14 best mini fog machines

• [HEAT UP QUICKLY] 400-watt high-efficiency heater block warms up in 4-5 min and leaves little residues, which helps to extend the service life of machine.
• [LARGE TANK CAPACITY & 0.3OZ/MIN FLUID CONSUMPTION] 300ml (10.1 oz.) tank capacity lasts between 1 and 3 hours depending on use; 0.3oz/min (7.5ml/min) fluid consumption quickly transforms your environment.
• [PORTABLE] measured at 9.1” x 4.3” x 4.5” and weighing 3.5 lb., this fog machine highly portable for smaller venues of area use.
• [LONG WIRE & OUTPUT DISTANCE] 9.8ft.wire control & 6.6~9.8ft.output distance let you position your fogger where you need it, ready to create the ideal effect you want.
• [100% SAFETY & SUPERIOR QUALITY] CE and RoHS approval, ABS environmental materials, safer metal wire; made for use with quality water-based fog fluid.

Product features

Huge Output & Wide Coverage

• After less than 5 minutes of preheating, our smoke machine begins to cover 7–10 feet with a mass of fog, improving your parties, performances, and more!

User-Friendly Design

• The clear gauge lets you easily track the device's fluid level while the built-in fuse prolongs its service life by preventing power surges and overheating.

Precise Temperature Control

• Our advanced smoke machine precisely controls its temperature using a built-in thermostat to ensure full atomization of the fog. Its fan and vents efficiently disperse the heat created to keep it running smoothly for years.

Add In Fog Fluid

Pour your professional fog fluid into the tank until it fills 50–80% of the tank. Never add any flammable liquids.

• Fluid Consumption: 1.5 tsp/min. (7.5 mL/min)
• Output Distance: 6.5–10 ft. (2–3 m)
• Tank Capacity: 10 fl. oz. (300 mL)

Power Switch

Flipping the power switch gets the machine running and starts the preheating process that will allow it to efficiently atomize your fog juice into a massive cloud bank.

Remote Control

The light on the wire remote turns red when preheating is over and the machine is ready to go. Press the button and your fog will begin to flow out from the front nozzle.

• ◆ NON-TOXIC, UNSCENTED & HIGH POWERED: As the power of fog machine is 500w, the output power reaches to around 2000 CFM (c.f./min) between 2 and 3 meters distance and duration of time is 30-40 seconds. Besides, You can use this smoke machine without any scruples because it doesn’t produce any toxic gas.【NOTE: This fog machine ONLY works under 110-130V.】
• ◆ EASY TO USE: The fog machine with lights comes with both two different wireless remotes controls, one is that you could turn on and turn off the fog machine for easy use and the other is equipped with LED light control buttons, which is convenient for you to freely switch colors.
• ◆ 13 COLORS WITH RGB LIGHT EFFECT: There are total 13 colors for yout to choose from, namely, red, blue, gree or mixed colors (cyan, fuchsin, yellow and white), various light effects at different speeds (fade, flash, smooth and strobe). The fog machine is also possessed of RGB LED light effect to heighten atmosphere.
• ◆ DURABLE IN USE: This type of smoke machine is made from some premium-grade materials- iron as well as alumium metals, which is tough enough for better heat dissipation and durable enough for longer service life. Besides, 250ml tank ensures long lasting fog production.
• ◆ ENERGY SAVING: Due to advanced electronic constant temperature system and specialized pipeline technology, this fog machine with light can save 20% energy, comparing with other tranditional smoke machines on the market. More importantly, the AGPTEK fog machine only takes 3-4 minutes to warm up quickly.

User questions & answers

Question:	How do i get a replacement remote for the agptek fog Machine
Answer:	Hello customer, we also sell the remote control alone, search the ASIN "B08L39WM76" at Amazon.
Question:	Can this be used outdoors
Answer:	Dear Customer, this fog machine is more recommended to be used indoors. It can be used outdoors, but the fog and light effect might not be as good as indoors.
Question:	How high does the fog go upfrom the ground
Answer:	Inside it will fill the room with smoke, from the floor to ceiling. It produces plenty of smoke
Question:	Is there a timer remote control? will chauvet dj fc-t wired timer remote control work? thanks
Answer:	Hello customer, thank you for your inquiry. We are sorry to tell you that there is not a timer remote control with this machine. But we release a new fog machine that with auto spraying fog feature, you can search the ASIN"B08BQYNPXV" at Amazon if you are interested in it.

Product features

PLEASE NOTE!!!

1. For your safety, make sure there is enough atomized liquid in the tank before each use and ensure the metal nozzle is completely immersed in atomized liquid.

2.DO NOT spray directly on people and keep the fog machine away from heat sources such as fireplaces and radiators.

