14 best renogy solar panels

Product description

High in power but compact in size, the Renogy 100 Watt 12 Volt Monocrystalline Solar Panel is the perfect addition to any off-grid application. Shorter than the standard100W Solar Panel that Renogy carries but with the same power output, this panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, and more! Equipped with a junction box and male and female solar panel connectors, connecting to a controller or expanding to more panels is a breeze. Add one of these panels to your off-grid system today!





Specification

Maximum Power: 100W

Maximum System Voltage: 600V DC (UL)

Optimum Operating Voltage (Vmp): 17.9V

Open-Circuit Voltage (Voc): 21.6V

Optimum Operating Current (Imp): 5.72A

Short-Circuit Current (Isc): 6.24A

Weight: 16.5lbs

Dimensions: 42.2 X 19.6 X 1.38 In

Warranty Information：25-year transferable

Power output warranty: 5-year/95% efficiency rate, 10-year/90% efficiency rate, 25-year/80% efficiency rate , 5-year material and workmanship warranty

• 【Reliable】Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life.
• 【Durable】 positive output tolerance (0-3%); withstands high winds (2400Pa) and snow loads (5400Pa).
• 【Versatile】Use it for your RV when camping, or during beach trips with the family, either way this monocrystalline panel provides you with the most efficiency per space.Maximum Series Fuse Rating: 15A
• 【Installation Ready】Pre-drilled holes on the back of the panel allow for fast mounting and securing. Pre-drilled holes included for grounding. Compatible with different Renogy mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts.
• 【Warranty 】25-year transferable power output ; 5-year material and workmanship .

User questions & answers

Question:	What size is this
Answer:	21.30 wide47.05 tallIt's on their website. The measurements listed on this page are the shipping package size.
Question:	What kind of charge control do I need for this panel
Answer:	Depends on the power you want to deal with. A higher voltage battery bank will let you deal with more power in the panels since the controllers are amp limited. Just get a controller that will do the voltage. MPPT will get you 15-25% more power from your panels. Also If you are using lithium batteries you need a charger that you can set charging voltages manually.
Question:	when it says 100 watts, is that per hour, per a number of hours, how does that work
Answer:	Let's do some quick math, 100 watts in full sunlight on a summer day for 6 hours is 600 watt hours input to a 12 volt 100 amp hour battery. 600 / 12 volts is 50 amp hours. If you have a 100 amp hour battery and your final voltage when the sun goes down is 12 .6 volts you have a somewhat new lead acid battery. At 12.6 volts A new battery will give you all 100 amp hours of it's capacity by the time it reaches 12.0 volts. A 3000 watt inverter at 120 volts produces / uses 25 amps. 25 * 60 mins = 1500 amp hrs * 24 hrs = 36000 amp hours per day to feed the monster. Don't try too cheat the math it has no conscience, I can't afford the batteries yet. The only argument anyone can offer is you don't use it all 24 hours do you?, Bet me!
Question:	how many panels of 100 watts need to charge baterys to run a 3000 watts inverter?i have a 12 volts system
Answer:	No wrong answers here because it depends on how many amp hours of battery storage & how much power you use. I’m in NC where we have steady sun light. I am using (2) 100w panels to charge (4) 100amp hour Weize batteries. I am on a building project and use a 3000w inverters to run 12” desalt miter saw, pancake compressor & circular saw. I have power all day & full power the next day

Product features

Reliable

• Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life
• EL tested solar modules; no hot-spot heating guaranteed
• Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments
• TPT back sheet ensures smooth performance over a long period of time

Durable

• Positive output tolerance (0-3%); withstands high winds (2400Pa) and snow loads (5400Pa)
• Corrosion-resistant aluminum frame allows extended outdoor use; the panels can last for decades
• Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance
• IP65 rated junction box provides complete protection against environmental particles and low pressure water jets

Versatile

• Can be used for many different applications
• Compatible with ground mounts as well as different mounts offered by Renogy such as Pole Mounts and Tilt Mounts
• Compatible with on-grid and off-grid inverters

Installation Ready

• Pre-drilled holes on the back of the panel allow for fast mounting and securing
• Includes pre-drilled holes for grounding

Product description

Meet the Renogy 175W Flexible Solar Panel - the culmination of cutting-edge technology and precision. This ultra-lightweight panel can achieve up to an incredible 248-degree arc of flexibility thanks to advanced solar cell technology and lamination techniques. At 6.2 pounds, this panel weighs 70% less than its standard counterpart and is less than 5% as thick. This makes it easy to transport, install, and affixed to uneven surfaces. It's precisely this kind of adaptability that makes the Renogy 175W Flexible Solar Panel the ideal choice for airstreams, campers, and boats.



Mounting Recommendation: Modules must be mounted using silicone structural adhesive on the backside of the panel, grommets are only to be used for non-mobile applications. For detailed installation methods, please consult a local contractor for guidance.

