12 best mtd lawn edgers

Product description

Made with high carbon steel, the Oregon edger blade 40-009 is heat treated for maximum life and extended durability. The heat treatment helps the blade resist bending or breaking on the job. Replaces many OEM parts, including but not limited to the following: MTD - 781-0748, MTD - 781-0748-0637, Troy-Bilt - 781-0748, Troy-Bilt - 781-0748-0637. Fits many models, including but not limited to the following: Troy-Bilt - TB554.

• Center hole: 5/8"
• Non-sharpened blade
• Rounded Edges, 3-teeth
• Resists bending, breaking, and fracturing
• Replacement for major brand: MTD. Heat treated for maximum durability and life

User questions & answers

Question:	I need a 1/2 inch arbor. Who has these
Answer:	I would look into a hard bushing.
Question:	Will this fit a Craftsman edger
Answer:	I beleve it will fit all edgers but check what hole sizes from edger and blade.
Question:	What country is the blade manufactured in
Answer:	The ones I got are stamped 'Made In China'. I do not know if all of them are or just the ones I received. They appear to be fully hardened and wear like the originals.
Question:	what is diameter of blade
Answer:	The diameter of the blade is 9 inches. The diameter of the hole is 5/8 inches. I guess the web site does not specifically state this but should.

Product description

The attachment should fit attachment capable trimmers of the following brands: Ryobi, Greenworks, Toro, Troy-Bilt, Troy-Bilt XP, Craftsman, Cub Cadet, Murray, Poulan.

• 7.5 INCH DUAL STEEL BLADE: Hardened steel blade trims between sidewalks, curbs, and landscape beds to give a clean, manicured look.
• LARGE GUIDE WHEEL: Keeps you on a straight path for easier edging. Stay in firm control during yard work.
• ADJUSTABLE BLADE DEPTH: Can adjust blade depth up to 25-inches for more precise edging and cutting. Find the depth that works best for you. Battle tested and battle ready for even the toughest of lawn care tasks.
• WARRANTY: 2-year limited.
• COMPATIBILITY: Fits Attachment capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, Kobalt and most other major brands.Powerhead coupler accepts 1 inch diameter tube Drive shaft connector: Square shape .205” Female Attachment drive shaft: Square shape .200” across flats. Check description below for all compatible models.

User questions & answers

Question:	Would it fit ryobi cs
Answer:	This fit my husqvarna 128ld straight shaft trimmer. It has the square drive cable and works with other brands of other square drive cable trimmers.
Question:	Will it fit the weedeater brand name of trimmers
Answer:	If it has the square cable drive for the attachment it might work
Question:	Would this work with a Craftsman edger
Answer:	Hello there! Thank you for reaching out. This TrimmerPlus attachment will fit all attachment-capable Craftsman units. Best, MTD Team
Question:	Is there a difference between the 2017 and 2018 editions? The 2017 is a bit cheaper
Answer:	I can’t really tell a difference other than the packaging. I have purchased both and replacement blades which are also the same. I am very happy with mine. I hope this is helpful to you.

Product description

If you want your outdoor power equipment to last longer and do more, you want Arnold parts, accessories, and attachments. Providing you with a wide variety of hassle-free, top-quality products, Arnold parts will keep all your equipment in the best shape possible. Compatible with tons of major brands, 50+ years of proven performance has landed Arnold a reputation of cutting edge product innovations and extensive engineering expertise. From basic maintenance to major innovations, Arnold has everything you need to keep equipment running the way it should season after season. With Arnold you can be confident of a reliable product with accurate fit, design, material, and construction. In addition to reliable parts and accessories, Arnold’s easy-to-follow instructions and extra tips will ease your equipment maintenance and assure that you get the job done right.

• Fits edgers 2004 and after
• For Troy-Bilt, MTD, Yard-Man, Huskee, Yard Machines and Bolens units
• Contains one belt
• Replaces O.E. models 754-04032B and 954-04032B

User questions & answers

Question:	I have a yard man the model number 25A-550A129 will this belt fit
Answer:	Would this belt fit MTD edger model 25A-550A729
Question:	Will this fit 25B-550A729 yard machine edger
Answer:	Fits 2004 and later Yard Man edgers.
Question:	What is the circumference of this belt
Answer:	I will have to measure
Question:	Will it fit Craftsman 25B-55S5793 edger
Answer:	Yes this is the correct one for this model.

