14 best game panel heaters

Product description

GAME 4721-BB SolarPRO Curve Solar Pool Heater, Made for Intex & Bestway Above-Ground and Inground Pools, Includes Intex Adapters, 2 Hoses & Clamps

• SOLAR POOL HEATER: The GAME SolarPRO Curve Solar Pool Heater has been designed for above-ground and most inground pools. It increases the pool temperature by 5 degrees in 4 days (for an 8,000-gallon pool).
• DURABLE CONSTRUCTION: We’ve designed this above-ground solar pool heater with high-quality materials that will hold up against frequent exposure to the sun and outdoor elements.
• UNIQUE CURVED SHAPE: The GAME solar pool heater has been engineered with a unique curved shape that maximizes heat collection. The treaded ports have been added for versatile plumbing options.
• ADJUSTABLE LEGS: This solar heater is compatible with Intex, Bestways, and most above and inground pools. The adjustable and foldable legs allow the heater to be set for maximum exposure to the sun, along with a clear cover that locks in heat.
• THE PERFECT GRADUAL HEATER: This solar pool heater is not intended to be a miracle-cure heater. It’s designed to extend your pool season by gradually increasing the water temperature by a few degrees. Maximum heat output with space saving footprint

User questions & answers

Question:	I have a 10,000 above ground pool would I need more than one of these
Answer:	I used it on a 10 foot diameter, 30 inch deep Intex above ground pool, one of those with the blow-up ring around the top. It would heat it up a little on a warm sunny day. My pool is probably 1,000 gallons. So yes you would need more than one. If you can control the flow of water through the panel with a valve then you could regulate it to get maximum heat by slowing down the flow.
Question:	Is having it installed for an extra fee an option? I'm a senior citizen, and not confident to hook this up by myself
Answer:	As long as you can bend over for a short time, you can handle it! I'm 54 (almost senior), but have a spine injury with a great deal of nerve damage. I was able to install alone. Just make sure you have the suggested lube to get the tubing into the unit, or you won't be able to get it in. That makes it a breeze! Good luck!
Question:	Will this work on my dough boy pool
Answer:	It should. Depends on how much sun etc your yard gets. We have an above ground pool (18 ft around) and normally temps are in the high 60s ( like 68-70) when we open the pool and we freeze when we get in or can't swim at all till mid June. We installed one of these and it's been a big help with raising temps. our yard is semi sunny and our temps have jumped up to 83 in our pool.
Question:	I have 2 conected ro a 1.5hp motor and am not getting much if any heat thru the 2 heaters at all i have it setup just as the directions show
Answer:	How long do you run them? We are in Wyoming. Warm days, cool nights. We run ours from 9 am until about 5 pm. The heater is in the sun the entire time. Our pool, 18 foot round, 4 foot deep, gets to 100 in July. Now with cooler nights and daytime temps, it is at about 90.

Product features

Solar Pool Heater

The GAME SolarPRO Curve Solar Pool Heater has been designed for above-ground and most in-ground pools. It increases the pool temperature by 5 degrees Fahrenheit in 4 days (for an 8,000-gallon pool).

Durable Construction

We’ve designed this above-ground solar pool heater with high-quality materials that will hold up against frequent exposure to the sun and outdoor elements.

Adjustable Legs

This solar heater is compatible with Intex, Bestways, and most above and in-ground pools. The adjustable and foldable legs allow the heater to be set for maximum exposure to the sun, along with a clear cover that locks in heat.

Unique Curved Shape

The GAME solar pool heater has been engineered with a unique curved shape that maximizes heat collection. The treaded ports have been added for versatile plumbing options.

• QUALITY ASSURANCE: Manufactured from high-grade materials proven to last in all types of weather and withstand the harsh conditions of a rooftop for up to 15-20 years. Each panel is put up against more than 40 quality control inspections throughout the entire manufacturing process to ensure the final product.
• HIGHEST PERFORMING DESIGN: Constructed in a tube-and-web design which allows for normal expansion and contraction as the panel heats and cools, extending service life. A direct, metered manifold delivers a balanced flow through the collector and prevents hot-spots. These panels MUST be installed vertically for optimal performance and drainage.
• SUPERIOR MANUFACTURING: Made from precompounded polypropylene, a process which increases the materials resistance to UV light (lengthens service life substantially). This manufacturing process eliminates the inherent quality issues that plague cheaply manufactured products which typically see a lifespan of only 1-2 years.
• SATISFACTION GUARANTEED: Each panel is guaranteed to be free from manufacturer defects, withstand the effects of freezing weather and will not fail from corrosion or scale deposits in the walls of its water passages (5-year full / 10-year limited).
• UNIVERSAL COMPATIBILITY: Replaces any solar pool heater panel containing a round 2" I.D. / 2.375" O.D. header manifold and makes attachments with a rubber coupling.