• [Reliable]Multi-layered sheet laminations enhance cell performance and ensure a long service life. EL tested solar modules; no hot-spot heating . Bypass diodes minimize power drops caused by shade and ensure excellent performance in low-light environments. TPT back sheet dissipates heat to ensure smooth performance over a long period of time
• Bypass diodes minimize power drops caused by shade and ensure excellent performance in low-light environments; TPT back sheet dissipates heat to ensure smooth performance over a long period of time
• [Durable] positive output tolerance (0-3%), withstands high winds (2400Pa) and snow loads (5400Pa); A corrosion-resistant aluminum frame allows for extended outdoor use with a typical lifespan of decades
• [Versatile] Can be used for many different applications; Ground mount compatible; Compatible with on-grid and off-grid inverters
• [Installation Ready]Pre-drilled holes on the back of the panel allow for fast mounting and securing Pre-drilled holes are included for grounding Compatible with a variety of Renogy mounting systems such as Z-Brackets and Tilt Mounts
• Power Source Type: Solar Powered

User questions & answers

Question:	Why is the wire on the pos side so short? I’m having trouble finding branch connectors long enough to connect two panels
Answer:	Agreed. Makes no sense to have one cable so short. It also makes no sense to have diodes in opposite directions. Connecting 2 panels is a pain in the ass trying to find branch connectors. Renogy geniuses at work.
Question:	Where are the panels made
Answer:	their manufacturing video suggest asia: https://www.youtube.com/watch?v=AKC3iSrzntQ
Question:	Can I use this to charge jackery
Answer:	Absolutely. I charge my Flashfish 300W and it provides for basic lights and equipment use. I can use lights, pump, water heater, printer, laptop and phone all from my daily charge.
Question:	How do i attach panel to a fabric bimini. i didn’t realize there are not any holes in edges of panel before i purchased
Answer:	Bought two panels after using cardboard cut-and-tapes to posted dimensions to check fit on bimini. Checked cable route and run length with rope. Received the panels/cables and laid them out on bimini for 2nd fit check, positioned and outlined with chalk. Removed the bimini and a friend sewed two-inch velco hook tape onto the bimini, just inside of the chalk lines while I glued the opposing two inch wide loop tape around the perimeter of the panel bottoms using Marine Goop adhesive and putty knife. Waited two days for the adhesive to cure and while waiting, mounted the 100/30 Blue Solar charge controller, connected that to the battery ACR (automatic charge relay charging both house and start batts) and then connected the pre-measured panel cables. Then put the bimini back up, dropped the panels on (covered them with a towel to reduce chance of shock) and plugged them in! Removed the towels and watched as my batter monitor showed amps flowing into my batts! Those panels are on there good, but can still be removed for whatever reason. Sewing job on bimini and adhesive on panels have not budged in winds up to 30 kts, so far.

Product features

Renogy 175 Watt 12 Volt Monocrystalline Flexible Solar Panel

Meet the Renogy 175W Flexible Solar Panel - the culmination of cutting-edge technology and precision. This ultra-lightweight panel can achieve up to an incredible 248-degree arc of flexibility thanks to advanced solar cell technology and lamination techniques. At 6.2 pounds, this panel weighs 70% less than its standard counterpart and is less than 5% as thick. This makes it easy to transport, install, and affixed to uneven surfaces. It's precisely this kind of adaptability that makes the Renogy 175W Flexible Solar Panel the ideal choice for airstreams, campers, and boats. Mounting Recommendation: Modules must be mounted using silicone structural adhesive on the backside of the panel, grommets are only to be used for non-mobile applications. For detailed installation methods, please consult a local contractor for guidance.

-Dimensions: 59.2 x 26.5 x 0.08 in

-Weight: 6.2 lbs

-Panel Lead: 12 AWG, 17.7 in (Negative), 5.9 in(Positive)

-Junction Box: IP68

Package Includes

-Renogy 175 Watt 12 Volt Monocrystalline Flexible Solar Panel x 1

Product description

Adding a solar power system to an RV can create added convenience and savings. Adding solar panels can also help you dock and park your recreational vehicle without a power hookup, resulting in greater travel freedom. Unlike traditional gas generators, the Renogy 400 Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup. Specifications Renogy 100W Monocrystalline Solar Panel Maximum Power: 100W Optimum Operating Voltage (Vmp): 18.9V Optimum Operating Current (Imp): 5.29A Maximum System Voltage: 600V DC (UL) Renogy Adventurer 30A PWM Charge Controller (Negative Grounded) Nominal Voltage: 12/24 VDC Rated Charge Current: 30A Max. PV Input Voltage: 25 VDC Max. PV Input Power: 400W (12V) Corner Bracket Mount (Set) Material: UV-resistant ABS Plastic Recommended Adhesive Sikaflex 252 or alike Weight (each component) 7.2 oz. Renogy 30ft 10AWG Solar Panel Connectors Adaptor Kit Renogy 16ft 10AWG Tray Cables Renogy Solar Branch Connectors Warranty Information panel: 25-year transferable power output warranty: 5-year/95% efficiency rate, 10-year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories: 1-year warranty on rest of the kit components

• Designed for off-grid solar panel system, Caravan, RV, boat, Green house Solar panel system. Monocrystalline Solar Cell efficiency: 21%; Ideal output: 2000Wh per day (depending on the availability of sunlight).
• Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life.
• Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400PA) and snow loads (5400PA).
• Bypass diode minimizes power drop caused by shade and ensures excellent performance in low-light environments.Amperage:5.92 A
• The adventurer 30A pwm charge controller is specifically designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative grounded for Battery compatibility.