Product description

If you want your outdoor power equipment to last longer and do more, you want Arnold parts, accessories, and attachments. Providing you with a wide variety of hassle-free, top-quality products, Arnold parts will keep all your equipment in the best shape possible. Compatible with tons of major brands, 50+ years of proven performance has landed Arnold a reputation of cutting edge product innovations and extensive engineering expertise. From basic maintenance to major innovations, Arnold has everything you need to keep equipment running the way it should season after season. With Arnold you can be confident of a reliable product with accurate fit, design, material, and construction. In addition to reliable parts and accessories, Arnold’s easy-to-follow instructions and extra tips will ease your equipment maintenance and assure that you get the job done right.

• Fits edgers that require a 9" (22.9 cm) blade with 5/8" (1.59 cm) center hole
• For Troy-Bilt, MTD, MTD Gold, Yard-Man, White Outdoor, Huskee, Yard Machines and Bolens units
• 5/8" round center hole
• Pack of 2

User questions & answers

Question:	Will this fit Echo pas
Answer:	Verify your model number either in owner's manual or google the model number to be sure the arbor (center mounting hole) is 5/8 Inch and that a 9 inch total diameter blade will fit inside the protective shield of the blade. If both measurements are as I stated, it will work. Better yet, the blades after installation really work well too.
Question:	will this work on model 25b-550a
Answer:	I need more info. Can’t help
Question:	will this work on model 25b-550a
Answer:	As long as it has space inside the blade shield for a 9 inch blade with a 5/8 inch arbor it should work just fine. The arbor hole (5/8") and overall blade size ( 9" ) are the only restrictions. BE SURE TO TIGHTEN THE BLADE NUT SECURELY BEFORE USE. You certainly don't want the blade coming off the shaft. This was the best price I found when searching and it gives me a spare blade. It works just fine and much better than my old worn out blade.
Question:	Will it fit craftsman model
Answer:	I have a craftsman edger and it works on it. Key is measure the hole diameter to assure a match

Product description

7.5" Replacement Edger Blade. Compatible with Troy-Bilt, Remington, MTD, Yard-Man, Yard Machines and Bolens.

To ensure a neatly-groomed yard, a powerful edger is essential. Without a sharp, effective blade, the lawn’s perimeter often appears choppy rather than clean. Regular blade replacement helps prevent such flawed landscaping.

Designed for use with the attachable edger of Ryobi’s versatile Trimmer Plus, this replacement blade features strong steel construction, with sharp teeth for clean, deep cutting. With a blade depth of 2-1/2 inches, the smooth blade allows for deep edging when necessary. The blade is easy to install, comes with a two-year limited warranty, and measures 7-1/2 inches long. --Jessica Reuling

From the Manufacturer

Replacement Edger Blade for Trimmer Plus Edger attachment LE720R

• 7.5" Replacement Edger Blade
• Compatible with Troy-Bilt, Remington, MTD, Yard-Man, Yard Machines and Bolens.
• Constructed with durable components
• #791-613238

User questions & answers

Question:	How do i keep blade sharp
Answer:	22 to 37 inches as measured for the shaft itself not including the plastic parts.
Question:	I have a replacement blade for a edger attachment. Where do I find the tool to keep the old blade from rotating while I am removing it
Answer:	The item weight of the PowerSmith PGT140 40V string trimmer is 10.00 lbs. We will work to update the item weight specification immediately. Thank you for your interest in PowerSmith Lawn & Garden Power Tool Products!
Question:	Is this the replacement blade for the trimmer plus le
Answer:	Replacement refill cartridges are available on amazon by searching for POWERSMITH PASTS180-2 Replacement 0.08 Inch Line for 40V Max String Trimmer. Thank you for your interest in PowerSmith Lawn and Garden Tools!
Question:	what is diameter of center Hole
Answer:	same problem here could not find any parts online so i donated it to salvation army

Product description

Oregon Edger Blade for MTD 781-0080, Pack Of 5

• Replaces The Following OEM Part Numbers: MTD 781-0080
• Type: Not Sharpened; Design: Rounded Edges, 3 Teeth
• Length: 9" ;Width: 2-1/2" ;Thickness: .090"; Center Hole: 5/8"
• Fits 500-600 Series Edgers

User questions & answers

Question:	I purchased a used 3.5 hp edger. Will these blades fit the edger I have
Answer:	1 inch (2.5 cm)

