13 best ai riding lawn mowers

Product description

Bagging helps to foster lawn growth by preventing thatch from building up. Using a bagger helps control lawn disease naturally, encourages new grass growth, and acts as a natural crab grass and weed control. It can help increase curb appeal of your lawn. When you bag your grass clippings, you create a crisp appearance and a highly manicured professional finish, with defined striping, no grass clumps left behind, and grass less likely to spread to vegetable gardens or flower beds. Bagging your clippings is a huge time saver. It’s faster than raking and you won’t have to mow as often as mulching. Fits in the popular models (but not limited to) 13A877KS897 and 13B878KT897.

• GRASS CATCHER COMPATIBILITY: Fits most Troy-Bilt and Cub Cadet, Yard Machines, Bolens, Huskee and Craftsman riding mowers with a 42- or 46-inch Cutting Deck (2010 and after)
• EFFICIENT: Flex tubing for visual of grass flow to prevent clogging and increase shipping efficiencies. Sight window also lets you know when the bags are full
• INTEGRATED HOOD: Top hinged hood allows for easier removal of bags. You do not have to flip the seat up when emptying
• ENCOURAGE LAWN GROWTH: Bagging helps to foster lawn growth by preventing thatch from building up. Increase the curb appeal of your lawn
• LOTS OF CAPACITY: With a 6.5 bushel capacity, this bagger will leave no grass clumps behind and save you plenty of time

User questions & answers

Question:	Will this fit a 2019 Craftsman T
Answer:	This bagger fit a 2019 T210 42" Riding lawn mower.
Question:	Wil this unit fit the cub cadet xt
Answer:	Its a perfect fit for my club cadet 46" deck and believe the 42" has the same configuration as the 46". They have both the 42 and 46" at Home Depot so you could check them out before you order the bagger
Question:	will this bagger system work with the cub cadet xt
Answer:	This double bagger fits most riding mowers produced after 2010. I have an 'older' Cub Cadet LXT1046. Before you order, call MTD customer service to see if you'll need a kit to make the bagger fit properly. The kit costs about $25 but they sent it for free plus no shipping. The bagger is super easy to install. When your bagger arrives, read all the information to find the directions as the pamphlet applies to more than one model. The box may include some extra parts for models other than yours. MTD customer service is very knowledgeable and helpful.
Question:	Has anyone used a bagger to clean up leaves? If so how well does it work
Answer:	Leaf pick up was one of my main reasons for getting a bagger. It works well, even at higher settings, but it's really a function of your blade condition. Some blades have a higher lift because of the shape... That's what sends everything up the chute. If you have heavy lead cover in the fall, the bags fill up quickly, but the dual bags keeps it manageable. Short version: works great but depends on quantity of leaves and blade condition.

• [UNIVERSAL] suitable for most walk behind weeding machines , Including Toro, Craftsman, Honda, Husqvarna, Law Boy, Greenworks and Troy Bilt.
• Luxurious Light Weight Fabric to Protect your Riding Lawn Mower / Tractor
• [KEEP DRY]Lightweight waterproof nylon fabric can keep your mower from water.
• [EASY TO USE] a tough tightening cord at the bottom allows cover to be secured to the machine. No wind can blow it away.
• [EXTENSIBLE WARRANTY] Join Himal Care to extend your lawn mower cover warranty.

User questions & answers

Question:	Does anyone have experience with this product through a Midwest winter
Answer:	Yes. It is ready for any additional optional accessories you would like to purchase.
Question:	I see some comments about the elastic works good but the description says it has a drawstring. Which is it
Answer:	Yes, the bagger part #96073004 is 325.00.
Question:	I have a 42" columbia riding mower will this cover fit
Answer:	No unfortunately this is not. The ones specifically made for hills have a different slip differential which is either the ts242xd or the ts146xd.
Question:	does this have some sort of soft material inside to keep the plastics of the mower from being scratched or worn during wind
Answer:	This model has the hydro-static transmission which is a metal housing.

