13 best shallow sump pumps

Product description

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

Troubleshooting:

Primary causes for malfunction impacting the automatic switching function:

o A clogged vent hole (small debris, seeds, pine needles)

o A contaminated switch housing (algae, slime or other materials accumulated on the switch underside).

From the Manufacturer

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

• I switch technology turns pump on and off by sensing the presence of water; removes water down to 3/8 in. Of surface
• 1/4 hp; max. Flow rate is 3000 gallons per hour; 1850 gph at 10 ft. Of discharge lift
• Can be left unattended to remove water
• Submersible reinforced sealed thermoplastic construction.Voltage:120V
• The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Garden hose adapter

User questions & answers

Question:	I currently have window well pumps that "check" for water every so often. Wondering how the thermaplastic holds up in winter/cold? Any concerns
Answer:	This is our first winter for the pump. Ours sits in a bucket with washed stone under and around the bucket. Our window well is also covered for the winter . We'll find out for sure in a couple months.
Question:	Can I leave this pump outside year round? Will it freeze up? How cold can it be before I have to take it inside
Answer:	I packed up the pump and stored it indoors for the winter. The freezing and thawing will not be good for the unit.
Question:	Is this pump corrosion resistant
Answer:	Yes
Question:	is check valve required
Answer:	A check valve is not required, but would be a good idea to have one on the pump.

Product description

Features: - Compatible with Flat PVC Hose in 0.98’’ and 1.26’’ inches - Screw Thread in NPT1-1/4’’and NPT5/8’’ - Auto Float Switch: Start/Stop Automatically - Rugged and High-Quality Materials - Designed and Manufactures with Valid Safety Requirements - Lower Noise and Energy-Efficient - Oil-Free Motor, Requires no Maintenance - Thermoplastic Body Resists Corrosion - Great to Drain the Dirty Water from the Pond, Garden Pond, or Water Tanks - Perfect for Household & Utility Applications of Transferring Water from One place to Another What's in the Box: - Water Pump - Power Adapters Technical Specs: - Power Supply: 400W (0.5HP) - Construction Material: Engineered ABS and Metal - Power Output: AC 110V 60Hz - Qmax: 1,980 gallon/H (7,500L/H ) - H.Max: 26.25ft. (8 Meters) - Power Cord Length: 16 feet - Type: Water Pump (blue) - Diameter of Pipe: Screw thread in NPT1-1/4” & NPT5/8”. Flat PVC Hose in 0.98’’ and 1.26’’ inches - Applications: Garden, Yard, Swimming pool, Pond, Flooded Area - Product Dimension (L x W x H): 6.2’’ X 6.1’’ 12.4’’ –inches

• POWERFUL SUCTION: This 400W powerful sump pump submersible has a Qmax of up to 1,980 gallons per hour (7,500L/H) and H.Max of up to 26.25ft. (8 Meters) and can easily tackle any draining job in just a short period of time
• RESISTS CORROSION: The basement sump pump submersible is made with heavy-duty engineered ABS and metal construction material and it features a highly rugged thermoplastic body that resists corrosion to withstand years of repeated use
• MULTI SIZE OUTLET: SereneLife water pump is compatible w/ flat PVC hose in 0.98" & 1.26" inches & it is equipped w/ screw thread in NPT1-1/4" and NPT5/8". Perfect for household & utility applications of transferring water from one place to another
• AUTO FLOAT SWITCH: This submersible pump with float is designed & manufactured w/ valid safety requirements. Features sump pump float switch that automatically starts/stop the pump and can be set by adjusting the float switch in its latching holder
• VERSATILE APPLICATION: Has a lower noise operation and highly energy-efficient. Features an oil-free motor and requires no maintenance. Great for draining the dirty water from the swimming pool, basement flood, tub, garden pond, or water tanks

User questions & answers

Question:	What size check valve and where to buy
Answer:	The thermal overload protection is a last line of defense to protect the motor and prevent a fire if the pump runs dry, or locks up due to something getting stuck in the impeller. It is not meant to routinely turn the pump on and off. For that application you should use a sump pump with a built-in float switch.

