12 best submersible lake pumps

Product description

Description of 12V Bazpo Submersible Water Pump

Voltage: 12 volt DC

Current: max. 2,2 A

Throughput: max. 10 l/min (2,5 GPM)

Delivery height: max. 5,5 m.(18.04 feet)

Pressure: max. 0,55 bar / 8 psi

Power: 15 - 24 Watt

Diam. / Height: 38 / 104 mm.

Wire length: 1 meter.(3.28 feet)

Connection: (+) brown, (-) blue

Made in Germany

For all types of clean water (drinking, well, rain, spring, etc)

Operating instructions, read before use!:

BAZPO pumps require a 12 volt direct current power source, which can be provided by either: - Automobile battery - Dry-cell batteries - 2*6 volt - Constant current transformer - Maximum non-smoothed current 14volt. The permitted running cycle is 15 minutes running time, 15 minutes cooling time.

The pump electrical connections are follows: 2 core flat cable: +Black/White - White 2 core round cable: +Brown -Blue The water pump can be controlled by a switched tap, foot switch, diaphragm pressure switch, etc.

BAZPO pumps are designed for water use only, at maximum temperature of 75°C. Hermetically sealed for maintenance free operation. Manufactured from non-toxic, odour and taste free material. Hard impacts or blows will damage the pump.

Keep the water pump from freezing. For winter period remove from water tanks and disconnect. Carefully drain all water from the pump.

ADD to CART RIGHT NOW and GET it in 2 DAYS with a PRIME Membership!

• 💧 TOP PERFORMANCE - Bazpo Splash 12 volt DC drinking water pump - The only product on a market with Non-Return Valve and Filter, which gives additional protection and extends life cycles for motor. Water delivery height up to 5,5 m. (18 ft.) and produces 10 l/m. (2GPM - 2.5GPM), also powered with a power cable of 1 m. (3.2 ft.) All components are made and tested in Germany.
• 💧 COMPACT TRANSFER PUMP - Easily connects to a portable battery or solar panel to pump water into a 5-gallon jug. It’s able to take water from a lake or pond to a jerry can so to disinfect it for drinking. Has a really miniature size - 152.5 mm. (6 in.) long and 38.85 mm. (1.52 in.) in diameter to make your life easier with any engineering idea.
• 💧 RV / OUTDOOR - Simply connect to kitchen faucet using 10 mm. (3/8") hose and start your camping journey. Loving to go far away from where is no electricity? Just connect Solar Panel kit, Car battery or 12 Volt transformer to start transferring water, thanks to low voltage usage 15 - 24 W. Connect pump to sprayer to water garden flowers or make an outdoor shower wherever you parked your caravan or motorhome.
• 💧 OTHER INDUSTRIES - Being on a market for a long time, we’ve satisfied customers almost in every field: cattle watering farm systems, hydroponic systems irrigation, aquarium, and fish tanks water changes, rain barrels, shallow wells, sailboats, and yachts to pump out the water from the keel, fountains projects. But mostly we proud of helping people with manual and foot water delivery to automate the process in faraway villages.
• 💧 SUPERB QUALITY GUARANTEED - We have used our knowledge and passion to finally create our BazPo 12v water pump. Quality is priority for all our products we create, so test it and feel German-made quality and innovative technologies. If it turns out you are not satisfied, we will immediately refund you. Our customer service works 24/7 to answer your questions and help with replacement and maintenance process. Order Yours Right NOW!

User questions & answers

Question:	Is this a food grade pump
Answer:	Yes, we use a food-grade certified plastic. Feel free to pump clear, drinking water. DIN EN ISO 9001 and DIN EN ISO 14001
Question:	if I hook it to a sink facet will it start and stop when I turn the facet on and off
Answer:	Hi, Yes Bazpo Submersible Water Pump will turn on and off automatically if you will connect it to the 12V water faucet with a micro switch. Microswitch makes it possible to automatically turn on and off the pump. Let us know if you have any additional questions, Have a safety day! Regards
Question:	What size is the outlet
Answer:	Hi, The pump outlet is 10mm. Regards
Question:	what size amp fuse do i use will a 3amp be good
Answer:	Hi, Yes, 2,5 - 3,0 amp fuse will be perfect for this 12V submersible water pump. Thanks

