8 best outdoor generator accessories

• Generator Power Inlet Box: Power inlet box is an outdoor/watertight electrical inlet for a 50 Amp SS2-50 generator cord. 125/250V, 12500W. It is designed to be installed outdoors in an open area where the generator is being used and perfect for backup power during a power outage.
• Safety Assurance: It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. Our generator power inlet box passed the certifications of ETL.
• Best Space Design & Easy to Install: Compared with ordinary boxes, we have increased the wiring space by 50%. There are generous wiring space and facilitates through-in. The front of the box is removable for easy placement and wiring.
• Weatherproof & Anty-rust: The front entry inlet has a weatherproof spring cover which closes when not in use to protect the inlet from the elements. The surface of the power inlet box with anti-corrosive powder-coat paint which can resist weather damage like rain, UV, will not rust.
• Green Light Indication: New upgraded version provide a Green Power Indicator. There will be on a green light on the flip lid when plugging into the generator cord and powering on the generator. It gives a visibly clear indication when it is working and inlet is ready to use, which provides optimum performance and added safety.

User questions & answers

Question:	So this has a ground (green) from the plug to the box. So do i not have to run a ground to my ground bar in my panel
Answer:	Did you measure the opening when in the locked position? In the maximum locked position, it is assumed there will be a full thread length in the handle screw adjustment section - if you adjust past having a full thread purchase the tool may fail. I think it would be dumb to use such a small tool on any material that wide. The answer is 1 1/8" in the locked position at the tip of the jaws - note the jaws would not be parallel and the lower point of the jaw spread would be smaller at about 7/8".
Question:	Can this be used if using the 50 amp 4 prong plug on the generator? Or would I need a 4 prong inlet box
Answer:	Yes made in the USA and the best pair you'll find mine are great I use them every day
Question:	Is the twist and lock generator cord compatible to this inlet
Answer:	Yes, I am very satisfied with its conductive effect when I work with locking pliers, and the surface of the vise is frosted so that it will not stick to things during use, you can use it safely.Good luck!
Question:	How to punching the hole in the Knockout
Answer:	The locking pliers with wire cutter is made of CR-V material,with high hardness,not easy to wear and with a rubber handle,which is anti-skid and wear-resistant.The lever principle design is adopted,so the working process is very labor-saving.

• 【Generator Power Inlet Box】Power inlet box is an outdoor/watertight electrical inlet for a 50 Amp SS2-50 generator cord. 125/250V, 12500W. It is designed to be installed outdoors in an open area where the generator is being used and perfect for backup power during a power outage.
• 【Safety Assurance & ETL Certificate】It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. Our generator power inlet box passed the certifications of ETL.
• 【Best Space Design & Easy to Install】Compared with ordinary boxes, we have increased the wiring space by 50%. There are generous wiring space and facilitates through-in. The front of the box is removable for easy placement and wiring.
• 【Weatherproof & Anty-rust】The front entry inlet has a weatherproof spring cover which closes when not in use to protect the inlet from the elements. The surface of the power inlet box with anti-corrosive powder-coat paint which can resist weather damage like rain, UV, will not rust.
• 【Green Light Indication】New upgraded version provide a Green Power Indicator. There will be on a green light on the flip lid when plugging into the generator cord and powering on the generator. It gives a visibly clear indication when it is working and inlet is ready to use, which provides optimum performance and added safety.

User questions & answers

Question:	How much watt is the maximum working power of the Power Inlet Box
Answer:	Throat depth is 78mm, max jaw opening is 93mm
Question:	Can the item be used on generators when there's no other power supply
Answer:	Made in China
Question:	hi, what is the size of the product
Answer:	The wire cutting jaws are located behind the gripping jaws. They are only about 3/8" long and meant for cutting small (#10 gauge or less) wires. If you are cutting only electrical (copper) wires, buy yourself a quality pair of electrical pliers that will last your lifetime when used correctly (no cutting stainless or other hard wires). Irwin changed the excellent original Vice Grip to a clumsy, heavier, not quite piece of junk.
Question:	Is the installation hard to accomplish
Answer:	The country of origin for the Irwin 5WR-3 is China.

Product features

50 Amp Generator Power Inlet Box

• It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house.

• This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. Our generator power inlet box passed the certifications of ETL.

Outdoor Generator Inlet Box

50 amp power inlet box NEMA SS2-50P plug is the preferred accessory for backup power supply.

3 fixing Holes

You can use these holes to select suitable position to install the power outlet box, and it will be more easy for you to install the box with these holes.

SPECIAL NOTE

Four knockouts located on the inlet in following- left, right, bottom, & back. For waterproofing purposes they are not penetrated and will need to be to drill through!!! Recommend use a Step Drill Bit or Hole Cutter to drill through them.

