14 best behringer car speakers

Product description

• High-power 550-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
• Integrated sound processor for ultimate system control and speaker protection.Crossover Frequency: 2.4kHz

User questions & answers

Question:	Can you get a wireless mic to work with this speaker
Answer:	Make sure all of your equipment is properly connected. Do not use a device that removes the ground on power cords. I had a computer power supply plugged in with a ground eliminating adapter and it created a lot of buzz. I set the volume, treble, and bass all to 12:00 on the speakers.
Question:	too much hiss,how can i eliminate the hiss
Answer:	Depends on the job. Technically speaking one of these speakers has enough punch to be way more than audible in a medium theater (50'x40' stage, 300 seat house) at about 1/3 volume. I own three of these speakers that I use for my full DJ rig, but if there's some retreat, a beach party, a workshop day, or something that just needs a bit of ambiance music (requires only an iPod and some way to project the track) I'll bring one of these in and adapt 1/8 stereo to 1/4 mono through a DI box and the end result is fantastic. If you're DJ-ing indoor dance floors or something where coverage, volume, and quality are all concerns and your paycheck is one the line, then you'll probably want to go for two speakers to reduce dead-space on the floor.
Question:	is it a necessity to purchase a pair or does one get the job done
Answer:	I run my Android phone to it from the phone's headphone jack. However, as I learned after purchasing the speaker, you cannot run the full (stereo) signal back to the Behringer. This PA is strictly mono, so the cable I use is like this: http://www.amazon.com/Cable-feet-3-5mm-Stereo-Splitter/dp/B0016LFN2C/ref=sr_1_3?ie=UTF8&qid=1384901986&sr=8-3&keywords=stereo+cable+to+rca You will have to also purchase an adapter like this: http://www.amazon.com/Hosa-Cable-GPR101-Inch-Adaptor/dp/B000068O3S/ref=sr_1_1?ie=UTF8&qid=1384902095&sr=8-1&keywords=adapter+rca+to+1+4+inch. There are two there, but since your Behringer only has one input, you'll plug one of the two RCA ends of your cord into the 1/4" adapter, and the adapter into the Behringer. You won't be getting a stereo signal, but with most music, you won't notice it unless you're an audiophile.
Question:	can you directly plug in an ipod to it with the right aux cord
Answer:	"Self-amplified" speakers are known in the business as "ACTIVE" speakers. Even if you don't read the product descriptions carefully, you can tell the difference from the pictures: active speakers need their own power, so in addition to the usual audio jacks, you'll see a power input, a power switch/button and a volume knob. Passive speakers (like this one) will only have audio jacks -- the power and volume are provided by an external amplifier.

Product description

High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

• High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
• "Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs

User questions & answers

Question:	Can i plug a keyboard into this speaker
Answer:	I dont see the use of it!..Why a keyboard????
Question:	Hum from speaker after pairing. Has anyone else had this problem
Answer:	No I have not . Best speaker I have owned.
Question:	Can i plug it in to 240 voltage
Answer:	I only used 120 V, three phrase .Haven't tried 240 V as yet, so I can't make any recommendations. Thank you.
Question:	if i get 2 of them ,will they play in stereo
Answer:	When I first hooked them up I said to myself that it sounds like they are playing in stereo...and yes they sure will...suprised me but the do play in stereo...checked it out with a stereo left right song and confirmed it...hope that helps...very nice speakers when you get them set right...TC

Product description

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection

User questions & answers

Question:	Would this speaker be ideal for home karaokee for a room size 15'x
Answer:	It has combo inputs, so you shouldn't need an adapter at all to use a 1/4" mono cable as your input.
Question:	What kind of a adapter would I need to quarter inch mono cable
Answer:	Because it is a stereo signal and a mono jack the signal gets messed up. You need a 1/8th inch (headphone jack) to DUAL mono 1/4 inch. Plug those into inputs 1 and 2 and turn the channels up equally. Then it will sound fine.
Question:	I tried plugging in my phone with a 1/4inch trs to 1/8 inch aux cord and it sounded awful as if the music i was playing was mono..how can i fix this
Answer:	No, it is not battery-powered.
Question:	Is it battery powered
Answer:	You can plug anything you'd like into re 205, but I wouldn't recommend using it for a bass amp. Could be used as a low power practice amp.

Product features

Behringer Eurolive B112D Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power

Product description

The ULTRATONE K900FX specializes in clean, powerful sound. With this 90-Watt workhorse in your rig, your keyboards will sound their best gig after gig.