Product description

1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0', corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.

The Wayne 1/2 HP 1680 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2600 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.

• 1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging
• Removes water within 1/8-inch of surface
• Glass reinforced housing prevents rust
• Connects to garden hose with 3/4-inch adjustable discharge adapter
• 1-year limited warranty.Requires 2 5/8 inch of water to prime

User questions & answers

Question:	What is the PSI of this pump? ...Or what height does it pump up water? I don't see that spec
Answer:	I have re-read the documentation that accompanies the pump and nowhere does it state PSI or head (height) capability. My experience with draining a 500 gallon holding tank: discharge is not high pressure, less than a hose connected to the house; it will pump at least an 8' head. The pump did not deliver 2500 gph.
Question:	Anyone use this for dirty water and how did it handle it? Did the debris pass thorough or clog it
Answer:	The first thing is what you mean by "dirty", that's the problem. I have used this pump for very dirty water full of leaves, branches, and muck and it definitely clogs without the modifications I describe following. The main thing that restricts what passes through this pump is the size on the intake port on the bottom of the pump which is only a little over an inch. The port has to be kept small to maintain the vortex inside the lower bell of the pump. It is the vortex that moves the water, not the impeller like other pumps! This means that if you have a lot of small particles, it is possible for a clog to occur at the elbow at the output port shown in the picture. More likely, however, the clog will occur at the smaller intake port. Generally speaking, anything that can make it through the intake port will exit if there is not some restriction at the output port. This means, for maximum dirty water flow, you have to do two things. First, swap out the provided elbow meant for connecting a garden hose, and attach a system of standard 1 1/4" pvc pipe from your local hardware store. If you want to connect to a hose, use an adapter at the end of the pvc pipe (or better yet, use a flexible large diameter discharge hose sold on Amazon). The second thing you need to do is prevent objects larger than the intake port on the bottom of the pipe from trying to enter the pump (such as leaves, etc.) To do this, place a metal 1/4" or 1/2" metal screen across the bottom of the pump held in place with duct tape. Then, ideally, place a couple of 1/2" or so stick at the bottom to prevent the pump from sitting on the bottom of whatever you are pumping out. If you do both these thing, this pump is fantastic and can move a lot of water at impressive pressure for an immersible pump of it's size! Worse case, the attached bottom screen will clog and then you just have to lift the pump and sweep your hand across the bottom to remove the debris. If not do not do both of things I have mentioned, it will clog very easily due to the small intake port and if you use the restrictive elbow provided! I have used many different kinds of pumps of all types and this is best consumer type dirty water pump I have used but you need to make the modifications that I have mentioned which are very simple and cheap. I can try and post a picture of my modifications.
Question:	Do I need a garden hose attachment or does it come with one ? Also, if there isn't a float, what kind and where do I get one? Thanks
Answer:	It comes with 3/4-inch adjustable discharge adapter and connects to garden hoses. I unscrewed the 3/4 " adapter to fasten a pvc adapter on my pump so I was able to use 1 1/4 " corogated plastic hose when pumping water off my pool cover. It works faster with the larger plastic hose. Sorry I do not have any info about floats.
Question:	What is the lift
Answer:	Lift is how far ABOVE the pump it will pump liquid. example: 10 ft. lift means it will pump liquid 10 ft. above the level of the pump. Normally the higher the lift, the lower amount it will pump.

Product description

Let Our Pump Meet Your Expectation!

The Pump Can Works as A Sprinkling Pump or A Pump for Irrigation and Water Transportation.



●Automatic ON/OFF Water Removal Pump

Unique switching technology turns the pump on and off by sensing the presence of water,you don't have to worry about removing the water.

●Reinforced Sealing Thermoplastic Structure

The pump features a durable thermoplastic structure and a compact design to ensure that the submersible pump can be used again and again without corrosion, Remove stagnant water from any environment.

