12 best tools shears

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Question:	Does this tool work on Bosch portable drills and impact drivers
Answer:	DWASHRIR works with most 18V-20V impact driver and drill tool brands.
Question:	Will it fit Bostitch
Answer:	Connects via standard 1/4-inch hex shank Compatible with most 18V-20V impact driver and drills
Question:	Can it cut through angle iron, and a garage door track
Answer:	Itsmat the most it will cut is 18 gauge sheet metal
Question:	Will it fit on a makita impact drill
Answer:	Well It just happens that I am using the shears with one of the many Makita impact drivers but it wasn't without a little preparation. The clamping mechanism off the arm has the two pins that insert into retaining holes on the drill body, but mine did not have them so I simply bore a hole on each side in places that the pins could go. It took me about 5 minutes. Now it fits fine and works very well.

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

Features:

√ Sharp and durability, rust resistant SK 5 steel blade.

√ Ergonomically shaped soft non-slip integrated handle.

√ Lock-in blade for safety prevents from injury.

√ The cutting angle is 45°-135°, which can be cut into different shapes of wire grooves as needed.

√ Extra 2 spare replacement blades.



Specification:

Material: SK5 alloy steel

Weight: 0.73 lb

Warranty Service

If there is any issues with our Miter Shears or service for any reason, do not hesitate to contact us by Email. We will give you a new replacement or issue you a full refund. We value customer satisfaction above all else.



Package Including:

1 x Miter Shears

2 x Replacement Blades

• ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
• HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
• ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
• TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
• REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.

User questions & answers

Question:	Can this be used to cut plastic prescription lens to trim it smaller? Thanks
Answer:	Sure, but it depends on the thickness of the plastic prescription lens
Question:	Can i get extra blades on amazon? Co name, part number. Thanks
Answer:	Maybe you can search for miter shears blades, but I don’t know if their blades match our miter cutters. After 1 month, our miter shear replacement blades will also be in stock.
Question:	Can you cut wine corks with it
Answer:	Probably, although I don't know that it would be optimal because of the size of the corks. If you want to slice the cork into shorter peaces (rounds), I think a pipe cutter like the one below would work much better. If you want to cut the cork in half long ways, this might be better. https://www.amazon.com/Zantle-Ratcheting-One-hand-Cutting-Ratchet/dp/B07R8DFWT3/ref=sr_1_1_sspa?dchild=1&keywords=pipe+cutter&qid=1606745561&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMlhWMkVNUjJOTlpVJmVuY3J5cHRlZElkPUEwOTE4NzgyMTVLSlZGNk1XM0czQSZlbmNyeXB0ZWRBZElkPUEwMTA3MzU4QVlZRFlETUUwR0ZaJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Question:	Would these blades for for any brand miter shears
Answer:	Just for GARTOL, this is SK5 blades. We don't others brand, because we are not the same factory!

Product features

Toggle to adjust the angle you want

The basic shear has a jaw with right and left 45° fences, and incised markings for 60°, 75°, 90°, 105°, 120°and 135°. Free to cut the trunking to a different shape when needed.

Don't waste time measuring and cutting when you can do both at the same time with our Miter Cutters.

Multi-function angle shears great for cutting chamfer, shoe molding, trunking and wood parts for carpet.

Handy for odd trimming jobs, rubber plastic edge strip, PVC trunking corner, PVC edge strip, semi-circular strip, thin wooden splicing and so on.

Snipping dowel and rods and all those other tasks too hard for scissors, yet too small for a saw. These multi-angle cutters are great for small daily work activities or even DIY projects.

Works effectively with softwoods up to 3/4" in size.

The set includes additional spare sharp, heavy-duty replaceable blade

Our miter cutter has antirust 2 Sk-5 steel blades, non-slip ergonomically designed handle, high-precision engraving scale, clasp safety lock.

