10 best excell 2500 psi pressure washer pump

Product description

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 2600 psi PRESSURE WASHER WATER PUMP KIT
• Fits Honda EXCELL XR2500 XR2600 XC2600 EXHA2425 XR2625
• 2400-2600 PSI  /  2.3-2.4 GPM
• Garden hose hookup w/ 3/8" Female Quick Connect
• Fits 7/8" Short Shaft Engines 1-1/2" or less

User questions & answers

Question:	Rx2600- honda 5.0hp. d28745-477206 looks to have a 5/8 shaft. will this fit
Answer:	Don’t know just ordered pump. Pump works fine
Question:	Will this fit my devil bliss 2221scvh? Honda 4.5 motor
Answer:	Check the product spec sheet
Question:	Is a repair kit available for this pump
Answer:	Yes, this pump work on rmv25g30-ez.
Question:	Is there a warranty
Answer:	Yes, it fit Generac model 0065960.

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

• 2600 psi PRESSURE WASHER WATER PUMP
• For Honda & Excell XR2500, XR2600, XC2600, EXHA2425, XR2625
• 2400-2600 PSI / 2.3-2.4 GPM
• Garden hose hookup / 22mm Outlet
• Fits 7/8" Short Shaft Engines 1-1/2" or less

User questions & answers

Question:	Will this fit an excell xr2600 with an a14527 pump on an Honda motor
Answer:	Yes this pump only replaces the odd strap/bow tie pump on the xr2500 xr2625 xr2600 exha2425, 7/8" shaft model, thanks tony 727-858-1721
Question:	will this fit the
Answer:	It fit the 2400 perfectly. I don't know if it will fit the 2425.
Question:	Is fit excell xr2526 2.5 gpm honda 5.0 hp - gc
Answer:	If you meant the model to be "XR2625," then yes this is the correct replacement pump.ShaunaCustomer Service
Question:	will it fit karcher g2500vh
Answer:	Is pump

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• New OEM AR 2600 psi POWER PRESSURE WASHER WATER PUMP
• Excell VR2500 / EX2RB2321 Upgrade Kit
• For RMW2.5G28-EZ replacement "EZ"
• Fast Shipping by The ROP Shop
• Quality Aftermarket Part with 1 Year Warranty

User questions & answers

Question:	Does this pump come with the shaft key
Answer:	Not sure, I used it for playing sound from my Oculus quest 2 to a wireless speaker but there was too much delay in the transmission

Product description

Brand New Replacement Pressure Washer Pump!



Designed as a direct replacement, this horizontal mount pressure washer pump fits various pressure washer models in the 2400 to 3100 PSI pressure range sold by DeVilbiss, Ex-Cell, EXCELL, Porter Cable, DeWalt, and Troy-Bilt.

This is a direct drive pump with a 4 bolt gas engine mounting flange. Pump ships prefilled with oil, so no oil maintenance is necessary!

Specifications:

• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 3100 PSI
• Max. Pump Speed: 3450 RPM
• Shaft Diameter: 3/4" Keyed Hollow Shaft
• Max. Horsepower: 6.5HP
• Max. Fluid Temp.: 80 degrees F.
• Water Inlet Port: 3/4" Garden Hose Thread
• Discharge Ports : 22mm Twist Connect
• Pump head material: Aluminum
• Includes detergent inlet port and thermal release valve

This replacement pressure washer pump interchanges with OEM Technologies 8.6CAH12A, ProvenPart PPW2424H, 760999688633, Simpson 90028, 879399001482, Himore / Homelite 309515003 and 308653071

• Brand New Replacement Pressure Washer Pump! This pump interchanges with Himore / Homelite 308653071 and 308653071, Simpson 90028, and others!
• Fits many pressure washer models including Porter Cable, DeWalt, Ex-Cell, Troy Bilt, and more!
• Aluminum pump body construction! Up to 3100 PSI water pressure at 2.5 GPM!
• Pump includes thermal release valve and detergent inlet port
• Fits 3/4" engine output shafts, maximum 3450 RPM!