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91570, 1/2 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 3300 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 3/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/2 HP Utility pump moves up to 3,300 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/2 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter; Amps:4.9
• Removable suction screen and handles up to 3/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	Length of hose for a sump pump is not nearly as important as lift. you can have a long horizontal run with only minor flow loss. Friction loss (the loss from hose length) at these low pressures is very small. The elevation (aka lift) is the true limiting factor. (PSI means pounds per square inch, FYI, the water pressure coming into your house from the main is about 50-80psi, someone wondered what psi meant). Based on the chart, this pump moves about 30 gallons per minute (gpm). If you lift ten feet the flow drops to about 20 gpm; at 20 feet of lift it's flowing about 10 gpm. I have used this with vinegar to flush my tankless water heater and I used it with about 50/50 mix of simple green and water in a 5 gallon bucket as a parts washer for motorcycle parts and the pump is fine. I do flush it with clean water when I am done.
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91570 1/2 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91570, 1/2 HP thermoplastic submersible utility pump will move water up to 3300 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 3/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/2 in. NPT discharge.
• 3/4 in. Garden hose adapter.
• Stainless steel impeller.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/2 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 3300 Gallons per hour at 0'
• 2520 Gallons per hour at 10'
• 1500 Gallons per hour at 20'

Product description

lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough dewatering applications and heavy usage operations. Further, the ST2040T incorporates a carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 25’ Power Cable with strain relief.

• 2" Suction & Discharge
• 1 Horsepower. Pump diameter:10.3 inch, overall height: 16.8 inch
• 115 VOLT
• 79 Gallons per minute (GPM)
• 40' Maximum Head

User questions & answers

Question:	Does this have an automatic on/off float
Answer:
Question:	While this pump has a running amp of 6.8 amp, it’s staring amp is 25 amp per its manual. Do you have this pump on a 20 amp or 30 amp dedicated line
Answer:
Question:	can it handle muck and how large is inflow/outflow
Answer:
Question:	Does this have a warranty
Answer:

Product description

1HP, 230V/60HZ/1PH, 7 stage, 30 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4 NPT discharge. Warning: This is 220V pump! Specifications: 4" deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4 NPT discharge Industrial grade heavy duty, also good for home usage Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9A, or MA0459X-14A; Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps. Water temperature: (32 113of) Trans mediums Ph.: 6.5 8.5 Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance. High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start. Built in control box. This pump DOES NOT require an external control box! This pump uses high quality UL approved motor, UL file No.: E233961 This is a 2 wire pump (2 wires + ground wire) 10' long electric cord included. Heavy-duty thermoplastic impellers, diffusers, and intake screen. Built in check valve included. Submersible design creates quiet operation Unique design reduces its noise. 207 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' for the pressure tank applications. User's manual included and installation tape kit included. Warranty: 12 months limited manufacturer's warranty

• American company
• Pump, Deep Well Submersible Pump, 1HP, 220V 60HZ, 30 Gpm, Stainless Steel, for 4" or bigger well, long life
• 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
• Submersible Pump

User questions & answers

Question:	Well is 300 feet deep will this pump and electrical cord work
Answer:	I used this pump for less than 75 ft well. Pumps good with great pressure.
Question:	Will this pump work in a 4" ID well casing
Answer:	It should. But if you have rust or dirt built up in the casing, the casing size maybe less than 4" which may cause problems for the pump.
Question:	Does the hallmark ma0414x-7a deep well pump come with electrical cable
Answer:	The cable is about 6 feet long that comes attached to the pump. You can get the electrical splices and the wire you need to complete the installation from Home Depot.
Question:	How long is the electrical cable that comes with the pump
Answer:	The electrical cable that is integral to the pump is a few feet long and can be spliced to the electrical line going back to the power box. I believe it was ~6ft. long. In the spirit of too much information: The splice technique I used was to get a submersible splice kit (available on Amazon or Lowe's). It comes with the splices and a special heat shrink tube that has a rubberized coating that oozes out when it is shrunk over the splices. I also covered the splice with 3M type 33 black tape as an added insurance policy. This tape is putty-like and bonds to itself when wrapped. I also used the 3M tape to cover all of the barbed fitting/hose clamp plumbing joints and the cast housing of the pump. The pump has been in for several months and works like a champ. You will not be disappointed with the quality and performance of this pump.

