Product description

Professional audio equipment that is perfect for any event

Our compact and portable Bluetooth powered sound system comes with all of the equipment and accessories you need for your event. Great for professional musicians, DJ's, and wedding event or concert equipment rental companies, our deluxe speaker system can be used both indoors and outdoors with many fixed installations. Use our professional quality speaker for Sunday worship services, theater events, music hall venues, or for your next corporate meeting.



Loaded with extra features:

- Built In FM tuner

- 2 inch tweeter

- 15 inch woofer 20Hz-20kHz, 102dB

- USB or SD player

- Wireless MP3 remote control

- Multi-colored LED flashing light display

- ON/OFF switch

- Two 1/4 inch microphone and 3.5mm AUX input, mics, echo, line and master volume controls

- 5 band slide graphic equalizer

- RCA line level outputs to link to another powered speaker

- 110V grounded wall plug for playing

- Speaker stand with adjustable pole mount

- Easy to grip handles

- Rolling rear wheels

- Instruction manual

• POWERED BLUETOOTH SPEAKER - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 1000 watts system power, multi-colored LED woofer flashing light display with ON/OFF switch
• EXTRA FEATURES - Built In FM tuner, USB or SD player with controls and remote, RCA, two 1/4 inch mic and 3. 5mm AUX input, mics, echo, line and master volume control, 5 band slide graphic equalizer, RCA line level outputs to link to another powered speaker
• HIGHEST QUALITY - Deluxe 15" woofer and 2" tweeter, 20Hz-20kHz, 102dB, rugged cabinet with rear wheels, handles, adjustable stand pole mount and is (H x L x W) 27" x 16" x 14"
• SYSTEM REQUIREMENTS - Any Bluetooth audio streaming device, standard US 110V grounded wall plug, any audio device with a standard RCA, 3. 5mm or 1/4 inch mic output. Use for DJ, PA, karaoke, live stage, party, beach or tailgating
• WHAT'S IN THE BOX - Acoustic Audio by Goldwood AA15LBS powered Bluetooth speaker with power cable, MP3 remote, wired mic with cable, speaker stand, instruction manual

User questions & answers

Question:	How do i connect the bluetooth? - jbd online
Answer:	No this product comes as individual units. You would need to buy 2 if you wanted a pair.
Question:	Does this have a battery or does it need to be plugged in to work
Answer:	It's not uncommon. Any ambient RF can substantially raise the noise floor for these kinds of speakers. Isolating the power supply from other devices might help, but short of placing the speaker in a faraday cage, you are unlikly to get rid of that hiss.
Question:	Can this device be hooked up to Wi-Fi
Answer:	Hi, Alto Pro support here! The internal driver featured in the TS315s is 4ohm. Please note, this Sub is an active speaker and is not suitable for receiving an amplified signal.
Question:	Could I use this for a wedding reception? 150-200 people
Answer:	Hi, Alto Pro support here! Thanks for your question. Whilst our TS308 supports XLR/1/4" Jack connections, you can connect an RCA cable using an RCA > 1/4" Jack adapter. I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan

Product features

About us

We manufacture the highest quality audio products in the industry. We are a direct to consumer company cutting out the middle man ensuring you receive the quality product.

Product description

These are the perfect speakers for any occasion or application. They were designed with durability in mind, so there's no need to worry about rust or wear-and-tear. They make great additions to any surround sound home theater, will fit onto any bookshelf, can be used with any stereo system and are great to use In bathrooms and kitchens. Each speaker can handle 200 watts of power (100W RMS), and has a full range sound and functionality. Included mounting brackets allows hassle-free installation in any location.

• MOUNTABLE INDOOR WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver
• HIGH QUALITY - Full Range sound coverage with 2.5" Polypropylene woofers, frequency response is 150Hz-20 kHz with 88dB at 8ohm
• DURABLE AND MOUNTABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets. Big sound from a compact speaker size of (H x W X D) 3.5" x 3.5" x 4.5" each
• SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 200 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
• WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood AA321B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings

User questions & answers

Question:	Can i use 4 of these and the matching center with 2 psw505 for a decent HT? 14x14 room
Answer:	Definitely yes, I have a Polk RM6750 subwoofer and 2 of this speakers with the matching center and they sound clear as water. Besides you can always lower your subs volume if its too much. Also remember the power your amp have is important, I'm using a Sony STR-DE335 amplifier which sends 100 watts per channel at 6 ohms and nothing has gone wrong yet. So far I have played music, movies and the morning news and I'm always happy about the clarity and loudness on only a 3.1 system. My guess is yours is going to sound much better with the 5.2 you are building. Nice pick and good luck with your shopping.
Question:	Do these have a screw hole in the back for mounting on a speaker stand
Answer:	No. They come with a mount that slides into a dove tail slot on the back of the speaker. The mount has limited movement. No 90 degree angles.
Question:	can these speakers work with the audio-techica at-lp60 usb turntable
Answer:	Answering late...for others needing help - you need active speakers to connect directly to the turntable otherwise you will need to connect the turntable & these speakers to an amplifier.
Question:	can you use a split copper speaker wire to connect from an old school amplifier to the speakers
Answer:	That's the way they were designed to be hooked up, so yes. Heck, I use old lamp cord and they work as well as they can for their size.