Your keyboards will sound their best, gig after gig. Click to enlarge.

Full 3-channel operation with separate Volume and FX Send per channel.

Plenty of connectivity, including a subwoofer out and RCA input.

Channel Your Sound

The K900FX gives you three channels, each with separate volume and FX SEND controls, plus Channel 1 has an additional XLR mic input for direct connection of a dynamic microphone. So, if you're the kind of keyboardist with multiple instruments at your disposal, the K900FX is ready to handle up to three independent signals. It is also ideal for use as an all-in-one solution for keys and vocal applications.

The MAIN Section gives you separate controls for FX RETURN, MASTER VOLUME, PHONES and SHAPE.

Built-In Effects

The onboard 24-bit digital FX processor, with 100 amazing presets, adds a high-tech dash of reverb, chorus, flange, delay, pitch shift and other effects to your sound.

CD Input/Headphone Out

A CD input allows you to play recorded music through the K900FX during performance breaks (or just for playing along), great for CD players, MP3 players, or anything else you want to hook up. A separate headphone output is perfect for quiet practicing.

Stand Mountable

The K900FX also features an integrated 35-mm pole socket for stand mounting and use as a PA system.

Big, Beautiful BUGERA

A 12" BUGERA woofer, made completely in-house by our own skilled artisans, works in connection with a custom-made 1.0" driver for awesome, full-range sound. The K900FX also features a subwoofer output, as well as a line output for direct connection to your mixing console.

Be EQ'd and Feedback-Free

Use the K900FX to bring out the best in your sound via its 5-band graphic EQ with our proprietary FBQ Feedback Protection System. This incredible audio solution immediately pinpoints frequencies that cause feedback, so you get perfect sound every time.

What's in the Box

Behringer K900FX, Power Cable, User's Manual

• Ultra-flexible 90-Watt 3-channel PA System / Keyboard Amplifier
• Powerful 12'' BUGERA woofer and custom-made 1'' driver for ultimate sound reproduction
• Integrated digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
• Full 3-channel operation with separate Volume and FX Send per channel

User questions & answers

Question:	can you use sep. effects petals, i have a volcal harminizer effects petal,can that be hooked up to my mic
Answer:	Yes! It gives a clean sound, easy to carry, and loud enough for medium size places. I used these for church and they were perfect.
Question:	Can I use it on 220V
Answer:	600 watts !!! No way, try to compare this with another amp such as Roland keyboard amp.I own a Behringer K1800FX, rated at 180 watts, same look and physical size as this one and I would say it delivers about 80 watts at most. This kind of output rating gives me lot of doubts about the manufaturers of lower quality brands (such as Behringer, Pyle, etc...). ROLAND, FENDER don't do that.
Question:	Can I use this as a vocal amplifier/PA
Answer:	I know this is an old question but my answer will apply to just about any amp with a stereo link. A stereo link allows you to connect another amp. The output sends the signal to another amp and the input receives the signal from another amp. Adding another KXD12 using the stereo link would give you a total of 8 channels to work with. I can also say that this will also function as a built in effects loop because I have used it that way.
Question:	Is this amp mainly used for keyboards or acoustic guitars? What is it best suited for
Answer:	Yes, this amp sounds nice for that. However, if you are looking for a LOUD amp this one might not be enough. I recommend you use a preamp or boost your output signal to the KXD12 for best results. It also works good when connected to a PA system. On a side note, I have had intermittent issues with the built in effects unit and the eq sliders are a bit delicate. Overall, for the money I paid, I’ve been happy with the KXD12.

Product description

Looking for a simple, affordable way to get your music into the digital realm? Or maybe you'd like to connect your computer to an external effects unit or recorder? Want to transfer your old cassette tapes to CD before the oxide falls off the tape? The fastest, easiest way to get analog audio into your computer is with the U-CONTROL UCA222 Audio Interface.

The fastest, easiest way to get analog audio into your computer. Click to enlarge.

S/PDIF optical output and headphone out with volume control.

Includes software such as XT Software's energyXT for recording right out of the box.

PC and Mac Ready

This ultra-compact, USB-powered device lets you connect your PC or Mac computer to virtually any piece of audio gear. It gets its power from your computer's USB bus, so no external power supply or batteries are required. And the UCA222 requires no special setup or drivers--just plug it in to a free USB port and start recording.

