9 best automatic pool vacuums

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Product description

Equipped with patented SmartDrive technology, the Wanda the Whale Cleaner from Hayward is designed to automatically clean the bottom of all sizes and shapes of above-ground and on-ground pools quickly and completely—making sure no debris is left behind. It operates separately from your pool’s filtration system and connects directly to your skimmer, installing in less than 10 minutes without tools. A unique turbine system helps Wanda the Whale move gently across the bottom of your pool, providing exceptionally quiet performance while improving circulation by pulling water up from the bottom of the pool as it moves. A deluxe bumper ring reduces friction, guiding it away from walls, steps and ladders to continue the cleaning cycle until the job is done.

• The Wanda the Whale Cleaner from Hayward is designed to automatically clean the bottom of all sizes and shapes of above-ground and on-ground pools
• Patented SmartDrive programmed steering system ensures quick and thorough cleaning
• Unique turbine/gearing system provides constant balanced water flow assuring quiet operation and gentle movement across the pool bottom
• Connects directly to the pool skimmer and installs in less than 10 minutes without tools (includes 32 feet of hose)
• Deluxe bumper ring reduces friction, guiding the cleaner away from walls, steps and ladders to continue the cleaning cycle

User questions & answers

Question:	We have a Kayak 12 x 24 pool with 4 feet shallow end 5 feet deep end. Will this cleaner be able to go back and forth from shallow to deep end
Answer:	It goes on your return, unscrew and remove the ball. And add this flow director.
Question:	Will this work for an oval pool? 28×16 with wedding cake step ladder installed
Answer:	Yes. It comes with about 30' of hose that comes in 3' sections that snap together. My experience with this snap-together hose is that it allows quite a bit of air in the pump no matter how tight the pieces are put together.
Question:	Anybody know where yo buy an adapter to screw onto intex pool fitting
Answer:	Not sure that's strong enough. We got a 4500 gph sand filter pump and it works awesome with that. It did not work with the pump that came with the pool.
Question:	We just ordered new shoes for Wanda but while installing we noticed that two springs were missing. Where can I get replacement springs
Answer:	Yes, universal hose is available. There are 3 colors to pick from. If you have any other questions you can also call 800-950-2210. FamilyPoolFun

Product features

Above Ground Pool Cleaners

The Hayward family of above-ground pool cleaners is designed to clean the bottom of all sizes and shapes of above-ground/on-ground pools automatically. These attractive little fellows operate off the pool's existing filtration system and feature our exclusive SmartDrive program steering, so it won't miss a spot. Performance, price and stimulating 4-color cartons are sure to make this your favorite pool purchase of the summer.

Put away your manual for good

Hayward’s family of above ground cleaners provides you with easy, trouble-free operation. It works with your existing filtration system, and everything for simple, 10-minute-or-less installation is included – even the hoses. Not only will vacuuming be easier, but faster too. Every cleaner in the family utilizes patented SmartDrive programmed steering to clean faster and more thoroughly than random cleaners. Each improves water circulation by pulling water from the bottom of your pool as it moves, which helps your pool stays cleaner. Our family of superior quality cleaners is designed to keep your pool at its sparkling best, without the drudgery of manual cleaning. And it’s from Hayward, the company that engineered automatic pool cleaning technology.

A cleaner for everyone

Adults and kids alike love Hayward’s family of above ground cleaners. If it is luck that you need, then AquaBug is for you. This ladybug designed cleaner will fly across the bottom of your pool, seamlessly cleaning every inch of the floor. If deep water discovery peaks your interest, then Diver Dave is your guy. He can travel to the deep depths of your pool, crawling along the bottom and picking up all of the debris that has drifted down. Wanda the Whale completes this happy family. If you are looking for fun and cute ocean life to entertain your pool and your kids, Wanda is definitely the cleaner for you. A member of this family is waiting to join yours, so stop waiting and bring one home today!

Product description

The G3 allows you to clean your pool effortlessly and quietly, unlike some other automatic pool cleaners that make an annoying hammer noise. Tested in some of the world's toughest pools, the G3 performs like no other, with it's Wheel Deflector and Anti-Stick Design ensuring optimal pool coverage while operating. The G3 can be used on Vinyl, Fiberglass, Tile, or Gunite Pool Surfaces.