User questions & answers

Question:	Would this fit a powerhorse pressure washer
Answer:	No ! The description says horizontal. It is only used on side shaft engines. https://www.amazon.com/dp/B074B5CCGK?ref=myi_title_dp is the pump for vertical pipes out the back opposite the spark plug. thanks tony 727-858-1721
Question:	Will this fit troy built 020316, pump is vertical under motor and pump number is mtpv93501, fittings are opposite of spark plug
Answer:	i put it on GC 190
Question:	Will this fit a Honda c
Answer:	Yes
Question:	Does this fit a Honda go
Answer:	Some do some don't it is a 3/16 square key x1" long can pickup at most any auto parts store

Product description

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two - 5/16" 18 x 2 1/2" , One - 5/16" 18 x 3 1/2"

 

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 2800 psi PRESSURE WASHER WATER PUMP
• Fits Excell Devilbiss VR2522 VR2320
• 2500-2800 PSI / 2.3 GPM
• Fits 7/8" Shaft Vertical Crank Engines
• 22 MM x 14 MM Hose Connection

User questions & answers

Question:	Does this come with the thermal valve
Answer:	I do not know about this brand. Mine is a Troy Bilt.

Product description

BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS. Specs:2800-3000 PSI / 2.4 GPM - MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4" SHAFT HOLE DISTANCES ARE 2 5/8" CENTER TO CENTER ON OUTER HOLES / 1 7/8" FROM CENTER SHAFT HOLE TO EACH OUTER HOLE. **Fits Honda Excell units with 3/4" shaft only!!! Some Excell units have the 7/8" shaft and this pump will not work!** UNIVERSAL PUMP - FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE

• BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS
• Specs:2800-3000 PSI / 2.4 GPM - MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4" SHAFT HOLE DISTANCES ARE 2 5/8" CENTER TO CENTER ON OUTER HOLES / 1 7/8" FROM CENTER SHAFT HOLE TO EACH OUTER HOLE.
• **Fits Honda Excell units with 3/4" shaft only!!! Some Excell units have the 7/8" shaft and this pump will not work!**
• UNIVERSAL PUMP - FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE

User questions & answers

Question:	Is this pump compatible for exph2225-hd
Answer:	I bought a Power Care Model AP31030B 3/8 in. Female Quick-Connect X M22 Connector at Home Depot for $9.97. Works great.
Question:	i've got the pump, but i'm having a hard time trying to find a female m22 to 3/8 quick connect, any ideas? old qc part was 3/8 to
Answer:	https://www.amazon.com/dp/B01E7WF4IE is a better choice. 3000 psi model may bog down and stall 5hp engine. thanks tony
Question:	With a exh2425 excell with a gx160 5.0 honda engine woud this fit
Answer:	Hello! Thanks for the inquiry. Generally for 160 we recommend something with less psi. This pump would most likely bog your engine down. Leah Customer Service
Question:	does a Honda GC160 have enough power to run this
Answer:	I don't think so

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

• 3000 PSI with Brass Head
• Fits 3/4" Horizontal Crank Engines
• 2.4 GPM - Maximum 2.5 GPM factory rating

User questions & answers

Question:	need washer pump for craftsman model 580752070 with 7/8 shaft do you have it
Answer:	it may you can call them to make sure
Question:	Will this pump fit a Troy-belt
Answer:	If you have a vertical(under the engine) mount then this pump will not work, You need a https://www.amazon.com/dp/B00LWAQCYK if your hose connections are opposite the spark plug. Although this model you clicked on looks like your old pump it only works on horizontal engines thanks 727-858-1585
Question:	Will this for the troy-bilt briggs & stratton 020316 model
Answer:	My understanding is you have a vertical engine with the pump mounted under the engine with the connections coming out the back if that is so there is a way for this to mount using the holes holding the engine to the frame. Unfortunately it is not a direct fit but it is used in the interest of saving money and getting a better pump. The OEM would fit the way the old pump did but will cost more$$$ thanks tony. The question of this pump clicked on was asked. This one will bolt up but absolutely not work.
Question:	No way possible that the pump at https://www.amazon.com/dp/b00lwaqcyk will ever bolt to the troy-bilt briggs and stratton 020316 gas pressure washer
Answer:	I bolted it by drilling another hole. Works fine
Question:	I bought this pump but my old pump has 4 mounting bolts vs 3..i mounted the new pump but there is no locling pin or bolts that came with please help
Answer:	I put it on a Honda engine. So I’m not sure if it would fit the vr2500.
Question:	will this fit the brigs and stratton vr
Answer:	Yes. Bolts right up

