12 best roof slope for solar panels
The roof slope, also known as the roof pitch or angle, is an important factor to consider when installing solar panels on a residential or commercial roof. The slope of the roof can significantly impact the efficiency and effectiveness of a solar panel system. Here's what you need to know:
Optimal Roof Slope: The optimal roof slope for solar panels depends on your geographical location. In general, solar panels are most efficient when installed on a roof with a slope that is roughly equal to the latitude of your location. For example, if you live near the equator (low latitude), a nearly flat or slightly tilted roof might be suitable. In contrast, if you live in a region with a higher latitude, steeper roof angles may be more efficient.
Flat Roofs: For flat roofs, solar panels are typically installed using racking systems that allow for tilting the panels at an optimal angle, often between 10 to 15 degrees. This angle can be adjusted to maximize energy production throughout the year.
South-Facing Slope: In the Northern Hemisphere, south-facing slopes often receive the most sunlight exposure over the course of a day. Therefore, if possible, installing solar panels on a south-facing slope is often the most efficient orientation.
Adjustable Racking: Some solar panel mounting systems include adjustable racking that can be tilted to optimize the angle of the panels throughout the year.This allows for better energy production during different seasons.
Shading and Obstructions: Consider any shading or obstructions on your roof that may affect solar panel efficiency. Trees, nearby buildings, and chimneys can cast shadows that reduce the amount of sunlight reaching the panels.
Local Regulations: Check with your local building department or solar installation professionals to understand any local regulations or guidelines regarding roof slope and solar panel installations. Some areas may have specific requirements.
Aesthetics: While the efficiency of solar panels is crucial, the aesthetics of your installation should also be considered. In some cases, the roof slope may need to balance aesthetics with energy production.
Professional Assessment: It's highly recommended to consult with a professional solar installer or engineer who can assess your specific roof and location to determine the optimal roof slope and panel orientation for your solar panel system. They can also provide a detailed energy production estimate based on your roof's characteristics.
In summary, the roof slope is a critical factor when considering the installation of solar panels. While there are general guidelines, the ideal slope can vary depending on your location and specific roof characteristics. Consulting with a solar professional is the best way to ensure that your solar panel system is designed and installed for maximum energy production and efficiency.
Below you can find our editor's choice of the best roof slope for solar panels on the market
Duda Solar 25 Tube Water Heater Collector Slope Roof Frame Evacuated Vacuum Tubes SRCC Certified Hot
Product description
Duda Solar Water Heater Collectors are the most efficient solar collectors on the market. The evacuated tubes retain heat much better than flat panel collectors and therefore can work much more efficiently in cold climates. They also have a unique capability of obtaining higher efficiencies while the sun is at an angle in the east or west through passive tracking in the tubes. SRCC Certified and eligible for the 30% Federal Tax Rebate. May also be used with Duda Solar Aluminum Reflectors.
- Hailstone Resistance: up to φmm (1"), Max Operating Pressure: 87psi, Max Flow Rate: 5.25 gpm
- 14mm TU1 Copper Heat Pipes, Manifold insulation: 45mm 93 Kg/m^3 Rockwool, Rated Best Heat Retention
- φ58mm x 1800mm Three-Target Cu/SS-ALN(H)/SS-ALN(L)/ALN Vacuum Tubes, High Boron Silicon 3.3 Glass
- Sun Absorption Efficiency: 93-96%, Vacuum Rating: Less than 5.0 x 10^3 Pa, Lifespan:70% @ 15 Years
- OG-100 SRCC Certificate Number: 10001879, Eligible for 30% Federal Tax Rebate, Winter Resistant
User questions & answers
| Question: | How do you size this system? eg, Florida, one person, good S exposure, not much shade. is this system adequate? overkill? how do i tell |
| Answer: | NO. This is the 24V version. You need the 20L-12 version if you want to charge 12V battery. Thanks, ML SOLAR |
| Question: | Hi, I'm thinking of using a system like this to circulate hot water through in floor heating type tubing. How much water can I move per min |
| Answer: | Yes this is the GEN 3 charge controller |
| Question: | How is this system attached to an above ground swimming pool |
| Answer: | I would think that as long as the two batteries are in parallel that would work. I would check with Morningstar |
| Question: | can you use this to heat a pool in florida |
| Answer: | I tried and was not able to get it to work. Had to use dual charge controller. |
SOLPERK 100W Solar Panel 12V, Monocrystalline Solar Panel Kit with High Efficiency Module PV Power for Battery Charging, Off Grid Solar Panels for RV, Boat, Camper, Roof, Cabin, Shed, Home
Product description
Our company has an experienced professional technical team to help customers solve various solar charging problems, so that we can use pollution-free solar energy. That batteries will slowly leak after being stored for a period of time. And it will consume power for a long time, which will make the battery unchargable. Therefore, we can use our solar charger to charge and maintain the battery.
This product has the following characteristics:
1. Using high-efficiency monocrystalline solar cells, even if the panel is smaller than the traditional model, it still can achieve higher power efficiency.
2. Equipped with a charging controller, it has various protection functions that never cause any damage to the battery.
3. It is convenient to charge as long as there is sunlight to charge the battery.
4. Easy to connect. No need to pull long and complicated extension cords. At the same time it works under human body safety voltage and is very safe.
5. The surface is made of glass and easy to clean.
Reminder:
1. Before connecting the wires, separate the red and black clips to avoid collision and short circuit.
2. This product is a solar charging board which should be installed in a place where the sun is shining directly. The more sunlight, the better the charging effect.
