8 best eminence 10 inch subwoofers

Product description

THE NEW EMINENCE KAPPALITE KL3010LF  IS A LIGHTWEIGHT 10" BASS SPEAKER THAT HANDLES 450 WATTS RMS & 900 WATTS PROGRAM

• VERY HIGH 8.52MM XMAX FOR A CLEAN STRONG BASS SOUND
• Package Weight: 3.583 kilograms
• Package Dimensions: 14.478 L x 28.702 H x 27.94 W (centimeters)
• KL3010LF-8

Product description

Great for vented satellite monitor or bass guitar enclosures Accepts 1" exit HF driver with 1 3/8" male thread (not included) This allows the user to select their preference in HF drivers and makes the KL series much more affordable and versatile

• High power coaxial woofer design with 3" fiberglass 1/0 voice coil for lower distortion and power compression
• Package Weight: 3.346 kilograms
• Package Dimensions: 14.7 L x 28.4 H x 28.3 W (centimeters)
• KL3010CX-8

User questions & answers

Question:	I bought 4 kappa pro 12 & 4 eminence asd1001b 1" hf horn driver what two way board crossover should i use
Answer:	Yes they do play deeper than the 18 sounds.18 sound are much louder because they are higher in frequency and sensitivity
Question:	The little metals clips that are on each terminal, those are supposed to be removed, yes
Answer:	Hi Willydon, There is so much I could say, but I can't here. I like Yorkville/Traynor amps (having lived in Canada). While I think it would work, I think you could get a more suitable speaker for less that is 4 ohm. Have a look at the Eminence Legend CA154. I think you'll be happier with it both in cost and in performance. The Kappa Pro is really designed more as a PA speaker, The Legend is designed as a bass cab speaker. Good luck! my next choice would be a Celestion Pulse 15, although it is also usually an 8 ohm. 8 Ohm speaker won't hurt your amp, but it just may not be as loud. Personally, I have an old EV 15 in a similar cab for one of my "vintage" rigs that someone gave me.
Question:	I have some 18 Sound 15's but want to know if these play mid-bass better than the 18 sounds
Answer:	Yes, for the main and monitor (aux) buses. Not sure if the individual channels have graphic EQ. Suggest you download and read the manual.
Question:	My Yorkville Bloc 150B is a 4ohm 150w bass combo with a 15" subwoofer. Is this speaker overkill or can the amps handle it
Answer:	Only if you use an amp first its not a powered mixer, meaning it dose not have a built in amp

Product features

Eminence Professional Series Kappa Pro 10A

The Eminence Kappa Pro-10A speaker is recommended for pro audio in a sealed midrange, vented mid-bass and bass enclosure. An ideal replacement driver for your 10-inch PA midwoofer, the Eminence Kappa Pro-10A handles up to 1000 watts, reproducing 102 Hz to 2 kHz.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Made famous as an OEM Model in many popular bass guitar cabinet brands, This highly sought after design features a truncated cast frame Chassis for tight fitting in your 2x, 4x and 8x10 cabinet. Loud and clear bass guitar tone with legendary growl. 10" Bass guitar driver, 4 ohms, 200 watts.

• Package Dimensions: 28.7 H x 13.2 L x 28.4 W (centimetres)
• Package Weight: 4.241 kilograms
• Power Rating: 200W
• Country of Origin : China

Product description

Power Rating Watts 250W Music Program 500W Resonance 53Hz Usable Frequency Range 51Hz-3. 8kHz Sensitivity 97 Magnet Weight 34 ounce Gap Height 0. 312", 7. 92mm Voice Coil Diameter 2", 50. 8mm THIELE and SMALL PARAMETERS Resonant Frequency (FS) 53Hz DC Resistance (Re) 5. 75 Coil Inductance (Le) 0. 67mH Mechanical Q (QMS) 8. 14 Electromagnetic Q (QES) 0. 52 Total Q (QTS) 0. 49 Compliance Equivalent Volume (Vas) 60. 1 liters / 2. 1 cu. ft. Peak Diaphragm Displacement Volume (VD) 102cc Mechanical Compliance of Suspension (CMS) 0. 36mm/N BL Product (BL) 9. 6 T-M Diaphragm Mass Air load (Mms) 25 grams Efficiency Bandwidth Product (EBP) 103 Maximum Linear Excursion (XMAX) 3. 0mm Surface Area of Cone (SD) 344. 9 cm2 Maximum Mechanical Limit (XLIM) 8. 6mm MOUNTING INFORMATION Recommended Enclosure Sealed 8. 5-14. 2 liters/0. 3-0. 5 cu. ft. Vented 19. 8-70. 8 liters/0. 7-2. 5 cu. ft. Overall Diameter 10. 11", 256. 8mm Baffle Hole Diameter 9. 13", 231. 8mm Front Sealing Gasket fitted as standard Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0. 23", 5. 7mm Mounting Holes B. C. D. 9. 6", 243. 8mm Depth 3. 98", 101mm Net Weight 6. 8 lbs. , 3. 1 kg Shipping Weight 7. 8 lbs. , 3. 6 kg MATERIALS OF CONSTRUCTION Coil Construction Aluminum voice coil Former Polyimide former Magnet Composition Ferrite magnet Core Details Vented core Basket Materials Pressed steel basket Cone Composition Paper Cone Edge Composition Cloth cone edge Dust cap Composition Solid composition paper dust cap