1. Premium stainless steel blade comes ready to take on any job including cutting PVC, piping, wood trim, wires or other similar materials without pulling out big materials.
2. Whether you’re a handy person looking for a new tool or a professional with specific needs these multi-angle cutters are great for small daily work activities or even DIY projects.
3. Our tools come with a full steel frame and ergonomic rubber soles that provides great traction as well as comfort to help the hand when applying pressure on the cutter.
4. Our pre-attached angled reference saves you a load of time and the hassle of measuring the angle trying to cut. Helps with accuracy and efficiency for your angle measuring needs

Product description

The PacTool SS724 Snapper Shear Pro Fiber Cement Cutting Shear is a universal shear head designed to cut fiber cement backer board like HardieBacker It attaches to any cordless drill you already own (18 volts or higher is recommended) Because this tool cuts fiber cement with a shearing action it makes virtually no dust allowing you to cut indoors Designed to cut both 1/4" and 1/2" backer board the tool's head can rotate 360 degrees to make straight right-angle and curve cuts with precision The shear head can even make circle cuts as small as 3" diameter for toilet flanges (although a 1 inch spade bit is recommended to start the cut) The handle rotates for left or right-handed users The Snapper Shear Pro is the latest addition to PacTool's innovative fiber cement cutting tools All of them dramatically reduce airborne silica dust making them one of the best ways to cut cement backer board PacTool is owned by General Tools - the precise tool for doing the job exactly right Offering over 1 000 tools we're proud to provide tradesmen craftsmen and DIYers around the world with a broad range of affordable specific-purpose mechanical hand tools and precision measuring and inspection tools For inquiries please contact our customer service Department at 212-431-6100 We strive to provide our customers with 100% satisfaction Work smarter measure better & be more productive with General Tools

• FITS ONTO ANY DRILL- Bring your own drill the Snapper Shear Pro attaches to any cordless drill (recommended 18V or higher for best performance)
• POWERFUL BLADES- Cuts ¼” and 1/2” HardieBacker backer board with ease
• CUT ANY SHAPE ANYWHERE- Straight right-angle and curve cuts even circle cuts as small as 3” diameter
• LESS DUST LESS MESS- Keep the job OSHA compliant this unique backerboard shear design allows for both indoor and outdoor operation Use indoors without covering the house in dust easy clean up!
• ONE SIZE FITS ALL- Adjusts for right or left-handed users
• HANDLE- Adapts for right or left-handed users

User questions & answers

Question:	Can this be used for Hardi Plank
Answer:	I don't know if they are dye free, but the blue doesn't come out, it wont stain anything. I will use it in white surfaces and they remain white
Question:	Can this be used to cut 5/16" cement board siding (cemplank), as opposed to backer board
Answer:	they seem packed in sterile package
Question:	Can i use this on a 20v drill
Answer:	If the package is not completely sealed I would definitely not treat them as sterile. They can be autoclaved for sterility if you have that option.
Question:	Will this cut 1/2 cementboard
Answer:	Yes they are packaged individually

Product description

The DEWALT DCS491B 20V max* 18 gauge swivel head Shears features a 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort. Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts. Cordless Shears allows user to take the tool to the work place. Specifications: capacity (stainless steel) - 20 gauge, capacity (mild steel) - 18 gauge, strokes/min - 0-2,300 SPD, min cutting Radius - 5.5 inches. Includes: 20V max* swivel head Shear bare tool. *(Tool only / battery sold separately)

• 360 Degree tool free swivel head which allows user to access tight quarters
• Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts
• Cordless shears allows user to take the tool to the work Place
• Backed by dewalt's 3 year limited Warranty
• Battery & Charger Sold Separately

User questions & answers

Question:	Does come with batteries
Answer:	Please see our explosion chart for all parts included with the item - https://media.kingstonbrass.com/pdf/technical/parts/kingston-brass-KB311-parts-diagram.pdf
Question:	Is this a brushless power tool and will this tool cut through 0.090 sheet aluminum
Answer:	The bidet faucet does not have a vacuum breaker, we do not sell with and do not make any separate vacuum breakers.
Question:	Where could i get new cutting heads for this
Answer:	Yes, I was satisfied with the product and the service. But on the second order the price went up substantially high.
Question:	Is there a way to get hold of a hard case this will work for this
Answer:	the waterline connector not included. thanks

Product description

The DEWALT DCS494B 20V MAX* 14ga Swivel Head Double Cut Shears, Bare tool is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. This is a bare tool times, battery sold separately. Includes: DCS494 shears, Hex wrench.