Features:

• Anti-stick design and wheel deflector ensures optimal pool coverage and allows navigation around steps, ladders, and corners.
• Finned Disc - Ensures maximum adhesion on all pool finishes.
• Pre-Assembled - Requires no tools to install, operate or maintain.
• Simple, quiet, automatic pool cleaner.
• Flowkeeper Valve with Insta-Skim - Compact self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch.
• Long-Life Diaphragm: The G3 has only one operational moving part - the Long-Life Diaphragm. No gears, wheels, or flappers means simple operation, maximum power, and low-cost maintenance.
• Patented Quick Release Cassette - Provides quick and easy access to the Diaphragm.
• Cleans automatically. Removes dirt, debris, bugs, twigs, leaves, sand and even pebbles.
• Quieter operation - No flapper or hammer noise.

Includes a long-life hose 1-year warranty on manufacturer defects and wear and tear; 2-year warranty on hose

• This listing includes everything needed to get started today ~ New G3 Cleaner For In-Ground Pools, 36 Feet of Hose and an additional Diaphragm.
• Quiet, powerful suction cleaner; works with low-speed pumps for maximum efficiency. Durable Long-Life Diaphragm with reliable, one-moving-part-technology
• FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features.
• The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency.

User questions & answers

Question:	Can this pool cleaner be used to clean above the ground vinyl pool
Answer:	I have no idea I use it for my in ground pool.
Question:	Was the hose twist lock and good quality
Answer:	Do not know what a Hose Twist Lock is. I do know that this Baracuda G3 works great and our hose NEVER twists or gets caught up in a circle of knots.
Question:	What depth pool can this be used for
Answer:	I use it in a 3-8 foot pool that is about 28,000 gals, 35 x 10 foot perimeter.
Question:	Does this come with the pool hose
Answer:	Yes Annie, mine came with 12 sections, each section about 3 ft long. I have figured out a way to run my hose through the skimmer and then I use one of those skimmer socks to catch the stuff that the Baracuda catches.....I am very happy with my Baracuda....Worried at first, but now she's doing great.

Product features

Baracuda G3 Suction Cleaner

The G3 suction cleaner is a versatile in-ground suction cleaner that delivers superior performance and is compatible with low-speed pumps for maximum efficiency. Quick and easy to set up, this compact cleaner effectively inhales small and medium debris while thoroughly cleaning pool floors, walls and steps.

Only One Moving Part

The G3 has a Long-Life Diaphragm providing superior reliability. Plus, a Quick-Release Cassette makes it easy to access the diaphragm when needed.

One Cleaner Fits All

Concrete, tile or vinyl, the G3 works on them all. The 36-Finned Disc provides a wide cleaning path and adheres to any surface, maximizing surface area and suction for a more efficient cleaning with reliable and noticeable results.

Ease of Movement

Navigate tight corners with enhanced agility. The Wheel Deflector prevents the cleaner from getting stuck, ensuring continuous cleaning.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

Hayward’s Poolvergnuegen 2-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 8 to 10 feet before turning, and turns can range from 90 to 450 degrees. For average-sized pools up to 16’ x 32’, the 2-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

• The Hayward Poolvergnuegen 2-Wheel Suction PoolCleaner features patented self-adjusting turbine vanes that deliver maximum power at any flow and allow passage of large debris
• 2-wheel drive cleans average-sized pools up to 16’ x 32’
• Patented tire treads enhance climbing ability and obstacle maneuverability
• Multiple pre-programmed internal steering sequences ensure complete pool coverage and efficient cleaning
• Patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles

User questions & answers

Question:	do you have parts for the island pool cleaner
Answer:	I purchased the unit a few months ago, so I haven’t had a need to purchase any parts.
Question:	Does this work on an in ground pool system without a slimmer basket
Answer:	I have never heard of an inground pool without a skimmer. The hose plugs into the skimmer suction.
Question:	My cleaner keeps falling over onto its side and staying there. Are there weights that can keep it right side up
Answer:	My cleaner is kept upright by the hose which is floating on top of the water. Did you use the hose like it came with the box and hooked the right element (the one with the two white floating supports) to the cleaner?
Question:	Hi! what is the difference between 2-wheel w3pvs20jst model vs. 2-wheel pv896584000-013 model
Answer:	I don't know. I have never owned the 2-wheel model. I believe it's for larger pools,