User questions & answers

Question:	Can I use the charge controller in this kitt for 800 watts
Answer:	No, 400w max.
Question:	What are the dimensions of your 100 watt panel
Answer:	Hello, The dimension are 47.3 x 21.3 x 1.4 in
Question:	Would you recommend this set for full time rv living
Answer:	Hello, Yes this kit is designed for full time RV living. This kit will power most of your everyday electronics.
Question:	Could this be used for home use such as running fans and maybe a fridge during a hurricane or blackout? Also how easy is it install
Answer:	You need more than 500W PV , 75AH + battery, solar charge controller and a 500W + continuous inverter. In FL only about 80% of the sun's energy reaches the surface for 3-4 hours. 500W becomes 400W for 3-4 and decreases towards dusk and dawn. Cheap inverters are only 70%-80% efficient. The 400W becomes 280W-320W. The battery similarly loses 70%-80%. You finally end up with 200W-220W which is not enough for a home fridge to run 3-4 hours per day. Using high efficiency inverters, charge controllers, batteries, can get you up to 300W, but it's cheaper to add more panels. For a home fridge I wouldn't consider less than 1000W of PV and 200AH of batteries. What you have is good for a few lights, fan, and TV. You might consider a 12V travel cooler to keep food cool.

Product features

Renogy RV Solar Kit

Renogy RV Solar Kits are carefully arranged to meet your RV needs. This kit includes a 100W Solar Panel, an Adventurer 30A PWM Charge Controller, a 30 ft 10AWG MC4 Adapter Kit, a 16 ft 10AWG Tray Cable, and one Renogy Cable Entry Housing. The choice between one set of Z Brackets or one set of Corner Brackets are also given.

The Adventurer 30A PWM Charge Controller is specifically designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative-grounded for battery compatibility. It also features an LCD screen for displaying system operating information and allows for full control of parameter settings. The control is embedded with self-diagnostics and electronic protection functions that prevent damage from installation mistakes or system faults.

100 Watt 12 Volt Compact Design Monocrystalline Solar Panel

Adventurer Li 30A PWM Flush Mount Charge Controller

Mounting Z Brackets

Cable and Connectors

-30ft 10AWG MC4 Adaptor Kit (One pair).

-16ft 10AWG Tray Cables (One pair).

-Cable Entry Housing.

-MC4 Y Branch Connector (for 200W-400W Kits).

Renogy Cable Entry Housing

The Renogy Cable Entry Housing is an ideal solution for cable entry through roofs. Made from ABS plastic, this waterproof and UV-resistant housing allows an easy cable entry solution for any condition. With its dual cable entry, this Renogy housing easily passes through solar cables for a smooth installation on virtually any roof surface.

Product description

Newpowa 200W Monocrystalline solar panel Size:64.57*26.57*1.38inch The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Vistit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

• 【New Design】Higher Cells Efficiency, Better Light Converting Rate
• Dimension:64.57*26.57*1.38inch, High winds (2400PA) and snow loads (5400PA)
• Maximum power: 200W, Voltage at Pmax: 17.0V, Current at Pmax: 11.76A
• Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
• 25-year transferable power output warranty

User questions & answers

Question:	What shipping method is used for this panel
Answer:	Hello We ship this panel by FedEx/FBA. The bubble wrap, corner post, and molded foam are used in the package. Best Regards Mona
Question:	Ef ecoflow power station efdelta ok to use
Answer:	just match your desired voltage to station always state specifications to many variations to effectively answer question
Question:	I see you do not include nor offer mounting brackets what’s up with that
Answer:	We used these panels on a 2019 Ford Transit conversion project. They work well and we installed them permanently on the roof with the following attachments, Renogy Solar Panel Mounting Z Bracket Mount Supporting for RV, Roof, Boat, set of 4 Units. We also used VHB tape under the brackets, 3M VHB Tape 4991, 0.5 in width x 5 yd length (1 Roll). Caulk around the bracket when you are done and you will have a very secure and waterproof installation. Dicor Corporation 551LSG-1 Edpm Lap Seal 10.3 Oz. Tube Grey, 10.3 Fluid_Ounces Best of Luck!
Question:	Is there 200w flexable panels available
Answer:	These panels are high quality rigged panels

Product features

Weather-proof

• Rugged design to withstand high winds (2400Pa), hail and snow load (5400Pa)
• Heavy-duty anodized frame that provides strong protection for the panel structure
• The panel and junction box are protected from common weather conditions and water splash (IP65 rating)

Versatile

• Supported by a wide range of mounting options including flat surface, pole and wall installation
• Common applications includes RV, camper, SUV, marine, residential rooftop, remote farm, disaster relief, traffic signs, etc.

Reliable

• Heavy-duty anodized frame that provides strong protection for the panel structure
• Multi-layered sheet laminations enhance cell performance and ensure a long service life.