Product features

Polypropylene Full Range Woofer

AA321 bookshelf speakers have a booming yet compact 2.5" Polypropylene full range woofer with Butyl rubber surrounds for protection. The heavy duty ABS construction of their sealed cabinets make these speakers not only durable, but a sleek and stylish addition any indoor system.

Fully Directional Swivel Wall Attachment

Each speaker includes a durable, fully directional swivel wall mount attachment and 4 wall screws. Add precise sound to your home surround sound system by mounting these discrete speakers around the listening area. Turn or tilt the speaker to direct the sound exactly where you want it.

Spring Loaded Wire Terminals

These small, yet sophisticated speakers provide quick release spring loaded wire terminals providing a hassle-free connection to an already established surround sound system. Tuck them into tight corners and high up places without sacrificing accurate and clean sound.

Acoustic Audio by Goldwood AA321 Indoor Mountable Bookshelf Speakers

At 200 Watts Peak Power per speaker, these multi-purpose indoor speakers pack a punch. They were designed to be durable with heavy duty ABS construction sealed cabinets so there is no need to worry about wear-and-tear. At 3.5" high, they make great additions to any surround sound home theater, will fit onto any bookshelf and can be used with any stereo system. With full range sound, 2-way functionality and an unbeatable price adding these speakers to your system is a no brainer.

Simple Design and Easy Installation

Our simple, smooth design, with a choice between black or white finish, allows you to incorporate these speakers into any location. With quick release spring loaded wire terminals, connecting your new speakers to an existing system is a breeze. Seamlessly tuck them into the smallest spaces of your listening area without ever having to forfeit sound quality.

Swivel Wall Attachment

We made sure you are able to place your indoor speakers in your ideal location by adding a swivel attachment and 4 wall screws to mount to any wall. Simply screw the attachment into your desired place and slide the attachment into the custom insert on the back of the speaker. From here you can swivel left, right up or down to whatever degree you choose, guaranteeing focused sound quality exactly where you want it.

Product description

Acoustic Audio by Goldwood PRTY152 Battery Powered Bluetooth Speaker

Stream music from your phone to the built in Bluetooth receiver

Integrated battery powered amplifier with 600 Watts system power

Multi-Colored LED woofer flashing light display with ON/OFF switch

Built In FM tuner, USB drive or TF card player with controls and remote

1/4 inch mic input and 3.5mm AUX input

Mic volume, echo control, bass, treble and master volume control knobs

RCA line level outputs to link to another powered speaker

2-Way design and functionality with deluxe accordion edge 15" woofer and 2" tweeter

Frequency response is 20Hz-20kHz with 98dB sensitivity at 8ohm

Built In rechargeable battery plays for 6 hours and charges in 4 hours

Rugged cabinet has rear wheels, handles, adjustable stand pole mount and is (H x L x W) 24" x 16" x 13.75"



Acoustic Audio by Goldwood AS1 Heavy Duty Adjustable Speaker Stand

Black powder coated steel with 4mm thick support bars

Center pole safety lock pin and rubber feet for added security

Sturdy 32" to 44" footprint and conveniently folds down to 41" x 5.25" x 6.5" for easy travel



System Requirements

Any Bluetooth audio streaming device

Standard US 110V grounded wall plug for charging and playing

Any audio device with a standard 3.5mm or 1/4 inch mic output



Applications

DJ, PA, Karaoke or Live Sound

Party, Beach, Camping or Tailgating

Studio Monitor or Fixed Installation



What's in the boxes

1 Powered Bluetooth Speaker with power cable

1 Wireless Microphone

1 MP3 Remote

1 RCA to 3.5mm 25 foot Linking Cable

Instruction Manual

1 Speaker Stand

• BATTERY POWERED BLUETOOTH SPEAKER - Stream music from your phone to the built in Bluetooth receiver, integrated battery powered amp with 600 watts system power, multi-colored LED woofer flashing light display with ON/OFF switch
• EXTRA FEATURES - Built In FM tuner, USB or TF player with controls and remote, 1/4 inch mic input and 3.5mm AUX input, mic volume, echo control, bass, treble and master volume control knobs, RCA line level outputs to link to another powered speaker, wireless mic
• HIGHEST QUALITY - Deluxe accordion edge 15" woofer and 2" tweeter, 20Hz-20kHz, 98dB, built In rechargeable battery, rugged cabinet with rear wheels, handles, adjustable stand pole mount and is (H x L x W) 24" x 16" x 13.75", adjustable steel speaker stand
• SYSTEM REQUIREMENTS - Any Bluetooth audio streaming device, standard US 110V grounded wall plug, any audio device with a standard 3.5mm or 1/4 inch mic output. Use for DJ, PA, Karaoke, Party, Beach, Camping or Tailgating
• WHAT'S IN THE BOXES - Acoustic Audio by Goldwood PRTY152 battery powered Bluetooth speaker with power cable, wireless microphone, MP3 remote, RCA to 3.5mm 25 foot linking cable, instruction manual, 1 speaker stand

User questions & answers

Question:	Does it have a rechargeable battery
Answer:	Yes it does have a rechargeable battery, Just plug it in a outlet and it charges up and lasts for hours.

