12 best harmonica holders

Product description

Using a harmonica holder leaves your hands free to play a guitar or other musical instrument at the same time as a harmonica. The 154 harmonica holder is designed for use with most 10-hole model harmonicas, making it smaller and lighter weight than some other models, but it still offers a rubberized neck Brace and sturdy frame. A single wing nut is used to lock it in playing position-throww in your harp and you're ready to go. One size fits all, and the device easily locks in place at any distance from your mouth.

• Designed for use with most 10-hole Harmonicas
• Comfortable rubberized neck Brace and sturdy frame
• One size fits all
• Leaves your hands free to play a guitar or another musical instrument

User questions & answers

Question:	Not sure I understand the small swivel holders. What exactly are they doing? Seem to get in the way more than anything
Answer:	Yes. Easily switch back and forth, hands-free.
Question:	Is the product white, black, red, and blue... OR... white, black, red, or blue
Answer:	When did I become Hohner customer support. I criticized this holder years ago because it's put together wrong. If you look at the picture, when it's hung around your neck, it will dig into your chest. The part that goes around your neck was put on wrong. I had to take mine apart and rebuild it to make it right. I also talked to a executive at the Hohner factory and he said no one had ever mentioned this and that they had been building them wrong since the 1940s. If your 12 hole is less than 7" long it should fit.
Question:	Will this holder work to quickly switch back and forth to singing, all the while playing piano accompaniment? Or is another holder better for this
Answer:	I've been using Golden Melody harmonicas for 30 years and I play lots of pop, rock-and-roll, folk, some blues. I first started using them primarily because they last longer than the Marine Band harmonicas, and they are easier to break in. I recommend starting with a Golden Melody or Special 20, and then if you want to, try a Marine Band or Blues Harp. They are all good harmonicas. Kevin M. www.singalongwithkevinm.com
Question:	Will this support a 12-hole harmonica
Answer:	yes, it comes in original red hard plastic storage case.

Product features

Hohner 154 Harmonica Neck Holder

This Harmonica Neck holder is designed for use of most 10-hole harmonicas. It has a comfortable rubberized neck brace and sturdy frame. The neck holder allows you to be hands free so you can perform other instruments while playing harmonica. One size fits all.

Product description

The HH01 harmonica holder is designed for use with most 10-hole model harmonicas, making it smaller and lighter weight than some other models, but it still offers a rubberized neck brace and sturdy frame. Double wing nuts are used to lock it in playing position--throw in your harp and you're ready to go. One size fits all, and the device easily locks in place at any distance from your mouth.

• Designed for use with most 10-hole harmonicas
• Comfortable rubberized neck brace and sturdy frame
• Double wing nuts lock harmonicas into playing position
• One size fits all
• Leaves your hands free to play a guitar or another musical instrument

User questions & answers

Question:	Okay, is there some secret to getting this to stay upright? It just flops over as soon as I start playing, no matter how much I tighten it
Answer:	Yes. This holder is designed to fit all of the smaller harps.
Question:	Does the harmonica come with this product
Answer:	It would work with any ten holes harp. I just have a Suzuki as different grande from hohner,mand it fits perferct. I think it runs with all DIATONIC (ten holes) harmonicas
Question:	Does a Hohner "Old Stand-by" fit in the HH01 holder
Answer:	We recommend a natural antiseptic spray such as Tea Tree oil, sprayed into both ends. You can also use a flexible item like a wire brush to push through the didge to help clean, dry, and apply the antiseptic. Thank you.
Question:	Does it work on other brands
Answer:	The Hardwood Spiral Didgeridoo from World Percussion USA is in the key of C#. The pitch can be bent by compressing or loosening the buzz, down to key of C and up to key of D. Thanks!

Product features

Hohner Harmonica Holder HH01

This traditional Hohner Harmonica holder is designed for use with most 10-hole harmonicas. It has a comfortable rubberized neck with a sturdy frame. One size fits all. The harmonica holder leaves your hands free allowing for easy play of a guitar or other musical instrument.