• Product Type: Speakers
• Package Quantity: 1
• Made In China
• Package Dimensions: 28.702Cm (L) X 29.464Cm (W) X 13.462Cm (H)

User questions & answers

Question:	I have a gemini powered speaker that i want to replace the speaker that came with it.my question is, can i substitute 4 ohms rating to 8 ohms speaker
Answer:	I don't think these guys know how impedance works lol it's called resistance, and it depends on the coil, some manufacturers do build 4ohm versions, but 8 is the most popular because of it's sensitivity and usability. Wire 2 8ohm speakers together and the resistance increases to 4ohms (the lower the number the higher the resistance). 8ohm speakers give you more room to work with as amps have to work harder with higher resistance (lower ohms remember?). Anyways, in the professional world, 8 ohm speakers is pretty much all you're gonna see:)
Question:	is the price for a pair or 1 single speaker
Answer:	Per the Eminence website, 95.8 db.
Question:	Can this speaker go to 4ohms
Answer:	I never tried the imperio 18, but i can say these kilomax pro's are simply amazing, so smooth and very responsive. Now they do love power but trust me you will not be disappointed. These babies kick ass.
Question:	What is the sensitivity rating of these
Answer:	Hi, Here is a link to the box designs.http://www.eminence.com/pdf/Impero_18A_cab.pdfThanksJoe
Question:	Are these better than the imperio
Answer:	1200 watts RMS, 2400 watts peakThanks
Question:	recommended enclosure for this sub? regards
Answer:	I purchased Eminence American (8 ohms) 10". I don't know if this will help. I replaced a Fender Mustang 1 _8" guitar amplifier speaker. Anything would have been an improvement. Someone advised a pair speaker for a modeling amp. I can say I once took this 15 watt amp into the forest / wilderness to test it, turned it to 10 & it hurt my ears. My wife knew I planned to do this yet still yelled turn it down. It was that scary! But, I usually only play it on 1& half to 2. It's of course a brighter should than a 12" it's crisp with no speaker distortion at all volumes
Question:	How much rms is this speaker
Answer:	What are the specifications for your setup? This is a very rugged and powerful speaker, which should be well adapted to almost any application.
Question:	replacing speakers in a sealed 2 10 gk cab,will these delta 10 b ,be a nice replacement
Answer:	I used these to replace 15" woofers in my old Cerwin Vega U-15 speakers. They work great with my Integra 100w receiver. Sound great and they really thump. I would buy these again. Hope this helps.
Question:	Can this sub work in an IB setup
Answer:	I do not have the 10" but I have two 12s and 2 15s. Both sizes fit perfectly in the existing mounting holes in the cabs they replaced the speakers in. You can email Emminence and they will answer any questions. Might not be an immediate response. But, they will answer. In my experience within a couple of days. If its any help diameter is 10.09 in. baffle hole dia. 9.18 in. mounting holes b.c.d. 9.66 in. Hope this helps
Question:	My pioneer hpm1500 blew the bass. is this a good replacement
Answer:	Eminence pxb-2800 two way board, Or the PRV 2df 1800
Question:	what is the diameter of the mounting flange
Answer:	Method 1: remove clip and crimp wire to it then replace back on speaker. Method 2: remove clip, discard, solder wire straight to post. Method 3: remove clip, crimp wire to clip and place back on post, solder clip - wire - post all together.

Product features

Eminence Impero 18A

Italian for 'empire', Impero sets the tone for this elite offering of high quality, hand-built loudspeakers.

Using high motor strength with balanced Vas and Mms, the Impero series plays extremely loud and low in compact vented designs. The 18 inch Impero 18A is also rated at 1,200 watt continuous/2,400 watt program power, has a frequency range of 39 Hz to 820 Hz and is suited for full-range three-way boxes, bass guitar boxes and small subwoofers.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Eminence Professional Series Kilomax Pro 18A

There is nothing that shakes the house like a Kilomax. Designed for high power applications in main PA systems and subwoofers, it is ideal for pro audio subwoofer and woofer applications in sealed and vented enclosures. A 109 oz. cast frame magnet structure, double spider suspension, and integrated front loaded heat sink combine to pound out whatever you put in.

