9 best corded electric chainsaw

Product description

If you are looking for a high-power, low-noise electric chainsaw for trimming branches and limbs in your yard, the Oregon CS1500 corded chainsaw is the right choice. Save yourself time and hassle, since the CS1500 starts instantly and doesn’t require any gas oil mixing. Tool-less tensioning allows you to tension the chain by just tightening the ring on the side cover – no special tools required. Made by the world's leading saw chain manufacturer, this chainsaw features an 18 In. chain that you can sharpen on the saw in 3 seconds with the pull of a lever. The automatic oiler distributes oil on the bar and chain while the saw, keeping your chainsaw lubricated and preventing premature wear. 15 amps provide plenty of power behind each cut.

• Includes 18” guide bar and PowerSharp chain, which minimizes downtime by allowing you to sharpen your chain right on the saw in 3 seconds or less.
• Get to work right away with the instant start capability
• The chain stays oiled using the built-in Lubri-Tec oiling system which reduces chain friction and increases the saw’s run time
• No assembly required; comes pre-assembled
• Low noise, silent between cuts. Chain brake for added safety

User questions & answers

Question:	dose it have a metal drive gear thanks
Answer:	The PowerSharp chain and sharpening stone are sold and replaced together as a set. They are available here on Amazon, or from any Oregon dealer. The Oregon part number, in the owner's manual, is 571037. Note that this saw can also be used with conventional 3/8 inch, low profile, .050 gauge chain (S62), available at most hardware stores or home centers, although, this chain will have to be conventionally sharpened.
Question:	Can this cut an 8-inch diameter dry/seasoned oak log
Answer:	The manual that comes with the saw explains how the sharpening stone works...light touch to lever with saw chain running only takes a second or two and the stone sharpens the teeth,
Question:	Eventually the chain and the sharpener will wear out and both need to be replace. What is the replacements parts number and where to get it
Answer:	You can google wholesun 3000psi electric washer manual and the 8 page manual comes up for you to print out or just use off the site. Good luck
Question:	How well does the self-sharpening system actually work
Answer:	Yes. You’ll have different nozzles that change the concentration and spread of the water depending on the spread of water. It goes by degrees. 0, 15, 25, and 40. The 0 degrees will be the most concentrated and it’s pretty much a straight line and will clean concrete with ease. Just might take you some time if you have a really big area of oil stains

Product features

Oregon CS1500 Self-Sharpening Chainsaw

Oregon's high-power, 15 amp CS1500 chainsaw is the only corded electric chainsaw on the market with a chain that can sharpen itself. The CS1500 chainsaw has all the traditional conveniences of an electric saw - instant start with the pull of a trigger, minimal maintenance, low noise and silent between cuts - and takes it one step further by incorporating the built-in PowerSharp chain sharpening system.

PowerSharp Sharpening System

With PowerSharp, you can sharpen on the saw, on the job in seconds.

18-Inch Guide Bar

Perfect to tackle almost any job in your yard.

Tool-less Chain Tensioning System

Convenient - just turn the red knob to tension the chain.

Product description

GreenWorks offer a range of systems to choose from in corded and cordless tools.  Leading in innovation, the corded Lawn system offers a variety of tools to get all your yard work done quickly and efficiently.  Whether you need something economical or with greater performance, the GreenWorks Corded Lawn Tools provide reliable options without the hassle of gas or the high cost of operation throughout the years.  Get started within seconds and leave the gas hassle behind.  Choose from trimmers, chainsaws, mowers, snow throwers, dethatchers, pressure washers and more-all GreenWorks Corded Lawn Tools are backed by a 4 Year Warranty.  For a cordless option, check out GreenWorks G-20V, G-24V and G-MAX 40V Tools.

