10 best rack reverb

Product description

The all metal DB DISPLAY MKII decibel display from American Audio is for monitoring your sound volume. It also creates a great light show in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

• Designed to set in an amp rack to view your decibel level and Creates a great light show in your amp rack
• Display progresses from green through amber to red and Sensitivity adjustment on both left and right channels
• 2 separate modes: dot and bar and Includes 5V power supply
• Line Inputs: Left & Right RCA / Left & Right XLR and Line Outputs: Left & Right RCA / Left & Right XLR
• Voltage Operation: DC 5V, 500mA Power Supply included and Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm

User questions & answers

Question:	I want to use on a dedicated subwoofer amp. What is the frequency response of this unit
Answer:	Frequency response does not matter. This unit is a meter that measures signal strength/level - which is apples and oranges to frequency response. It will work fine with your subwoofer but don't hook it up to the power outputs from the amp - hook it up to the signal going into the power amp.
Question:	Can you hook xlr to rca(for the stereo receiver)? True probably go just rca ro rca but that wont be as much fun
Answer:	Yes, XLR is positive, negative and shield. Depending on signal direction. If xlr to rca shield would only connect at xlr. If rca to xlr shield would be connected to rca negative post. When shield is connected to sorce connector only it creates a shield to block interference along the cable.
Question:	So which 5v power supply is included? (usa
Answer:	Standard . 5v to 120v
Question:	Can this be used with a bass amp
Answer:	Be warned... it is NOT accurate (flat) with regard to bass frequencies. It works down to around 50 Hz, but at 30 Hz response is down and at 20 Hz it's WAY down. Something to be aware of.

Product features

DB Display MKII

The all metal DB Display MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system.

The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

Product description

The Gator Cases GR Series rack cases are manufactured to withstand the rigors of the road! Made with a lightweight polyethylene frame and sturdy aluminum valiance; these cases will protect your rack gear from the damage and destruction that can occur in between gigs! The GR Series rack cases 19.25” rack-able depth is design to hold both, shallow and deep sitting gear. The recessed carry handles are design to provide comfort while moving your gear around. The Gator Cases GR series rack case also comes with front and rear rack rails, as well as heavy-duty twist butterfly latches. The Gator GR series rack cases are available in 2U, 4U, 6U, 8U, 10U and 12U sizes. The GRR series includes the rolling GRR series rack cases in 4U, 6U and 8U sizes. The Gator GR Shallow series rack cases are available in 2U, 3U, 4U, and 6U rack sizes. The GR and GRR series rack cases were designed to provide solid protection for the gear mounted within them. Gator Cases understands that your gear is important and needs to be protected. This is why our designers designed these lightweight rack cases to withstand impacts but also lightweight for easy transport. The front and rear rack rails are also designed to be easily replaceable and support your gear with ease! Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Lightweight ABS Construction with Heavy Duty Twist Latches
• Standard 19", threaded and field replaceable 7mm zinc-plated steel rack rails
• Removable Front and Rear cover for access to Front & Rear rack rails
• One pack of 48 Gator Rack Screws included
• 19.25" Rack Depth / 2U Rack Size (14")

User questions & answers

Question:	What is the measurement from rack mount ( Where you would place screws, excluding the cover) to the back
Answer:	It's not, you might can get the mounting hard ware for that. But as it comes no.
Question:	Will this fit in an overhead bin on a flight
Answer:	There is no fan in the mixer. Any fan noise will come from the power amp
Question:	Looking to build an amatuer radio go box, 6u shallow. is this series the way to go, or is the pro series better suited
Answer:	yes.!
Question:	Would this gator shallow gr-4s case fit a hartke lh1000 bass head
Answer:	Just bought my refurbished model, AMX-7333 and all mic channels work fine. I used a Thumb Drive to play some tracks and even connected my Android Phone via Bluetooth and played some saved Youtube tracks thru the headhpones. This will come in handy using this mixer with my JBL EON ONE powered array speaker at my bands gigs for break music.

