10 best garden water feature pumps

Product description

This Beckett Fountain Pond Pump Kit is ideal for small water features. This fountain reaches a maximum lift of 48 inches and has different stream settings that pump a maximum of 160 gallons per hour. Low water auto shutoff is a a key safety feature of this device. Pump should only be on when fully submerged. If it is not fully submerged, it risks overheating. Auto-shutoff keeps pump and its surrounds safe in the event of a low water level. Great for indoor water structures that have a changing water level. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The pump operates oil free, eliminating the risk of water contamination. Includes 6 foot power cord.

• SUBMERSIBLE FOUNTAIN PUMP: Enhance your water feature with his device. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• INDOOR OR OUTDOOR USE: Ideal for small fountains and ponds. Max height of fountain is 4.1 ft. Pumps water at adjustable rate, up to 160 GPH.
• AUTO SHUTOFF: Automatic low water shut off feature, making it extremely safe to use in water features that have varying water levels.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1/4 " or 1/2" tubing.
• INCLUDED: Fountain pump and 6ft power cord. 2-year limited manufacturer's warranty.
• Pumps 130 gallons per hour
• Automatic low water shut off

User questions & answers

Question:	Does the auto shut off stay off until there is enough water or does it keep trying to restart
Answer:	It shuts off and stays off
Question:	Are nozzles/sprayheads included? I can't figure out what the pieces in the photo are other than the pump itself. Thanks
Answer:	No, it is just a replacement pump for an existing fount. Included are the pump, a small tube, and the tube connector pieces you mentioned. Use this item to replace a burnt-out or non-functioning pump .
Question:	What are the dimensions of the pump itself
Answer:	Sorry i dont any more but it is vey small was uning it in a dush under some rocks for my lizard
Question:	M200 AUL is it submersible
Answer:	Yes. I have it under water attached to a fountain in my pond

Product description

"The Pennington Aquagarden auto shut off fountain pump has been designed for use in fountains or ponds, either indoors or outdoors. the auto shut-off feature of this pump recognizes when the water level in your fountain drops too low. This prevents the pump running dry, overheating and ‘burning out’.

The economical, compact design pumps water around your water fountain and the adjustable flow control gives you the flexibility to change the height and speed of the water. The high surface area inlet pre-filter cover is Designed to minimize blocking and reduces cleaning frequency so you can spend more time enjoying your attractive water fountain.

• Auto shut-off safety feature to prevent burnout.
• Economical and compact motor.
• Adjustable flow control Valve.
• Reduced cleaning; The inlet design minimizes blockages.
• Two-year guarantee for added peace of mind.

User questions & answers

Question:	is the power cord a quick connect? I need to thread it through a 1/2" opening in the bottom of the fountain
Answer:	I would contact the manufacturer. A lot of pumps are rated to handle a certain range of water temperatures. Some pumps will use the water as a coolant, where others have high temp seals to deal with hot water.
Question:	Can a filter and skimmer be attached to the Pennington Aqua Garden size 300-500 pump
Answer:	probably not as a chemical add pump. Should be fine with small concentration if you add bleach to holding tank.
Question:	I want to attach a submersible filter to the pump. Is there an inlet pipe in the filter cage so I can attach the filter
Answer:	if your going to use in salt water, flush it out with fresh water when done.
Question:	will a washing machine hose thread onto this
Answer:	They are the same build, different flow rates.

Product features

Auto Shut Off Fountain Pump – 150 – 300 To Run Fountains or Ponds

This pump has been designed for use in fountains or ponds, either indoors or outdoors. The Auto Shut-off feature of this pump recognises when the water level in your fountain drops too low. This prevents the pump running dry, overheating and ‘burning out’. The economical, compact design pumps water around your water fountain and the adjustable flow control gives you the flexibility to change the height and speed of the water. The high surface area inlet pre-filter cover is designed to minimize blocking and reduces cleaning frequency so you can spend more time enjoying your attractive water fountain.