Product description

Classic Accessories Deluxe Tractor Seat Cover, Black, Small

The Classic Accessories deluxe tractor seat cover offers water-resistant coverage to new seats and makes older seats look and feel new again. The tractor seat cover protects your seat against weather and U. V. damage with a thick cushion providing extra comfort. It has an elastic shock cord in the bottom. A 15-inch hem provides a quick, custom-like fit and handy tool and gear back pockets. The weather-protected fabric cover is coated for maximum water resistance and repellency.

• Fits tractor seat backrests 9.5" - 11"H without armrests, approx. 19”W
• One-year limited warranty
• Storm-X fabric with water-resistant backing for maximum strength, abrasion and weather protection
• Fits seats on most tractor models without armrests
• Protects new seats and makes old seats look new
• Cushioned seat for extra comfort
• Convenient back pockets keep tools and gear within reach

User questions & answers

Question:	Is this cover machine washable
Answer:	I don't think so but, check it out for yourself.
Question:	Will this fit my huscavarna zero turn rz4623 model 967009801 seat
Answer:	I guess it depends on whether or not the magnet stays attached to the hitch pin or not. These seem to have serious quality control issues. Mine works perfectly and I absolutely love it. I think a little epoxy adhesive could solve many of these problems, but you shouldn’t have to repair a new item.
Question:	I have a craftmans 42" 16 hp riding tractor its 11 years old the seat measurements are 18" wide 12" deep 10" high would this medium seat cover fit
Answer:	It is the chrome ring. The hitch pin works very well for me because my garden trailer is all steel. I don't believe it will work for you.
Question:	I need it to fit the cub cadet big country 4x6??? which one fits
Answer:	The packaging says made in China. : /

Product features

Classic Accessories Countoured Tractor Seat Cover

Classic Accessories tractor seat covers protect new seats and make old ones look new again. Keep your seat in excellent condition for years with a lawn mower or tractor seat cover from Classic Accessories.

Storm-X fabric System

Storm-X fabric with water-resistant backing for maximum strength, abrasion and weather protection.

Storage Pockets

Convenient back pockets keep tools and gear within reach.

Elastic Hem Cord

Elastic shock cord in bottom hem for a quick and custom fit.

Storage Bag

Storage bag included.

• 100% WATERPROOF - Beware of other covers claiming “water resistant”! This means they protect only partially and your mower engine will be wet after rain. Our cover has a thick PU rubber coating on the inside and a seam sealing that keep your lawn rider dry even in heavy rains. Two air vents prevent water condensation.
• HEAVY DUTY - Serves x2 times longer! This is our premium product line made of better materials than a standard cover. Marine grade 600D fabric, double stitching and better UV protection ensure durability over time. The fabric stays flexible in winter and does not crack like cheap PVC fabrics.
• EASY TO USE - Elastic hem assures a tight fit around a garden tractor so the cover won't fly-off during windy days and it is much easier to use than drawstring covers. Storage bag included. Universal size fits decks up to 54 inches and measures 72"L x 44"W x 43"H. Check other sizes available for the best fit.
• PROTECTS YOUR INVESTMENT - Keeps your riding lawn mower out of extreme elements (rain, dust, dirt, wind, sun, snow and birds). Perfect weatherproof outdoor storage for yard machine during summer or winter. Olive green color blends into the yard nicely.
• 100% MONEY-BACK GUARANTEE - All our products come with a 1 month guarantee: if you experience ANY problems with your ride on lawnmower cover, we refund your entire purchase. Our products are sold with a 12 month warranty for the original purchaser against manufacturing defects.

User questions & answers

Question:	What is the difference in this cover and the other one you sell except for price ($35.95 vs $44.95) as both fit a 54 " deck
Answer:	Don't know what a rd 354x looks like
Question:	Will it fit over the grass catcher attached on my John Deere S240 mower
Answer:	Hi Soonja. I don't see why not, since all riding mowers are similar, as far as shape is concerned. But unfortunately, there’s just no way for us to test for compatibility with all of our competitors' products, so I can't guarantee fit. Sorry I can’t be more helpful. Thank you for considering Husqvarna for your outdoor power equipment needs.
Question:	Will it cover john deer d-105 tractor
Answer:	It will fit up to a 54 inch deck, but not 0 turns.
Question:	What does the warranty cover
Answer:	Yeah, it covers the tractor, but not the bagger.