Specification:
Solar Panel Type: Monocrystalline
Maximum Wattage: up to 100 watts
Current at max: 5.3A
Open Circuit Voltage: 22.5V
Operating Voltage: 12V
Size: 41.7*21.3*1.2 inch
Weight: 16.1 lbs
Packing list:
1x solar panel
1x alligator clip
1x waterproof controller
1xSAE cable
4 x Z-shaped solar panel aluminum alloy bracket
8 x long cap bolt with rubber washer
4 x short bolt
4 x nut
4 x spring washer
4 x flat washer
- 【Outstanding Quality】100W solar panel adopts well-built monocrystalline cells with high conversion efficiency up to 24%. Using Tempered glass, weatherproof film and plus aluminum frame for excellent extended outdoor use.
- 【Easy Installation】There are 4 mounting holes on the back. The Z bracket mounts that come with the product can easily install the solar panel on the wall and the roof without any extra maintenance.
- 【Controller】Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
- 【Multifunctional】When camping or traveling with family, it can be used in RV, car, boat, camper, jet ski, caravan, water pump, shed, etc.
- 【Warranty】25-year transferable power output; 5-year material and workmanship; 7*24h technical service support.
User questions & answers
| Question: | What battery can I use? A 12-volt |
| Answer: | Keep the solar panel controller and Battery as close as possible then run your 40 feet to the fan motor from the battery. You can keep the solar panel up to 20 feet away from the controller with no problem |
| Question: | Is the solar panel connection universal |
| Answer: | No |
| Question: | Is this charge controller waterproof |
| Answer: | Turn the USB port on and off also set the voltage at which it will automatically turn off if it goes below a certain voltage that you said like 11 or 12 volts so you don't run the battery down |
| Question: | Can i hace two 100w panels on this controller |
| Answer: | The solar panel is used to charge a 12 volt deep cycle battery. The battery is then connected to an inverter power supply that converts 12 volts dc to 120 volts ac. The answer to your question is no it will not power the shed by itself. The more batteries you use the more power you can store. One battery and a 1000 watt inverter should power a light and small power tools. |
Product features
Specification
Maximum Power: 100W
Maximum Power Current: 5.3A
Maximum Power Voltage:18.9V
Operating Voltage: 12V
Open Circuit Voltage: 22.5V
Short Circuit Current: 5.7A
Weight: 16.1lb
Dimensions: 41.7*21.3*1.2 inch
Solar Panel Type: Mono-crystalline
High Efficient Cells
Topping mono-crystalline solar cells with high transmission delivered high efficiency for modules. The conversion rate can reach up to 24% under Standard Test Condition.
Junction Box
High sealing junction box. It can effectively block water droplets and water vapor from outside. Even if soaked in water, the internal components will not be any damage.
Waterproof controller
Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
Waterproof Structure
Great waterproof performance. Tempered glass brings excellent waterproof protection for the panel. Anodized aluminum frame of good insulation and corrosion resistance let you leave it outdoors for decades without worries.
POWOXI Solar Panel 100 Watt Flexible - Updated 12V Off Grid RV Solar Panel for Marine RV Boat Cabin Van Car Uneven Surfaces Heavy-Duty Weatherproof
Product description
Solar panels for RV have good flexibility and are an ideal way to install on curvy surfaces such as RVs, boats, cabins, and roofs.
IP67 waterproof, you can safely stay outdoors to maintain and charge the 12V battery throughout the year.
Easy to install, transport, and disassemble.
1. More durable
Use ETFE material with a life of up to 15 years, which is 3 times the life of PET materials.
2. More efficient power generation
The 12v solar panel is made of crystalline silicon with the highest efficiency up to 23%.
Built-in 95% high light transmittance ETFE material, multiple refractions, reuse light energy.
3. Lighter, thinner, more energy
After testing and improvement, the size and weight of the rv solar panel are reduced while maintaining power.
Easy to carry and install it by yourself.
4. Waterproof and high temperature resistance
Special material covers the surface of marine solar panel. Equipped with an IP67 sealed junction box.
5. More convenient and flexible installation Good flexibility and 4 holes on the edge of the solar panels for RV meet a variety of installation needs.
You can use adhesive, silicone, Velcro and other tools to install solar panels on RV, boats, tents, roofs, etc. Product information:
Maximum power: 100 watt
Operating voltage: 12V
Open circuit voltage: 22.5V
Short circuit current: 5.7A
- 🌞【More durable】The solar panel is made of ETFE material with a lifespan of up to 15 years, which is 3 times the life of other PET materials. Suitable for maintaining and charging 12V batteries throughout the year. The cables on the 100 watt solar panel is compatible with MC4 cables or connectors. You can connect multiple panels in series or in parallel.
- 🚙【More efficient power generation】Flexible solar panel use the highest efficiency of monocrystalline silicon and ETFE materials with a light transmittance of up to 95%, and multiple refractions make the 100w solar panel charge faster than other products.
- ⛴【Lighter, thinner, more energy】In order to facilitate installation, our 12v solar panel is smaller than other 100W solar panels on the market. The flexibility of RV solar panel is also better.
- ☔【Waterproof, high temperature resistance】The IP67 sealed junction box and the solar panel surface with special technology have been strictly tested, and the solar panel 100watt will still work after rain. It can withstand extreme winds of 2400 Pa and snow loads of 5400 Pa. Special material covers the surface, waterproof, high temperature resistance, easy to clean, great for outdoor installation.
- 😀【More convenient and flexible installation】4 holes on the edge of the solar panels 100 watt. Fixed with silicon glues, adhesive, double sticky tapes, Velcro or zip ties, which is very ideal for non-permanent installation. Good flexibility, you can install it wherever you need, such as RV, car, truck, trailer, boat, cabin, tent, yacht, roof. Note that the red wire is positive and the black wire is negative. Order to enjoy a 12-month warranty and lifetime technical support!
