12 best pool vacuum cleaners

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

Product description

Don't subject your swimming pool or family to dirty pool water this summer. Instead, keep your pool free of dirt and debris by using the Intex 28620EP Rechargeable Handheld Above Ground Swimming Pool Vacuum. This handheld, battery-operated pool vacuum cleaner is great for picking up dirt and debris, while not being a burden to use. It's powered by Ni-MH rechargeable batteries and has excellent suction power. All in all this purchase includes the vacuum cleaner, 2 interchangeable brush heads, USB charging cable, 94-inch telescoping aluminum shaft, and a shaft adapter. Note: This pool vacuum needs to be fully submerged in order to work properly. If not fully submerged, the automatic shutoff feature turns on and shuts off the vacuum. Keep your pool clean all year long with the help of this handheld vacuum from Intex.

• Strong, built-in Ni-MH rechargeable batteries for powerful suction capability
• Suitable for use with all pure spas and above ground pools up to 18' Diameter
• Includes two interchangeable brush heads, USB cable for recharging, 94" Lightweight telescoping Aluminum shaft, & SHAFT adapter to fit longer/wider telescoping aluminum shaf
• Automatic shutoff feature when vacuum is not submerged in water, IPX8 waterproof switch for added protection against water submersion
• Keep pool water clean by vacuuming out dirt and debris
• Must be submerged to operate properly.

User questions & answers

Question:	Can this be used to spot clean an inground pool too
Answer:	Sure, as long as you can reach that area in the pool. Above ground pool vacuums usually have softer brush bristles, so the only downside is your brush might wear out faster on the in-ground pool plaster.
Question:	I plugged this in to charge. The indicator light does not turn on. Is it defective or I need a specific power adapter to use it with
Answer:	when i first plugged in mine (last week) the light didn't come on. I left it plugged in at it worked great. I just now plugged it in for the second time and I got a light. maybe it might just need to have some charge for the light to come on. I used a battery charger with a USB port rated for 5V 1A
Question:	Does anyone know if they sell just the charging cable, wife lost the cable
Answer:	Yea at Walmart
Question:	Can we schedule for a different date
Answer:	Sure

Product features

Brush Heads

Two interchangeable brush heads included.

Rechargeable Ni-MH Battery

Strong built-in Ni-MH rechargeable battery (50 min. per charge) provides high performance suction power.

USB Cable

USB Cable included for convenient recharging (plug not included).

Telescoping Pole

Includes 94in lightweight telescoping aluminum pole.

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency. The G3 will devour small and medium-sized debris without trouble to ensure the floor, walls and steps of your entire pool receive a thorough cleaning.

Premium Efficiency

The Zodiac G3 is compatible with any single, two-speed or variable-speed pumps to clean more efficiently and with less flow. G3 suction cleaners work with a FlowKeeper Valve that automatically regulates water flow, to maintain peak cleaning performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch Intelligent Design

Navigating an in-ground pool is made easier by the Wheel Deflector which helps with movement around tight corners. Equipped with scuff-resistant Long-Life Hoses, the G3 is a rugged pool cleaner that is eliminates scuffs on all pool surfaces. The 36-Fin Disc is cleverly designed to increase adhesion to the pool surface and avoid getting hung-up on lights, drains covers, fittings and other pool features.

The G3 has a durable Long-Life Diaphragm with reliable, one-moving-part-technology that eliminates the need for wheels, flappers or gears to provide silent operation and low-cost maintenance. The patented Quick-Release Cassette provides easy access to the diaphragm for simplified routine maintenance.