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

Product description

Equipped with patented SmartDrive technology, the AquaBug Cleaner from Hayward is designed to automatically clean the bottom of all sizes and shapes of above-ground and on-ground pools quickly and completely—making sure no debris is left behind. It operates separately from your pool’s filtration system and connects directly to your skimmer, installing in less than 10 minutes without tools. A unique turbine system helps AquaBug move gently across the bottom of your pool, providing exceptionally quiet performance while improving circulation by pulling water up from the bottom of the pool as it moves. A deluxe bumper ring reduces friction, guiding it away from walls, steps and ladders to continue the cleaning cycle until the job is done.

• The AquaBug Cleaner from Hayward is designed to automatically clean the bottom of all sizes and shapes of above-ground and on-ground pools
• Patented SmartDrive programmed steering system ensures quick and thorough cleaning
• Unique turbine/gearing system provides constant balanced water flow assuring quiet operation and gentle movement across the pool bottom
• Connects directly to the pool skimmer and installs in less than 10 minutes without tools (includes 32 feet of hose)
• Deluxe bumper ring reduces friction, guiding the cleaner away from walls, steps and ladders to continue the cleaning cycle

User questions & answers

Question:	Can you use the hayward aqua bug w-3500 pool cleaner for my intex 12 x24x 52 above ground pool an intex ultra frame pools
Answer:	Theres an adapter inside box. Cone shape u could use.
Question:	our hose pieces have been cracking - is there a replacement hose someone could recommend
Answer:	Nope different size
Question:	Will this work somewhat in a rectangular pool or will it not work at all? My pool needs help with the bottom. Anything would be better than nothing
Answer:	The Hayward # SP1516 Strainer Housing, Lid & Basket fits the PowerFlo LX, PowerFlo II, and PowerFlo UN.
Question:	I have a coleman 18' pool. Someone said they bought an adapter to make this fit into their filter. Which adapter did you buy
Answer:	If you mean the basket screws onto the pump, then this does. The intake and out takes both are threaded. The lid is a quarter turn.

Product features

Above Ground Pool Cleaners

The Hayward family of above-ground pool cleaners is designed to clean the bottom of all sizes and shapes of above-ground/on-ground pools automatically. These attractive little fellows operate off the pool's existing filtration system and feature our exclusive SmartDrive program steering, so it won't miss a spot. Performance, price and stimulating 4-color cartons are sure to make this your favorite pool purchase of the summer.

Put away your manual for good

Hayward’s family of above ground cleaners provides you with easy, trouble-free operation. It works with your existing filtration system, and everything for simple, 10-minute-or-less installation is included – even the hoses. Not only will vacuuming be easier, but faster too. Every cleaner in the family utilizes patented SmartDrive programmed steering to clean faster and more thoroughly than random cleaners. Each improves water circulation by pulling water from the bottom of your pool as it moves, which helps your pool stays cleaner. Our family of superior quality cleaners is designed to keep your pool at its sparkling best, without the drudgery of manual cleaning. And it’s from Hayward, the company that engineered automatic pool cleaning technology.

A cleaner for everyone

Adults and kids alike love Hayward’s family of above ground cleaners. If it is luck that you need, then AquaBug is for you. This ladybug designed cleaner will fly across the bottom of your pool, seamlessly cleaning every inch of the floor. If deep water discovery peaks your interest, then Diver Dave is your guy. He can travel to the deep depths of your pool, crawling along the bottom and picking up all of the debris that has drifted down. Wanda the Whale completes this happy family. If you are looking for fun and cute ocean life to entertain your pool and your kids, Wanda is definitely the cleaner for you. A member of this family is waiting to join yours, so stop waiting and bring one home today!