3.You needs to keep pressing the red button on the Wired Receiver, so that the fog machine will continue spraying smoke. Or you can press the unlock button on the wireless remote control( just one press ) to start spraying smoke. And it will spray for about 20 seconds and then stop spraying to warm up again. Each warm up time needs 3-5 minutes. You need to press the button again after each time warming up to activate fog.

• ♦ WIDELY USE - AGPtEK fogger machine indoor HS0056 can add a great amount of mist to your pond or water tank to filter the bad smell with ultrasonic technology. You can put the fountain atomizer in your pond, rockery, fish tank, vase, tank, etc. It will create a magical atmosphere. Especially perfect for Halloween and other holidays.
• ♦ WATERPROOF - The ultrasonic foger is waterproof and the length of the power adapter cable is long enough. Ideal for indoor or outdoor fountains, water feature, and office use.
• ♦ ENVIRONMENTAL PROTETION - Our plant humidity fogger can provide large amount of mist. Aerosolized amount≥400mL/H.No heat or chemicals used.
• ◆ EASY TO OPERATE - No heat or chemicals should be used in this led fog machine. This fog machine for fountains is easy to operate, put this water mister in the water and then the mist will appear.
• ♦ SAFE TO USE - The voltage of AGPtEK mist makers is 24V, so it's safe to use.

User questions & answers

Question:	Is there any way to have it not splash as much? Makes puddles in my snake terrarium
Answer:	All you need to do is use a god size jug or jar with a sealable top. On the lid Drill a hole to run the misters wire through, a larger hole half inch or whatever size tube you want to push the fog through. And one more hole that you will run an aquarium air hose through that has an air stone places at the bottom of your jug and air pump hooked up on the outside. After putting your wires and tubes through silicone seal around your drill holes to make your jar air tight. Put the large tube where you want the fog and fire up the air pump and fogger. Since it’s in an Air tight container the bubbles being blown through the air stone will create pressure in the sealed jug. The pressure will push that fog nice and thick ansywhere you want it to go. Have fun everyone !
Question:	Is it strong enough to have a tube attached to it and produce smog through the tube? Not a long tube it would be about 12in
Answer:	Your water level is most likely too low. I have to keep adding more water every couple hours or it doesn't make the mist.
Question:	The one I got doesn't have the water level sensor and after being on for a while it stops making mist and starts flashing just the red light
Answer:	I use it in a five gallon bucket and the mist is so thick I cant see the bucket or water but it only works properly with the float.
Question:	How much volume can the mist generated fill? Looking for something to use in a large cauldron for Halloween
Answer:	Yes

• One Quart of premium water based fog machine fluid - remains clean, dry and odorless
• High density formulation delivers good hang time and excellent dispersion
• FogWorx Fog Juice is designed for use with any water based fog machine - Optimized for machines with as little as 400 watts
• Impress customers and friends, perfect for lighting enhancement applications, night clubs, parties and mobile DJ's
• Proudly made in the USA with pharmaceutical grade chemicals

User questions & answers

Question:	Must be used with fog chiller .. does it really? there are occasions when we just use the fogger for a short time, not filling the chiller with ice
Answer:	We just put it in our little fog machine, and only use for a short time until it runs out. We’ve never had to chill anything. Our machine doesn’t even have that option, and it works perfectly fine.
Question:	Will this make low lying fog in a chauvet lighting dj 700 hurricane fog machine, black (h700) premium
Answer:	Yes
Question:	Will this be ok for a 400w fogger
Answer:	Yes, works great. Just used it with our new 400w fogger and works really well.
Question:	how long it does it last
Answer:	That would depend on many factors. (Indoor or Outdoor, the amount dumped into the area, air circulation in the area, and temperature). This is a long lasting fog. I've flooded a 20 x 24 foot room with just a few squirts from my fogger. It took close to 2 hours for it to totally dissipate. At one point the fog was too thick for my laser to cut through, so be careful how much you dump into a room.

Product features

Fog Worx Low Lying Gallon

This premium water based fog machine fluid is a high density odorless, non-irritating, non-toxic, and a non flammable formulation. Fog Worx Low Lying Fog delivers excellent disper­sion across the ground for a great Halloween graveyard effect.

This product is designed for use with any water based fog CHILLER machine.

Fog Worx Fog Machine Cleaner Quart

Fog Worx Machine Cleaner will optimize the performance of your water based fog machine by removing deposits that build up in the machines heater core. This product can be used in all water based machines to help prevent your machine from clogging.

Fog Worx Regular Gallon

This premium water based fog machine fluid is a medium density odorless, non-irritating, non-toxic, and a non flammable formulation. Medium density formulation delivers good hang time and excellent dispersion.

This product is designed for use with any water based fog machine. Optimized for machines with as little as 400 watts.