• 360 degree tool with a free swivel head which allows user to access tight quarters
• Cuts 7/32" strip which continuously curls out of the cutting area providing accurate cuts
• LED work light illuminates surface
• Cordless shears allows user to take the tool to the workplace
• Battery sold separately
• Battery & Charger Sold Separately

User questions & answers

Question:	So I can only cut heavy gauge and not light gauge metal
Answer:	I would say these products will not come off, the quality is pretty good, you will get an additional toilet seat lifter too! so I don't have to touch the toilet seat with my hands, I recommended!
Question:	Is it brushless
Answer:	So far they are good, the adhesive is very strong! BTW, please check the position on the bottom of the Toilet seat before using it.
Question:	I assume this is the case but just to confirm... Is it variable speed
Answer:	Yes, I purchased Luxe Bidet and this item, they fit perfectly, and I do think it is very useful that you can buy these bumpers too if you already have the Bidet Attachments, they are like partners, lol
Question:	Will this work cutting across the “wave” shape of corrugated sheet metal
Answer:	Contact Kingston Brass, Inc. We are here to help answer your product questions and concerns. If you have a question regarding the installation, warranty or the cleaning and care of a Kingston Brass product, you may first want to visit the Frequently Asked Questions section to get an immediate answer. Business Address: Kingston Brass Inc. , 12775 Reservoir St., Chino, CA 91710 Hours of Operation: Mon – Fri: 8am – 5pm (PST), Saturdays and Sundays: Closed Phone: Call: 1-877-252-7277 Fax: 1-909-548-6622 Email: General Inquiry: [email protected] Warranty: [email protected] Technical Support: [email protected] Sales: [email protected]

Product description

This rugged and reliable Bypass Pruner is ideal for making clean cuts through green, living growth. A fully hardened, precision-ground steel blade stays sharp longer, and a corrosion-resistant, low-friction coating makes cutting easier. A self-cleaning sap groove keeps the blades from sticking, and a non-slip, comfort-grip handle accommodates left- and right-handed users. All-steel construction provides long-lasting durability.

From the Manufacturer

Is it time again to tame the garden? If so, these coated pruning shears are ready to tackle the job. The cambered, beveled blade is made of non-stick high carbon steel so it cuts smoothly and easily. Shears feature an ambidextrous lock, sap groove, enclosed spring, and dual layer comfort grips.

Fiskars is a global company with manufacturing locations all over the world, including several places in the US. The 9109 Bypass Pruner is made in China. Many of Fiskars' blades are stainless steel. The blade on the 9109 is a coated, high carbon steel blade. To learn more about this pruner and other Fiskars products, please visit us at www.fiskars.com.

• Ideal for cutting stems and light branches. Easy-open lock protects the blade during transport and storage
• Fully hardened, precision-ground steel blade stays sharp, even through heavy use
• Low-friction coating helps blade glide through wood, prevents the blades from gumming up with sap and debris and helps the blades resist rust
• Maximum cutting capacity: 5/8 inch diamater
• Lifetime warranty

User questions & answers

Question:	I would like these shears for cutting the hard dorsal, pectoral and tail fins off of fresh whole fish like salmon, bass, trout etc? will it work well
Answer:	yes it is,i have several friends that own landscape company.
Question:	How thick the branches you can cut
Answer:	Consumer 5 yrs, commercial 2 yrs, dont know aboutextended warranty
Question:	Is this item made in USA
Answer:	Yes, Echo is a better quality product and they offer a consumer five year warranty
Question:	Silly question but what is the difference between bypass pruners and those not labeled "bypass"... I see mixed results on Amazon and Fiskar
Answer:	Need to mix oil and gas in a can not blower.

Product features

Bypass Blade Design

Provides clean cuts on stems and small branches up to 5/8 inch thick.

Non-stick Coating

Low-friction coating helps blade glide through wood, prevents the blades from gumming up with sap and debris and helps the blades resist rust.

Designed for Durability

All-steel design provides excellent durability for lasting value. Lifetime warranty.