Convenient Installation

The G3 suction cleaner works in all in-ground pools and can be installed in two simple steps:

1. Attach the disc, wheel deflector and hose

2. Connect to the skimmer or dedicated suction line

* No tools or special plumbing required *

• Quiet, powerful suction cleaner; works with low-speed pumps for maximum efficiency.
• Devours small and medium-sized debris and cleans floor, walls and steps of your entire pool.
• FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps.
• Wheel Deflector for movement around tight corners.
• Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features.
• Durable Long-Life Diaphragm with reliable, one-moving-part-technology

User questions & answers

Question:	made in china
Answer:	Lol, I don’t think so but I didn’t check. Google it, lol
Question:	Do you need to buy the additional scrub disk
Answer:	I live in Florida where the cleaner runs 5-6 hours per day 365 days per year and a scrub disk last at least three years. Save your money and wait until you need a new one and you can get it cheaper buying it by itself than the cleaner with an extra scrub disk package deal.
Question:	Can I replace a G2 with a G3 without any special modifications? Are they interchangeable
Answer:	You should be able to replace the G2 with the G3, with out problems.However, check the hose weight placement on the first hose BEHIND the G3 and check the suction at the end of the LAST hose, before attaching the G3. If you want a WONDERFUL addition, and I would HIGHLY recommend it, buy the TWISTER and add it between the first and second hose sections at the wall or basket strainer connection. It will COMPLETELY eliminate the hose curling and allow the vacuum to access ALL point of the pool. Even the STEPS!! It's wonderful!
Question:	Does the G3 come with hoses
Answer:	yes hoses come with - our pool 21ft wide and 42 ft long - needed to purchase extra for the cleaner to reach whole pool - however can always leave at one end one day and switch it to the other end later or next day - cleaner is a work horse!

Product features

Baracuda G3 Suction Cleaner

The G3 suction cleaner is a versatile in-ground suction cleaner that delivers superior performance and is compatible with low-speed pumps for maximum efficiency. Quick and easy to set up, this compact cleaner effectively inhales small and medium debris while thoroughly cleaning pool floors, walls and steps.

Only One Moving Part

The G3 has a Long-Life Diaphragm providing superior reliability. Plus, a Quick-Release Cassette makes it easy to access the diaphragm when needed.

One Cleaner Fits All

Concrete, tile or vinyl, the G3 works on them all. The 36-Finned Disc provides a wide cleaning path and adheres to any surface, maximizing surface area and suction for a more efficient cleaning with reliable and noticeable results.

Ease of Movement

Navigate tight corners with enhanced agility. The Wheel Deflector prevents the cleaner from getting stuck, ensuring continuous cleaning.

• Sit back and relax while the Nautilus CC cleans the pool for you. Ideal for small pools up to 33 feet, this compact cleaner will have your pool ready for splashing fun in just 2 hours
• Efficiency is key when it comes to pool cleaning. Unlike suction and pressure cleaners, Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Ditch the pumps and hose and save energy with every pool cleaning
• Dolphin does all the hard work for you. Agile and efficient, the Nautilus CC was designed to clean your pool, effortlessly. With superior scrubbing and filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean
• Clean your pool with the touch of a button. Schedule the Nautilus CC to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends

User questions & answers

Question:	Is this all set to use when you get it
Answer:	yes, plug it in and turn it on. it works great! I haven't messed with the schedule set up yet but it states you can pick days and it will auto clean
Question:	Can you use the ultra fine filters on this model? I notice it is standard on the Triton model, but it looks like the same configuration as this model
Answer:	Hello, Yes you can use the ultra fine filters with this unit, you just have to buy it since it does not come with it
Question:	How does this unit compare to the tigershark
Answer:	I had a Tigershark and the basket was a pain in the butt to clean. It also would let a lot of debri back in the pool when you pulled it out. I also had the motor go out and then the next year it stopped working. It came out when everyone else was using cloth bags to catch debri. At that time the Tiger Shark was the king but there are better designed models out there unless Hayward re-designed the unit.
Question:	will this work on a pool with 20,000 gallons capacity
Answer:	Yes. My pool holds 20,000 gallons and this machine works perfectly. A true timesaver.

Product features

Sucks Debris. Not Energy

With an average operating cost of 5 cents per hour, you don’t have to sacrifice a high energy bill for a clean pool.