Product features

Hallmark Industries MA0414X-7A Deep Well Submersible Pump, 1 hp, 230V, 60 HZ, 30

This is 220V (230V) pump. Does not work for 110V (115V).

• SOLID CONSTRUCTION: The shaft and drive ring piece are made from silicon carbide material, reduce the attrition and increase the service life.IPX-8degree
• ENERGY SAVING WITH LOW NOISE: Ultra-quiet operation design(30-40db).Less power (500W)consumption with high output(8190GPH/31000LPH) which compared to other pumps
• HIGH LIFT WITH DETACHABLE FILTER: Lift height can be up to 29.5FT/9M.This pump can more than accommodate your water features with portable handle and detachable filter
• EASY INSTALLATION: Adjustable outlet direction and 20.3FT power cord, to meet different requirements.Flexible Tube Size: 2” or 2 1/2” ID. It can be worked with filters (filter system) together
• MULTIPLE USAGE: VIVOSUN Fixed Flow Rate pump can be used as submersible or inline.It’s great for a variety of application in pond, fish tank, fountains, waterfalls, hydroponic systems, irrigation systems. We provide a 1-year warranty for this water pump. If you are not completely satisfied with our water pump or receive a defective product, we are happy to find an acceptable solution. Please do not hesitate to contact us with any questions or concerns

User questions & answers

Question:	What is the warranty for this pump
Answer:	don't know
Question:	Can someone tell me what waterfall model you use with this pump
Answer:	I have a small lake on my property so I made a fountain out of some flexible hose, styrofoam, a piece of PVC pipe, and a cap I drilled some holes in to create a fountain to give the fish a little more oxygen. That is what I use mine for. I can't help you with the waterfall model that would correspond with this pump. Sorry!
Question:	Will this replace a 3100 GPH pump
Answer:	Yes, I think it will, it really pumps!
Question:	can you attach directly to garden hose
Answer:	No it needs a different attachment but it was easy to get at the hardware store

Product features

VIVOSUN 8190 GPH Submersible Water Pump 500W

VIVOSUN's 500W Submersible Water Pump is made of a heavy-duty silicon carbide material which is ultra-durable. It uses less power (500 W) but also provides a high output (8190GPH/31000LPH) with super-low noise (30-40 db).

Product description

Our pressurized water booster pump is perfect for transferring water from wells or water reservoirs up moderate slopes and to upper stories of buildings. This water pressure booster pump gives homes up to 5 times more pressure in their water pipes for better showers, cleaning and irrigation. 1.6 horsepower motor pumps 1000 gallons per hour and has a max lift of 150 feet. This pump is perfect for draining, adding water pressure to houses and farm irrigation.

Features:

• The shallow well jet pump is designed to supply fresh well water to residential homes, farms, cabins as well as agricultural structures and many others
• Jet water pump can be pumped water from a shallow or medium slope to a high place and is suitable for constructing a lawn sprinkler system
• Built-in thermal overload protection, so that the pump automatically stops when the card machine is overloaded to prevent burning
• Automatic booster system and high-precision pressure gauge allow you to clearly see the pressure value and easily control the water pressure
• Shallow well jet pump is suitable for high floor domestic water, faucet and shower pressurization, groundwater and well water extraction, farmland irrigation and water supply, and water tower pressurization
• Equipped with an automatic booster system and pressure gauge for easier and safer operation
• Designed and manufactured in line with the valid CE safety requirements

Specifications:

• Watt: 1200
• Horsepower: 1.6
• Max Flow Rate: 16.71GPM / 1000GPH
• Max Lift: 150 Feet
• Max Pressure: 72.5 PSI
• Hose Fitting: 1"
• Container Size: 5 Gallon
• Overall Dimension: 12"(W) x 18"(L) x 19"(H)