User questions & answers
| Question: | Do I need to buy a controller? What size solar charge controller does this solar panel charger need |
| Answer: | Of course it would light the lights and eventually drain the battery. The amount of time the lights will be on depends on the wattage and the size of the battery. You also have to get lights that run off of DC current. |
| Question: | How can I install rv solar panel on my car.How did you install it |
| Answer: | Hello Yes, you can add another same watts solar panel. Connect them in parallel,they are suitable for 12v solar charge system, in series, they are suitable for 24v solar charge system. Please make sure the voltage of all parts of the solar charge system are the same. Thank you. |
| Question: | Does anyone know how much current this solar battery charger will output |
| Answer: | Hello, this panel will work with mighty mule gate opener, and mighty mule gate opener do comes with a controller box which is solar panel compatible, but according to the instruction from mighty mule, "NEVER USE THE SOLAR PANEL AND THE AC TRANSFORMER AT THE SAME TIME! It will damage the control board". You can find more information on your instruction about how to install the solar panel. Thanks |
| Question: | Is this solar panel pet or etfe |
| Answer: | The connector is within the depth of the frame |
Newpowa 210 Watt 210W 12V Solar Panel High Efficiency Mono Module RV Marine Boat Off Grid (210W Mono)
Newpowa
Product description
Newpowa 210W Monocrystalline solar panel Size:64.57*26.57*1.38inch The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Vistit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**
- 【New Design】Higher Cells Efficiency, Better Light Converting Rate
- Dimension:64.57*26.57*1.38inch, High winds (2400PA) and snow loads (5400PA)
- Maximum power: 210W, Voltage at Pmax: 17.0V, Current at Pmax: 12.35A
- Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
- 25-year transferable power output warranty
User questions & answers
| Question: | Can anyone who's used this panel give experience reviews or tips |
| Answer: | Yes, the product itself comes with a voltage regulator, so it can be connected directly |
| Question: | Is this unit the same as the npa210s-12h shown on the newpowa website or has there been an upgrade from this model |
| Answer: | Our solar panel itself comes with a voltage regulator, so you can directly connect the battery and solar panel. The included controller is not required. If you want to use the solar controller, you can cut off the two wires attached and connect to the solar controller. |
| Question: | Does this panel have tempered glass to withstand hail? i'm planning a roof mount on my rv/bus |
| Answer: | H is 12V and L is 6V |
| Question: | What is the warranty on this product |
| Answer: | You can buy different cords according to your needs, these cords can be found in other Amazon stores. |
Product features
Reliable
- Heavy-duty anodized frame that provides strong protection for the panel structure
- Multi-layered sheet laminations enhance cell performance and ensure a long service life.
Versatile
- Supported by a wide range of mounting options including flat surface, pole and wall installation
- Common applications includes RV, camper, SUV, marine, residential rooftop, remote farm, disaster relief, traffic signs, etc.
High-efficiency
- Uses Newest high efficient mono cells encapsulated in EVA (ethylene-vinyl-acetate)
- Pre-installed bypass diodes inside junction box that minimize power drops caused by shading
Specifications
- Dimension: 64.57*26.57*1.38 inches
- Weight: 27.56lbs
- Max Power Output(W): 210W
- Voltage MPP Vmp(V): 16.77V
- Current MPP Imp(A): 12.48A
- Voltage Open Circuit Voc(V): 19.83V
- Short Circuit Current Isc(A): 13.09A
Newpowa 100 Watt Monocrystalline 100W 12V Solar Panel High Efficiency Mono Module RV Marine Boat Off Grid
- 【New Design】Smaller in Size, Same Output, Higher Cells Effciency Compare to Most Other Brands
- Dimension:44.49*19.88*1.18Inch High winds (2400PA) and snow loads (5400PA)
- Maximum power (Pmax): 100W Voltage at Pmax (Vmp):17.0V Current at Pmax (Imp): 5.89A
- Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
- 25-year transferable power output warranty
User questions & answers
| Question: | Can this be connected directly to a portable lithium power bank (solar generator |
| Answer: | The threads on this whip hose are the same size as a standard garden hose. If a garden hose fits the threads on your wagner hvlp gun, then yes, this would work. It s designed to be used between the long, heavy hose and the spray gun in a hvlp setup, and has male threads on one end and female on the other. |
| Question: | What is the difference between monocrystalline and polycrystalline panels. Is one better than the other |
| Answer: | The 2049F - 6ft. Flexible Whip Hose will work with Titan Capspray turbine systems. |
| Question: | Is this solar panel compatible with the Zamp controller/charger |
| Answer: | Hello Clifford,Thank you for contacting 4hvlpdotnet;Note that the 2049F - 6-Foot Flexible Whip Hose is meant to be used as an extension to the air hose that would be provided with your system.As long as the 6003 Earlex system uses a hose with an inside diameter of 3/4" similar to Fuji's 25' air hoses, the 2049F would be compatible.Regards,Derek Campbell4hvlpdotnet |
| Question: | in direct sun. This can produce up to 100 watts of power correct? at somewhere around 17 volts? This is per hour correct |
| Answer: | You are also supposed to keep the turbine unit about 20 feet away from the spray area to prevent intake of overspray. Do not connect this whip hose directly to the turbine unit. Also as previously stated the unit gets op hot for this less sturdy plastic whip. |
Product features
Easy Installation
- The panel comes with four easy mounting holes with radius of 3.5 x 12mm, and two grounding holes with radius of 2.5mm
- With pre-attached 2.5ft MC4 connector, the panel can be quickly connected to other items
- Compatible with Newpowa z-bracket, tilt adjustable mount, and pole/wall bracket, the panel can be installed for various applications
Versatile
- Supported by a wide range of mounting options including flat surface, pole and wall installation
- Common applications includes RV, camper, SUV, marine, residential rooftop, remote farm, disaster relief, traffic signs, etc.
