14 best bolt nuts for ariens

Product description

Ariens OEM 1/4" Shear Bolt and Nut 53200500-2 6 Pack

The 1/4 inch shear bolts from Ariens are designed to snap if the auger clogs or jams because of debris. The bolts are made to break at specified load limits. Total of Six Bolts and Nuts Part # 53200500 Fits Ariens ST20E, ST22E, ST24E Will NOT fit Ariens Deluxe or Platimun series snow blowers

• Ariens OEM Part
• Set of Six

User questions & answers

Question:	how long are these
Answer:	Yes. They both work the same way. In fact, concrete is much stronger so it works better!

Product description

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm the exact product needed. It is your responsibility to confirm this is the correct product you require; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Be sure to review photos, specifications, and bullet points closely to verify this is the correct product for you. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product you are looking for, please ask. If you seek assistance we will need as much information as possible to help you find the product you are looking for. Our knowledgeable product specialists are always willing to help ensure that you’re getting the correct product. Stay rugged, my friend

• Snowblower Shear Pin/Bolt. Includes Bolts/Nuts. Replaces Ariens 52100100
• Fits new 2007 model series 921001, 921002, and 921003

User questions & answers

Question:	Is the diameter of these bolts
Answer:	Yes, I have used over 2 dozens of these bolts exactly in that condition and it is working fine, holding strong in sunny or shady areas. As with any masonry drilling make sure you have a good impact/hammer drill and good quality bit, that you find at box stores or Amazon. Hope this helps you.
Question:	what is the length
Answer:	3/4"

Product description

OEM# 52100100 | | | FITS MODELS: 2007 + Model Series 921001 921002 921003

• OEM# 52100100
• FITS MODELS: 2007 + Model Series 921001 921002 921003

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

Product description

Fits Compact snowthrowers. Also fits models ST524, ST624, ST724, ST824, and ST520. Will also replace John Deere AM123342

• Price is for 10 Shear Pins and 10 nuts.
• 1-9/16 X 1/4 thread with lock nut. (1-7/16 to head)

Product description

Ariens Shear Bolt Part Number: 52100100



Substitutes/Replacement for: 00659100





Ariens OEM Shear Bolts 12-Pack Part # 52100100

• Genuine Ariens Product, OEM Part Number: 52100100
• Fits Ariens: ST24E, ST24ET, ST24DLE, ST24LE, ST26DLE, ST26DLET Pro, ST27LE, ST27LET, ST28LE, ST30LE, ST30DLE, ST30LET, ST32DLE, ST32DLET, ST36DLE, ST824E, ST924DLE, ST924LET, ST927LE, ST927LET
• Fits Ariens: ST9526DLET, ST1027LE, ST11526DLE, ST11528DLE, ST11528DLET, ST1130DLE, ST1130LET, ST1130DLE, ST1332LE, ST1332DLE, ST1332DLET, ST1336DLE
• Fits Ariens: Pro 28, Pro 28 Hydro, Pro 28 EFI Hydro, Pro 28 Hydro Track, Pro 32, Pro 32 Hydro, Pro 32 Hydro 12V, Pro 36 Hydro, Pro 36 EFI Hydro, Pro Track 28, Pro RapidTrak 28, 12V Pro 32, Pro
• Fits Ariens: Platinum 24, Platinum 24 SHO, Platinum 24 SHO EFI, Platinum 28 SHO Track, Platinum 28 RapidTrak, Platinum 30, Platinum 30 SHO, Deluxe 24, Deluxe 28, Deluxe 28 SHO, Deluxe 30, Deluxe 30

Product description

Ariens 52100100 Deluxe Shear Pins 3pk. The Ariens Shear Bolts Kit is designed with detailed specifications to fit our Sno-Thro units. These material, process and dimensional specifications ensure high uniformity and accuracy so the shear bolts rupture at the designed load limits every time.

