14 best irrigation heads
Irrigation heads, also known as sprinkler heads, are an essential component of automatic irrigation systems used in gardening, lawn care, and landscaping. These devices are responsible for distributing water evenly across a specified area, ensuring that plants, grass, and other vegetation receive the appropriate amount of moisture. Here's what you should know about irrigation heads:
Types of Irrigation Heads:
- Rotary Sprinkler Heads: These heads have rotating nozzles that distribute water in a circular or semi-circular pattern. They are suitable for larger areas and are often used for watering lawns.
- Fixed Spray Heads: Fixed spray heads emit water in a fixed, stationary pattern. They are ideal for smaller, more precise areas like flower beds and shrubbery.
- Pop-Up Sprinkler Heads: Pop-up sprinkler heads are designed to rise above ground when activated and retract when not in use. This design helps protect them from lawnmowers and foot traffic.
- Drip Emitters: Drip irrigation heads release water slowly, drop by drop, directly to the base of plants. They are highly efficient and conserve water.
Adjustability: Many irrigation heads are adjustable, allowing you to control the radius and flow rate of water distribution. This flexibility enables you to customize irrigation to match the needs of different plants and areas.
Coverage Area: The choice of irrigation head should be based on the size and shape of the area you need to water.Rotary sprinklers are suitable for larger, open spaces, while fixed spray heads are better for narrower, targeted areas.
Pressure and Flow Rate: It's important to match the irrigation head's pressure and flow rate requirements with your irrigation system's capabilities to ensure proper functioning.
Zoning: In larger irrigation systems, multiple irrigation heads may be organized into zones. Each zone can be programmed separately, allowing you to water different areas at different times and durations, optimizing water distribution.
Maintenance: Regular maintenance, including cleaning and checking for clogs or damage, is essential to keep irrigation heads functioning correctly. Debris or mineral buildup can affect their performance.
Rain Sensors: Some modern irrigation systems are equipped with rain sensors that can detect rainfall and automatically adjust or suspend watering to avoid overwatering.
Efficiency and Water Conservation: Using the right type of irrigation head and optimizing its settings can help conserve water, reduce runoff, and promote healthy plant growth.
Irrigation heads are a crucial part of automated watering systems, helping homeowners and gardeners efficiently manage the hydration needs of their landscapes. Proper selection, placement, and maintenance of irrigation heads are essential for achieving a healthy and vibrant garden or lawn while conserving water resources.
Below you can find our editor's choice of the best irrigation heads on the market
Axe Sickle Set of 50 Drip Emitters Perfect for 4mm / 7mm Tube, Adjustable 360 Degree Water Flow Drip Irrigation System for Watering System.
- Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.
- Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.
- Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...
- Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money.
- 50 PCS: All Axe Sickle products are fulfilled by Amazon with 100% guarantee fast shipment and good customer service.
User questions & answers
| Question: | what is the range of flow rate per hour for this |
| Answer: | Wish I could help. The top is a knob that adjusts flow from zero to wide open sprinkler. Some of these I have as a sprinkles as in the pic, some I have reduced back to a slow drip. I run one area for 30 minutes and probably water each plant 1-2 gallons at flow more than the slow drip. You might get 5 gal in an hour at full flow. Hope that helps. These are really great heads but you do have to heat the 1/4” tube to connect them. |
| Question: | How many heads can be installed on a single 1/2 inch line |
| Answer: | I have nearly 50 of these on a single 1/2" but extended using 1/4" tubing. The more I added the less pressure and now some of them don't emit any water. I am about to run another 1/2 line to get the pressure back. |
| Question: | Can I use this in a gravity feed drip irrigation system or does it have to have a certain psi to sprinkle |
| Answer: | Think you need psi but if your gravity feed is high enough it might work. 😊Suggest you go to Lowe’s or Home Depot and buy one as a tester |
| Question: | I'm ording drip system for the first time. I plan on using 1/4" mainline, will these connect directly into the mainline |
| Answer: | 1/4" drip line will push right onto these. I would not connect more than 3 or 4 of these on a 1/4" line, it wont flow enough water. I use 3/4" PVC for main line with 8 port distribution heads to connect to the 1/4 drip line. Hint- warm up the 1/4 line in hot water to make the line easier to push on. Hope that helps |
Product features
360 Degree Adjustable Wate Flow Irrigation Drippers,Each drip head has an adjustable cap that allows for simultaneous control of the flow rate and the wetting area.