Package Contents:

• Water Pressurized Garden Pump
• Manual

*Note Pump not for drinking water, internal drinking water filter is required*

• The shallow well jet pump is designed to supply fresh well water to residential homes, farms, cabins as well as agricultural structures and many others
• Jet water pump can be pumped water from a shallow or medium slope to a high place and is suitable for constructing a lawn sprinkler system
• Built-in thermal overload protection, so that the pump automatically stops when the card machine is overloaded to prevent burning
• The automatic booster system and high-precision pressure gauge allow you to clearly see the pressure value and easily control the water pressure
• Shallow well jet pump is suitable for high floor domestic water, faucet and shower pressurization, groundwater and well water extraction, farmland irrigation and water supply, and water tower pressurization

User questions & answers

Question:	Will it be okay to reduce the output to 3/4 to fit a garden hose
Answer:	Yes You. Can I draw. Water from. The lake to water my. Lawn. With garden hose
Question:	Can you adjust the pressure on this pump
Answer:	Not sure, never tried. I almost think no.
Question:	can this pump be run off a small generator
Answer:	Yes. Make sure he set has enuff wattage.
Question:	will this pump work in my house i have a 2 inch sand point for my house
Answer:	Yes it should I am pumping water about150 feet with no problem

Product description

Ideal for use in skimmer filters and pondless waterfall applications, the Aquascape 30391 Tsurumi 12PN submersible pond pump is a good match for filters that require a vertical style pump housing, and the 12PN provides high flow water performance on lower head applications. The 12PN will pump up to 10,000 gallons per hour (GPH), and its 3-inch threaded discharge allows for simple installation. Its energy efficient, continuous-duty motor operates at lower temperatures, extending the life of the pump significantly. A semi-vortex impeller design enables the pump to handle solids efficiently and effectively, resulting in less maintenance and trouble-free performance. The Aquascape 12PN pump also contains a built-in thermal overload, protecting the pump from damage if it's run in low-water conditions. The 12PN measures 11.625 x 7.75 x 15 inches (LxWxH), has a 20-foot power cord, and is backed by a 2-year limited warranty. Aquascape is passionate about the products we produce, providing unique products, designs, and features that stand above the competition.

• Ideal for use in skimmer filters and pondless waterfall applications; pumps up to 10,000 gallons per hour (GPH)
• Great for filters that require a vertical style pump housing; provides high flow water performance on lower head applications
• Constructed of stainless steel and composite resin for strength and corrosion resistance. Watts: 1032
• Semi-vortex impeller design enables the pump to handle solids efficiently and effectively
• Measures 11.625 x 7.75 x 15 inches (LxWxH); 20-foot power cord; 2-year limited warranty

User questions & answers

Question:	Does this come with a 2 year warranity
Answer:	When I got delivered the black box was inside the amazon box with plastic bubbles around it .
Question:	How much horse power for Tsurumi 12N
Answer:	No the magnetic pointer can not be removed.
Question:	I'm replacing an existing pump with 2" outlet. Does using a 3 inch to 2 inch adaptor harm the pump
Answer:	Short Answer: by creating a magnetic field, the bio-magnetic field of the body is influenced to work to heal illnesses and repair injuries. Not-so-short Answer: a session where soft magnets join the suction of cupping are used to help discharge disruptive energy. Magnetic Cupping has such an amazing way of aiding your body to your parasympathetic nervous system. Being in a Sympathetic (fight-or-flight) response takes a toll on your immune system and therefore overall health. The full Cupping Blanket is only one of many ways to change the body’s nervous system.
Question:	is this pump a 115v? Also does it have he auto shut off float
Answer:	rope diameter is 1" worked perfect in my heatmor 400

Product features

Tsurumi Water Feature Line

Corrosion Resistant.