High-efficiency
- Uses high-performance Mono cells encapsulated in EVA (ethylene-vinyl-acetate)
- Pre-installed bypass diodes inside junction box that minimize power drops caused by shading
Specifications
- Dimension: 35.83*26.57*1.18 inches
- Weight: 15.43 lbs
- Max Power Output(W): 100W
- Voltage MPP Vmp(V): 17.0V
- Current MPP Imp(A): 5.89A
- Voltage Open Circuit Voc(V): 20.23V
- Short Circuit Current Isc(A): 6.25A
BougeRV 41in Adjustable Solar Panel Tilt Mount Brackets with Foldable Tilt Legs，Solar Panel mounting Support up to 180 200 300 Watt Solar Panel for Roof, RV, Boat, and Off-Grid
- 【MORE SUNLIGHT, MORE OUTPUT】Tilting design will get up to 50% more solar energy collection compared to horizontally mounted panels, which helps your solar panel to generate more power in different seasons for optimum performance.
- 【SUITABLE ROOF】Adjustable solar panel mounting bracket is supported 150——300 W solar panel of most brands, designed for off-grid solar systems and the max-width of the solar panel is 41inch. It can be used on RV, flat roofs, MARINE, boat, ground, garages, motorhome, or other flat surfaces.
- 【EASY INSTALLATION】Quick assembly with stainless steel fasteners and precise hole placement. Only 4 steps are required to complete the installation of solar panels. We have a PDF version of the operation manual, you can ask us for the installation manual at any time.
- 【DURABLE DESIGN】Made of rust-free aluminum alloy, Long-lasting and endure all climate condition, lightweight for portable design.
- 【WHAT YOU CAN GET】Aluminum Mounting Rails*4，Aluminum Tilt Angle Bracket*2，Steel Knob Bolt*6，Steel Wing Nut*6，Steel Flange Nut*4，Steel Split Lock Washer*4，Steel Flat Washer*4，Steel Hex Bolt*4，Steel Self-tapping Screws*6，Plastic Retaining Ring*6.
User questions & answers
| Question: | I plan on installing a 39”x65x1.5” (250W) panel to the roof of my truck. Do I need any other hardware to mount this bracket to the truck |
| Answer: | You can contact us (Gamil name:Bougerv) to get the instructions. Or download directly from "Product information" on the product page. |
| Question: | Does it have instructions |
| Answer: | Best way to store these FLAT would be to remove ONE of the bolts holding the support leg and either bolt all three pieces together on one end (remove bolt on other) or remove support bar entirely. I suggest the first as that way all the hardware is kept together. These supports are designed more for adjustment to sun angle, not as simple adjustment to FLAT fortravel. Can be done, just two more steps...Bolts are hand knobs so no real hardware for installation / adjustment (however may want wrench handy in case wing nut turns. |
| Question: | How are these supposed to store flat if the tilting support beams dont match holes when everything is seated flat |
| Answer: | Very sturdy. Had mine up on RV roof during high winds in Joshua tree National park. It never moved. Please note that my unit is kept free standing so I can move it around. Very good construction. |
| Question: | How do these hold up in the wind on the roof of an RV when tilted up, we have strong north and northwest winds and the backside would be facing there |
| Answer: | No, the Morningstar SunKeeper product line of charge controllers do not support lithium batteries. Morningstar’s TriStar MPPT, TriStar (PWM), ProStar MPPT, ProStar (Gen3), and SunSaver MPPT solar charge controllers support Lithium Ion (Li-Ion). If you have any additional questions, please don't hesitate to contact us. |
Product features
BougeRV 41" Adjustable Tilt Mount Brackets
The Mounting Brackets Tilts Rack is compatible with BougeRV 180W/200W solar panels, ECO-WORTHY Solar Panels, Renogy 160w solar panels, and the other brands, the power of the panel is recommended to go with 100W to 300W.
- Adjustable solar panel mounting brackets designed for off-grid solar system
- A great addition for use on top of an RV or other flat surface
- Quick assembly with stainless steel fasteners and precise hole placement
PACKAGE
Aluminum Mounting Rails*4
Aluminum Tilt Angle Bracket*2
Steel Knob Bolt*6
Steel Wing Nut*6
Steel Flange Nut*4
Steel Split Lock Washer*4
Steel Flat Washer*4
Steel Hex Bolt*4
Steel Self-tapping Screws*6
Plastic Retaining Ring*6
For RV
For Housing
ECO-Worthy Roof Solar Panel Mounting Bracket System Kit(for 1-4 Pieces Solar Panels)
- [Roof solar mounting system]: Suitable for metal roof, wooden roof, tile roof, cement roof. Unique design can be used for both flat roofs and pitched roofs
- [High quality]: The mounting bracket is made of all aluminum alloy, which is lightweight and strong. The aluminum surface is anodized and highly resistant to corrosion. The solar bracket can ensure a service life of up to 25 years in harsh environments
- [Easy installation]: The ECO-WORTHY solar roof bracket is compact in design and easy to install. It is very suitable for hanging solar panels. And the kits comes with an installation manual, so you don’t need to worry about installation issues
- [Compatible]: Suitable for any size rigid solar panels. Suggested solar panel thickness: 1.37inch (35mm)
- [Package includes]: 10 Rails, 10 T Blocks, 10 Self-tapping Screws, 10 L Brackets, 10 Waterproof Gaskets, 4 Edge Pressure Blocks, 6 Middle Pressure Blocks(each set of brackets can be installed 1-4 pieces Solar panels)
User questions & answers
| Question: | Can I install panels that are 67.3 x 39.1 x 1.57 in? Thanks |
| Answer: | The length of the bracket is 114.2in (2900mm) and the width is 29.4in (1000mm). It is recommended that the total width of the four solar panels does not exceed 105in, it will be ok |
| Question: | Can this be attached to a vertical brick wall with 4 panels |
| Answer: | Sorry I don’t know mines is in my back yard on a table that holds the whole rack,, works out pretty good. |
| Question: | What is the width of the base that is flush against the roof? I have a trapezoidal metal roof and want to ensure it can fit between the 3 inch gaps |
| Answer: | Yes, the bracket is made of all aluminum alloy, strong and durable, can withstand high wind (2400Pa) and snow load (5400Pa). It can be installed on a concrete flat roof |
| Question: | This mount can hold a hurricane winds? and can install it on a concrete flat roof |
| Answer: | When you purchase the panel brackets to connect them to the roof or metal stud which is attached on top of the you need brackets also some type of corking material to apply to brackets wnd screws once your done to prev by water entering the cab itself. |
Product features
Uneven roof
Suitable for all kinds of uneven roof
Strong bearing capacity
Wind resistance: 216 km/h
Snow load: 1.4 kN/m2
Good heat dissipation
Good heat dissipation to ensure the efficiency of solar panels
Long service life
All-aluminum material, highly corrosion-resistant, with a service life of more than 25 years
How to Installation？
A. Mark two horizontal lines on the roof(where the solar panel is planned to be installed), the distance between
them should be 2/3 of the length of the solar panel.