●Applicable Scene

Remove stagnant water from any environment, suitable for use in farms, swimming pools, fountains, flooded basements, and drainage in typical residential or commercial water transfer applications.



Specfication:

Material: Metal and Plastic

Types of Plug: US Plug

Item: Garden Pump

Size: 33 x 20 x 23cm/ 12.9 x 7.8 x 9 inch(L x W x H)

Rope Length: 110cm/42.9inch

Power: 1200W

Voltage/Frequency: 230V/50Hz

Head Max: 42m

Capacity: 3200L/H



Note:

▲The max suction height is 7/23ft and it takes some time before automatic pumping.

▲Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is, the better the effect.

▲Impurities are not allowed in the water and there is a jam if the diameter is more than 1mm.

▲There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term. Water Inlet and outlet need to be sealed up when you connect pipes.



Package content:

1 x Pump, 1 x Manual

• ✔ Durable Construction: The front part of the water pump is made of stainless steel while whole body sturdy cast iron which is not easy to rust and extends life
• ✔ Strong & Powerful: 1200W/1.6HP Power, Fan cooled continuous-duty 115 volt motor draws water up to 23 ft while 137 foot head lift provides enough water and pressure for a magnitude of jobs
• ✔ High Frequency: 66 PSI water pressure makes this water pump perfect for irrigation or water transport. 700 Gallon Per Hour rating tackles any draining job at a fraction of the tim, Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer
• ✔ Portable & Convenient: With safe and waterproof on/off switch and easy carry handle for convenience and portability. Lightweight with the energy efficient, high flow, and oil-free design brings more convenience to your watering
• ✔ A Necessity: The pump is compatible with a tank and can work as a well pump, a sprinkling pump or a pump for irrigation and water transportation that can be widely applied in garden, pool and lawn. Ideal for ponds, pools, sprinkling systems, flow irrigation systems, gardening, large aquariums, etc

User questions & answers

Question:	How many gpm can it transfer
Answer:	No, max head on this pump is 320', you would likely need a 1.5 HP at least.
Question:	can i hook up my water hose to the pump and use it as a booster
Answer:	The maximum pressure at the discharge is 90PSI when water is completely shut off( 0 flow). Not sure if this answers your question. If you want to know how much flow in a application requires certain pressure after raising up water from the well, you can either provide more information or use our Total Dynamic Head Calculator and looking up from the pump curve.
Question:	Is there a spec showing pressure vs. flow
Answer:	Just as what you have seen in the photo, 2-3 feet depending on model of pump. Note that the proper gauge of cable should be chosen according to the Horse Power (HP) and the total length. Some companies selling pumps with long cable attached that may be too small which is not compliant to NEC code. Beware using under size wire as it can be dangerous! Google " Tuhorse Drop Wire Chart " to find the wire gauge that is required.
Question:	What size are the inlet and outlet thread? Will,a garden hose screw into it
Answer:	It says it can handle 300 feet of head, which is about 91 meters. That means 91 meters from the water level to the surface.

Product description

Specification: Voltage: 115 V Horsepower: 1/150 HP Overall Dimension: 6.3 x 6.1 x 4.3 inches Item Weight: 4 pounds The little giant pump is designed for in-pan placement, the 1-ABS shallow pan pump offers next generation technology for air conditioner condensate removal. Totally submersible pump with built-in, advanced mechanical switch that automatically triggers operation when condensate in the pan or reservoir reaches a preset level. Automatic shutoff occurs when the condensate level drops. Low weight, compact size, high lift and quiet operation make the Little Giant line of ABS pumps perfect for in-pan condensate and other wastewater removal.

