14 best saltwater pump for 250 gallon tank

• ★Smart control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.）
• ★With bottom suction trainer,100% submersible.
• ★Maximum flow rate: 840 GPH STRONG POWER and HIGH LIFT. Max Lift Height: 9.2 ft. 60W high efficiency motor for energy saving.
• ★Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.
• ★Backed by 12 month warranty and professional after-sale service within 24hrs.

User questions & answers

Question:	Can you use this pump while simming in pool or pond
Answer:	I had it on a 60 gallon tall at about 33 percent and it was perfect. Cycling the tank around 7-8 times per hour. My Fish never seemed bother by it. To be honest though it does depend on what fish/corals you are keeping. Some like more flow then others.
Question:	How loud would this be inside
Answer:	24V DC Return Water Pump with Controller 60W misting system have 3 nozzle :0.78in, 1in, 1.2in, you can buy a Adapters, so that it can work, and H-Max (Lift Height): 19.6ft( 6m),DC Return Water Pump with Controller 100W,have 2 nozzle : 1.2in,13.78in
Question:	What size is the barbed fitting
Answer:	I have not had that problem with my unit. I do know on other dc gear I have if the connection between pump and controller is getting wet it can cause it to heat up. If not that I would suggest contacting the manufacturer for a replacement.
Question:	can this be used to pump out a 2000 gallon garden pond for water change
Answer:	24V DC Return Water Pump with Controller 2245gph 60W,There are 3 Nozzles, Nozzles size: 0.78in, 1in, 1.2in

Product features

FREESEA 840 GPH Water Pump

1.Ultra Quiet: Water pump sound less than 20 db ,almost hard to feel.

2.Dry burning-resistant protection function: Smart control, dry running automaticly cut power.

3.High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance.

Specification

Max Flow Rate: 840 GPH

H-Max (Lift height): 5.9 FT

Power: 60 Watt

Voltage: 110 - 120 V / 60Hz

Length of power cord: 5.9 FT

Energy saving

60 Watt Low power motor.

Seamless movement Hydrodynamic design(Helps reduce power consumption).

4*Nozzle

1*1/2-inch

1*2/3-inch

1*4/5-inch

1*1-inch

Durable Copper wire motor

Durable Copper wire motor

Effectively improve service life and reduce motor failure.

Product description

Jebao 80W 10000LPH DC Controllable Aquarium /fish tank Water Return

Pump with Wave Function DCQ-10000(2650GPH) ;



Model: DCQ-10000

Pump size: 200L*90W*120H mm（7.88L*3.54W*4.72H inch) with intake screen;

162L*90W*120H mm(6.38L*3.54W*4.72H inch) without intake screen

Wire Length: 2.7 M

Max Flow Rate: 10000 LPH(2650GPH)

Max lift head: 5.5 M(18FT);

Input Voltage: 110-240V 50/60HZ

Output Voltage: DC 24V;

Watts: 80W

Fitting/Connector outside Diameter:

38MM/32MM/25MM/20MM



Package included:

pump, controller, power supply,intake screen cover, barbed fitting(8PCS),fitting nut and O-ring,

user manual and adhesive pad for the controller;

Feature:

High performance with innovative electronic motor and energy saving up to 65%

IC electronic detection, automatic power- off protection upon no water

With external electronic driver, longer operation life;

Suitable for fresh water and marine water

• Jebao 10000LPH(2650GPH) aquarium DC Controllable fish tank water return pump with wave function,can be used as fountain pump,hydroponic pump ,fish pond pumps,and aquarium water pump
• 80W Four-pole electronic motor,ultra silent operation,Used as submersible water pump or inline pump with 5.5 meters(18feet) max head/lift
• LCD Power display and 30-100 stage speed flow control,with feed mode and wave function
• Low voltage DC24V power supply, saftey protected against leakage
• Fe2Q3 magnet rotor and wear-resistant anti-corrosion ceramic shaft,longer life and more efficient ,seal impeller

User questions & answers

Question:	Does the input housing attach with titanium bolts or does it twist and click
Answer:	The input housing are attached with titanium bolts with pump body.
Question:	At 30% how many gph is it pumping? What’s the lowest gph it can tan at
Answer:	lowest at about 1050GPH when at 0 lift
Question:	Is it wave mode all the time
Answer:	no,you can press the button to cancel the wave mode
Question:	Does this come with fittings for 22ml hose which is the the size of the hoze on my current return pump
Answer:	yes,it fit,this pump comeswith 4size barbed fittings in outside diameter 20mm,25mm,32mm,38mm

• The IOAOI protein skimmer is equipped with an LED controller. The operation and the status could been seen easily. The water flow of the pump could be adjusted as required. And there are 20 gears, the power consumption of which is from 4W to 23W.
• Patented needle shaped diversion plate helps to generate much richer bubbles. Better reaction. And it could prevent the bubbles/foam from returning, and could also provide long contact time between water and air, which makes the protein skimmer obtain better performance.
• 23W pinwheel DC water pump adopts advanced frequency conversion technology, high efficiency and energy saving. Ultra quiet. Multi-gear adjustment.
• Constructed of high-quality cast acrylic to guarantee long life. For in sump use only.
• Foot Print/Height: 9*6.9/20 in. Recommended sump water depth: 7" to 9".

