14 best snapper mowers

Product description

MaxPower's 331302 includes 1 mower blade for many 21 in. cut and 41 in. cut Snapper steel deck mowers. Two blades are required for a 41 in. cut diameter. This blade replaces OEM #s 1-9645, 1-9795, 7017002, 7019645, 7019702, 7019795, 7019795BZ, 7019795BZYP, 7026691 and Windsor 50-2675. It measures 20-3/4 in. L and 2-3/4 in. W with a 3/8 in. center hole diameter. To ensure proper fit, please verify the OEM # of the blade you are replacing matches the OEM # listed in this description. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specification.

• Includes 1 blade for many 21 in. cut and 41 in. cut Snapper steel deck mowers
• Replaces OEM #'s 1-9645, 1-9795, 7017002, 7019645, 7019702, 7019795, 7019795BZ, 7019795BZYP, 7026691 and Windsor 50-2675
• Measures: 20-3/4 in. L and 2-3/4 in. W
• 3/8 in. center hole diameter
• Manufactured to meet or exceed all OEM specifications

Product description

MaxPower's 561311B includes 3 blades for many 42-in./61-in. cut Snapper mowers. Also fits Scag, Ferris, Simplicity, Gravely, Bobcat and other mowers. These blades replace OEM #'s Snapper/Kees 5101755, 5101755BMYP, Bad Boy 038-6080-00, 5208425, Ferris 15208425, 5020842, 5020842S, 5101755, 5208425, Great Dane C39949, Husqvarna 539-105711, Lesco 050170, Scag A48111, 48111, 481708, 482879, Windsor 50-3160, Wright 71440003. Each blade measures 21 in. L and 2-1/2 in. W with a 5/8 in. center hole. Check your owner's manual to verify that the OEM number of the blade being replaced matches one of the OEM numbers provided for this item. Maxpower blades are manufactured to meet or exceed OEM specifications. Proudly made in the USA.

• Includes 3 blades for many 42-in./61-in. cut Snapper, Scag, Ferris, Simplicity, Gravely, Bobcat and other mowers
• Replaces OEM #: Bad Boy 038-6080-00, 5208425, Ferris 15208425, 5020842, 5020842S, 5101755, 5208425, Great Dane C39949
• Replaces OEM #: Husqvarna 539-105711, Lesco 050170, Scag A48111, 481708, 482879
• Replaces OEM #: Snapper/Kees 5101755, 5101755BMYP, Windsor 50-3160, Wright 71440003
• Each blade measures 21 in. L and 2-1/2 in. W

Product description

Verify part fits before purchasing Spec:Description: Hi-Lift BladeLength: 28"Center hole: 1 1/16"Outer Hole: 9/16"Width: 2 3/4"Thickness: 0.187"Packaging type: Branded labelReplaces OEM NUmbers:Snapper: 1-9515, 7019515, 7019515BMA, 7019515BZ, 7019515BZYPCompatible with:Snapper: 28" deck rear engine rider

User questions & answers

Question:	Dimensions do not meet a Snapper 33”! What does this actually fit
Answer:	I have not used them outside. I use them for chair weaving. It is metal and over time outdoors very likely will rust.
Question:	Does it need to be sharpened before it is installed
Answer:	I do not think these would work on mitered corners. These are like strong clothes pins, they won’t clamp a corner. These are better for pinching things together.

Product description

MaxPower's 331304B includes 1 mower blade for many 28 in. cut Snapper mowers. This blade replaces OEM #s 1-9515, 7019515, 7019515BZYP and Windsor OEM # 50-3555. It measures 28 in. L and 2-3/4 in. W with a 1-1/16 in. center hole diameter. To ensure proper fit, please verify the OEM # of the blade you are replacing matches the OEM # listed in this description. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specification.

• Includes 1 blade for many 28 in. cut Snapper
• Replaces OEM #'s 1-9515, 7019515, 7019515BZYP and Windsor OEM # 50-3555
• Measures: 28 in. L and 2-3/4 in. W
• 1-1/16 in. center hole diameter
• Manufactured to meet or exceed all OEM specifications

User questions & answers

Question:	Do you have to sharpen blade before use
Answer:	No, I have not had to do that.
Question:	Is this a mulching blade
Answer:	This is a good strong clamp and I would use a flat buffer between clamp and veneer to avoid a "dent".
Question:	do you have to sharpen blade before use or just get the paint off
Answer:	They open about 3"s and the clamping surface is about 1".
Question:	Is this the right blade for the hivac
Answer:	Each clamp weights approximately 6 ounces.