Product features

Heavy-Duty Hardware

Heavy Duty Chrome Plated Hardware, Twist Latches per Lid.

Removable Front and Rear Covers

Front and Rear Covers Detach for Easy Access to Front and Rear Rack Panels

Carry Handle

Comfortable Ergo-Style Handles on Each Side of the Case

Backplate Threaded Rack Rails

Backplate Threaded Rack Rails Included - No Need for Cage Nuts

Gator Cases Lightweight Molded 8U Rack Case with Heavy Duty Latches; Standard 19.25" depth, 8U (GR-8L)

The Gator Cases GR Series rack cases are manufactured to withstand the rigors of the road! Made with a lightweight polyethylene frame and sturdy aluminum valiance; these cases will protect your rack gear from the damage and destruction that can occur in between gigs! The recessed carry handles are design to provide comfort while moving your gear around. The Gator Cases GR series rack case also comes with front and rear rack rails, as well as heavy-duty twist butterfly latches. The Gator GR series rack cases are available in 2U, 4U, 6U, 8U, 10U and 12U sizes. With Each of these having a GRR Rolling Counterpart. We also offer Shallow Models which are available in 2U, 3U, 4U, and 6U Sizes.

Product description

The Gator Cases GR Series rack cases are manufactured to withstand the rigors of the road! Made with a lightweight polyethylene frame and sturdy aluminum valiance; these cases will protect your rack gear from the damage and destruction that can occur in between gigs! The GR Series rack cases 19.25” rack-able depth is design to hold both, shallow and deep sitting gear. The recessed carry handles are design to provide comfort while moving your gear around. The Gator Cases GR series rack case also comes with front and rear rack rails, as well as heavy-duty twist butterfly latches. The GRR series includes the rolling GRR series rack cases in 4U, 6U , 8U and 10U sizes. The Gator GR series rack cases are available in 2U, 4U, 6U, 8U, 10U and 12U sizes. The Gator GR Shallow series rack cases are available in 2U, 3U, 4U, and 6U rack sizes. The GR and GRR series rack cases were designed to provide solid protection for the gear mounted within them. Gator Cases understands that your gear is important and needs to be protected. This is why our designers designed these lightweight rack cases to withstand impacts but also lightweight for easy transport. The front and rear rack rails are also designed to be easily replaceable and support your gear with ease! Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Lightweight ABS Construction with Retractable Tow Handle, Wheels, and Heavy Duty Twist Latches
• Standard 19", threaded and field replaceable 7mm zinc-plated steel rack rails
• Removable Front and Rear cover for access to Front & Rear rack rails
• One pack of 48 Gator Rack Screws included
• 19.25" Rack Depth / 2U Rack Size (14")

User questions & answers

Question:	what's the warranty on this product
Answer:	Hello, You will need to check with the airline you will be flying with. They will be able to assure you if the case will fit in their overhead bins. Here are the dims for the exterior of the GR-2S. Exterior Length 17.5 " Exterior Width 21.5 " Exterior Height 6 " Exterior Weight 9 lbs If you have any questions, please feel free to reach out to us at [email protected]. Thanks!
Question:	Does this case roll through grass well? Looking to use it in a park regularly
Answer:	I think it's reasonable light weight, but after adding a metal shelf to hold the radios, and a power supply, atu, and an ft-891 and signalink it got a bit heavy. Still lighter then my buddies pro case with similar equipment and an icon 7300.
Question:	Can you mount a shallow server computer in this case
Answer:	Don't know about the Hartke H1000, but my Hartke HA3500 is about 14 1/2" deep and didn't quite fit in GR-2S I bought. Even though the case has a "rackable depth" of 14 1/2" that refers to how deep it is with the rear lid on which adds 2" of clearance. Otherwise, without the back lid on, the internal depth of the case itself is 12 1/2". So the rear end of my Hartke stuck out the back of this case by 2" (looked kinda funny) and while the lid just barely fit over those 2" when attached, it was tight, making contact with the back end of the amp. Not ideal. My suggestion is to measure the depth of your amp - from front mounting plate to the far physical extreme of the back end (including any protrusions, like fan housing, etc.) and if it's any more than 14 1/2", this case probably won't work. Hartkes are great amps, but hard to find practical cases for them; the Gator's regular GR-L series cases would work, but are quite large - overkill for the amp by itself. Hope this helps, and good luck.
Question:	What is the distance in inches from the front rail to the rear rail
Answer:	It counts on you to handle it at each channel.