These drippers are very useful in residential gardens for an individual plant or group of plants, or for ground covers, shrubs.Perfect for the irrigation of your flower, plants, lawn.Suitable for pots, tubs, ground cover, landscaped gardens and Etc... The adjustable eight hole drip head offers a convenient way to water areas where conventional sprinkler systems are not suitable.
K-Rain Pro-S 4" Professional Pop-Up Sprays- 6Pack w. 15' Adjustable Pattern Nozzles(0°-360°)
Product description
K-Rain's Professional Series 4 in. pop-up (height) spray ---- Patented Co-molded wiper seal-ensures a leak free full pop up operation, even under low-pressure situations, cartridge design allows for easy removal and cleaning ---- Treated with UV inhibitors for long life, seal is microbe resistant to reduce degradation and stick-ups ---- Accepts female threaded nozzles ---- Ratcheting riser-permits quick, easy alignment of spray pattern ---- Heavy-duty retraction spring -strongest spring in the industry- for ensured retraction in all soil conditions
- Water Saving, Easy to use, fast, durable, reliable
User questions & answers
| Question: | My Sprinkler head has a male insert unlike the female inserts on this item. Is there a converter |
| Answer: | yes, male to female any size |
| Question: | Are these 1/2" inlet |
| Answer: | Yes |
| Question: | Can the distance be adjusted |
| Answer: | Tip You can also use a flat-head screwdriver to adjust the arc and distance screws. How to Set the Distance: Find the smaller screw located within the left start arrow on the top of the sprinkler head. If your model does not have a smaller screw at the top of the sprinkler head, locate the screw above the spray nozzle on the side of the turret. Using the K-key or a small flat head screwdriver, rotate the screw to the right to reduce the spray distance or to the left to increase the spray distance. Warning When adjusting the arc, do not turn the arrow lower than the 30-degree setting or higher than the 360-degree setting to avoid damaging the sprinkler head. |
| Question: | how do I get a pop up head to stop working |
| Answer: | Turn the water supply off! |
5000 Series Rotor Sprinkler Head - 5004 PC Model, Adjustable 40-360 Degree Part-Circle, 4 Inch Pop-Up Lawn Sprayer Irrigation System - 25 to 50 Feet Water Spray Distance (Y54007) (20 Pack Case)
Rain-bird
Product description
RAINBIRD Y54007 RAINBIRD SPRINKLER HEAD – KEEPS YOUR LAWN IN TIP-TOP CONDITION!
Looking for a sprinkler which you can use to keep your garden or lawn green and healthy all throughout?
Or, want a low-maintenance, fast and efficient lawn irrigation system that you can easily customize according to your watering needs?
Look no further! We have what you need!
INTRODUCING 👍RAINBIRD 5000 SERIES ROTOR SPRINKLER HEAD👍
Our rotor sprinkler is packed with dozens of useful features and offer you a convenient and customizable watering system, so you can relax and have peace of mind that your landscapes are kept green and healthy on all spots! Our patented Rain Curtain Nozzle Technology ensures uniform water distribution and makes our sprinkler ideal for medium to large-size lawns with 25 to 50 feet even distribute of water!
NEED MORE REASONS TO CHOOSE US?
✅ Gentle and efficient close-in watering eliminates dry spots around the rotor, prevents seed washout and allows your turf to grow without matting or bending.
✅ Faster maintenance with a new self-cleaning arc adjustment screw.
✅ Heavy duty construction. Ideal for both residential and commercial applications.
✅ 40 – 360 degrees arc rotation and reversing full circle in one.
✅ Slip clutch mechanism for quick adjustment on installation.
✅ Pressure-activated multi-function wiper seal. Protects internals from debris and assures positive pop-up and retraction.
✅ Reinforced flow path for additional side load strength.