User questions & answers

Question:	Are there any instructions on this thing? Need to know what the buttons on controller do
Answer:	It will do fine for your 30 gallon now. But this skimmer is only rated for 65 gallons max, and probably not even that. Manufacturers almost always overrate their skimmers.
Question:	Hello i have a 90 gallon reef tank, i plan on having heavy load in future. do i need 150 or 180? thanks
Answer:	5x7.5"
Question:	Hi, i did not receive a operation instructions with my skimmer, could i get some information on how to make it work correctly
Answer:	Yes....it will do great...you got to keep it in 7" of water in the sump.
Question:	I purchased a 150 before I bought my tank was able to get a larger tank a 180 gal. will the 150 handle that load or do I need to change to the larger
Answer:	the foot print is 4.25" x 7" x 17" High

Product features

Note please

Most of the protein skimmers are equipped with alternating current "AC" pumps (the type of power that comes out of your wall outlet). The IOAOI Direct current “DC” pumps have several key advantages over traditional AC pumps. Most notably, you can adjust the rotational speed of the motor which controls the air and water flow rates into the skimmer as required. And it converts alternating current to 24V direct current, which would be safe to you and your marine organisms.

Product description

Fluval FX4 is a high performance canister filter with many outstanding features designed to make aquarium fish keeping easier and more convenient than ever. This super capacity yet compact canister filter has a pump output of 700 gallons of water and has a filter circulation of 450 GPH, which both work to produce cleaner and healthier results. Filtering material can easily be placed in a removable stack of media baskets, which is at the heart of Fluval's multistage filtration. The baskets are precision-engineered to eliminate water by-pass, making filtration more efficient. The baskets can hold a total of 1 gallon of media and can be stacked in the precise combination of layers that will work best for your aquarium. Each one is lined with a foam insert for effective mechanical pre-filtering. Instant-release T-handles let you lift and separate the baskets quickly and easily, making routine maintenance simpler. FX4 also features Smart Pump Technology, which provides optimal filter performance. This advanced technological feature employs an electronic circuit board that continually monitors the pump. Impeller speed and force are constantly measured to ensure powerful output and energy efficiency. It also manages the filter's self-starting feature and evacuates air that may enter or build up within the filtration system. On a 12-hour cycle, the pump will pause and allow trapped air to escape, ensuring the best filtration efficiency. Only 16.5 inches in height, FX4 fits under most aquariums.

Fluval first broke onto the aquatic scene in 1975 by introducing the world’s first 3-stage filter with synchronous motor technology. Since then, Fluval has built a legacy around this pioneering spirit, relentlessly adapting in a changing world to launch innovative aquarium products. Fluval’s mission is not just about building products that mimic the natural world, but inspiring aquarists of all skill levels to enjoy and respect the hobby for generations to come.

• Multi-stage filter pumps out 700 US Gal (2650 L) of water per hour
• Smart Pump advanced microchip technology continuously monitors and optimizes pump performance
• Self-starting – just add water, plug in and Smart Pump will take over. Trapped air auto-evacuated every 12 hours to ensure maximum efficiency
• Easy water changes eliminate need to lift heavy buckets. Simply attach hosing to output and Smart Pump does the rest
• Removable, stackable media baskets eliminate water bypass and hold a total of 1 US Gal (3.9 L) of media
• Compact 41.9 cm (16.5 in) tall design - easily fits under most aquariums
• All filter media included - mechanical, chemical and biological