Product description

Includes 40-316 Edger Blades. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: MTD 250-586-013 Edger, 250586 Edger, 250-586-019/823-101 Edger, 251-586-013 Edger, 251586 Edger, 251-586-019/823-101 Edger, TMO-37960 Edger, 252-586-000 Edger, 253-586-000 Edger, 254-546-000 Edger, 254-556-000 Edger, 254-586-000 Edger, 254-587B118 Edger, 255-546-000 Edger, 255-556-000 Edger, 255-586-000 Edger, 225-587B118 Edger, 255-588-000 Edger, 225-588B013 Edger, 256-587-729 Edger, 256-587B118 Edger, 256-588-129 Edger, 256-588B013 Edger, 256-598-129 Edger, 245-604-000 Edger, 24604S (1985Edger, 246-604-000 Edger, 24604C (1986Edger, 246-604-111 Edger, 24604-7 (198Edger, 247-604-000 Edger, 604-073 (198Edger, 24604-8 (198Edger, 248-604-000 Edger, 248-604-027 Edger, 24604-9 (198Edger, 249-604-000 Edger, 240-586-000 Edger, 586-046 Edger, 251-586-000, TMO-35254 Snow, 311-586-054 Snow, TMO-35254 (3Snow, 310-586-027 Snow, 247-604-009 Edger, 248-604-009 Edger, 248-604-013 Edger, 248-604-019 Edger, 248-604-032 Edger, 248-604-045 Edger, 248-604-046 Edger, 248-604-059 Edger, 248-604-087 Edger, 248-604-102 Edger, 248-604-118 Edger, 248-604-135 Edger, 248-604-141 Edger, 248-604-169 Edger, 248-604-192 Edger, 248-604-382 Edger, 249-604-084 Edger, 249-604-013 Edger, 252-586-009 Edger, 252-586-013 Edger, 252-586-023 Edger, 252-586-027 Edger, 252-586-031 Edger, 252-586-032 Edger, 252-586-045 Edger, 252-586-059 Edger, 252-586-062 Edger, 252-586-083 Edger, 252-586-084 Edger, 252-586-087 Edger, 252-586-088 Edger, 252-586-098 Edger, 252-586-102 Edger, 252-586-111 Edger, 252-586-120 Edger, 252-586-129 Edger, 252-586-136 Edger, 252-586-137 Edger, 252-586-192 Edger, 252-586-205 Edger, 252-586-314 Edger, 252-586-352 Edger, 252-586-372 Edger, 253-586-013 Edger, 253-586-098 Edger, 253-586-205 Edger, 253-586-736 Edger, 254-546-134 Edger, 254-586-013 Edger, 254-586-129 Edger, 254-586-372 Edger, 255-546-301 Edger,

• Sold on Amazon

User questions & answers

Question:	Will this fit troy-bilt tb516 ec 29cc 4-cycle wheeled edger
Answer:	I have a MTD 3.5 hp edger and it worked fine for me. I'd suggest you measure the space from the threaded shaft to the blade shield as well as the diameter of the shaft. If both of these agree with the specs of this blade, then it should work for you as well.
Question:	will it fit a 3.5 hp yard machine
Answer:	You don't. It gradually wears down.
Question:	Will this blade work with a Craftsman edger
Answer:	My attachment for my Troy-Bilt came with the tool. It is simply a peculiar looking metal rod with several bends in it and one end fits into a hole in the shaft/hub that the blade attaches to which keeps the shaft from spinning. It’s a little awkward but it works.
Question:	what size is the center hole
Answer:	If you don't have the parts list that ships with the trimmer, try looking up your lrimmer on the ereplacementparts website.

Product description

Lawn edger with 3-1/2-feet.-lb. torque, 79cc horizontal OHV engine. Both EPA & CARB 2009 compliant. Unit has easy to start features with curb-hopping and horizontal drive. Triangular 3 point blade with angle that adjusts +/-15 degrees for bevel edging with 5 depth positions and up to 2-1/2-inch deep. 2 year limited warranty.

