10 best costco high pressure washer

• ★【Special Improvement】We provide a 1/4 inch standard extension rod, which can increase the length of the gun body and clean the hard-to-reach places.In addition, the gun body has a safety trigger lock to prevent accidents during use.
• ★【Excellent Design】Five colored nozzles have different spray angles (0 °, 15 °, 25 °, 40 °, soap spray mode). Choose the nozzle that fits your needs. Such as watering flowers, washing cars, cleaning the roof.
• ★【Connection Prompt】If the hose has a M22-14mm connector with an inner diameter of 14mm, it can be connected directly to the hose. If the hose has a 15mm M22-15mm connector, we have provided a brass connector to connect the gun to the hose.
• ★【Attention】The maximum pressure is up to 5000 PSI. The maximum flow is 8 GPM. Maximum water temperature is rated at 60°C/140F. Not suitable for water pipes and garden hoses.
• ★【Quality Assurance】We offer a 3-year product warranty. If you encounter any problems during use, please contect with us in any time. We will provide you with the best service.

User questions & answers

Question:	is this the same gun as the tool daily deluxe model
Answer:	I'm not sure what that is but if you don't buy the adapter you can't plug it into the gun F you by the washer any instructions they tell you about this adapter I don't know why they do that they should put it right in where it cost $8 but it works very well
Question:	What do you mean by this statement: Not suitable for water pipes and garden hoses
Answer:	I don't know what this means unless it is referring to the fact that you cannot connect the gun directly to a garden hose as the fitting is one for a power washing and not a hose. It probably would not work well with a hose, as pressure would be inadequate.

Product features

Package Includes

-1 X High pressure washer gun

-1 X High pressure washer extension wand

-1 X 7 Inch Extension 30 Degree Curved Rod

-5 X Pressure washer nozzle tips

-1 X M22 male NPT brass joint

-4 X O-rings

Specification

1. Max Temperature of water is rated to 60℃ / 140 F.

2. High pressure: up to 5000 PSI.

3. 1/4 inch standard quick connector.

4. Material: High-quality brass, wear-resistant stainless steel, engineering plastics.

Tips

Not suitable for water pipes and garden hoses.If the hose has a M22-14mm connector with an inner diameter of 14mm, you can connect it directly to the hose. If there is a 15mm M22-15mm fitting on the hose, we provide a brass fitting to connect the spray gun to the hose. Wrap the fluoro tape when connecting to prevent leakage during use.

Product description

Replacement Water Spray Gun for Some of Black Decker Portland Pulsar Husky Electric Pressure Washers

• Option A: Water Spraying Gun 1 pc
• Option B: Water Spraying Gun 1 pc; Jet Lance 1 pc; Turbo Lance 1 pc
• Max Pressure: 2320PSI
• Produced according to the original gun standards, 100% compatible with these brands of pressure washer.
• Compatible with: Pulsar, Portland, Husky, Ford, Black & Decker 10BLE-010, 11BLE-105, 11BLE-325, 12BDE-170, Sun Joe SPX6001C-XR electric pressure washers

User questions & answers

Question:	Does it fit a Powerstroke PS
Answer:	The pink color is Jet Stream Tips ,Soap mode The blue color is Jet Stream Tips, Rinse mode
Question:	Is this item compatible with Portland electric 63255 power washer to include Portland's wands...I still have those in working order
Answer:	Yes, they are universal nozzles and coupler. If you have 1/4 inch quick connect socket, they fit well
Question:	is this compatible with black and decker electric model 12BDE-190 1900psi
Answer:	If your pressure washer is 3300 PSI and 3.3 gallons per hour, it request 3.5 orifice. Pink and blue nozzle has orifice 3.5 . They work with your pressure washer. The other 5 nozzles has orifice 2.5 orifice, which will limit the power of your pressure washer.
Question:	will this fit a Husky 1800S
Answer:	I'm using a troybuilt power washer, but I think the fittings are universal for power washers

Product features

Option A:

• Water Spraying Gun 1 pc

Option B:

• Water Spraying Gun 1 pc
• Jet Lance 1 pc
• Turbo Lance 1 pc

• NOT for water hose or garden hose. Package include: One gun handle, 15 inch gun, 16 inch extension wand, 5 nozzles, M22 14mm female to M22 15mm male connector, M22 14mm female to 1/4 inch quick connector and 5 O-rings
• Attention: This product is only suitable for high-pressure washers and high-pressure water hose, NOT FOR WATER HOSE or GARDEN HOSE. There is a safety trigger lock in the place of the gun to prevent accident
• If the hose connector is M22 with an inner diameter of 14 mm, connect directly. If the hose connector is M22 with an inner diameter of 15 mm, use the brass connector to connect the gun and the hose, otherwise it may cause Leakage.
• Hourleey high pressure washer gun is available in 3 lengths: 40", 25", and 9". It can be connected to any product with 1/4 quick connector, such as: nozzle, rotating nozzle, undercarrier cleaner, surface cleaner, extension wand ect.
• NOT for water hose or garden hose. This product contains 5 nozzles, the nozzles have different angles (0, 15, 25, 40, 65), allowing you to choose nozzles with different angles according to your needs

User questions & answers

Question:	Will this work with my 3300 psi pressure washer
Answer:	I have a Simpson pressure washer and the tips are the same
Question:	Is it compatible with green works
Answer:	The tip, in general, inside the connector, corresponds to the point that is in the center of the plug. The ring is the short connection stans a side, inside the plug.
Question:	Will it work with Honda 2600 pressure washer
Answer:	Yes. Wire one wire to the tip (the end of the plug) and the other to the sleeve, the back part. Either leave the ring unconnected, or connect it to the sleeve. If wiring two for stereo, make sure that in each case the same wire goes to the same terminal on the plug.
Question:	What orifice size are the nozzle tips
Answer:	YES

Product features

NOTE: NOT FOR WATER HOSE or GARDEN HOSE.

Attention: This product is only suitable for high-pressure washers and high-pressure water hose, NOT FOR WATER HOSE or GARDEN HOSE.

Adjustable Pressure Washer Gun

Adjustable length: 8.8 inch, 25 inch, 40 inch

Fit for Hourleey Pressure Washer Surface Cleaner

Fit for Hourleey Pressure Washer Undercarriage Cleaner

Product description

Twinkle Star Pressure Washer Adapter Set Quick Connect Kit, TWIS291

M22-14 swivel + 3/8" plug, 3/8" QD + M22-14 male

Max. Working Pressure: 5,000 PSI

Provides secure and quick fittings, simple to assemble and disassemble

For use on gun, hose, pump to converts the M22 thread-on couplings to a 3/8" quick connector

Compatible with most M22 and quick-connect fittings on pressure washers



Note:

SELL 14mm FITTING. Before Ordering, please confirm that you need 14mm or 15mm fittings, if your washer tool is 15mm, please do not buy Twinkle Star 14mm fittings, otherwise may cause leakage.

satisfaction guaranteed. If you have any problems, please feel free to contact us.

• M22-14 swivel + 3/8" plug, 3/8" QD + M22-14 male
• Max. Working Pressure: 5,000 PSI
• Provides secure and quick fittings, simple to assemble and disassemble
• For use on gun, hose, pump to converts the M22 thread-on couplings to a 3/8" quick connector, Compatible with most M22 and quick-connect fittings on pressure washers
• SELL 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce , Simoniz with M22 15mm fitting.

User questions & answers

Question:	I bought a 3/8 50ft hose for my Ryobi 1600. Wondering if it will fit on the pressure washer with these quick connects
Answer:	Some conditions need to be confirmed before answering your question. What’s the diameter of the pipe, is it rigid or corrugated and what is the psi of your pressure washer. I was using a 3000 psi in a 4” corrugated tile and worked very well. I also used it feeding it through a downspout and into a 4” corrugated tile for distance of about 60’ and worked very well. The higher the psi of the pressure washer the better it pulls itself through the pipe. Also have to consider how many and how tight of bends you have in the pipe. Hope this helped to answer your question or at least give a little more insight on what you need to consider. Worked great for me under my conditions.
Question:	Does this work with greenworks pressure washer and greenworks hose
Answer:	Yes use a coupler to join the hoses together
Question:	Will it fit a powerstroke 3100 psi powered by Honda washer
Answer:	Yes,it'll work. This sewer jettter kit can withstand up to 5800PSI pressure, please rest assured to use
Question:	Does the M22 Male have a 14mm inside diameter
Answer:	Please contact the seller, they provide very good service, the email is attached to the manual, they reply quickly, I am very satisfied.