Hight Quality Material

Made of 1.5mm thick iron, very strong, not easy to deform when used outdoors. The surface of box with anti-corrosive powder-coat paint which can resist weather damage like rain, UV, will not rust.

Anti-rust Coating

The anti-rust coating design and flip design can easily resist any bad weather, including wind, rain, dust, blizzard, etc.! Provide safe and stable protection for your generator power supply!

Green Safety Light

There is a clear green warning light on the flip cover, which will be lit when the power connection is successful; You can see a clearly visible green light indicator when working thus providing the best performance and higher security!

Product description

The Champion 100395 250-Volt Generator Power Cord extends 30 amps of power up to 25 feet, providing power where you need it most - your home. When you need to bring the power from your generator into your home so you can use essential items during an emergency, depend on Champion’s 25-foot generator power cord. This power cord provides a safe and convenient way to connect your generator to the manual transfer switch on your home, providing the convenience of utility power and eliminating the need to run extension cords throughout the house. Use this cord with portable generators rated for 30 amps that feature an L14-30 receptacle. The male end of the cord plugs into your generator, while the female end connects to a transfer switch with L14-30 connection. Consulting a certified electrician on the proper installation and use of a manual transfer switch is highly recommended. Ideal for quick and dependable use of power, this 25-foot, high-capacity 10-gauge wire is surrounded by durable, outdoor-rated insulation (SJTW). Featuring a heat and cold resistant thermoplastic jacket, you can be sure your power cord will remain flexible and function perfectly whether the temperature outside is extremely hot or extremely cold. Champion’s convenient generator cord is rated for use with 125/250-volts and extends 30 amps of generator power to your home. The 25-foot long cord allows you to run your generator from a safe distance, protecting you and others from noise and hazardous exhaust. Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and FREE lifetime technical support.

• Powerful – Connect the locking outlet on your generator to the manual transfer switch on your home and extend up to 30 amps of power
• Flexible – The cold and heat resistant 25-foot, 10-gauge wire stays flexible in extreme temperatures and is rated for 250-volt use
• Weather Resistant – Service grade, abrasion and weather-resistant SJTW insulation
• Safe – Extend your power up to 25 feet away, protecting you and others from hazardous generator exhaust
• Reliable – Champion Support includes 1-year limited warranty with FREE lifetime technical support from dedicated experts

User questions & answers

Question:	Can this cord be used in the rain
Answer:	This seat fits only John Deere mowers. Please check the bolt pattern before ordering. Unfortunately we do not offer seat for exact your model.
Question:	Does this cord provide fused/breaker 15 amp protection on each of the 3 outlets
Answer:	I was under the impression this replacement seat was out of stock and not available.
Question:	Is this cord UL listed
Answer:	Hello AnthonyThank you for your email This seat should work for your L130 as its listed as fitting.You can compare the bolt mounting pattern on our Amazon Listing just to see if it matches yoursbest regardsRick
Question:	The product information says (l5-30p to three 5-20r) but the second picture on the left says l5-30r? description is confusing.i need it to be l5-30r
Answer:	Mine was shipped by Amazon's Smiley trucks (not FedEx or UPS or even the USPS) so it doesn't indicate a return address; therefore I don't know where it actually was shipped from. It was in a lightweight cardboard box inside a larger bubble wrapped lined envelope... That seemed good enough to protect it from shipping damage... I got mine in September of 2019 so I can only speak to the one occurrence from 16 months ago... If you order again I hope your experience matches mine.

Product features

Champion 25-Foot 30-Amp 250-Volt Generator Power Cord for Manual Transfer Switch (L14-30P to L14-30R)

Extend 30 amps of power up to 25 feet with Champion’s convenient generator cord. Connect your portable generator to the transfer switch on your home to easily and safely provide power where you need it most. Resistant to extreme heat or cold, this cord stays flexible so it’s ready when you are.

We make the power that makes your life easier.

Accessories

From power cords to wheel kits and everything in between, count on Champion to provide a wide range of accessories to ensure you get the most out of all your Champion products.

Product description

The Reliance Controls LL550C 50-Amp CS6364 Generator Power Connector Cord Connector is a reliable, heavy-duty connector for a variety of applications involving the necessary power. Since 1909, Reliance Controls Corporation has contributed more innovations than any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

The Reliance Controls 50 Amp connector is a heavy-duty power cable plug for use with Reliance generators up to 12,500 watts. The NEMA L14-30 connector is cUL listed. It is covered by a 5-year warranty.

