8 best foam sound insulations

• Product Features--This large piece of foam insulation sheet is a non-crosslinked closed-cell structure foam rubber.This new type of material has good sealing performance, will not deform, and can be used in the temperature range of -150℃-50℃.
• Good shock absorption and cushioning --The high-density sponge foam is very suitable as a cushion or cushion. It is widely used in car carpets and garage side protection, which can protect your car well. It can also be used for audio pads and toolbox linings to reduce noise.
• Anti-slip and Waterproof--The unique closed cell structure of this foam rubber also has anti-slip and waterproof properties. Use it in your cabin and deck, you no longer need to worry about damage caused by slips and falls. Wrapped it in the fuel tank and motor for effective insulation.
• Multi-purpose DIY material--This foam rubber board can be used for clothing, role playing and interior decoration. You can use it for great art and craft projects! Easily cut out the right size to fit your furniture and protect the floor. As a floor mat, your pet will like to stay on the foam rubber sheet.
• Adhesive installation instructions--The back of the Craft foam insulation film will be covered with a layer of white release paper. During the installation process, you can easily remove the surface release paper and stick it on the surface of the product that needs to be sealed, it's that simple. Note: The bonding surface needs to be dust-free, degreased, water-free, and the bonding surface is flat.

• ★ Good Sound Absorption Characteristics - If you are mixing music in a recording studio, you have to reduce ambient sound. Any unwanted noise can ruin the recording. However, if you’re assembling your own studio, you want acoustic foam panels that are effective enough for you to get great sound, but affordable enough that you can fully insulate the studio against the excessive noise. Acoustic Foam Panels absorb sound generated at low, mid and high frequencies, making them perfect for recording.
• ★ Quality - You may be concerned that our acoustic soundproof foam is so lightweight and affordable, it’s of lower quality than other acoustic foam panels on the market. Rest assured, our Acoustic Foam Panels are made with flexible, professional grade acoustic foam, designed for quality sound absorption in a wide variety of soundproofing situations. The foam is consistent in density and firmness, so sound absorption will also be consistent.
• ★ Value - Acoustic Foam Panels are so popular, because they are the most cost effective, studio grade sound absorbing product. Our design requires less material and truly lightweight, so we can afford to lower cost of soundproof foam panels and offer them at competitive price compare to other brands. This can be very important in situations where you have to cover a large area with acoustic material, such as a studio or a home theater with limited budget.
• ★ Ease of Installation - If you’ve ever seen our soundproof foam before, then you know how easy is to work with. Since, it’s not a high-density foam, you won’t have to wrestle with to get it where they need to go. Acoustic Foam Panels are lightweight and can be attached to a variety of surfaces. No special tools or materials are needed for installation.
• ★ Commercial installations are endless. Whether you are a contractor, architect or simply a homeowner looking for a handy solution to a noise problem, you can count on Acoustic foam panels. We have all of the sound foam, sound panels needed to minimize noise in and around your property. Sound insulation will compliment any project.

• 3D ACOUSTIC DESIGN: Our 2 inches foam provides moderate sound control on walls or ceilings. Perfect for individuals to reduce and absorb unwanted echoes, waves, reverb, and flutter echoes.
• ENVIRONMENTAL PROTECTION: Made up of environmentally friendly polyurethane foam at 50/lbs per cubic yard, the acoustic panels not only have effective sound absorption characteristics but also will not cause any harm to our body.
• QUICKLY RECOVER TO NORMAL SIZE: Open the Vacuum package, put the foam panels in a ventilated place about 24-48 hours. Another method is soaking the foam in water for one minute then wringing the foam out of the water, then dry air it or use a hairdryer. You can also let them simmer under the sun as well!
• WIDE USE: Great for spot treating sound on walls in your studio or office - For use in recording studios, control rooms, Offices home studios, home entertainment theaters, Home Offices. Easy to shape and cut to size, altering won’t affect performance.
• AFTER SERVICE WARRANTY: Our US-based customer service means that you can trust that if you’re not satisfied for any reason, you can get a hassle-free refund or replacement.