• Auto shut-off safety feature.
• Economical, compact motor.
• Adjustable flow control valve.
• Reduced cleaning – inlet design minimizes blocking.

Pennington Aqugarden Premium Auto Shut-Off Fountain Pump

The Pennington Aquagarden auto shut off fountain pump has been designed for use in fountains or ponds, either indoors or outdoors.

The auto shut-off feature of this pump recognizes when the water level in your fountain drops too low. This prevents the pump running dry, overheating and ‘burning out’. The economical, compact design pumps water around your water fountain and the adjustable flow control gives you the flexibility to change the height and speed of the water.

Technical Specifications

Max Flow Rate: 292 gal/hr

Max Pumping Height: 5'6"

Pump Dimensions: Height 3.6" , Length 5.6" , Width 3.4"

Fits Hose: 1/2" , 3/4" , 1"

Product description

This Beckett 3/64 Horse Power Pond Pump Kit is ideal for small ponds, up to 35 sq ft. This fountain reaches a maximum lift of 78 inches and has 19 different stream settings that pump a maximum of 500 gallons per hour. It has three different nozzle attachments, each creating a distinct effect that will undoubtedly add dimension and allure to your garden and backyard water feature. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast variety of flora. The pump operates oil free, eliminating the risk of water contamination. Includes 15 foot power cord.

• SUBMERSIBLE POND FOUNTAIN PUMP AND KIT: Add beauty to your pond with choice of spray head, water bell or bubbler adaptor. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• OUTDOOR OR INDOOR USE: Ideal for small ponds and other water statuaries up to 7' x 5'. Max height of fountain is 6.6'. Pumps water at adjustable rate, up to 500 GPH.
• LOW MAINTENANCE: Pre-filter (included) keeps the pump clean and prevents debris from entering, preserving the device. Simply Clean filter by disconnecting from pump and rinsing with clean water.
• EASY TO OPERATE: Attach desired fountain nozzle, place pump in sturdy location within the water, and plug into nearest outlet. Fits 3/8", 1/2", or 3/4" Tubing.
• INCLUDED IN KIT: 3/64 HP pump, filter, prefilter, 3 fountain heads, 2 extension tubes, 2-way control valve, 2 adaptors, and 15ft power cord. 2-year limited warranty. manufacturer's .

User questions & answers

Question:	we prefer to use the tube to make a waterfall (not a fountain). Is that possible with this unit
Answer:	this unit is very powerful - in my opinion, it has enough output to handle a waterfall. make sure you have extra filters on hand or make sure you regularly clean the filter that comes with the unit - it prevents a world of gunk from clogging the impellers inside the pump, especially if you have fish.
Question:	Our pond is 3 feet deep. If I bought extra extension tubes, is the pump powerful enough to push the water over 4 feet to make a fountain
Answer:	my pond is 2 ft deep, and it works well in my pond, but I'm planning on making mine deeper to 3 ft next month, I would think it would be fine but I'm not 100% sure.
Question:	can power cord be removed
Answer:	No the power cord as I view it cannot be removed.
Question:	With the 2 extension tubes attached to the pump how deep of water can the pump be placed in
Answer:	Here is an update on the pump.. I purchased a bigger pump that does 1350 gpm at Harbor Freight it is on sale for 59.00 and is 1/6 hp. I needed something stronger for my water fall tubes which is a total of 6. I may use this pump just a fountain feature. Its a good pump, but for my application, I needed something a little more powerful.