Product description

Brand new replacement for all 2 piston radial bow tie strap pumps that are mounted on horizontal engines. Easy installation and ready to use with oil, quick coupler and thermal relief valve already installed

• New PRESSURE WASHER PUMP fits Honda Excell XC2600 XR2500 XR2600 XC2600 EXHA2425 XR2625
• Fits the 7/8" shaft diameter, Only Honda Short Shaft Horizontal Engines for Excell,
• Quick connect adaptor included - connect quickly to high pressure hose
• Includes hardware kit ( Bolts, Lockwashers, Spacers Shaft Key) and Instructions
• Garden hose hookup / Thermal valve/ Chemical injector included

User questions & answers

Question:	What’s the red knob/part of the pump called
Answer:	It should fit. I put mine on a five horsepower Honda GX160. I have to assume that yours is probably the same engine. It's the one that goes onto Pressure washers.
Question:	Will this pump fit on a XR2500 with Honda engine
Answer:	No ! Not the right pump, will not fit. You need the https://www.amazon.com/dp/B00N6RVQZ2 Be sure to purchase from Pumps-n-more. We are currently sending all new mounting hardware, shaft key. thermal relief valve , quick disconnect and a set of wand tips. We also have a call number available 7 days a week for support if needed. thanks tony 727-858-1721
Question:	Will this fit my honda 5.0 / excell, model exh2425 2400psi, 3/4 shatf
Answer:	Yes this will replace that odd bowtie strap pump that has the plastic cover. This is a special model that has the sight glass drain plug and a sturdier mounting flange. Be sure to purchase from Pumps-n-more to be sure you are getting this model with new mounting hardware abd quick disconnect socket for your high pressure hose. thanks tony 727-858-1585
Question:	is this direct replacement for EXHA 2425 pressure washer
Answer:	This one you clicked on will not fit vertical engines. We only have the 3 post pumps for vertical engines. be sure to buy the one that has the hoses connecting on the same side as your current pump. These pumps have specific directions. They come with kit to mount on vertical engines. thanks tony

• QUALITY THAT LASTS - 2800-3000 PSI and 2.5 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!
• EASY START - Horizontal Pump Fits Most 3/4" Shaft Power Washer Horizontal Engines (Best results 196cc - 212cc) With Our Pump You Can Get More Out Of Your Pressure Washer!
• BETTER THAN OEM - Fits 3/4" Shaft Horizontal Pumps - High Quality Replacement Pump For Your Pump. These Are OEM Replacement Pumps For Many Models of Pressure Washers. If Your Old One Stopped Working, Is Corroded etc. Don’t Hesitate!
• DOES IT MATCH YOUR MACHINE? - Our Pump Comes Standard With A 3/4 Inch Shaft Which Is Most Common For Small Horizontal Pressure Washers. (5 HP to 8 HP) - Shaft Depth: 2 5/8" - Hole Distance to hole - 2 5/8" Keyway Size: 3/16" - DOES NOT FIT 7/8" Vertical/Bottom Shaft Pumps.
• PARTS COMPATIBILITY - Homelite: 308418007, 309515003, 308418004, 308653078, 308653093, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ✔ Karcher: G3050OH, K2400HH, G2400HH. PowerStroke: PS80522, PS80903B, PS80903A. ✔ Generac: 308418007, 01675, 01675-0. ✔ Troy-Bilt: 020242-02, 020242-04, 020241, 020241-1, 20242. ✔ Simpson: MSH3125, MSH3125-S. ✔Honda: GC190, GC135, GX140, (GC160w/ 3/4 Inch Shaft) - Message Us To See If Yours Fits!