• Metal frame and blade guard for increased durability
• Product dimensions – 30.31” L x 19.29” W x 18.5” H | Weight – 60 lbs. | RPM – 3600 RPM | Engine – 4 Stroke OHV / 79cc | Blade Size – 9-Inch, 3 point | Cut depths – 0-2.5 inches | Start type – Easy Pull recoil system
• Adjustable to 5 depth positions up to 2 ½-inch deep
• Fuel the stabilizer if the edger is kept unused for 30 dayS
• Blade angle adjusts +/- 15 degrees for bevel edging capabilities

User questions & answers

Question:	What size is the blade? Where can I buy a replacement
Answer:	9" 3 blade- Amazono Arnold 3 side edger star blade - 490105M017
Question:	Standing on blade side looking at blade, which way does it rotate? I've seen two different answers
Answer:	Counter clockwise. If it spun the other way the grass, dirt and loose stones would fly up in the air hitting you and everything around you.
Question:	stroke? or 4 stroke
Answer:	4 stroke and starts easily.
Question:	What brand is the engine? ie: briggs/stratton? what is the hp
Answer:	ny 108CC B&S is 2 HP so my guess is maybe 1.5ish HP. It is a motor made in China and sold to others so they can white label the motor as theirs.

Product features

Southland Lawn Edger with 79cc, 3.5 foot pound, OHV Engine

- Manual recoil easy start.

- Curb hopping ability.

- 5 depth positions.

- 2 inch cutting depth.

- Triangular 3 point blade.

- Blade adjusts for bevel cut.

- 2 year limited warranty*.

- EPA and CARB certified.

*For more information you can contact the official customer service or visit the official website.

Product Description

Get the professional landscaping look without paying the professional price using the Southland Lawn Edger. The edger is equipped with a 79cc OHV engine that delivers a powerful 3.5 foot pounds of torque. Starting the edger is simple and quick thanks to the manual recoil easy start. The three 9 inch triangular blades can be adjusted to five different depth positions to reach a cutting maximum of 2.5 inch. The blade can also be adjusted 15 degrees left or right for beveled edging. No need to struggle with those rough spots around the curb, adjustable front and rear wheels provide a curb hopping ability to swiftly slice through those tough edges. The sturdy metal frame and blade guard ensure the ability to protect your edger for whatever your yard throws its way. The Southland lawn edger is easy to assemble, runs quietly, and can tackle those tricky edging spots leaving your lawn looking professionally manicured. The Southland lawn edger is backed by a 2 year limited warranty* and is EPA and CARB certified.

Triangular 3 Point Blade

Allows for a cutting depth of 2.5 inch.

5 Depth Positions

Can adjust the blade to 5 different position spots for comfort and precision.

Bevel Adjustment

Blade can be adjusted 15 degrees left or right for beveled edging.

Curb Hopping Feature

Creates a convenient way to trim the edges around the curb.

Southland Outdoor Power Equipment

MAT Engine Technologies offers a variety of Southland branded, 2 and 4 cycle gas engine outdoor power equipment products, that provide time saving options for consumers that need a durable design with distinct features for blowing, cleaning, cutting, digging, edging, shredding, splitting, tilling, and trimming applications.

Product description

The Earthquake Edger is an incredibly versatile tool for homeowners and landscapers alike to achieve beautiful and professional looking borders around lawns, sidewalks, driveways and property lines. With a 79cc Viper Engine you can be confident that there is plenty of power being transferred to the 9” spring steel blade to make quick precision cuts that will leave crisp, clean lines. Rolling on the stability of 4 wheels balances the unit allowing for the user control that is necessary to maintain consistently straight edges. The multi-angle cutting head offers 6 positions from 0 to 110 degrees to ensure that you have the correct angle available to aggressively attack grass types ranging from straight blade to curly creeping. In addition to edging, this unit doubles as a small utility trenching tool for backyard cables and wires. With robust all-steel construction the Earthquake Edger can withstand the abuse associated with cutting through tough weed encroachments or stubborn sod. Backed by a 5 Year Limited Warranty and outstanding US based service and support, you can get excited about taking back the borders of your lawn like a professional detailer with an Earthquake Edger.