Specifications

• Dimension: 64.57*26.57*1.38 inches
• Weight: 27.56 lbs
• Max Power Output(W): 200W
• Voltage MPP Vmp(V): 17.00V
• Current MPP Imp(A): 11.76A
• Voltage Open Circuit Voc(V): 20.23V
• Short Circuit Current Isc(A): 12.45A

Product description

Renogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit

Renogy 100W Monocrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary for a new system: a Renogy 100W 12V Monocrystalline Solar Panel, a 30A PWM Wanderer Charge Controller, a 20ft 10AWG MC4 Adaptor Kit, an 8ft 10AWG Tray Cable, and a set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.



Renogy Adjustable Solar Panel Tilt Mount Brackets

Renogy RV Tilt Mount Brackets allow for the mounting of Renogy 100W panels to the rooftop of a vehicle or other flat surface. Designed for off-grid systems, these solar panel mounts are easily adjustable and feature stainless steel fasteners. Suitable for any flat surface, this solar mounting system helps to optimize performance by tilt-positioning the solar panels while stationary, and then repositioning to flat while the vehicle is in the motion.

• Product 1: Includes 100W Solar Panel + 30A PWM Negative ground Charge Controller + MC4 Connectors +8Ft 10AWG Tray Cable+ Mounting Z Brackets for RV, Boat
• Product 1: Monocrystalline solar cell efficiency: 21%；The Charge controller has been upgraded to Renogy new 30A PWM negative ground charge controller The Renogy wanderer
• Product 1: With the Renogy wanderer 30A PWM charge Controller, you can expand your system up to a maximum of 400W
• Product 1: Ideal output: 500Wh per day; can fully charge a 50Ah Battery from 50% in 3 hours (depending on the availability of sunlight)
• Product 2: Adjustable solar panel mounting brackets designed for off-grid solar systems.
• Product 2: Quick assembly with stainless steel fasteners and precise hole placement.
• Product 2: Great addition for use on top of an RV or other flat surface.
• Product 2: Compatible with Renogy Solar Panels under 100W.

Product description

The 4800 WATT 48 VOLT Monocrystalline Solar Kit system is readymade for running typical active home appliances. Working with multiple appliances for all day use, this kit is designed to provide you with ultimate luxury freedom and satisfaction in generating / using your own power to provide a sustainable lifestyle. Used solar as a primary power source, this kit will be prepared for emergencies, some social events, and support multiple people power consumption. If you have any questions regarding this product, please call us at 1 (909) 287-7111 or email [email protected].

• versatile: ideal for off-grid systems such as medium remote cabins, medium remote homes, or even tiny houses. works with off-grid residential and commercial rooftop systems the midnite classic allows you to stack. multiple charge controllers, giving you more options for expansion
• safe: newly added midnite mnedc- quad houses included mnedc100 breaker which acts as a dc disconnect for protection of your battery bank and charge controller
• efficient: excellent performance in low-light environments high efficiency perc solar cells, black frame solar panel with the midnite classic charge controller, you can monitor your system remotely through a user's local network or via midnitesolar.com
• optional: works with off-grid residential and commercial rooftop systems the midnite classic allows you to stack. multiple charge controllers, giving you more options for expansion
• remotely: you can monitor your system remotely through a user's local network or via midnitesolar.com

Product features

Renogy 4800w Solar Kit

The 4800 WATT 48 VOLT Monocrystalline Solar Kit system is readymade for running typical active home appliances. Working with multiple appliances for all day use, this kit is designed to provide you with ultimate luxury freedom and satisfaction in generating / using your own power to provide a sustainable lifestyle. Used solar as a primary power source, this kit will be prepared for emergencies, some social events, and support multiple people power consumption.

Package Includes

• 15 x Renogy 320W Monocrystalline Solar Panel
• 1 x MidNite Classic MPPT Charge Controller-150
• 1 x Midnite Solar Combiner Box 510-0006
• 5 x MidNite Solar 15A-150 Circuit Breaker
• 1 x MidNite Breaker MNEDC100
• 1 x MidNite MNEDC- Quad Enclosure
• 1 x Renogy 8ft 8AWG Stranded & 5 x 40ft 10AWG Adaptor Kit
• 1 x Renogy 16ft 4AWG Tray Cable & 1 x 8ft 4AWG THHN & 1 x 8ft 4AWG Double Ring

Home

Cabin

Farm

• #1 RANKED SOLAR PANEL: Don't be fooled by imitations, KYNG is the innovator in Solar Panels and Generators! This is the fastest and most powerful 120W Solar Panel in the marketplace with built-in iSolar Technology! It can be used for MOST ALL Brands of Generators and Comes with many Connectors! Works best with KYNG generators.
• 100% GUARANTEE & 1 YEAR WARRANTY: That's right, if you're not completely satisfied we will provide a 100% guarantee and a 1 year warranty! Don't be fooled by the look alike imitations, KYNG 120W Solar Panel is RANKED #1 for a reason, ITS THE BEST! And we stand by that guarantee! PLEASE contact customer support for any questions!
• iSOLAR TECHNOLOGY & FASTEST CHARGE: This KYNG 120W Solar Panel can automatically adjust to the current and the voltage to ACHIEVE maximum Power, delivering the FASTEST possible CHARGE! The KYNG panel voltage regulator can keep your device getting stable current and prolong its life!
• BEST PORTABLE DESIGN AND CHARGE: The KYNG 120W Solar Panel is compact in size design for PORTABILITY. It can easily FOLD quickly and is lightweight! You can easily hang in on your backpack, use while camping, fishing, hiking, emergencies or for whatever your needs are! Equipped with 2*5V/2A and 1*5V 3A QC3.0 port, can automatically detect the device and charge at full speed, charging multiple portable device at the same time, including smartphones, tablets, digital cameras, etc.
• ULTIMATE COMPATIBILITY AND EFFICIENCY: 22%-25% Solar Conversion - DC port - USB Ports to Charge Any Device! Charging 18V1~3A laptops, 12V car battery and other 18V 1~3A DC-powered devices. USB port: smart phones, tablets, mini tab, external battery packs or any other USB devices! Comparing to most similar foldable solar panels, the KYNG 120W solar panel has upgraded the output to 120 watts. That means 50% faster charging time than other 120 watts.