Product features

LISTING DETAILS

WHAT'S INCLUDED

This listing is for a single solar panel only (no hardware included).

• If you'd like to order your panel WITH hardware - search Amazon for ASIN: B08D1YZVHD

NEED MULTIPLE PANELS OR A COMPLETE SYSTEM?

• [2-Pack] Solar Panels - search Amazon for ASIN: B08D1MLGMK
• D.I.Y. System Kits (multitude of sizing options available / includes installation hardware) - search Amazon for ASIN: B08CRG1KHT

HOW MANY PANELS DO I NEED?

The most relevant aspect of sizing a solar pool heating system is based on the square footage of your swimming pool. We typically recommend matching anywhere from 50%-100% of your pools total surface area to solar collector coverage (square footage of solar panels). *For example, if your pool is 500 square feet, then 50% solar coverage equals 250 square feet of solar panels, 75% solar coverage equals 375 square feet of solar panels, etc. From this point, you'll want to look at selecting a panel size that fits your installation area.

Product description

Bypass Kit for Multiple Solar Heater Panels Use with Game SolarPro Heaters

User questions & answers

Question:	Is this for 1½ or 1¼ hoses
Answer:	1 and 1/2
Question:	How many panels does this work for? Im trying to link 4 together
Answer:	I haven't set up mine, but I think it's only for the panels , you will need one more bypass

Product description

Inground / Above Ground Swimming Pool Solar Panel Heating System 28" X 20'

• XtremepowerUS Panels are built from extremely high-grade materials that are proven to last in all types of weather
• Pools pump and filter system circulates pool water through the SOLAR PANELS when it is heated & then returned to your pool. Once installed, these panels are cost effective, produce no greenhouse gases, and need low to no maintenance. Extend your swimming this year at a low cost with the help from the sun!
• System is designed to be used on above-ground or in-ground pools. Each kit is made of - 2' x 20'ft panels. Each panel is made of lightweight, flexible, durable black polypropylene. The panel tube construction creates a larger surface area which optimizes heat transfer from the sun to your pool
• Quantity of these solar panels needed is dependent on the pool size and the location, which may estimate by some websites.
• Diverter kit may be required for pumps 1.5hp and greater. Sold separately under item number B01FNE41HA

User questions & answers

Question:	Are these panels expandable
Answer:	yes of course, everything you need there at Home Depotbest gds hans
Question:	I am using a low flow solar pump. I think I should remove the baffle and block the flow between sections so water flows up onside and down the other
Answer:	That is exactly what I did. I plugged the hole in the baffle disc and diverted the water into two sections at a time. So I have a total of ten sections and the water travels up two, then back two, then backup two, until it exits. My pump is a 6 gpm solar pump and it works fine.
Question:	How many panels do you receive? Picture shows
Answer:	You receive 2 panels, each with 2 sections, so 4 ribbons. I say this because if this is at an angle it will sag. I squeeze it between 2 boards at various points because I have it at an angle on a rig above the ground.
Question:	How many HP does your pump have to be for this solar heater
Answer:	I used two of these on my 10,000 gallon pool. I did not use my 1hp pool pump ( I did not want to run it for 8 hours a day). I set up a small 250 GPH utility pump to circulate water. I run it for 8 hours a day at a cost of about 15 cents a day. The incoming temp was about 75- outgoing about 100. It resulted in a raise of total pool temp of about 8 degrees. The HP of the circulating pump does not make a difference. Only a set amount of Sun energy can be transferred to the water based on the sq. footage of the panels, amount of sun and hours per day of circulation. The HP or GPH will not make a difference as long as you are circulating water through the panel.