• 14.5 Amp Electric Motor starts within seconds and delivers powerful torque to complete the job
• 18-Inch bar and chain makes clearing large fallen debris a breeze
• Tool-less chain tensioning for quick adjustments so you can get back to the task at hand
• Auto-oiler provides adequate lubrication to ensure the best cutting performance without the hassle
• Wrap around handle for multiple cutting positions to provide ease of use when trimming at different angles

User questions & answers

Question:	With how many Amps this pulls, has anyone had a problem with it blowing a breaker
Answer:	You can search “B08DCY81PS” to buy 20V 4Ah Battery
Question:	Does Green Works make a chain saw that works with the 80 volt battery
Answer:	You press the button to start it and then hold the handle underneath down. As soon as you let go, the machine stops so you have total control. It ensures complete safety.
Question:	Can you put a 12 inch bar on this saw
Answer:	Hello there, The string trimmer dimensions are: 35 .82x 4.72 x 11.02 in.
Question:	can the average size man operate one with one hand
Answer:	Yes, this string trimmer is packaged with a spool with a cutting line. Innovative automatic line feed system for instant line feeding without interruptions.

Product description

If you are looking for a high-power, low-noise electric chainsaw for trimming branches and limbs in your yard, the Oregon CS1400 corded chainsaw is the right choice. Save yourself time and hassle, since the CS1400 starts instantly and doesn’t require any gas oil mixing. Made by the world's leading saw chain manufacturer, this chainsaw features a 16 In. chain that you can tighten without tools by using the built-in tensioning ring. The automatic oiler distributes oil on the bar and chain while the saw, keeping your chainsaw lubricated and preventing premature wear. A chain brake provides added safety. The chainsaw is easy to assemble -- just put the tensioner on the guide bar and the bar and chain on the saw.

• Get to work right away with the instant start capability
• Low noise, silent between cuts
• The chain stays oiled using the built-in Lubri-Tec oiling system which reduces chain friction and increases the saw’s run time
• Tighten chain directly on the saw without additional tools
• Easy to assemble. Just put the tensioner on the guide bar and the bar and chain on the saw. Replacement chain part number: 91PXL056G

User questions & answers

Question:	Does this saw have a chain break similar to the gas saws
Answer:	It does have a chain brake, and it also is instant stop once the trigger is released.
Question:	it says in the description that the chainsaw can be returned if new and unused. if theres a problem with it can in get a refund or will i have a prob
Answer:	Probably can get a refund if it is new and unused and withing Amazon's return window. It's a good saw though so don't think you will need to return it.
Question:	Can you run a 18 inch bar and chain
Answer:	It would not be recommended to put an 18" bar and chain on this chainsaw.
Question:	where is the saw made
Answer:	The chain and maybe the bar are USA, but I have forgotten where the rest is made.

Product features

Oregon CS1400 Electric Chainsaw

The CS1400 has all the traditional conveniences of an electric chainsaw — instant start with the pull of a trigger, minimal maintenance, low noise, and silent between cuts — and is equipped with premium ControlCut 91PXL Oregon chain.

Product description

CUT BACK ON GAS! Take a pass on gas and choose the one chain saw that's a cut above the competition. Introducing a greener, cleaner way to maintain your yard and garden with the Sun Joe Tree Limb Master SWJ599E 14-INCH 9-AMP ELECTRIC CHAIN SAW. The powerful 9-amp motor makes light work of limbs, and easily slices through branches and thick brush up to 10 inches thick. Quickly cut a cord of wood, collect a load of logs, or prune a pine tree with the simple push of a button. A built-in safety switch prevents accidental starting. And at just over 7. 7 lbs, the SWJ599E is designed for maximum maneuverability around the yard or garden, without the need for gas. So, why lug a jug when you can go with a JOE? Sun Joe Model SWJ599E comes with a full two-year .

• Versatile: ideal for trimming and pruning limbs and branches
• Safety switch: protects against accidental starts
• Auto-oiler: automatic oiler with window to gauge Oil level lubricates the Bar and chain for continuous cutting

User questions & answers

Question:	Does the machine bring the chain
Answer:	Yes it comes with a chain, you have to put it on. I've used this in my yard and its awesome.
Question:	is this chainsaw fully operational
Answer:	Yes, you would just need to add bar and chain oil. Thank you
Question:	Will it trim hedges
Answer:	No. The company does not recommend cutting thin branches because they can be whipped around toward the operator. I don't recommend buying this saw for anything. Mine broke within 5 min of use. Another reviewer had the same experience.
Question:	Can I run this saw off a car battery with a 500 watt inverter? ? Will a 16 gauge, 25' extension cord be sufficient or will I need a 12, 14 gauge
Answer:	No. Amps multiplied by volts equals watts. 9amps X 120volts = 1080 watts. You have a 500 watt inverter. You'll cook your inverter and piss off the saw.