User questions & answers

Question:	Will these help absorb the stomping vibrations from upstairs neighbors
Answer:	The panels do not have an adhesive back. Therefore, I recommend you use 3M 77 adhesive spray. Spray the back of the panel and the cleaned cement wall. Once the adhesive on the panel and wall is almost dry to the touch, simply place on wall with a gentle press.
Question:	Will these make you quieter to a neighbor
Answer:	While these do help in soundproofing, these panels are meant to control acoustics for home and professional studios and other audio engineering needs. We wouldn’t recommend this product to help control noises from outside.
Question:	How can I air these out once they are already on the wall? And is the “new” smell something I should worry about health wise
Answer:	Sound travels. In a room it bounce off the walls. These sounds can be vocal, or musical, from musical instruments to a stereo sound system. The foam prevents sounds from getting into a room whereas recording is taking place so that no outside sounds enters the room or on the recording.
Question:	How do you know that you are authentic
Answer:	12 panels - total of 12 square feet.

Product features

Acoustic Column Wedge Foam Studio Corner Wall Foam Block

Acoustic foam panels feature a>

An affordable choice for soundproofing a room of any size, our wedges , convoluted , bevel or hexagon , acoustic foam panels is easy to shape and cut to size. At the same time, they offer a level of rigidity and consistent firmness that delivers long-term durability, even in busy recording studios enclosed with sound music, voices of a bus, or one night conversations about night.

These sounds enter our living space and work through the ways everyone knows, such as windows, doors, floors, walls and ceilings. To reduce the volume, you must create an obstacle to it or moderate it. Well, the news is that many new apartments are gradual to prevent sound penetration. But your apartment may not be older and have facilities like new ones.

There are two main ways to create a quiet environment and sound therapy:

• Adding levels that the sound or its echoes are attracted to before our waves reach their ears.
• Create a barrier to voice input.

Professional Studio Grade Acoustical Treatments, Create Beautiful Recording Environments!

• Acoustic foam is used to remove reverberation and sound reflections, provide sound insulation industrial and domestic applications suitable for sound studios. Unlike polyurethane foam, fiberglass and rock wool have health risks.
• This product can be used as acoustic cover for walls, ceilings and doors and other various places such as theaters or movie theaters, recording studios, and other busy and crowded places such as gyms, subways, stations, offices, schools, and other areas.
• This product is great for voice and video recording.
• Effective sound deadener for standing waves and flutter echoes, especially when used with our corner bass traps and corner blocks.

Great for Decoration or Professional Applications.

• This foam is ideal for spot-treating production studios, practice rooms or home entertainment centers.
• Also, this foam helps with smaller agitation echo complications.
• For decorative purposes, wedges, egg crates and pyramids can also be arranged side-by-side with the acoustic bass traps, corner bass traps tramp and other bass acoustic foam.
• It also reduces slap-back and room ring when used in medium-sized areas like isolation booths, recording booths, control rooms, and sound studios.

Product description

Description:

Insulation Mat Acoustic Dampening Heat, Sound deadener Sound Proof Sticker

100% Brand New

Metal: PE with aluminum and self-adhesive

Covered with Aluminum foil

Thickness: 6mm

Strong sound insulation and absorption performance, heat insulation, damping and antisepsis

Reducing energy consumption with the strong performance of heat insulation

Strong self-viscous performance

Strong shock resistance

Making sound more centralized and harmony by changing the way of sound transmission

It can take the heat of the engine evenly distributed to avoid overheating the lid.

Keeps your interior cooler in the summer and warmer in the winter.

Effectively blocks 97% of radiant heat transfer.

Reduces unwanted sound and most vibrations.