• Shallow-pan tank style designed for in-pan mounting
• Bottom intake with 10 ft. maximum lift
• Stainless steel shaft
• 6 ft. power cord with 3-prong molded plug
• Integral float-activated switch and thermal overload protection

User questions & answers

Question:	Can this pump recirculate water from one location to another
Answer:	This pump isn't designed to recirculate. It utilizes a float switch, thus it's designed to empty a shallow reservoir and shut off. It's certainly capable of recirculating in the right conditions, but remember it's only rated at 205 GPH- not powerful by any standards.
Question:	how hight can Lyft en feet
Answer:	The specs say 10 feet, but at that height the pressure is minimal. Better at 8’ even better at 5.
Question:	what is the minimum water depth it will pump down to
Answer:	About 1/4". I've used mine since early summer, and it comes on every day at least once. It pumps 5 gallons of water in NO time.
Question:	what is the mimimum water depth this pump has to sit in? Can it sit dry and still work
Answer:	It can sit dry forever, so if your condensate pan evaporates, no problem. It triggers “on” at about 1” depth, and “off” at about 1 1/2” depth. I’ve had two of them for over 20 years and they still work fine. Use a check valve if you’re pumping to any height otherwise the water runs back on shutoff so the pump has to run much more often.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91250 1/4 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92341, 1/3 HP cast iron submersible sump pump with vertical float switch, will move water up to 2760 gallons per hour. Upgraded durable stainless steel impeller for improved performance. Equipped with suction screen to filter out large debris and handles up to 3/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/3 HP Sump pump moves up to 2,760 gallons per hour; pump will lift water up to 25' of vertical height
• Rugged cast iron construction; 10-foot cord length
• Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches
• 1-1/2 inch NPT discharge for high capacity pumping
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	I will not use a sump pit. Clarification: Does this pump require 3 1/2" of pooling water to trip on and off
Answer:	If you're not using a sump pit, don't use a sump pump. Get something else.
Question:	Do all units have two separate cords for the pump motor and float switch? I just received one, and the pump and float are wired separately
Answer:	They have separate cords however the pump cord has a receptacle you plug the float cord into joining the two. So you only have one plug to plug into your outlet.
Question:	What is the size of the outlet on this pump
Answer:	It is a 1/12inch outlet
Question:	Should I install a check valve with this pump
Answer:	It's a nice to have but not essential. Without a check valve, some water will return to the pool once the pump is stopped, but it doesn't really bother me.

Product features

Superior Pump 92341 1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch

Superior Pump builds pumps that are truly Built to Last and are 100% factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump 92341 1/3 HP cast iron submersible sump pump with vertical float switch, will move water up to 2760 gallons per hour. Upgraded durable stainless steel impeller for improved performance. Equipped with suction screen to filter out large debris and handles up to 3/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Automatic Switch

• Vertical float switch automatically turns on and off pump depending on the water level in the sump basin/pit.
• Piggy-back power plugs allows the pump to be used as either an automatic or manual pump.

Construction and Discharge

• Rugged cast iron construction.
• Cast iron provides superior heat distribution for years of optimal performance and reliability.
• Cast Iron’s heavier weight helps keep pump planted in the pit.
• 1-1/2" NPT discharge for use with 1-1/2" discharge pipe.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor

• 1/3 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 2760 Gallons per hour at 0'
• 1800 Gallons per hour at 10'
• 720 Gallons per hour at 20'

Product description

H2OPRO, 1/3 HP, Cast Iron, Submersible Sump Pump, Engineered By Zoeller, Vertical Float Switch, All Stainless Steel Hardware, Pumps 50 Gallons Per Minute, Thermoplastic Vortex Impeller, 1-1/2" Discharge, 8' Power Cord, Sump Pit Diameter Required, Minimum 10"W x 24"D Basin, 1 Year Limited Warranty.