Product features

Cut Back On Gas!

A greener, cleaner way to maintain your yard and garden with the Sun Joe Tree Limb Master SWJ699E 14-inch 9-AMP electric chain saw. The powerful 9-amp motor makes light work of limbs, and easily slices through branches and thick brush up to 13.5 inches thick. A built-in safety switch prevents accidental starting. And at just over 7.7 lbs, the SWJ699E is designed for maximum maneuverability around the yard or garden, without the need for gas.

Powerful 9-Amp Motor

The SWJ599E features a powerful 9-amp motor and a 14 in. (35.6 cm) Sun Joe bar and chain.

Easy To Use

The SWJ599E starts instantly with the simple push of a button.

Easy To Maintain

The Sun Joe chain saw is powered electrically. No gas, oil, or tune-ups are necessary.

Product description

The Makita UC3551A 14" Electric Chain Saw is built heavy-duty for fast and efficient cutting with easy operation and maintenance.

• "Tool-less" blade and chain adjustments for convenient operation and easy maintenance
• Large trigger switch with soft start for smooth start-ups
• Rubberized soft grip handle provides increased comfort on the job
• Built-in current limiter helps protect motor from burnout by reducing power to motor when saw is overloaded
• Large oil reservoir with view window allows operator to check bar oil level
• Power Source Type: Corded-Electric

User questions & answers

Question:	What is the actual weight of the saw
Answer:	HEAVY FOR AN ELECTRIC
Question:	Does it come with the batteries and charger
Answer:	This is an excellent electric chainsaw, but it isn't battery operated.
Question:	Is this model being discontinued? i am also looking at the makita uc4051a if so
Answer:	Not sure if it's being discontinued, but the only difference between the 2 models is the bar length. Motor is exactly the same in both.
Question:	what chain fits this saw
Answer:	a 14" chain would be optimum, however a 12" would work as well. Oregon Chain is the most common among professional users.

Product features

Makita UC3551A 14" Electric Chain Saw

Heavy-Duty for Fast and Efficient Cutting

The Makita 14" Electric Chain Saw (model UC3551A) is engineered for fast cutting, efficient operation and easy maintenance, without the hassle of gas. The UC3551A has a chain speed of 2,900 FPM for efficient cutting and trimming. The motor has a built-in current limiter which is engineered to protect the motor from burnout by reducing power when the saw is overloaded, and an electric chain brake for maximum productivity. Additional features include an automatic chain oiler for heavy continuous cutting, and a large oil reservoir with view window that allows the operator to easily check the oil level. For increased comfort, the chain saw has ergonomic rubberized grip handles, and a large trigger switch with soft start for smooth start-ups.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase. Should any trouble develop during the one-year period, return the complete tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories.

This warranty does not apply where:

- Repairs have been made or attempted by others.

- Repairs are required because of normal wear and tear.

- The tool has been abused, misused or improperly maintained.

- Alterations have been made to the tool.

In no event shall Makita be liable for (A) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (B) any amount in excess of the amount actually paid to Makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'Merchantability' and 'Fitness for a specific purpose,' after the one-year term of this warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Greenworks 40V lithium-ion platform powers over 40 outdoor products, including lawn mowers, blowers, string trimmers, chainsaws, hedge trimmers, and much more! The 40V lithium-ion battery provides the power you need, and delievers fade-free power with no memory loss after charging. The outdoor power equipment allows you to tackle up to 1/2 acre with the available 2Ah, 2.5Ah, 3Ah, 4Ah, 5Ah, and 6Ah batteries. USB ports are integrated into the BAF701, BAF702, L-300, BAF704, BAF705, L-600 batteries, making it a portable charger for phones, tablets, and other compatible electronic accessories. The Greenworks 40V platform comes with a 3 year tool / battery warranty to protect your investment