✅ Heavy-duty retract spring assures positive pop-down.
✅ Top-adjust arc adjustment requiring only a flat-blade screwdriver
✅ Radius adjustment screw allows up to 25% radius reduction without changing nozzles.
✅ Additional O-rings and seals for extra protection in "gritty" water.
- 🌼PERFORMANCE – RELIABILITY - VALUE. RAINBIRD Y54007 POP-UP SPRINKLER with industry-leading Rain Curtain Nozzle Technology delivers a uniform spray pattern throughout to ensure that your lawn is watered evenly and consistently over the entire radius! Our rain curtain nozzles include 8 low-angle nozzles and 8 standard angle nozzles.
- 🌼 TIME AND COST-EFFICIENT. Our part-circle pattern pop-up rotor is ideal for medium to large-size lawns and can water from 25 to 50 feet! It produces large water droplets for greater wind resistance, prevent misting and airborne evaporation, so the right amount of water is delivered to the right place, saving you time and money!
- 🌼 FAST INSTALLATION AND MAINTENANCE. The sprinkler head is built with a slip-clutch mechanism that allows quick adjustment on installation. It also features convenient arc adjustment from the top, which requires only a flat-blade screwdriver to adjust. Our pop-up sprinkler has a radius adjustment screw that allows up to 25% radius reduction without changing nozzles.
- 🌼 SOLID CONSTRUCTION. Rainbird Rotary Sprinkler offers reliable and hard-wearing performance and is suitable for both residential and commercial applications. It is designed with heavy-duty cover assembly for extra durability, self-flushing arc adjustment port to clean out the arc adjustment slot and retract spring which assures positive pop-down!
User questions & answers
| Question: | Can this be used normal hose piper or it can only be used for irrigation system |
| Answer: | I don't exactly what you mean by a hose piper but you could mount a 3/4 elbow on a board and use it like a sprinkler. With good water pressure and a 3 or 4 gpm nozzle you could cover a lot of ground |
| Question: | what's the difference in 42SA and 5004PC |
| Answer: | They are exactly the same. 42SA is the retail name you will find in home improvement stores and 5004PC is what it's called by professionals and found in irrigation supply houses. Thank you |
| Question: | Are there instructions for clearning the water from the pipes in the fall for winter preparation |
| Answer: | These heads will pop up automatically when you hook up a sufficiently powerful air compressor and blow out the lines. |
| Question: | Is it a 50' radius or 50' stream from sprinkler head |
| Answer: | It is 50' total (25' each way) 50 foot radius. |
100pcs 360 Degree Adjustable Irrigation Drippers Sprinklers, 1/4 Inch Emitters Drip for Watering System by Korty
- Color: Black and Red Material: Plastic
- Connection:1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube
- 360 Degree Adjustable:8 spray hole and can adjust water flow rate , also for cutting off the water flow.Great for watering potted plants,For agriculture, lawn, garden sprinkler irrigation drip
- Full open they will cover a 10 to 12 inch circle. Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base
- Making effective use of water:Able to maintain constant when Long laying or pressure fluctuations, irrigation uniformity, slow watering rate allows soil to absorb water more completely in the root zones of plants
User questions & answers
| Question: | You can stick them directly in the side of a 1/2 inch hose, right |
| Answer: | You need a tool which punches a hole into the 1/2" tubbing then you can push it into the tubbing. |
| Question: | Can these be use as subsurface drip irrigation for lawn covered by dirt |
| Answer: | NO! These are for drip irrigation for gardens. |
| Question: | Can these be used hanging upsidedown? I need to water a stripp that already has a 1/2"drip tube about 20"above. Thanks |
| Answer: | yes they can be used upside down, however i dont recommend them, about 10 percent of the ones i bought didnt work, and some leak at insertion point |
| Question: | where can i buy the tool which punches a hole into the 1/2" tubbing then you can push it into the tubbing |
| Answer: | Any place that sells drip irrigation. |
20 Pack - Orbit Full Pattern Mushroom Bubbler Sprinkler Head
Orbit
Product description
Orbit Full-Circle Mushroom Bubbler
- Plastic
User questions & answers
| Question: | How many gph |
| Answer: | 2 |
| Question: | Does this work as a replacement for a Toro sprinkler head |
| Answer: | No. This intended to be used in a bed of shrubs/bushes that require more water than would be provided by a drip line. Hope that helps. |
| Question: | Is this the 54042 model |
| Answer: | Absolutely! Maybe they need a better picture, but yes they are and work great they adjusts Flow and all parts are top shelf...I guess I like good products |
| Question: | What's the distance it could spray from lowest to highest |
| Answer: | It doesn’t spray - it’s a bubbler head |
Rain Bird Rotor Heads 5000 Rotor Sprinkler Heads. 4-Pack
Rain Bird
Product description
Using some sprinkler rotors is like shouting into the wind it scatters and nothing is achieved. Use a rotor head that efficiently keeps your lawn green the Rain Bird 5004 Rotor with Exclusive Triple Blade Wiper Seal. The 5004 is 7 times as leak proof as others and sprays a uniform pattern with large water droplets for superior wind resistance and gentle close watering, eliminating brown spots around the head. It can spray at a 40 to 360 degree radius, ensuring even distribution over your lawn. This rotor is ideal for residential, light commercial, and commercial use.