Product description

Verify part fits before purchasing Spec:Description: Hi-Lift BladeLength: 20 11/16"Center hole: 3/8"Outer Hole: 3/8"Width: 2 3/4"Thickness: 0.164"Packaging type: Branded labelReplaces OEM NUmbers:Snapper: 1-7002, 1-9645, 1-9702, 1-9710, 2-6691, 7019795, 7019795BZ, 7019795BZYP, 7026407, 7026407AYPCompatible with:Snapper: most commercial 21" mowers; LT11000; requires 2 for 41" deck

User questions & answers

Question:	what blade does a snapper 42 "cut take sn
Answer:	No.
Question:	need a 21" blade for a snapper mower self repeal front wheel drive 175cc
Answer:	These hold nicely and lock pretty well.
Question:	Do this blade make mulch mess or make clean lawn
Answer:	These clamps will hold stock ranging from 0 inches to approximately 1/2 in.
Question:	Will this fit 1998 snapper mower
Answer:	yes i feel that it should work. they open pretty wide and have plastic over the ends so u dont scrape what you are pinching together

Product description

**Verify part fits before purchasing**

Specs:

Description: OEM Replacement Belt

Belt Application: Drive

Belt Type: Double V

Length: 74"

Width: 1/2"

Packaging type: Branded sleeve

Replaces OEM Numbers:

AL-KO: P138710232

Murray: 1001223, 1001223MA, 710232

Ref No: AA71, AA73

Snapper: 1-8236, 2-2252, 7018236, 7022252, 7022252YP

Compatible With/Replacement For:

Snapper: 7-14 series (steering wheel models) 25", 26", 28", 30" and 33" decks; models 0-6 (handle bar models) 33" deck

• Specs: Description: OEM Replacement Belt, Belt Application: Drive, Belt Type: Double V, Length: 74", Width: 1/2", Packaging type: Branded sleeve
• Replaces OEM Numbers: AL-KO: P138710232, Murray: 1001223, 1001223MA, 710232, Ref No: AA71, AA73, Snapper: 1-8236, 2-2252, 7018236, 7022252, 7022252YP
• Compatible With/Replacement For: Snapper: 7-14 series (steering wheel models) 25", 26", 28", 30" and 33" decks; models 0-6 (handle bar models) 33" deck
• Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order.
• Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging.

User questions & answers

Question:	Will thisfit a part number 7075235yp
Answer:	Dear friend, The spring clamps are made in China. They are made of nickel-plated steel which ensures the durability and rust prevention. The rubber sleeve at the tip can protect the surface of the workpiece. Hope this helps. Thank you! Kaya Depot
Question:	Is this belt biveled on both sides
Answer:	Dear friend, All material of the spring clamps are in accord with California 65 Proposal, that will ensure the security to anyone who use them. It is ok to use in the rooms. Hope this helps. Thank you! Best regards, Kaya Depot
Question:	Will this fit my snapper 281022BE
Answer:	Dear friend, These spring clamps are made of nickel-plated steel which ensures the durability and rust prevention. Hope this helps. Thank you! Kaya Depot
Question:	Will this fit model LT145h33gbv
Answer:	Did not come with the bench dog，Just these toggle clamps

Product description

Snapper 7074453 Muffler Replaces: Snapper 7-4453, 74453. Used on OHV single cyl. Briggs & Stratton engines on rear engine riders.



Replaces:

• SNAPPER/KEES 7074453
• SNAPPER/KEES 7-4453
• SNAPPER/KEES 74453
• SNAPPER/KEES 7074453YP

• Rotary Brand Part number 13625
• Aftermarket Replacement Parts
• Sold & Shipped by Over The Hill Tractor
• 034761136258
• Ship from Virginia

User questions & answers

Question:	Will this fit a 14.5 briggs and stratton rear engine snapper
Answer:	This is for a 28" deck mower, and it fit perfectly.
Question:	need a muffler for model # 7800920-00 serial # 2016398236, will this work
Answer:	My blade did not need to be sharpened before installation.
Question:	What bolts or gasket (if needed) are used to install this muffler? i have a 16hp ohv on snapper model sr1642. part numbers? thanks
Answer:	Please make sure you have very strong hand before using these. To answer your question, I think YES--especially for strength. I use similar smaller one in many different ways.
Question:	Does this fit a snapper hi vac 28 with a Briggs 12.5 HP motor
Answer:	Dear friend, The jaw opening of spring clamps is 2 inch. You can also find the detailed dimensions on the second image of listing page. Hope this helps. Thank you! Best regards, Kaya Depot