Product description

Specification:



Color: Black

Voltage: DC12 V

Power: 3.6w

Water Height: 0-25cm 0-0.8 ft

Max Lift Height : 300cm/9.8ft

Maximum flow rate: 63 GPH(240 L/H)

Inlet: OD 8.5mm /0.335 in

Outlet: OD 8.3mm/0.33 in

Bracket screw: Aperture 3mm /0.12 in

Power cord: 1.6m /5.25 ft

DC head specifications: 6mm /0.23 in

Gross Weight: 99 / 220g (2 pcs)

Product Size: 5.5 * 5 * 4cm /2.1 in * 1.9 in * 1.6 in

Packing size: 9.5 * 7.5 * 7.5cm (2 pcs) /3.7 in * 2.9 in * 2.9 in



Installation:



1. Before installation, make sure that the input voltage (DC 12V), power, etc are suitable for use.Pls do not use if it does not compatible.

2.Put the pump in appropriate place after cleaning it. Install a water pipe or a fitted device then plug in the power supply.



Package includes:



2 * DC Water Pump



Note:



1.Cut off the power, disassemble it and cleaning the pump when it is insufficient or not transferred.

2.Do not let the pump leave the water for more than 5 minutes when working.

3.The pump can only be used in fresh water, can not be used in corrosive liquids.

4.Do not pick up the submersible pump with power cord, or the power cord may be pulled off.

5.When the pump work, it should be completely immersed in water to ensure that the pump has a certain degree of cooling.

6.This pump don't has the self-absorption function, it need to place in the water when using.

7. The water pump is detachable. Please use it in clean water and clean the pump regularly to avoid clogging.

• Voltage: DC 12V. No adapter. If the voltage does not match, it will cause the pump to not work or burn out.
• Max Lift Height : 9.8ft ,when connected with water pipe. Use it in clean water to avoid clogging. For using it better, pls dismantl and clean submersible pump regularly.
• Mini but powerful, maximum flow rate: 63 GPH(240 L/H). Come with 5.25ft power cord.
• Very Easy to install. Great used for rockery, bonsai fountains, fish tank pumping.
• Tips: Submersible pump don't has self-priming function, must be completely immersed in water and make sure that the pump works in fresh water, not in corrosive liquid. Avoid long-term dry burning of the product. The water pump is detachable, you can clean it if any need.

User questions & answers

Question:	how hot do these pump motors get if not submerged in water
Answer:	How do you get water to the pump if it's not submerged?
Question:	Can the pump be directly connected to a solar panel? (Does it have an mc3 connector
Answer:	Thank you for your question. We don't suggest to connect the water pump to solar panel. And this water pump don't come with MC3 connector.
Question:	What is the PSI of these pumps
Answer:	Don't know what PSI they are. More of a volume pump.
Question:	Can the pump be wired direct to a 12v battery, or does it have to get 12v from a 12v transformer/adapter
Answer:	Yes, The pump can connect with 12V battery directly.

Product description

The Wayne CDU980E submersible sump pump can move up to 5490 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits. Intended for indoor use only.

From the Manufacturer

The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.Intended for indoor use only.

• Assembled in the US with foreign and domestic parts
• Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit.Assembled in us, with foreign and domestic components
• Stainless steel motor housing and rugged, cast iron pump base
• Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. of discharge lift
• 1-1/2 In. NPT Discharge for compliance with building codes

