3 best sand blaster for pressure washer

A sand blaster attachment for a pressure washer is a tool designed to enhance the cleaning and surface preparation capabilities of your pressure washer. It allows you to use abrasive materials, such as sand or baking soda, along with the high-pressure water stream from your pressure washer to remove rust, paint, graffiti, or stubborn stains from various surfaces. Here's what you should know about sand blaster attachments for pressure washers:

  1. Functionality: A sand blaster attachment connects to the wand or nozzle of your pressure washer. It combines the force of high-pressure water with abrasive material to effectively remove surface contaminants. It's particularly useful for tasks that require more aggressive cleaning than water alone can provide.

  2. Abrasive Media: While sand is a common abrasive media used with these attachments, others, like baking soda, crushed walnut shells, or glass beads, can be used depending on the specific job requirements and the material being cleaned. Different abrasive media offer varying levels of aggressiveness and surface finish.

  3. Surface Compatibility: Sand blasters for pressure washers can be used on various surfaces, including metal, concrete, brick, and wood. However, it's essential to choose the appropriate abrasive media and pressure settings to prevent damage to delicate surfaces.

  4. Pressure Settings: Many sand blaster attachments are adjustable, allowing you to control the pressure of both the water and the abrasive media.Adjusting the pressure is crucial to achieving the desired cleaning effect without causing surface damage.

  5. Safety Precautions: When using a sand blaster attachment, it's important to wear appropriate personal protective equipment (PPE), such as safety goggles, gloves, and a dust mask, to protect yourself from flying debris and dust. Additionally, ensure that bystanders are a safe distance away.

  6. Application: Sand blaster attachments are commonly used for tasks like removing rust from metal surfaces, stripping paint or coatings, cleaning concrete and masonry, and preparing surfaces for painting or refinishing.

  7. Maintenance: Proper cleaning and maintenance of the sand blaster attachment are essential to ensure its longevity and performance. This may include flushing out any remaining abrasive media after use and periodically inspecting the nozzle and hose connections for wear and damage.

  8. Compatibility: Check the compatibility of the sand blaster attachment with your specific pressure washer model to ensure it can be securely attached and operated without any issues.

  9. Environmental Considerations: When using abrasive media, be mindful of environmental regulations regarding the disposal of waste materials. Some abrasive media may require proper disposal or recycling.

  10. Cost: The cost of sand blaster attachments can vary based on factors such as brand, quality, and features. Higher-quality attachments may provide better durability and performance.

Remember that the effectiveness of a sand blaster attachment for a pressure washer depends not only on the attachment itself but also on the quality and power of your pressure washer unit. It's important to follow the manufacturer's instructions for both the pressure washer and the sand blaster attachment to ensure safe and effective use.

Below you can find our editor's choice of the best sand blaster for pressure washer on the market
  

Angela&Alex Pressure Washer Sandblasting Kit, 5000 PSI Wet Sandblaster Attachment with Goggle, 1/4 Inch Quick Disconnect Sandblasting Kit

Angela&Alex

Based on 487 reviews Check latest price
  • SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands.
  • WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
  • APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!
  • HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F.
  • EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer. It is one of the best choices for Father's Day gifts.

User questions & answers

Question: How to install sand extraction cleaner
Answer: It didn't work when I tried to run it in the main drain, so I put a hole in the straight part of the PVC. But it did work when I tried underneath the kitchen sink but I have to remove the P-trap and start from there.
Question: Is the product actually the same as the picture
Answer: No, it is too much trouble to wrap the waterproof tape,this sewer jetter hose fitting has a rubber ring and the sealing effect with jetter nozzle is perfect.
Question: What is the flow requirement of the pressure washer
Answer: Dear friend, We suggest you use at least 3200PSI pressure washer, 2070 psi may not have good effect, hope this answer can help you. Thanks.
Question: Can the ceramic nozzle be replaced
Answer: I like the sewer jetter kit and it works effectively for debris dirt and mud. I used it on my French drains and some of the foundation drainage, and it was effective. It is a water pressure washer and I doubt that it would clear tree roots. It might give them a good bath, But I would doubt that it would clear them from the pipe. I would look for something with more aggressive rotating action like roto-router with blades, which you can Ranch. The follow up question is, if roots are penetrating the pipe, which is not unusual, the problem will likely recur. Best of luck.

BOTINDO Pressure Washer Sandblasting Kit,Wet Sandblasting Attachment with Goggle,1/4 Inch Quick Disconnect,5000 PSI,Orifice 3.5, for Abrasive Cleaning

Based on 12 reviews Check latest price
  • Includes: The pressure washer sandblasting kit includes 1 x Hose, 1 x 16" Pressure Washer Wand (water input), 1 x 15 3/4" Sand Wand(sand input),4 x Hose Clamps,1 x Goggle. Extra Bonus:2 x Long Ceramic Nozzles, 2 x Short Ceramic Nozzles,4 x Rubber Bands
  • Minimum Flow Rate: 3 GPM. Orifice 3.5. Max Temperature is up to 140ºF/60ºC. Minimum Pressure of power washer sandblasting kit is 3000 PSI. Max Working pressure rating 5000 PSI.
  • Durable and Longevity: Sand blaster kit is made of brass and stainless steel. Premium materials are resistant to corrosion, abrasion, and stable performance. 1/4 inch quick connector suitable for most pressure washer, easy to use.
  • Principle: Pressure washer sand blasting attachments is suction-fed injection of sand into water system.Use dry silica sand, baking soda washed and dried river sand for better cleaning results.
  • Application: Mainly works for household and factory abrasive cleaning. Ideal tool for removing rust, graffiti, paint, grease baking, scale and other stubborn stains on various surfaces.

User questions & answers

Question: Can I use water to use this sandblasting gun? Or just sand
Answer: Simple cleaning can use water. Sand cleans stubborn dirt better.

Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

Based on 639 reviews Check latest price

Product description

Wet sand blaster for pressure washer is suction-fed injection of sand into water system.

Working pressure of pressure washer sandblaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃.

The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input), permanent nozzle (output) and two hose clamps. .

Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.

Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order "Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 2500 PSI".
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps.
  • Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack". Working pressure of pressure washer sandblaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃.
  • Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

User questions & answers

Question: Can I get 3.0 orifices when I order this
Answer: This kit is missing some of the piece that were in the 6048. The color coded o rings are the same size. The screen that go in where the gun attaches to the hose and the black o ring are not included. If that’s what you need this kit will not work for you.
Question: how do I order the right one for my pressure washer
Answer: this is pump oil not engine oil
Question: Two different sands tried. Both completely dry and using a 4400 psi washer. Suction is not enough to pull the sand. Any suggestions
Answer: If you mean the outside edge of the mat....I just went outside & measured it and it's 1" wide.
Question: What sand is good to strip paint off car without Messi g up the metal? I have glass bead sand 40 grit but it’s expensive and suggestions
Answer: These mats have a recycled carpeted surface and a solid rubber backing that will prevent water from leaking/draining through from the top to the floor below. Also, these mats have a water dam border to help prevent moisture from running off the sides of the mat. https://www.amazon.com/gp/offer-listing/B0040H71EW/?seller=ASIRD3RM6OQ4 Thanks, American Floor Mats

Product features

SPECIFICATION
Application

Pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.

How to Set Up

1. Connect 1/4’’ quick connect plug (B) to pressure washer trigger gun or wand.

2. Insert sand wand (C) into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.

3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from permanent nozzle (A). Please make sure the part D is above permanent nozzle (A). If the part D is underneath permanent nozzle (A) as the image shown, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.

4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.

Latest Reviews

View all