Product description

PylePro Model : PSI03Pro Audio Studio Speaker RisersMonitor Speaker Risers - Pro Audio Studio Speaker Riser Acoustic Sound Isolation Platforms, 9. 0’’ x 12. 0’’ -inches Features: Studio Monitor Speaker Riser PlatformsPro Audio Recording Acoustic IsolationLab-Tested Sound Dampening PerformancePerfect for On-Stage or In-Studio UseMade of Thick, High-Density Engineered FoamReduces Vibration & Unwanted Audio ResonanceEffectively Absorbs Bass RecoilMulti-Position Speaker Mount SupportAllows 'Upward' or 'Downward' Firing SoundDesigned for Studio Monitors, Subwoofers, PA Loudspeakers, Shelf SpeakersUsed by DJs, MCs, Sound Engineers, Instrument Players, PerformersWhat's in the Box: Monitor Speaker RisersTechnical Specs: Construction Material: High-Density Engineered FoamSpeaker Support Weight: Up to 33 lbs. Single Speaker Riser Size (L x W x H): 9. 0’’ x 12. 0’’ x 2. 0’’ -inches (Each)The Pyle Speaker Monitor Risers help to achieve optimal studio-quality audio clarity. The lab-tested sound isolation platforms help to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection. Allow your monitor speaker to give your audio frequencies clear, free-flow ability while providing speaker stabilization and sound dampening absorption - perfect for pro audio applications and studio recording sessions. High-density, engineered foam construction and universal speaker compatibility effectively stabilize and reduce recoil in any acoustic environment. Enjoy professional audio performance and natural bass clarity with the Pyle Pro Audio Speaker Monitor Riser Platforms.

• CREATES OPTIMAL SOUND: The Pyle Speaker Risers assist in achieving optimal audio performance. It reduces vibration and helps to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection
• UNIVERSAL COMPATIBILITY: Includes 2 sound dampening riser platform pads that are universally compatible and works with virtually all speaker types, brands and models. It works perfectly w/ studio monitor, subwoofer, loudspeakers and shelf speakers
• THICK DURABLE FOAM: Made of high density engineered foam that is lab-tested to promote efficient speaker stabilization, noise isolation and sound dampening absorption that gives your audio frequencies free-flow ability with more natural bass clarity
• ANTI-SLIP BASE PAD: Features anti-slip rubber base pad which helps keep your speakers secured and stable. Also has a reversible upward/downward firing sound speaker placement w/ ability to mount speakers in 3 angles. Perfect for stage or studio use
• 33 LB LOAD CAPACITY: Each riser measures 9” W x 12” D x 2” H w/ maximum speaker weight capacity of up to 33lbs. High-density foam construction and universal speaker compatibility effectively stabilizes and reduces recoil for any audio application

User questions & answers

Question:	Do speakers sit flat on the base without the insert or is the top wedge needed
Answer:	While the material keeps them pretty motionless the lip/wedge is support for the back of the speaker to hold securely.
Question:	how would these work for the 8 inch jbl lsr 308 studio monitors
Answer:	I would think the would work fine. Those JBLs seem to be around the same size as my Alesis monitors.
Question:	Would these be suitable for tower speakers listed at 34.4 lbs? I don’t want the front of the foam to compress too much and tilt the speaker forward
Answer:	Frankly, I don't think this foam can support that kind of weight. The speakers will tilt. The small studio monitors I use weigh about 10-12 pounds and that is all I feel comfortable with.
Question:	Neighbor complains about my subwoofer their ceiling light checks when Im watching tv.. is this platform will help me avoid troubles with the neighbor
Answer:	Most likely not. The problem with subwoofers is the way the low frequency waves are shaped and how they travel through walls. The pads will help a little with the direct vibration transmitted to the floor, but not with the rest...

Product features

Sound Dampening Speaker Riser

Speaker risers are placed to prevent vibrations from being transferred into other elements sharing the area like wooden floors, desktop computers, shelves and the like. It also holds the speaker as firmly as possible to reduce movement caused by the reaction effect. Vibrations leaking into any studio furniture or wooden floors results to blurring of bass and lower mid range. PYLE speaker risers helps in tightening the bass end to a noticeable degree, providing clearer sound quality.

Effectively Absorbs Bass Recoil

Stabilizes and Isolates the Speaker

Reduces Vibration & Unwanted Audio Resonance

Perfect for On-Stage or In-Studio Use

With a maximum speaker weight capacity of up to 110 lbs., this speaker riser is durable enough to carry heavy speakers to improve sound quality whether in a music studio or on the stage for musical concerts.

Universal Compatibility

Designed and built to support almost all types of speakers.

Assists in Achieving Optimal Audio Performance

Used by Musicians, Instrument Players, Performers, Sound Engineers, DJs, MCs, etc. Use of speaker risers help in optimizing audio performances.