• The new Smoke Pencil ONE is a professional handheld air leak detector used by energy raters, HVAC technicians, auto mechanics, and contractors to identify drafts and air leaks in a home, business, or automobile.
• EASY FOGGING – You control the fog in the palm of your hand. Simply pull the trigger on the Smoke Pencil Pro smoke stick near the area that you suspect a draft and see how the smoke moves to show air current or leakage.
• DURABLE – The Smoke Pencil ONE air detection hazer is perfect for personal or professional use, featuring a pocket sized 3” x 5” x 2” robust body frame that resists drops and damage, smooth grip finish and locking trigger for easier toolbox storage.
• Includes a 3 oz bottle of non-toxic fog juice smoke fluid that lasts about 12-15 hrs. The Smoke Pencil ONE machine only produces smoke and consumes batteries and fluid when the trigger is pulled and is reverse compatible with all previous smoke fluid accessories and smoke fluid.
• 30-DAY GUARANTEE – If for any reason you aren’t completely satisfied simply send your Smoke Pencil Puffer Tool back for a full refund within 30 days!

User questions & answers

Question:	can it be used to detect rain leak around a window
Answer:	Water will flow differently than air, but if you pressurize the house I could see how using the Smoke Pencil to trace air penetration around a window could be helpful to track a water leak. However, if the water leak is from a tiny crack you might not be able to see it.
Question:	Description says "non-toxic" but what is in the fog? I assume not titanium tetrachloride
Answer:	The fluid is mostly glycerine and a little water. These smoke pencils are like mini fog machines. Totally different from the acid puffers with tetracloride acid. You cant hardly buy the acid ones anymore.
Question:	Can the amount of smoke being generated be adjusted? Does the trigger have one setting, two, or is it continuously adjustable
Answer:	The trigger has two parts. The small part activates the heating element. The second larger part of the trigger controls the smoke. Feather the large trigger to do less smoke, and pull it fully and quickly for a full puff.
Question:	does this provide enough pressure to connect to a vacuum line to find a intake leak
Answer:	No, the vapor cant easily be injected inside the line. But you can use it to puff around outside the line to see the air leak from that side.

Product features

You Talked and We Listened

We are constantly upgrading the Smoke Stick to make it the easiest, most hassle free way of detecting air leaks.

Upgrades to the Smoke Pencil ONE include a more robust battery cover with improved configuration, a green LED light to make the smoke more visible, new trigger locking mechanism that makes it less likely to activate the trigger accidentally while it is stored, better visibility on the fill / empty tank windows to read the fluid level, higher quality tighter plugs on fill and empty tank, and new fog fluid with higher glycerin content for thicker vapor with less sputtering.

You're in Control.

You control the amount of smoke this Smoke Pencil generates by holding the finger trigger, even upside down (with included cone adapter tip)! The fog comes out of the top chimney to reveal any drafts or leaks in your home, automobile, or business.

The new cone adapter also allows you to control the puff of vapor to a smaller stream of smoke, so you can pinpoint where an air leak or draft is coming from.

Light up your Space.

Find the leak even in dark spaces! The highly visible green light on the top of the Smoke Pencil ONE illuminates the area you are testing for easy air movement detection.

Fluid Included.

A 3 oz bottle of non-toxic smoke fluid made of sweet smelling water, glycol, and glycerin (similar to toy train smoke) is also included with the Smoke Pencil ONE and features a special filling tube for easy setup.

• Now with thicker vapor with less sputtering!
• Lasts 12-15 hours
• Does not use the dangerous and caustic acid or incineration based smoke that other smoke sticks often produce.

• Unique Remote Control - Supplied with wireless and wired remote control.You can control your fog machine within a 50-meter radius(No obstacles)with the wireless controller(needn’t to keep pressing to spray smoke);Or control with the 3 meters wired controller.
• Controllable Light and Visible Preheating lamp - You can turn the RGB light on/off while spraying.There are light switches on the JDR smoke machine(could not choose single color).There are still a preheating lamp on the machine's control panel.When the indicator light is red that it is warming up, green is Warm-up completed.
• Compact and portable fog machine - Built from aluminum for better heat dissipation to ensure durability and long lifespan.
• Rapid warm-up - Equipped with an advanced electronic thermostat control system and special pipeline technology, allow the machine only takes 3-4 minutes to warm up quickly.Voltage range 110-130V.And hold the FCC, CE and RoHS certified for safe.
• JDR Policy - Package include Fog machine,Wired and wireless controller，Power cord,Handle,User Manual,Operational video,90 days no reason to refund, 180 days replacement .We are always working to optimize our product quality and user experience，for any possible defective products, just contact us in time and we will try our best to solve your problem.