• Genuine Ariens Product, OEM Part Number: 52100100
• Fits Ariens: ST24E, ST24ET, ST24DLE, ST24LE, ST26DLE, ST26DLET Pro, ST27LE, ST27LET, ST28LE, ST30LE, ST30DLE, ST30LET, ST32DLE, ST32DLET, ST36DLE, ST824E, ST924DLE, ST924LET, ST927LE, ST927LET
• Fits Ariens: ST9526DLET, ST1027LE, ST11526DLE, ST11528DLE, ST11528DLET, ST1130DLE, ST1130LET, ST1130DLE, ST1332LE, ST1332DLE, ST1332DLET, ST1336DLE
• Fits Ariens: Pro 28, Pro 28 Hydro, Pro 28 EFI Hydro, Pro 28 Hydro Track, Pro 32, Pro 32 Hydro, Pro 32 Hydro 12V, Pro 36 Hydro, Pro 36 EFI Hydro, Pro Track 28, Pro RapidTrak 28, 12V Pro 32, Pro
• Fits Ariens: Platinum 24, Platinum 24 SHO, Platinum 24 SHO EFI, Platinum 28 SHO Track, Platinum 28 RapidTrak, Platinum 30, Platinum 30 SHO, Deluxe 24, Deluxe 28, Deluxe 28 SHO, Deluxe 30, Deluxe 30

User questions & answers

Question:	I ordered these 52100100 bolts but what arrived (and what I see in others' pictures) are 72100100. Are these the same with just a new model number
Answer:	374 pounds but is cheaply made. I didn’t use them and bought a different anchor. I do not recommend them
Question:	Is this a single bolt or a 3 pack
Answer:	For M8, it needs 12mm drill to drill the hole, if M6, it needs 10mm drill
Question:	Does anyone know what grade these are
Answer:	We have to use them on all four corners of an air conditioning bracket on the side of a house. If you contact Red Head they should be able to give you a chart that shows all their sizes with the weight supportability.
Question:	Will this fit the
Answer:	If it’s a 1/2” diameter sleeve anchor you drill a 1/2” hole. Make sure you drill the hole deep enough. This anchor does not have to bottom out in the hole whereas stud anchors do. These sleeve anchors get their strength from the wall of the hole expanding against it.

Product description

Set Of 3 Shear Pin Bolt & Nuts

Part №: 52100100, 521001;

For: Ariens;

Fits: 2007 + Model Series 921001 921002 921003 Snow Blower;

• Set Of 3 Shear Pin Bolt & Nuts
• Part №: 52100100, 521001

User questions & answers

Question:	Are these really ariens? they don’t look the same as the oem bolts. is your store a genuine ariens store
Answer:	Cinder block is not concrete these are made for concrete cinder block will just breakup

Product description

Protects Your Snowblower - Purposely designed to snap if the auger jams or clogs - Manufactured to rupture at the designed load limits - 5/16" Diameter Fits Ariens Professional two-stage snow blowers - Single bolt is Ariens part number 51001500 - Check your Owner's Manual for the correct part number 3-Pack - Replace both existing shear bolts if necessary - One spare, just in case

• Ariens 51001500 Professional Shear Pins 3pk. The Ariens Shear Bolts Kit is designed with detailed specifications to fit our Sno-Thro units. These material, process and dimensional specifications ensure high uniformity and accuracy so the shear bolts rupture at the designed load limits every time.
• Protects Your Snowblower - Purposely designed to snap if the auger jams or clogs - Manufactured to rupture at the designed load limits - 5/16" Diameter Fits Ariens Professional two-stage snow blowers - Single bolt is Ariens part number 51001500 - Check your Owner's Manual for the correct part number 3-Pack - Replace both existing shear bolts if necessary - One spare, just in case

User questions & answers

Question:	Will these work with and Arien st824le
Answer:	Outside 3/8. Drill a 3/8 hole bolt size is 5/16 takes a 5/16 -18 nut
Question:	Do the bolts come with lock nuts as shown in the picture
Answer:	Yes, nuts and washers are provided, just like the picture. Drill a clean hole deeper than you think you need in the cement and these will work great. Tighten with a small (3/8 drive) impact wrench reduces the bolt spinning and resulting frustration.
Question:	I just got a new thrower and I would like to have backups. Should I order some now
Answer:	Absolutely assuming you properly install.
Question:	How often do these need to be replaced
Answer:	Yes you can, just remove the head knock the sleeve into the wall

Product description

Ariens 53200500 Compact Shear Pins 3pk. The Ariens Shear Bolts Kit is designed with detailed specifications to fit our Sno-Thro units. These material, process and dimensional specifications ensure high uniformity and accuracy so the shear bolts rupture at the designed load limits every time.