Product description

For 50 years, fishkeeping enthusiasts have looked to the Tetra name for products and solutions that add ease and beauty to their home. Whether you're an experienced hobbyist or just starting out, Tetra has everything you need–-from a large variety of quality fish food and innovative equipment to test kits and decor. The Tetra Pond Water Garden Pump is a versatile pump that can power waterfalls, filters, and fountain heads. Create a beautiful water feature within your pond by powering it with a reliable pump. Reliable magnetic technology provides energy efficient pumping to your pond. Adapters are included: 1/2 and 3/4 inch ID. This energy efficient pump comes with a 3 year limited warranty. This medium pump is 325 GPH. The higher the water is pumped above the pond surface, the less flow will result. Waterfall widths are approximately 1 in wide for every 100 GPH. For submersible use only. 12 foot power cord.

• WATER GARDEN PUMP: Powers waterfalls, filters and fountain heads in small outdoor ponds2 ADAPTERS: Includes two adapters to fit tubing ½-inch or ¾-inch in diameter.
• ENERGY EFFICIENT: Magnetic-drive water garden pump – 325 GPH.
• WARRANTY: Includes limited 3-year warranty – see product packaging for details.

User questions & answers

Question:	Does this pump have an inlet to connect to a water supply to use it for an outdoor water fountain
Answer:	no, not really it is intended to be an in-pond pump not an external pump, so the pump sits in the water submerged.
Question:	How noisy is this unit, anyone know? If I was to run this in my backyard for 24 hrs, would it disturb my neighbors and I in the night
Answer:	Hello. We have been running it 24 hours. and our BR window is about 20 yards away. We do not notice the pump noise.
Question:	What is the size of the output nipple
Answer:	I am rather certain it is 1". I am assuming you are referring to the thread size. Again I believe with good comfidence it is 1: NPT. Although an assortment of barbed nipples comes with the pump. I used 1" corrugated hose to service my old fashioned cast iron hand pump at the top of my spillway barrel. The pump supplies so much water that I had to dial it down to the minimum setting!
Question:	what is approximate maximum depth for outlet? Thanks
Answer:	I'm not sure that I fully understand you question and so to answer I'll tell you what I've done. The pump itself is approximately 9.5" high. The top part being the outlet pipe. I've set the pump on the bottom of the pond which is 22" deep. I have attached to the outlet pipe a hose that leads the water up to my waterfall which stands about 5' above the outlet pipe. My pond holds approximately 750 gals and the pressure from the pump is more than adequate. Hope that helps.

Product features

The right pump for your pond!

The pump you choose is based on the size of your pond and the pumping capacity in gallons per hour (gph). The pump should circulate the entire volume of the pond at least every two hours. For example, if you have a 1,000-gallon pond, you need a pump that handles at least 500 gph. When in doubt, you should purchase a slightly more powerful pump. You can always slow or divert the flow of a pump, but you can’t increase it.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 3100 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 8"L x 5"W x 6"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 3100
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 8"L x 5" W x 6"H for use in ponds up to 33' wide

User questions & answers

Question:	I have a 13ft x 2 ft circular fountain and am looking to run tubing through a water feature up 6 ft with a bell fountain head - would this work
Answer:	I use this pump to circulate water from a bottom pond (2000 gallons) to a top pond (900 gallons) for a waterfall. The water is pushed through 30 feet of 1.5 inch tubing up an incline of 5 feet. This pump circulates our water volume very well.
Question:	Does this have a threaded intake to allow connection of solid PVC pipe
Answer:	hello....I am presently far away from the pump (Az) in Europe and will not return back to Az before the end of August...sorry! Yet, I seem to recall that it did not have a threaded intake and I hooked it up to the PVC pipe with a short flex and clamps....hope it helps! I believe you meant "outtake" and not "intake" since the "intake" (where it "takes" the water in) is located underneath the pump itself, no hose, no pipe?
Question:	CAN YOU USE ONE INCH TUBING
Answer:	You can use any size tubing with the proper adapters however one must remember that using a small diameter tubing will increase the resistance and turbulence through the tube thus greatly reducing its flow capacity (its a logarithmic function). These types of pumps can handle high resistance on the output side however not at the input end so hopefully you are only referring to choking down the output and are willing to sacrifice the huge drop in flow as a result (note: expect a large pressure increase, similar to putting your thumb over the end of a water hose).
Question:	I'm confused. it's listed as a 3100gph but on the website it says maximum flow rate of 1100gph. which is it
Answer:	Hi Steve, the gph of any pump depends on the head pressure working against it. The Cyclone PAL3100 pumps 3100 gph at zero head. It pumps 2,251 gph at 5' of head, 1390 at 10' of head and 479 gph at 15' of head (according to the manufacturers literature). Head is roughly calculated by adding three things together, 1' of head for every foot of height from the surface of the pond to the highest point that the water will be pumped (if you could measure it straight up), another 1' of head for every 10' of tubing length, and another 1' for every sharp turn or obstacle like a UV unit or a 90 degree elbow). Sincerely, Nate at Practical Garden Ponds 484 356 5351 P.S. The reason there is sometimes conflicting information on Amazon is because multiple vendors share the same description and most of us don't have access to changing the information.