User questions & answers

Question:	is it quite
Answer:	Quite? don't even think about it. it gets louder and noisier at night times. normally, an under 30 [db(A)] sound lever is a safe and acceptable lever, but this one will make about 36-38 [db(A)] sound lever in the night. especially in the bedroom (away about 18 feet from the bed), you will need a sleeping pill to put you to sleep. I had one, but after 2weeks, I can't bear with it anymore longer, had to return it.
Question:	I have a 40 gallon tank for two read eared sliders. Would this filter be too strong or just right for my tank? Also, does it come with the hosing
Answer:	I've got it on a 55 gallon and it works fine! With turtles you want at least 3 times the filtration so 40 gallons of water needs a 160 gallon rated filter or stronger. Also it is recommended that you house your turtles separately as they are going to grow to be 8-12 inches long and are solitary in the wild! I recommend you join red ear slider turtle owners resto group on Facebook and they will have all the information on best diet best filters and best tanks for your turtles!
Question:	What do you have to replace for the filter media? And how often I don't believe what the company says about every month
Answer:	This is a very good filter, with "5" stages. The main foam padding, stage 1 and 2, can be rinsed out and reused about 3 times before it starts to get too worn. I rinse it in the water just pulled out of the tank to keep from killing the beneficial bacteria with tap water which contains chlorine. The soft portion of this foam pad does not hold up to even gentle squeezing out. I just rinse out the tiny filter pad, stage 3, at the top of the unit and have not replaced it yet. This thing is pretty durable and surprisingly expensive for what it is. Stage 4, the bio-media should not be replace unless they get damaged. Replacing the carbon media, stage 5, is a matter of choice. Many do not believe in it. I do. If you do use carbon media, remember it gets "full" rather quickly and should be replaced regularly, depending on the kind and amount of fish in your tank, it could last up to a month. Just think of the Brita filters. They are mainly carbon filters, and they make water taste yummy and free of junk. If you are really trying to save, you can buy loose activated carbon and make your own sachets with cheese cloth or those fill-your-own teabags. I've thought about doing that but have not tried it. I've been too lazy, and just purchased the carbon media bags, I believe they are about 8 bucks for 3. Hope that helps.
Question:	The Amazon description mentions "Ceramic heater core for even and efficient heat distribution". Does this have a built in heater
Answer:	The Fluval c2 power filter advertises that it has a ceramic heater core... unless its built in somewhere inside, its not visable period. so with that said, i still had my glass tube style heater and continue to use it with the power filter as i doubt that something i can not even see will heat the 20 gallon long tank enough for that fish i have.

Product features

Fluval FX4High Performance Aquarium Canister Filter

Building on the mighty FX performance and reliability platform, the FX4 high performance canister filter is a compact 'little brother' to the FX6. The FX4 bridges the gap between the Fluval 406 and the FX6 canister filter, making it an ideal choice for aquariums up to 1000 L (250 US Gal).

Key Features

• Multi-stage filter pumps out 2650 L (700 US Gal) of water per hour
• Smart Pump advanced microchip technology continuously monitors and optimizes pump performance
• Self-starting – Just add water, plug in and Smart Pump will take over. Trapped air auto-evacuated every 12 hours to ensure maximum efficiency
• Easy water changes eliminate need to lift heavy buckets. Simply attach hosing to output and Smart Pump does the rest

• Removable, stackable media baskets eliminate water bypass and hold a total of 3.9 L (1 US Gal) of media
• All filter media included - mechanical, chemical and biological
• Aqua-Stop valves with leak-proof Click-Fit attachment system
• Valves positioned at convenient 45-degree angle for easy installation and rotation
• Multi-directional output nozzles can be fully adjusted to create customized water flows

• Rubberized feet help ensure quiet operation 
• Compact 41.9 cm (16.5 in) tall design - easily fits under most aquariums
• Made in Italy 
• For use in freshwater and saltwater aquariums
• Utility Valve with drain hose for easy maintenance and flushing of canister
• Anti-clog, telescopic strainer ensures continuous water flow

Product description

The AQUATICLIFE RO Buddie plus DI is a four-stage RO DI unit designed for residential use to remove the Total Dissolved Solids (TDS) from tap water. Each RO Buddie includes a Sediment, Carbon, Membrane and DI Resin cartridge. Useful applications include smaller aquariums, fountains, humidifiers and more. With incoming water pressure at 65 PSI and water temperature at 77 degree Fahrenheit, the RO Buddie plus DI will produce up to 50 gallons in a 24-hour period, or a little over two gallons per hour. The included tubing and fittings make setup quick and easy.