Versatility

The UCA222 features two analog mono inputs for connecting any line-level device, such as a mixer or tape deck, and two analog mono outputs for connecting active speakers or studio monitors. On the digital side, the UCA222 provides USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output has a dedicated level control and allows you listen to either the input source or the computer output.

Plenty of Options

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222's RCA outputs to the TAPE INPUT jacks of your mixer or active monitors, or directly into the input channels of the mixer. Connecting to mixer input channels gives you access to equalization and allows you to use the AUX Send features of your mixer to build extremely versatile monitor mixes for your recording sessions.

Tons of Free Software

Because you'll want to take full advantage of the UCA222's podcasting and recording potential we've included a massive software package including Audacity, Podifier, Juice, Podnova and Golden Ear. You're ready to go live on your Mac or PC computer right out of the box! You also get more than 100 virtual instruments and over 50 effects plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output.

When you're ready to take your recording projects to the next level, XT Software's energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode.

Great Value

For a fraction of the cost of other USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio gear.

What's in the Box

U-CONTROL UCA222 Audio Interface,  User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
• Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
• Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
• Works with your PC or Mac computer - no setup or drivers required
• Stereo Headphone output with dedicated Level control lets you monitor both input and output
• Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer
• Bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins

User questions & answers

Question:	Will this device be able to take a stereo signal, have it processed by a linux machine and then output the modified stereo signal to it's RCA outputs
Answer:	If the device is plugged into the linux machine via the USB cable, it will do this for you. With this hookup, it will produce a 2 way signal, even simultaneously, 1 going into the computer, 1 coming out from the computer. If need be, it’s even capable of looping an output signal back in, say to a recording app on your computer. Just make sure you flip the little black monitor switch to the off position to eliminate distortion, and the signal looping back in will be crystal clear and strong.
Question:	Do I need to buy a separate cable to use this product? I'm not really sure how the I/O system works. Can someone explain? Thanks
Answer:	Not sure of your intended use for this product.I bought the UCA222 because the earphone jack on my Dell laptop went bad. It worked really well for my needs, it has a USB plug that connects to the standard USB port on my laptop. Then I connect my earphones to a standard plug on the device. No other cable required for me.
Question:	Can you connect to a USB power supply and use the analog to S/PDIF output
Answer:	I don't know about the S/PDIF but I suspect it won't work very well. I tried using the analog in to headphone jack using a USB power supply and it sounded terrible. I thought it would be a way around having to use a computer and it didn't work. Once I plugged the UCA222 into a laptop instead of a power supply it sounded way better.
Question:	Can I connect 5 of these to get 10 independent audio output channels generated by the computer via usb
Answer:	There's nothing technically preventing you from connecting 5 of these to get 10 independent audio outputs. If your software supports it, your computer will just see them as 5 individual audio cards. The problem your likely to run into is your computer does have a limit on how many USB devices can function simultaneously (USB Bandwidth). One way around this problem is to use a Quad USB PCI Card, that has 4 USB port and each one in it's own controller. The next thing you will need to consider is how many PCI lanes you have (will determine how many USB controllers your PCI bus can support) Hope this helps.

Product features

U-CONTROL UCA222

The U-CONTROL UCA222 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds.

It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. We even give you all the software you’ll need to get started!

Tons of Free Software

To truly get the most out of your UCA222, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: - Record live audio -Convert tapes and records into digital recordings or CDs - Edit Ogg Vorbis, MP3, WAV or AIFF sound files - Cut, copy, splice or mix sounds together - Change the speed or pitch of a recording - And much more.

Imagine the Possibilities

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely-versatile monitor mix for recording sessions.

Compose. Record. Mix. Share

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an over-priced USB audio interface from those other guys, you can have state-of-the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Bridging the gap between your music and the rest of the world – the U-Control UCA222. Check one out at your local Behringer dealer, or place your order online today.