• 1/3 HP Cast iron submersible sump pump with standard 1-1/2" NPT discharge to meet commercial code requirements
• Sump pump with vertical electromagnetic switch to fit in 10" or larger pits - features convenient 8 ft. double-sealed power cord
• Non-clogging vortex impeller that protects the pump and passes 3/8" solids
• Professional grade sump pump engineered by Zoeller - Max flow rate 50 gallons per minute
• Energy efficient motor protected in rugged epoxy coated cast iron housing keeps motor cool for long life

User questions & answers

Question:	how do you adjust the water turn on and off
Answer:	The float itself cannot be adjusted to different heights. If you have any other questions, please call our technical support team @ 1800-742-5044. Thank you.
Question:	can this be used outdoors
Answer:	Yes, this can be used outdoors. You'll want to make sure that it is installed in a basin or pit that is at least 18" deep. You'll also need to bring it indoors if temperatures drop below freezing.
Question:	What is the startup and running watts of this pump
Answer:	Startup watts for this pump are 1265W (11A x 115V). Running watts are 632W (5.5A x 115V). If you are sizing a generator, you'll want to add about 20% to those wattages (so 1500W startup and 760W running).
Question:	I need sump pump model 024488 would this be it
Answer:	Yes, the model #024488 is the 1/3 hp H2O Pro sump pump.

Product description

Top discharge is perfect for tight spaces where water removal is needed laundry tubs, window wells, buckets, bathtubs, etc. Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, shower stalls, etc. 30 ft. Max head removes water down to 1/16 in. Of surface, virtually dry! multi-ring suction strainer filters debris, and minimizes clogs

• The pump should be unplugged once the water is no longer being moved, or pump will run dry.
• Assembled in the US with foreign and domestic parts
• Multi-flo technology allows easy selection of the appropriate discharge for the application
• Top discharge is perfect for tight spaces where water removal is needed; window wells, buckets, etc.
• Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, shower stalls, etc
• 30 ft. Max head.; removes water down to 1/16 in. Of surface, virtually dry. For removing water from flooded basements, boats, stock tanks, and even a 5 gallon bucket
• Max. Flow rate is 1257 gallons per hour: 900 gph at 10 ft; 3/4 in. Corrosion Resistant Brass discharge outlets, with tethered cap seals, fits any standard garden hose
• Eliminate standing water in your yard, and the risk to attract mosquitos. Use the WaterBUG to stop the bugs!

User questions & answers

Question:	I’m pumping out ground water under our in-ground trampoline. It’s no where near pumping 1200gph. Any idea why
Answer:	It's 1200gph measured at the discharge port of the pump, but that number drops significantly depending on the length of the hose. The longer the hose, the lower the gph.
Question:	Is this pump sensitive to temperature and if so what is the safe temp range of water to flow through it
Answer:	I used it to pump out water in my in ground swimming pool this winter. The water temp was just above freezing and the pump worked great.
Question:	If left plugged in amd sitting on the basement floor will it automatically start pumping when it senses water over 1/16" deep
Answer:	I don't know if it is automatic or not, but the way we do it is 1) set it in the water with the hose hooked up and 2) plug it. Because the seats have a dent in the hot tub it is hard for it to pump the water but it does get pretty much all of it. It is an amazing pump.
Question:	Is this pump fairly quiet
Answer:	Very as it stopped working the first time I used it. On way back.

Product description

Homdox Submersible Water Pump Is Great for Draining Garden Pond, Water Tanks, Pools, Hot Tubs, Flooded Areas, etc. It Will Be A Necessary Tool For Every House.



Specification:

Material: Plastic and Metal

Colorr: Blue, Red

6 Types for your chocie: Type 1 Blue US Plug, Type 2 Red US Plug, Type 3 Red EU Plug, Type 4 Blue EU Plug, Type 5 Gray UK Plug, Type 6 Gray EU Plug

Full Size: 21 x 16 x 29cm/8.2 x 6.2 x 11.3inch (W x D x H)

Output Tie-in Diameter: 2cm/0.8inch

Cable Length :480cm/187.2inch

Switch Size: 10 x 7.5 x 3.8cm/3.9 x 2.9 x 1.5inch (L x W x H)

Weight: 3.3kg

Power: 400W

Voltage: 110V 60Hz

Head Max: 5M

Capacity: 8000L/H

Type: Water Pump

Applications: Garden, Yard

Quantity: 1PC



Package Content:

1 x Water Pump

1 x User Manual





Note:

Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures, but not the same performance on different bodies as on the model. Thank you!