Compact and Nimble

This robot climbs and cleans the walls with ease. It’s versatile and works on any pool surface type- gunite, tile, plaster, and everything in between.

Always Easy to Handle

The quick water release helps keep the Nautilus CC lightweight and easy to remove from the pool.

Nautilus CC Packaging List

Ideal Pool Length: Up to 33 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 50 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to set the weekly timer

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to clean the filters

Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters every two months. Bag filters can be washed in the washing machine at 30 degrees, using a synthetic wash cycle, and allow to air dry. Cartridge filters can be clean in the dishwasher at 30 degrees. Although the filters may look clean, small particles may dry into the filter material and clog the filters.

Product description

Poolmaster's Classic Collection offers a generous selection of performance and built-to-last products made from resilient components designed to keep your pool sparkling. Specially made for removing large leaves from all pools, the 15 inch diameter pool leaf vacuum and handle are made of durable ABS. Multi-directional wheels provide smooth maneuverability while eight high-pressure jets provide the water pressure needed for superior cleaning power. Vacuum includes one reusable all-purpose leaf bag. The quick-disconnect fitting allows use with any standard garden hose and standard pool pole - all sold separately. Note: For quick removal of small debris, try Poolmaster item 28008, Magic Jet Pool Vacuum.

• Specifically for removing large leaves and dirt and debris from pools; see item # 28008, Jet Vacuum for easy pick up of small debris
• Large, 15 inch diameter vacuum with handle made of durable ABS
• Underside features 8 high-pressure water jets and 4 multi-directional wheels
• Use with standard garden hose and standard 1-1/4 inch pool pole, sold separately
• Includes 1 reusable all-purpose leaf bag. NOTE: Garden hose and telescopic pole sold separately. Please refer to the embedded video on this page for instructions on attaching the leaf bag to the vacuum

User questions & answers

Question:	Does it use a standard tele pole & im assuming it’s safe for fiberglass pools
Answer:	Yes it uses our pole that we have for our skimmer. I would assume it would be safe for fiberglass because it has plastic wheels. Nothing else touches.
Question:	How does this do with removing algae
Answer:	not for algae it does well with leaves
Question:	What size pole fits this! My inter pole is to small apparently
Answer:	Walmart has a pole that works for 24.99 :) I looked everywhere on amazon and found some but nothing that would clearly be the right fit. The Walmart pole is awesome and will fit the brush head I got as well
Question:	What size pole do you need for this? I have the Intex pole and it will not fit
Answer:	you need standard pole . see link. https://www.leisurepro.com/p-swl8350a/swimline-3-piece-telescopic-pool-pole-4-to-12?gclid=CjwKCAjw_tTXBRBsEiwArqXyMrIp88KJLqaZMgaZCLKKcxnwp4EAXXCtNKDMoge0MU4NaGPyhH37-xoC12wQAvD_BwE&kwid=productads-adid^228662146443-device^c-plaid^297672296559-sku^SWL8350A@ADL4LP-adType^PLA

Product features

Large Profile Design

The large-profile vacuum features a center opening that accommodates capturing large loads of leaves.

The built-in quick-disconnect adapter fits any standard size garden hose.

Powerful Suction

Once connected to your garden hose, the eight water nozzles, located on the underside of the vacuum, turn into mini jets that create a powerful suction and help lift leaves into the vacuum bag.

Easy To Maneuver

Four multi-directional wheels aid in easily maneuvering the vacuum along the pool floor.

NOTE: For use with any standard telescopic pool pole - sold separately.

Includes Reusable Leaf Bag

The reusable all-purpose mesh bag with push-lock closure fits easily around the neck of the vacuum.

The vacuum ring holds the mesh bag in place.

Product description

Package Includes:

1 x Swimming Pool Cleaner

10 x Durable Hoses Sets

1 x Regulator Valve

1 x Manual

Problem: Cleaner is sluggish or has stopped operating.

Solution:

● Check if the pump is ON and / or primed.