Product description

Smart pool Sun Heater High Density 4'x20' (80 sq. ft.) Solar Heater for In Ground Pools can be mounted on roof. Do not clamp header pipes down

• Keep your pool warm with a polypropylene heat collector. Direct Flow System - One Header Hole for Each Heating Tube
• Solar heater features 80 square feet of solar panels
• Pool accessory is perfect for heating any in-ground swimming pool
• Panel array measures 4 feet wide x 20 feet long. Raises Pool Water Temperature 6-10°F (4-6°C)
• Installation kit required (Sold Separately)

User questions & answers

Question:	How do i properly adjust valves to get best operation of these panels
Answer:	I just connected system to discharge line (2") to pool as source and then returned to same discharge line as return from sun exposure. Also included a 1/2" pipe at top of return end of system with a valve on it to allow for release of air which in fact takes time to push through.
Question:	If a leak forms can it be patched?? If so what is needed
Answer:	Depends on where the leak is. If it is in a tube yes. The mfg has a kit I believe.
Question:	Is this for in-ground or above-ground pools? The item title says in-ground but the box in the photo says above-ground. (My pool is above-ground
Answer:	I use it for an in ground pool and works perfect. It will also work for an above ground pool if you have the proper piping.All it does is, that the same pool pump you have runs the water through the panels before going back into the pool
Question:	I have a 12.5' x 22' inground pool and i live in florida. any idea of how many boxes i should order? thanks
Answer:	I would not go with less than 4 panels. You should base the number of panels on the sf of your pools surface and the amount of sun the panels will receive. I recall reading somewhere that the surface of the panels should be no less than 60% of your pool surface if you want to gain any advantage by using solar. On a pool your size, with the panels in the sun, in Florida, four panels would give you a long swimming season. While I'm too cheap to use an automatic temperature valve for the panels, you may want to consider it. I believe building code requires some sort of safety device that will prevent scalding. I learned the hard way that if you turn the panels on late in the day that water coming out of your supply line will be hotter than McDonalds coffee. I live in SW Florida.

Product description

Manufactured by the premier company in the solar business (they have installed over 125000 solar systems), these panels have been efficiently heating swimming pools since 1972. Solar Bear's surface is fully whetted by pool water insuring the most efficient panel available. Extra large 2-inch headers do not slow down your pool's circulation and ensure excellent solar heat transfer to your pool's water. Smaller 1-1/2-inch headers can reduce your pool's circulation and cause solar heating to be compromised. Solar Bear systems are comprised of a single extra-large 4-feet by 20-feet collector with no couplings or connectors. The system is made of U.V. stabilized polyethylene that is very tough and will last many seasons under direct sunlight. The systems come complete with an integral bypass valve, so you can turn them on and off as needed. Solar Bear panels can be mounted on the ground, on a rack, or a nearby roof. Complete installation and user's manuals are included. 10-Year Warranty. Put solar to work in your pool and swim in a warmer pool without the huge expense of heating it. Note: For panels to heat optimally, they must receive unobstructed sunlight between 10 a.m. and 4 p.m.

• Package includes 4' x 20' Wide Solar Collector with 1-1/2" barb connections, 12 mounting caps, 12 mounting bases, 6 mounting straps, 1 valve handle and 20 rubber tube plugs
• Pool pump circulates pool water through the heated solar collector
• Optimal heating with unobstructed sunlight between 10am and 4pm. Performs most effectively when tilted 10 to 30 degrees to the South
• Mount on the ground, on a rack, or nearby roof
• Additional materials required: 1-1/2" I.D. flexible hose and ground spikes (ground installation)

User questions & answers

Question:	Will this work on 17000 gallon pool
Answer:	I believe so- we have a 15 foot by 30 foot oval pool and I think that is 15,000 or 17,000 gallons of water. We have had our solar cover since last summer and we are very happy with it. It is a good quality cover.
Question:	Is this kit for above-ground or in-ground pools? Ours is in-ground
Answer:	It works for both in-ground and above-ground pools. You connect it to the pool pump so you will need a diversion valve.
Question:	Has anybody use this for an inground pool? And how did it work
Answer:	I have not used this for an inground pool, but the pool type should not matter. As water is moves through the panel, it picks up a little heat on each pass. The amount of heat is determined by the number of panels. The only difference between inground and above ground pools that would be an issue is heat loss, which would depend on your environment and pool materials.
Question:	How many gallons of water does the 4 ft x 20 ft panel itself hold
Answer:	Don't know but it isn't much as heating tubes so small. Never seems to be too much water that drains out when I put away for winter

Product description

A Natural Way to Warm Your Pool! Enjoy blissful, worry-free warmth with this solar heater from FlowXtreme. Its innovative, flat-panel design outperforms solar domes, increasing heating capacity by 40% per cycle. This high-powered heater captures sunlight and magnifies it. As your water flows through this heater's solar coils, natural warmth heats it up. The result is warmer water and a longer swimming season. This unit features easy, do-it-yourself installation with everything needed to get up and running in minutes. It easily connects with standard, 1.25 - 1.5-in attachments. Simply connect to your filter & pump system and enjoy simple, natural warmth. Each FX Flat Panel comes complete with an adapter for soft sided pools, two installation hoses, and collapsible base legs for easy mobility and adjustment if needed. Connect multiple units to generate more heat in less time (requires bypass kit, sold separately). 1-year limited warranty.