User questions & answers

Question:	Can this pump be hooked up to a battery backup
Answer:	It pulls too much current for most battery backups, a generator will run it fine.
Question:	how long is the power cord
Answer:	Just received my Wayne CDU980E. I, too, was concerned with this question. Power cord measures about 90-inches (7.5-feet) from where it connects to the top of the sump motor (which is about 11-inches above the bottom of the pump). I can't find this marked on Wayne's literature for the CDU980E.
Question:	When the pump is switched on by the floater, how long does it run
Answer:	If there is merely water in the sump pit, you don't need this powerful a pump. This 3/4 HP pump is for handling major water flowing into the pit. When that happens in our cellar, the pump runs until it out-runs the flow of incoming water.-- sometimes for minutes sometimes for hours. We have 4 sump installations in 4 buildings. When the water table (level of the ground water in the outside ground) is high, three of these systems pump a lot of the time and pretty constantly. We have 2 pumps in each pit so if one fails we do not get flooded. Each Pump (if more than one in the system) needs to have a check valve/ back-flow preventer so it will force the other pumps to actually pump the water up and out and not allow an operating pump to to just pump back out through the other , (not then pumping) pump. The should also be placed at different levels so they don't necessariy go on at the same time, thus reserving one as a kind of back up. Of course, if there is really a lot of incoming water -- which we had when we first bought our house, it takes both pumps to handle the in flow and avoid flooding. NOw that we use the large diameter PVC piping, it works so much better that a single pump pof this size would probably be fine. It is best to pipe the pumps with real PVC pipe and in 1 1/2" or 2" size. This will increase the flow rate by around twice as much flow as the skinny (1 1/4") highresistance black curly-sided plastic pipe they often come with. Good luck and stay dry.
Question:	when you say 'top suction' does this mean the pu,p must be totally submerged
Answer:	The pump draws water from the "LOWER" part of the pump a few inches off the floor. It does not have to be completely submerged to draw water. When the bulb float rises enough to turn on the float switch it sucks water. It turns on before the water reaches the top of the pump. I use this one and I know. Hope this helps someone.

Product description

Parameters

▪ Materia l: Stainless steel

▪ Drive mode : electric

▪ Pump Shaft Position : side vertical

▪ Impeller Structure : closed impeller

▪ Impeller Suction Method : single suction

▪ Flow : 100 (m3/h)

▪ Number of Impellers : 1

▪ Head : 8(m)

▪ NPSH : 1(m)

▪ Outlet Diameter : 25 (mm)

▪ Structural Principle : Jet pump

▪ Voltage: DC 12(V)



Features

▪ Stainless Steel Body : Beautiful, strong, durable, not easily damaged;

▪ Portable Handle : Easy to handle, easy to use;

▪ Bottom Triangular Support Point : Durable wear and stable placement;

▪ Quiet, low noise;

▪ Pagoda design for easy connection of pipes, high flow, high lift;



Package Includes

▪ 1 x Submersible Pump

▪ 2 x Metal Buckles

▪ 2 x Positive and Negative clips

▪ 2 x Plastic Parts

▪ 1 x User Manual



Note

▪ Please feel free to contact us if you have any question about the product. We would try our best to solve any problem for you;

▪ If not 100% completely satisfied with our item, simply contact us to request a refund or exchange. 3 month money back/replacement guarantee, 24 months product defect free replacement warranty.

• The electric pump is mainly composed of motor and pump. The electric motor is mainly composed of a fixed rotor, a bearing and a machine base. The water pump is mainly consisted of an impeller, a pump body, a connection, a bearing, and a single-end mechanical seal；
• Parameters: voltage -12V DC, pump shaft position - side vertical, impeller structure - closed impeller, impeller suction mode - single suction type, impeller number -1, discharge port diameter -25 (mm), flow rate -100 (m3 / h ), head -8 (m), NPSH -1 (m);
• The main parts of the pump motor are powered by stainless steel DC motor, equipped with perfect electrical protection device and special waterproof seal, and made of high-quality engineering plastics and stainless steel to achieve the purpose of low power consumption, large flow and corrosion protection;
• It is suitable for drainage of all kinds of ships, aquaculture, grassland animal husbandry, industry and mining enterprises with corresponding voltage, and is a portable and ideal water lifting tool;
• Note : Please feel free to contact us if you have any question about the product. We would try our best to solve any problem for you. Wish you have a good shopping experience.

User questions & answers

Question:	What are the pump dimensions
Answer:	About the same as average sump pump
Question:	How long is the electrical wire
Answer:	Mine measured 80" from the top of the handel. So almost that much can be submersed. I extended the cord to reach power source
Question:	If I connect this to my yard sprinklers is there enough pressure to water the lawn
Answer:	In theory, it is possible. All depends on your specific situation.
Question:	Up to how many feet high this pump can lift water
Answer:	Says eight meters ! I had it pumping out of the river up on the bank (approximately 4 feet up) and it pumped like a very very slow garden hose !