Product description

The Marksman EZ Shear is a versatile, light-duty Cutter that makes ultra-quick cuts on a variety of products without dust, noise, or electricity. This 13 inch guillotine Cutter is designed to cut flooring such as laminate, engineered wood, Luxury vinyl tile or plank, and more. Make cuts up to 13 in. Wide and 9/16 in. Thick. The innovative 2019 design has bigger bearings to increase cut power, a longer fence for greater precision, and a longer, stronger handle for more leverage. We’re proud to make our EZ shears right here in the USA, and offer a one year warranty.

• Cut where you work - save time walking to and from your saw
• One shear blade outlasts over 20 saw blades
• Dust free/ quiet operation/ no electricity - Cut anytime day or night
• Built-in ruler and movable fence for 45° (up to 9 in. Wide) and 90° cuts
• Made in the USA and a 1-year factory-backed warranty

User questions & answers

Question:	Will this work with Mohawk Home laminate flooring available at Costco
Answer:	Not familiar with that particular brand. That said: Unless that flooring has metal in it, it should work, and work well. Pretty much all laminate is the same to this tool.
Question:	Can this cut VCT
Answer:	Yes, definitely. Maximum thickness for all materials: 9/16" (14mm) Laminate flooring up to 12mm (with attached underlayment) Engineered wood to 1250lb Janka Luxury vinyl plank Luxury vinyl tile (LVT) Vinyl composite tile (VCT) Commercial Vinyl Parquet Permastone Fritz Tile PVC Tile Cove Base Rubber Tile Siding, Fiber cement lap Siding, Pressboard lap Siding, Vinyl Shingles, Tar or Wood
Question:	Will this cut SPC flooring
Answer:	We would highly recommend upgrading to the Bullet Tools Magnum Edge 13" Cutter for cutting SPC rigid core vinyl. You can get by with the EZ shear if the SPC has a wear layer of AC4 or lower, and does not exceed 1250 on the Janka hardness scale, but, again, the upgraded Magnum Series would be better suited for this application. Thanks!
Question:	este cortador se pude utilizar para cortar vinilo water proof
Answer:	Buenas tardes, si amigo perfectamente

Product description

PACTOOL IS NOW PART OF GENERAL TOOLS PacTool International, manufacturer of exterior construction tools such as siding installation gauges, cutting and roofing tools is now part of the General Tools family. Together we provide both interior and exterior home improvement professionals and DIYers with an extensive product line of best-selling, quality tools that can be counted on when building, restoring and maintaining a home. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction . WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Looking for the quickest, cleanest way to install tile? The Razorbacker from PacTools International slices through HardiBacker super fast, easy and straight -- and it cuts great curves too. There's no dirty cement dust or grit to scratch enamel or ceramics and make your clean-up a headache.

From the Manufacturer

The Backerboard Shear cuts HardiBacker backerboard up to 1/2" thick. Not for siding. For straight and curved cuts. Smooth, fast, and dust-free operation. Based on a 1/2" 6.5-amp motor. Reversible blades machined from solid tool steel.

• STRAIGHT & CLEAN CUTS - Snapper Shear cuts up to 1/2” thick Hardiebacker fiber cement under layment
• DUST-FREE- Unique backerboard shear design allows for both indoor and outdoor operation. Use indoors without covering the house in dust, easy clean up!
• FASTER & EASIER- when the Snapper Shear is used to cut fiber cement, compared to using score-and-snap, with less broken corners
• POWERFUL MOTOR- Backerboard Snapper Shear boasts a contractor grade 6.5-amp motor
• LOWER JOB SITE COST- increased efficiency and reversible blades machined from solid tool steel need less replacements , durable enough for 20,000 running feet when used appropriately

User questions & answers

Question:	I want to cut up and remove a fiberglass tub and surround without filling the house with fibers. Seems like this would work. Anyone tried it
Answer:	yes you can i use mine with a a ridgid 18 volt drill just make sure it is a drill and not a impact driver
Question:	Could this be used to cut 8mm laminate wood flooring
Answer:	It cuts hardie backer board better than cement board because cement board is more of a cemented material with thread inserted.
Question:	is the motor the same as the 404 and can you use the 404 blades on the
Answer:	yes.
Question:	Will these work with laminate flooring
Answer:	yes

Product features

Cut Backerboard Indoors!

Combining our patented precision engineered shear head with a powerful 6.5 amp motor, the Snapper Shear SS424 powers through fiber-cement backerboard for fast clean cuts. With quiet operation and no airborne dust, it’s the perfect solution for indoor work, plus it beats score & snap methods hands-down. Get the original.