Product description

Pro-Lift T-5335a lawn mower lift is a 350 lbs. and it’s giving you the room and stability to work safely on lawn mowers in three easy steps Lawn mower lift that provides the ability to lift 23 inches from ground to wheel saddle to give you the maximum space to perform necessary mower maintenance. It is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches, which it also features the hydraulic foot pedal operation and it gives you the option to lift up your mower effortless. Ability to lower the lift, the users can put the mower in neutral and raise lift platform slightly to disengage height locking levers, then with the universal design. Specifications: • Capacity: 350 lbs. • Lifting height: 23 inch • Wheel span: 40-3/4 to 49-3/8 inches • Item weight: 55 lbs. Pro lift T-5335a lawn mower lift is backed by one year from the date of the purchase.

• Safety lock for safely supporting the load
• Rubber padded platform to prevent scratching and to protect your machine
• Non-slip foot pedal allows effortless lifting the load
• Easily maneuverable and adjustable for a wide variety of machine

User questions & answers

Question:	Where is this made
Answer:	I checked the product to be sure, it states that it is "Made in China".
Question:	does it fold up for storage
Answer:	It folds up best if you just use loose bolts to secure the so called wheel baskets. remove them and store it on a 18" deep shelf. The pump jack is the height restriction for the shelf.
Question:	Is it a hydrualic
Answer:	The lifting mechanism is just a hydraulic bottle jack, which has a bracket to mount it within the framework of the lift. The bottle jack is operated by a foot pedal.
Question:	Will this lift be suitable for a poulan pro zt 48” mower
Answer:	I use my lift on my commercial Ferris IS2600Z with a vehicle weight of 1600#. Yeah, it'll handle your home owner mower.

Product features

Mower Jack Lift for Tractors and Zero Turn Lawn Mowers

To Safely Supporting the Load.

Rubber Padded Platform

Prevents from Scratching and Protects Your Lawn Mower.

Non-Slip Foot Pedal

Allows Effortless Lifting the Load.

Drive Mower Onto Wheel Baskets

Positions mower tire securely on wheel baskets centering the load on the lift.

To Raise the Lift

Turns the release valve clockwise until firm resistance is felt. Carefully pumps jack until mower reaches desired height. Final height must correspond with the locking teeth on the Height Locking levers.

Secure Locking Lever

Carefully turn the Release valve counter clockwise, slowly, until the Lift Platform locking levers engages the Height Locking Levers then close the release valve by turning it fully clockwise until firm resistance is felt.

To Lower the Lift

Pumps the lift Pedal several times to disengage the Height Locking Levers. Carefully turn the Release valve counter-clockwise, slowly, but no more than 1 turn from the closed position, to lower the load slow and safe.

Product description

The MoJack EZ Max is a 24" Collapsible lawn mower Jack. It features a unique clutch system for easy lifting & automatic safety system with smooth release handle. The clutch system provides the right amount of torque when lifting a light or heavy duty lawn mower or tractor. The lifting capacity 450 lbs (Lifting the front of the mower, not the total mower weight. Supreme lifting height of 24" High. Wheel span measurement: 18.5" - 47.5" (Inside to outside front tires) to fit most residential Tractor & ZTR mowers.

• Ez max is a lawn mower lift that provides an easy and safe way to lift a zero turn radius mower or lawn and garden tractor
• You can easily lift manually or with a powered drill; EZ max folds flat for easy storage
• The patented design makes them easy to assemble; use and store; MoJack lifts are much safer and more convenient to use than car ramps
• Great for any maintenance - ideal for repairs, blade sharpening, belt Replacement and debris removal.
• Fits most Tractors & mowers - fits most residential tractor and ZTR mowers.