This is the 18" version of the Kilomax, with low end response for great sound, especially when paired with 2x10 and 4x10 enclosures.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

EMINENCE DELTALITE25104 Speaker Deltalite 2510-4 Set of 1

• 10"
• 4 Ohms
• 96 5 Db

User questions & answers

Question:	Is this a pair
Answer:	Best is Faital PRO, and B&C, Eminence and Celestion. We carry them all. Jeff SpeakersAndAmps
Question:	Available in 8 ohm
Answer:	You can replace an 8 ohm speaker for a 4 ohm but the volume wont be as loud. 8 ohms will actually be easier on the power amp not harder.
Question:	I want 10" speaker for line array and the driver. Wich is the best
Answer:	This is for one single speaker. And it worked well for us and haven't had any problems with any of the eminence speakers I got off Amazon that I purchased a year ago.

Product description

Power Rating Watts 500W Music Program 1000W Resonance 27Hz Usable Frequency Range 35Hz -200Hz Sensitivity 94.4 Magnet Weight 67 ounce Gap Height 0.380", 9.53mm Voice Coil Diameter 2.5", 63.5mm THIELE and SMALL PARAMETERS Resonant Frequency (FS) 27Hz DC Resistance (Re) 3.8 Coil Inductance (Le) 2.65mH Mechanical Q (QMS) 13.24 Electromagnetic Q (QES) 0.32 Total Q (QTS) 0.32 Compliance Equivalent Volume (Vas) 488.8 liters / 17.26cu.ft. Peak Diaphragm Displacement Volume (VD) 796cc Mechanical Compliance of Suspension (CMS) 0.25mm/N BL Product (BL) 16.5 T-M Diaphragm Mass Inc. Air load (Mms) 137 grams Efficiency Bandwidth Product (EBP) 84 Maximum Linear Excursion (XMAX) 6.7mm Surface Area of Cone (SD) 1188.0 cm2 Maximum Mechanical Limit (XLIM) 15.0mm MOUNTING INFORMATION Recommended Enclosure Sealed Vented 85-283 liters/3.0-10.0 cu.ft. Overall Diameter 18.00", 457.2mm Baffle Hole Diameter 16.57", 420.9mm Front Sealing Gasket fitted as standard Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0.28", 7.1mm Mounting Holes B.C. D. 17.25", 438.2mm Depth 8.13", 207mm Net Weight 17.0 lbs., 7.7 kg Shipping Weight 20.5 lbs., 9.3 kg MATERIALS OF CONSTRUCTION Coil Construction Copper voice coil Former Polyimide former Magnet Composition Ferrite magnet Core Details Vented and extended core Basket Materials Die-cast aluminum basket Cone Composition Paper cone Edge Composition Cloth cone edge Dust cap Composition Solid composition paper dust cap

• Long throw subwoofer for very small vented boxes
• Over-sized top plate and large pole vent help keep the coil cool
• Cast aluminum chassis designed to be lightweight and strong
• Country of Origin: UNITED STATES

User questions & answers

Question:	I have a mackie srm1801 500 powered sub cabinet and i believe 8 ohms. can i put this 4 ohm driver in it
Answer:	YEs, we have these in 8 ohm version JEff Trax Audio

Product features

Eminence Professional Series Delta Pro-18C

Long throw subwoofer for very small vented boxes. Over-sized top plate and large pole vent help keep the coil cool.

Each Eminence Professional model can be identified by its cast aluminum Eminence chassis that is lightweight and strong. Aluminum does not conduct the magnetic field out of the gap, thereby making the motor strength higher and the stray magnetic field lower. We coat each chassis and all metal components with an epoxy-acrylic finish using our in-house e-coat process.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Eminence American Standard Alpha-10A 10" Mid-Bass Pro Audio Speaker 150 Watts at 8 Ohms

• Recommended for pro audio mid-bass applications
• Best suited for small sealed cabinets
• Easily handles 300W and frequencies from 57 Hz to 4 5 kHz
• Package Weight: 2.223 kilograms

User questions & answers

Question:	What you mean by replacement speaker
Answer:	If you are referring to the cabinet, it can be used in both an open back cab as well as a sealed back cabinet.
Question:	what amplifier is best for 4 alpha 8a
Answer:	It is designed to be a PA speaker, but is used for lots of applications-PA, bass amp, keyboard amp, ...and Alpha's are used by hi-end audio speaker designers for very specific applications. It's a great all-around speaker. I personally use them for bass amps.
Question:	Is this the sealed back speaker
Answer:	Not with the same power amp. If amp is not matched to the ohm load, either you will be under powered, or, over powered and roast the speakers, in a very enefficient way. Match the speaker ohm load to the amp you have or visa versa. Our self powered sub's got smoked. Switched to passsive, external amp and the matching eminence sub speakers are sounding better then what we had before (jbl518s). Took a little work converting the powered sub's to passive sub's ,but not that much. Bottom line if you are still using the Mackie self powered amps, match the speaker ohm load of the original, and you'll be fine. We love our eminence new sub speakers. Hope this helps.
Question:	Is this a bass speaker
Answer:	No, it's per speaker.