User questions & answers

Question:	how many amps in the sun will it be putting out? what are it's ratings and specs
Answer:	Equipped with 2*5V/2A and 1*5V 3A QC3.0 port, Thanks
Question:	Does this panel have a blocking diode so the battery being charged is not discharged at night
Answer:	No
Question:	What is the best way to connect this to a car battery for trickle charging
Answer:	You would need an adapter with aligator clips one end and dc the other
Question:	Does this have Anderson connectors
Answer:	yes

Product features

Compatible with all Solar Generators!

For use anywhere outdoors! Fully waterproof technology!

Compact & Portable for easy carry and travel!

Comes with 3 USB Ports! Able to charge all of your device at once!

Product description

50W Monocrystalline Solar panel Size:23.07*19.88*1.18inch The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Vistit us at www.Newpowa.com for more details.

• 【New Design】Smaller in Size, Same Output, Higher Cells Efficiency Compare to Most Other Brands
• Maximum power (Pmax): 50W
• Voltage at Pmax (Vmp):17.0V Current at Pmax (Imp): 2.94A
• Pre-attached 3ft Wire with MC4 Connectors. Mounting Holes Ready(Mounts for Purchase Separately)
• 25-year transferable power output warranty

User questions & answers

Question:	I need to use 8ga or 10ga copper wire to extend range to 85'. Can I wire the panel this way
Answer:	It only puts out about 14 volts in full sun. At 85 feet you're going to lose a lot of energy.
Question:	What gauge cable do I need to hook this up to a controller
Answer:	Hello 14 gauge is enough. Thanks.
Question:	Can i use this panel on a portable generator if i have charging support for it
Answer:	This is standard solar panel? Why would you put it on a portable generator unless you want to maintain the battery for it?
Question:	I have a newpowa npa30-12. do i need additional components to trickle charge my boat battery
Answer:	Hello, you can use the 30w to charge your 12v boat battery directly, but please check the volatge more offten if you are not using a charge controller to avoid over charging. Thanks

Product description

Sometimes we all need to recharge our batteries whether we are camping, wanting to go off the Grid, or are Just looking to power Some appliances. The Renogy 100W 12V bundle kit comes with our 100W 12V Monocrystalline solar panel, 9in solar Adaptor Kit, & Renogy wanderer 10A PWM Charge Controller. Keep in mind that this kit allows the charge controller to be quite close to the solar panel, so you may still need an extension cable or longer wiring depending on your need. This bundle kit can be the perfect option for creating an off-grid solar System!

• El tested solar modules; no hot-spot heating.
• Corrosion-resistant aluminum frame allows extended outdoor use; The panels can last for decades. Pre-drilled holes on the back of the panel allow for fast mounting and securing.
• Backlit LCD screen of the charge controller displays system operation, diverse load control, and error codes.
• The wanderer 10A controller come with integrated 5V 2A USB ports to charge USB devices.
• Integrated Rs232 port allows communication with bt-1 Bluetooth module and usage of Renogy DC Home smartphone app.

User questions & answers

Question:	Can this be used with jackery 1000? they said i need 100w max, 12-30 volt and their port size is 8mm. anyone
Answer:	Hello , Our Renogy 100w solar panel can produce up to 100w and 12v . The Connection is a MC4 style connector. If you have additional questions or concerns please feel free to contact us at 909-287-7111 Monday through Friday 8:30 am to 5:00 pm PST
Question:	can this be used to run deck with hot tub
Answer:	I live in an RV and I do a lot of boon-dock camping and my system works fine. Now in order for that to happen I need to keep my fridge on gas and not electric because of the amps it draws but my micro, TV, laptop, phone charger and heater motor all work on solar as long as my batteries are charged. My suggestion is to do some research as to how many amps the hot tub heater and pump draws and how many hours a day/week you plan to use it and calculate the amperage, how many panels and batteries you will need and if you want to run deck lighting change all you bulbs to LED and go from there. I'm pretty sure that you will be bale to get this to work if you do your homework. Hope this helps and enjoy your day. Ken
Question:	Can this run a 16000 gallon pool? If not what do you have to accommodate my pool
Answer:	you need to calculate how much amp per hour you need and buy battery bank to supply that, it will not run your equipment directly. Also, the solar will not fully deliver 400watts to your battery bank, it depends on clouds, what state you live in if its in a direct sunlight and how long does the sun last on average (remember winter too if youre up north). You need to do further research or hire a professional to set it up for you.
Question:	Does this bundle kit come with the cables? They're in the pics but not specifically mentioned
Answer:	Thank you for the question! Yes, it will come with 9in MC4 to bare wire adaptor kit. Thank you, M.S.