• SMPad 4 is made out of the highest quality acoustical foam (50kg/m^3 density).
• 6.3'' x 8'' x 1.4'' inch (W x D x H). Designed to hold up to 16 lb without changing the shape.
• Sized to fit all popular 3’’, 3.5’’, 4’’ and 4.5’’ inch Speakers - PreSonus Eris E3.5 and E4.5, Edifier R980T - R1280DB - R1280T - R1010BT - R1700BT, Kanto YU2 YU4, Polk Audio T15, Mackie CR3 and CR4,Micca PB42X COVO-S, Alesis Elevate M1 and 3 MKII, MAudio AV32, AV40 and AV43, Micca Micca MB42, Micca MB42X and many more.
• Designed with multiple configurations allowing you to move the monitor isolation pads into a versatile array of angles for the best sound quality.
• Every pack comes complete with two short absorber pads, one for each of your left and right speakers (NO LOGO printed).

User questions & answers

Question:	There are a lot of powder coming off from the pads. Tried to pat them for 5 mins but still lots of powder. Seems disintegrating. Is this normal
Answer:	NO this is an manufacturing problem and it is NOT NORMAL, please check your amazon messages. Appreciated, Julian Sound Addicted
Question:	Will these fit nicely the Edifier s350db? the specs say the speakers are 5"w, this product is rated for up to 4.5", but width is actually
Answer:	Hello, the pads dimensions are 6.3 x 8 x 1.4 inch (W x D x H) and usually fit speakers from 3'' up to 4.5''. However, you can decouple your Edifier s350db left and right satellites but for the Subwoofer, you need a bigger pad.
Question:	I am a little confused. Is this a total of 4 pieces of foam? 2 pieces with a lip and 2 pieces with no lip
Answer:	Hello. Yes this product is composed of 4 pieces of foam made out to sustain/ reduce vibration for one pair of Studio Monitors (Left Speaker + Right Speaker) forming in total of 2 PADS.
Question:	Hi there, anyone using this on r1700bt? how it does fit on it? thanks
Answer:	Hello! Our Pads will definitely fit your edifier R1700BT speakers.

Product features

Excellent solution for better sound quality!

Sound Addicted makes speaker pads that will improve your playback by isolating your monitors from what they're sitting on. That way any vibrations the monitor cabinets makes, won't be transferred on to your desk, speaker stands or bookshelf.

Product description

The audiophiles at RightChoice headquarters designed the XL-Pro pads specifically for desktop audio setups!! Ever sat down at your desk and realized your speakers were facing your chest and not your ears as they were intended? These pads are the perfect solution to angle up your speakers to get a more immersive listening experience. The RightChoice XL-Pro Studio Monitor Acoustic Isolation Pads are a sleek, stylish way to present your Desktop Studio Monitors. It allows for multiple configurations, allowing flat, tilt up, and tilt down positions. These positions allow for the speakers to pointed directly at the listener, resulting in a better acoustic environment. The High Quality Premium acoustic foam reduces unwanted vibrations, resulting in a cleaner sound. Don't leave your speakers on your desk and facing your chest - the RightChoice XL-Pro Studio Monitor Acoustic Isolation Pads angle your speakers at your ears, the way it's supposed to be! We have designed these to be clean, modern, and sleek. There is no branding anywhere on the pads, so it blends in with your speakers. These are the best value Studio Monitor pads available on Amazon! Comes with TWO Isolation Pads for use with a pair of Studio Monitors. NO NEED TO PURCHASE TWICE - Your $11.95 purchase includes TWO pads, for use with two studio speakers. Universal dimensions fit most 3" and 4" Studio Monitors: 6" (width) x 9" (length) x 1" (height) per pad. Perfect for: M-Audio AV30, AV32, AV40, AV42 KRK Rokit 5 Mackie CR4, CR5, CR4BT, CR5BT And most other 3" and 4" Studio Monitors

• ⭐Top Seller! XL-Pro Pad is made of the highest quality acoustic foam (50 kg/m^3 density)
• 6 x 9 x 1.25 inch (W x D x H) Supports speakers up to 20 lb with no shape change
• Design allows 5 different angle configurations for ultimate directionality and sound quality
• Low Profile Design for a Sleek & Minimalistic look (NO LOGO printed). Every pack comes with TWO pads for left and right speakers
• Sized to fit all popular 3’’, 3.5’’, 4’’ and 4.5’’ inch Speakers - PreSonus Eris E3.5 and E4.5, Edifier R1280DB - R1280T - R1010BT - R1700BT, Polk Audio T15, Mackie CR3 and CR4,Micca PB42X COVO-S, Alesis Elevate M1 and 3 MKII, MAudio AV32, AV40 and AV43, Micca Micca MB42, Micca MB42X and many more.

User questions & answers

Question:	This is for one monitor or for both
Answer:	Hi Christian, This comes with two separate pads, so it is for both monitors. Thanks for asking!
Question:	would these be a good fit for Presonus E45s? My speakers are about 6.5 inches wide. Thanks
Answer:	These are jsut 6.5 inches wide and pretty thin so if you want to go for the cheaper end, i'd suggest these but they are good for the simple trick if you aren't wanting someone more heavy duty. Hope that helps!
Question:	How is the consistency of the cut from pad to pad? I'm looking to use both with one center channel. Bought another brand, but pads weren't cut even
Answer:	Thanks for your question! The XL-Pro Isolation Pads are precision cut to ensure that each pad is exactly the same. We've never run into one that was different than the other, so we're confident that it will work well for your center channel speaker. Have a great day!
Question:	does this work for desktop speakers
Answer:	Hi, The best thing to do is measure the size of the base of the speakers. If it is under 6.5x9 inches, then it will fit. You may also cut the pads yourself if you want them smaller. These pads were designed for speakers with a flat bottom, by the way. Thanks!