B. Mark five vertical lines that intersect with the two lines(from step A), the distance between each two is the
solar panel width plus another 0.78inch(20mm).
C. Get 10 intersection points from these horizontal and vertical lines. Drill holes at these points with suitable
tools, for fixing Self-Tapping Screws
Doheny's Solar Heating Systems for Above Ground Swimming Pools (2.5' x 20' Collector Kit)
Product description
SOLAR DOME POOL HEATING SOLAR SYSTEM: Easy to install with NO gas or electric connections! Heat your pool water the GREEN way using solar energy. Add weeks to your season with free energy from the sun! Multiple collectors can be connected in series to increase heating efficiency. Each dome can raise pool temps up to 10 degrees in approximately seven days. Dimensions: 28" L x 28" W x 12" H. Bypass kit REQUIRED for hooking up two or more heaters or pools that have a 1 HP or larger pump. ABOVE GROUND SOLAR HEATING PANEL SYSTEMS: These energy and money saving solar pool systems collect the sun's rays, warming the water that circulates through the panels channels and returns it to the pool! Collector kit can be mounted on plywood (as shown in image) and rests besides pool, or be roof mounted. Either option REQUIRES a roof/rack mounting kit. SOLAR PANEL COLLECTOR KIT CONFIGURATIONS AVAILABLE IN THE FOLLOWING SIZES: 2.5' W x 20' L; 5' W x 20' L (Comes as 2.5' W x 20' L Panels); and 5' W x 10' L (Comes as 2.5' W x 10' L Panels). **ALL SYSTEMS DO NOT INCLUDE PVC OR FLEX PIPES**. ABOVE GROUND ROOF/RACK MOUNTING KITS include all hardware necessary for mounting panels on roofs or sheets of plywood that will be installed on a slope (as shown in image). Kit includes 6' straps, 15 SS mounting brackets, and (15) #14 SS screws. 2-WAY DIVERTER VALVE can be plumbed into your filter/solar heating system and acts as an on/off switch. Includes diverter valve and spacer. ABOVE GROUND COLLECTOR SIZING CHART: 12'-15' Round = 2.5' x 20' Collector (40,000 BTU Rating); 18'-24' Round = 5' x 20' Collector (80,000 BTU Rating); 27'-28' Round = 2.5' x 20' & 5' x 20' Collectors (120,000 BTU Rating); 12'x24' Oval = 2.5' x 20' Collector (40,000 BTU Rating); 15'x30' & 16'x32' Oval = 5' x 20' Collector (80,000 BTU Rating); 18'x34' Oval = 2.5' x 20' & 5' x 20' Collectors (120,000 BTU Rating).
- SOLAR DOME POOL HEATING SOLAR SYSTEM: Easy to install with NO gas or electric connections! Heat your pool water the GREEN way using solar energy. Add weeks to your season with free energy from the sun! Multiple collectors can be connected in series to increase heating efficiency. Each dome can raise pool temps up to 10 degrees in approximately seven days. Dimensions: 28" L x 28" W x 12" H. Bypass kit REQUIRED for hooking up two or more heaters or pools that have a 1 HP or larger pump.
- ABOVE GROUND SOLAR HEATING PANEL SYSTEMS: These energy and money saving solar pool systems collect the sun's rays, warming the water that circulates through the panels channels and returns it to the pool! Collector kit can be mounted on plywood (as shown in image) and rests besides pool, or be roof mounted. Either option REQUIRES a roof/rack mounting kit.
- SOLAR PANEL COLLECTOR KIT CONFIGURATIONS AVAILABLE IN THE FOLLOWING SIZES: 2.5' W x 20' L; 5' W x 20' L (Comes as 2.5' W x 20' L Panels); and 5' W x 10' L (Comes as 2.5' W x 10' L Panels). **ALL SYSTEMS DO NOT INCLUDE PVC OR FLEX PIPES**
- ABOVE GROUND ROOF/RACK MOUNTING KITS include all hardware necessary for mounting panels on roofs or sheets of plywood that will be installed on a slope (as shown in image). Kit includes 6' straps, 15 SS mounting brackets, and (15) #14 SS screws. 2-WAY DIVERTER VALVE can be plumbed into your filter/solar heating system and acts as an on/off switch. Includes diverter valve and spacer.