Product features

Heavy-Duty Hardware

Heavy Duty Chrome Plated Hardware, Twist Latches per Lid.

Removable Front and Rear Covers

Front and Rear Covers Detach for Easy Access to Front and Rear Rack Panels

Carry Handle and Pull Handle

Comfortable Ergo-Style Recessed Handles on Each Side of the Case with Retractable Pull Handle and Inline wheels

Backplate Threaded Rack Rails

Backplate Threaded Rack Rails Included - No Need for Cage Nuts

Gator Cases Lightweight Rolling 8U Rack Case with Heavy Duty Latches, Retractable Tow Handle, and Recessed Wheels; Standard 19.25" depth, 8U (GRR-8L)

The Gator Cases GR Series rack cases are manufactured to withstand the rigors of the road! Made with a lightweight polyethylene frame and sturdy aluminum valiance; these cases will protect your rack gear from the damage and destruction that can occur in between gigs! The recessed carry handles are design to provide comfort while moving your gear around. The Gator Cases GR series rack case also comes with front and rear rack rails, as well as heavy-duty twist butterfly latches. The Gator GR series rack cases are available in 2U, 4U, 6U, 8U, 10U and 12U sizes. With Each of these having a GRR Rolling Counterpart. We also offer Shallow Models which are available in 2U, 3U, 4U, and 6U Sizes.

Product description

The Gator Cases GRB Series rack bags are manufactured to protect and be lightweight enough to carry around town! Made with a 9mm plywood interior frame covered in a padded 600 Denier nylon; these cases will protect your mountable FX processors, bass or guitar amp heads, compressors, or EQs, or any other gear from the damage and destruction that can occur in between gigs! The heavy duty shoulder strap and the reinforced padded carry handles on the GRB rack bags allow for easy toting. The Gator Cases GRB series lightweight rack bags have a 14” rack-able depth and is designed to hold shallow mounted gear. Access to gear is quick and easy with the zip flap on the front and rear of the bag. The Gator Cases GRB series rack bag features a generously large accessory pocket for storage.

The Gator GRB series rack bags are available in 2U, 3U, and 4U rack sizes. The GRB series rack bags were designed to provide solid protection at an inexpensive price. Gator Cases understands that your gear is important and needs to be protected. This is why our designers designed these lightweight rack bags to withstand impacts but also lightweight for easy transport. The front and rear rack rails are also designed to be easily replaceable and support your gear with ease!

Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Lightweight 9mm Plywood Rack Covered in 600-Denier Nylon
• Large Outside Accessory Pocket
• Padded Carry Handles with Removable Shoulder Strap
• Front Threaded Rails and Zippered Rear Access
• 14" Rackable Depth / 3U Rack Size (5.25")

User questions & answers

Question:	Hi can you mount black magic atem HD with Black magic recorder on this rack using the rack shelf from black magic
Answer:	The case is made to be pulled on a flat hard surface. I would not recommend pulling it over grass, the wheels are way to small for that type of thing.
Question:	Will gear exactly 14" deep from front face to back face fully fit inside this bag (when screwed to the rails
Answer:	Hello, this would depend on the dimensions of your Server Rack. We would recommend measuring your gear and comparing it to the interior dimensions of the GRR-10L. Check out The GRR-10L interior dimensions below. Width: 19" Length ( Rail to Rail): 16.75" Length ( Rail to Rear Lid): 19" Height: 17.5" If you've got any questions, feel free to reach out to us at [email protected]. Thanks!
Question:	Will an origin chronos fit and be protected in this bag? dimension of the origin chronos is 14 x 12 x 4 (inch
Answer:	It is 17" from the external facing side of the front rails to the external facing side of the back rails.
Question:	Is there a way to run cables out the back or do they have to come out the frunt
Answer:	INTERIOR DIMENSIONSInterior Length: 12.25 "Interior Width: 19.00 "Interior Height: 3.50 "

Product features

Lightweight Protection

Constructed of a 9mm plywood interior frame covered in padded 600 Denier nylon the GRB Series Protects Rack-Mountable gear such as Amp Heads, compressors, EQs, or FX Processors.