User questions & answers

Question:	Does this fog machine have a fan that pushes the fog out
Answer:	i have a duration and amount of fog controler on this machine works fine also a regular timer so it goes on with my lights makesure you keep checking fluid with timers i tend to forget
Question:	Can i turn on just led lights without turning on heating unit
Answer:	You have to purchase the timer separately. Otherwise, it will either require you to push the button to release OR it will cycle on its own: warm up, release, warm up, release.
Question:	How do i use this machine for disinfecting? What chemical do I use
Answer:	Did not work well for ground fog. The built-in ice compartment is way too small. Look up “ground fog” on the net. Could work for regular fog, but bigger and more expensive than a regular fog machine. I tested it, then sent it back.
Question:	How to use this machine for gym disinfection
Answer:	Yes, but I would recommend Cryofreeze indoors. Freezin fog has such a long hang time that when it warms back up and wants to rise, it will smoke out the entire room.

Product features

1.Add the fog fluid

Fill the tank with the professional fog fluid（ not included)

E.g:In a space of 40 square meters,

1.Use 1:10(Oil: Water) light concentration of smoke oil, spray for 20 seconds,the smoke disappears after 5 seconds;

2.Use 1:5(Oil: Water) medium concentration of smoke oil, spray for 20 seconds, the smoke disappears after 30 seconds;

3.Use 1:3(Oil: Water) high concentration of smoke oil, spray for 20 seconds, the smoke disappears after 5 minutes.

For disinfection, we recommend using aerosol disinfectant.

1. Add atomized disinfectant solution, mix a certain proportion of water according to the instructions of the disinfectant solution.

2.Start the machine

Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on .

There are two switches:the main switch is on the left ,the LED switch on the right

(the color of the light cannot be changed)

3.Wired remote control(Three meters long)

First warm-up need 2-3 min, when the heating is complete the light is Green,it will not be on while preheating .

It can spray 12-30s, preheating again only need 50-60s,the same spray for 12-30 seconds.

(Produce smoke while keep pressing)

4.Wireless remote control(The effective range is within 50 meters without any barrier)

First heating need 2-3 minutes,when the indicator light on the back of the fog machine or the wired remote control indicator light is green.

Press the 'unlock' button on the wireless remote controller to spray and the 'lock' button to stop

The JDR Portable 400W Smoke Machine

The JDR fog machine is a safe and qualified fog machine that produces great, thick fog as you desired.

It is ideal for creating a unique mood and enhancing lighting effects for numerous types of events.

The fog machine is perfect for both indoor venues and outdoor applications, especially for festival(Birthday, Halloween，Christmas Easter）or wedding decoration, house party, nightclub and more.

Simplify Control Operation

As a new smoke machine in 2019, it needn't complicated operation, just according to the instruction video of our operation, then the machine will be operation well.

Do not use alcohol as a consumable for sterilization; it can cause a fire when heated.

Product description

Mini Mist Maker, Mister Fogger Water Fountain Pond Fog Machine Atomizer Air Humidifier, Indoor Fountain Mister Foggers

• PULACO Mist Maker can create dense mist for your small pond or water tank in seconds, it is 100% water mist, smelless and colorless, use electro and ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, birdbath, etc. It creates a magical atmosphere.
• Mist maker cable length: 7.0 ft, (3.0 ft attach to adapter, 4.0 ft attach to mist maker)
• 【Easy to use】: Put it in the water then the mist come out and it is 24 V voltage safe design. Install the mist maker under water depth 2-2.8 inches (water level: 0.6inch between mist maker sensor and water surface)
• 【Note】 Ensure the water at high quality, use clean tap water, water quality deterioration may influence the lifetime. Please switch off the power before Movement or maintenance. Mist Maker should be fully submerged in water. Do not put your hands cover above the centre mist while it working, it may causing discomfort. Mist maker can not working continously over 8 hours.

User questions & answers

Question:	so only tap water ?? no needs special water or mineral water or fog maker liquid
Answer:	Yes, just tap water enough.
Question:	Can you keep it one one color
Answer:	No. It goes through all the colors.
Question:	What style plug is this? us or european? i just had to return one that showed a is plug but was actually a european plug
Answer:	I use it in the US, so I’m assuming it’s a US plug.
Question:	if i use it on water can my reptile is drink it ?? or the water is drinkable for other animals on a Pond
Answer:	Yes. I have one for my iguana tank and one for my fire skink. They work great for this.

Product features

Installation:

• 1. Take out the mist maker and AC/DC adaptor, connect the DC plug.
• 2. Install the mist maker under water depth 2-2.8 inches (Best working water level: 0.6inch between mist maker sensor and water surface) and plug-in the adpator.
• 3. There is a cable cap on the power cord, adjustable, thats for prevent mist gathered into water droplets, flows out and affect other devices.