- ABOVE GROUND COLLECTOR SIZING CHART: 12'-15' Round = 2.5' x 20' Collector (40,000 BTU Rating); 18'-24' Round = 5' x 20' Collector (80,000 BTU Rating); 27'-28' Round = 2.5' x 20' & 5' x 20' Collectors (120,000 BTU Rating); 12'x24' Oval = 2.5' x 20' Collector (40,000 BTU Rating); 15'x30' & 16'x32' Oval = 5' x 20' Collector (80,000 BTU Rating); 18'x34' Oval = 2.5' x 20' & 5' x 20' Collectors (120,000 BTU Rating)
User questions & answers
| Question: | Would this work for a 27ft above ground pool |
| Answer: | no, it also came missing parts and with holes in it. be careful. |
| Question: | Does this come with roof mounting hardware |
| Answer: | No, you need to order that seperatly |
| Question: | the description says it comes with the hardware, does this include a piece to attach to the pool hose? wr are very new to the 'pool life |
| Answer: | Yes |
| Question: | can it be used with a salt water system |
| Answer: | Dear customer, Yes, you can install 2pcs panels that are 67.3 x 39.1 x 1.57 in. Adjustable angle from 18° to 24° Degree. Any questions please do not hesitate to contact us by email, thanks and best regards, ECO-WORTHY |
ECO-WORTHY 100 Watts Solar Panel Off Gird RV Boat Kit :100W Mono Solar Panel +20A LCD Charge Controller+Z Brackets
Product description
Product Description
Here for sale is off grid solar home system kit consist of 100W poly solar panel, 20A LCD solar charger controller. Even on cloudy days, the panel still delivers a high power energy. The panel is covered with a special glass to protect against the bad environmental conditions suck as hail, snow and ice. And the panel frame is made of anodized aluminum to make the panel stability and durable.
Specifications：
ECO-WORTHY 100W MONO SOLAR PANEL
Rated power:100W
Open Circuit Voltage(Voc):21.6V
Maximum/Peak Voltage (Vmp):18V
Short circuit current (Isc):7.72A
Maximum/Peak Current(Imp):6.67A
Output Tolerance:±3%
Temperature range:-40℃to +80℃
Frame:Heavy duty aluminum
Size:996*665*35mm(39.2"x26.2"x1.4"）
Guarantee of power:90% within 10 years 80% within 25 years
20A 12V/24V CMG Solar PWM Charge Intelligent Controller
Rated charge current: 20A
USB Output voltage: 5V
DC output voltage: 12V
Short circuit recovery time: 10s
Open circuit voltage of solar panel: 40V
No load loss: 0.05W
Over voltage protection: 15V/30V
Float charge voltage: 14V/28V
Discharge recovery voltage: 12V/24V
Over discharge voltage: 10.5V/21V
Control mode: Software intelligent control
LCD screen display
Easy operation interface
Fully automatic operation
Microcontroller digital accuracy
Parameter user can reset
A key to open and close the load
PWM charging mode (SOC)
Temperature compensation (with external temperature sensor)
DC12V & USB 5V charging for DC lamp and phone
Package Include:
1 pc 100W mono Solar Panel
1 pc 20A solar charger controller
1 pair 5m Solar Cable
1 set solar panel mounting brackets
- Basic component for off-grid solar panel system, caravan, RV, boat, Green house solar panel system
- High efficiency 100 Watt Solar Panel with high quality frame, have excellent performance in harsh weather
- Easy installation with pre-drilled holes on the back of the solar panel
- Controller protection system: Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection
- Package included:1pc 100 Watt Mono Solar Panel,1/4 Z brackets and 1pc 20 A/LCD display ,1 pair 16FT extension cable
User questions & answers
| Question: | Please reply. i have. now a 100w panel produci g only 68% on sun peak time 5w when no sun how much will your produce |
| Answer: | Seems to work well maintaining two batteries. I think they are hooked up parallel. When I check individual batteries on the control panel they show equal charge. |
| Question: | I'm looking for a solar panel with a female 12v adapter to charge a power pack i already own. Will this model work |
| Answer: | Firstly, please clean the edges with acetone or a similar solvent this removes all the grease and oil from the roof Secondly, squeeze enough glue to the back of the solar panel. Thirdly, put the solar panel on the roof and press around slightly Finally, using the tape around the border of the panel to prevent any wind from getting under the panel while you're driving. |
| Question: | Can this item really produce 100watts or close to 100watts? What is the max charge this item can produce |
| Answer: | Dear friends, the 100w flexible solar panel comes with two MC4 cables. If you connect the two panels in series, use the MC4 connector directly in series. If you want to connect in parallel, you need to purchase a pair of Y branches. And the panel does not come with adhesive. |
| Question: | On Amazon this item is listed with two completely different dimensions. What is its actual size |
| Answer: | It says monocrystaline in the title but the seller answers that it's polycrystaline. Polycrystaline has sparkly blue crystal patterns and monocrystaline has black wafers. Since the panel is black I should think this panel is monocrystaline just as the title says. |
Product features
Step 1
Connect the controller and battery
Step 2
Connect solar panel and solar cable with connector
Step 3
Connect solar cable to controller
Step 4
Connect controller and load
100W Mono Solar Panel
- Rated power: 100W
- Open-Circuit Voltage (Voc): 21.6V
- Short circuit current (Isc): 6.13A
- Working current (Iop): 5.78A
- Size / Weight: 39.8*20.1*1.4 inch / 18.96 pounds
20A PWM LCD Dispaly Controller
- Battery voltage :12V/24V auto
- Charge current: 20A
- Working current: 5.5A
- Usb port: 5V/2A
- Size/Weight: 138*85*30mm /150g
Solar Cable
- 12AWG solar cable
- 16ft red cable and 16ft black cable to connect with solar panel
Mounting Z Brackets
- Material: stainless steel
- Size about 2.16*1.49*0.78inch
- Fits for solar panels installed on the RV,house,and boat
Customer Questions & Answers
Q: Which loads can our solar power system supply?