User questions & answers

Question:	Is it best to leave robot in the pool when not in use
Answer:	no because it should not be in pool when people are, especially if it is on. very dangerous.
Question:	Does it clean walls
Answer:	Mine climbs the walls all the way up. It cleans the cove at the bottom as well. I love this machine. It has totally cleaned my pool of all debris. I highly recommend it for above ground pools.
Question:	I have a ladder going into my pool. Won't this cord get tangled on the ladder
Answer:	Yes. If it fits behind your ladder, it will absolutely get tangled. Has happened many times. I am thinking of attaching a cross-bar that runs from the ladder to the pool wall to stop the robot from going behind.
Question:	Will it clean a 30’ round pool
Answer:	My pool is 15 x 30 and it cleans it pretty well. It may miss a spot here and there but this product is so worth the money.

Product features

No Extra Stuff Needed

No booster pump. No extra hoses. No installation. Just plug it in, drop it in, and walk away for a clean pool.

Lets all the Water Out. Fast.

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Goodbye, Dirt and Debris!

The E10 traps and locks-in all sorts of debris so your pool is left exceptionally clean.

E10 Packaging List

Ideal Pool Length: Above ground pools up to 30 ft.

Cleaning Coverage: Floor only

Cleaning Cycle Time: 1.5 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off

Cable Length: 40 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

AIPER SMART Compatible for AIPER Suction Pool Vacuum Cleaner 360° Rotatable

• 【Wall-Climbing Function】 AIPER SMART suction-side vacuum cleaner climbs the walls automatically and effortlessly clean the fine dust or tough dirt on the wall and ground of the wall. Suited for in-ground swimming pools, remove all kinds of garbage like leaves, buds, tough dirt and debris etc.
• 【360 Degree Rotatable】 This 4-wheel suction pool vacuum can rotate flexibly under water, which ensures full cleaning with peace of mind
• 【Up to 32ft Pools】20 pcs 20'' hoses included in the package. Ideal for in-ground swimming pools. Easily pumps water out of the pool via its skimmer or drains, uses it for locomotion and debris suction, then returns it after being filtered via pool return or outlet valves.
• 【No Electricity Needed】 Just attach it to your existing filtration system, no cost for electricity and don't worry about electric shock.
• 【Thorough & Efficient Cleaning】 4-wheel drive cleans average-sized pools up to 32ft, enhanced climbing ability and obstacle maneuverability- especially with main drains. This makes AIPER SMART suction cleaner ideal for all pool surfaces and shapes.

User questions & answers

Question:	my cleaner does not work it just want to float around just below the surface
Answer:	Not loud or noticeable Works as advertised
Question:	how loud is it
Answer:	There's nothing to program. It connects to the sweeper hose. Suction propels it.
Question:	Do you have to program this yourself
Answer:	Yes, it works in my deep end which is 7ft deep. I do not imagine depth would be an issue for this as long as you have the hose set to long enough. It can get quite a ways up the sides of the pool.
Question:	Will this suction pool vacuum work in a 7’ deep end
Answer:	It changes the direction of the machine when it hits the side of the pool

Product features

AIPER SMART Automatic Robotic Pool Cleaner

• It is capable for cleaning all surfaces and vacuums up fine dirt, debris,hairs and leaves.
• Work with 0.75hp pump, clean your swimming pool quietly and sufficiently.
• Easy to set up. Just connect this pool vacuum to your pupm, and wait for the splashing fun.

Climb Walls

This product can climb & clean walls with a curved surfaces without any issue. To avoid damaging to your pool and the cleaner, please do not use it to clean vertical stairs in the pool.

Powerful Suction

This automatic suction-side pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! No jamming or breaking interrupting the cleaning process.

Efficient Clean

This pool vacuum can efficiently remove dirt, debris,fine dust and leaves. Wheel Deflector for movement around tight corners. High quality driving belts protect the pool from scuffs and damage.

Avoid Chemical Erosion

Please don't use this suction pool vacuum immediately after chemically shocking your pool. During non-pool season, please store the pool cleaner outside of the pool.

Robust Driving Wheels and Belts

Equipped with premium rubber belts, which are made of high quality material, provide enough gripping force ro grasp the pool floor and wall firmly, enhanced the cleaning efficiency.

Package Contents

suction vacuum body*1

hose*20

connecting joints*4

hose weight*1