Application

PULACO Mist Maker, using ultrasonic electronic technology to make the water molecules into fog molecules.smelless and colorless. Perfects for being used in your pond, botanical garden, rockery, fishtank, vase, pool.,etc. It will create a magical atmosphere. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.

Product description

Mist maker instructions

For initial use,be sure the input voltage marked on the transformer must be same as your local power supply. If not, please do not use it until get a correct transformer from your local distributor.

Place the MIST MAKER into a water container placidly, and pour into enough clean water.If the water is not enough to submerge the water-lever sensor switch, it can not generate mist;But if the water depth is too high,the mist is small or even no mist generated. Please refer to the following drawing No.2 for the best water lever. The MIST MAKER shall generate calori when it is working,the water temperature shall be rising,recommend to use it in a big volume or a good radiating water container.

Place the transformer in a drafty place,and far away moist place.

Connect the MIST MAKER with the transformer properly.

Plug the transformer into power supply and electrify,if it is correctly installed, it will start to work immediately.



PARAMETER

Limited temperature:5~40 C

Water rate:>350mL/H

Depth of water limited :45~65mm

Rate voltage :15W



Products include:

1*mist maker

1*Waterproof frame

1*power



Click on the shopping cart to make a purchase, make your Halloween different, and give your friends a big surprise.

• MAKE HALLOWEEN SMOKE.Generate negative ion Halloween smoke through ultrasound, without chemicals, creating a realistic Halloween scene.Make your Halloween party or dance more interesting.
• THE LED LIGHT CAN BE CHANGED.There are three kinds of lights, red, yellow and blue, which can change colors constantly, making your Halloween atmosphere more realistic and strange.
• PREVENT THE SPLASH OF WATER.Distribution can be detachable waterproof rack, can be very good to prevent water from running. Reduce the trouble after using.
• EASY TO OPERATE AND SAFE.Plug in the power supply and place it in a water container with 40~80mm water depth. (the atomizing effect is best when the atomizing sheet is about 30~50mm away from the water surface.)The input voltage is 24V, which is the safe voltage.
• Enjoy a safe and worry-free shopping experience. If you are not satisfied with the product, you can get a full refund within 30 days.Join your shopping cart to celebrate your Halloween day

User questions & answers

Question:	I can’t get mine to work? Is there a trick
Answer:	24 x 20.1 x 14.4 inches
Question:	Does the water splash out
Answer:	The cord is three feet long. It starts at the bottom right corner of the unit.
Question:	what size ceramic discs does this take
Answer:	Well over 8 in. If you Google it you can get specifications...
Question:	Can this be used outdoors
Answer:	The first one

Product description

Warning Tips:

1. Keep water level higher 0.8~1.2inch depth than the mist maker.
2. It will heat a bit of when using, so don’t use it in fish tank.
3. Don't touch the atomizing slice while the mist maker is working.
4. Do not turn over the mist maker when it is in working statue.
5. Please turn off the power before movement or maintenance.
6. Please don’t touch water when it works.The frequency exceeds the human body’s frequency range, so your finger may feel numbs if you touch, but please know that its. Not Electric Leakage. Our product’s voltage is 24V so it’s to use in the water.

Tips about mist maker service life:

1. Do not drop any essential oils in when using.
2. Atomizing slice is consumable, and its service life is about 3000 hours.
3. Please ensure that daily working time should be less than 10 hours, otherwise the lifespan of atomizing slice will be shorted.
4. Ensure the water at high quality, use clean water.(water quality may influence the lifetime)
5. For the good of mist make performance and service, please change clean water in every week, and use soft cloth to clean the mist maker sensor and head, and do not scratch the mist maker sensor or head with sharp tools.

Specifications:

• Material: Aluminum
• Aerosolized amount:≥400mL/H
• Input: 110-240V, 50/60Hz
• Output: DC 24V, 700mA

Package included:

• 1x mist maker
• 2x mist maker disc
• 1x key
• 1x stand
• 1x instruction
• 1x US plug adapter

• WIDELY USE - This mist maker fogger can create a thick steam effect. You can put it in Halloween cauldron, pond, rockery, vase, tank, water fountain, etc
• WATERPROOF - This mini fog maker is waterproof and its power cable is long enough. It's ultra quiet and auto shuts off when the water is gone
• THICK MIST EFFECT - Aerosolized amount ≥400mL/H. It produces a nice amount of misty fog to create a magical atmosphere on Halloween and other holidays
• NO WATER ALL OVER - A detachable stand is supplied for no water going all over
• EASY TO USE - Voltage is 24V so it can be used in the water. Plugged it in, lights come right on and the mist starts right up.

Product description

The Microporous Atomizer is mainly used in all kinds of medical micro-atomization, USB humidifier, perfume atomizer, aroma atomizer, auto parts, large atomization of high-grade toys, USB power supply desktop mini humidifier, essential oil atomizer, mosquito Perfume, various types of non-wool core humidifiers, all kinds of atomizers for beauty treatment.