• Female power cord connector
• Designed specifically for generators up to 12,500 maximum running watts
• Constructed with a heavy-duty design
• Maximum generator input: 50A @ 125/250 VAC
• Mostly black in color

User questions & answers

Question:	My generator out put is 120/240v 30a locking outlet but i need to plug into 50amp transfer switch. can i just attach this to a 30 amp cord
Answer:	These will lock onto your lid if there is a tab . Channellock pliers may be a better way to go as they will grab and you can turn .
Question:	when my item will be shipped
Answer:	I'm not an Irwin rep or anything, but from what I can tell, the 4WR means it's a 4" General Purpose Curved Jaw type. The general purpose pliers have a wire cutter in the jaw, as opposed to some of their other models which don't have one. The 4" model is quite small ... handy for keeping in your briefcase or pocket and useful for getting at small hardware in tight places, but if you're looking for a standard sized set of vice grip pliers, this isn't it.
Question:	What material is the center ground pin made of? It seems prone to corrosion
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service. No. All vise grip products are manufactured in China.
Question:	What type of cable is required to use with this connector
Answer:	Jaw length is 2 3/16 inches and jaw thickness is 4.8mm

Product features

Reliance Controls LL550C 50 Amp Generator Connector (Female), Black

The Reliance Controls LL550C 50 Amp Generator Connector is perfect for replacing a worn-out connector or putting together a completely new generator cord. This 4-Wire product is UL Listed and has a twist lock design for optimal safety, handles 50 Amp at 125/250 V. In the event of a power outage, use this to connect a generator to the transfer switch in your house, or to your RV when you take that trip to the great outdoors.

What You Should Know

• Works well with the rain tight NEMA 3R PBN-Series steel power inlet box
  • The locking mechanism and weatherproof spring cover helps capitalize on safety in the outdoors
  • PBN20, PBN30, PBN50 Non-Metallic Inlet Boxes
• 3-Pole, 4-Wire plug for higher voltage outlets and appliances
  • Always unplug when not in use
• Great for power outage and severe weather preparation
• Simple Set-up with Instructions

Product description

The reliance controls 20 foot 30 amp outdoor rated generator power cord has NEMA L14-30 molded & watertight plug & Connector ends. It is designed to provide a power connection between your generator & either an outdoor power inlet box or a transfer switch or panel. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer & has been awarded over 85 patents on manual transfer switches, time switches & accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks & controls, generator accessories, transfer switches & transfer panels for portable generators & inverters. & after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering & exceptional customer service.

The Reliance Controls 20-foot 30 Amp power cord is designed for use with Reliance manual transfer switches, transfer panels, and power inlet boxes. This heavy-duty power cord features 10-gauge, 4-wire, NEMA L14-30 plug and connector ends. It is UL listed and covered by a 5-year warranty.

• Heavy-duty, 20-foot product
• Perfect for connecting a generator and a transfer switch with a single cord
• Sets with molded ends
• Designed for use with reliance Manual transfer switches, transfer panels and power inlet boxes
• UL listed

User questions & answers

Question:	Where is the Reliance PC3020 Generator power cord manufactured
Answer:	Not sure where you're buying NB socks for $20, but yeah, these are new balance.
Question:	Is power cord included
Answer:	There isn't a seperate piece of fabric inside to seperate your balls from your legs. It does have good front room for your entire manhood more so than most other brands.
Question:	I have a champion 9000 watt generator with a reliance 10 circuit that give me 8000 watts transfer will this cord will work with it
Answer:	Yes they have a opening in the front to use
Question:	is wire copper
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service. No. All vise grip products are manufactured in China.

Product features

Reliance Controls PC3020K Generator Power Cord, Black

Reliance Controls PC3020K Generator Power Cord, Black is perfect for use with most generators whether it's for emergency preparedness or traveling with a generator. This 4-Pole, 4-Wire, 20-foot product is UL Listed and has a twist lock design for optimal safety, handles 30 Amp at 125/250 V. In the event of a power outage, connect it to the transfer switch in your house, or connect it to your RV when you take that trip to the great outdoors.

What You Should Know

• Works well with the rain tight NEMA 3R PBN-Series steel power inlet box
  • The locking mechanism and weatherproof spring cover helps capitalize on safety in the outdoors
  • PBN20, PBN30, PBN50 Non-Metallic Inlet Boxes
  • 4-Pole, 4-Wire, 20-Foot generator cord for higher voltage outlets and appliances
• Always unplug when not in use
• Great for power outage and severe weather preparation

Product description

The Champion Power Equipment C90011 Weather-Resistant Storage Cover is designed to fit your 2800 to 4750-watt generator to keep it safe, clean and dry. Whether your generator is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your generator, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your generator and its engine. Champion’s versatile cover also fits generators up to 25 x 23.6 x 20.3-inches in size. This cover is not designed to fit over wheels. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your generator and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your generator and prevent scuff marks and scratches. Protect your valuable Champion generator year round with Champion’s complete selection of generator covers including 1200-1875-watt and 4800-11,500-watt sizes. Buy with confidence – Champion Support will back up your purchase with a 1-year limited warranty.