Product features

Eminence American Standard Alpha-10A

Recommended for pro audio mid-bass applications in a small sealed cabinet.

Each Eminence American Standard model can be identified by its economical Stamped Steel chassis. Although more affordable than cast aluminum, these frames provide an excellent and versatile chassis. We coat each basket and all metal components with an epoxy-acrylic finish using our in-house e-coat process.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.

Product description

Eminence Legend 105 10in Guitar Spkr 75W 8 Ohm

• Higher power vintage seamed cone tonality for guitar
• A very meaty tone but with sparkle definition and a smooth top-end
• Ideal for Blues Country Rock

User questions & answers

Question:	I have an amplifi 150 it is a 150w amp however current speaker is 80w. would this work
Answer:	I decided to put a new baffle in my vintage deluxe reverb because I like the sound of two 10 inch speakers. I bought two of these in 16 ohm so that together they would end up being 8 ohm. I’m guessing a third 16 ohm speaker would be your best bet. The key would be and how you actually wire them together. Eminence has some diagrams on their website. It might be worth a phone call to them to get their expert advice before you make your final decision. The speakers sound great by the way.
Question:	The speaker I want to replace is 40 watt 4 ohm. Willl this work
Answer:	No. This is a big honking 150 watt guitar amp speaker.
Question:	If I buy 2 of these what speaker should I get for a 3 speaker cabinet so that the final ohm value is 4-8 ohms? would it need to be 4 0hm or 16 ohm
Answer:	Dear Irven,Here is the link with manual:http://www.eminence.com/pdf/Alpha_6A.pdfThe amazon put replacement word in title and we can nt change itIt is speaker
Question:	can the 1518 guitar speaker be used to replace stereo system speakers
Answer:	depends, what are you using it for? I'm going to guess car audio? midrange or midbass? depending on the enclosure and how low you want them to play you will want around 100-150 watts each RMS true power. if you are putting more bass they will be at their mechanical limit before the thermal limit so 100 watts will be fine, if running more for midrange and you cut them above 100 or so you can use easy 150 watts each. if running in stereo (left/right) which many people seem not to do anymore... get a 4 channel amp that you can bridge to 2channel so it puts out it's max power into 2 4ohm channels for the most efficient use. if using on a mono amp like taramps, corzus, timapno etc, use one that is optimized for a 2ohm load and around 800-1200 watts. if it has a clip indicator just made sure it's only flashing occasionally and very slightly - otherwise referred to as "soft clip" and you can put 250 into each of them but if you clip harder where the clip light is heavily flashing or solid at all you will be seeing the "magic smoke" come out of them very soon

Product features

Eminence Legend 1058

When you need a little extra power, the Eminence Legend 105 Guitar Speaker is perfect as a general 10 inch replacement. It has been and continues to be original equipment in many of your favorites. Eminence guitar speaker guru Greg Martin, of the Kentucky HeadHunters, has these 75 watt speakers loaded in his Super Reverb! It would be a perfect speaker for anyone playing Country, Blues, or Rockabilly. This speaker works well with Rickenbacker guitars, a Super Reverb or a Super.

Legacy

We’ve spent over 50 years collaborating with audio engineers from the world’s most recognized brands, and we’ve gained a wealth of knowledge along the way. The result is a complete line of replacement and upgrade loudspeakers and high-frequency devices for virtually any OEM, DIY, or repair project.

Quality

Our products are designed and assembled in the USA by highly skilled and dedicated employees. From high-end pro audio applications, to replacement or upgrade guitar and bass speakers, Eminence has a hand-made product that will exceed your expectations.

Service

We take great pride in our commitment to customer service, so if you have questions, we are ready to assist. From Tech Support, to Sales and Marketing, to even our Design Engineers, we will take the time to personally consult with you to ensure your needs are met.

About the Founder

In 1966, Bob Gault founded what was to become one of the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Ironically, Gault started Eminence hoping to maintain three 18" speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing over 240 people by 1997.

Gault was the president of Eminence from the company’s inception until 1992. He officially retired in 1993, but continued to make valuable contributions to the company. Gault passed away on October 4, 2002. He is greatly missed by his family, the music industry, and the Eminence community.