor fountain
Answer:	I used it in an outdoor fountain, it did not last three months.

Product features

Dry burning-resistant protection function

Did you still remember that your once favorite water pump burnt out when you were on a business trip or when you forgot pouring water into your fish tank? Our submersible pump is the right choice for you. Unlike other common pumps, this one can support about 48 hours dry burning.

Note:

1. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply.

3. It is advisable to use a lubricant when the motor makes loud noises. The lubricant oil of electric hair clippers is a good choice.

Disassemble & Cleanable

The device doesn't need any tools to disassemble it and is very easy to be cleaned. Please clean it regularly in case of debris blockage, the pump would make noises if blocked.

Specifications:

Product Dimensions: 4.5*4*3cm/1.8*1.6*1.2in.

Net Weight: 140g/4.9oz.

Max Flow Rate: 79.25GPH.

H-Max: 2.6ft.

Voltage: 110-120V @ 60Hz.

Length of Power Cord:5.6ft.

Power: 4W.

Color:Black.