A: Our travel series of solar panels can power pumps, lights, car refrigerators, Heater, TVs, laptops, mobile phones, Tablets PC
Q: Why does the charge controller need a battery to use?
A: As a core component of a solar power generation system, the controller must be used with a battery.No controller can be used alone without a battery!
Q: How do I choose the right solar power system for me?
A: First, determine your application and load like : I want to provide 5 hours of lighting power for the 20W LED light of the camping tent
Finally, send the above information to us by email, and our team of technical engineers will provide you with the system that best suits you.
ECO-WORTHY Flexible Solar Panel 100 Watt 12 Volt Waterproof Monocrystalline Solar Panel for RV, Boats, Cabin, Roofs, Uneven Surfaces
- [New Technology]: shingled design black flexible solar panel, cell slices using conductive glue to interconnect instead of solder tape welding, reduces the probability of cracking and increases the utilization rate of incident light
- [Ultra Lightweight]: ETFE panel weight approximately 20% of a glass framed one. Size:45.3*21.1*0.15 inch, net weight:3.97 lbs
- [Extremely Flexible]: Can be bent 30 degrees for installation. Meet various applications where Standard panels are not convenient to install. Very suitable for RV, boat, cabin, tent or any curved surface to provide power
- [Highly Durable]: Rigorously tested, the 100W panel was designed to withstand extreme wind of up to 2400 Pa and snow loads of up to 5400 Pa
- [Self-cleaning]: Be free from maintenance, rainfall can cleans the dirt due to its nonstick surface
User questions & answers
| Question: | Do these panels have a bypass diode? (example: if i want to connect in series, and i get partial shading on one panel, will the whole string suffer |
| Answer: | Why is there 4 answers for a physical dimension? The picture shows one, a customer measured his about that, but the spec sheet and seller say a much different number. Please check again. |
| Question: | How do i attach flex solar panel on top of 2029 winnebego minnie |
| Answer: | this kit CAN BE upgraded, by buying a different brand. the charge controller is junk. it will not charge my battery that is less that 10% drained. |
| Question: | When buying the 200W (2 panel), does it come with all the connectors and the adhesive to connect together |
| Answer: | this kit will work way beyond that as long as you have enough batteries to hook it up to.it can charge your van battery and run 12 volt appliances through your cigarette lighter or run 120 volt appliances with an inverter that can handle the amount of watts you want to use.be careful of sensitive electronics while using a cheap inverter.you may need a sine wave inverter.i would highly recommend a good group of deep cycle batteries.the more batteries the more you can run.check out youtube for lots of answers.hope I was able to help |
| Question: | Is this poly or monocrystaline |
| Answer: | I purchased this system to act as a 'test bed' prior to buying my main dual-axis 2 panel system (Two 250W, 24V 8A panels). It's a monocrystilline 100w panel stated to output 5 amps, 12volts. I see consistent 13~14 volts at 4 amps, and have hit 5 amps on really good days (but 4A are more realistic). As a test item, I had it charging a 73AH Deep Cycle Gel battery from West Marine (the panel came with a 30A PWM charge controller). It worked fine and charged the battery in a matter of short hours ( I have both an amp meter and a volt meter connected to track its output). Previously, I was using two 45W amorphous panels (Harbor Freight) that took up to 4 days to do what this one panel can do in 4 hours. Buy with confidence. |
Product features
100 Watt Monocrystalline Flexible Solar Panel
Rated Power: 100W
Max-Power Voltage(Vm): 19.2V
Max-Power Current(Imp): 5.21A
Short circuit current(Isc): 9.12A
Open-Circuit Voltage(Voc): 23.4V
High Efficiency
Due to the upgrade of cell cutting technology and the use of new technology in the connection of battery wafers, the power generation per unit area has increased by 15%！
High Quality
Gridless design can significantly reduce the solar panel's hot spot effect due to shadowing
Upgrade Technology
Solderless tape design, using conductive adhesive to connect the solar cell units, with better bending performance
More Durable
Fewer internal resistance of wires, unique internal solar cell parallel circuit, reducing the solar cell's own loss
Solar Panel Mounting Brackets Corner Mount Kits Supporting for Framed Solar Panels,Installation On RV Caravan Boats Camper Trailer Marine Motorhome House Roof, Compatible with Renogy Solar Panel
Product description
This universal solar mount can handle solar panel with frame thickness of 40mm Max. Any solar panel whose frame is less than 40mm can be secure with height adjusting screws.
Soft material, such as rubber,can be placed in between the screw and frame to prevent scratch on the frame.
These solar mounts compatible with Renogy,HQST,Newpowa,Eco-worthy solar panel.
Part List:
Corner mount:4pcs
Middle mount:2pcs
Locking screws:24pcs
Height(solar panel frame thickness) adjusting screws:24pcs
- [Universal Solar Mounting Brackets]—This solar mount kit is so designed that it is applicable on solar panel of different size and different frame thickness. The solar panel frame thickness can up to 40mm.It can mount almost any aluminum framed solar panels,compatible with renogy,newpow,suner power,hqst,eco worthy, richsolar and the other brand framed solar panel.
- [Drill Free Or Drill Install Mount]--This universal solar mount is made from High Quality ABS super hard plastic.It a set of mounting bracket that help to secure solar panel to a desired surface, such as on vehicle,RVs,marines, roofs,motor homes,camping.Normally it is best for 20w,30w,50w,100watts,150w,200w solar panel.