• Harmonica neck holder for 10 holes harmonica.
• Hook on the neck to set your hands free for playing other instrument and harmonica at the same time.
• Comes with extra felt pads for you to stick them on the base of the harmonica holder, to prevent scratches and help protect your harmonica.
• Note: This harmonica holder only works for 10 hole harmonica. Do not work for 20 holes or long harmonicas.
• Package includes 1x harmonica holder and few felt pads.

User questions & answers

Question:	Can you play Polly wolly doodle on this G harmonica
Answer:	I don’t know and I can’t say because I am a beginner myself but I can say that I am enjoying it trying to learn and I am doing quite well if I gotta say so myself.
Question:	Will this fit a 4 year old child
Answer:	From the great sound of this harmonica , I am convinced it is the authentic version.
Question:	Is this Harmonica a scale changer
Answer:	You have a "buggered" or misaligned screw device on one or both sides. Did you disassemble the tightening devices at any time? Do it now and check the groves of the tightening devices. They should be clean and not look as if they are folded over. If you did not take it apart at any time previously, it is probably a manufacturing defect. Usually the problem, if any, is finding the right angle initially. The assembled unit out of the package is so tight that the user has to use force and care in getting the angle correct. I've used two of these and had no problems, especially with them not holding the set position.
Question:	Is this the authentic version or is it from a second source
Answer:	The harmonica does not come with the holder.

Product features

Eison 10 Holes Harmonica Holder

• Hold Harmonica Size: About 5 inch
• Width:About 7 inch
• Total Expand Length: About 14 inch

Material: Metal

Color:Black

Suitable:Most of 10 hole harmonicas

Prevent Scratches from Harmonica

Extra Pads for Double Protection

Make Your Neck Comfortable

Holder frame with screw can rotate 180 up to 360 degrees

• Not In Use: fold it to save space.

• In Use: adjust the angle to suitable for your performance.

Spring Tension Clamps

The spring tension is designed a little bit tight, which can hold harp tightly, protect your harmonica from falling down easily.

Refer to the steps in the picture below, you can put the harmonica in and out easier.

Eison Harmonica Frame Installation Method

• 1. Make sure that your harmonica is 10-holes and harp length size is under 5''
• 2. Place the harmonica as shown 1→ two hands to fix the harmonica frame→ two thumbs down the lower splint
• 3. Aim the harmonica bottom to snap the harp into place as shown 2
• 4. Wear harmonica holder to your neck,tighten the screw and fix into suitable position as shown 3
• 5.Then you could play the harmonica ,opens your music journey!

What's More, It Is A Great Idea to Buy Another Eison 10 Holes Harmonica for Your Family & Friends as A Great Birthday/Festival/Christmas Gift !

Product description

Using a harmonica holder leaves your hands free to play a guitar or other musical instrument at the same time as a harmonica. The MZ 2010 harmonica holder is designed for use with most 10-hole model harmonicas, making it smaller and lighter weight than some other models, but it still offers a rubberized neck brace and sturdy frame. Plastic knobs are used to lock it in playing position--throw in your harp and you're ready to go. One size fits all, and the device easily locks in place at any distance from your mouth.

• Designed for use with most 10-hole harmonicas
• Comfortable rubberized neck brace and sturdy frame
• One size fits all
• Leaves your hands free to play a guitar or another musical instrument
• Sleek black design

User questions & answers

Question:	I had a harp rack once before and the harmonica was several inches away from my mouth. I couldn't adjust it. Is this one going to avoid those problems
Answer:	Yes, there is about 1 inch to set it up or down on the horizontal part. In my case, it was not low enough, so i drilled two holes another inch below and it fits me very well.
Question:	Does this fit XB
Answer:	Just put it on my scale, 13.3oz. Not really a light holder but a great piece of equipment.
Question:	Can the hamonica horizontal holder part be lowered down / slid down the holder shafts as an adjustment
Answer:	Yes, of course you can. You can also doodle Polly all day.
Question:	Anyone know the weight of this holder
Answer:	Could be.

Product features

Hohner MZ 2010 Flex Rack Harmonica Holder

This harmonica holder is designed for use of most 10-hole harmonicas. It has a comfortable rubberized neck brace and a sturdy frame. It has a sleek back design, and allows your hands to be free to play guitar or another instrument.