Product description

This Beckett Fountain Pond Pump is ideal for small water features. This fountain reaches a maximum lift of 8.2' and maximum of 430 gallons per hour. The Beckett magnetic drive pumps are efficient, low-energy units designed to run continuously without oil or seals that may fail. Using less energy than their direct drive counterparts, magnetic drive pumps can often save enough money in energy to pay for themselves in just one season. Magnetic drive pumps are low maintenance with only one moving part, a shaft with impeller. Their durable construction, corrosion resistance, and energy efficiency will make a magnetic drive pump an integral part of your pond system season after season. This Beckett Fountain and Statuary Pump is specifically crafted for small to medium water features or ponds. Its inconspicuous design, low profile, and quiet operation make this pump a must. Great for indoor water structures that have a changing water level. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The pump operates oil free, eliminating the risk of water contamination. Includes 16 foot power cord.

• SUBMERSIBLE FOUNTAIN PUMP: Enhance your water feature with his device. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• INDOOR OR OUTDOOR USE: Ideal for small fountains and ponds up to 6 ft. x 6 ft. x 1.5 ft. Max height of fountain is 8.1 ft. Pumps water at adjustable rate, up to 430 GPH.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1/2 " or 5/8" tubing.
• INCLUDED: Fountain pump 16ft power cord, and a large washable foam filter. 2-year limited manufacturer's warranty.
• Power source type: Corded Electric

User questions & answers

Question:	can the pumps be used out of water the pump goes under my fountain to spray water out the top
Answer:	pump must be submerged in water
Question:	Is there a similar pump with the long cord with auto shut off
Answer:	Well I just bought the Beckett 800 with a two filter set up. Liked it so much I bought another one. They don't have an auto shut off. I guess you could plug the pump in a timer. I let mine run 24/7 with no problems.
Question:	I have 80 gal preformed pond. Is this to much filter? Thanks
Answer:	I have 300 gallon pond. Love this pump. Would be great for 80 gal also because you would not have to clean it as much as I do. Get this one its a great value
Question:	Is the inlet threaded so I can add a barbed fitting
Answer:	The inlet has 3 little plastic 'threads' on it which are slightly raised. Not threaded like a screw, but it helps hold a tube in.

Product description

The Aquascape deco basin is designed to take the guesswork out of installing decorative water features. Handling flow-ratesup to 1, 500 GPH, the deco basin is easy to install & ideal for use with a wide variety of water features. Its lightweight & durable construction provides sufficient strength & weight distribution, supporting weighted to 50 lb. The Aquascape deco basin has a 15 gallon water capacity; minimizing time spent filling the feature. A pre-drilled hole in the center of the basin makes it easy to hook up your plumbing & the 54" Splash skirt prevents leakage due to splash-off. It measures 22" In diameter & 14. 25" Tall. Aquascape is passionate about the products we produce, providing unique products, designs, & features that stand above the competition.