Product description

**Verify part fits before purchasing**

Specs:

Description: Hi-Lift Blade

Length: 30"

Center hole: 1 1/16"

Outer Hole: 9/16"

Width: 2 3/4"

Thickness: 0.187"

Packaging type: Branded label

Replaces OEM Numbers:

Snapper: 1-8069, 7018069, 7018069BMA, 7018069BZ, 7018069BZYP

Compatible With/Replacement For:

Snapper: 30" rear engine riders

Product description

MaxPower's 330240B includes spindle assembly for snapper/keeps. This assembly replaces snapper/keeps 1735326, 1735326YP, 7502226YP, & 7600211YP. Includes 1 housing #1735573, 2 bearings #1735399, 2 spacers #1735328, 1 shaft #1735326, 2 shields #1735323, 2 locking rings #1967066 all MaxPower products are manufactured for peak performance & durability.

• Replaces OEM #: Snapper/keeps 1735326, 1735326YP, 7502226YP, 7600211YP
• Includes spindle assembly for Snapper/keeps
• Includes 1 housing #1735573, 2 bearings #1735399, 2 Spacers #1735328, 1 shaft #1735326, 2 shields #1735323, 2 locking rings #1967066
• No assembly required

User questions & answers

Question:	Will this fit a snapper 285 z 52 inch deck
Answer:	No, we just installed ours about three weeks ago. It’s doing great with no sharpening needed!
Question:	Does this have the star shaft that fastens the blade? i have a zts26520 52" craftsman zts 6000 and the blade mounts do not have a star for the blade
Answer:	no
Question:	Will this fit a craftsman zts7000 42"deck model
Answer:	No, you do not need to sharpen or take paint off! Just install & use!
Question:	will this fit on a madel 269 1202 00? 2013 snapper? If holes aren't threaded, what size tap would I use to thread them
Answer:	Not sure about that

Product description

Keep it running - keep it genuine. Help keep your outdoor power equipment running at peak performance by ordering Briggs & Stratton replacement & maintenance parts. You can find the right part you need including carburetors, Air filters, spark plugs, tune-up kits & other engine repair Parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, Manufactured & tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

• Item Package Dimension: 27.75" L x 5.25" W x 0.5" H
• Fits 28" Snapper push mowers
• Country Of Origin: United States
• Model Number: 7104083BZYP

User questions & answers

Question:	which side is up
Answer:	Check the manufacturer for the right answer
Question:	Does the blade need to be sharpened before using
Answer:	I don't know, my Snappers are rear wheel drive Hi-Vac models.
Question:	Is these blade balance
Answer:	It is not a mulching blade it is a high lift blade. It will leave grass clippings on the lawn. How much of a mess it makes depends on how much grass you are cutting. This blade worked very well when being used to bag the clippings. Hope that helps
Question:	Will his fit a troy-bilt tb130 xp 160cc 21-in with a Honda Motor
Answer:	You have to measure the existing blade. Better to look your mower up on line and see if it matches what that specific mower requires.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

P> replaces Snapper: 1-8188, 7018188. Fits Snapper: 21 inch steel deck commercial Series 0, 1987 with Briggs & Stratton engines. 52-1/2 inch inner wire Length. 49 inch conduit Length.

Product description

Verify part fits before purchasing Spec:Description: Mulching BladeLength: 28"Center hole: 1 1/16"Outer Hole: 9/16"Width: 2 3/4"Thickness: 0.164"Packaging type: Branded labelReplaces OEM NUmbers:Snapper: 1-6980, 7016980, 7016980BZ, 7016980BZYPReplacement For:Snapper: 28" mulching mowers

Product features

Stens Mulching Lawn Mower Blades

Stens Mulching Lawn Mower Blades make use of the grass clippings to help nourish your lawn. The concept behind mulching is environmentally positive. Instead of bagging and disposing of the clippings, why not put them back on the lawn to decompose and add back the nutrients they store? The clippings must be chopped into very fine pieces so they don't leave glass clumps on the lawn. With an expanded cutting edge, mulching blades finely cut and spread the clippings evenly over the lawn.