User questions & answers

Question:	How does this connect to a powered drill
Answer:	Both our old Ariens 42" Hydro Riding Mower and newer Cub Cadet ZT2 zero turn ride up and down this ramp with ease, even in the pouring rain. Our yard gets more bouncy than this ramp.
Question:	i bought a lift from tractor supply with max lift of 500 lbs. it will not lift my jd320 with a weight of 650lbs. it lifted my jd135 which weights
Answer:	I load my lawnmower with me on it. I weight 200 lb my lawn mower is 650 lb. no problem.
Question:	Can amazon ship to Puerto Rico
Answer:	Thank you for your inquiry. The gap between the treads is 3.5 inches. Please let me know if you have any questions. Jason, CargoSmart customer support 845-295-9215
Question:	Has anyone used this lift on an ExMark Lazer Z with a 60 or 72 inch deck
Answer:	The weight is 30 lbs.

Product features

MoJack EZ Max Mower Lift w/ 450lbs Capacity

The MoJack EZ MAX is a 24" collapsible lawn mower jack. It features a unique clutch system for easy lifting and automatic safety system with smooth release handle. The clutch system provides the right amount of torque when lifting a light or heavy duty lawn mower or tractor.

Supreme Lift Capacity & Height

The lifting Capacity 450 lbs (lifting the front of the mower, not the total mower weight. Supreme lifting height of 24" high.

Wheel Span Fits Most

Wheel span measurement: 18.5" - 47.5" (inside to outside front tires) to fit most residential tractor and ZTR mowers.

Supreme Lift Capacity & Height

The MoJack EZ MAX Mower Lift features a Lifting Capacity of 450 lbs (lifting the front of the mower, not the total mower weight) and a Lifting Height of 24" high.

Great for Any Maintenance

Ideal for repairs, blade sharpening, belt replacement and debris removal.

Lift Your Mower Manually...

To lift your mower, you can use the hand crank for manual lifting.

Or with a Power Drill!

Alternatively, you can also life your mower with a power drill!

Everything You Need

The MoJack EZ Max Mower Lift has everything you need to get working on your mower: Tower Assembly, Lift Arm, Base Floor Tube, Base, Base Support Channel, Wheel Pads, Safety Straps, Wheels, and Hardware pack.

Foldable for Easy Storage

The MoJack EZ MAX Mower Lift folds flat for easy storage or wall-hanging.

Fits Most Tractors & Mowers

Fits most residential tractor and ZTR mowers.

Wheel Span

Wheel span measurement: 18.5" - 47.5" (inside to outside front tires).

Product description

Marastar's 2 Pack 15x6 00-6 air filled (pneumatic) front tire & wheel assembly is the perfect replacement for Craftsman riding mowers with 15x6 00-6 tires (Check your existing tires sidewall). you don't need to change out an old tube or visit a professional tire shop, simply replace the entire old or damaged tire & wheel assembly with this one. Marastar’s easy to install Replacement comes with a tube-type 4-Ply rated tire with turf Saver tread pre-mounted on dark gray powder-coated steel wheel with a 3” centered hub length, high-quality oil impregnated bushings installed & a grease fitting. Tire repair & replacement made easy - also included 3 x 0. 08” thick washers & an extra e-clip to make this the practical tire & wheel solution for Craftsman mowers with 15x6 00-6 front tires.

• Tire: 2 pack 15x6. 00-6 tube-type turf SAVER tread - pneumatic 4 Ply rating
• Wheels: Solid dark gray steel, 3" Centered hub, 3/4" Sintered iron bushings
• Load capacity/speed: 400 lbs. / not for highway speeds
• Use: replacement for Craftsman riding mowers with front tire size 15x6. 00-6
• Low hassle, low cost solution to repairing or replacing your Craftsman riding Mower tires
• Check your existing tire sidewall for tire, hub, and bushing size to ensure proper replacement fit.