How to Use It? It’s Very Easy, Every One Can Handle It.

1. Charge it with an USB power cord (DC 3.5*1.35mm).

2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards.

3. Press the key to start it. Then Enjoy Your Soft Moist Air.



Parameters:

1. Diameter: 20mm

2. Wire: 20cm

3. Operating Voltage: DC 3.7-12V

4. Frequency: 113+/-3KHz

5. Quiescent Capacitor: 3000+/-15%PF

6. Rated Voltage: 70V (max)

7. Rated Power: 2.5W (normal use 1.5W)



Please feel free to Contact Us if you have any other questions or problems, we are always here for you.

• 💧20mm diameter ultrasonic atomizer plate povides with more finer particles that your desk or other platform can be well protected against dampness.
• 💧Easy to use. After charge the frequency sweep driver board, press the key to start.
• 💧It can work well over the water's surface, absorbent sponge or towelwith more finer particles and higher spray level.
• 💧Widely used in the ultrasonic atomization devices, USB humidifier, perfume atomizer, aromatherapy atomizer and other atomization devices.
• 💧WHDTS has long been engaged in Electronics Related Products wholesale and retail business. Welcome letter to discuss the wholesale business. The bigger the amount is, the more favorable the price is.

User questions & answers

Question:	If you vary the input voltage does the volume of mist change (i.e. can you raise/lower the output by varying the voltage
Answer:	yes, it does.
Question:	Any wiring instructions? Any mounting instructions for ultrasonic transducer
Answer:	No instructions and it all depends on what you are using it for and where. It's a plug in and use...plug in disc and plug in DC power unit on to circuit board. It has an on and off push button on circuit board. I will tell you that it DOES NOT come with a power unit you will have to find one from an old DC unit that will fit it. Plus disc CAN NOT be totally submerged in water it has to be very close to the surface...almost floating in the water, in order for it to atomize. Hope this helps.
Question:	would this vaporise mineral oil to make a smoke machine
Answer:	PLEASE, do not use mineral oil for fog. There are actual products (Froggy's Fog) that are not harmful, I am not sure if this device will work with them but mineral oil should not be breathed.
Question:	If the wire/transducer part are hooked to a signal function generator could it vibrate at other frequencies or only at designed resonant frequency
Answer:	The crystal has a natural resonant frequency which the supplied oscillator matches. You can probably drive it with your own source at a different frequency, but the amount of mechanical motion of the crystal will be greatly diminished when driven off-resonance. You would need to drive with a lot more power to get the same displacement as the on- resonance case, but this will cause more heating in the transducer and may either depolarize it from excessive heat, or outright crack it. The transducer will also resonate at other multiples of the base resonant frequency and in other modes. These are typically not as efficient as driving at the lowest mode and the fundamental resonant frequency.

Product description

Mist Maker, Indoor Fountain Mister Foggers, Small Pond Fog Machine Atomizer Air Humidifier Perfect f

• PULACO mist maker can create dense mist for your pond or water tank in seconds, it is 100% water mist, smelless and colorless, use electro and ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, birdbath, etc. It creates a magical atmosphere.
• 【Easy to use】: Put it in the water then the mist come out and it is 24 V voltage safe design. Install the mist maker under water depth 2-2.8 inches (water level: 0.6inch between mist maker sensor and water surface)
• 【Mist maker cable length】: 7.0 ft, ( 3.0 ft attach to adapter, 4.0 ft attach to mist maker)
• 【Note】 Ensure the water at high quality, use clean tap water, water quality deterioration may influence the lifetime. Please switch off the power before Movement or maintenance. Mist Maker should be fully submerged in water. Do not put your hands cover above the centre mist while it working, it may causing discomfort. Mist maker can not working continously over 8 hours.

User questions & answers

Question:	I bought this in October and it quit working today. What happened
Answer:	Mine quit working about 10 days of use (we use it for our Gecko). Perhaps distilled water is the way to go?
Question:	does this unit have an auto off when the water gets low
Answer:	Yes. It does shut off when water is low
Question:	Plugged it in put in water , not working and no leds . should i use distilled water
Answer:	Distilled water is not necessary. If your Mist Maker is not working when plugged in and immersed in water, it might just be defective. We tried different receptacles for the water to make sure that the device was covered.
Question:	How can I make this stop splashing so much? The rubber “adjuster” doesn’t do much
Answer:	That I'm not sure. I'm using mine in a bowl that has an additional piece that sits over the mister, that way it bubbles up under this additional piece. So, it just drips back into the bowl. Look it up. There called misting bowls. I bought this for that bowl. My mister died. This replacement works great.