• Power source type: Battery Powered

User questions & answers

Question:	does this "new style" leak oil like the old one? Hope they fixed that
Answer:	Hey Amazon customer, Yes, The 320iB battery leaf blower uses the same battery as the battery Husqvarna chainsaws. Thanks for considering Husqvarna for your outdoor power equipment needs!
Question:	Will the new style battery work in all older green works lawn tools
Answer:	Last I saw Lowes was 199 without a battery and 239 with, plus they're "unavailable".
Question:	Can the 16'' cordless be purchased without battery and charger, I already have two batteries and chargers for other items
Answer:	Hi Tim. It’s very difficult to state a specific run-time for our battery-powered products since the power is variable based on how much the trigger is pulled, as well as what you're blowing. If you’re running continuously at full power, obviously battery power will be depleted faster than running the tool at a lower power, or running power levels sporadically. Regardless, you’ll have plenty of run-time to complete your typical outdoor tasks. I assure you that run time is very comparable to run-time of a gas-powered blowers. Battery recharges in about an hour. I do recommend having a spare battery on hand if you plan to use the equipment for lots of tasks in a single day. Our batteries are interchangeable with all our battery-powered products, so you van get eve more versatility if you also have a trimmer or pole saw or something else from our family of battery-powered products. Thank you so much for considering Husqvarna for your outdoor power equipment needs.
Question:	what is the differance between this and the old style
Answer:	Yes they are interchangable with all Husqvarna handheld equipment. Nice unit, I have one myself.

Product features

Greenworks 40V 16 Brushless Chainsaw

Perfect for yards up to 1/2 acre, Greenworks 40V tools are lightweight, start instantly, and require virtually no maintenance – no gas, no oil, no mess – but still deliver gas-like power.

• Wrap around auxiliary handle reduces vibration & increases control
• Mechanical chain brake provides increased safety during operation and when idley

Product description

The Black & Decker CS1518 15amp 18 Corded Chainsaw offers a 15 Amp powerful motor for large branches and demanding cuts. This chain saw has an 18 Oregon low-kickback bar and chain for improved cutting performance. It offers tool-free chain tensioning for quick and easy chain adjustments, along with an automatic oiling system which ensures constant bar and chain lubrication. It has a clear window so you can monitor the oil levels and also has a chain break feature for optimal safety during usage. This is backed by Black & Decker's 2 year limited warranty. Included Components: Scabbard; Power Source: Corded

• Powerful 15 Amp motor
• 18" Oregon low-kickback bar and chain
• Tool-free chain tensioning
• Automatic oiling system
• Chain break feature for safety during use

User questions & answers

Question:	Will it cut hardwood like oak or mesquite
Answer:	Isn't this the one onAmazon?
Question:	What size file should i use to sharpen the chain
Answer:	Yes, a charger is included.
Question:	how long is the cord
Answer:	LITHIUM
Question:	I can't get the chain on, it seems to short, have followed directions but still won't reach, anybody know what I am doing wrong
Answer:	Hi, please check the blade if it is properly and securely connected at the bottom of the unit. For other concerns and inquiries kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST. Thank you.

Product features

18 Inch Corded 15 Ah Chainsaw

The BLACK+DECKER CS1518 18 Inch Corded 15 Ah Chainsaw provides the strength needed to power through wood-cutting. The 15 Ah powerful motor creates demanding cuts. The 18 inch Oregon low-kickback bar and chain allow for improved cutting performance. The clear window allows for oil visibility while the automatic oiling system ensures constant bar and chain lubrication. Includes chain break for optimal safety during usage.