Product description

Adding a Renogy 320 Watt 24 Volt black frame Monocrystalline Solar Panel to a home or commercial building is the first step in converting the structure from being energy-dependent to energy producing. Primarily used for residential and commercial purposes, rooftop solar power systems are the perfect way to decrease an electric bill. Also great for large off-grid systems, the 320W Monocrystalline Panel can be used in multi-panel solar arrays for cabins and sheds. The included PERC solar cells are efficient and help make the panel smaller and lighter. Compared to a regular 72 cell 320 watt panel this panel is 15-20% shorter and lighter. Complete a large scale project with 320W solar panels, perfect for on-grid or off-grid projects.

• EL tested solar modules; No hot-spot heating guaranteed; Minimizes micro-cracks; PERC Solar Cells, Black frame solar panel;Low power loss in cell connection; Better shading tolerance
• Capable of withstanding heavy snow load up to 6000 pa, wind load up to 4000 pa; Corrosion-resistant aluminum frame for extended outdoor use
• Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance
• IP68 rated junction box provides complete protection against environmental particles and low-pressure water jets
• Can be used for many different applications, even work sheds, garages, or camps; Ideal for residential and commercial rooftop systems; Ground mount compatible; Compatible with on-grid and off-grid inverters
• Power source type: Solar Powered

User questions & answers

Question:	can the system be adapted to a 12 v Marine Battery
Answer:	You need to match the voltage of your system. These panels are 24 volt. Renogy also has 12 volt PV panels. I have used both their 12 and 244 volt PV panels to power remote blowers and compressors.
Question:	good powers for air conditioning
Answer:	You need a lot of panels to power an air conditioner. First you need to determine the air conditioner load. Then you determine the number of panels you need. Then size a charge controller and finally size your battery storage.
Question:	It would be really helpful if you included all the technical information about these panels on the ad. What are the volts? 12,24? Amps, measurements
Answer:	24
Question:	Where can I get the specifications for these panels
Answer:	Hi Kirk, Thank you for the question! Here is the specification of the panel. https://www.renogy.com/content/RNG-320D/320D-Datasheet.pdf We will upload it to the product page. If you have any further questions, please feel free to let us know. We are more than happy to assist you. We can be reached at Neil

Product description

The new Renogy 100W Eclipse Lightweight Suitcase is perfect for those venturing off the Grid, providing both convenience & dependability in a slim footprint. Engineered to further improve on the solar suitcase, this model weighs significantly less. This lightweight edition with its attached handles is more portable than EVER for the adventurous Traveler.Operating Temperature: -40°F to 140°F

• High-efficiency Solar cells
• Lightweight design with side bag
• Low-voltage system to avoid electric shock hazards
• No assembly required
• Power Source Type: Solar-Powered

User questions & answers

Question:	How would i connect 2 of these panels in parallel to jackery 10p
Answer:	Thank you for the question! You would want to first make sure that the Jackery 1000 can handle 200w of input and in what configuration, series or parallel. If in parallel you would need to use a set of MC4Y branch connectors to attach the two positive MC4s together. Likewise with the negative MC4s. From there you would need an MC4 to whatever input the Jackery 1000 needs as solar input. If wired in series no MC4Y branch connectors are needed and the panels can be wired positive to negative with a single pos off of one panel and a single neg off of the second panel. Please make sure with Jackery before connecting the two panels how they should be connected. Thank you, M.S.
Question:	will this work with a jackery 240 portable battery? thanks
Answer:	Yes, will plug right into the Hackett dolor input.
Question:	I need to connect to jackery 240 (5mm? round dc connector) or what/where adapter to use
Answer:	Thank you for the question! You would need an MC4 to Jackery adaptor directly from Jackery to wire this panel into a jackery power station. Unfortunately, we do not sell adaptors for Jackery. Thank you, M.S.
Question:	This panel says Positive ground. Can I connect to a controller that is a negative ground with other negative ground panels
Answer:	That panel is not grounded at all and yes it can be attached to the Rover without issue.

Product features

Description

The Renogy 100W & 50W Eclipse Lightweight Suitcase combines highly efficient monocrystalline solar panels with a 10A PWM charge controller to create an easy-to-use, ‘plug and play’ system.

This system is specifically designed for mobile off-grid applications, where space and weight limitations are abundant.

Alligator clips included in this package make it easy to connect the panel to a battery in seconds. If one ever needs to connect a battery with a different type of end terminal, the alligator clips are attached via Solar Panel Connectors.

Product description

Renogy 200W Monocrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary for a new system: two Renogy 100W 12V Monocrystalline Solar Panels, a 30A PWM Wanderer Charge Controller, a 20ft 10AWG Solar Panel Connectors Adaptor Kit, an 8ft 10AWG Tray Cable, a pair of branch connectors, and two sets of Z-brackets. Start your solar adventure with a Renogy Starter Kit.