Product description

Acoustic Audio by Goldwood AA15LBS Powered Bluetooth 2 Speaker Set

Stream music from your phone to the built in Bluetooth receiver

Integrated power amplifier with 1000 Watts system power per speaker

Multi-Colored LED woofer flashing light display with ON/OFF switch

Crank the Music for a Bright Light Display, the volume of the music powers the LED light

Built In FM tuner, USB drive or SD card player with controls and remote

RCA line level, 1/4 inch mic, 1/4 inch instrument and 3.5mm AUX inputs

Mic 1, Mic 2, MP3/line, echo and master volume control knobs

Five band slide Graphic Equalizer

RCA line level outputs to link to another powered speaker

2-Way design and functionality with deluxe 15" woofer and 2" tweeter

Frequency response is 20Hz-20kHz with 102dB sensitivity at 4ohm

Rugged cabinet has rear wheels, handles, adjustable stand pole mount and is (H x L x W) 27" x 16" x 14"

Speaker Stand with black powder coated steel, safety lock pin and rubber feet

Wired Microphone with mic cable



System Requirements

Any Bluetooth audio streaming device

Standard US 110V grounded wall plug for playing

Any audio device with a standard RCA, 3.5mm or 1/4 inch mic outputs



Applications

DJ, PA or Karaoke

Party, Beach or Tailgating

Studio Monitor or Live Stage



What's in the boxes

2 Powered Bluetooth Speakers with power cables

2 MP3 Remotes

2 Speaker Stands

2 Wired Mics with Cables

Instruction Manual

• POWERED BLUETOOTH SPEAKER SET - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 1000 watts system power per speaker, multi-colored LED woofer flashing light display with ON/OFF switch
• EXTRA FEATURES - Built In FM tuner, USB or SD player with controls and remote, RCA, two 1/4 inch mic and 3.5mm AUX input, mics, echo, line and master volume control knobs, 5 band slide graphic equalizer, RCA line level outputs to link to another powered speaker
• HIGHEST QUALITY - Deluxe 15" woofer and 2" tweeter, 20Hz-20kHz, 102dB, rugged cabinet with rear wheels, handles, adjustable stand pole mount and is (H x L x W) 27" x 16" x 14"
• SYSTEM REQUIREMENTS - Any Bluetooth audio streaming device, standard US 110V grounded wall plug, any audio device with a standard RCA, 3.5mm or 1/4 inch mic output. Use for DJ, PA, karaoke, live stage, party, beach or tailgating
• WHAT'S IN THE BOXES - 2 Acoustic Audio by Goldwood AA15LBS powered Bluetooth speakers with power cables, 2 MP3 remotes, 2 wired mics with cables, 2 speaker stands, AARCA325 linking cable, instruction manual

User questions & answers

Question:	Are the speakers sterio
Answer:	Mono
Question:	How do you link the two speakers together so they play the same thing
Answer:	use a RCA to 3.5mm cable to link the speakers together
Question:	x active speaker or only one and pative speaker
Answer:	The speakers are 2 active speakers
Question:	What's the RMS for each speaker
Answer:	500W rms

• SMPad 5 is made out of the highest quality acoustical foam (50kg/m^3 density).
• 7.5'' x 11'' x 1.6'' inch (W x D x H). Designed to hold up to 24 lb without changing the shape.
• Every pack comes complete with two pads, one for each of your left and right speakers.
• Designed with multiple configurations allowing you to move the monitor isolation pads into a versatile array of angles for the best sound quality.
• Sized to fit all popular 5'' inches Studio Monitors - Yamaha HS5, JBL 305PMKII LSR305, KRK Rokit KRK RP4G3 RP5, Mackie MR5, M-Audio BX5, Adam F6, Tascam VL-S5, Alesis Elevate 5, Behringer MS16 JS-MS70, klipsch r-150m and many more.

User questions & answers

Question:	What is the best way to cut these down to size
Answer:	The material is very dense and easily cuts with a razor blade or Xacto knife type of device etc. leaving a nice smooth cut edge. .
Question:	What is the angle of the small piece
Answer:	Hello Chris and thank you for your question. The small piece angle is around 6 degrees .
Question:	Can i use this on my Presonus Eris
Answer:	Hello, Yes these pads will fit perfectly the Presonus Eris 5 monitors.
Question:	Can I use them on 24” speaker stands for Elac B
Answer:	Yes, unless you'd be "offended" by a slight overhang. These pads measure 7.5" wide and 11" deep. The Elacs measure 7.7" wide and 10.6" deep. So the speaker would overhang the pad by a negligible 0.10" on each side and, if using the flat settings on the pads, you'd have a half inch to spare in the front. However if you use the tilt feature on the pads (which you probably will given the height of the stands) you'll lose an inch of pad depth and the speaker will overhang the pad by 0.60" (a little over half an inch) in the front. Either of these overhangs will be barely noticeable and won't affect the stability of the speaker on the stand. However, if you would prefer no overhang, buy the larger pads for $4 more. They are 10" wide and 13" deep so you'll have room to spare side to side and front to back. If you want the speakers to fit exactly (why?) you can try cutting the larger pads but you'll probably end up with something inexact and crude-looking.