• Considerable amount: 2 sizes each 25 pieces replacement o-rings sealing ring inside fittings for 1/ 4 inch, 3/ 8 inch and M22 quick connect coupler
• 25 Pieces small O ring size: outside diameter: 14.0 mm; Inside diameter: 9.2 mm; Designed fitting for 1/ 4 inch and M22 quick connect
• 25 Pieces large O ring size: outside diameter:17.1 mm; Inside diameter: 11.8 mm; Designed fitting for 3/ 8 inch quick connect
• Water saving: save water by reducing your leaks due to good quality O ring, and they are replacement O-rings fit many pressure washer wands, hoses, and quick connectors. Note: please check your O-rings size before buy it
• Good quality: made of NBR rubber with tear and abrasion resistant; Compatible with many connectors and cleaners, suitable for cold and hot water pressure washer

User questions & answers

Question:	Does the M22 o-ring fit both 14mm and 15mm M22's
Answer:	If your engine has the foot print as the Honda 13 HP engine than you will be fine.
Question:	Do they stretch
Answer:	Yes it will work with a 212 predator This is a really nice mounting plate Looks cool too
Question:	I am looking for o-rings for the wand of a subaru ea190v power washer. i believe the subaru may be made by powerstroke. wil these work
Answer:	This skid plate can fit up to a Honda GX200, so it will not work for a GX620 series engine.
Question:	Is this high temp resistance
Answer:	No it is for the 120,160, and gx200.

Product description

Power. Performance. Versatility. The Pressure Joe SPX3000 electric pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment and more. Packed with an 1800-Watt/14.5-amp motor, the Pressure Joe SPX 3000 generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power. Remove tar and grease from concrete, heavy mildew stains, oil stains, rust from steel, caked mud on equipment, and other stubborn gunk and grime. Equipped with a dual detergent tank system the Pressure Joe SPX3000 carries and stores two different types of detergent simultaneously in its two .9L onboard removable detergent tanks. Conveniently switch between different detergents with its detergent selection dial and blast away all sorts of grime. Its 34-inch extension spray wand and rear wheels provide easy maneuverability and access to hard-to-reach areas such as 2 story buildings and the undersides of the automotive vehicles and lawn equipment. Tailor the pressure output of the spray to your cleaning needs with Pressure Joe's five quick spray nozzles. Other features include: 20 foot high pressure hose, 35 foot power cord, garden hose adaptor, and a TSS (Total Stop System) trigger that automatically shuts off the pump when the trigger is not engaged. Voltage 120 V ~ 60 Hz

• Power Source Type: Corded-Electric

User questions & answers

Question:	Can a professional foam lance be attached to this
Answer:	Yes! The Professional Foam Lance (MTM Hydro) comes with both 1/4'' quick connect and M22 fittings. You can either attach the Lance to the end of the extension bar with the 1/4" quick connect, or at the end of the gun with the M22 fitting.
Question:	Is the pressure sufficient for (1) cleaning vinyl siding and (2) cleaning mildew off a large wooden deck
Answer:	1. yes, but only for about 1 story without ladder. you need to be 4-5ft away2. yes, worked great on reclaimed hardwood to remove grime and mildew. You need to go very slowly with a narrow angle nozzle 3-4inches from the surface. The cleaned strip is narrow so it takes a while to do a large area. That being said, you'll get the job done and I am not sure any pressure washer will make a job like that really quick, just much easier than hand scrubbing.
Question:	Sun Joe SPX3000 pressure washer: I read that you need soap designed to run through the pump. Have you found a brand of soap that is OK for this
Answer:	According to company website: "Your Sun Joe Pressure Joe SPX3000 has a downstream chemical injector, installed on the outlet (discharge) side of the pump, that applies detergent with the dedicated soap nozzle. The advantage of the downstream injector is that the chemicals cannot cause damage to the pump system. In upstream injectors, the chemicals run through the pump, causing the pump seals to wear out."So if you use soap, it doesn't run through the pump. I would still be careful what you use and maybe dilute it to help prevent damage.
Question:	What makes this one so much better than the AR Blue Clean that's $45 cheaper? (Besides psi
Answer:	The Sun Joe has brass fittings on the water connectors which makes it more substantial and less likely to leakethan plastic fittings. Does the AR Blue Clean have brass fittings now?