• State-of-the-art - an innovative, flat-panel structure lowers the amount of time it takes to heat your pool. This new design increases heating capacity by 40% per cycle.
• Easy to install - standard, 1.25 - 1.5-in fittings provide compatibility with most above ground pools. Simply attach to your filter & pump system and let the warm water flow!
• POWERED BY SUNLIGHT - The FlowXtreme Solar Dome Heater uses nature's most powerful source of warmth. Solar rays are magnified within the streamlined housing, heating up your pool water.
• 1 Year Warranty - your product comes with a one Year manufacturer Warranty. Your item will arrive damage free with all necessary parts and accessories.
• Dimensions: 41.4-in L x 28.8-In w x 20.5-in H. Ignition Type-No Ignition System

User questions & answers

Question:	How do you get these to stop leaking? Why cant they fix the problem? After all we can rocket to the moon
Answer:	The items surface is dark in color, thus absorbing sun/heat readily. I would not recommend sitting on it with bare skin. I would not recommend touching it for more than a few seconds with bare skin if a hot day in direct sunlight. It will be hot. Not warm. Hot.
Question:	Can this be used for inground pools
Answer:	There is a bypass switch if you wish to stop the water flowing through the mat at any time.
Question:	Does it heat 1600 gallons of water
Answer:	You need a certain amount. I got 1 then realized my 15 ft pool needed 4. That being said, I could feel the warmer water coming in the pool with one. Worked well. Regardless of persons response before. Maybe they set it up incorrectly. However, it's plastic and pops and if that happens your pool will drain. Also intex customer service should be reported to BBB for lack of handling complaints.
Question:	Can 2 panels be combined
Answer:	Not a lot, made a few degrees difference in pool temp. Going to use another type next year. I'd say a little over a gallon. Kimberly M.

Product features

Flat-Panel Pool Solar Heater

Enjoy blissful warmth with this solar heater from FlowXtreme. Its innovative, flat-panel design outperforms solar domes, increasing heating capacity by 40% per cycle. This high-powered heater captures sunlight and magnifies it. As your water flows through this heater's solar coils, natural warmth heats it up. The result is warmer water and a longer swimming season. This unit features easy, do-it-yourself installation with everything needed to get up and running in minutes. It easily connects with standard, 1.25 - 1.5-in attachments. Simply connect to your filter & pump system and enjoy simple, natural warmth. Each FX Flat Panel comes complete with an adapter for soft sided pools, two installation hoses, and collapsible base legs for easy mobility and adjustment if needed.

Product description

SolarPRO Multiple Heater Bypass Kit - for use only with GAME SolarPRO Heaters. Required for connecting 2 or more SolarPRO Heaters.

• Multiple Heater Bypass Kit Is Required For Connecting Two Or More Solarpro Pool Heaters By Game
• Also Required For A Single Swimming Pool Heater If Your Pool Pump Is 1.5 Horsepower Or Greater
• Can Be Used For Above Ground Or In-Ground Pools
• Only Compatible With Game Solarpro Heaters

User questions & answers

Question:	Why is a special multiple heater kit neeed for multiple domes? Dont you just link the two domes together and use the standard diverter kit
Answer:	so you don't have to run the heater all the time, I use it to slow the water flow down to get more heat in the water
Question:	Is a bypass necessary if only using 1 solar heater
Answer:	My pool service installed a by pass valve to shut the heater on and off and so the pressure did not grt too high and blow the hose off
Question:	how do I turn the bypass valve so I can use the heaters? directions are unclear, do i need to remove the screws or the pin
Answer:	Just turn the knob on the valve. When you have it right, you can feel the water run through the heater coils.
Question:	what diameter hoses are needed/will work for this kit
Answer:	Connectors will fit 1 ¼” 1 ½” 32mm & 40mm hoses and 2” PVC plumbing. If you have additional questions please contact us here at GAME at 1-888-339-2546 EXT 135. Thank you