Front and Rear Access

Full access to gear is quick and easy with zippered front lid and rear access port.

Adjustable Shoulder Strap

The heavy duty shoulder strap and the reinforced padded carry handles on the GRB Series also allows for easy toting.

Zipper Storage Pocket

Large zippered storage pocket is perfect for cables and power supply. Includes cable management loops.

Gator Cases Portable 3U Rack Bag with 14" Rackable Depth; (GRB-3U)

The Gator Cases GRB Series rack bags are manufactured to protect and be lightweight enough to carry around town! Made with a 9mm plywood interior frame covered in a padded 600 Denier nylon; these cases will protect your mountable FX processors, bass or guitar amp heads, compressors, EQs, or any other gear from the damage and destruction that can occur in between gigs! The heavy-duty shoulder strap and reinforced padded carry handles on the GRB rack bags allow for easy toting. The Gator Cases GRB series lightweight rack bags have a 14” rack-able depth and is designed to hold shallow mounted gear. Access to gear is quick and easy with the zip flap on the front and rear of the bag. The Gator Cases GRB series rack bag features a generously large accessory pocket for storage. Available in 2U, 3U, and 4U rack sizes

Product description

The Gator Cases GRC-12X10 PU, 12U top, 10U bottom mixer console rack is designed to organize your portable live sound, or portable recording rig into one easy to pack system. The 12U top space can hold a mixer up to 12 units deep and allows the mixer to be angled to a desired position comfortable for the sound engineer. The unique pop-up ratcheting system allows the mixer to be angled and lowered for transport. The bottom 10 units can be used for compressors, amplifiers, effects processors, wireless microphone systems, or storage rack drawers. The durable polyethylene plastic case also includes exterior side lifting handles, 4” heavy duty casters, 2 of which are locking, and removable top, front, and rear lids.

The Gator Cases GRC-12X10 PU pop up mixing console rack interior dimensions are: 12U top interior rack-able space: 21” Width 19” (standard rack size) top interior depth: 5” (Mixer section) 10U bottom rack-able space Interior Height” 17.5” Rack-able depth to rear rack rail: 24.25” Rack-able depth to rear lid: 26.75” Width 19” (standard rack size) and is designed to fit mixers by manufactures such as PreSonus, Mackie, Behringer, Yamaha, Samson, Allen & Heath, Peavey, Pioneer, and many others.

Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of products with a variety of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Mobile audio 19" console rack with pop-up top-loaded rack
• High-density polyethylene construction
• Top rack uses a pop-up ratchet system for transporting flat then elevating to various angles
• Threaded rack rail
• 4" heavy-duty industrial caster, 2 of which are locking

User questions & answers

Question:	Will this mount a 19" mixer
Answer:	NO REALLY, WILL BE STRUGGLE ... IF YOU HAVE CABLES AROUND IN AND OUT, IN ORDER TO FIT 14" YOU WILL NEED TO TAKE OUT YOUR CONNECTION AND PLUGIN CABLES .
Question:	I'm looking for a slant top that will accommodate a qsc touch mix 30. all of the inputs and outputs are on the back. will this work
Answer:	This isn't really a bag, it's a lightweight soft-shell rack. I took a look at the chronos website, and the origin model does not appear to be rack mountable, so this would not work.
Question:	So this is really a 10U top and 8U bottom
Answer:	From: AJ Gutierrez Date: June 14, 2013, 10:21:25 AM CDTTo: Bill Nickol Subject: Re: Fwd: Sharon: Can you answer this question about Gator 4U Audio Rack Bag...?The cables can just as easily be run through the front of the portable rack bag. Other questions?
Question:	Will this mount a 22" wide peavey pv20usb mixer
Answer:	Hello, All Gator Cases come with a limited lifetime warranty. For details please reach out to us at [email protected]. Thanks!