- Exclusive triple blade wiper seal for leak resistant use
- Ideal for residential, light commercial, and commercial use
- Rotates from 40 to 360 degrees
- Heavy duty cover for extra durability
- Pressure activated, triple blade, and multi function wiper seal assures positive pop up and retraction
User questions & answers
| Question: | does this sprinkler have a slip clutch to adjust the left trip point |
| Answer: | It is adjustable from 360 to 0 |
| Question: | Why does my inlet measure 1" wide with a tape measure |
| Answer: | Pipe sizes do refer to physical dimensions, but the plumbing industry standard for the sizes of pipe is not always as straight-forward as measuring the pipe. The "pipe thread size" is measured and based on the inside of the pipe. But, to actually determine the size of a pipe, the outside diameter of each pipe or fitting must be measured and compared to a PVC thread table for size identification. In this example, a 3/4" NPT pipe thread has an outside diameter of 1.050 inches. |
| Question: | What is the spray distance? I have already tried the Rain Bird CP5004PC which is advertised as 26' - 38'. That is too far for my yard |
| Answer: | The actual distance depends on 3 factors: The pressure of your water system, the Nozzle you install on the Rain Bird, and the adjustment you make on the rainbird itself. The Pressure you cannot change. It is what it is. Normally you do not change the nozzles very often either. So with a particular nozzle, you set the Rainbird on maximum and see how far that goes. If it is too far, you just adjust the flow on the Rainbird and shorten it to whatever degree you want. (Less than 10 feet is sort of a waste and there are other rainbirds for that). So you will have no difficulty shortening the distance. People who have a problem usually cannot get a long enough spray because of the low pressure. You will have no problem. |
| Question: | does each one come with a nozzel pack |
| Answer: | Yes, each rotor comes with a nozzle pack. |
HUNTER PGP-ADJ (Box of 20)
HUNTER
Product description
The PGP is Hunter’s original product—the item that put the company on the map in 1981. Its exceptional design and impressive performance placed the rotor a cut above back then, and continuous improvements and enhancements have allowed it to remain the number one selling rotor in the world ever since. With the ability to deliver even water distribution from precision-engineered nozzles, this sprinkler is unequaled in reliability, durability, versatility, and value. With its endless built-in features and Hunter’s years of experience in gear-drive technology, it’s no wonder the PGP remains the professional’s choice year after year.
- Arc setting: 40 to 360 degrees
- 2 year manufacturer warranty!
- Radius: 22' to 52'
- Operating pressure range: 20 to 100 PSI
- Easy radius and arc adjustment.