• Comes compete with water reservoir and splash skirt
• Light weight and durable basin
• 54 inch splash skirt prevent leakage or over splash
• Designed for quick and easy installation
• Large center hole provides easy pump access

User questions & answers

Question:	If drained, can this unit be permanently installed and left in the ground in freezing temp? Other similar basins state 'bring inside during winter
Answer:	One of the differences is the WAPC 250 will pump the water down to 1/2". It has the pull cord. I am not sure about the base and how well it does keeping the pump upright and straining the items out.
Question:	What are the dimensions? I have a regular size bird bath that i want to make into a water feature
Answer:	You need an adapter to convert your two wires to an RCA male connector. Try the MOBOREST RCA Cable Audio Adapter, Phono RCA Male Plug to AV Screw Terminal Audio/Video Speaker Wire connectors Solderless Adapter(RCA Male-2pack).
Question:	DOes this come with a pump? Product information says no
Answer:	Hi, Joelhski! The Sony receiver is supplied with a remote. ~Ralph
Question:	Would this hold a bird bath fountain
Answer:	Hi, Surf8511! If you have one subwoofer, connect it to either of the SUBWOOFER OUT jacks. If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks. ~Ralph

Product description

This Beckett Pond Pump is ideal for medium sized foutains, waterfalls, and container gardens. This device will add beauty and enhance your small water elements. This fountain reaches a maximum lift of 85 inches and has different stream settings that pump a maximum of 250 gallons per hour. Pond pumps circulate and airate their environment, constructing an eco balance in which wildlife of all kinds, including goldfish, koi, and turtles can thrive, as well as a vast vaierty of flora. The black, plastic casing forms a hardy piece of equiptment. The pump operates oil free, eliminating the risk of water contamination. Includes 16 foot power cord.

• SUBMERSIBLE POND FOUNTAIN PUMP: Enhance your water feature with his device. Pumps oxygen into water, creating a healthy environment for plants and fish. By adding movement to the water, you avoid pond settling and becoming stagnant.
• INDOOR OR OUTDOOR USE: Ideal for small fountains and ponds. Max height of fountain is 7.1 ft. Pumps water at adjustable rate, up to 250 GPH.
• LOW MAINTENANCE: Simply clean filter by disconnecting from pump and rinsing with clean water.
• EASY TO OPERATE: Completely submerge pump under water, place in sturdy location, and plug into nearest outlet. Fits 1/2" tubing.
• INCLUDED: Fountain pump and 16ft power cord. 2-year limited manufacturer's warranty.

User questions & answers

Question:	Can you get an adapter to make 1/2” tube fit a 3/8” hose
Answer:	First, I have been using this pump for many years and find it very reliable. I found some 1/2 inch vinyl tubing that I force fit over the pump outlet. You should be able to find a fitting in the plumbing department. Sorry I can’t give you a more direct answer.
Question:	Is this pump 60 hz
Answer:	Yes.
Question:	How many watts is this rated
Answer:	115*0.55 = 63.25 watts
Question:	Is this pump a Versa Gold Series
Answer:	Ir took a photo of my Beckett Corp pond pump, it is model G210AG20, it is a VERSA gold series, from Irving Texas. it is 115 volt, .55 amp .We use it in a small pond, to handle water thru our box filter. we had to have a 1/2 inch threaded connection as a vent tube. this is the only one that fit.

Product description

Cost-saving, energy-efficient, and submersible, the Alpine Corporation Cyclone Pump is the perfect addition to your outdoor pond. This high-quality pump features a ceramic shaft that is oil-free, magnetic-driven, epoxy-protected, and has ceramic impeller shafts for a long life. The pump also has a vortex impeller with a large pre-filter, and can be dissembled without tools for your convenience. Install the pump vertically or horizontally to suit your space. Available in a variety of sizes, this Alpine Cyclone Pump pumps 4000 gallons per hour. With a 3-year warranty, you can be confident in the quality of your purchase. Measures 10"L x 6"W x 7"H for use in ponds up to 33 feet wide. Alpine Corporation is one of America's leading designers, importers, and distributors of superior quality home and garden decor products. Alpine's award winning in-house design team continuously develops new and innovative "statements pieces" for your home and garden. Your outdoor living spaces will be the envy of the neighborhood with our wide assortment of fresh, fashionable and contemporary products, from beautifully crafted solar garden stakes featuring patented motion and fiber optic lighting technology to gorgeous glass and glow-in-the-dark birdbaths and feeders.

• PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
• DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 4000
• ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
• EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
• EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10"L x 6"W x 7"H for use in ponds up to 33' wide

User questions & answers

Question:	Would a 1.5” flexible pipe work for this pump
Answer:	Hello, this pump takes up to two inches in tubing.
Question:	Does this pump have a warranty and if so will it be honored? Seems to be a fair amount of negative feedback in the comments
Answer:	I’m not sure about the warranty period. But I’ve been running my 4,000gph in my pond skimmer for almost a year without issue. It even ran semi-dry overnight after a falling branch knocked my pond drain open and I lost 14” of water. I bought another (same) pump thinking the one I was using would soon fail...it didn’t. I’m very impressed with this pump. It is quiet and powerful. So far, bullet proof.
Question:	i need a pump to run filter at end of pond and fountain at other end pond is 3 deep x 15' long 4 foot wide around 1500 gallons
Answer:	The PAL4000 will be marginal if you have no fish in the pond. If you have fish in your pond you will need at least the next size bigger. I personally would go two sizes bigger and you will have fewer problems with water circulation through the pump and fountain. The rule of thumb is the rating on the pump in gallons per hour should be 3-4 times the volume of water in the pond. You can't go wrong with a pump that is a little bigger than you need. You can always put a ball valve and return line to the pond that will regulate your fountain and still clean your pond water.
Question:	Does anyone know the correct inlet size fitting for the Alpine Cyclone
Answer:	I did not have an inlet I used this to submerge it in my existing pond and recirculated the water from the pond to my waterfall. It seems that when I put the pump in, it had an option to put an inlet water on it but I did not check it out since I was putting it in an existing pond. It works great.

Product description

This Beckett garden fountain kit is ideal for your pond, fountains, gardens and more. The kit includes a submersible pond pump that continuously operates. The weighted bases provides stability for the underwater pump. The pump creates a mini water garden that you can place virtually anywhere. The nozzles help create a tranquil sound of running water for your water displays. By aerating the water, the nozzles introduce air into the pond and create a healthy environment for fish and plants. With simple installation and operation, you will have your water displays looking stunning in no time with this kit. Take your backyard fountain from good to exceptional with this kit.

• SUBMERSIBLE PUMP: Enhance your water features with a small pond pump perfectly sized for mini water fountains and water gardens
• EASY INSTALLATION: The kit comes with all materials needed to simply install and operate the pump saving you more time to enjoy the peaceful ambiance the kit helps create
• DURABLE: Black plastic contruction resists fades and stains keeping your fountain pump in pristine condition
• VERSATILE: Use this kit for you water fountain, bird baths, garden fountains, and more!
• INCLUDED: This kit comes with a pump, two fountain nozzles, extension tube, foam filter and 6 ft. cord

User questions & answers

Question:	is the flow rate adjustable
Answer:	No it is not
Question:	How do you get the extension tube to fit on the adapter? The adapter I have doesn't match the one in the photo here. The tube doesn't fit over it
Answer:	Not sure I understand the problem exactly but I've had two Beckett pumps and they both have a little 1" or so connector that has two rubber ring washers - one on each end. One end fits in pump and the end accommodates the extension tube.
Question:	How do you know what size pump to buy
Answer:	It depends on how much water there is and how fast you want it to recirculate
Question:	can i use it in a fountain
Answer:	yes you can use it in a fountian