• ZERO TDS WATER- Produce up to 50 gallons of zero TDS water every 24 hours at an affordable price with the RO Buddie plus DI model, The RO Membrane will remove up to 98 percent of the TDS in water and the DI Mixed Bed Resin will remove the remaining TDS
• SEDIMENT REMOVAL - The five-micron sediment filter cartridge traps particulate matter like dirt, silt, and rust with will affect the taste and appearance of the water
• CARBON FILTRATION - The five-micron activated carbon reduces chlorine and conditions the water prior to the RO membrane
• MEMBRANE FILTRATION - The RO membrane reduces impurities known as Total Dissolved Solids (TDS) from the water down to a ratio of 1 out of 10,000 of a micron, reducing arsenic, lead, parasitic cysts, copper and more
• DEIONIZATION - The color-changing deionization mixed-bed resin removes the remaining TDS from the membrane filtered water

User questions & answers

Question:	Where does the waste water go? I want to install this under my sink for an Insinkerator instant hot water unit. How do I connect it? To drain
Answer:	If you are going under the sink, you would want a drain saddle, they go on your drain plumbing under sink and feed the waste right down your drain.
Question:	What would I need to get for a 220 gallon tank
Answer:	People say that you should do a 10% to 15% water replacement weekly, or 20-30% if it is heavily stocked. If your tank is 220 gallons, you have 200 to 210 gallons of actual water in there, with the rest displaced by gravel, sand, decorations, or what have you, so we're talking about ~25 gallons a week, 50 if it is overstocked. The small RO buddy produces about 14 gallons per day (36 goes down the drain) and so that is sufficient to replace up to 168 gallons per week. I would highly recommend you have a 30 to 50 gallon tank laying around somewhere for the RO buddy to dump into, so that you can just siphon water from the catch tank to your sump weekly as you dump out the old water (makes great fertilizer).
Question:	How can i connect this to my faucet, the garden hose attachment is too big
Answer:	If you hook up often, i would recommend Spectrapure Quick Connect Faucet adaptor. It just snaps on and off, no screwing it on and off like the Lowes/HD type. More expensive but more convenient
Question:	can I add an additional membrane and housing to reduce wastewater
Answer:	Yes you can. Please contact us at 888-548-3480, Mon-Thurs 6:30am-3pm PST and we can help you. Ken / Aquatic Life USA

Product features

RO Buddie Compact Reverse Osmosis & Reverse Osmosis Deionization Systems

The Aquatic Life RO Buddie 3-Stage Reverse Osmosis (RO) and 4-Stage Reverse Osmosis Deionization (RODI) systems feature unbelievable affordability and functionality, all in a very compact, easy to install and mount design.

RO Buddie 3-Stage 50 & 100 GPD RO Systems

RO Buddie 3-Stage Reverse Osmosis Systems - These compact footprint RO units provide economical filtered water! All systems feature unbelievable affordability and functionality in a very compact design, providing a reliable source of economical filtered water for aquarium use. Includes RO Unit, Cartridges, Membrane, Faucet Adapter, Membrane Wrench.

RO Buddie TFC Membrane Housing & Membrane

Designed to provide a reliable source of economical filtered water for aquarium use, all systems use Thin-Film Composite (TFC) Membranes in conjunction with Carbon and Sediment pre-filter cartridges to effectively and efficiently remove harmful substances such as heavy metals, total dissolved solids, Chlorine and particulate matter from tap water.

Upgrade to a 4-Stage With Our DI Resin Cartridge!

Both RO Buddie 3-Stage systems can be easily upgraded to a 4-Stage RO/DI system by adding our Deionization (DI) Color Changing Mixed Bed Resin Cartridge, Item #330242, sold separately. Our DI Cartridge is filled with Aquatic Life MBD-30-NG Nuclear Grade color changing mixed bed deionization resin.

Aquatic Life Drinking Water Add-On Kit for RO & RO/DI!

Amazon item B07371N7PT.

Add-on drinking water kit includes everything needed to convert your current RO or RO/DI unit to a drinking water system. Easy-to-install with our RO Buddie or Twist-In reverse osmosis systems. Pressurized tank and faucet are included, along with the parts needed to bypass the DI (deionization) stage of your current RODI system.

RO Buddie 50 GPD 4-Stage Reverse Osmosis/Deionization System

The 4-stage systems include our improved DI Color Changing Mixed Bed Resin Cartridge with MBD-30-NG Nuclear Grade resin. The Cation and Anion resins (H+ and OH-) in the DI cartridge media remove most of the remaining total dissolved solids (TDS) from membrane-filtered water, and produce purified water with an average conductivity value of ~0.1µS/cm.

Clear Color Changing DI Cartridge Removes Easily for Replacement!

The DI resin cartridge is refillable and has a clear housing so you know at a glance when the media needs to be replaced. Our new MBD-30 Nuclear Grade resin changes color from blue to yellow, then tan when the media is exhausted. Each DI Cartridge includes two clips that allow the cartridge to attach to the front of the membrane housing. Included Mounting Brackets hold the unit securely while mounted in a convenient location.

Quick Connections Make It Easy to Remove and Replace Cartridges

All RO Buddie Reverse Osmosis systems use Thin-Film Composite (TFC) Membranes in conjunction with Carbon and Sediment pre-cartridges to effectively and efficiently remove harmful substances such as heavy metal ions, dissolved solids (TDS), Chlorine and particulate matter from municipal tap water. The 4-Stage RO/DI system includes a DI resin cartridge to remove most remaining TDS.