• Rubber sole
• Recommended 1: CONVENIENCE - Smooth neck design prevents chafing when wearing our water shoes. It is convenient to wear and take off.
• Recommended 2: COMFORTABLE FIT -- Breathable and smooth fabrics with fine stretch on uppers. Like socks, flexible and comfortable.
• Recommended 3: RUBBER OUTSOLE & FOOT SAFETY -- Wearable and top-quality rubber sole, which protects your feet from being hurt by sharp objects.
• Recommended 4: OCCASION - Yoga Training, beach, swimming, pool, weight training, wake-boarding, sailing, boating, kayaking, windsurfing, cycling, jogging, walking, fishing, beach volleyball, gardening, lawn, car-washing and driving. Family outings!
• Tips：VARIOUS SIZE AVAILABLE -- fit different feet,little kids, big kids,men,women are available.

User questions & answers

Question:	Where are these made
Answer:	China
Question:	I'm a size 7 in US womens should i get the 5.5-6.5 or 7.5-8.5? thanks
Answer:	Sizes are not always the same from brand to brand but inches are always inches. Measure your foot in inches and see if one is close. Mine fit snug which is good. US Toddler 13M= Insole Length 6.85in = EU 28-29 US Little Kid 1-1.5M= Insole Length 7.21in = EU 30-31 US Little Kid 2-3M= Insole Length 7.63in = EU 32-33 US Women:3.5-4 = Insole Length 8.03in = EU 34-35 US Women:5.5-6.5/Men:5-5.5M = Insole Length 8.46in = EU 36-37 US Women:7.5-8.5/Men:6-7 = Insole Length 9.17in = EU 38-39 US Women:9.5-10.5/Men:7.5-8.5 = Insole Length 9.69in = EU 40-41 US Women:11-12/Men:9.5-10.5 = Insole Length 10.20in = EU 42-43 US Women:12.5-13/Men:11-11.5 = Insole Length 10.71in = EU 44-45
Question:	what is the best way to measure your insole? I wear a size 8 (38) in women’s and I am trying to figure out what size to get
Answer:	I ordered a 7.5 in US sizing and they fit perfectly. They stretch so if you order the size 8 they should fit. Depending on your type of feet you may want to order the 8.5.
Question:	Im going on a 7 day cruise will these hold up that long going between the beach/pool and other activities
Answer:	I love mine. They seem to be holding up very well no rips etc. I wear them in a pool with a lot of choline and that’s hard on anything. So far so good. Enjoy your trip.

Product features

VIFUUR Outdoor Water Sports Shoes Barefoot Quick-dry Aqua Socks Slip-on for Men Women Kids

Lightweight & Flexible & Convenience

The whole water shoes are lightweight, elastic and can be bent as a small piece, that is easy to put in the package and take it wherever you want.

Quickly Dry&Breathable

These water shoes with quick drying fabric,soft and breathable, the upper is also elastic,flexible and comfortable.

Anti-Slip

These soft Aqua socks which non-slip rubber sole provides strong support and is strong enough to protect your feet from gravel, stone and rough ground.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 6550 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 10"L x 6"W x 8"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 6550
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"L x 6"W x 8"H for use in ponds up to 33' wide

User questions & answers

Question:	What size and type is the outflow fitting
Answer:	No, it plugs into a controller which plugs into a power supply to the wall. The controller is the magic because that's where you adjust the speed of the pump.
Question:	is this 110 or 220 pal
Answer:	Not sure as this is intended as an aquarium pump
Question:	How long is the warranty
Answer:	Thank you for your inquiry. The heat retention capabilities of this product have not been tested. This water boiler product can only maintain the heat and dispense when it is plugged in. Please contact Zojirushi America Customer Service at 1-800-733-6270 for further assistance or email [email protected]
Question:	Can anyone explain why the 8000 GPH is smaller than the 4000, 5200 or the 6550? Does not make sense to me - I would think it would be larger
Answer:	No, this model requires electricity to dispense water. Zojirushi does make a model, CW-PZC22/30, with an air pump top so you can heat an go.