- [Safer and More Practical]--With 4pcs corner mounts and 2pcs side mounts,which make the installation more solid and safer.This universal solar mount can lift up the solar panels, thus help increase air flow beneath the solar panel which can help reduce solar panel temperature, as a result, reduce solar power loss.
- [Easy to Install on Any Flat Surface]--Corner mount should be positioned around four corners of the solar panel.Side mounts can be used when the solar panel is so long & heavy that it might curve in the middle while it is lifted by the corner mounts. To add middle mount(s) onto middle section of the solar panel’s frame can solve this problem.
- [Durable and Long lifetime]--The mounting brackets are are very strength and durable,which make the brackets not easy to be broken.They can resist ultraviolet light. At the same time, they can’t be influenced by hot, cold or humid weather, which prolong the products’ lifespan.
User questions & answers
| Question: | Fits a 41cm panel eh? Hopefully the quality is better than the proof reading on the advertising documents |
| Answer: | On my 170w BougeRV panels there are six (6) slots for attaching brackets to each. So, for your 6 panels x 6 slots you'd need 36 brackets. You should buy 4 of the 8 unit sets and one (1) 4 unit set. |
| Question: | what kind of solar panel can these brackets mount |
| Answer: | They don’t give you an actual weight rating, but tell you it can support a 300 watt solar panel that typically weighs about 42 lbs. |
| Question: | Can you use these mounts if your solar panels do not have a frame |
| Answer: | 0.2cm/0.39inch |
| Question: | Do you mount these to the roof with van tape or screws |
| Answer: | I would call them a #8. They are about 1.5" long. Plated with something. They come with a silicone o-ring to seal above the bracket. I was concerned about the screws hitting wires that lay in channels in the foam under the luan roof of my RV so I used 3/4" #8 stainless steel screws (long enough to get fully through my luan roof cover but not go far into the foam). Because my luan is pretty thin (supposedly 1/4" but looks more like 3/16") I drilled a third hold and used three screws on each bracket. On the leading panel I used four screws per bracket and a third bracket on each side. |
TP-solar Solar Panel Kit 100 Watt 12 Volt Monocrystalline Off Grid System for Homes RV Boat + 20A 12V/24V Solar Charge Controller + 16ft Solar Cables + Z-Brackets for Mounting
- TP-solar 100W solar panel kits ideal for 12v battery charging, designed for RVs, cabins, homes, boats, caravan s, back-up and remote power use.
- This kits include 4pcs Z mounting brackets and 1 pair 16ft Red and Black Solar Cable makes it easy to set up. Easy to install with pre-drilled holes on the back of panel for fast mounting and securing.
- With the 20A charge controller with PWM funtion and LCD display , it can prevent the battery from over charge, over voltage, discharge and short circuit, reversed polarity protection, battery is fully protected. You can expand your system up to a maximum of 400W 12V system or 800W 24V system.
- Dimensions: 1160*510*35mm (45.6*20*1.37 inch). Weight: 15.84 lbs. Voltage at Pmax (Vmp):23V. Current at Pmax (Imp): 4.3A.
- Withstand high winds (2400Pa) and snow loads (5400Pa), strong tempered glass and aluminum frame for extended outdoor use, allowing the solar panel to last for decades.
User questions & answers
| Question: | Does this kit come with the standard 2 pin RV plug |
| Answer: | This 100W solar panel kit has the cable with the MC4 connector, there is no 2 pin RV plug. |
| Question: | Is this kit complete, do I need to purchase anything else |
| Answer: | Hello, this solar panel kit comes with a solar charge controller, 16ft Red and Black Solar Cable with MC4 Connector and the Z mounting Bracket. If you want to finish the installation, you may need extra solar cable. It all depends how far is the solar panel away from your battery. |
| Question: | What type of wire if I want to add extra cable |
| Answer: | 10 AWG or 12 AWG solar cable would be OK. |
| Question: | I am looking for something that would power a lamp, heater, or fan, will this work |
| Answer: | This solar panel works for charging a 12V battery, if you want to run a lamp, heater or fan, you may need a battery, you also need a off grid inverter if run 110V appliance. |
Product features
100 Watt 12 Volt monocrystalline solar panel
- 100W mono solar panel, with waterproof IP-67 rated junction box:
- Advanced water and dust proof level (complete protection against environmental particles and low pressure water jets).
Specifications
- Nominal voltage (Vmp) 23V
- Nominal current (Imp) 4.3A
- Open-circuit voltage (Voc) 27V
- Short-circuit current (Isc) 4.5A
- Cell efficiency 19.5%
High-efficiency solar cells
- Constructed by monocrystalline solar cell.
- High module conversion efficiency.
- Excellent performance in low-light environments.
Build to last for Decades
- Withstand high winds (2400Pa) and snow loads (5400Pa).
- Strong tempered glass and aluminum frame for extended outdoor use.
- Allowing the panels to last for decades.
PWM intelligent charge controller.
- Rated discharge Current: 20A.
- Battery Voltage: 12V/24V auto.
- PWM charging mode.
Reliable
Corrosion-resistant aluminum frame allows extended outdoor use; the panels can last for decades
Durable
Mounting hole ready, make it easy to mount with brackets.
Versatile
Can be used for many different applications
Latest Reviews
View all
Lawns
- Updated: 01.06.2023
- Read reviews
Hybrid Bike Accessories
- Updated: 10.05.2023
- Read reviews
Scroll Saw Accessories
- Updated: 16.06.2023
- Read reviews
Piece Puzzles
- Updated: 27.07.2023
- Read reviews
Ashley Dimmer Switches
- Updated: 16.07.2023
- Read reviews