Product features

You Name It, You Aim It, Grime Is Gone

THIS ELECTRIC PRESSURE WASHER GETS YOUR DIRTY WORK DONE. The Sun Joe SPX3000 pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment, and more.

OUR BEST-SELLING PRESSURE WASHER, THE SPX3000 COMBINES POWER, PERFORMANCE, AND VERSATILITY. The Sun Joe SPX3000 electric pressure washer generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power.

Dual Detergent Tanks

Two 0.9 liter onboard, removable tanks carry and store different types of detergent to simultaneously tackle different cleaning projects.

Safety Lock Switch

TSS (Total Stop System) trigger – automatically shuts off the pump when trigger is not engaged to save energy and prolong pump life.

Accessories

Includes two 30.4 ounces (0.9 liter) removable detergent tanks, 34 inch extension wand, 20 foot high pressure hose, 35 foot power cord with GFCI protection, garden hose adapter, needle clean-out tool, 5 quick connect spray tips.

SPX-25H

25 Foot Universal Pressure Washer Extension Hose for SPX Series and Others.

SPX-PCA10

10-Inch Surface, Deck, Patio Cleaning Attachment for SPX Series Pressure Washers.

SPX-RB1

Rotary Wash Brush Kit For SPX Series Pressure Washers.

SPX-TSN-34S

Quick-Connect Turbo Head Spray Nozzle.

Product description

Whether you’re looking for a replacement part or an accessory to enhance your cleaning experience, SIMPSON has the right one for you! Our accessories provide more cleaning options for the homeowner and professional to get the job done effectively while efficiently. Our accessories are designed to fit most gas pressure washers.

• Threaded M22 male connection
• Double seal system prevents water leaks
• Thermal relief protection to prevent the pump overheating
• Maintenance-free crankcase manufactured from fully anodized die cast aluminum for protection against corrosion sealed to prevent contamination along with lube failure
• Gas engine flange fits most engines
• Designed to fit most makes and models of cold water gas pressure washers horizontal engines with 3/4" shaft

User questions & answers

Question:	will this fit a troybilt 020208-01 2600 psi 2.5 gpm 5.0 honda engine
Answer:	I have a Honda GX200 6.5hp horizontal shaft engine and in fit with no problems in less than 10 minutes
Question:	I have a generac 2.4 gpm, 2800 psi washer. the downstream injector is out so i think i might replace the whole pump, will this fit? thanks
Answer:	Hello, we will need the exact model to verify. Please reach out to our customer service number at 877.362.4271. Thanks!
Question:	Will this work on my craftsman 3000 psi model
Answer:	Hello, no the 90028 is a horizontal pump, the 90026 should fit. Thanks.
Question:	Will this pump fit a craftsman 580.767200 pressure washer
Answer:	No

Product description

Generac 6684 3000 PSI Pressure Washer Gun Kit• Pressure Washer gun with M22 connection• 18 inch chrome plated wand with 0 Degree-60 Degree variable spray nozzle• 1/4 inch by 25-Foot PVC hose rated to 3000 PSI• Compatible with most brands

• 18 inch chrome plated wand with 0 Degree-60 Degree variable spray nozzle
• Pressure Washer gun with M22 connection
• 1/4 inch by 25-Foot PVC hose rated to 3000 PSI
• Compatible with most brands