Product description

The Dr. Infrared Heater's Advanced Dual Heating System, combining PTC and Quartz Infrared Element, keeps you warm this winter while saving on heating bills. Equipped with a Dual Heating System and High Velocity Low Noise blower, the Dr. Infrared Heater increases the heat distribution and the result is heating your room to a comfortable temperature, fast. The Dr. Infrared Heater is certified by Underwriters Laboratories (UL) USA and Canada, ensuring the highest safety standard. The Dr. Infrared Heater is perfectly safe around children and pets and only gets warm to the touch. It does not have exposed heating elements that can cause a fire. The Dr. Infrared Heater comes with Energy saving Auto Mode, high and low setting when the mode is set to Auto, the unit will cycle on and off and switch between high or low setting to maintain the desired temperature setting. All Dr. Infrared heaters are engineered and designed in the USA. How is Dr. Heater Different from Other Heaters? Dr. Heater uses infrared heating, which heats objects in the room, instantly making you feel comfortably warm. By heating only the objects in the space--not the air--Dr. Heater provides maximum warmth and energy efficiency. With its state-of-the-art technology that helps the room retain air moisture, Dr. Heater do not dry out your skin like those convection heaters that blast out hot air, stripping the room of moisture. And the best part? It will save you money. Use Dr. Heater instead of your regular heating system, and you could save up to 50% on your next electricity bill. Plus, with its tip-over protection and auto shut-off overheat protection, you can sleep soundly knowing you have got a heater that is superior in safety. Tests Show Dr. Heater heats Faster and Better than Competing Heaters. In a side-by-side test comparison in airtight chambers with the same starting temperature, Dr. Heater heated the same amount of space much faster than a competing heater that has a price tag more than double that of Dr. Heater. Dr. Heater Delivers 60% more heat than other 1500-watt heaters. No magic trick--we just understand heat transfer better. Just because two heaters have the same wattage does not mean they transfer the same amount of heat. Wattage indicates the amount of electricity needed to power the heater--not the amount of heat it can deliver. Heater is the first to feature a dual heating system for maximum heat transfer rate. It combines the energy efficiency of infrared heat with the comfort of convection heat to heat your room fast and comfortably--without hot spots and cold spots. Dr. Heater uses a state-of-the-art 7-inch blower that generates higher pressure and moves larger air volume at a lower speed, without any of the noise of those other heaters on the market. Dr. Infrared Heater has three power Settings: Auto, Low 1000W and High 1500W. The auto energy saving mode allows you to set your desired temperature from 50-86F. It smartly selects between the two settings depending on your room temperature. The thermostat regulates the heater and causes it to cycle on and off to maintain the set temperature. You can also manually set the heater to run on High or Low all the time or with a timer. The heater has to be turned on first in order to use the remote. This a safety provision mandated by the Underwriters Laboratory. So, in order to use the remote, the first step for the user is to press the POWER button on the heater itself. This turns the heater on STANDBY. Then, pressing the POWER button on the remote will turn the heater on. The heater can't be turned on if the unit is not on STANDBY.

• Can heat up a large room with Auto Energy Saving Model With High and Low Feature. Tip-over protection and Overheat protection
• Dual Heating Systems featuring infrared quartz tube + PTC with 12hr automatic shut-off timer
• IR Remote Control, High Pressure Low Noise Blower with Noise level 39 dB super quiet. Heating can cover for a large room.
• Electronic Thermostat: range 50 to 85 degrees. Caster Wheels and lifetme filter
• Weights 24 lbs and uses 12.5 Amps of Power. 1500 Watts.Electric Cord 72 inch long
• Voltage: 120 Volts
• Power source type: Corded Electric

Product features

CONTROL AT A DISTANCE

Change the temperature, turn it off, or even program your heater settings without having to get up from already cozy, tucked-in position.

PROGRAMMABLE TIMER

Set up to a 12 hour timer that automatically shuts off when it reaches the number of hours you have programmed.

SOOTHINGLY QUIET

This blower is so quiet, you’ll hardly notice it’s on. The state-of-the-art 7 inch blower generates high pressure which allows it to move large volumes of air at a lower speed.

SAVE BIG ON YOUR HEATING BILLS

Dr. Infrared Heater works in a similar way as sunlight, by warming objects rather than air. The infrared heat feels natural and is energy efficient using 100 percent of the heat produced, which creates almost no loss in heat transfer at a low cost.

Easy to Maintain

Our heater is made to last you though many winters, therefore it comes equipped with a removable filter that is easy to clean and replace, allowing for a fresh start every time it’s needed.

More Heat then other 1,500-watt heater

Wattage indicates the amount of electricity needed to power the heater--not the amount of heat it can deliver.Dr.Infrared Heater’s advanced heating system enables greater heat production without using any more power with a high-efficiency blower that delivers an average of 250°F at 3.5m/s to your room versus competing heaters that can do only 155°F at 2.2m/s.