• Weather Resistant – Protect your generator from sun and UV damage, rain, snow, dirt and more with this cover’s tough vinyl exterior
• Secure – The strong elastic base provides a secure, custom-like fit for your generator
• Versatile – This cover is designed for 2800-4750-watt generators, but will also fit generators up to 25 x 23.6 x 20.3-inches in size
• Quick – The durable cover fits over your generator quickly to protect it while in storage
• Reliable – Champion Support includes 1-year limited warranty

User questions & answers

Question:	does it fit champion 9200 generator
Answer:	I’ve used it on a craftsman
Question:	Will it fit westighouse
Answer:	Is it a horizontal shaft ?
Question:	Amazon is recommending this cover for the champion model 76533 4750 watt duel fuel generator i just purchased. is that correct? width looks too small
Answer:	The pull cord diameter is 4.0mm
Question:	Would this cover stay in place when traveling in the back of a pickup truck or would the wind pull if off
Answer:	Yes it is a all complete pull starter cap. It fit my unit with no issues & is still working to this day better than the original.

Product features

Champion Weather-Resistant Storage Cover for 2800-4750-Watt Portable Generators

Champion’s storage cover for 2800 to 4750-watt portable generators offers an elastic base, providing a secure, custom-like fit. The weather-resistant vinyl exterior keeps your generator in top condition while protecting it from sun and UV damage, rain, snow, debris, tree sap, and more.

We make the power that makes your life easier.

Accessories

From power cords to wheel kits and everything in between, count on Champion to provide a wide range of accessories to ensure you get the most out of all your Champion products.

• 【ETL Listed】 High quality and safety approved by ETL association, NEMA L14-30P, 30 Amp, 125/250 Volts, 3750/7500 Watts power inlet box, use for 30 Amp generator.
• 【Green Status Light】 When turn on the generator and plugged into our power box, Green Status Light on the Cover will turn on.
• 【4 WAYS CONNECTION】 1.2inch diameter knockouts on left, right, bottom and back, suggest use 4-8 AWG wire, you may need tools like knockout punch set, hammer, screwdriver, hole saw, drill etc.
• Metal Weatherproof Shell】 Strong metal body and durable flip plastic cover designed for outdoor use, anti-corrosion and anti-fading waterproof construction, adapt to sun, rain, snow weather.
• 【YOU NEED TO KNOW】 It is designed outdoor use to prevent generator engine noise, carbon monoxide fumes entering your house, generator transmit electricity to our inlet box to make sure our home appliance can working during a power outage, what's a perfect backup. ATTENTION: If you can't handle, for your safety, please install with electrician who have license better or contact us for help.

Product features

Easy install on wall or other place

Strong screw thread, connect well

Enough room for wiring, weatherproof design, strong body

Product description

Protect your FIRMAN Generator from the roughest of elements with your FIRMAN Generator cover. Your FIRMAN Generator cover is durable, water resistant, and made of heavy duty vinyl to protect your generator in the toughest of conditions. Keeps your generator safe from rain, snow, UV rays, dust storms, damaging scratches, and other elements of outdoor life.

• Fits the Medium Wattage Generators 3000 – 4900 Watts or up to 25. 4” X 18. 3” X 19. 5”
• Double insulated
• Durable exterior finish built to last for years
• Easy to install
• Powerful, durable pull cord to keep your cover secure even in windy conditions

User questions & answers

Question:	Does this fit the Firman H03651 generator
Answer:	These boxer briefs are packaged by Hanes as and sold in a five-pack. Different sellers use different terms when listing things in their own systems. This is all well and good, until inventories get uploaded and Amazon assumes they're different things.
Question:	is this item waterproof or just water resistant
Answer:	Yes. But these were nothing but holes within a month or so. I don’t know if we got a bad batch, or what, but these were garbage.
Question:	Will this fit a 3650/4550 Firman
Answer:	Yes they are. But that is not the fault of the Vietnamese. Hanes is responsible for quality control. The quality of these was OK but the fabric seems to be getting thinner and thinner each time I purchase them. I would rather pay more for thicker cotton. I may switch to another brand if the cotton gets any thinner.
Question:	the specs say up to 25" and my firman, model p03601 for amazon, and p03608 for costco, is 27". it should fit, but does it? all other spec match
Answer:	The mesh is woven tightly, not what you typically think of mesh.