User questions & answers

Question:	Do i need washer spray nozzle tips to use it
Answer:	It comes with an adjustable tip.
Question:	I have an old generac model 1292-0 2300 psi. will this work wth that model and if not do you have one that will
Answer:	Hello,My name is Anna and I will do my best to assist you today. It looks like this product was part of a line manufactured by Briggs and Stratton. Briggs and Stratton manufactured products under the “Generac Portable Product” line a while back with several different branded engines such as Honda, Subaru, Mitsubishi, Tecumseh, Briggs, and Generac. It can be confusing, so we’re sorry for any inconvenience. Here is the number to reach their customer support department: 1800-274-4477 To make it quick and easy, please indicate this is a Briggs and Stratton product when prompted. They should be able to provide any information you need for that product.If you’d prefer, you can also find manuals and dealer information for this product on their website: http://www.briggsandstratton.com/us/en/support/manuals/results?NTT=09802-01We’re sorry for any confusion, but hope this points you in the right direction. You may also contact the parts distributor; Ordertree at: www.ordertree.com/generac Ordertree carries parts for both Briggs and Stratton and Generac Power Systems, Inc. and they may be able to help you locate parts information.Thank you again for contacting Generac.
Question:	Will this fit generac model g24h
Answer:	I think so, but was not satisfied with tip design on this wand. My original wand broke where the pipe with the tip connects to upper portion of the wand. Was able to screw the original pipe with the top into the upper portion of the wand.
Question:	will this wand work for 1600 psi electric washer
Answer:	The 6684 pressure washer kit will work with a pressure washer up to 3000 PSI using M22 connections on the pump.

Product description

Pump is rated for 2800-3100 PSI at 2.3-2.5 GPM. | | | SPECIFICATIONS - Compatible with 7/8 Shaft Vertical Crank Engines, Thermal Release Valve Included, Brass Head, Rated 2800 - 3100 PSI @ 2.3-2.5GPM, 22 MM x 14 MM Hose Connection. MOUNTING - ***Note: For some models, spacers and longer bolts may be required for mounting the pump to your engine (not included)*** Common sizes usually needed are 5/16-18 x 2 1/2" and 5/16-18 x 3" hex Head bolts. ***PLEASE DOUBLE CHECK YOUR SPECS BEFORE PURCHASING, MOUNTING BOLTS & KEY WAY ARE NOT INCLUDED***

• This pump has an upgraded brass head. This brass head upgraded commercial long- life pump will give you 400 more PSI than your standard pump.
• Note: For some models, spacers and longer bolts may be required for mounting the pump to your engine (not included)
• Common sizes usually needed are 5/16-18 x 2 1/2" and 5/16-18 x 3" hex Head bolts.
• ***PLEASE DOUBLE CHECK YOUR SPECS BEFORE PURCHASING, MOUNTING BOLTS & KEY WAY ARE NOT INCLUDED***

User questions & answers

Question:	will this replace my Troy Built 2,700psi Briggs 7.75 pressure pump mtpv
Answer:	Oh yes, installed in minutes and works like new!!!...no complaints.
Question:	come with oil
Answer:	Purchased the pump and bolted it on. That was all. Works fine.
Question:	How can i find out if this will work with my simpson model msv
Answer:	This will fit a MSV3024. Note: For some models, spacers and longer bolts may be required for mounting the pump to your engine (not included) Common sizes usually needed are (2) 5/16-18 x 2 1/2" and (1) 5/16-18 x 3" hex Head bolts. Please check the description for more specs.

Product description

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 3100 psi Upgraded PRESSURE WASHER WATER PUMP
• Fits Simpson MSV3024
• 2800-3100 PSI / 2.3 - 2.5 GPM
• Fits 7/8" Shaft Vertical Crank Engines
• 22 MM x 14 MM Hose Connection

User questions & answers

Question:	Is this a replacement for Simpson model # 7104477 Vertical pump
Answer:	Not sure of the model number but I replaced my pump an a Simpson model 2700 psi with this 3100 pump that comes preset at 2900 btw. You can set it to 3100 as well maybe a little higher. But I’ll tell you it absolutely ungraded my pressure washer. It kicked butt. You can call the company that is selling it to ask the model number it fits. They were great when I called to see if it fit mine. Hope this helps.
Question:	will this fit a Simpson 3000psi 2.4gpm purchased at Costco
Answer:	I’m going to say yes. I purchased the 2800 Simpson and this pump fit perfectly. I would however as a precaution call the seller with the bolt pattern and measurement of the spindle. Believe my spindle was 7/8. It has worked well for a couple years now. Much better than the original as well. So I recommend the product.
Question:	Will this pump fit a simpson 3000psi model msv3024r part # 60583r serial # 21240. dare code
Answer:	I have a simpson model # MSV3024 i purchased this pump and it fit fine.
Question:	Will this pump fit the ryobi 3100 psi 2.5 gpm gas power washer with honda 190 engine
Answer:	I have a Simpson GCV 190 (3,000psi) with a Honda motor and the replacement pump fits just fine.