Product features

Installation:

1. Take out the mist maker and AC/DC adaptor, connect the DC plug.

2. Install the mist maker under water depth 2-2.8 inches (Best working water level: 0.6inch between mist maker sensor and water surface) and plug-in the adpator.

3. There is a cable cap on the power cord, adjustable, thats for prevent mist gathered into water droplets, flows out and affect other devices.

Application

PULACO Mist Maker, using ultrasonic electronic technology to make the water molecules into fog molecules.smelless and colorless. Perfects for being used in your pond, botanical garden, rockery, fishtank, vase, pool.,etc. It will create a magical atmosphere. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.

Product description

Theefun Fog Machine

Features with compact streamline body structure, this 400W Theefun Fog Machine can continually produce uniform, unscented and long lasting fog, ideal for enhancing lively atmosphere of live concerts, stages, parties, Pubs, balls and family entertainment gatherings. Just hide the machine in a place there it can not be seen and then click the remote to send out a blast of fog.

But do remember the following cautions before each use. 1.Always check whether there is enough fog fluid in the tank before each use to avoid danger.

2.Do not spray fog to people directly and get it far away from fire or other heat resources. Specifications

- Voltage: AC 110V/60Hz

- Power: 400W

- Tank Capacity: 300ml(0.079gal)

- Output: About 2000 cfm

- Fluid Consumption: 7.5 ml/min

- Warm up Time: 3-5 min

- Output Distance: 2-3 m

- Remote Length: 3m/9.8ft

- Dimension: 23 x 11 x 11.5 cm / 9.06 x 4.33 x 4.53 in (L*W* H)

- Weight: 4 lbs Package Contents

1 x Fog Machine

1 x Remote Console

1 x Handle

2 x Screw

2 x Gasket

1 x User Manual

• ♥【Effective Fog Spray】: Produce uniform, unscented fog very fast after a few minutes warming up with an output of 2000 CFM((cubic feet per minute) or so and 2-3 m distance
• ♥【Easy to Use】: With a wired and a wireless remote, built in power cord and the visible fluid level, you can always have direct control of your fog machine
• ♥【Durable Aluminum Body】: Aluminum body with nice heat dissipation ability, ensures durability and long lifespan
• ♥【Energy Saving and Non-toxic】: Add professional fog fluid into the tank, then it can produce non-toxic fog continually via pressing the red button on wired console when you need.
• ♥【Widely Used】: Perfect for enhancing atmosphere of Halloween, live concerts, stages, festivals, wedding ceremonies or family entertainment gatherings. Indoor use only.

User questions & answers

Question:	Is 32 oz of the liquid fog enough for the smoke machine
Answer:	I don't have a direct answer to that questions, but I do want to let you know I tried to use it outside in the backyard once, and the fog dissipated VERY quickly. It might not be good for the use you are intending. The fog doesn't necessarily lay and hug the ground. You may want to use dry ice or something if you are trying to create a misty effect in the woods. Not sure what you are trying to do. In answer to your question. A regular computer backup battery would probably work. That would give you at least 30-60 minutes of life.
Question:	What battery can I use to make this cordless, is it possible to connect to a portable battery and bring far away into nature
Answer:	NO it's for indoor use so if you use it outdoors you should make sure it's covered. The vents on it are open to the electronics and they won't take kindly to rain.
Question:	Can this be left out in the rain
Answer:	We got an hour and 45 minutes of fog heavy use
Question:	How many minutes of fog does one get after filling the tank
Answer:	The remote is wireless and can be used from a distance. I have not tried to put it on a timer because the ease of the wireless remote didn't warrant it.

Product description

Warning Tips:

1. Keep water level higher 0.8~1.2inch depth than the mist maker.
2. It will heat a bit of when using, so don’t use it in fish tank.
3. Don't touch the atomizing slice while the mist maker is working.
4. Do not turn over the mist maker when it is in working statue.
5. Please turn off the power before movement or maintenance.
6. Please don’t touch water when it works.The frequency exceeds the human body’s frequency range, so your finger may feel numbs if you touch, but please know that its. Not Electric Leakage. Our product’s voltage is 24V so it’s to use in the water.

Tips about mist maker service life:

1. Do not drop any essential oils in when using.
2. Atomizing slice is consumable, and its service life is about 3000 hours.
3. Please ensure that daily working time should be less than 10 hours, otherwise the lifespan of atomizing slice will be shorted.
4. Ensure the water at high quality, use clean water.(water quality may influence the lifetime)
5. For the good of mist make performance and service, please change clean water in every week, and use soft cloth to clean the mist maker sensor and head, and do not scratch the mist maker sensor or head with sharp tools.