• The IOAOI protein skimmer is equipped with an LED controller. The operation and the status could been seen easily. The water flow of the pump could be adjusted as required. And there are 20 gears, the power consumption of which is from 19W to 38W.
• Patented needle shaped diversion plate helps to generate much richer bubbles. Better reaction. And it could prevent the bubbles/foam from returning, and could also provide long contact time between water and air, which makes the protein skimmer obtain better performance.
• 38W pinwheel DC water pump adopts advanced frequency conversion technology, high efficiency and energy saving. Ultra quiet. Multi-gear adjustment.
• Constructed of high-quality cast acrylic to guarantee long life. For in sump use only.
• Foot Print/Height: 11.8*8.8/21.5 in. Recommended sump water depth: 7" to 9".

User questions & answers

Question:	How is this skimmer working out? also is this skimmer dead sil is this skimmer dead silent...meaning no humming or anything
Answer:	It’s amazing, and it’s dead silent
Question:	What puump would i use to replace a broken one
Answer:	Bubble magus 600 or stronger. Hope that helps.
Question:	Why is bigger skimmer more money or is this an error
Answer:	Hi there, thank you for your interest. It's bigger so it's equipped with a larger pump for better reaction. And it needs more acrylic raw materials. It's bigger so it costs more sea freight and final delivery fee. The bigger one overall costs more so it needs more money. Thanks.
Question:	How big is the cup
Answer:	I have the BIG one and the cup is about 4 inches tall and 7 inches across

Product features

Note please

Most of the protein skimmers are equipped with alternating current "AC" pumps (the type of power that comes out of your wall outlet). The IOAOI Direct current “DC” pumps have several key advantages over traditional AC pumps. Most notably, you can adjust the rotational speed of the motor which controls the air and water flow rates into the skimmer as required. And it converts alternating current to 24V direct current, which would be safe to you and your marine organisms.

• 【Specifications】Dimensions: 2.87*1.65*2.2inch; The 5ft long power cord offers convenient installation; An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want; Max Flow Rate: 210 GPH (800L/H), Max Lift height: up to 3.3Feet; Watt: 8W; Voltage:110-120V
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise; The device doesn't need any tools to disassemble it and is very easy to be cleaned
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features
• 【Warranty】: Super durable & reusable; Comes with 2-Year warranty; Any problems with the item you received, please contact us without hesitation

User questions & answers

Question:	Made in USA
Answer:	Made In P.R.C.
Question:	What is the clear air line for? Can i hook this up to an air pump
Answer:	The clear air line is to induce air into the water to oxygenate the water. I suppose you could have an air pump feeding air into to it but why? This pulls air into the water flow already using the venturi principle.
Question:	Do you think this would send enough cutting oil to lubricate a ridgid 300 pipe threading mechine
Answer:	If the lubricating oil is as thin or slightly more viscose than water it should work
Question:	Esta Bomba funciona a 110V
Answer:	hola , si funciona a 110v

Product features

VIVOSUN 210GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.

• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 210GPH (800L/H).

4 suction cups

4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

2 oulet adapters

Accessories:

• 0.51" water nozzle
• oxygen water noozle
• boost oxygen hose

Parameter details

Power: 8W; Voltage: 110-120V

Flow: 800L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

The Intex 3,000 GPH Above Ground Pool Sand Filter Pump w/ Auto Timer provides cool, refreshing, clear water, and less hassle every swim season. If you are tired of buying and replacing pool filter cartridges, this filter is the one for you. With virtually no maintenance, your sand pump only needs replacement every five years. This sand pump features a powerful motor, 6-function control, and a built-in automatic timer. It meets the UL standards and is an excellent upgrade to the filter cartridge system on your Intex Above Ground Swimming Pool. This filter works with pools with easy set, metal frame, and ultra frame, up to 19,600 gallons. Simple to use and easy to operate, this Intex sand filter will outperform your standard cartridge filters and keep your pool crystal clear.