• Negative Grounding controller with battery reversed, overloading, short-circuit and over charging/discharging protection ensures the broader off grid applications and safety. Especially can be used on a vehicle which has battery negative on the chassis
• The Charge controller has been upgraded to Renogy' S New 30A PWM Negative-Ground charge controller - the Renogy wanderer.Short-Circuit Current (Isc): 6.24A
• With the Renogy wanderer 30A PWM charge Controller, you can expand your system up to a maximum of 400W.Open-Circuit Voltage (Voc): 21.6V
• Monocrystalline solar cell efficiency: 21%；Ideal output: 1000Wh per day; can fully charge a 50Ah Battery from 50% in 1. 5 hours (depending on the availability of sunlight)
• The kit now includes an 8Ft 10AWG tray cable to connect your charge controller and battery
• Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades

User questions & answers

Question:	dimensions of the panel
Answer:	Why is there 4 answers for a physical dimension? The picture shows one, a customer measured his about that, but the spec sheet and seller say a much different number. Please check again.
Question:	Can this kit be upgraded to the better controller
Answer:	this kit CAN BE upgraded, by buying a different brand. the charge controller is junk. it will not charge my battery that is less that 10% drained.
Question:	Looking to get a solar option for charging laptops and small electronics in my van (vandweller). Would this work? or need x
Answer:	this kit will work way beyond that as long as you have enough batteries to hook it up to.it can charge your van battery and run 12 volt appliances through your cigarette lighter or run 120 volt appliances with an inverter that can handle the amount of watts you want to use.be careful of sensitive electronics while using a cheap inverter.you may need a sine wave inverter.i would highly recommend a good group of deep cycle batteries.the more batteries the more you can run.check out youtube for lots of answers.hope I was able to help
Question:	How many amps are charging the battery while inuse, on a sunny day
Answer:	I purchased this system to act as a 'test bed' prior to buying my main dual-axis 2 panel system (Two 250W, 24V 8A panels). It's a monocrystilline 100w panel stated to output 5 amps, 12volts. I see consistent 13~14 volts at 4 amps, and have hit 5 amps on really good days (but 4A are more realistic). As a test item, I had it charging a 73AH Deep Cycle Gel battery from West Marine (the panel came with a 30A PWM charge controller). It worked fine and charged the battery in a matter of short hours ( I have both an amp meter and a volt meter connected to track its output). Previously, I was using two 45W amorphous panels (Harbor Freight) that took up to 4 days to do what this one panel can do in 4 hours. Buy with confidence.

Product features

Description:

The Renogy 200W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. Adding a polycrystalline or monocrystalline solar panel kit can extend your travels further.

This solar kit comes with the tools necessary for a new system: two Renogy 100W 12V Poly/ Mono Solar Panels, one 30A PWM Wanderer Charge Controller, one 20ft 10AWG Solar Panel Connectors Adaptor Kit, one 8ft 10AWG Tray Cable, one set of Solar Panel branch connectors and two sets of Z-brackets. Start your solar adventure with a Renogy Starter Kit.

Product description

If you're looking for a convenient and portable power solution, the Renogy 100W Monocrystaline Foldable Solar Suitcase is an ideal choice. The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. Weighing in at about 26.60 lbs., this lightweight suitcase includes two 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller with an LCD Screen for power regulation, one 10ft tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability. The Renogy 100 Watt Solar Suitcase will make charging on the go as easy as 1-2-3! If you have any questions regarding this product, please call us at 1 (800) 330-8678 or email [email protected] Efficiency : 21.0%

• Adjustable, Corrosion-Resistant aluminum stand as well as a heavy duty handle and latches for longevity. Folded size: 19. 9 x 27. 2 x 2. 8 inches. Ideal output: 500 Watt hours per day (depends on sunlight availability)
• Compatible with gel, sealed, Lithium, and flooded batteries. Charge controller with LCD display for displaying operating Information and data
• 20A built-in 5-stage Solar charge controller provides overcharge protection, reducing Fire risk.Operating Temperature: -40°F to +185°F
• Negative-ground charge controller for compatibility with your RV, boat, trailer, etc.
• The low-voltage system avoids electric shock hazards