Specifications:

• Material: Plastic
• Aerosolized amount:≥450mL/H
• Input: 110-240V, 50/60Hz
• Output: DC 24V, 700mA

Package included:

• 1x mist maker
• 2x mist maker disc
• 1x key
• 1x stand
• 1xinstruction
• 1x US plug adapter

• WIDELY USE - This mist maker fogger can create a thick steam effect. You can put it in Halloween cauldron, pond, rockery, vase, tank, water fountain, etc
• WATERPROOF - This mini fog maker is waterproof and its power cable is long enough. It's ultra quiet and auto shuts off when the water is gone
• THICK MIST EFFECT - Aerosolized amount ≥450mL/H. It produces a nice amount of misty fog to create a magical atmosphere on Halloween and other holidays
• NO WATER ALL OVER - A detachable stand is supplied for no water going all over
• EASY TO USE - Voltage is 24V so it can be used in the water. Plugged it in, lights come right on and the mist starts right up.

User questions & answers

Question:	Where do I get the replacement disks
Answer:	It has a ceramic disc that you clean, rather than the metal kind that you replace. The info is in the instructions that come with the unit.
Question:	What are the dimensions of the unit
Answer:	The mist maker is 1.8inch diameter and 1.2inch height. Please have a check of the 7th picture :)
Question:	Can you select a fixed color for the led lights
Answer:	Thanks for your question. But sorry you can't select a fixed color.

Product description

airDefender Mini Cordless Sanitizer Dispenser is the perfect cost-effective solution to sanitize your hands, and your belongings. Keep your loved ones and guests safe from germs with the convenience of our smart and automated mini dispenser. It atomizes all liquid water-based, and alcohol-based sanitizers, giving you a non-drying, no residue, mess-free sanitizing experience. Intelligent And Touchless Design: Reduces face-to-face interaction, avoiding germ transmission and cross-infection in home, school, and office buildings. Green Solution: Lightweight, durable, refillable, and easy to use and operate wherever you go. Powerful Battery Life: Rechargeable, high-capacity battery life for the most demanding task. Infrared Induction Sensor: Equipped with a fast infrared induction sensor giving you a no-touch - no germs experience. Motion-activated: The built-in motion sensor technology can detect your hands and will automatically shut off when not in use. One Button Secure Control: Instant one key touch button for fast, time-efficient disinfection, and more time for the family.

• ✔️SANITIZE ANYWHERE: Cordless smart infrared induction automatic hand sanitizer dispenser provides a touch-free sanitizing experience, avoid cross-infection without touching. Auto shut off achieves fast and convenient disinfection without waste.
• ✔️ QDOT ATOMIZATION: This touchless sanitizer mister works with all liquid solution, it atomizes alcohol sanitizer and water-based disinfectant to small mist and fog machine. Gel or oil form liquid spray cannot be used.
• ✔️ENERY SAVING SOLUTION: The nano mist sprayer sanitizer is great for cars, home, office, school and businesses. rechargeable sanitizer sprayer is fitted with an inbuilt lasting battery that can be recharged with a USB cable and energy-saving hand sanitizer mister.
• ✔️MESS-FREE: Atomizer allows faster drying, no residue, fuller coverage sanitization experience on your skin and personal accessories.
• ✔️MAXIMIZE PROTECTION: Sanitize your belongings such as phone, keys, eyeglasses, and other accessories with touchless hand sanitizer mister. Use airDefender patent formula for a full 24 hours defense on your skin.

Product features

airDefender Automatic Sanitizer Dispenser Atomizer - Touchless Motion-activated

• Automatic Hand Sanitizer Dispenser with Atomization - Nano Mist Fogger
• Great Gifts for your family and friends.
• Cordless Hand-free Sanitizer Dispenser Countertop with Infrared Motion Sensor.
• USB Rechargeable Lasting battery.
• Transparent Portable Size Tank 100ml.
• Sensor Distance within 7 Inch.
• Automatic Shut off - Cost-effective.
• Convenient Solution - Two hands sanitizing, stay germ-free

Innovation for A healthier Life

• Fuller Coverage
• Faster drying
• Mess-free
• No Residue

Mini Sanitizing Atomizer Dispenser

• Cordless
• Portable
• Rechargeable
• Nano Atomization
• Infrared Smart Induction
• Motion-activated auto shut-off
• 100ml Tank capacity

Quantum Atomizer Gun Sprayer

• Cordless
• Lightweight
• Rechargeable
• Nano Atomization
• Blue light precision
• 3 Adjustable pressure
• 380ml Tank capacity

Atomizer Liquid Sanitizer Solution

• Over 10+ Hours of defense on face, body, hair, and hands.
• Award-winning patent technology fights 99.9% germs.
• Deodorize body and pet odors.
• No toxic and harsh chemicals.
• Safe for family, pets, and environment.
• 150ml