Product description

• Professional and multi-purpose direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to renowned BEHRINGER OT-2 transformer
• Allows direct connection to speaker outputs with up to 3,000 Watts
• Ground Lift switch eliminates typical ground loop problems

User questions & answers

Question:	can i use this to hook up my 6505+ to my m-box
Answer:	If you have the combo version, it has an XLR out already, so no DI required. The head version doesn't seem to have this option, so you could use the preamp out, but I'm not sure if you could hear a difference between using a DI or running the 1/4" into the line level input of the M-Box. You'll lose the tone you get from the power amp tubes either way. The main point of a DI is to convert a 1/4" instrument signal to a balanced XLR signal if you're going into a stage snake. Effectively running a 50' or 100' 1/4" cable will generally introduce noise and reduce signal quality, so the DI is a great option. I've used this passive DI box in live situations for the past year, and it's worked like a champ. I run my tracks (from an iPod) through it.
Question:	Can this reduce a speaker level signal to a line level signal? E.g. if I wanted to take a speaker level and connect it to a mixer
Answer:	YES. The other answers are not accurate. This device as well as many other DI Boxes can make a Line Level 'copy' of the high power signal going to a speaker. This is a common use however this yes comes with a major caveat. The source (1/4 " INPUT) can be a highly amplified signal, such as the speaker output of a 100W guitar amplifier. The output signal (XLR OUTPUT) will be what the mixer wants (Line Level). CAVEAT: There must be a load connected to the THRU (Parallel OUT on this device). This load can be a speaker or speaker load simulator, basically what you would normally connect to the amp. Without a load connected, no signal flows and nothing will be output. Worse yet, without a load connected, many amps will fry. Amp to DI box to Speaker(1/4" OUT) and Mixer (XLR OUTPUT) is commonly used by guitarists. This allows the PA Mixer or Recording Audio Interface to get all the good sound that the guitar signal chain has built, only missing coloring from the speaker cabinet. If needing your speakers to be silent while still getting a good output on the XLR, adding a decent amp Attenuator or Load Simulator after the DI Box can reduce the power reaching the speaker to or near zero. Note: Many higher end Attenuators and Load Simulators have a built in DI Box.
Question:	I want to record digital piano and play live at church. Should I get Pyle-Pro PDC21 for $8 or is this significantly better
Answer:	A normal DI box is $50 so I wouldn't go too much lower than this. These seem to work well. I've only had one go bad in the past year or so and I purchased like 8 for my church.
Question:	Does this work for connecting the sound output from a PC or MP3 player into a PA system using a Stereo 1/8" TRS to Mono 1/4" TS cable
Answer:	Yes that should be fine! :) You would also need an XLR to connect the DI Box to the PA.

Product features

ULTRA-DI DI400P

The ULTRA-DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI400P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

- Professional and multi-purpose direct injection box for stage and studio applications.

- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers.

- Ultra-flat frequency response due to renowned Behringer OT-2 transformer.

- Allows direct connection to speaker outputs with up to 3,000 Watts.

- Ground Lift switch eliminates typical ground loop problems.

- Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer.

- ¼“ TRS and gold-plated XLR connectors.

- Ultra-rugged, road-suitable metal case.

- Designed and engineered in Germany.

Directly to the Point

With its parallel ¼ " In and Out jacks, the DI400P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR Output sends a balanced signal to your mixer. You can even plug your guitar, bass or keyboard amp’s speaker output into the DI400P, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. The superior ground-lift switch eliminates hum associated with ground loops - and our high-performance OT-2 transformer provides the ultimate in signal integrity.

Truly Transformative

The secret to the DI400P’s ruler-flat frequency response is its Behringer OT-2 balanced-line transformer. Praised by audio engineers the world over, the OT-2 provides superior signal isolation from local AC and RF hum, and the ultimate in impedance matching. The resulting output signal is entirely true to the original source - in all its pristine glory.

Great Sound, Exceptional Value

The ULTRA-DI DI400P is ultra-compact and housed in a tough, road-ready metal case. This means the DI400P DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band. See for yourself what the incredible ULTRA-DI DI400P can do for your sound at your nearest Behringer dealer - or place your order online today!

Product description

Few things are more essential to recording or live performance than dynamic microphones. Ask any sound engineer and they will tell you to keep as many as possible on hand. BEHRINGER has bundled three great-sounding dynamic microphones into one impact-resistant case, with stand adapters and mic clips so you'll be ready to capture your sound in brilliant resolution.

Three great-sounding dynamic microphones in an impact-resistant case, with stand adapters and mic clips. Click to enlarge.