Product features

Pop-Up Audio Mixer Console Rack

The Gator Cases 12 space audio mixer console rack is designed to make set-up and break down simple. The top 12U mixer section angle adjusts to the users desired angle and locks into place providing the desired comfortable mixing positions. The strap attached to the top of the 12U mixer section is used to lift and lower the mixer into position. Simply lift up when the mixer is completely lowered to find the right angle, when finished, lift completely up and place back down to the lowest level for transport or storage.

Roll, Plug, and Play. ..

The Gator Cases GRC-12X10 PU pop-up console rack includes features that are designed to convert a live sound rig into an organized, portable system. These features include 4-inch blue heavy-duty casters, 2 of the 4 are locking casters to prevent the console rack from rolling during transport or use, sturdy side handles for lifting the console rack, spring-loaded butterfly latches, and field replaceable rack rails. The Gator Cases mixer console rack saves time for set-up and breakdown while protecting the expensive gear!

Light Weight, Compact Design

The Gator Cases console rack is also designed to be compact for easy storage or transport. This is an everything in one system that allows you to roll it out, remove the lids, plug in the microphones and speakers, and set up is finished! When packing up, unplug, put the lids on and roll away in one trip! The light weight yet sturdy design also helps keep the weight down when lifting is required. These features make the Gator Cases GRC-12X10 PU the best choice when a live sound system is needed for public speaking, theater rigs, performances, gigs, or practices.

Product description

The TASCAM TA-1VP vocal processor was co-developed with Antares Audio Technologies to bring together everything you need for a polished, modern vocal sound. The rackmount processor includes a microphone preamp, compression, de-essing, microphone & tube modeling and Antares’ world-famous Auto-Tune™ pitch correction. Perfect for live performance, house of worship or studio use, the TA-1VP brings your vocal sound into the 21st century. A high-quality XLR microphone input is provided on the TA-1VP front panel, with phantom power for condenser mics. Processing is laid out in simple-to-use blocks on the front panel, each with dedicated buttons and meters to show you exactly what’s being done to the signal. Antares’ microphone and tube modeling takes the input signal and gives it the character of another microphone, with a library of classics to choose from. The De-essing module removes sibilance from your signal before variable-knee compression and gating. A great-sounding digital EQ is last in the chain before output. The Auto-Tune module can be set for any level of pitch correction, in a variey of user-selectable scales. All settings can be recalled through presets on the front panel or through MIDI. Balanced TRS input and outputs are located on the rear panel, including a Double Track out for simulating doubled vocals. A S/PDIF digital output is also provided. Built for every audio application from live performance to studio mixdown, TASCAM’s TA-1VP is the only hardware processor with Auto-Tune technology for flawless vocal intonation.

• Co-developed with Antares Audio Technologies to bring together everything you need for a polished, modern vocal sound, in the studio or live
• The rackmount processor includes a mic preamp, compression, de-essing, mic & tube modeling and Antares’ famous Auto-Tune pitch correction
• Perfect for live performance, house of worship or studio use, the TA-1VP brings your vocal sound into the 21st century
• A high-quality XLR microphone input is provided on the TA-1VP front panel, with phantom power for condenser mics
• Balanced TRS input and outputs are located on the rear panel, including a Double Track out for simulating doubled vocals
• Processing is laid out in simple-to-use blocks, each with dedicated buttons and meters to show exactly what’s being done to the signal
• The Auto-Tune module can be set for any level of pitch correction, in a variey of user-selectable scales