• 6.1” (155mm) Wide x 7.5” (190mm) Depth. 3” (76mm) Height in low setting. 8.25” (210mm) height in tall setting. 40lbs (18kg) weight capacity. Package includes 2 Stands.
• HEIGHT & TILT ADJUSTMENT: Offering 14 variations of height and tilt, the ISO-155 will help you optimize the placement of your monitors and focus your tweeters to ear level.
• PATENTED ISOACOUSTICS ISOLATION: Tested at the National Research Council of Canada (NRC). The IsoAcoustics award winning design provides superior isolation performance.
• EXCITING THE SUPPORTING SURFACE: The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area.
• REDUCES INTERNAL REFLECTIONS: IsoAcoustics isolator reduces internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.

User questions & answers

Question:	Can the 5.1" x 6" hold a subwoofer with footprint 16.1" x 15.4"? If not, what's my best option
Answer:	Yes most definitely it will work. And remember you may need another USB cable that about 6 inches because the printer is a female and the cable one end is a male and the other end of the cable is a female. So if you get this one you will need another cable
Question:	Return shipping costs
Answer:	Looks like this product is sold as a pair both right and left
Question:	Can someone with the current version of this stand check to see if the tubes are metal or plastic? I’ve gotten both answers
Answer:	yes it will. Will work for any usb device
Question:	What good does knowing the package dimensions do me? I need to know width and depth and range of height. How short, how tall? Bad description
Answer:	Yes. as long as the camera connects via usb

• Designed ONLY for iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11 Pro Max, iPhone 11, iPhone XS Max, iPhone XR, iPhone 8 Plus / 7 Plus / 6 6s Plus *CANNOT USE WITH PHONE CASE, PLEASE TOOK OFF THE CASE
• Amplifies the volume of speaker output up to 13dB or approximately twice as loud to the ears without using electricity
• Supports both portrait and landscape orientations; convenient for use with FaceTime, Podcast, conference call, music and video
• Made from soft-touch lightweight silicone material; compact, portable, and easy to carry on the go
• The Bone Horn Stand is the original acoustic sound amplifier and the award winner of Red Dot and iF Design Award 2011

User questions & answers

Question:	Do you have one for a Samsung ?or does this one fit the samsung
Answer:	I have i-phone. Tight fit with case on, but still works like a charm
Question:	Does this fit the iPhone X (5.65in
Answer:	I doubt it, unless there is one made specifically for the iPhone 10. I have an iPhone 7, and I ordered this item specifically to fit my phone.
Question:	How does this device charge
Answer:	I use this all the time. You don’t charge this. It’s an amplifier, not a speaker. Slide your phone in as described. You can plug your phone in from the bottom. It’s great if you’re listening to podcasts.
Question:	Does this fit samsung s20 fe
Answer:	I don’t know about Samsung. I have a iPhone 7 Plus that fits if I take the the protective wrap around rubber off.

Product features

Horn Stand : Best Partner for Outdoor Activities

Are you still using the Bluetooth wireless to amplify the sound?

Bone Horn Stand amplifier series was officially born in 2010, and the initial product received international awards from iF, Red Dot, and others, it works as a Phone Stand and Sound Amplifier at the same time. Horn Stand would be the best outdoor and indoor partner for you!

Multi Usage Design

Not just a sound amplifier, but also a portable stand for your phone. Accompany you to enjoy the music anytime anywhere.

Always Stay Charged

You can charge your phone and watch the video at the same time, provides the maximum convenience for you. Never worry about your phone died while using. (*Please take off the case when you use it.)

No Extra Batteries Required

Horn Stand can amplify the volume approximately twice as loud and make the sound more Treble and Clear without any electricity.

Portrait & Landscape Mode

The design combines the functions of a stand and a sound amplifier, allowing you to stand your phone vertically or horizontally.

Indoor & Outdoor Available

No matter where you are, what are you doing, Horn Stand accompany you to work from home (Conf calls, podcasts, facetime) and also go camping in a leisure day.

Life-Time Service

If you have any questions, welcome to contact Bone Collection Customer Support: amazon.support at bonecollection.com

• 12 Months After Sales Service
• Life-Time Technical Support

Product description

Acoustic Audio by Goldwood PA-500X passive 3-way 2 speaker set

passive old school speaker design, Simply drive power from your amplifier or receiver

full range sound coverage with 3-way tweeter, midrange and woofer configuration

deluxe 5" Woofer with polypropylene coated laminate cone

1" High temperature woofer KAPTON voice coil

3.5" Midrange with polypropylene coated laminate cone

wide dispersion tweeter horn with optimized compression driver

internal crossover wiring system

banana plug binding post, positive and negative, raw speaker wire input connections/4" Jack input and output to daisy chain to another passive speaker

frequency response is 50hz-20 kHz with 96dB sensitivity at 8ohm

digitally tuned ports for added bass response

high quality CARB compliant MDF wedge shape cabinet with black Aviation Grade carpet

metal mesh grill, 1.375" Pole stand mount and handles

easy transportation size of (H x W x D) 16.875" X 10.25" X 9" Each and 24 pound Shipping weight



system requirements

any amplifier or home audio receiver with raw speaker wire or 1/4 inch jack

power from your amp should be no less than 20 and no more than 800 watts per channel

corresponding cables to connect your amp to the speakers



applications

mobile DJ or pa

live stage or karaoke

studio monitor or home stereo



what's in the box2 passive speakers

instruction manual.