• Ariens 53200500 Compact Shear Pins 3pk. The Ariens Shear Bolts Kit is designed with detailed specifications to fit our Sno-Thro units. These material, process and dimensional specifications ensure high uniformity and accuracy so the shear bolts rupture at the designed load limits every time.
• Protects Your Snowblower - Purposely designed to snap if the auger jams or clogs - Manufactured to rupture at the designed load limits - 1/4" Diameter Fits Ariens Compact two-stage snow blowers - Single bolt is Ariens part number 53200500 - Check your Owner's Manual for the correct part number 3-Pack - Replace both existing shear bolts if necessary - One spare, just in case

User questions & answers

Question:	Will these fit an Ariens 1128? The manual doesn't seem to specify the size or part number
Answer:	Don't know for sure, they are a replacement for a shear pin that is 5/16 and seem to fit OK.
Question:	Will this fit a Ariens
Answer:	from under the head of the bolt to the end is 1.81".
Question:	Will these fit model
Answer:	Total length 1-9/16”
Question:	I have an Ariens 624E is this the correct shear pin? Mone are gold in color
Answer:	6''

Product description

OEM# 53200500, 05907100, & 51001600. FITS MODELS - Ariens ST524, ST624 and ST724.

• OEM# 53200500, 05907100, & 51001600
• Fits Ariens ST524, ST624 and ST724

User questions & answers

Question:	Will they fit my Aries compact
Answer:	No. Most likely you need the 51001500.

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

• (10pk) 916 Rotary Shear Pins & Lock-Nut Compatible With Ariens 510015, 051001500

User questions & answers

Question:	What are the dimensions of this product
Answer:	2

Product description

Ariens OEM Snow Blower 24" Scraper Bar Part # 03884451 Fits · 920402 (123000 - 174999) Sno-Tek 24 E-->Housing - 24 Inch · 920402 (000101 - ) Sno Tek TEST-->Housing - 24 Inch · 920313 (126000 - ) Sno-Tek 24 E-->Housing - 24 Inch · 920402 (175000 - ) Sno-Tek 24E-->Housing · 920405 (000101 - ) Sno-Tek 24-->Auger And Chute · 920402 (075000 - 122999) Sno-Tek 24-->Auger And Chute · 920403 (075000 - 122999) Sno-Tek 28-->Auger And Chute · 920313 (000101 - 122999) Sno-Tek 24 CE-->Auger And Chute · 920314 (000101 - 122999) Sno-Tek 28 CE-->Auger And Chute · 920315 (000101 - 122999) Sno-Tek 22-->Auger And Chute · 920313 (123000 - 125999) Sno-Tek 24 240V CE-->Auger and Impeller · 920314 (123000 - 125999) Sno-Tek 28 240V CE-->Auger and Impeller · 920315 (123000 - 125999) Sno-Tek 22 240V CE-->Auger and Impeller · 920320 (000101 - 999999) Sno-Tek 20 Recoil CE-->Auger and Impeller · 920324 (000101 - 999999) Sno-Tek 22 240V CE-->Auger and Impeller · 920402 (035000 - 074999) Sno-Tek 24-->Auger And Chute · 920403 (035000 - 074999) Sno-Tek 28-->Auger And Chute · 920404 (035000 - ) Sno-Tek 24-->Auger And Chute · 920304 (000101 - ) Sno-Tek 22, LCT engine, 22"-->Auger and Chute · 920305 (000101 - ) Sno-Tek 24, LCT engine, 24", 240V, electric-->Auger and Chute · 920306 (000101 - ) Sno-Tek 26, LCT engine, 26", 240V, electric-->Auger and Chute · 920309 (000101 - ) Sno-Tek 24, LCT engine, 24"-->Auger and Chute · 920402 (000101 - 034999) Sno-Tek 24, LCT engine, 24", 120V, electric-->Auger and Chute · 920403 (000101 - 034999) Sno-Tek 28, LCT engine, 28", 120V, electric-->Auger and Chute · 920310 (000101 - ) Sno-Tek 22, LCT engine, 22", 240V, electric-->Auger and Chute · 920400 (000101 - ) Sno-Tek 24--&g

• Sold on Amazon

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year