User questions & answers

Question:	How will this help a person who raps and doesnt sing
Answer:	It is dominantly for tuning sung notes, so my impression would be not that much. However, if you sing a FEW notes while rapping, you can get that mechanized sound as you change pitch if you set it for aggressive tuning. In addition, as a vocal processor there are some fun effects to play with.
Question:	I have a zoom r16 recording machine...can I plug this into my zoom and use it that way? Will I hear the vocals in my head phones like plugging in a no
Answer:	This machine has a line output, you need a tr 44 connection. Which basically is a really big headphones jack. That plugs into your mixer. Then it goes to your DAW. If you have the setting in your DAW to hear yourself life then all is good
Question:	Hello everyone, I have 2 tascam ta-1vp, but as soon as I activate the auto-tune function has the speed of correction to 0, my voice crackling
Answer:	The speed correction is not universal. Each program has to be saved with its own speed correction.
Question:	Can this be used for the studio
Answer:	Yes this unit works best in a studio environment.

Product features

TA-1VP

The TASCAM TA-1VP vocal processor was co-developed with Antares Audio Technologies to bring together everything you need for a polished, modern vocal sound, in the studio or live. The rackmount processor includes a microphone preamp, compression, de-essing, microphone & tube modeling and Antares’ world-famous Auto-Tune pitch correction. Whether you want gentle, transparent pitch correction or the full-strength effect that's required for pop or hip hop vocals, the TA-1VP delivers this sound for you on stage. Perfect for live performance, house of worship or studio use, the TA-1VP brings your vocal sound into the 21st century.

A high-quality XLR microphone input is provided on the TA-1VP front panel, with phantom power for condenser mics. Processing is laid out in simple-to-use blocks on the front panel, each with dedicated buttons and meters to show you exactly what’s being done to the signal. Antares’ microphone and tube modeling takes the input signal and gives it the character of another microphone, with a library of classics to choose from. The De-essing module removes sibilance from your signal before variable-knee compression and gating. A great-sounding digital EQ is last in the chain before output.

The Auto-Tune module can be set for any level of pitch correction, in a variey of user-selectable scales. All settings can be recalled through presets on the front panel or through MIDI. Balanced TRS input and outputs are located on the rear panel, including a Double Track out for simulating doubled vocals. A S/PDIF digital output is also provided.

Built for every audio application from live performance to studio mixdown, TASCAM’s TA-1VP is the only hardware processor with Auto-Tune technology for flawless vocal intonation.

Product description

ATA Molded PE Slant Top Console Rack; 10U Top; 4U Bottom

• Lightweight polyethylene construction
• Chrome plated corner protectors
• Recessed side handles
• Rear wire access
• Heat treated bolts with protective washers included

User questions & answers

Question:	I have a mackie profx 12v2 mixer and planning on buying some ears to make this a mounted board. Will that fit on the top rack
Answer:	Yes, using the CV and Gate.
Question:	Does it fit for a yamaha mgp16x 16-channel mixer
Answer:	Probably not. I have both types of stands, and the hole locations are different due to the Moog skiffs being deeper. The mounting holes are the same, it’s the hole openings for the bottom that are different.
Question:	Does this have rear rails
Answer:	My opinion is that the stand will be fine in that use case: it's very solid and well constructed. I have a Neutron and a Model D in mine (top row and bottom row).
Question:	Does a presonus 16.4.2 fit in this case
Answer:	A couple of questions...is it a powered mixer? How wide is it with the rack mount attached? Are the XLR jacks on the top or back? What is the make & model of your mixer? Armed with this info, I may be able to give you a "yes" or ""no" answer.
Question:	Does this one come with 120v or 240v power supply since it’s being shipped from the UK
Answer:	Hello, Yes the Touch Mic 30 should fit in the GRC-12X10 PU Rack case. However, you will need the Rack Mounting pieces from QSC in order to mount it. Thanks!
Question:	Will this connect to an arturia minibrute 2 just through the patch sections? im thinking it should, both being 3.5 mm. or will i need other component
Answer:	It actually has a 12U top and 10u sides, the description is a little messed up.
Question:	Will my Moog 104 skiff fit into this rack
Answer:	No only a 19" mount
Question:	If I mount 2 neutrons, can I mount them in the top 2 tiers or will the lack of weight on the bottom cause the stand to be off balance
Answer:	Yes! That shelf is short and doesn’t require any rear rack rails; which is a good thing because this rack doesn’t have any.

