3 best permanent home generators

Permanent home generators, often referred to as standby generators, are a type of backup power solution designed to provide continuous electrical power to a home during power outages or emergencies.These generators are permanently installed on the property and are capable of automatically starting and providing electricity when the main power supply fails. Here's what you need to know about permanent home generators:

Automatic Operation: One of the primary features of permanent home generators is their automatic operation. They are connected to the home's electrical system and come equipped with an automatic transfer switch. When a power outage occurs, the generator detects it and starts automatically, ensuring uninterrupted power supply to the home.
Fuel Source: Permanent home generators typically run on various fuel sources, including natural gas, propane, or diesel. The choice of fuel source depends on the homeowner's preference and availability in their area.
Capacity: These generators come in different capacities, ranging from small units that can power essential circuits to larger units capable of providing electricity to the entire home. The capacity choice depends on the homeowner's specific needs and budget.
Weatherproof Enclosure: Permanent home generators are housed in weatherproof enclosures, ensuring protection from the elements and extending their lifespan. The enclosures are often designed to be aesthetically pleasing and blend into the landscape.
Remote Monitoring: Many modern permanent generators come with remote monitoring capabilities, allowing homeowners to check the generator's status, fuel levels, and performance remotely via a mobile app or web interface.
Noise Levels: Some models are designed with reduced noise levels to minimize disruption to the homeowner and neighbors during operation. This is particularly important for generators that run for extended periods during power outages.
Safety Features: Permanent home generators include safety features such as automatic shutdown in case of low oil levels, overloads, or other issues to protect the generator and prevent damage.
Installation: The installation of a permanent home generator is typically carried out by a licensed electrician or generator installer. Proper installation is crucial to ensure the generator operates safely and effectively.
Cost: The cost of a permanent home generator can vary significantly depending on its capacity, features, and fuel source. It includes not only the generator itself but also installation costs, fuel connections, and any necessary permits.
Maintenance: Regular maintenance is essential to keep the generator in good working condition. This includes periodic checks, oil and filter changes, and system tests. Many generator manufacturers offer maintenance plans.

Permanent home generators provide peace of mind for homeowners by ensuring that essential appliances and systems, such as refrigeration, heating, cooling, and medical equipment, remain operational during power outages. They are particularly valuable in regions prone to severe weather events or frequent power disruptions.

Below you can find our editor's choice of the best permanent home generators on the market

Pikasola Wind Turbine Generator 400W 12V with 3 Blade 2.5m/s Low Wind Speed Starting Wind Turbines with Charge Controller, Windmill for Home

Based on 12 reviews Check latest price

★ Feature: Starting with low speed; high wind energy utilization; low vibration on operation, high efficiency.
★ Wind Blade: 23.4inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight.
★ Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The wind generator is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage
★Rotating Body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.
★Real Parameter, Not False: Our product parameters are Real & Actual, not False. Base on designed after repeated experimental testing. Wind turbine parameters can be customized, please contact us if you have requirement.

User questions & answers

Question:	What is the rpm when generating 400w
Answer:	not sure but it takes around 32mph straight clean wind.
Question:	does my pikasola 400w wind turbine have to be welded for pole mount? or does it use nesting or reducing joint seen in some pictured
Answer:	it has a built in clamp feature with a rubber bushing. It fits on a 2" OD pipe. No need for welding.
Question:	My turbine doesn't put out anywhere near 400 watts at high winds. the most i've seen is 50-100 watts. all connections are solid too. any suggestions
Answer:	I'm in your position also. Disappointed.
Question:	What is the wire guage size
Answer:	The guage varies based on length. See their guide. I used 12. Additionally, if you are planning on their lantern type turbine.....I would note the number of poor scores from other folks. I wished I had seen the reviews before I purchased mine.

Product features

Specifications:

Rated power:400 W

Maximum power:410 W

Number of blades:3

Rated voltage:12 V

Start-up wind speed:2.5 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Wind wheel diameter: 51.18 inch

High efficiency

1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.

3.The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.

4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

High quality

1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.

2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.

Easy installation

1． Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.

2． The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3． Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Feature:

1. Starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.

2.Being installed by human design and easy for installation, maintenance and repair.

3.Being molded through precise injection with new process, together with the optimized design of aerodynamic contour and structure, our wind turbine blades have such advantages: high utilization of wind energy which contributes to the annual energy output.