● Check Cleaner head for blockages.

● Clean and empty pump basket and empty skimmer/weir basket.

● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool

pump as per manufacturers specifications.

● Inspect the regulator valve and flush away any debris build-up.

● Check the Mat for wear.

● Make sure the curved tips of the Mat are facing upwards.

● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.

● Check the hose for blockage.

● Check the hose for leaks by lifting each section above water while pump is running.

● Consult a pool shop in your area.

Problem: Cleaner travels in a repetitive pattern.

Solution:

● Adjust return jets downwards.

● Verify proper hose length.

● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.

● This should be done at the deepest part of the pool.

● Remove or add one hose section.

● Inspect the Regulator Valve and flush away any debris build-up.

● Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax

the memory.

● Twist each hose section a half-turn at each connection point.

● Ensure the wheel at the top of the Cleaner head is rotating freely.

• EASY TO SET UP & EFFICIENT CLEANNING & SUPER QUIETLY. This pool vacuum cleaner is very easy to assemble and install and allows you to clean your pool effortlessly and quietly, unlike some other automatic pool cleaners that make an annoying hammer noise. Low noise, create a quiet operate environment
• WARM TIPS: Please notice that this pool cleaner vacuum requires at least a 3/4hp swimming pool pump or Minimum Flow of 6.5m3/hour/1700gal/hr. We recommend to adjust the weights and the regulator valve to get the best results for a clean pool.
• GREAT SUCTION POWER & CAN'T STUCK: This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently remove dirt, debris. Wheel Deflector for movement around tight corners. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• SAVE YOUR TIME, MAKE YOUR LIFE EASIER: Our pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It keeps the pool clean, and it will cut down a lot on your time spent cleaning the pool.
• WORRY-FREE GUARANTEE : One year warranty, if any part of this item broken you can contact us for a free replacement.We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order,please keep in touch with us, we’ll always provide you a timely and satisfying solution. FREE HOSES: Our swimming pool vacuum come with ten durable hoses for replacement. You can attaches this pool sweeper to your existing filtration system.

User questions & answers

Question:	Will it work in above ground pool
Answer:	Has never worked on my above ground pool. I have an Intex 18x52 round with the pump provided with that model. It should have worked. Bought it September 2019. I think I’m just missing something. Had to adapt it to even hook it up and now it just sits on the bottom. Will try again when it gets warmer.
Question:	Will this cleaner get caught on a "Safety Drain Cover
Answer:	Mine has not
Question:	Can use on the vinil pool
Answer:	yes it works well
Question:	What is diameter of suction inlet
Answer:	1 3/4 inside diameter. It's a great product and cleans much better than the Barracuda G2 that it replaced. We recommend.

Product features

Clean Area Note

In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool.

Cleaning Type

The pool vacuum can clean algae, dirt and dust but can not clean leaves.

Underwater Work

Just drop into the base of pool and the max deep is 9.8ft.

Product Specification

Vacuum head, blue skirt and hose size display.

Accessories Display

Comes with ten hoses, one weight, one regulating valve, diaphragm.

If the hose is too long or too short, you can increase or reduce hose.

Hose Diameter

Each hose diameter is 1.96 inch.

There a special hose which need to connect to pool vacuum, and other hose neen to connect with that.

Ten Hoses

Come with 10 hoses total 33 ft, each hose is 3.3ft.

White Little Weight Function

White little weight can keep balance when you clean the pool and seal the hose.

Blue Disc Installation

Need to install the blue disc counterclockwise.

No Air In Hoses

In order to get great usage effect, should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal.

Diaphragm

The diaphragm is silent and service life is 200 hours.