• Pump flow Rate: 3000 GPH. System flow Rate: 2, 450 GPH
• 6 function control - enables pool owner to filter, backwash, rinse, recirculate, drain & close system
• 24 hour automatic timer
• The strainer basket provides easy-cleaning, and prolongs the life of the sand.
• Hydro aeration technology is incorporated into the filter pump for improved circulation and filtration, improved water clarity and increased negative ions at the water surface

User questions & answers

Question:	funciona para piscinas enterradas
Answer:	No es solo para piscinas arriba de la tierra.
Question:	Have 15' pool, what size of the pump I should get
Answer:	Pool should be cycled twice daily. Pump should be big enough to cycle the total gallon capacity twice within a few hours
Question:	I’m looking at getting the 12” model for a small 14 round pool. Does the sand filter come with sand? What size are the hose connections
Answer:	No, sand is not included but it is pretty inexpensive. The hose size is 1 1/2
Question:	Can you use this pump for a Coleman pool
Answer:	I have a 22x52 Coleman pool. Hooked right up with hoses come with it! Had it hooked up in 30 minutes or so.

Product description

3/4 horsepower, 115 volts, 60 Hz powerful dual application system: can be used as a shallow well jet pump with an electronic control or to boost water pressure. No need for a pressure switch and pressure tank. The electronic control prevents the pump from running dry. Eliminate rust and drink cleaner water with a stainless steel pump. Recommended for residential use in homes, cottages or farms. Maximum vertical lift of 25'. Built-in ejector. High performance impeller. Totally enclosed fan cooled motor, bearing to bearing, powered by a full-time run capacitor to eliminate starting wear vs regular motors. Thermal and overload protection. Large stainless steel corrosion-resistant body, easy to prime. Built for an intermittent or a continuous use. Easy to install, comes with 10-ft power cord. Maximum pressure of 65 PSI. 1" NPT suction and discharge. 0 - 100 PSI pressure gauge. Capacity at 30 PSI: 897 US GPH/5’; 749 US GPH/10’; 638 US GPH/15’; 555 US GPH/20’; 472 US GPH/25’. Not recommended for sand point applications. In a pressure boosting application, a water pressure regulator must be installed before the inlet of the pump if the source pressure exceeds 25 PSI.

User questions & answers

Question:	Pump will not kick on when facet is open
Answer:	check and make sure your incoming pressure is not higher than the pumps high shutoff psi. If so it will not turn on.
Question:	My cabin is strictly gravity flow from a 2000 gal holding tank about 150' above me. Can I use this to boost the pressure a bit
Answer:	Yes. It'll probably boost pressure to about 75 PSI. But 150' head already gives you 73 psi so it may not be worth it unless you're losing a lot of pressure from flow loss in the pipes. In that case bigger pipes would be a better solution.
Question:	Can this pump be used with an existing pressure tank? 2) Does anyone know how many watts this pump averages a day for a family of three
Answer:	This BurCam water pump can be used with a holding tank to boost your city water pressure. When used as a booster, the incoming water pressure needs to be 20 PSI or less. If it is greater than 20 PSI, a pressure reducer will be required. This pump is designed to maintain a constant pressure and will automatically shut off once the line pressure reaches 60 PSI. The pump will pull 1,725 Watts at start up and 828 Watts while running.
Question:	where can I get replacement parts for these pumps
Answer:	call Burcam in Canada Tel. 514 337 4415

Product description

SHURflo’s Pre-Pressurized Accumulator Tank smoothes water faucet pulsations and reduces pump cycling to keep water line pressure up and pump motors cool. The SHURflo® accumulator tank reduces plumbing system noise, increases the life of your pump and saves battery power. Coupler fitting is included.

• Reduces pump cycling
• Smooths water faucet pulses
• Pre-pressurized to 30 PSI with built-in diaphragm
• Refer to manufacturer recommendations and installation guidelines to ensure proper usage

User questions & answers

Question:	what is the size of this tank and what material it's made of
Answer:	The tank capacity is 21oz, or 1/6 gal.
Question:	Will this work with a seaflow 12v 4.3lpm water pump
Answer:	My boat is plumbed with braided hose. My favorite fresh water piping is PEX, but I am not planning to change at this point. The pump is a 4.5GPM 12V serving a total of four sink fixtures plus two heads and a shower. Hope this helps.
Question:	what is the maximum pressure
Answer:	You set the pressure for the TURN-ON pressure of your pump (the pressure at which the pump kicks on and starts running, usually around 30psi for a shurflo 2088 series model factory set), not the shut-off pressure (when the pump stops running, usually around 40-45psi from the factory on a shurflo 2088 series pump). If you have turned the screw (phillips or allen) on your shurflo pump and upped or lowered the turn-on pressure, then you will need to get a gauge in there and measure your new turn on pressure before installing the accumulator tank.
Question:	Hi, I just ordered a shurflo 4008 pump and wondered how this would be installed in conjunction with the pump? does the water go into this unit first
Answer:	Hi, Shelly; This accumulator needs to be installed on the pressure side of the pump. It can be connected in almost any cold water line, but best if mounted at or near the pump. Mine used the supplied adapter connecting it directly to the out-let side of the pump. Mine works great.