User questions & answers
| Question: | how do i adjust pgp sprinkler |
| Answer: | Use the adjustment tool. You can change the angle from 90, 180, 360. You adjust the distance by set screw just above the nozzle. |
| Question: | Cuantos aspersores son en |
| Answer: | Viente |
| Question: | How far will it shoot |
| Answer: | I'm not sure what it's rated for but my understanding is that it has a lot more to do with your water pressure. |
| Question: | Cuantos kg pesa la caja con 20 aspersores pgo adj |
| Answer: | approximately 6 kg |
MANSHU 50pcs Adjustable Irrigation Drippers, Drip Emitters Perfect for 4/7mm Tube PE Pipe, Adjustable 360 Degree Water Flow Drip Irrigation System for Flower beds, Vegetable Gardens, Herbs Gardens.
Product description
Adjustable 360 Degree Water Flow Irrigation Drippers, Spray distance from 0 to 20 inch, Suitable for lawn, garden, self plant, vegetable gardens, herbs gardens watering, mass plantings, ground cover, annual flower beds and containers, etc.
- Plastic Irrigation Dripper: these drip emitters are made of quality plastic. Color: Black. The bottom is sharp and easy to insert into the soil. Package Contents: 50 x Drip Irrigation drippers Stakes.
- Size: total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 14mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.
- Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money.
- How to Connect: 1. Connect to the PE pipe directly. 2. Connect to the 4/7 distribution tubing. Tips: Soften the tube hole with hot water before connecting the tube and dripper.
- Wide Application: Suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouse, orchard, lawn, self plant and so on.
User questions & answers
| Question: | how many of these would you use in a 20 gallon pot |
| Answer: | I’m using one in each if my 3 15 gallons, but they’re pretty open at soil level because they’re rose trees. . The flow is adjustable. They were a larger than I thought they would be based on picture and quantity for price. . Certainly no problem if you want to use 3. |
| Question: | Where do u get the tubing and how much are |
| Answer: | From web or hardware store. |
| Question: | Would these connect to half inch tubing |
| Answer: | The irrigation emitters are designed for 1/4 inch tubing. With the correct fittings, you can connect to 1/2 inch supply tubing. |
| Question: | gallons per hour at full flow |
| Answer: | it is adjustable and it depends on the water pressure at the point of drip. Dirt and particles can plug the head up as well, so there is no easy way to figure out. |
EOX Drip Irrigation Emitters, 50 PCS Water Flow Irrigation Drippers 1/4 in Adjustable Drip Emitters Spray Garden Quarter Inch Drip System Emitters 360 Degree Vortex Irrigation Drippers Watering Stake
- 【Max 9 Gal/hr】Max water flow rate of our drip irrigation emitters is 9 gallons-per-hour, suitable for lawn, pots, garden, flower beds, vegetable gardens, herbs gardens, etc. Especially for large garden.
- 【6.5inch Height 】This irrigation drippers stake is 16.5cm/6.5inch Height, compared to the market, our drip emitters stakes have increased by 1.18 inches, which will make it more stable to fix in place. Two Shape for Choice : Fan Shape & Water Flow.
- 【0 to 20inch Spray diameter】Flexible variable adjustable water flow while using, no matter you want it larger, smaller, or turn off. Our drip emitters can achieve what you need.
- 【Only for 1/4 inch irrigation tube】These drip irrigation spray emitters are only suitable for 1/4 inch irrigation tube with 4mm inner diameter, also can be inserted to a 1/2 inch or larger irrigation tube directly. Make sure soak the end of hose by hot water or warming up by hair dryer before connecting.
- 【Don't worry clogging】Common matching accessories have 1/4 inch couplings and barbed tees. These drip irrigation emitters are detachable and very easy to clean. Don't worry about clogging.
User questions & answers
| Question: | Preassebled clamp n pierce bubblers |
| Answer: | This isn't a question. If you are asking if they are pre assembled than yes they are. You just need to attach a 1/4 inch tube from your water source. |
CTKcom Adjustable 360 Degree Water Flow Irrigation Drippers on Stake Emitter Drip System,Pack of 50
Product description
1.Attention: Water exit: Top Height of spike: 13cm / 5.1inch
2.Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube
3.Water flow can be adjustable Practical, portable and easy to install Suitable for pots, tubs, ground cover, landscaped gardens and nurseries
4. Material: Plastic
5. Color: Black
- ✔100% brand new;Water exit: Top
- ✔Height of spike: 13cm / 5.1inch
- ✔Irrigation angle: 360 degree
- ✔Water flow can be adjustable
- ✔Practical, portable and easy to install,When the insertion tube is difficult, you can use hot water to soak the tube head.