Product description

Hayward’s Poolvergnuegen 4-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 11 to 14 feet before turning, and turns can range from 90 to 540 degrees. For larger pools or pools with deep ends up to 20’ x 40’, the 4-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

• The Hayward Poolvergnuegen 4-Wheel Suction PoolCleaner features patented self-adjusting turbine vanes that deliver maximum power at any flow and allow passage of large debris
• 4-wheel drive cleans larger pools or pools with deep ends up to 20’ x 40’
• Patented tire treads enhance climbing ability and obstacle maneuverability
• Multiple pre-programmed internal steering sequences ensure complete pool coverage and efficient cleaning
• Patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles

User questions & answers

Question:	I heard it had a lead hose and Float clamps is that accurate
Answer:	It has a rubber type hose, float clamps that you can adjust to your needs. Highly recommended!
Question:	Does the Hayward currently have a $100 cash card promotion on this product through Amazon
Answer:	Not that I was aware of.
Question:	Is this a suction side pool sweep
Answer:	It sweeps the bottom very well but it doesn’t go up the walls. If you have lifted drain covers on the bottom of your pool it often gets stuck on them, I’ve adjusted the weights on the hose so many times and I still haven’t had very much luck with getting them exactly right to stop getting stuck on the drain covers.
Question:	Are there any drawbacks to using a 4 wheeler in a small pool (15,000 gallons) rather than the 2 wheeler
Answer:	Not in my opinion. The 4 wheel is said to climb walls better, but really neither one climbs that well. Not like a Kreepy Krawly. However, the 4 wheel seems to have more stability and not get stuck on its side (from reviews). My friend has a 2 wheel 15 x 30 pool. I have a 16 x 32 with a deep end. Apparently the 4 wheel does better in deep water. I think either one would work for you.

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

• INCREASED POWER: The Max offers increased vacuum suction with the Water Tech P30 Motor design engineered for quick & efficient debris pick-up.
• WHOLE POOL CLEANER: Clean entire pool or Spot-Clean in seconds. Includes a removeable 10.5” vacuum head for general cleaning or simple remove to expose nose cone head for hard to get areas. Ideal for In-Ground pools and Above Ground Pools like Intex
• CAPTURE MORE DIRT: The Max features a large debris capture chamber and strong suction for a variety of cleaning; acorns, twigs, leaves dirt and sand.
• CORDLESS CLEANING: Perfect for quick and easy cleaning in the Swimming pool and Hot Tub or Spa. No hoses or cords needed.
• MORE RUN TIME: The lithium ion battery powered Max is designed to run up to 1 hour. Push-Button operation. Attaches to any standard telescopic pool pole. (telescopic pool pole not included)

User questions & answers

Question:	Can this be used for a koi pond
Answer:	Wouldn't suggest it. I don't think it would do really good with too much very fine powdery silt like what's in a pond, it goes right thru the bag even with a knee high hose attached inside for extra filtering. That's when we use the manual vac on the pool to vac to waste. Try at your own risk.
Question:	Do I submerge the blaster halfway and then turn it on? Or do I turn it on and then put it in the water
Answer:	You must turn it on just before you submerge it and don't turn it off till it is out of the water. When you turn it off it opens the cap covering the battery compartment, and you don't want to get water in that.
Question:	What is the output voltage for the charger
Answer:	According to the data plate on the charger it's 10v out. Input ranges from 110-240v.
Question:	I have a Hydro Tools 8351 extension pole. Will that work or do I need a different type
Answer:	I don't know what a Hydro Tools 8351 is but if It is a standard poll it should work. Mine fits on the same poll I use for the leaf basket and bool brush.

Product features

Water Tech P30

Poolblaster Max features increased vacuum suction over entry-level cleaners with the Water Tech P30 motor box - engineered for quick & efficient debris pick-up in any size pool.

Run Time

Intensive cleaning requires power and time. The Poolblaster Max delivers 60 minutes of cordless hose-free cleaning with the performance of a corded cleaner. It fully recharges in under 4 hours.

Whole Pool Cleaner

Clean the entire pool or spot clean in seconds. The Poolblaster Max 10.5" vacuum head and brush array are designed to clean any pool surface quickly and efficiently leaving more time to enjoy the pool and relax.