User questions & answers

Question:	Will this pump match up to the Craftsman
Answer:	Yes but verify the shaft is 3/4 inch diameter and has a 3/16 slott for lock key and the 4 x 2 1/2 inch on center mounting holes pattern for your motor.
Question:	Will this pump fits honda gc
Answer:	Yes! As long as your Honda G160 has the standard 3/4" shaft and 4 mounting bolts (in a square).
Question:	When will my order arrive? I ordered it almost 3 weeks ago and it still hasn’t arrived? Please advise
Answer:	its lost in transit or out of stock .....get a refund or claim or another replacement
Question:	if this does not fit my craftsman model580.767303 PW can i send it back? my engine shaft is 3/4" with a 3/16 groove for keyway and hole patter
Answer:	First yes you can send it back IF ---, not this is the right thing 100% YES IF you use the Amazon program. Amazon is the very best for customer service. Second - it will fit. There may be a slight difference in the distance from the pump to your engine -- but if it fails to fit and the shaft is too long - judge the distance and put the appropriately sized washers on it. If all else fails you have up to 30 days to return it. I pay a little extra for Amazon because even if the seller takes off - Amazon makes it right - every time now for years

Product features

Horizontal Engines with 3/4" Shafts ONLY

1. FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
2. Shaft Depth: 2 5/8"
3. Hole Distance to hole - 2 9/16”
4. Keyway Size: 3/16"

PEGGAS Pump Measurements

• Height: 7 1/2" (Inches) tall
• Width: 5 5/16" (Inches) wide

PEGGAS Pump Measurements

• Length: 8" (Inches) Length

PEGGAS PW28/2.5 Technical Specifications Sheet!

Fits many models:

• Homelite 308653057, 308418007, UT80522, UT80953, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300 - Powerstroke 30841800, PS80522, PS80903A, PS80903B - Delta DXPW3025 - Karcher MH5500H-1 M5500H-2 M5500H-3 , Karcher G3050OH - Generac 308418007 HL252300, Generac 01675, 01675-0, 1675, 1675-0, G24H - Troy-Bilt 020241, 020242, 020241-0 - Comet BXD2528, BXD2527G - Craftsman 580.752600 580.752601 - Generac AXD2524GT-22MM, AXD3025G - Simpson MSH3125, MSH3125-S - Annovi Reverberri SJV25G27D-F7-EZ, AR MV25G30D - OEM Technologies FNA520002 (SIMPSON 520002) - AR North America RMV25G30D-PKG, RMV25G30-EZ-PKG
• Engines: OEM Himore 309515003 Engines, Honda GC160 Type P, Honda GC190
• AND many other models.

(Does Not Fit Excell engine's w/ 7/8" shaft )

1. THIS PUMP IS EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
2. Shaft Diameter: 3/4" Keyed Hollow Shaft

• THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE w/ 3/4 Shafts, NOT A 7/8 SHAFT & NOT VERTICAL ENGINES. Models stated in the listing are potential matches only and NOT a 100% confirmation of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4 shaft only!!! Some Excell units have the 7/8 shaft and this pump will not work!**

Learn More About The PEGGAS Horizontal Pump With Our Diagram!

• FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
• Discharge Ports : 22mm Twist Connect (High-Pressure Hose)
• Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
• Comes with Built-In Unloader
• Built-In Chemical Injector
• Comes with a FREE Thermal Relief Valve

3/4 Inch Horizontal Shaft!

• PUMP SPECIFICATIONS:
• Type: Axial
• Head Material: Aluminum
• Engine HP required: 5.5 HP (Minimum)
• Max. Water Supply Temperature: 104°F
• Self-suction: Yes
• Pre-Oiled Ready to go!

3/4" Inch Horizontal Shaft Pump Mounted!

• When installing, please ensure that the keyway is installed before running your pressure washer.
• Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!

3/4 Inch Horizontal shaft pump in ACTION!

1. Max. Volume: 2.5 GPM Max.
2. Pressure Output : 3000 PSI Max.
3. Pump Speed: 3450 RPM

• Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!

PEGGAS

Product description

Pressure Washer Pumps Replacement Type: Horizontal

Pump Head Material: Aluminium

Power Washer Pump Material : Aluminium

This Pressure Washer Pump Fits Horizontal Axial 3/4" shaft engines

Power Washer Pump Max Pressure: 2000-3000 PSI

Max GPM: 2.5 GPM

Engine HP required: 6.5 HP Max.

Max Water Supply Temperature: 104°F



Thermal Relief Valve, Key Stock and M22 hose connectors are all included



WHEN MOUNTED, the inlet and outlet will point in the OPPOSITE DIRECTION as the spark plug.

Most domestic water pumps only have a service life of 60~80hr，our power washer pump made it of Traditional Upgraded Technical Surfacing Piston and Bearing, Durable Seal, Upgrade Running Time Up to Rated 100hr and Max to 300hr.