• 【1/2 HP (400W) Power】 Powered by a durable, oil-cooled electric motor. Featuring 400W and 2112 gallons per hour pumping capacity can help to move water away from locations quickly.
• 【Ingenious Design】Outlet can be adapted for different size hoses. Three fittings with different diameters for outflow (1” ,1.25”, 1.5”) to choose from according to the flow rate. The bigger the flow is, the wider the outlet should be.
• 【Automatic Float Switch】Automatic shut off float provides more safety. When the water level rises above 8 inch, the pump will start working automatically under the control of float switch. When the water level is under 8 inch, you should hold up the float for pumping water. Notice: once the pump can not pump any water, you should put down the float switch or cut off the power immediately. If not, that will lead to the coil burned.
• 【Higher Base Plate】This sump pumps has a higher base plate which assures the prevention of debris collection in the sump pit. Don't worry about getting stuck any more.
• 【Great For Draining】Great to Drain the Dirty Water from the Pond, Garden Pond, or Water Tanks. Great to move water for garden irrigation or cleaning your yard or road.

User questions & answers

Question:	Can I use this pump as a feed from the lake to a power washer
Answer:	Yes if electricity is available and the sump pump is not resting on lake bottoms
Question:	How far can it suck water? Will this run water 30’-50’ away
Answer:	It goes as far as the hose you attach to it. It is a very good pump.
Question:	Can the water outlet be turned sideways instead of straight up
Answer:	no
Question:	Does it work with salt water pools
Answer:	Worked with mine. I cleaned and stored until recently, still works fine.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92250, 1/4 HP thermoplastic submersible sump pump with vertical float switch, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Sump pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10-foot cord length
• Tethered float switch to automatically turn the pump on/off
• 1-1/4 inch or 1-1/2 inch NPT discharge for high capacity pumping
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	Does it matter if the float switch is on top of the pump or beside the pump for the pump to work properly
Answer:	Either way works. My float died after a few months. I had to transfer one off an old pump.
Question:	how high will it pump water
Answer:	My pump sits about 2 feet below the concrete in the basement, horizontal for 3 feet and up 9 ft. It is pretty powerful and should eject water pretty high, however you should install a backflow close to the pump so what doesn't get ejected doesn't fall back to the pump, and pump tries to eject in an endless cycle.
Question:	What is the hottest temp water is this pump rated for
Answer:	Hi there,The pump is tater for water temps up to 120 degrees.Thanks
Question:	Can I remove the float switch as I need to use this in a bucket with holes drilled to prevent leaves to drain a pool
Answer:	Just to be clear, I have read more than once in the responses about cutting the tethered float or removing it to use another switch or use the pump as just a utility pump without a switch. There are 2 separate plugs, one to the pump and one to the switch. The switch is not hard wired to the pump and can be removed or not used by not plugging it in. Piggyback refers to plugging the pump and switch together (they are made to plug together then plug into your receptacle) to use in a sump pit to keep water cycled out so as not to burn out the pump. If you want another switch there are many choices like a vertical float switch for limited space in the sump pit, plugs and piggybacks the same way it just positions the switch in a more narrow configuration for a smaller space.

Product features

Superior Pump 92250 1/4 HP Thermoplastic Sump Pump with Tethered Float Switch

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92250, 1/4 HP thermoplastic submersible sump pump with tethered float switch, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Automatic Switch

• Tethered float switch automatically turns on and off pump depending on the water level in the sump basin/pit.
• Piggy-back power plugs allows the pump to be used as either an automatic or manual pump.