User questions & answers

Question:	Will these tires work on the craftman yts 4500 tractor
Answer:	I like the tires a lot. If they are the same size as your current tires they should work fine. On my sears lawn tractor all I had to do was jack the tractor up, remove the pin from the axle, slide the old tire off, and slide the new inflated tire on.
Question:	Will these fit a Kubota
Answer:	I do not know check the hole size on your tractor and match it to your new wheels
Question:	Do these tires fit a John Deere 10 cu ft utility trailer/cart
Answer:	If it has a 5/8" axel, then it probably will fit.
Question:	will they work on lawn cart
Answer:	They should if the axle is 3/4 inch.

• Functional features: not easy to crack, waterproof, heat-resistant and ventila permeability
• Three pockets: Having pockets on the back of the seat cover for any items you may need while mowing like gloves, tools, rags, pruners,trash bag and such.
• Antiskid design: Non-skid surface,has some cushioning that makes sliding less likely.There is a fastening buckle on the back to strengthen the anti slip
• Easy to use: At the bottom has elastic hem encircles the seat,make it very convenient to install, just take about 10 seconds.
• Service: Himal provides a true satisfaction guarantee and don’t hesitate to contact us if there is any problem.

User questions & answers

Question:	What size fits a john deere S1642 riding lawnmower
Answer:	Seems like a better built mower to me.
Question:	I have a 46 inch cut lawn tractor. Will this seat cover fit
Answer:	60 in
Question:	What size small medium or large for standard craftsman seat
Answer:	Yes, it's fully assembled in crate form. It takes about 40 mins to uncrate and start up. You do have to attach the battery cables, but other then that, its all good.
Question:	Himal why do you not give us measurements so we can figure out which size to order s, m, or l for my cub cadet
Answer:	This machine will have a 3 Year Warranty. Service is available at dealers everywhere.

Product description

Performance and style hit the grass running with Husqvarna’s Z200 series of zero-turn mowers. Cutting-edge design, proven performance and innovative features combine to make lawn maintenance an event instead of a chore. Featuring a 54 in. reinforced steel cutting deck, the Z254 mower is powered by a 26 HP Kohler engine. Plus, an innovative, maintenance-free transmission makes this an easy mower to own, season after season. Look no further for your next turf cutting machine.

• 26 HP Kohler engine provides reliable startups and a max speed of 6.5 MPH
• A patent-pending park brake system automatically activates or deactivates as the steering levers are moved outward or inward
• Air induction mowing technology draws air from the top and bottom of the deck, improving grass and delivering a superior cut
• Reinforced steel stamped cutting deck is made of heavy flat-stock steel for maximum durability
• Clippings can be discharged, mulched or bagged (mulching kit and bagger attachment sold separately)

User questions & answers

Question:	What size is the rear tires and how does it perform on a hill
Answer:	Don't recall the tire size but performance on grades is not good, Going around the hill, the tire on the high side loses traction. going down hill both tires lose traction. Does better going up hill.
Question:	Does this have a power assisted bagger/colector attachment
Answer:	It comes as pictured (non-mulching blades and basic discharge). Unless your mowing a field, highly reccomend getting the multching blades & cap for the discharge. If not, you'll be blowing grass clippings 10 feet.
Question:	Forward Ground speed
Answer:	The max forward ground speed is 6.5 mph
Question:	Where can I purchase replacement blades for this mower? Specifications says blades are 18-1/4" (that is correct, I measured them) but all the blades l
Answer:	Our local Ace Hardware services these mowers so i am sure they have the correct blades

Product description

Riding Lawnmowers have the power and the low center of gravity to be natural towing machines.

With the Lawn-Pro Hi-Hitch, a regular riding mower can be transformed into one of the handiest tools ever for pulling small trailers. Whether you’re hauling off trash on a utility trailer, bringing up firewood or just positioning your ski boat in your garage, the Hi-Hitch gets the job done! The Hi-Hitch is braced and positioned perfectly at just the right height to keep trailers level and well-balanced. With super-strong aircraft aluminum construction, the Hi-Hitch provides a lot of “horsepower” with very little weight added to the machine. Installs easily and accepts all conventional trailer-hitch balls with 3/4 " shank or smaller. The Hi-Hitch mounts to all conventional riding lawnmowers with a minimum of drilling or modifications. NOTE: Trailer hitch ball not included. Made with Pride in the USA!