Product description

Lee Oskar harmonica holder.

• Lee Oskar harmonica holder

User questions & answers

Question:	Will this hold a kazoo
Answer:	My Special 20 fts fine. I put some tubing aroundthe neck band to make it more comfortable when I am playing.
Question:	My harmonica is 7 inches long and 0.8 inch thick (18 cm long, 2 cm thick), will it fit into this holder? Where is the seller shipping it from
Answer:	Most certainly. I've found that the triangle cut sandwiches tend to hold better due to the more narrow diameter of the sandwich. You may experience significant crushing of sandwich if you don't use some sturdy bread. I recommend using some rustic bread with a hefty crust and avoiding slippery sandwich ingredients such as avocados and tomatoes. Also, once you take a bite of the sandwich, if you leave the screw loose, you can just tilt the remaining sandwich towards you until you get to the end.
Question:	I have a Hohner Special 20 (10 hole). Is this great for that
Answer:	This is the Cadillac of harp racks. I love mine. You can put it as close to your mouth as you want. It’s super adjustable and totally worth the price!
Question:	Could this hold a sandwich
Answer:	The XB-40 is like an over sized Hohner Special 20. I believe it should fit fine in the Flex Rack.

Product description

professional harmonica holder Designed for use with most 10-hole harmonicas

• It would work with any 10 holes harp,
• Comfortable rubberized neck brace and sturdy frame
• Holder frame with screw can rotate 180 up to 360 degrees Double wing nuts lock harmonicas into playing position，The spring tension is designed a little bit tight, which can hold harp tightly, protect your harmonica from falling down easily.
• Hold Harmonica Size: About 5 inch Width:About 7 inch Total Expand Length: About 14 inch
• Leaves your hands free to play a guitar or another musical instrument 。it's pretty easy to change out harmonicas. If you're asking, "Is it possible to change harmonicas with 1 hand?" I'd say no. Changing harmonicas only takes a quick second but will require 2 hands.

Product description

Perfect for most 10-Hole Harmonicas, this high quality, adjustable harmonica holder comes to you Brand New and Factory Sealed! It is a Spring Loaded holder designed for fast harmonica changes. With padding to protect your harmonica from marks or residues, and padding for your neck, this harmonica holder will adjust to your perfect comfort angle. It folds flat for easy storage as well. Where the harmonica fits measures 4.5 inches wide. With this harmonica holder and a little bit of practice, who knows.... you could be the next Bob Dylan or Neil Young!

• Neck Holder for 10-Hole Harmonicas
• Spring-Loaded holder designed for fast harmonica changes
• Padding to protect your harmonica from marks or residues, and Padding for your neck
• Adjustable

User questions & answers

Question:	Does this holder self lock? As in if it was lying on your chest and then you rotate it up would it stay in place
Answer:	Shelvi's Shack says, "Sorry we took so long to respond, Austin... we asked an actual harmonica player about this, and he said,'This holder will not accommodate a 7" harmonica. You can, however, buy larger racks to attach to the neck holder, but it's probably easier to find the whole thing than just the rack.' Hope this helps!"

Product description

Particularly suitable for blues harmonica models. Molded rubber sections on the support arms hold the instrument securely. Easily adjusted by spring tension and two knurled screws. The neck frame has a soft rubber covering for extra comfort.

• Spring Tension clamping
• Steel construction
• Soft rubber covered neck frame
• 7. 283 x 1. 693 Max instrument size
• Particularly suitable for blues harmonica models with 4. 252" Max. Instrument breadth

User questions & answers

Question:	Can this hold my juul while I play video games
Answer:	I am Wilco. Nice to meet you. I'm in my music store right now, so I could measure 5 racks. None will take an 8" harp. As I recall, that might be the reason that I bought the K&M. Look at the harmonica forums, and you can see how the K&M is modified to make it a better "fit." I use both of the Hohners. I play some 12 hole diatonics and some chromatics with the bigger hohner.
Question:	can this harmonica neck holder rack for my 21 hole harmonica
Answer:	When you tighten the wing nuts it stays at the angle you set it at. The actual holder part is spring loaded so it firmly holds the harmonica.
Question:	Is this rack easy to open. I have a Hohner and it's very difficult, almost impossible. And also will it hold a 8 inch harmonia
Answer:	It might hold a kazoo. maybe with the help of a rubber band around it also...It is a good level for hitting the mouth area. and the spring is good and strong.