Product features

EURORACK STAND (3-TIER)

• 3-tier stand ideal for Behringer Eurorack-style synthesizers and other equipment
• Mount any combination of 3 units for maximum synthesis capabilities

EURORACK STAND (3-TIER)

The EURORACK STAND (3-TIER) is ideal for any Behringer Eurorack-style synthesizer or equipment. Any combination of 3 units can be mounted to be able to meet your synthesis needs. Whatever size setup you have, the EURORACK STAND (3-TIER) can handle it with its variable design that can accommodate 70, 80 and 104 HP chassis with the use of an adjustable rear brace. The inclusion of rubber feet ensures rock-solid stability for a wide range of surfaces. Whether in the studio or on the road, the EURORACK STAND (3-TIER) is the ideal way to have all your gear right where you need it.

Product description

ATA Wood Flight Rack Case; 8U; 17" Deep

• 9mm plywood construction with PVC exterior
• Red recessed twist latches and spring-loaded rubber-gripped handles
• Heavy-duty commercial grade plated hardware and reinforced stackable ball corners
• 3.2mm thick front & rear rack rails

User questions & answers

Question:	Are the casters permanently attached or are they removable so the case can be set on a table for operation
Answer:	Hello, The Yamaha MGP16X will not fit into the GRC-10X4. This is because the MGP16X is a 11U Mixer;since we do not make 11U cases, you would need a 12U case like the GRC-12X10. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!
Question:	Is there room in the back to store extra/standard power cables
Answer:	no rails; ATA Molded PE Slant Top Console Rack; 10U Top; 4U Bottom Lightweight polyethylene construction Chrome plated corner protectors Recessed side handles Rear wire access Compact size for easy transport Heat treated bolts with protective washers includedInterior Dimensions Interior Length: 20.00 " Interior Width: 19.00 " Interior Height: 7.00 "
Question:	Is this case shippable? Has anyone used a freight carrier with these before
Answer:	Interior Dimensions Interior Length 20 " Interior Width 19 " Interior Height 7 " plus 5% with promo code: GAT5PROM with us
Question:	What are the dimensions of this item
Answer:	The power adapter has a plug that is specific to the region that it is shipped from. You will probably need to get an equivalent one for your region.

Product description

ATA Molded PE Rack w/ Casters; Fits Under Gator GRC Series; 14U; 21" Deep

• Lightweight polyethylene construction
• Fits under any GRC rack or standard rack
• Heavy-duty twist latches
• 4 wheels, 2 locking

User questions & answers

Question:	Will this hold an ampeg svt classic on the bottom, and if so how many unit spaces owuld still be available
Answer:	Yeah, I would say so. I had my case full of units and still was able to store a couple coils. Just as a heads up, I flew with the case once and the black feet broke off. The second time I flew, a wheel chipped off. I sent the case back to Amazon within 2 weeks.
Question:	But can i get complete rack with all equipment from you
Answer:	it would ship via truck freight, we ship it for free plus 5% with promo code: GAT5PROM with us
Question:	Will it come with all those iquipments
Answer:	about 20.75" wide from edge to edge of the case but the ball corners will make it about 21.5" total width. 35.5" tall with casters installed or about 30" tall without. Front to back the case is 19.25" but the caster plate at the bottom is about 22.75" without the doors on, 26.5" with doors on, but the ball corners will again add about .75" to that. All depends on what you are stacking around it as to what dimensions you will find the most useful. Hope that helps.
Question:	Will it come with all those equipment
Answer:	Hello, According to dimensions we've found online - the Mackie ProFx12v2 should fit just fine in the 10U portion of this case. You should have 2U left as well, which can be covered using a rack panel from our Rackworks line of rack accessories. If you have any other questions, please feel free to reach out to us at [email protected]. Thank you!