User questions & answers
| Question: | What plastic are these made from? Is appears to be Polypropylene (pp; number 5 for recycling). Is it |
| Answer: | They are not stamped for recycling. Either PP or ABS. They hold up well to UV if that is your worry. |
| Question: | Not selling 180 degrees pack of |
| Answer: | I'm not the seller |
| Question: | What is the gah rate |
| Answer: | I would guess the emitter rate at about 3 gal/hr tops. I have mine set at about half that rate. It saturates a 36 inch wide pot in about an hour. |
| Question: | Standard drip line is 1/4 outer Dimension 3/16 inner dimension, will this fit on these drip Stakes |
| Answer: | Yes, that is exactly what I use them for. |
5 Pack - Orbit Drip System 4 Port Watering Manifold for 1/4 Inch Tube
Orbit
Product description
This 4-port full flow water distribution manifold from Orbit has -inch barb ends on each port to allow for connection to -inch sprinkler drip line. This drip irrigation manifold has a filter that is easy to remove and resists nozzle-clogging. You can easily convert your shrub sprinkler head to a dripper irrigation system with a -inch connection to a sprinkler riser. This drip manifold is ideal for do-it-yourselfers who are making repairs or replacements to or creating a new water drip system. Features and Benefits: Has 4 -inch barbed ports to attach to -inch irrigation drip tubing, Has an easy-to-remove filter that reduces nozzle clogging, Attaches to a -inch sprinkler head riser, Durably built to last for many years of micro irrigation.
- Plastic
User questions & answers
| Question: | Can I use this system with gravity fed water |
| Answer: | yes - you could use this on gravity feed.. the output will be a little slower |
| Question: | Do these manifolds come with inlet strainers to prevent blockage |
| Answer: | No, they do not have strainers |
| Question: | Do these manifolds have any built in pressure reduction |
| Answer: | No pressure reduction. Have some extra. If the tubing is very stiff you have to push hard to connect and I broke a couple of barb fittings. Depends on your tubing. |
| Question: | Is the inlet 1/2” female |
| Answer: | Yes, it's female. You should be able to use it with any 1/2" threaded PVC. |
Axe Sickle 100pcs Adjustable Irrigation Drippers Sprinklers 1/4 Inch Emitter Dripper Micro Drip Irrigation Sprinklers for Watering System.
Product description
360 degree Drip Emitters Water flow can be adjustable Adjustable flow rate from 0 to 13 gallons-per-hour,Suitable for pots, tubs, ground cover, landscaped gardens and Etc.
- Color: Black and Red Material: Plastic.
- Full open they will cover a 10 to 12 inch circle.
- Has a 1/4-inch barb thread connection, Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube.
- Great for watering potted plants, Able to Maintain constant when Long laying or pressure fluctuations, irrigation uniformity.
- Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base.
User questions & answers
| Question: | will the pump continue to drip even if buried. or will it clog up and stop dripping |
| Answer: | We run ours on a 20 psi drip regulator and they work great ! |
| Question: | What are these rated for PSI wise |
| Answer: | You should use a pressure reduction fitting to get it below 35 psi. Otherwise, the drip system would come apart from too much pressure. |
| Question: | How can I figure out what the pressure is in my hose |
| Answer: | The t-fitting that connects them in the hose. |
| Question: | What else do you need to install these along the 1/2 inch hose |
| Answer: | If yours came with the TFV9 Tank Yes it will fit or any 810 drip tip tank. |
Orbit 69500 92-Piece Drip Irrigation Assortment Kit
Orbit
Product description
The Orbit DripMaster 92-Piece Essential Parts Assortment kit includes the most commonly used 1/4 in. fittings, heads and accessories. Drip installation instructions are also included in this handy, refillable case. All of the products included are universal and work with most new drip systems. Saves water in drought conditions.