• Adjustable flow speed(press the “speed” button) and frequency(rotate the dial). Easy to achieve multiple sea wave with a simple controlling panel.
• Power consumption to 40 W, Max flow: 3400 GPH, Recommended for 50 inch /60-150 gallon tank.
• Low voltage 24 V DC Safe power supply. One touch feed mode.
• Strong Magnet-suction cup base makes it easy to positioning the pump in the aquarium.
• Quiet operation, ideal for marine, freshwater or tropical aquariums.

User questions & answers

Question:	can anyone post an item number or link for a foam sleeve that will fit this
Answer:	I do not know of one but mine has not had one for a long time now. It so big the intake velocity is reasonable.
Question:	Will this work/connect to an existing Jebao RW-8 powerhead
Answer:	Probably
Question:	Will 2 of these pumps be sufficeint for a 135gl sps tank
Answer:	I would think so. I bought one for my 300 gal tank and been very pleased with it. They are powerful pumps.
Question:	can I sync 2 pumps together with this system
Answer:	Don’t think so. Try to see if there’s an explanation about that

Product features

What‘s The Purpose to Have A Wavemaker?

Among the necessary equipment for an aquarium keeper, wavemaker plays a major role in creating a comfortable and healthy habitat for finned buddies and aquatic plants by making artificial waves. To have a circulation pump, it helps remove dead spots that accumulate debris as well as helps provide oxygen to the fish and invertebrates by circulating water. It also brings foods by water movement to the invertebrates which couldn’t move around to search for food. If you are in need of creating a natural-like environment for your pets and plants, wavemaker is a must-have.

3400 GPH Controllable Wavemaker

Uniclfie controllable circulation pump helps to meet variety needs in daily aquarium maintenance such as cleaning sediments and feeding pets with its all-inclusive system. The controller has 4 wave modes, 6 levels power rate and 8 pulse degrees allows you to customize the length, speed, and type of the waves. Ideal for freshwater, saltwater and reef aquarium.

Working silently

The wavemaker is powerful to make turbulant but no matter what program you settle on, this wave maker runs noiselessly.

Day&Night Mode

LIGHT MODE button was added to realize both day and night waves so that mimic a natural environment for acquatics.

One-button Feed Mode

Press the button SPEED/FEED button for about 3s until the “10min”light was on to come to 10min pause feeding.

• 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
• 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.

User questions & answers

Question:	Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water
Answer:	Yes
Question:	What size tubing should you buy to fit the .74 inch adapter
Answer:	Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc?
Question:	Where exactly is the inlet? If used as a small sump pump, how much water will be left
Answer:	The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps.
Question:	Does it have / need oil or lubricant? Would keg lube work
Answer:	no need to lube. just plug and run it in water.

Product features

VIVOSUN 800GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

3 oulet adapters

Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).

4 suction cups

The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

Parameter details

Power: 24W; Voltage: 110-120V

Flow: 3000L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

For more than 40 years, Marineland has been committed to fishkeeping success. By applying biological science, advanced engineering and imagination to fishkeeping, Marineland continues to be the leader in innovative aquatic environments & equipment. Today, that spirit of innovation is alive and well at Marineland. Whatever your passion — fresh or saltwater, big or small — count on Marineland to bring you the most reliable, the most technically advanced, the highest quality aquariums and accessories on the market. All Penguin BIO-Wheel Power Filters deliver easy, three-stage mechanical, chemical and biological aquarium filtration. Convenient Penguin Rite-Size Filter Cartridges come ready to use with each filter...ready to mechanically and chemically remove waste, discoloration and odors. Each contains new faster-acting Black Diamond Premium Activated Carbon for maximum efficiency. Biological filtration is provided by the revolutionary and patented BIO-Wheel - proven best at removing toxic ammonia and nitrite. All BIO-Wheel filters feature Noise-Reducing Two-Piece Vented Covers, and Adjustable Mid-Level Intake Strainers.

• WITH ROTATING BIO-WHEEL: Patented Bio-Wheel technology provides excellent wet/dry biological filtration.
• MULTI-STAGE FILTRATION: Delivers mechanical, chemical and biological aquarium filtration to maintain a clean aquatic environment.
• COMPATIBILITY: Use with Marineland Rite-Size Filter Cartridges (see individual filter for sizing recommendations).
• FIVE SIZES: Available in 75 GPH, 100 GPH, 150 GPH, 200 GPH and 350 GPH sizes.
• age range description: All Life Stages