If you have rich knowledge and experience in unloading the valve, you can adjust the pressure to 2000 psi through unload valve. Our factory setting for power washer pump pressure is 2400 ~2500 PSI . You can adjust the unload valve clockwise to a maximum pressure of 2900 PSI, otherwise adjust the valve counterclockwise to a minimum pressure of 2000 PSI.

NOTE :

We encourage all customers to fully review the information in this listing prior to purchase. Nothing is worse than having to return a product. If you are unsure whether or not this is the correct pump for your pressure washer, please ask us. If you seek assistance we would know as much of the following information as possible: Model Spec and/or Type Number Code and/or Serial Number /Year.

Our knowledgeable product specialists are always willing to help you verify product fitment. Please send us email and messages. We will reply you within 24 hours. And we would like to hear from your voice by messages to improve our production and packing ! Thank you so much for your suggestions !

• Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway
• Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models
• Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Nothing is worse than having to return a product. Let’s work together to avoid this !
• Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock
• EZJOB pressure washer pumps promise 48 Hours Pre-Sale and After-Sale Service. The mounting flange provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, or send us pictures, we would like to service you.

User questions & answers

Question:	The serial number on my old pump is 0000147202. Will this pump work with my Excell
Answer:	closed system,no need to worry
Question:	What weight oil does the pump use
Answer:	Standard yard water hose
Question:	What size hose connection on the power washing hose
Answer:	Mine is 3/8”to 1/4” Can get couplers at any hardware
Question:	which pressure hose quick connect coupler does this take
Answer:	Pretty sure it is where to add oil. Most come pre-filled.

Product features

EZJOB-High Pressure Washer Pump

Pressure Washer pump Spec: Power Washer Pump Max Pressure: 2400-2800 PSI

Pump Head Material: Aluminium

Max GPM: 2.5 GPM

Engine HP required: 5.5-7 HP Max.

Horizontal Pressure Pump COMPATIBILITY:

#Homelite:UT80522,UT80522B,UT80953,UT80953A,UT80522A,UT80953B.

30841800,308418007, 308418004, 308653078, 308653093, 308653057, 309515003,

# Karcher: G3050OH,G2400HH, K2400HH # Himore 309515003, GC190 # PowerStroke: PS80522, PS80903A, PS80903B,

# Generac: 308418007, 01675, 01675-0. 1675, 1675-0, G24H # Troy-Bilt: 020241,020241-0, 020241-1, 20242, 020242-02, 020242-04

# Simpson: MSH3125, MSH3125-S. # Honda:GC135, GX140, GC190, GC160. # Craftsman 580.752600 580.752601

And other types of models. If you are not sure if your pressure washer would fit, please ask us via contacting ' Amazon Seller'.

Attention: NOT fit Vertical engines of gasoline pressure washer

> Excellent performance: The powerful pressure washer pump is able to generate 2400 to 2800 PSI with a 2.5 GPM flow rate for tackling tough dirt and debris, which make your job more efficient!

> Highly adaptable: Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman.

Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway

This is the horizontal washer pressure pump, only fit horizontal engine.

It can fit around 2400-2800 Psi, 5.5HP-7HP.

You need to make sure if your former pressure pump is 3/4'' shaft size or not. If yes, then it fits.

HOW TO INSTALL? Pressure Washer Pump Installation Steps

Put the keyway board into the groove, and then slowly install the pump into the pressure washer machine.

NOTE: Please do not hit it violently, or keyway will be broken.

Horizontal Water Pressure Washer Pump 3/4'' Shaft Size

Pls maker sure if your Pressure Washer support the horizontal or vertical pressure washer pump. This is the horizontal Horizontal Washer Pump with 3/4'' shaft size.

Pressure Washer Pump Thermal Relief Valve

The pump comes along with the Thermal Relief Valve. This Valve can protect pump from overload. Usually this pressure washer pump can run around 3 years!

Powerful Performance 2400-2800 psi

This high pressure horizontal washer pump can run aound 2400-2800 psi, 5.5-7 hp.

After-sales Service

We care every user experience so much and hope every dear customer has highly satisfaction with this horizontal pressure pump.Sometimes something is inevitable, while we promise every customer with our sincere service. If you have any after-sales questions, no mater what it is , pls let us know! We handle your feedback as soon as possible.