Max Debris Capture

The Max features a large debris capture chamber and strong suction for a variety of cleaning larger debris like acorns, twigs, and leaves. Exclusive Bag & Filter design also help clean Sand, Silt, and Pollen.

Product description

This powerful pool cleaner is designed just for Intex pool owners and will automatically clean and vacuum the entire pool floor for hassle-free pool maintenance. Vacuums come complete with a 24ft. hose and attach easily to Intex inlet connectors with 1 1/2in. or 38mm hose fittings. For Intex above ground pools with filter pumps with a flow rate of 1,600-3,500 GPH. Not suitable for in-ground pools.

• Requires a filter pump with a flow rate between 1,600 - 3,500gph
• Attaches to the inlet connector in the pool with a 24'7" hose
• For Intex above ground pools with 1-1/2" hose fittings
• Not suitable for in-ground pools
• Ensure the cleaner is set up properly and all air pockets are removed from the cleaner hose to have maximum performance. Please refer to user manual before use
• Replacement parts are available for purchase through the Amazon Online Return Center. For missing, defective, or damaged parts, please utilize the Return Center to obtain a replacement product.

User questions & answers

Question:	Anyone know where to find the replacement filter screen for this? Mine ripped a month after use
Answer:	Mine ripped also after a while. I just went to Walmart and bought some very fine netting and wrapped it around the frame. 97 cents and I was back to vacuuming my pool.
Question:	does this work with any above ground pool or does it have to be an intex, also does it come with all hose and attachments
Answer:	I have a Bestway 18'x9'x48" Rectangular Frame Above Ground Pool and it works on mine. I just had to remove the screen filter that goes to the return fitting but it works perfect. Picks up leaves, berries,small sticks and sand that occasionally comes out Sand Filter. This is my 3rd unit I've had. The first I purchased was one that was said to be new but was used and had leaky hoses, returned for refund. Second One that arrived was brand new but was damaged in shipping had to returned for refund. This last one is perfect so far and has updated single hose instead of the put together one. I Leave it running when grandkids aren't in the pool have not had to skim floor or water since. Note as others said you need a strong pump. I upgrade my pool to a Sand Filter,Saltwater Chlorine Generator, In Wall Skimmer and 1 1/2 Hp Pump.
Question:	Does this work good
Answer:	I was going to write a review about this as I just purchased it, but Amazon wouldn't let me do it saying they were not allowing reviews on it at the moment? What the heck? Anyway, I would give it a solid 4, maybe 5 if it had been assembled properly when we got it. It works now after my husband realized what was wrong. After we got it going, it does an amazingly good job of cleaning, especially for the price. Here's a trouble shooting hint if yours doesn't move when you first try it. Hope it helps. My husband wrote the following: How to troubleshoot an Intex Auto Cleaner which will not reverseWe recently bought an Intex Auto Cleaner. When we first used it, it would move across the floor of the pool, hit a wall, and then stop. It turns out that it was improperly assembled at the factory. Here are the steps to follow to fix this problem:1. Disassemble the Auto Cleaner and open the drive assembly. There is a good YouTube video on how to do this.2. After disassembly and careful removal of the cover of the drive assembly, you will notice that there is a large gear on the left side of the drive assembly. If you manually rotate this gear, you will notice that a plastic piece that resembles an upside down "U" will move to the right, stop for a bit, then reverse direction and move to the left.3. On the cover of the drive assembly, you will notice a small lever which operates a flapper valve. This flapper valve should operate freely by hand.4. CRITICAL STEP! As you reassemble the drive assembly, ensure that the small lever is placed within the upside down "U". If it is outside of the upside down"U", your Auto Cleaner will never reverse and operate as intended.Hope this help
Question:	i have an intex above ground pool with algae at the bottom that i need to remove so which vacuum do u recomend me to have
Answer:	The Intex is a fairly decent pool vac, but it will only pick up loose dirt and debris, like any pool vac will. Get your chemical balance right and use a hard pool brush (no metal!) to loosen up the algae, then use the pool vac to clean it up. I did learn that the standard 1500 GPH pump does not have enough output power to make this pool vac move. You'll need the 2500 GPH pump (which runs about $85 here on Amazon) and a clean filter to make it run good. You'll also find that the 2500 GPH pump does a lot better job at filtering your pool water.