Product description

Perfect for hands-free playing! The IHH1020 fits comfortably around your neck and holds the instrument firmly while you play. It's perfect for jam sessions or performances where multiple instruments are being played. (Tip: getting two of these holders can provide one for use on the road and one at home, or make it easy to have different harmonicas already mounted and ready to use hands-free.).

From the Manufacturer

Perfect for hands-free playing! The IHH1020 fits comfortably around your neck and holds the instrument firmly while you play. It's perfect for jam sessions or performances where multiple instruments are being played. (Tip: Getting two of these holders can provide one for use on the road and one at home, or make it easy to have different harmonicas already mounted and ready to use hands-free.)

• Perfect for hands-free playing
• Fits comfortably around your neck and durable springs hold harmonica in place while playing
• Perfect for jam sessions or performances where multiple instruments are being played
• Easy to position and lock in place with double wing nuts
• Holds 10 - 20 hole harmonicas up to 6.5"

Product features

On-Stage IHH1020

Perfect for hands-free playing! The IHH1020 fits comfortably around your neck and holds the instrument firmly while you play. It’s perfect for jam sessions or performances where multiple instruments are being played. (Tip: Getting two of these holders can provide one for use on the road and one at home, or make it easy to have different harmonicas already mounted and ready to use hands-free.)

Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.

Product description

For various harmonica models and types. Covered neck frame. Adjustable spring-tension instrument holder. Legendary K&M quality.

• Spring tension clamping
• Steel construction
• Soft rubber covered neck frame
• 7.283 x 1.929 - Maximum instrument size

Product description

Features:

✔ CLAMP YOUR HARMONICA: Sturdy frame of spring tension wrapped by rubber pad clamps your harmonica tightly with no scratches.

✔ 10 HOLDS: Designed for most 10-hole harmonicas, spring loaded, lightweight, comfortable,easy installation.

✔ NECK BRACE: Comfortable rubberized neck brace. You won't feel uncomfortable when playing harmonica in a long time.

✔ HAND FREE: leaves your hands free to play a guitar or another musical instrument.



Specification:

Condition: 100% Brand New

Material: Metal + Rubber Tube

Color: Silver

Suitable for 10 hole harmonicas.

Available Max Harmonica Length: Approx. 12cm / 4.7inch

Weight: Approx. 122g



Packing List:

1 x Harmonica Neck Holder

* Harmonica is not included.

• CLAMP YOUR HARMONICA: Sturdy frame of spring tension wrapped by rubber pad clamps your harmonica tightly with no scratches.
• 10 HOLDS: Designed for most 10-hole harmonicas, spring loaded, lightweight, comfortable,easy installation.
• NECK BRACE: Comfortable rubberized neck brace. You won't feel uncomfortable when playing harmonica in a long time.
• HAND FREE: leaves your hands free to play a guitar or another musical instrument.
• GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon.

Product description

Description



Suit for harmonica. This holder is designed for 24-hole harmonica. Easily adjustable and comfortable around neck for hands-free playing. Can hold the harmonica steadily in order to prevent the harmonica from sliding out. Lightweight, comfortable, easy to use. Fit for different brands of 24 holes harmonicas. Made of high-quality stainless steel, durable and sturdy.



Features



- Color: Silver

- Material: Stainless Steel

- Size: 22.2 x 21.5 x 2cm



Package Including

Harmonica holder neck holder stand for 24-hole harmonicas

• Made of high-quality stainless steel, durable and sturdy.
• Double wing nuts lock harmonicas into playing position, easily adjustable and comfortable around neck for hands-free playing
• This holder is designed for 24-hole harmonica. Fit for different brands of 24 holes harmonicas.
• Can hold the harmonica steadily in order to prevent the harmonica from sliding out. Lightweight, comfortable, easy to use.
• Material: Stainless Steel