Installation:

Remove the door panels

Install the screws back in original place, it will easy be found when you mount, avoiding holes be covered

With a roller, tools will make insulation materials and sheet metal firm fit, and play the best adhesive, damping performance

According to the effect you want to choose the construction program, only single Soundproof/Damping Plate or single Heat & Noise Insulation Cotton or Both them.

Installation Notices:

1, Please clean the surface you want to paste.

2, Make insulation materials and sheet metal firm fit and play best adhesive, damping performance

3, Do not cover the chassis wiring or air holes when you installation

4, Appropriate use of adhesive tape will strengthen connections effect

• 100% Brand New heat shield Car Sound Deadener, PE with aluminum material, Thickness: 6mm, High-quality tri-layer, twin density lightweight foam laminate
• Strong sound deadener, sound insulation and absorption performance, heat insulation, damping and antisepsis
• Scratch-resistant. The surface high-fiber cloth is fiberglass. Heatproof. Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel
• The fireproofing grade with the mat is B2 and its distortion temperature is 200¡æ. High-temperature resistance Easy to cut & fit, strong adhesive backing, High-Quality foam rubber with Aluminum sheet 1100£¨AA£:0.1mm thickness pure aluminum / Smooth Function: Soundproof Stick: Best Self-adhesive Type: Car Deadening Material: Insulating alumina fiber &Sound insulation cotton
• Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. boot, wheel arch, body panels, load floor, under the seat, floor, interior bulkhead. Also ideal for underfloor applications as it has great load resistance properties

User questions & answers

Question:	Is this product self-adhesive or do I need something to stick it down with
Answer:	I have used this to insulate a van but gets sticky after high heat --- hard to remove. Even at room temp. may be hard to remove may get squishy. Try a test area with full walking traffic.
Question:	Can you use this product behind a dishwasher for sound insulation
Answer:	Yes sticks very good will not likely come off In a few years however I did not use it for duct insulation I used it for sound deadening
Question:	Can it work just by hanging it up against the wall? It's a company truck so I can't stick it on permanently
Answer:	No, the drum gets too hot and the adhesive would probably fail
Question:	can this be used to quite household appliances like refrigerators, washing machines ect
Answer:	It does have an adhesive side.

Product description

Specification: Total Size: 30 * 30 *2. 5cm (12"*12"*1") .Effective against standing waves and flutter echoes in most small-to-medium sized rooms. Overall NRC: 0.4 For use in vocal booths, control rooms and studios. Brand New Tile Acoustic Foam Made by Imported High Quality Foam Sound-Absorbing Foam High density acoustic foam cell structure for maximum noise absorption Helps to flutter echoes and reduce excess reflections and reverberation Improves vocal clarity and acoustics of your room Ideal for use in recording studios, home theatres and karaoke room

• good for studios, recording studios, vocal booths, control rooms.
• Used to absorb mid to high range frequencies and diminish echoes. Overall Noise Reduction Coefficien
• foam tiles perfectly aligned, professional sound quality
• Color: Black Total Size: 30 * 30 *2. 5cm (12"*12"*1") Package include: 48PACK
• Compress the packaging.High quality products.Open the package for quick recovery.6 to 12 hours.

User questions & answers

Question:	What works best for sticking these foam pieces onto a painted celing
Answer:	Every little bit will be helpful. Just do some research on more effective placement, because that is most important.
Question:	Can these be cut into other shapes if trying to make a mosaic out of them
Answer:	Hello, it doesn't come with adhesive , thank you.
Question:	how do they attach to a wall
Answer:	Umm, so, you just incriminated yourself for false advertising: "[REDUCE NOISE]: Our 3D acoustically designed 2 inch foam helps break up sound waves providing the ideal level of moderate sound control on walls or ceilings. [REDUCE REVERB]: At 50/lbs per cubic yard, these acoustic panels effectively absorb unwanted flutter echoes. Made up of non-toxic environmentally friendly polyurethane foam at 50/lbs per cubic yard:" No mention anywhere of these being used for decorative purposes. Only allegations that these reduce sound... So I'm gonna contact Amazon, and whomever else I can think of, because this is mass deceit and theft.
Question:	Can people in outside the room hear me
Answer:	No