- Clear window for oil visibility

- Chain break for optimal safety during usage

- Tool-free chain tensioning for quick and easy chain adjustments

- 15 Ah powerful motor for demanding cuts

- 18 inch Oregon low-kickback bar and chain for improved cutting performance

About BLACK+DECKER

Since 1910, BLACK+DECKER has been setting the standard for innovation and design of power tools, outdoor yard care equipment, and home products. The inventor of one of the first portable electric drills with pistol grip and trigger switch, BLACK+DECKER has evolved from a small machine shop in Baltimore, Maryland to a global manufacturing powerhouse with a broad line of quality products used in and around the home. When home owners have work to get done, they trust that BLACK+DECKER’s products will do the job efficiently and reliably.

• ❤【TIPS 】The residual oil on the product is the residue from the test at the factory. It is a normal phenomenon and will not affect the use of the product; Equipped with 190ml oil storage tank (Lubrica
• ❤【TIPS 】This product is equipped with high-quality Oregon chain (model : 91PX063X), You can buy accessories on Amazon; When using the machine for the first time, please add an appropriate amount of industrial lubricants to make the machine idle for 20-30 seconds. This way can lubricate the chain and gear, thus protecting the machine
• POWERFUL ENGINE - 15Amp high-power pure copper motor, the running speed of the chain is up to 13m / s, high torque, high cutting efficiency; ideal for pruning and wood cutting (Note: The residual oil on the product is the residue from the test at the factory. It is a normal phenomenon and will not affect the use of the product. )
• 18-INCH OREGON CHAIN - The practical 18-inch OREGON low recoil chain is suitable for most felling needs, providing you with an excellent cutting experience; professional quality, easy to install and replace the chain without tools. This product is equipped with high-quality Oregon chain (model : 91PX063X), You can buy accessories on Amazon
• SIMPLE OPERATION - The tool-free chain can be adjusted quickly and easily to prevent over-tightening and ensure that you always have the proper tension for the work at hand; the visible transparent oil tank clearly shows the amount of oil and provides great convenience; Equipped with 190ml oil storage tank (Lubricating oil is not provided in the product box.)
• SAFETY SYSTEM - Two safety switches and manual mechanical brakes ensure the safe start of the machine and protect your safety. Before starting the chainsaw, make sure that the mechanical brake has been released, otherwise it will not start
• AUTOMATIC OILING - The automatic lubrication system has perfect functions and is easy to lubricate the chain. When using the machine for the first time, please add an appropriate amount of chain saw lubricants to make the machine idle for 20-30 seconds. This way can lubricate the chain and gear, thus protecting the machine

User questions & answers

Question:	Does it come assembked
Answer:	The saw is 15amp. You'll need 12ga cord
Question:	Can the chain of the electric chain saw be replaced
Answer:	Dear customer: Regarding lubricants, there is not different with regular chainsaw oil for this corded electric chainsaw. It is recommended that you use Chainsaw Bar and Chain Oil, which is easily available on Amazon. Thank you very much for your question!
Question:	What gauge extension cord is needed
Answer:	No, it does not need to be oiled. If you want to only just put a drop or 2 on the blade then point into the air to get excess off so you don't spray oil on you or others.
Question:	The description talks about using industrial oil for 20-30 seconds while idle, is thi different than regular chainsaw oil for the chain
Answer:	The electrical plugin device is the charger. The cable on the electrical plugin plugs directly into the battery.

Product features

TACKLIFE GCS15A 18-Inch Corded Chainsaw

• The TACKLIFE 18-Inch Electric Chainsaw provides over 15 amps of sawing power, making easy work out of any tree, bush or branch that gets between you and that perfect lawn.
• The 18-inch Oregon chain (91PX063X) runs at speeds of up to 43 feet per second while the lightweight design limits fatigue during operation. Simply plug the cord into the power source of your choice and start chopping with 2.2Nm of torque.
• The auto-oiling system lubricates the guide bar and chain as you cut to elongate the life of both the blade and the saw itself.
• With tool-free chain changes and emission-free operation, the TACKLIFE 18-Inch Electric Chainsaw is the perfect addition for any yard.

NOTICE

• TIP1. The residual oil on the product is the residue from the test at the factory. It is a normal phenomenon and will not affect the use of the product.
• TIP2. This product is equipped with high-quality Oregon chain (model : 91PX063X), You can buy accessories on Amazon.
• TIP3. This product box is not equipped with Lubricating oil.