User questions & answers

Question:	does the filter come with the bio wheels
Answer:	Yep. It comes with everything you need. Great hob filter!!!!
Question:	Is there somewhere to put the small biomax rings? or extra room in the filter for them? Thank you
Answer:	Yes there is. There is a big space between filters and back if filter. I have fluval ceramic rings in mine.
Question:	How much clearance between the wall and the aquarium is required
Answer:	I have 4 inches from the back of my Aquarium and the wall. There is 1 inch between the back of the Filter and the wall.
Question:	how do to maintence on 350 marine penguin power filter
Answer:	Generally good answers...these blue pads clog quickly, I like to rinse all my filters, but these really "hold" the detritus. OF course I would normally rinse filter pads in a bucket of old aquarium water DURING the water change. But tapwater is usually fine too . So, get the reusable frames they sell for 2 or 3 dollars. At least the blue pads are cheap on amazon and WM for a 6 pack.

• { RUNNING DRY & OVER-HEAT PROTECTION } This fully submersible fish tank heater maintains proper temperature for your fish in a safety way, auto shut off when over-heats, resets when it cools down. The heater will shut off when removed from the water, and resume functioning upon return
• {EASY TO READ LCD DISPLAY} Build-in external temp controller, easy to read LED digital number shows real time water temperature and set temperature. Indicator light let you know when the heater is on. It will be red when heating and green when the proper temperature has been reached
• {SHATTERPROOF CORROSION RESISTANT} Corrosion resistant, shatterproof titanium tube construct heats fast, nealy unbreakable for both saltwater and freshwater aquariums. ABS plastic protective sleeve prevents fish from being scald
• {EASY TO USE} Easy to set temperature without getting hands wet. Just keep pushing the button. It will cycle through all the set temperatures. Temperature can be precisely adjusted from 68 to 93°F (20°C ~ 34°C), electronic thermostat accurate to +/- 2 degrees Fahrenheit differences
• {FOR 120-180 GAL} 800 watt aquarium heater, voltage 110-120 Volts, heater rod 9.6 inches long, suitable for tank capacity 120-180 gallon freshwater and saltwater aquariums

User questions & answers

Question:	My heater stopped workin shows ec and er codes. is only 4 months old
Answer:	Mine did too. How did you return it? My return window closed through Amazon.
Question:	My heater screen goes black and also now it says er(error) and won't heat at all. I have not even had it 3 months yet. Can I get past the code
Answer:	Same thing happened to mine, I assumed it was from the humidity of being near my sump so I ordered a replacement. Contact their customer service they were great to work with
Question:	So how do we use it if we do have gravel on the bottom of our aquarium? Why can it not touch gravel
Answer:	You can place it horizontally or vertically as long as it is fully submerged and not touch the gravel. This is because the heat differential between the untouched portion of the heater’s glass tube and the area in contact with the substrate can stress the surface and cause micro-cracks. For this reason, make sure the heater’s surface is free and clear of all obstructions.
Question:	Only one wire length is listed at 5ft. There are two cords, one to the wall and one between the controller and heater. Are both cords 5ft
Answer:	Yes, both cords 5ft.

Product features

provides a fast and safe way to heat up and maintain proper temperature for your fish

• IP68 100% Waterproof, Fully Submersible
• Shatterproof, corrosion resistant titanium heating element
• Auto shut off when over-heats, resets when it cools down
• ABS plastic protective case prevents fish from punching and scald
• Adjustable heat setting from 70°F to 94°F
• Easy to read water temperature
• Ideal for used in 60-180 gal freshwater and saltwater aquariums

Saving Energy

The heater heats up your aquarium at full speed once it plug in. You can see MAX on the screen. When it reaches the proper temp, it stops.

Once the water temp drops 1 degree or so, the heater heats up again in low energy to keep the proper temp. You can ECO on the screen.

In this way, the heater saves energy greatly.

How to set temperature:

1. Place heater rod underwater and fix it on the wall
2. Plug in power and you can see LED digital number flashing 3 times and shows current water temperature, red indicator lights onn
3. Press set button to the desired temperature which will blinks 3 seconds and starts to heat the water
4. Once it reach desired temperature, indicator light switch to green

Attention:

1. Make sure that the heater doesn’t touch sand or gravel on the tank bottom.

2. To avoid the device overheating and insure its better performance, it’s better to put it close to the tank filter.

3. Don’t plug in the aquarium heater if it’s not completely drown into the water.

4. Unplug the heater first before water change

TROUBLESHOOTING

The screen keeps blackout

• Reason: the heater is interfered by electronic components
• Solution: contact seller to replace it

Er code

• Reason: heater rod come out of water or temp probe defective
• Solution: unplug it and take it out for 1 hour, then restart. If not working, contact seller.

Suction holder not fit

• Solution: contact seller to get a new holder