• ✅ 【FOAM INSULATION TAPE】The foam seal tape is made from environmental protection material, CR foam, Neoprene, which has excellent sealing and resistance to deformation feature, toxic free, can be used from -50℃ to 150℃.
• ✅【FOAM STRIP APPLICATION】The adhesive foam strips are widely used in various door seal and window insulation, furniture, electrical cabinets, cars, speakers, toys, handicrafts, sports equipments, etc.
• ✅【HIGH DENSITY FOAM TAPE】Weather proof, oil resistance, resistant to corrosion, dust proof, shock-absorbing, buffering, sealing, flame retardant, shock-absorbing, sound and heat insulation, anti-skidding and insulating.
• ✅【CLOSED CELL FOAM STRIP】Adjustable and Flexible. The Neoprene sponge foam tape is easy enough to customize and cut to size with scissors or blade, and bend easily and conform to any shape.
• ✅【FOAM WEATHER SEAL】One sided foam insulation tape is designed for both industrial and commercial use. Strong adhesive backing, waterproof and non-degumming, stick firmly, great weather stripping for doors and windows.

User questions & answers

Question:	Is this grey or black
Answer:	This is for HVAC applications and not electrical. Does an amazing job blocking air flow but is not intended for electrical applications as the foil is conductive. If you want it to be conductive, such as the solder pathways on a printed circuit, I suspect the adhesive will continue to degrade over time and become more conductive. I have used the foil as a conductor for low-voltage applications such as battery powered decorations at Christmas but I am sure the engineers and legal staff at 3M would say I was using the product in a way that was not intended. If you are talking about using the tape with standard batteries, such as TWO AAA, AA, C or D batteries I think you are safe as long as fire and heat are not possible and you will be personally monitoring the circuit while powered up. If there is line current anywhere in the circuit even oh the other side of a transformer I WILL YELL DON'T, just DON'T.
Question:	Is the 1” w x 4/5” t “insulation tape” really 4/5” tall? I want a thick/tall tape so I don’t have to “stack” it
Answer:	Not sure if that would help you. But, I'd be concerned with the chemicals in the glue of the tape affecting your Python. I really don't know what a reptile setup is like, but I'd assume that if there was any direct heat on the foil the glue might emit vapors. Try and look up the temperature ratings for this tape if there are any and see if it's too low for your heat lamp, light, or anything else that might screw with the chemicals on the tape.
Question:	Can this be used on furnace door
Answer:	If you mean the slotted vent that the air comes out of on the wall or floor, no. This is for the duct work that brings the air from your HVAC unit to the vent on the wall. It is like very thick, very sticky (on one side) shiney aluminum tape to seal the seams on the metal duct work. Most modern houses now have plastic expandable duct work which this is not made for.
Question:	How can I buy in bulk? For 4 doors and 4big windows
Answer:	Yes--but be aware that the adhesive is sticky and it can be difficult to apply.
Question:	Would this work attached to a curtain room divider
Answer:	Yes it does have a peel off backing
Question:	Can these be cut to a smaller size easily
Answer:	By itself it's not going to do much good. It's very thin and mostly just for sealing seams or holes. Maybe if you wrapped it like 10 times it could help, but that's allot of tape.
Question:	I need to sound proof the outside of a kitty carrier for a plane ride. Is this product a little bendy
Answer:	It seems to have good adhesive, but wood is a different deal, I always had to really clean or sand wood to get anything to stick really helps if new or smooth, just My opinion.
Question:	Is that resist the noise from outside
Answer:	Each roll has 150 feet