Product description

If you are tired of a cold swimming pool, then this solar heater is for you. our solar swimming pool heater is designed to heat pool in a green and saving energy way, Add weeks to your swimming season & swim in a warmer pool during the season. Solar energy is magnified like the green house effect through the clear lens of the heater and captured by black coiled hoses that carry pool water. The solar heated pool water is circulated back to your pool by your own pump & filter system. Do not hesitate to buy one!



Specifications

color: black

material: PP, PC and PE hose

product size: 22.5"x22.5"x8.5"(LXWXH)

product weight: 11.2lbs

length of long hose: 38.6"

length of short hose: 14.5"

package include: 1 x Solar Dome Swimming Pool Water Heater

• ☀️ Heat your pool in the environmentally friendly way, No electricity or gas connections
• ☀️ Extend your swimming season with warm water and heat your pool to a warm, comfortable temperature
• ☀️ Space saving and aesthetically pleasing when compared to solar panels
• ☀️ A protective cover is included to protect the dome when not in use
• ☀️ Solar powered swimming pool heater, Connects to 1.5 inch hoses

User questions & answers

Question:	Can you provide a link to the manual so we can download it in advance of the product arrival so that we can prepare the connecting hoses
Answer:	I do not have the manuals but here is the answer to connecting the hoses. The connection is for 1 1/2 hoses. Do NOT use the hoses that come with the dome no matter what.
Question:	Can you connect to and above ground intel pool with a sand filter
Answer:	Yes
Question:	Can these be installed on a garage roof, above the water level
Answer:	The hoses that come with it aren't long enough, and your filter pump probably isn't strong enough to pump the water up to roof level. IIRC, it does recommend not putting it higher than the water level.
Question:	Will this work with a Coleman above ground pool or do I need to get adapters to make I think work
Answer:	I went to 2 pool stores and 2 home improvement stores and none of the could sell me anything that would fit.

Product description

A Sun Heater solar heating system is the , cost effective way to warm your pool. Capture free heat from the sun's rays to raise your water temperature 6-10 degrees F! Can add weeks to you pool season. Universal system is suitable for both in ground or above ground pools.

MADE IN USA

• Simple DIY installation; for in ground or above ground pools
• Installs on roof, rack, ground or fence
• Patented web design for maximum exposure to sun's rays
• Uses existing pool pump
• Raises pool water temperature 6-10 degrees F
• Power Source Type: Manual
• MADE IN USA