• POWER AND FLEXIBILITY: The 79cc Viper Engine spins a 9” spring steel blade at 3400 RPMs providing the power and speed you need to accomplish lawn, sidewalk and driveway edging tasks. The edger can also be used for smaller trenching jobs such as electric fence installation or creating an underground cable run to a garage or shed.
• MUTI-ANGLE CUTTING: Our multi-position pivoting head offers 5 different cutting angles from 70-110 degrees allowing the user to select the angle that is best suited to handle any type of grass they need to edge. Head adjustment is made by simply sliding the single-hand operated lever into the appropriate notch on the adjustment plate.
• PRECISION LINES: Clean professional lines can be easily achieved regardless of grass type when you combine the balance of a 4-wheeled design with multi-angled cutting. Use the 90-degree angle option to slice through standard blade grass or select between angles of 70, 80, 100, and 110 degrees to create a clean edge when dealing with creeping or tuberous grasses.
• FLEXIBLE DEPTH CONTROL: Take complete control over your depth of cut with our flexible control mechanism. From the operating position, engage the adjustment lever with one-hand to select from over 5 different depth settings from 0.5 inches up to 3.5 inches.
• DEBRIS GUARD AND TOOL HOLDER: A durable chain skirting protects the operator from flying debris while the attached tool holder provides a convenient place to store smaller hand tools making them easily available for lawn and sidewalk detailing.
• WARRANTY AND SERVICE: Earthquake is committed to providing a great product and an even better user experience which is why the Edger is backed by a 5-Year limited warranty and US-based service and support.

User questions & answers

Question:	What is the height of the handles measured from the ground up? Is it comfortable for a tall person to use? My husband is
Answer:	Yes, it comes with docking/charging station and battery.
Question:	does it have curb hop capability
Answer:	The RS 612 can only handle 1/4 - 1/3 acre. The RS 630 can handle 3/4 (0.75) acre. Higher capacity battery is the difference.
Question:	do the wheels adjust to edge along a curb
Answer:	3/4 of acre
Question:	What is the make or model of the engine
Answer:	I have the 2017 430x and the connect kit was not included, the new 2018 430x now comes with the connect kit. From what I understand some dealers have 2017 models available, which are being sold at a lower price and may be a better deal as you can buy the kit and install as an accessory.

Product features

Tool Holder

Handy tool and drink storage built into the handlebars.

79cc Viper Engine

Powerful engine with centrifugal clutch to handle tough jobs.

Chain Debris Guard

Chain link guard to protect operator from flying debris.

Pivoting Head

Allows for multiple edging and cutting angles.

Product description

Genuine MTD Lawn Mower Belt 954/754- 04032B The product is a genuine MTD belt not a cheap aftermarket belt.

• Sold on Amazon

User questions & answers

Question:	Is this replacement for mtd edger belt
Answer:	Yes
Question:	Is this one made in the usa or chinese junk
Answer:	I really can't remember, but the fit is perfect and the belt has been on for close to a year. Heavey use the first day i put it on, the last belt i bought a rural king broke the first day of use.

Product description

All-in-one lawn mower, string trimmer, and edger (view larger). Offering the ultimate in small yard and garden versatility, the innovative Black & Decker 3-N-1 trimmer/edger and mower gives you three types of landscaping functionality in a single, compact tool. Thanks to its small footprint design, this an ideal mower, string trimmer, and edger for homes with small yards of up to 1,200 square feet, as well as yards with small inclines or difficult-to-reach areas. It's also a great solution for homes with limited storage space. This model (MTC220) offers cordless freedom, but it's also available in a corded version so you can choose the right option for your yard. No bumping required with Auto Feed System (view larger). Cordless Freedom The cordless 3-N-1 trimmer/edger and mower includes two 20-volt MAX lithium-ion rechargeable batteries. 1 Black & Decker's 20-volt MAX lithium-ion batteries offer a longer lifespan and retains its charge 5x longer than similar 18-volt NiCad batteries. They're compatible with the full line of Black & Decker's 20-volt MAX line of power and gardening tools, and you won't be limited by an extension cord. Easy to use and maneuver, the battery-powered 3-N-1 eliminates the need for gas or oil to be stored. Ultimate Versatility The 3-N-1 features a durable mower base deck with four wheels that secures a Black & Decker string trimmer/edger with a 12-inch cutting swath. A foot pedal release allows for quick insertion and removal of the trimmer/edger as you move from mowing to trimming or edging. The mower deck also features two height adjustment options that raises or lowers all four wheels. The 12-inch trimmer/edger features a gear-driven transmission to maintain constant speed that won’t bog down while trimming, and AFS Auto Feed System for continuous and automatic line advancement without the need for bumping. It also offers a lightweight ergonomic design with adjustable height and handle positions, which provide maximum