Product description

Turbo Shear, Straight, Left Cutting Action, Curve Type Tight Patterns, Right Angles, Metal Gauge 18 Mild Steel 20 Galvanized 22 Stainless Steel, Steel, Installs In Chuck Of 1200 RPM Or Larger Drill Including Tight Patterns And Square Cuts

The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.

• Turns your power drill into a power shear
• Inserts into chuck of an A/C or cordless drill
• 20 gauge capacity in galvanized steel
• Navigates tight patterns and square cuts
• TSDC Drill Clamp can be purchased separately
• Made in the USA

User questions & answers

Question:	could you use this for cold form steel framing? cutting studs, track, etc
Answer:	The ss404 and ss400 snapper shears are interchangeable not sure if it the same for the ss424 blades you'd have to contact the manufacturer directly
Question:	Does the handle come off
Answer:	I have never used them for that. I have some scrap pieces, maybe I should try that. I install laminate flooring to some times...
Question:	will it stainless steel of 1mm
Answer:	This works great on the 7/16" Hardie Backer. I have no doubt that it would also work just fine on 1/2" Hardie Plank. I am a 68 year old woman and have no trouble at all using this tool.
Question:	Can this cut HardiPlank
Answer:	Absolutely. In fact, I didn't know it would cut backer board. I built a shed with 5/16" hardiboard siding all the way around, and it was one of the life savers of the project.

Product features

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Description:

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It’s that easy to convert your power drill to a power shear!

This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2”(12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable.

Product description

Everything you need in one complete set, the Milwaukee PVC Shear kit includes an M12 plastic pipe Shear, M12 red Lithium battery, 30-minute charger, and carrying case. The variable speed trigger with reverse can cut up to 2” of schedule 40 PVC in just three seconds, while the all-metal planetary drive delivers over 200 cuts per charge. Additional features include a durable aluminum jaw, impact, water, and rust resistance, an on-board fuel gauge that displays remaining run-time. The tool’s Specs are as follows: 12V, 1, 900 in/lbs. torque, cut capacity: 2" PVC (2-3/8" odd.), 3mm reinforced stainless steel blade, on board storage, 14-3/8" overall length, and overall weight of 4.7 pounds.

From the Manufacturer

Cutting faster, cleaner and closer than traditional methods, the new 2470-21 M12 Cordless PVC Shear utilizes a super sharp stainless steel blade for burr-free cuts, slices through 2” PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the MILWAUKEE M12 LITHIUM-ION battery, the new PVC Shear is able to cut over 200 times on a single charge. Includes: 2470-20 M12 PVC Shear, M12 LITHIUM-ION Battery, 30-Minute Charger, Carrying Case.

• Includes pipe shear, battery, charger, and carrying case
• Ultra sharp blade with pierce point
• Impact, water, and rust resistant
• Overall weight: 4.7 lbs.
• Overall length: 14-3/8”
• Powerful Mechanism - Cuts up to 2" schedule 40 PVC in 3 seconds. Ultra Sharp Blade with Pierce Point - No burrs or shavings to remove
• Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall Quick Return Blade - Increased productivity during repetitive cuts. All Metal Planetary Drive - Delivers over 200 cuts per charge

User questions & answers

Question:	Will this cut 2” cpvc
Answer:	As of yet, I have not cut any stainless steel with it, so I can not answer your question for sure, but all the other metals I have cut with it,like roofing tin, steel mash and others, it did cut them with ease!
Question:	What is the difference between the 2470-20 and the
Answer:	Not
Question:	Question for seller only: Does this item come with a battery charger and case? Item description does not mention either of those, only a battery
Answer:	hi. the tool cuts through fiber concrete board easy, so i would think it would cut resin and fiber glass easy. also could cut with saber saw and hold shop vac to pick up fiber. also stick fan in window and suck fibers out.
Question:	can it be used for tree branches
Answer:	The suggestion to cut laminate flooring with a miter saw is a good one, however you want the good side DOWN to minimize chipping from a circular saw blade. Good side up would be okay for a manually operated hand saw in a miter box, but who does that?