User questions & answers

Question:	What size are the hose connections
Answer:	It can hook up to 1.25 intex or 1.5 hose. You need gaskets though.
Question:	How would this work for heating my 40 gal hot water heater
Answer:	I'm presently heating 60 gallons. Keep in mind it only heats as long as is on the unit. You will need a pump to circulate the water and dual shut off valves to isolate the water while it is heating. I heat a jacuzzi with mine and in the peak of summer I got over 120° incoming water. Good luck.
Question:	Can you connect several of them together easily
Answer:	Yes, it has a connection hose and clamps with each one to tie one, two or more together. Hint: make sure you silicone the caps and threaded fittings. I did even with the Teflon Tape to insure no leaks. Work great.
Question:	Doe it work with a sand filter
Answer:	Yes it works with a sand filter. It also works with salt water systems. I installed mine downstream from the filter on the inlet line to the pool and before the chlorine generator. I would not install it upstream from the pump and filter because you don't want any debris that gets past the skimmer to get into the heater to potentially cause blockages. It doesn't have to be before the chlorine generator either, that's just how mine worked out.
Question:	What is included
Answer:	Included are mounts for concrete (looks difficult) and mount for ladder, that was a snap. Almost returned, test button not too loud, but my wife set it off packaging it, service level is adequate for alarm. Not insane, but you can hear it inside.
Question:	do you think it is sensitive enough for a 15 pound dog? Also, do you think it would work with the pool thermal blanket on
Answer:	As to the 15 pound dog, yes if properly set and tested. The sensitivity changes according to how high or low from the water surface the sensor is. As to a thermal blanket, I have no idea.
Question:	Can this be used in an above ground pool
Answer:	Don't see why not, it attached to our ladder to our inground pool but should work for you as long as you have something similar to attach it to.
Question:	does this unit require additional hardware etc for this unit to work or is it all included? also what type of electricity is required to the unit
Answer:	It's battery powered and it comes with all hardware. It screws to the pool deck, in my case I had to have a masonry drill bit
Question:	Can this detect motion from a dog that weighs 10 pounds
Answer:	Depends on how close to the alarm set dog falls in, if it doesn’t cause a wave enough to move the floating cone then it won’t sound the alarm
Question:	How come this doesn’t work in polls below the ground
Answer:	It just doesn’t work. Don’t buy us unless you have an Indoor pool because a slight breeze will sound the alarm
Question:	Not to many details provided on amazon...is this alarm simple to turn off when maintaining/ cleaning pool? Also, any indication when battery is dead
Answer:	No
Question:	is there an alarm that hooks to ladder
Answer:	No
Question:	Does this work with an above-ground pool liner? Would the alarm go off at any movement of the liner
Answer:	Ours is in an above-ground pool. You have to place it so it’s not in line with the filter output. It works well.
Question:	Can this be used in in ground pools
Answer:	No this is designed for above ground pools only. Try the Pooleye PE23
Question:	Will this alert you to a 6 pound dog falling in
Answer:	Sadly I doubt it would- I believe it had to be like 19-25 pounds to sound the alarm. Can you install a gate? This is scary for you… I wish Good luck with your dog!!
Question:	How does it connect to the alarm in the house
Answer:	It connects through wifi to another transmitter you charge in house. It's really loud regardless. You won't miss the alarm.
Question:	does it have to be tethered ,or can it float free
Answer:	it comes with a long tether that can be easily shortened without cutting it, but you could let it float around without it. If it is free floating be sure it is alarming properly. Its alarm sensitivity is also very adjustable. Note: rain will also likely set it off.
Question:	Will it work if a small, 8-pound dog falls in
Answer:	I believe it will work. Our cats, 10# and 11# both fell in and it went off. Also, my husband forgot it was in and just dangled his feet and it went off. We have been really pleased with it.
Question:	What is included
Answer:	Included are mounts for concrete (looks difficult) and mount for ladder, that was a snap. Almost returned, test button not too loud, but my wife set it off packaging it, service level is adequate for alarm. Not insane, but you can hear it inside.
Question:	do you think it is sensitive enough for a 15 pound dog? Also, do you think it would work with the pool thermal blanket on
Answer:	As to the 15 pound dog, yes if properly set and tested. The sensitivity changes according to how high or low from the water surface the sensor is. As to a thermal blanket, I have no idea.
Question:	Can this be used in an above ground pool
Answer:	Don't see why not, it attached to our ladder to our inground pool but should work for you as long as you have something similar to attach it to.
Question:	does this unit require additional hardware etc for this unit to work or is it all included? also what type of electricity is required to the unit
Answer:	It's battery powered and it comes with all hardware. It screws to the pool deck, in my case I had to have a masonry drill bit

Product features

Sensitivity Adustment

Turning the black flotation base clockwise or counterclockwise raises or lowers the sensing ring with respect to the water. stops. Do not force it. This is the most sensitive position and the position that was used to pass ASTM testing. Moving the float from this position will no longer meet ASTM requirements The closer the sensing ring is to the water, the more sensitive the alarm. Turn the black flotation base gently clockwise until it.

Sensitivity Marks

The “Sensitivity Marks” can be used as a general indicator for the sensitivity position. Should the sensitivity need to be adjusted start making adjustments by turning the float only a ¼ turn at a time. Test the alarm after each adjustment. We do not recommend turning the float out more than three full turns.

Alarm Placement for pools 20x40 ft or smaller

One pool alarm can be used for all pool types. This includes aboveground, in-ground, inflatable and soft side pools.

Alarm Placement for pools larger then 20x40 ft

It is recommended that more than one alarm should be used in pools larger than 20x40 ft.

RECEIVER

Your receiver works with the pool alarm allowing you to monitor your pool from within your house. When the floating alarm is activated it sends a signal to activate the receiver.

Transmission Modes

The receiver has two modes of operation: Serial Number mode (SN mode) and ID mode. When the receiver is in SN mode it will accept the transmission of any Pool Patrol transmitter (this is the default setting). The serial number is common to all transmitters. When the receiver is in ID mode it will accept the serial number plus the ID number of the transmission. The ID number is unique to each transmitter.

RECEIVER PLACEMENT

It is best to place the receiver next to a window or wood door adjacent to the pool with-in 200 feet from the transmitter. Do not place the receiver near steel walls, cabinets, on or alongside an electrical appliance, such as a computer, or on a metal surface as this may affect signal reception. The pool alarm will not transmit its signal through the ground.