4.Our generators, adopting patented permanent magnet rotor alternator, with a special kind of stater design, efficiently decrease resistance torque of the generators.

Marsrock 600r/m 100W 12V or 24V Permanent Magnet Generator AC Alternator for Vertical or Horizontal Wind Turbine 100W Wind Generator (24V)

Based on 2 reviews Check latest price

Product description

Model Number:G100S

Type:Wind Power Generator

Rated Power:100W

Max Power:130WRated

Voltage:24V

Rotate Speed:600r/m

Net Weight:3kg

Gross Weight:3.5kg

Output Current :AC

Start Torque: 0.12Nm

generator :3 phase permanent magnet synchronous generator

Insulation Class: F

Service Life: More Than 20 years

Bearing :HRB

Shaft Material :stainless steel

Shell Material :aluminium alloy

Permanent Magnet Material: Rare Earth NdFeB

Protection Grade: IP54

Lubrication Lubrication: Grease

Working temperature :-40℃ - 80 ℃

What kind of region can be installed wind turbine?

Small wind turbines should be applied in the regions which wind resources is sufficient. The annual average wind speed should be more than 3m/s, the effective wind speed 3-20m/s should be more than 3000h in accumulation per year. The density of 3-20m/s effectively average wind power should be more than 100W/m2.

It should be noted that choosing the rated design speed wind turbine is in conformity with local design speed. It is significantly in making use of wind resources and in economic aspect. Wind tunnel test proves that the fan power transformation of the impeller in the direct ratio with wind speed, that is to say, the wind speed decide the output electrical power.

With the best NdFeB Permanent Magnet, high-grade pure copper winding, the generator can product power stably and high efficiently.
Specially-designed rotor and rotator, low resistance moment in start-up, good at cooling.
Gearless, direct -drive, and low rev rare earth Permanent Magnet Generator, easy and safe for operating and maintenance.
Die casting aluminum alloy case, anti- corrosion, acid and alkali resistant, anti salt corrosion.
Package Size: 21cm x 21cm x 15cm (8.27in x 8.27in x 5.91in); Package Weight: 3.7kg (8.16lb.).

User questions & answers

Question:	How does this mount to a pole
Answer:	The probe without handle is 4.5" long. The cable is 4' long.
Question:	what is the number of poles
Answer:	Mine is a bit over 6 feet ,counting probe.
Question:	what are the 3 cords for
Answer:	We recommend the maximum operational temperature to be below 572°F
Question:	Is this waterproof
Answer:	I don't think so. It's similar in function to electrician's tape, but it sticks itself, making a tight bond that, in my opinion, holds better than electrician's tape. So think in terms of what you'd use electrician's tape for. For a pipe you might try something like JB Weld.

Briggs & Stratton 40325 10,000 Watt Natural Gas/Liquid Propane Powered Air Cooled Home Standby Generator

Briggs & Stratton

Check latest price

Product description

The new streamlined Briggs & Stratton 10,000 watt Home Generator System meets the power needs of your whole house, with a smaller, more affordable unit. Briggs & Stratton automatic home generators provide permanent, backup protection from power outages for your home, and your family.

Patented air conditioning control module for electronically managing up to two 3 ton AC units with Briggs & Stratton transfer switch.
Maximum Fuel Economy: Intelligent management of your homes appliances results in less fuel consumption than larger,more fuel hungry generators.
Computer-Friendly Power: Advanced alternator technology provides safe and stable power for computers and other sensitive electronics.
The new Enclosure can be placed within 20 inches of your home's exterior as long as your local codes are met.
3 Year Parts and Labor Limited Warranty

User questions & answers

Question:	What is the propane fuel usage per hour
Answer:	They are designed for curved steps and are a bit more expensive than those made for straight edge steps, so I'd suggest not buying these if you need straight edged rugs. They have springs to tension them from below, so they might work for straight edges but why spend the extra couple of bucks?
Question:	Does this generator need special wiring hook up propane and/or power box
Answer:	I have used them in all kinds of weather, and as far as ice they will help in preventing slippage somewhat as long a you step slowly and carefully
Question:	What is the output voltage of this unit
Answer:	There are 3 step covers per package! Used on my 3 steps of my 5th wheel trailer!
Question:	does this model include the transfer switch
Answer:	They are for rounded steps.