Product description

The Gator Cases U.S.A. Made, rotationally molded G-PROR Series rolling rack cases are manufactured in our Indiana facility to withstand the rigors of touring. Made with virtually indestructible roto-molded polyethylene; these rolling rack cases will protect your rack gear from the damage and destruction that can occur in between gigs! The 19” rack-able depth is design to hold both, shallow and deep sitting gear. The molded-in ergonomic carry handles are design to provide comfort while moving your gear around. The retractable tow handle and inline wheels make rolling the rack full of heavy gear from gig to gig a breeze. The G-Pro series rack case also comes with front and rear rack rails, as well as recessed twist latches. The Gator G-PROR series rolling rack cases make mounting and transporting power amps, compressors, EQs, effects processors, reverb units, rack mountable mixers, and other rack mountable gear less of a hassle.

The Gator G-PROR series rack cases are available in 4U, 6U, and 8U rack sizes. The G Pro series also includes the rolling G-PROR series rack cases in 4U, 6U and 8U sizes. The G-PRO and G-PROR series rack cases were designed to provide solid protection for the gear mounted within them. Gator Cases understands that your gear is important and needs to be protected. This is why our designers designed the cases polyethylene frame to withstand impacts but maintain lightweight for easy transport. The solid rack rails are also designed to support your gear with no problem!

Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Heavy-Duty Rolling Rack Case Made from Indestructible Roto Molded Polyethylene Plastic
• 19" Rackable Depth / 6U Rack Size (10.5")
• Penn-Elcom MOL Recessed Twist Latches with Black Powder Coated Finish
• Front and Rear Removable Lids with Molded-in, Ergonomic Side Carry Handles, Retractable Tow Handle & Recessed Wheels
• Made in the USA from Recycled Plastic

User questions & answers

Question:	Do the wheels or handle intrude into the interior/usable rack space, or are they recessed enough to allow full use of all rack space
Answer:	Hello, We do not offer Rack Case and Rack Gear Bundles at this time. We apologize for the inconvenience. Please feel free to reach out to us at [email protected] with any other questions. Thank you!
Question:	does it have rack mounts on the front and back
Answer:	Hello. This is for the rack case unit only. It does include rack screws to mount any standard 19” rack mount equipment. Thanks!
Question:	Can the g-pror series be stacked interchangeably with the standard grr series cases or no
Answer:	Hello, The GRC-BASE-10 does not come with the equipment pictured. The equipment shown in the picture is just to show how your gear would fit in the case. If you have any other questions, please feel free to reach out to us at [email protected]. Thank you!
Question:	DOes the front lid have enough pace to leave xlr cables plugged into my rack mount mixer
Answer:	Hello, The casters are not permanently attached. They will arrive within the case and can be bolted onto the caster board base of the case when needed. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!

Product features

Heavy-Duty Hardware

Heavy Duty Black Powder Coated Hardware, Twist Latches per Lid

Removable Front and Rear Covers

Front and Rear Covers Detach for Easy Access to Front and Rear Rack Panels

Molded Carry-Handle with Pull Handle and Wheels

Molded Carry-Handles on Each Side of the Case as well as Retractable Pull handle and Inline wheels

Threaded Rack Rails

Threaded Rack Rails Included - No Need for Cage Nuts

Gator Cases Pro Series Rotationally Molded 6U Rolling Rack Case with 19" Depth, Tow Handle & Recessed Wheels; Made in USA (G-PROR-6U-19)

The Gator Cases GR Series rack cases are manufactured to withstand the rigors of the road! Made with a lightweight polyethylene frame and sturdy aluminum valiance; these cases will protect your rack gear from the damage and destruction that can occur in between gigs! The recessed carry handles are design to provide comfort while moving your gear around. The Gator Cases GR series rack case also comes with front and rear rack rails, as well as heavy-duty twist butterfly latches. The Gator GR series rack cases are available in 2U, 4U, 6U, 8U, 10U and 12U sizes. With Each of these having a GRR Rolling Counterpart. We also offer Shallow Models which are available in 2U, 3U, 4U, and 6U Sizes.