- Includes 1/4" fittings, heads, accessories and installation guide
- Handy, refillable case keeps fittings organized
- Contains the most common and recommended fittings, sprinklers and accessories
- Kit pieces and parts work with most new drip systems
- Saves water in drought conditions by directly watering desired plants and shrubs
User questions & answers
| Question: | Will I need to remove my existing 25 psi pressure restricter to get the sprayers to spray? Would my drippers continue to work |
| Answer: | No do not remove your pressure reducer as the sprayers are designed to work between 20 and 25 PSI. |
| Question: | Does it come with hole punch |
| Answer: | No, it does not. Thanks |
| Question: | Can this be used with Raindrop brand system |
| Answer: | I am going to assume that you mean the "Raindrip" system. If that is correct, it will work fine--I use it with mine. I have found that I do not use the majority of the pieces. I bought it for the elbows, tees, connectors, and the drippers. It seemed like a good method to obtain the pieces I desired. I hope this helps you. |
| Question: | could I hook this up to a 5 gallon bucket to water my veggie garden of 20-25 plants |
| Answer: | Sorry, no. It's more of a repair/extra parts kits for an existing irrigation system. |
Product features
Orbit 92-Piece Drip Irrigation Assortment Kit
The Orbit DripMaster 92-Piece Essential Parts Assortment Kit includes the most commonly used 1/4-inch fittings, heads and accessories. Drip installation instructions are also included in this handy, refillable case which keeps all of your pieces organized and easily at hand. All of the products included are universal and work with most new drip systems. Drip nozzles and fittings conserve water in drought conditions by putting the water directly at the root and using less water overall.
EOX Drip Irrigation Emitters, 50 PCS Fan Shape Irrigation Drippers 1/4 in Adjustable Drip Emitters Spray Garden Quarter Inch Drip System Emitters 360 Degree Vortex Irrigation Drippers Watering Stake
- 【Max 9 Gal/hr】Max water flow rate of our drip irrigation emitters is 9 gallons-per-hour, suitable for lawn, pots, garden, flower beds, vegetable gardens, herbs gardens, etc. Especially for large garden.
- 【6.5inch Height 】This irrigation drippers stake is 16.5cm/6.5inch Height, compared to the market, our drip emitters stakes have increased by 1.18 inches, which will make it more stable to fix in place. Two Shape for Choice : Fan Shape & Water Flow.
- 【0 to 20inch Spray diameter】Flexible variable adjustable water flow while using, no matter you want it larger, smaller, or turn off. Our drip emitters can achieve what you need.
- 【Only for 1/4 inch irrigation tube】These drip irrigation spray emitters are only suitable for 1/4 inch irrigation tube with 4mm inner diameter, also can be inserted to a 1/2 inch or larger irrigation tube directly. Make sure soak the end of hose by hot water or warming up by hair dryer before connecting.
- 【Don't worry clogging】Common matching accessories have 1/4 inch couplings and barbed tees. These drip irrigation emitters are detachable and very easy to clean. Don't worry about clogging.
User questions & answers
| Question: | They are not spraying, but only dripping down, why |
| Answer: | Mine work perfectly. Have you tried twisting the heads to vary the amount of water and thus spray area. I've about 60 pounds per sq. inch water pressure. |
| Question: | What pressure should these be set at |
| Answer: | I don't completely understand your question. I like these because they stake in the ground and are up above the dirt so don't plug up with dirt. To get different pressure or water volume you just turn the cap (blue top) at the top of the stake. You can get full pressure, maybe that is 26 gal an hour but I tame mine down for my roses. Hope I have helped. |
| Question: | Does this come with adapter barb that connects to the main hose |
| Answer: | hi, this is just irrigation drippers, not included adapter barb that connects to the main hose. |
Latest Reviews
View all
Half Ropes
- Updated: 20.07.2023
- Read reviews
Amscan Hair Supplies
- Updated: 29.05.2023
- Read reviews
Smoking Chips
- Updated: 02.01.2023
- Read reviews
Basket Carriers
- Updated: 16.02.2023
- Read reviews
Travel Scrabbles
- Updated: 29.05.2023
- Read reviews