What is a Dynamic Microphone? Dynamic mics have several advantages that make them ideal for live applications or recording amplified instruments. They're robust, resistant to moisture and can achieve high gain before feeding back. These microphones' cardioid pickup pattern is designed to capture the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound. Why the XM1800S? If you take a look at the stage in any club, you'll probably see at least three dynamic mics for the vocalists, with even more for the drums and amplifiers. This convenient package puts three great-sounding mics at your immediate disposal. XM1800S mics provide super-clean sound with minimal distortion, a slight presence lift in the critical mid-range, and an on/off switch for breaks in the set. What's in the Box Three Behringer XM1800S Microphones, Three Mic Clips With Stand Adapters, Protective Case

• Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
• Ultra-wide frequency response for brilliant and transparent sound
• Extremely high signal output lets your voice cut through
• Cardioid characteristic minimizes background noise and feedback
• Convenient on/off switch to mute during breaks

User questions & answers

Question:	how long do they last before charging them
Answer:	When I purchased the Mics Bundle I also purchased the Yamaha MG102C 10-input Stereo Mixer Bundle W/(2) 20' XLR balanced Cables for mics & (2) 18.6' Instrument Cables The Yamaha stereo mixer is a very good pre-amp, mixer, with good tone controls. The out-put of this mixer-amp I then connect it even to a simple guitar amplifier of 20 watts, and I get a very good P.A. system going, and it serves so well for a gathering of 50 to 70 people in a hall, or a picnic spot, or family get-togethers. The point to always remember is to keep the mics/use the mics behind the speakers, or maximum just in line with the speakers facing the audience. If you step ahead of the speakers, then the volume should be reduced or you will get feed-back - the howling screeching sound over the speakers. The Power amplifier I would suggest to purchase is Behringer EUROPOWER EP4000 Professional 4,000-Watt Stereo Power Amplifier with Atr (Accelerated Transient Response) Technology by Behringer. You would have to purchase a pair of 2000-watts speaker boxes too.
Question:	What type of amplifier do I need to use with these mics? I just need a mic for lectures, not music
Answer:	You need a mixing board to connect to an amplifier. A very few amps have a mike connection where you can plug a mike directly into an amp and I have a DVD player that has 2 mike connections. Ordinarily you need a mixing board to plug one or more mikes into an amp. The mixing board I have is a Behringer 1202FX which is an excellent compact mixer and it connects to an amp with either a stereo RCA cable or stereo 1/4" plugs/cable using an auxillary or any analog line input.
Question:	how does it connect to an amp
Answer:	They are good, but very sensitive regarding angle and range, so you will have to prep your guests/co-hosts for distance and angle. The polar pattern is somewhat unforgiving to the person using the mic, but easy for the person mixing. These mics require a decent amount of gain. My Allen & Heath Zed10-FX can drive them with gain turned up to about 85%, which is nuts since this low-end board has mid-range quality preamps that are generally reviewed highly for their ability to drive even the SM7B without an external preamp. Be advised.
Question:	I want to do some recording for podcast. We will be sitting around a table. Using a mix board and headphones. Do you think these mics would be decent
Answer:	I never got to find out, they would not work for me.

Product features

XM1800S

• Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
• Ultra-wide frequency response for brilliant and transparent sound
• Extremely high signal output lets your voice cut through
• Cardioid characteristic minimizes background noise and feedback

ULTRAVOICE XM1800S

Few things are more essential to recording or live performance than dynamic microphones. Ask any sound engineer and they will tell you to keep as many as possible on hand. Behringer has bundled a set of 3 great-sounding XM1800S dynamic microphones into one impact-resistant case, with stand adapters and mic clips so you’ll be ready to capture your sound in brilliant resolution.

What is a Dynamic Microphone?

Dynamic mics have several advantages that make them ideal for live applications or recording amplified instruments. They’re robust, resistant to moisture and can achieve high gain before feedback. These microphones’ cardioid pickup pattern is designed to capture the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound.

Why the XM1800S?

If you take a look at the stage in any club, you’ll probably see at least three dynamic mics for the vocalists, with even more for the drums and amplifiers. This convenient package puts three great-sounding mics at your immediate disposal. XM1800S mics provide super-clean sound with minimal distortion, a slight presence lift in the critical mid-range – and an on/off switch for breaks in the set.

Value

Check out the XM1800S at your nearest Behringer dealer and find out why these mics are becoming so common in practice spaces, bedrooms, professional studios and stages all over the globe.