• Traditional passive loudspeakers - Passive old school speaker design, Simply drive power from your amplifier or receiver. Full range sound coverage with 3-Way tweeter, midrange and woofer configuration and internal crossover wiring system
• High quality - deluxe 5" Woofer with polypropylene coated Laminate cone, 1" Kapton voice coil, 3.5" Midrange with polypropylene coated Laminate cone, wide dispersion tweeter horn with optimized compression driver, banana plug and raw speaker wire inputs
• Portable and durable - high quality CARB compliant MDF wedge shape wood cabinet with black aviation grade Carpet, metal mesh grill, 1.375" Pole stand mount and handles. (H x W x D) 16.875" X 10.25" X 9", 50hz-20 kHz with 96dB at 8ohm
• System requirements - any amp or receiver with raw speaker wire or 1/4 inch jack outputs, power from your amp should be no less than 20 and no more than 800 watts per channel, cables to connect your amp to the speakers. Use for DJ, PA, karaoke and live stage
• What's in the box - 2 Acoustic Audio by Goldwood PA-500X passive speakers, instruction manual

User questions & answers

Question:	Do these have a nice bass
Answer:	For about an hour that is all the time they last
Question:	I have the beheringer 1202fx sound board do i need anything else to make these speakers work
Answer:	these passive speakers require an amp to power them
Question:	I purchased these on October 12, 2018. They have now quit working. How do I utilize the warranty. I can’t find any info to call or email
Answer:	These speakers are garbage, we received them and the never worked so we returned for a refund and the company didn’t even want them back.
Question:	Does it require an amplifier or it has inbuilt amp
Answer:	Yes,it requires an amplifier. You can try this. https://www.amazon.com/Bluetooth-Audio-Amplifier-Integrated-Subwoofer/dp/B07JVFY27T

• 12 x 8 x 1.8 Inches. Designed to fit with most popular 5" monitors.
• UNIVERSAL: Works with JBL LSR305, KRK Rokit 5, Yamaha HS5, M-Audio BX5 and More.
• FLEXIBLE: Designed with multiple configurations allowing you to move the monitor isolation pads into a versatile array of angles for the best sound quality.
• PRE-CUT: Foam wedge cut out for 5 different angle configurations.
• Package includes: 2 pack Acoustic Isolation Pads in a bag

User questions & answers

Question:	How many pounds will these hold
Answer:	They can hold 6-8 lbs normally.
Question:	Is this product made of polyurethane foam (pu foam) or polyurethane sponge (pu sponge
Answer:	Hello, they are made of polyurethane foam (pu foam) , thank you.
Question:	Are these pads angled? Can they be configured so they are flat? My speakers are already angled
Answer:	They are angled, but can also be configured flat.
Question:	Is this a set for 2 speakers
Answer:	Yes, 2 speakers

Product features

PREMIUM MATERIEL

• Made of high density(50kg/m^3) acoustic foams, thick enough to support your speaker box and eliminate the noise from removing your speaker
• Every pack comes complete with two pads, one for each of your left and right speakers.

REVERSIBLE WEDGE FOAMS

Designed with multiple configurations allowing you to move the monitor isolation pads into a versatile array of angles for the best sound quality.

Widely Application

Sized to fit all popular 5'' inches Studio Monitors - Yamaha HS5, JBL 305PMKII LSR305, KRK Rokit KRK RP4G3 RP5, Mackie MR5, M-Audio BX5, Adam F6, Tascam VL-S5, Alesis Elevate 5, Behringer MS16 JS-MS70, klipsch r-150m and many more.

• Compatibility - Universal surround sound speaker stand system for satellite speakers, bookshelf speakers, and more
• Dimensions - Floor to top shelf measures 23”. Top shelf measures 8” x 8”, and the base measures 10” x 10”
• Appearance - Premium aluminum and glass speaker stands (2 stands included) in sleek glossy black appearance
• 2 Foundation Options - Carpet spikes and rubber feet are provided to accommodate different floor types. Both options give a sturdy, reliable foundation that increases stability and protects your floor from scratches
• Cable Management - Integrated internally for keeping potentially messy cords clean and organized

User questions & answers

Question:	Will these be suitable for the kef ls50w speakers
Answer:	HI VIVO, why is it that these would not work? The top plate is larger than the stands specifically designed for the KEF LS50W, which are 6.56in.W x 7.125in.D, thanks!
Question:	If I buy these stands, can I get 'Rubber feet' together? Or shouid I buy another rubber feet personally
Answer:	Hello, thank you for your question! These stands come with carpet spikes and rubber feet!
Question:	What is the diameter of the center pole
Answer:	Thanks for checking! The diameter of the center post is 2-3/8".
Question:	how much weight will these carry
Answer:	I have got 9 lbs on mine (weight of speaker), but I,m sure it would support 20 lbs easily.

Product features

SLEEK APPEARANCE

Premium aluminum and glass speaker stands (2 stands included) with a sleek glossy black appearance complements nearly any home or office environment.