• 3 tools in 1, easily converts from mower to trimmer to edger
• AFS automatic feed system ensures continuous work without bumping and having to stop. Ideal Property Size 750 ft²
• Power drive transmission prevents bogging down. Cutting heights: 1.6 2.4 inches
• Adjustable height deck & trimmer and pivoting handle. Charge time at 60 percent 2.5 hrs
• Includes batteries for extended run time

User questions & answers

Question:	Can this be used with B & D LST 1018 12" (now discontinued
Answer:	Per Black and Decker. the mower deck that comes with this kit is compatible with NST2118. LST220. LST300. LST400. LST420. GH912 units only.
Question:	how is this mower on a slope
Answer:	I got because of worry over steep frontage. Deck is very light weight, but sturdy. It works perfect for me where too steep for riding mower. Comes with extra battery and 1 did frontage (260' x 10') easily. Recharges in 4 hrs. I got extra spools of line, but haven't needed to switch as yet.
Question:	Is the user manual available online? I am looking for instructions to change the spools
Answer:	Don't pay for a manual. It is available free on-line from Black and Decker. Just go to the Black and Decker Web site and do a search for MTC220. When the page with the LTC220 picture came up, clicking on the "owners toolbox" link, causes the manual to download.
Question:	When used as mower, where the grass will go? There is no bag to hold the cut grass
Answer:	Jason, I love your answer. But so glad mine all arrived happy. Good to know replacements are so inexpensive on eBay 🙃 I guess if you’ve never used a mower before you might wonder where the grass goes. I’ve never used a bag, never dethatched, my zoysia is more than 35 years old and very healthy. I consider the grass clippings a gift from God. As far as where does the cut grass go, it stays pretty much right there. This is a very small mower if you use it that way. If the green stuff is very tall, we just had more than 10 days of rain, then I cut little narrow swathes. It is a weed eater with a deck. I had breast cancer 4 years ago. The treatment almost did me in. Up until then I did my own yard work. I’ve paid hundreds of dollars hiring idiots to scalp my zoysia and then take out my roses, Japanese maples, fig trees, lilies and plants large enough to see with weeders. I bought this little guy for me to use as it’s small enough for me use to mow my uneven lawn and it’s hard to scalp s rise budh if the weeder stays in the deck. I love this little guy.

Product description

**Verify part fits before purchasing**



Spec:



Description: Edger Blade

Center hole: 5/8"

Width: 2 1/2"

Thickness: 0.090"

Serrated

Not sharpened

Length: 9"



Replaces OEM NUmbers:



MTD: 781-0080, 781-0080-0637



Compatible with:



MTD: 25B-550C000, 25B-550C029, 25B-550D200, 25B-550229, 25B-520J000, 25B-520J029 and 25B-520K200, 2008 and newer edgers

• Specs: Description: Edger Blade, Center hole: 5/8", Width: 2 1/2", Thickness: 0.090", Serrated, Not sharpened, Length: 9"
• Replaces OEM Numbers: MTD: 781-0080, 781-0080-0637
• Compatible with: MTD: 25B-550C000, 25B-550C029, 25B-550D200, 25B-550229, 25B-520J000, 25B-520J029 and 25B-520K200, 2008 and newer edgers
• Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order.
• Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging.

User questions & answers

Question:	Does this blade work with troy built model # tb516ec
Answer:	Yes this blade will fit on the TB516EC
Question:	Will this fit the black and decker le
Answer:	No idea. Husband suggested checking online for info.
Question:	is it a replacement blade for craftsman edger blade PN
Answer:	That’s what I bought the blades for. I haven’t bolted it on yet, but I matched it up and it’s 100% identical
Question:	what is the hole size
Answer:	I'm not sure what size is provided by other vendors, but ours is 5/8" Inch. - constructionjoe

Product features

Stens 375-287 Edger Blade

Stens 375-287 Edger Blades are made for durability when handling the rigorous task of edging. These blades match OEM counterparts for performance when edging lawns. Serrated style blade.

Working with people who keep lawns and landscapes beautiful

Stens works in partnership with professionals who make a living maintaining outdoor landscapes, so they understand the need of the industry.

Stens has been in the outdoor power equipment business since 1970, building a reputation for supplying parts that work as hard as you do.

The depth of Sten's inventory is extensive

The Stens product line represents replacement parts for more than 200 brands in the marketplace.

You'll find quality-made parts for virtually every make, model and type of outdoor power equipment.

Quality control assurance on every part

Choosing a quality Stens product is a wise decision because equipment downtime is costly to you in lost revenue.