Working with people who keep lawns and landscapes beautiful

Stens works in partnership with professionals who make a living maintaining outdoor landscapes, so they understand the need of the industry.

Stens has been in the outdoor power equipment business since 1970, building a reputation for supplying parts that work as hard as you do.

The depth of Sten's inventory is extensive

The Stens product line represents replacement parts for more than 200 brands in the marketplace.

You'll find quality-made parts for virtually every make, model and type of outdoor power equipment.

Quality control assurance on every part

Choosing a quality Stens product is a wise decision because equipment downtime is costly to you in lost revenue.

Product description

SERIOUS, HEAVY DUTY BLADES THAT WILL GET THE JOB DONE EVERY TIME Some items we put up for bid or sell in our stores are dropshipped from the factory. In rare cases, the factory may backorder items and cause a delay in shipping. We take every precaution to keep this from happening; however, when it does occur, we will contact the buyer immediately and offer a full refund if the buyer cannot wait. We will work with the bidder any way we can and will work hard to keep everyone posted on the progress of the order.

• NEW SNAPPER RIDING LAWN MOWER / GARDEN TRACTOR / LAWN TRACTOR REPLACEMENT BLADE
• FOR 33" CUT HEAVY DUTY GATOR STYLE MULCHING BLADE
• REPLACES OEM 7019523 (WC-6301)
• LENGTH: 33" CENTER HOLE: 1-1/16" WIDTH: 2-3/4" STEEL THICKNESS: .187"
• MFSRP $50.00

Product description

Loaded with premium features like intelligent load sensing technology, a dual-battery powerhead and StepSense; Automatic Drive System, this Snapper XD 82-Volt MAX lawn mower will exceed your lawn care expectations. The innovative StepSense system matches the pace of the user, so you can focus on the mowing job at hand, instead of manually changing the speed of the mower. A dual battery powerhead houses two batteries giving operators extended run time of up to 60 minutes to help power through the tough task at hand. Get your preferred lawn height every time with the convenient single lever, 7 height-of-cut adjustment. This quiet walk mower requires less maintenance and also has vertical storage capabilities, saving you valuable time and space in your garage or shed.



Maximum initial battery voltage (measured without workload) is 82-volts. Nominal voltage is 72.

Run time, charge time and output capacity may be affected by conditions.

• Step sense automatic drive system, intelligently senses your speed and automatically adjusts the mower's self-propelled feature to match your mowing pace
• Dual-battery powered houses 2 batteries to provide run time of up to 60 minutes
• Intelligent load-sensing technology allows for optimum power levels while you mow for maximum efficiency
• Single lever, 7 position height-of-cut adjustment for ideal lawn height
• 21-inch steel mowing deck with 3-in-1 design to mulch, bag, or side-discharge grass clippings with ease

User questions & answers

Question:	If one purchased this mower on Amazon, how would warranty service work if needed? Thanks
Answer:	I don't know. Not sure what that number is.
Question:	If both batteries are in the mower will the mower continue to operate after the first battery is depleted
Answer:	Yes, kinda forms an upside down t et jangle with bottom "tip" cut off/flat.
Question:	Where is this manufactured
Answer:	No. You should google your snapper model, find parts diagram, find belt part number, put belt part number in amazon search and it should match
Question:	I was wondering if the estimated 45-minute run time is for one battery or for both batteries
Answer:	I have no idea what model that is, I have a 12 horsepower and it was way too big even after adjustment

Product features

StepSense Automatic Drive System

Intelligently senses your speed and automatically adjusts the mowers self-propelled feature to match your mowing pace.

Dual-battery Powerhead

Conveniently houses two batteries for longer run times.

Cut Height Adjustment Lever

Simply mow to your ideal lawn height with this convenient 7 height-of-cut single lever adjustment.

Convenient Vertical Storage

When you're finished mowing, conveniently store your mower upright to save valuable space in your garage or shed.

Up To 60-minutes Of Run Time On Two 2.0 Batteries*

*Run time, charge time and output capacity may be affected by conditions.

21-inch Cut Width On 3-in-1 Steel Deck

3-in-1 mulch/bag/side-discharge options so you can mow to your preferred style.

No Cord

Cordless lithium-ion battery power allows you to get the job done, without the hassles.