• PULL WITH EASE: the Lawn-Pro Hi-Hitch transforms a regular riding mower into one of the handiest tools ever for pulling small trailers; now you can haul off trash on a UTV, bring up firewood or just place your ski boat into garage quickly and easily
• EASY AND SOLID INSTALLATION: the Lawn-Pro Hi-Hitch installs quickly and easily with a minimum of drilling or modifications; The Hi-Hitch is braced and positioned perfectly at just the right height to keep trailers level and well-balanced
• ROBUST HOUSING: the Lawn-Pro Hi-Hitch is constructed of super-strong aircraft aluminum and finished in a super-tough black powder-coat enamel for years of good looks and lasting dependable service
• POWERFUL DEVICE: The Hi-Hitch provides a lot of “horsepower” with very little weight added to the machine
• MOUNTING: The Hi-Hitch mounts to all conventional riding lawnmowers; accepts all conventional trailer-hitch balls with 3/4 " shank or smaller; trailer hitch ball NOT included

User questions & answers

Question:	Would this work on a Deere D155 to pull a 450lb wood splitter
Answer:	For on road everyday driving personal SUV/truck I would check with your local police dept. As far as off road recreation vehicle, atv, go kart and so on yes these can be wired directly into your stock wiring harness but use the fuse that's included as your electrical life line protection. You don't want to burn your stock harness up.
Question:	Does this bolt up to a 20 year old john deere lt
Answer:	No. Have not and bolt so need bracket or drill holes to mount.
Question:	Does it fit a John deere la
Answer:	Yes, but you'll need a separate relay and switch.
Question:	Will this fit John Deere 700 series mowers without modification
Answer:	I have had nothing but problems with this my self and my personal opinion is that it a waste of money. The wiring harness has has been changed and then the switch and now it's out again so I'm just going to take the whole thing off and just throw it away yes I'm going to throw it away and chalk it up a learning experience

Product features

Great Day Lawn Pro Hi-Hitch

Riding Lawnmowers have the power and the low center of gravity to be natural towing machines. With the Hi-Hitch, a regular riding mower can be transformed into one of the handiest tools ever for pulling small trailers. Whether you’re hauling off trash on a utility trailer, bringing up firewood or just positioning your ski boat in your garage, the Hi-Hitch gets the job done!

It's a Great Day!

Great Day, Inc. is a company whose name literally 'speaks' the outlook and the attitude by which we operate. Even our logo brings to mind a refreshing awareness and appreciation of the opportunities each new day brings.

We're located in Tallulah, Louisiana, a small farming community in the heart of the delta of the mighty Mississippi.

Our product line has one common denominator. Everything we offer is the best of its kind - unique, dependable and functional. We are a little different from the norm - we refuse to compromise quality, to cut corners.

Each of our products begins as an idea to fill a legitimate need - then begins the path to perfection.

We are one of the many small manufactures in this country that clings to the belief that with God's help, a lot of the hard work and persistence, quality products can be produced here in the United States. And that America can be restored to the level of honor and respect it once enjoyed.

God Bless!

Paul Meeks, CEO.

Product description

Protective cover fits most lawn and garden tractors with decks up to 54". heavy duty coated fabric for water and freezer protection. Includes storage bag and reflective logos.