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4" or 1-1/2" NPT discharge for use with 1-1/4" or 1-1/2" discharge pipe.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

• 1/2 HP; Maximum flow rate is 4118 gallons per hour; Ability to lift water from 23ft maximum submersible depth to 23ft high
• Built-in automatic ON/OFF switch, no external float switch required. Manual mode for continuous duty use in watering application
• Bottom suction design with ability to remove water down to 1.37 inch of surface and pass up to 1.37 inch grains; 25ft power cable allows the pump to be removed conveniently
• Easy-to-carry handle for portability; Lower noise and emergy-efficient motor with thermal overload protection; NPT 1 inch discharge; Included hose adapter fits 1-1/2, 1-1/4 or 1 inch hose
• UL certificated. Use for flooded basement, swimming pool, pond and garden.

User questions & answers

Question:	What are the dimensions of the pump
Answer:	Doesn't matter, it will fail after 6 weeks and neither Amazon nor the seller will step up. Have exchanged email with the manufacturer who is also an Amazon seller and haven't heard from them in a couple of weeks.

Product features

Product description:

Output power: 1/2 HP

Max height: 23 feet

Max Flow: 4118 GPH

Max. submersible depth: 23 feet

Max grain size: 1.37 inch

Max pressure: 7.25 PSI

Length of cable: 25 feet

Max fluid temperature: 95 ℉

Diameter of pipe: NPT 1"", NPT 1-1/4"", NPT 1-1/2""

Product description

Package Included:

1pc 100W Solar Panel

1pc 12 Volt 180W Solar Pump / Pond Pump Solar

1pc 20A USB Charge Controller

2pcs 16ft Solar Cable with Connector



20A LCD Display PWM Solar Charge Controller

Battery voltage:12V/24V auto

Charge current: 20A

Discharge current: 20A

Max Solar input: <50V

USB output: 5V/2A

Self-consume:<15mA

Operating temperature: -20~+60 ℃

Size/Weight: 138*85*30mm /150g

Install hole size: 124*50mm



12V DC Water Pump

Rated power: 180W

Outlet dia : 25M/M- 1 inch

Max Head: 7m

Speed: 3000r/min

Max Flow: 3 m³/h

Weight: 6.613lb / 3kg

Dimension: 240MM(H)*140MM(D)

Service Voltage: DC 12V



100W Poly Solar Panel

Rated power: 100W

Open Circuit Voltage(Voc): 21.6V

Maximum/Peak Voltage (Vmp): 18V

Short circuit current (Isc): 6.11A

Output Tolerance: ±3%

Temperature range: -40℃to +80℃

Frame: Heavy duty aluminum

Size: 39.4*26.4*1.4inch (1000*670*35mm)

Guarantee of power: 90% within 10 years 80% within 25 years

• [ Wide Application ] - The 100w solar water pump system offers an ideal solar water pump solution for remote watering without electric power, like garden, farm irrigation and tank filling, etc.
• [ Large Flow ] - 12V water pump max flow: 3 m³/h, large delivery volume, high delivery pressure, aimed at the maximum class of solar water pump.
• [ Lightweight Pump ] - The 12 volt well pump is compact size, lightweight, and easy carrying. Recommend to use flexible hose for easy operation.
• [ Easy to Use ] - Easy hookup to the solar panel, battery, controller, car or boat. All it needs is a sunny day.
• [ Updated 2.0 Controller ] - 4 work modes of 20A LCD Display PWM USB charge controller for protecting the solar pond pump and controller from continuous working. It helps the 100w solar water pump system to keep the lifespan lasting longer.

User questions & answers

Question:	what size battery do i need. I see someone got a 12v marine and the other 12v car
Answer:	i use marine
Question:	Can the solar panel be connected to the pump through the controller without including a battery? Or, can you use the controller without a battery
Answer:	Mine won't work without battery. I wish it did.
Question:	does this have an auto shut off if it detects air
Answer:	No
Question:	Does this unit have run dry protection or float switch to turn the pump off if there is no water in the sump
Answer:	I don't think it has either. Still don't have unit operating. Pump mismatched with panel,going back and fourth w/fister