User questions & answers

Question:	My house battery is too hard to get to for alligator clips. What would I need to hard wire this system to my battery
Answer:	I got this extension cable: https://www.amazon.com/Go-Power-GP-PSK-X30-Expansion-Accessory/dp/B00FYV4DU8 And I got this accessory: https://www.amazon.com/Go-Power-Trailer-Accessory-Portable/dp/B00FYUCQXK, to which I added the appropriate quick-connector. The 30’ cable coils up inside the back of one panel when folded, I keep the 7-way hookup accessory in a little bag with other accessories. I simply set up the panel somewhere within 30’ of the front of my trailer and plug it into the 7-way coming from the trailer. Works like a dream to keep my LiFePO4 battery charged up, even on less than perfectly sunny days! No need to alligator-clip it to battery under the couch in my trailer. I did get a charge controller from Zamp Solar, because Renogy’s did not support lithium batteries at the time.
Question:	Can i add more pannesls
Answer:	I assume you are asking if the included charge controller can manage additional panels? If you are looking to add panels in parallel (maintaining the nominal 12V output while increasing amperage), my answer would be, "not recommended." This controller is rated at 10 amps. At full 100 watt output, it is operating at around 7 amps, so there's not much additional capacity. If you plan to add panels, I would suggest ordering the kit without the controller, then add a higher capacity controller such as this 30 amp model...http://www.amazon.com/RENOGY%C2%AE-ViewStar-Negative-grounded-Controller/dp/B00LG0DAQO/ref=sr_1_2?s=lawn-garden&ie=UTF8&qid=1428654662&sr=1-2&keywords=viewstar It will require some know-how and additional wiring to properly set up.
Question:	Anybody know how long you can run the batter/power cable...? I'm thinking from the top of an RV to the ground +/- 12-15'. Thank you in advance
Answer:	With 10AWG wire between your controller and battery, 30' of wire will give you 3% drop. Only 15' of wire could be used if you add a panel and have 200W of PV power. That's not the best practice though. Best would be to use an MPPT controller connected as close to the battery as possible. You would then be able to use 55' of 10 guage wire between the controller and panel, or 110' if you double your voltage by adding another 100 watt panel in series.
Question:	What is a good extension cord to buy with this for more mobility from my RV
Answer:	There is a lot of wrong and misleading info you're getting here... It primarily depends on your controller. If you have a garbage (PWM) controller, then 25' of 10AWG wire is your max. That puts you at 3% voltage drop. If you have an MPPT controller, you can go 55' with 10AWG wire. Now, here's the kicker, and the reason nobody should be buying these crappy PWM controllers; If you add another 100W panel in series to your MPPT controller, you can now use 110 feet of wire, and your voltage drop will still be 3% because you're doubling your voltage. If you add a panel to a PWM controller, you'll have to cut your wire length in half. DO NOT BUY PWM controllers!!!

Product features

Solar Suitcase

The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. This suitcase includes two fully waterproof(IP66) 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller, one tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability.

The negative-ground charge controller is compatible with RV, boat, trailer, etc.

Package Includes

• Composed with two 50 Watt Monocrystalline Solar Panels. The low-voltage system avoids electrical shock hazards.

• Adjustable, corrosion-resistant aluminum stand.

• Heavy duty handle and latches for longevity protective casing.

Package Includes

• 12V/ 24V Battery compatibility with auto recognition
• Smart 4 stage PWM charge Controller: bulk, Absorption. Float, and equalization.
• 4 Battery Type compatible – sealed/AGM, gel, Flooded, and lithium batteries (with Lithium awakening feature)
• Watertight design with backlit LCD display for system information and error codes.
• Multiple Protection features for battery, controller, and Solar panels (including reverse polarity and more)

Package Includes

MC4 to Alligator Clips w/ Fuse

Used for connecting the charge controller to the battery.

The entire cable from the charge controller to the alligator clips measures 9.9 feet with an inline fuse of 10A.

Product description

Renogy RV Tilt Mount Brackets allow for the mounting of Renogy 100W panels to the rooftop of a vehicle or other flat surface. Designed for off-grid systems, these solar panel mounts are easily adjustable and feature stainless steel fasteners. Suitable for any flat surface, this solar mounting system helps to optimize performance by tilt-positioning the solar panels while stationary, and then repositioning to flat while the vehicle is in the motion.

• Adjustable solar panel mounting brackets designed for off-grid solar systems.
• Quick assembly with stainless steel fasteners and precise hole placement.
• Great addition for use on top of an RV or other flat surface.
• Compatible with Renogy Solar Panels under 100W.
• Package Includes: Four Fixed L-Brackets, Two Tilt L-Brackets, Six M8 Plastic Knob Screws, Six M8 Wing Nuts, Four M6 x 16mm Hex Cap Bolts, Four M6 Split Lock Washers, Eight M6 Flat Washers, Four M6 Hexagonal Nuts, Six M8 Washers, Six M8 Spring Washers, Six #10 x 1¼ in Self-Drilling Cap Screws, Six Plastic Retaining Rings

User questions & answers

Question:	Are the brackets made of stainless steel
Answer:	the brackets are aluminum and the fasteners are stainless steel
Question:	Why can't I order more than 8 of these? I'd like to use them to optimize the panel angles on my small home rooftop system - 8 isn't enough
Answer:	I don't know, check with Amazon.
Question:	Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts
Answer:	All mounting parts were included in mine.
Question:	Can they be tilted while driving
Answer:	As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue. Think about the speed you travel (i.e. 70 mph) and add into that a headwind of 30 mph (plus gusts), you have a combined wind resistance of 100+ mph. Besides the strain on the fasteners and bracket, you would have a hell of a drag impacting your fuel consumption. In short, keep EVERYTHING as low as possible when driving. Reduced drag improves mileage and minimizes the strain on whatever you attach as well as minimizes fuel economy impact.

Product features

Renogy Adjustable Tilt Mount Brackets

• Adjustable solar panel mounting brackets designed for off-grid solar system
• Great addition for use on top of an RV or other flat surface
• Compatible with Renogy Solar Panels under 100W
• Quick assembly with stainless steel fasteners and precise hole placement

Step 1

Install fix bracket to the surface for installation

Step 2

Install fix bracket to the solar panel

Step 3

Connect two fix brackets with tilt bracket to desire angle