• Decks up to 54"
• Heavy duty coated fabric
• Includes storage bag
• Made in United States

User questions & answers

Question:	Will this work on Husqvarna Ts 354x with bagger
Answer:	I don't know. What is the front wheel base?
Question:	Can this cover ryobi model# ry48111 electric riding lawn mower
Answer:	The jack is Part Number T-5305-1, and you can find replacements online, but for $65 to $85. I would think you could find a rebuild kit for much less. Normally, it is just a failed o'ring, which should cost less than $5.00, or you could take the jack to a hydraulic repair shop. Either way, you would save a lot of money.
Question:	Does this fit the TS 348xd
Answer:	The baskets on the lift 19inches inside to inside and 42.5 inches outside to outside. I took these measurements from the iside edges of the lift baskets.
Question:	Will this work with a bagger attached
Answer:	The wheel width would have to be between 19 1/2" and 43 1/2". Plan B would be to buy the adapter, which allows the lift to pick up a push mower. The adapter is basically a set of fork-lift style beams that attach to the wheel baskets and extend about 36" from the baskets. The Pro-Lift part number is T-5310, and they run between $39.99 at Tractor Supply to $83 on Amazon.

• [Ultra Waterproof] Made of 600D premium polyester fabric with excellent PU coating which can achieve 100% impervious water.
• [More Durable] Replace original 210D polyester with 600D heavy duty fabric. Thicker enough to resist wearing and tearing. UV protection to against fading.
• [Widely Fit] Fits lawn tractors with decks up to 54 inches, including Toro, Craftsman, Honda, Husqvarna, Law Boy, Greenworks, Troy Bilt and so on.
• [Fully Protection] Elastic hem ensures close fit with your lawn mower to avoid blowing away. Keep your mower away from any damage. Unique air vents to prevent your cover condensed.
• [Quality Warranty] Himal outdoors provide a free exchange/refund service within 30 days after purchase and ONE-YEAR Limited Warranty for you. Don’t worry to buy it.

User questions & answers

Question:	Is it rain resistant
Answer:	I have these seat covers on both my garden tractor and ZTR mower. They are very nice and well made. I have not tried to launder them, but I don't see any reason that they would survive just fine.
Question:	My lawnmower has a 42" deck with a bumper guard on the front is this cover large enough to cover the entire lawn mower
Answer:	If your seat looks anything like the seats on say, a Craftsman tractor, then YES it would fit. Check out a local Sears for seat dimensions.
Question:	After a rain are you finding water on the seat
Answer:	yes, with room for extra padding if you want to add some .
Question:	Does this cover have air vents
Answer:	The small measures: 19 x 11.5 inches, Small fits seats with backrest up to 12" highMedium fits seats with backrest up to 15" high

Product features

Himal lawn mower cover

Made of 600 D premium polyester fabric with excellent PU coating ensures durability over time.

Suitable for many lawn mower brands

Suitable for many riding lawn mower brands,including Toro , Craftsman, Honda, John Deere, Law Boy and Troy Bilt and so on.

Powerful protection

Effectively protects against the adverse effects of dust, dirt, sunlight, snow, rain, bird droppings, leaves, water vapor, etc.

Waterproof

With the cover, it can protects the paint, seat, steering wheel, and tires from fading and deteriorating.

Protection

Protect your lawn mower during the bad weather. Keep your lawn mower away from the snow, dust, rain and UV and so on.

Easy to Carry

With a storage bag, you can fold the cover and store when you did not need it. It is portable and convenient.

Product description

Fits all tractors with seats up to 15" high. Protects new seats and renews old seats. Cushion quilting for added comfort. 2 rear storage pockets for tools and gear. Reflective piping for extra visibility. Elastic shock cord bottom for a quick custom fit. 2 Year Warranty. Fits tractor seats with backrests up to 15" tall and no armrests.

• Water resistant and has an elastic shock cord bottom for a quick custom fit.
• Fits seat back heights up to 15 in. with no armrests
• Fits all Husqvarna riding Tractors
• 2-Year Limited

User questions & answers

Question:	Will this fit the husqvarna yth
Answer:	You just take the handle off and attach the drill head to it.
Question:	Which of the dimensions shown are the height of the seat and which are the width and length? Thanks
Answer:	I have the EZ lift rated at 450 lbs and have used it on my JD 300 having a total weight of 550 lbs. Of course, the front end lifting weight is considerably less than total mower weight. The stability of the lift during the process is very stable.
Question:	Will this also work on my zero turn seat
Answer:	Yes
Question:	would this fit on a z
Answer:	Will this work on a 60 inch woods ztr