FOUNDATION OPTIONS

Insert carpet spikes or rubber feet to accommodate your specific floor type, keeping your stand secure and protecting your floor from scuffs and scratches.

CABLE MANAGEMENT

Cables are integrated internally to keep potentially messy cords clean and organized.

SPECS

• Number of Items: 2
• Top Dimensions: 8" x 8"
• Base Dimensions: 10" x 10"
• Stand Height: 23"
• Weight Capacity: 22 lbs

VIVO Speaker Stands

We use thoughtfulness and creativity in each ergonomic design, and ultimately it’s how that design enhances your audio display that matters.

Product description

PylePro Model : PSI01

Pro Audio Studio Speaker Risers

Monitor Speaker Risers - Pro Audio Studio Speaker Riser Acoustic Sound Isolation Platforms, 12.0'' x 4.0’’ -inches

Features:

Studio Monitor Speaker Riser Platforms

Pro Audio Recording Acoustic Isolation

Lab-Tested Sound Dampening Performance

Perfect for On-Stage or In-Studio Use

Made of Thick, High-Density Engineered Foam

Reduces Vibration & Unwanted Audio Resonance

Effectively Absorbs Bass Recoil

Multi-Position Speaker Mount Support

Allows 'Upward' or 'Downward' Firing Sound

Designed for Studio Monitors, Subwoofers, PA Loudspeakers, Shelf Speakers

Used by DJs, MCs, Sound Engineers, Instrument Players, Performers

What's in the Box:

Monitor Speaker Risers

Technical Specs:

Construction Material: High-Density Engineered Foam

Speaker Support Weight: Up to 22 lbs.

Single Speaker Riser Size (L x W x H): 12.0’’ x 4.0’’ x 2.0’’ -inches (Each)

The Pyle Speaker Monitor Risers help to achieve optimal studio-quality audio clarity. The lab-tested sound isolation platforms help to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection. Allow your monitor speaker to give your audio frequencies clear, free-flow ability while providing speaker stabilization and sound dampening absorption -- perfect for pro audio applications and studio recording sessions. High-density, engineered foam construction and universal speaker compatibility effectively stabilize and reduce recoil in any acoustic environment. Enjoy professional audio performance and natural bass clarity with the Pyle Pro Audio Speaker Monitor Riser Platforms.

• CREATES OPTIMAL SOUND: The Pyle Speaker Risers assist in achieving optimal audio performance. It reduces vibration and helps to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection
• UNIVERSAL COMPATIBILITY: Includes 2 sound dampening riser platform pads that are universally compatible and works with virtually all speaker types, brands and models. It works perfectly w/ studio monitor, subwoofer, loudspeakers and shelf speakers
• THICK DURABLE FOAM: Made of high density engineered foam that is lab-tested to promote efficient speaker stabilization, noise isolation and sound dampening absorption that gives your audio frequencies free-flow ability with more natural bass clarity
• ANTI-SLIP BASE PAD: Features anti-slip rubber base pad which helps keep your speakers secured and stable. Also has a reversible upward/downward firing sound speaker placement w/ ability to mount speakers in 3 angles. Perfect for stage or studio use
• 22 LB LOAD CAPACITY: Each riser measures 4” W x 12” D x 2” H w/ maximum speaker weight capacity of up to 22lbs. High-density foam construction and universal speaker compatibility effectively stabilizes and reduces recoil for any audio application

User questions & answers

Question:	Can i use on b&w cm9 tall speakers
Answer:	no idear ..not spoil or dent use it la.
Question:	What material is the foam? I would like to use them in an aquarium and not poison the fish
Answer:	I got mine less than a year ago and the posts/tubes are metal/aluminum. The “square” platform sections are high quality plastic.
Question:	Will these work for martin logan’s motion 60xt? if so which should i get
Answer:	Short Setting: 6.1"x7.5"x3" Tall Setting: 6.1" x 7.5" x 8.25" Tilt: Up to 6.5 degrees Short Weight Limit: 40lbs Tall Weight Limit: 35lbs I hope this info helps you.
Question:	Will this fit the Yamaha HS
Answer:	Try your local Walmart or Best Buy or even try Target ok

Product features

Sound Dampening Speaker Riser

Speaker risers are placed to prevent vibrations from being transferred into other elements sharing the area like wooden floors, desktop computers, shelves and the like. It also holds the speaker as firmly as possible to reduce movement caused by the reaction effect. Vibrations leaking into any studio furniture or wooden floors results to blurring of bass and lower mid range. PYLE speaker risers helps in tightening the bass end to a noticeable degree, providing clearer sound quality.

Effectively Absorbs Bass Recoil

Stabilizes and Isolates the Speaker

Reduces Vibration & Unwanted Audio Resonance

Perfect for On-Stage or In-Studio Use

With a maximum speaker weight capacity of up to 110 lbs., this speaker riser is durable enough to carry heavy speakers to improve sound quality whether in a music studio or on the stage for musical concerts.

Universal Compatibility

Designed and built to support almost all types of speakers.

Assists in Achieving Optimal Audio Performance

Used by Musicians, Instrument Players, Performers, Sound Engineers, DJs, MCs, etc. Use of speaker risers help in optimizing audio performances.