Product description

Wedge surface-The wedge surface of -12 grooves increases the contact area with sound waves, and the sound absorption effect is better than other shapes of surfaces. Manufactured to Absorb standing waves and flutter for better acoustics results. High density, open-celled acoustical foam panels which absorb mid to high-frequency reflections and control the ambiance of any room. PRODUCT IS SHIPPED AS 3 TILES, EACH TILE Splits into "2 WEDGES". Once You Split - Each egg crate foam acoustic foam soundproofing Foam panels HIGHEST point reaches 1.5 inch height. Its LOWEST point reaches 1/2 inch in height. / Overall Noise Reduction Coefficient (NRC): 0.40

• PRODUCT IS SHIPPED AS 3 TILES, EACH TILE Splits into "2 WEDGES". Once You Split - Each egg crate foam acoustic foam soundproofing Foam panels HIGHEST point reaches 1.5 inch height. Its LOWEST point reaches 1/2 inch in height. / Overall Noise Reduction Coefficient (NRC): 0.40
• Smaller sound proof padding panels offer more options for placement and design / Pack of 6. Covers 6 sq. ft. (Covers 1 sq. ft. per sheet)
• Good for Craft Foam , Packing Foam , Packing Supplies , Studio Foam , High Density Foam
• Note: Can help increase sound clarity in a room or space. Great Use For Media Content (You Tubers / Music Edit & Recording, Video Gamer). Used to acoustically treat walls or, most commonly ceilings (especially if they aren't parallel to the floor) Light Weight Soundproof Foam easy can be applied on Ceilings. Soft / Flexible - even great for sound proof padding sound insulation sound dampening (Camera accessories, Go-Pro etc.)
• Passes : TECHNICAL BULLETIN CAL 117-2013: Requirements, Test Procedure and Apparatus for Testing the Smolder Resistance of Materials Used in Upholstered Furniture. CAL 117 for short, is a regulation that sets the standard for upholstered furniture flammability in the furniture industry

User questions & answers

Question:	What do you use to hang these
Answer:	Thank you for your question. It is butyl based material, with 0 asphalt used in it.
Question:	I want to build a sound sheild box for my marine generator on my boat is this the right foam
Answer:	Thank you for your question. We always recommend to use Siless Vibro(50-80 mil) together with Siless Liner(157-314 mil) to achieve the best sound deadening result. First layer of Vibro and Liner on the top of it as a second layer.
Question:	Can this block neighbor's loud parties
Answer:	No it does not come with the roller. There is a descent set on amazon for like $25 that works well and has several types of rollers in it.
Question:	Do these need to be hung on open wall or can they be hidden behind furniture, under bed, etc. Would it still be effective if placed that way
Answer:	These are relatively smooth but not as smooth as a foam mattress.

• 【Easy to Install】These studio sound absorbing panels can be used to cover for walls, ceilings and doors, just easy to use as attach it with staples, nails, screws, tacks, Double-sided tape or glue.
• 【Health Environmental Protection】 sound insulation board is made of environmentally friendly polyurethane foam material, effective in sound insulation, and made of fireproof and sound insulation effects, ensuring practical safety.
• 【FASHIONABLE APPEARANCE】: This Acoustic Foam Panels is designed as unique triangle, which can not only absorb unnecessary sound, but also play a role in decorating the wall surface.
• 【Widely Usage】This sound dampening foam panels can be Use to spot treat a professional or home recording studio, commercial or home office, rehearsal space, or home theatre, and which are great for recording studios, vocal booths, control rooms, also ideal for home theaters, professional movie theaters, concert halls and more.
• 【Coverage Area】12 Pack Covers 12 Square Feet - Each tile is 1 square foot of 1 inch thick acoustic wedge. COMES WITH COMPRESSED.

User questions & answers

Question:	Does it easy to burn
Answer:	It will not unravel. The cut lines stays clean
Question:	Does it can actually eliminate noise
Answer:	Foam is 3mm thick.
Question:	Could I place them on my walls
Answer:	Hmmm. It is rigid with a "foam-like" interior. Probably 1/4". It can be folded. I put it on the inside of a tall metal planter to insulate roots for bamboo. Hope this helps.