• TIP4. Before starting the chainsaw, make sure that the mechanical brake has been released, otherwise it will not start.
• TIP5. When using the machine for the first time, please add an appropriate amount of industrial lubricants to make the machine idle for 20-30 seconds. This way can protect the machine.

Tool-less Chain Tensioning System

Fast & easy adjustment with the tool-free chain. The automatic tool-free chain tension system ensures you’ll always have the correct tension for the job at hand

Automatic Oiling System

Oiling system provides easy lubrication of bars + chain. The automatic chain lubrication system not only makes for smoother, more efficient cuts, it extends the life of the bars and chain

Triple Safety Switch

The built-in overload protector greatly protects the motor safety, and three safety switches ensure the safe start of the machine (1.Overload protector 2.Security lock 3.Start switch)

Metal Gear

High-quality metal gears, better transmission saw chain, wear resistance

Visual Transparent Fuel Tank

Built-in oil reservoir with window level indicator, clearly shows the state of oil in the oil tank + oil tank capacity. And the oil level indicator lets you know exactly where you stand

Brake Switch

Built-in brake function, push forward to stop, safer to use. Braking time is within 0.12s. At the same time prevent wood chips from splashing when cutting wood, protecting safety

Product description

The Makita UC4051A 16" Electric Chain Saw is built heavy-duty for fast and efficient cutting with easy operation and maintenance.

• "Tool-less" blade and chain adjustments for convenient operation and easy maintenance
• Rubberized grip handles are ergonomically designed for comfort
• Large trigger switch with soft start for smooth start-ups
• Built-in current limiter helps protect motor from burnout by reducing power to motor when saw is overloaded
• Large oil reservoir with view window allows operator to check bar oil level
• power source type: Corded-electric

User questions & answers

Question:	What is the amp rating for the 14" and 16" and are the bars interchangeable
Answer:	I wanted to do the same, but the "Find a Part" function on Oregon's website indicates the Makita UC4051A uses Oregon A041 tail mount bars. The longest A041 bars Oregon have at present are 18" long, e.g., the P/N 540394 low-kickback bar and chain combination.
Question:	What gage wire to use for 50 and 100 ft extension cord
Answer:	1 metal, 1 nylon. Just replaced the nylon, lasted 4-5 yrs "hard" service. Took about an hour to replace, cost was about $4.50.
Question:	I heard that the Oregon bars are interchangeable. It may not be recommended... But is it possible to increase the bar length to 20" or even
Answer:	The model number 20262 will come with a smaller reservoir than most standard 12" chain saws. Be sure to always check the oil before and after each usage.
Question:	Does this chain saw has a metal gear drive
Answer:	Hello, Yes, the bar/chain can be removed from this tool.

Product features

Makita UC4051A 16" Electric Chain Saw

Heavy-Duty for Fast and Efficient Cutting

The Makita 16" Electric Chain Saw (model UC4051A) is engineered for fast cutting, efficient operation and easy maintenance, without the hassle of gas. The UC4051A has a chain speed of 2,900 FPM for efficient cutting and trimming. The motor has a built-in current limiter which is engineered to protect the motor from burnout by reducing power when the saw is overloaded, and an electric chain brake for maximum productivity. Additional features include an automatic chain oiler for heavy continuous cutting, and a large oil reservoir with view window that allows the operator to easily check the oil level. For increased comfort, the chain saw has ergonomic rubberized grip handles, and a large trigger switch with soft start for smooth start-ups.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase. Should any trouble develop during the one-year period, return the complete tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories.

This warranty does not apply where:

- Repairs have been made or attempted by others.

- Repairs are required because of normal wear and tear.

- The tool has been abused, misused or improperly maintained.

- Alterations have been made to the tool.

In no event shall Makita be liable for (A) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (B) any amount in excess of the amount actually paid to Makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'Merchantability' and 'Fitness for a specific purpose,' after the one-year term of this warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.