Product description

• 2 matched condenser microphones for stereo studio recording and live applications
• Ideal as main and support microphones for studio and live applications
• Cardioid pickup pattern for effective feedback elimination
• Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
• Switchable low-frequency roll-off and input attenuation

User questions & answers

Question:	Pro-grade TRS to XLR microphone cable - are these ok with the Behringer C
Answer:	These mics can work fairly well as overheads for drums, or on a hi hat. You might even get decent results on acoustic guitar, small percussion devices like wind chimes, etc. Since they are small diaphragm condensers they aren't meant to pick up an entire band with complete accuracy as a stereo pair. Of course they can record all the instruments, voices etc you described if the sources are set up properly and the sound is balanced in your recording space, but they won't provide a balanced frequency response, especially in the bass and low-mid regions. I have a pair and use them occasionally for non critical applications. For the money, they are ok at best, but they will not provide the quality sound that a well-made matched-pair of large diaphragm condensers would. Names like AKG, Sennheiser, Shure, Rode, Audio Technica and Neumann are just a few companies that make truly professional mics that would get the job done properly.
Question:	Has anyone use these on drums? live, recording or even a rehearsal that you mixed down with bass, guitar, horns, mutiple singers ect
Answer:	We have a small "underground" church and our choir sings in an isolated room due to limited space in the main hall. Using these mics, we are heard in the main hall as if we are actually there. We used to have miking problems before and these guys instantly solved them. The result is the same whenever we are in bigger venues where we share the same hall. Really warm and responsive. We are a choir of 7 to 15 singers by the way. We've been using them for almost 3-years now and they never failed us. If they get lost or broken, we won't hesitate to buy again. I also tried recording with it (vocals + acoustic guitar) and I am so pleased with the result. I'm buying a pair for my personal use and will just use my trusty Shure PG81 to mic my amp. Rea
Question:	Has anyone used these mics for a church choir? Do you believe that these will work well for a church choir
Answer:	If I remember correctly.... it's a 2-pack of mics with mic stand adapters. When I bought them, I don't remember them coming with windscreens. It would have been nice, but I definitely didn't get a dual mic stand adapter (stereo-bar). I just check Behringer's website, and they don't mention what accessories the mics come with. I checked PSSL, a competing store, and they mention inclusion of the stereo-bar and windscreens. They come with a carry case. You'll need XLR cables with XLRs on both ends, NOT XLR to 1/4", as they need phantom power. If your mic inputs don't provide +48 V phantom power, you'll need a 2 channel phantom power power supply, something like the Elite Core PPS-2 (here on Amazon). You can't put betteries into these mics. I've had great luck with GLS XLR cables, they're just as high a quality as the more expensive cables.
Question:	What do these mics come with? (single or 2 pack mic, cables, stand adapters, ect
Answer:	I have bought 2 juicers of different brand. For my old man and mother-in-law. And got this one for myself. According to my experience, their performances are similar. But this juicer has a longer spiral and squeezes more juice. Above all, it costs not that much.

Product description

The PRO MIXER DX626 is a professional high-quality 3-channel DJ mixer with integrated Beat-Per-Minute (BPM) counter, and embodies a proven 3-channel design beloved by DJs worldwide--beginners and professionals alike. Its super-smooth dual-rail "Ultraglide" crossfader with up to 500,000 life cycles guarantees years of trouble-free fun.

Professional 3-Channel DJ Mixer with BPM Counter and VCA Control. Click to enlarge.

Monitor function with master/PFL mix option.

Calculate your tempos with dual BPM counters.

Three Stereo Inputs

The DX626 features three dual input stereo channels with gain and 3-band kill EQ (-32 dB). Kill EQs can be lowered to a much greater extent (-32 dB) than they can be raised (+12 dB), very useful for fading a frequency range out of a music track or other applications.

The first channel is also switchable to studio-grade ULN microphone input, for use with the manual talkover function.

BPM Counter

The PRO MIXER DX626 BPM counter is an extremely useful feature. It ensures smooth transition from one track to the next, making your session an absolute success. It can calculate the various tempi of tracks in bpm (beats per minute). The left display indicates the tempo on channel 2 and the right display shows the tempo on channel 3.

Monitor Function With Master/PFL Mix Option

The PFL signal is your headphones signal. It enables you to preview music without affecting the master signal. The headphone channel signal is taken pre-fader (PFL=Pre-Fader Listening). With the three buttons CH-1, CH-2 and CH-3, you determine the signal source for the headphones signal. Preview the channels individually or listen to all three simultaneously.

Gooseneck Lamp Socket

Connect a commercially available 12-volt BNC lamp and get a better view of your board, even in the darkest gigs.