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

• 8-Inch Gardening Shears With Ergonomically Designed Non-Slip Handles, Strong, Lightweight, And Comfortable
• Quality Pruning Shears Come With Precision-Sharpened Blades Ideal For Cutting Stems And Light Branches
• Safe And Secure Sideways Locking Mechanism That Keeps Your Blades Protected And Closed When Not In Use
• Easily Get Between Plants To "Clip And Snip" Only The Area Or Part That You Want To Cut With One-Hand And Without Damaging The Other Stems
• Can Cut Up To 3/4" Diameter Size Tree Branches Depending On The Tree Species

User questions & answers

Question:	Where are they made
Answer:	A 3-in-one general purpose oil is all you need
Question:	Please tell me the material of the gold part of the blade
Answer:	I believe it should. It is very sharp and I have used it for pruning lot of small plants and trees.
Question:	Is this product made in the USA
Answer:	Titanium is a very lightweight yet strong metal. Refer to the Wikipedia entry for titanium at wikipedia.org/wiki/Titanium. Here is a relevant excerpt on titanium nitrides used as coatings for steel in drill bits and cutting blades: Titanium nitride (TiN) is a member of a family of refractory transition metal nitrides and exhibits properties similar to both covalent compounds including; thermodynamic stability, extreme hardness, thermal/electrical conductivity, and a high melting point.30 TiN has a hardness equivalent to sapphire and carborundum (9.0 on the Mohs Scale),31 and is often used to coat cutting tools, such as drill bits.32 It is also used as a gold-colored decorative finish and as a barrier metal in semiconductor fabrication.33 Titanium carbide, which is also very hard, is found in cutting tools and coatings.34 So, presumably the usage titanium steel in the product description is simply referring to steel coated with a titanium alloy to improve hardness. Perhaps Gonicc could have used a more-detailed term although their usage is pretty mainstream. Search for "titanium drill bits" on Amazon - they are all titanium-coated steel.
Question:	Why did my clippers fall apart and I lost the bolt
Answer:	Apparently no warranty, the spring fell out the first day of use and emails produced no response.

Product features

DURABLE

Ergonomically designed garden scissors, durable, lightweight, and comfortable, can cut up to 3/4" diameter-sized tree branches

A MUST HAVE TOOL

Are you looking for quality pruning scissors?

Mr. Pen Garden Scissors is a must-have tool in your home. These scissors are ideal for a variety of general pruning tasks. Easy cutting of your deadheading, trimming, shaping needs for your roses, annuals, vegetable, bonsai, and small flower gardens. A self-cleaning with safe and secure sideways locking mechanism that keeps your blades protected and closed when not in use, It has a non-slip handle and quickly gets between plants to "clip and snip" with one-hand and without damaging the other stems.

A MUST HAVE TOOL

Looking for a quality pruning scissors?

Mr. Pen Garden Scissors is a must-have tool in your home. These scissors are ideal for a variety of general pruning tasks. Easy cutting of your deadheading, trimming, shaping needs for your roses, annuals, vegetable, bonsai and small flower gardens. A self-cleaning with safe and secure sideways locking mechanism that keeps your blades protected and closed when not in use, It has a non-slip handle and easily get between plants to "clip and snip" with one-hand and without damaging the other stems.

A MUST HAVE TOOL

Looking for a quality pruning scissors?

Mr. Pen Garden Scissors is a must-have tool in your home. These scissors are ideal for a variety of general pruning tasks. Easy cutting of your deadheading, trimming, shaping needs for your roses, annuals, vegetable, bonsai and small flower gardens. A self-cleaning with safe and secure sideways locking mechanism that keeps your blades protected and closed when not in use, It has a non-slip handle and easily get between plants to "clip and snip" with one-hand and without damaging the other stems.

A MUST HAVE TOOL

Looking for a quality pruning scissors?

Mr. Pen Garden Scissors is a must-have tool in your home. These scissors are ideal for a variety of general pruning tasks. Easy cutting of your deadheading, trimming, shaping needs for your roses, annuals, vegetable, bonsai and small flower gardens. A self-cleaning with safe and secure sideways locking mechanism that keeps your blades protected and closed when not in use, It has a non-slip handle and easily get between plants to "clip and snip" with one-hand and without damaging the other stems.