• SMALL HEATER MEASURES: 6.2" X 4.74" x 8.3" . Manual controls. Fully Assembled. Carrying handle for easy transport. Adjustable thermostat for comfortable warmth—ideal for home or office
• THREE MODES HEATER WITH FAN: 1.High Heat (1500-watt), 2. Low Heat(750-watt ), 3. Fan Only. Power indicator light lets you know when it’s plugged in
• CERAMIC HEATER ELEMENTS: Ceramic space heaters are fast to heat, produce abundant heat without open coils, and are long lasting
• SPACE HEATER WITH THERMOSTAT :The thermostat system can according to the thermostat setting let your room remain at a comfortable temperature.This heater can be used in small area (such as warming your feet),meanwhile warms up your surroundings
• FOR SAFETY: 1.Automatic overheat system will shuts the unit off when the parts of the heater overheat. 2.TIP-OVER SWITCH will shut off unite when tipped forward or backward.3. Power indicate light can lets you know at a glance that it’s plugged in. 4.ETL certified

User questions & answers

Question:	What us the chord length
Answer:	About 5ft
Question:	Where are battery operated heaters for home
Answer:	Buy a Tesla power-wall, plug a heater into it. It'll run for 20 hours on a charge and it only costs you $13,000 to buy and have the battery installed, and about $200 a month to recharge it with enough power to run it for another 20 hours. Or, just buy one of these and pay only $100 a month to run it full blast, off wall power.
Question:	I have a tower heater that I can set a timer for it to turn off after a certain amount of time. Does this have that feature
Answer:	Robert has the same setup I do. Build-in timers on a heater actually limit its usefulness unless you can bypass the timer when suitable. I have a heater with a build-in timer (my first-ever heater) and I no longer use it except in very limited situations. This heater is fantastic as its thermostat is very useful and easy. This system is in my greenhouse as a back-up if my other system fails and the temps drop below 40F.
Question:	How do I set the thermostat
Answer:	Turn the dial on the top of it. Usually once the room is warm enough I turn it back until it shuts off.

Product features

Portable Size

Product size is 6.2x4.74x8.3 inch, Net Weight is 2.42lbs

Tip-over Protection

This ceramic space heater is fitted with a safety device (tip-over switch situated on the bottom left of the appliance) that disconnects it when it is tilted or tipped.

Warmth Where You Need It

This ceramic heater is a portable heater with the handle. Its mini size makes it easy to place in any room.

ETL certification

ETL certification, reliable, safe, and focus on quality.

Product description

Extend your swimming season with the Kokido Keops Solar Dome Above Ground Pool Water Heater. Swimming doesn't have to end because summer is over, this cost effective, environmentally friendly pool heater works by connecting between your filter pump and pool return. It is compatible with most above ground pools and includes 4 foot hoses, fittings, and stainless steel clamps. This heater dramatically reduces pool heating costs and has an integrated rack that helps set up an optimal angle for the heater to receive maximum sun exposure. You can attach additional heaters for larger swimming pools. With this Kokido Keops Solar Dome Above Ground Pool Water Heater, you can just keep swimming, just keep swimming, just keep swimming.

• Don't let summer's end keep you from swimming, this Kokido Keops Solar Dome Above Ground Pool Water Heater lets you swim on into the cooler months of the year
• Extend your swimming season with warm water and heat your pool to a warm, comfortable temperature
• Environmentally friendly heating energy
• Dramatically reduces or eliminates pool heating costs compared with gas or electrical heater
• Includes a protective cover for storage purpose when not in use

User questions & answers

Question:	What is the diameter of the solar heater hose? I need to connect it directly to a garden hose, using adaptors
Answer:	11/2
Question:	Could I use this to heat a small greenhouse
Answer:	Yes you could. You'd have to devise the system to suit your needs though. Pump water from ten 55 gallon drums of water, though the solar collector and back, would heat up those drums all day. At night, the heat would radiate out and that bank of energy you store in the day might be what you require at night. But nobody knows your needs like you do, so you would decide. I just threw out one idea...
Question:	Dumb question but I guess you have to run your filter a lot for this to work? Intex doesn't recommend running the filter while you are in the pool
Answer:	I live in Connecticut. At the beginning of the season I ran it all day. You are probably right the more you run it in daylight the more heat it generates. I did not need it mid or late summer. I was happy with it, a few more degrees warmer in the pool is a lot more comfortable.
Question:	Does it come with a pump? If not, what kind of pump is recomendd
Answer:	This does not come with a pump. It is a passive solar collector and needs to be set up in conjunction with your existing pool pump or a dedicated circulator pump.