• 【Efficient cleaning】 Different from other models equipped with TPE brushes, the kenwell automatic pool cleaner uses a combination of TPE and PVA, which has the characteristics of a PVA brush, which can provide super adsorption capacity and excellent grip, which can easily and strongly corrode various Garbage, such as leaves, buds, hard dirt and debris, etc., is ideal for cleaning underground and above-ground swimming pools up to 50 feet high.
• 【Humanized Design】 Schedule the robotic pool cleaner to automatically clean your pool by every 1 hours, 1.5 hours and 3 hours.You can know the status of your robotic pool cleaner through the indicator lights. Allows you to better check whether the machine is malfunctioning.
• 【Climbs Wonderfully】 This robotic vacuum cleaner can climbs the walls automatically and can easily clean the fine dust or tough dirt on the wall. The anti-rollover technology let you not worry about it falling. With tangle-free cable to make the cleaning process smoother.
• 【2 Large Top Load Filter】 Built-in large and easy access top loading filter basket traps and locks in dirts and debris leaving your swimming pool extremely clean, also the filter cleaning is very simple. Just need to pour out the garbage and clean it with water.
• 【Ease of Use】Light weight and assembled in-ground robotic cleaner make it easy to use, compare to other vacuums, you don’t need to spend manual labor, just drop it and let it go. Robotic pool cleaner can be equipped with a shining LED bar around the body,by which the robot will illuminnate the pool at night and offer a nice feeling.

User questions & answers

Question:	what is the manufacturer's warranty on this pool robot
Answer:	Before I purchased mine, I contacted the seller through Amazon and I was told that I had 6 months to return it if I was not satisfied and the robot has one year warranty.
Question:	what is the manufacturer's warranty on this pool robot
Answer:	I thought I recalled 30 or 60 days, but I purchased a 2 year added warranty, very inexpensive because I wasn't that familiar with this particular product. We have used it at least 8 times now. Once a week should be all needed going forward. I love it! Works well, easy to figure out. We had one issue where it seemed it wasn't working, but pulled it up and found that we had not closed the basket completely. Once we did that, perfect again!
Question:	My 2025 adc keeps tyingthehose up in knots, how do I stop this
Answer:	Mine crosses over one time once in awhile but never ties in knots. Yours must be going in circles too much. I'd take it back to where you bought it. Or a repair shop like "Leslies Polls Supplies" may be able to repair it so it goes more straight.
Question:	What's the lifespan of this little guy
Answer:	The shoes and the wings need to be replaced after 2 years. I replace the whole unit after 3 years because the maintenance can cost more than $100/year and it can fail anytime, just like a used car.
Question:	Does it come with a vacuum gauge
Answer:	yes it comes with gauge and hoses.
Question:	Does this work for pebble tek pools
Answer:	Yes..I have used these many times with pebble tek it will work fine. The only draw back is that it will wear the easily replaceable feet a little sooner than a regular plaster type pool .

Product features

Pool Vac XL

Pool Vac XL exclusive AquaPilot programmed steering moves the cleaner silently in a predetermined series of turns for more thorough cleaning. This automatic suction pool cleaner is powered by the existing filtration system where all debris are captured. In addition, pool owners don't have the expense of an energy-consuming booster pump. For the ultimate in easy, trouble-free operation, leave your pool cleaning to the most sophisticated automatic suction pool cleaner available.

Robotic Pool Cleaner

Kuppet Pool Vacuum will keep your swimming pool clean and let you and your family and friends enjoy the happy hour in the pool.

LED Light

• The robotic pool cleaner with LED lights, you can tune accurately from a distance, even in the dark