What's in the Box

Behringer DX626 DJ Mixer, Power Cable, User's Manual

• Professional 3-channel ultra-low noise DJ mixer with state-of-the-art phono preamps
• Intelligent, dual BPM counter
• Super-smooth, long-life Ultraglide faders (up to 500,000 cycles)
• VCA-controlled crossfader for utmost reliability and smooth audio performance
• 3-band kill EQ (-32 dB) and Gain control per channel

User questions & answers

Question:	Can you connect your phone to it
Answer:	The name of the cable is Input: 9-pin male sub “D” connector 9-pin female sub “D” connector note one end is male and the other end is female.
Question:	Can this be used both in US and Europe
Answer:	tHE cABLE IS LIKE 15 TO 20 FEET LONG.
Question:	Can you scratch
Answer:	yes it does.
Question:	using for fitness classes. Ability to speed up/slow down the music throughout the class? Phone music input
Answer:	When I bought it, it came with a lite version of Virtual DJ. Now sure about now.

Product description

BEHRINGER 5 IN MIXING BOARD W EQ. Mains voltage - 120 V~, 60 Hz

• Premium ultra-low noise, high headroom analog mixer
• State-of-the-art, phantom powered XENYX Mic Preamp comparable to stand-alone boutique preamps
• Neo-classic "British" 2-band EQ for warm and musical sound
• Main mix, stereo CD/tape plus separate headphone outputs
• CD/tape inputs assignable to headphone output or main mix outputs. Power consumption 13 W

User questions & answers

Question:	I didn't really understand the inputs on this mixer. So I have 3 electric guitars, and an electronic drum kit. Can all of these,with mic,be connected
Answer:	This mixer does not have sufficient mono channels for your application. Channels 2-3 and 4-5 are stereo inputs (meaning they are contolled with the same fader). Some of the larger Xenyx mixers will get you the inputs you need.... something with at least 5 distinct faders to control each instrument's mix individually.Hope this helps. :-)
Question:	Does this mixer support 48V Phantom Power
Answer:	Most microphones do not require 48 volts of phantom power. Many condenser microphones only require somewhere between 4 and 12 volts. You should check your mic. It looks like this is a 15 volt feed.
Question:	Can this mixer connect to a PC via a soundcard
Answer:	Yes, to an analog soundcard. All you need is a 1/8" stereo to dual-RCA cord. Mixer has both input and output RCA capability, so you could feed the output of the mixer to the line/mic of the soundcard or feed the output of the soundcard (line out/speaker out) to the input of the mixer. There is also a headphone jack on the mixer so that could also be patched back to the soundcard's line in/mic. For me, I am usually running the PC speaker out to the mixer RCA input -- the volume is controlled by the Main, and then I can either use headphones from the mixer or run the 1/4" output into my guitar amp. Hope this helps.
Question:	What does the 2 track input do
Answer:	The 2 track input allows you to connect an external music source to the xenxyx mixer and then into an amplifier with speakers or headphones using the outputs located near the top. The external music source can be anything that has the red and white RCA outputs such as a cassette/CD player or VCR/disc player (the red and white input/output for the 2 track are called RCA connectors). This is so you can plug in your CD player and also a microphone and an instrument that has a 1/4" output such as a guitar or electric piano and have it all mixed together. Just below the 2 track input are a couple of buttons that allow you to choose whichever output you want, either headphones or amplified speakers (main out). The 2 track outputs on the mixer will allow you to send the vocals and/or instrument mix to a recording device that has the red and white RCA inputs. I hope this helps.

Product features

Xenyx 502

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb Xenyx 502, the mixer with everything you need to give an intimate setting incredible sound. The ultra-compact Xenyx 502 mixer’s 5 Inputs (1 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to the studio-grade, phantom-powered Xenyx Mic Preamp and ultra-musical 'British' channel EQ.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our Neo-classic 'British' 2-band EQ for warm and musical soundmixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

The Ins and Outs

The 5-input, 2-bus Xenyx 502 with xenyx mic preamp can accommodate either a dynamic or condenser microphone. The 2-band British EQ is famous for its warm, musical sound. Play music between sets via the RCA CD/Tape Inputs (main mix or control room/phones assignable) and record your performance to an outboard recording device via the RCA outputs.

Small is Beautiful

Weighing in at a mere 1.2 pounds (0.55 kg), the xenyx 502 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

Amazing Value

No matter what your audio mixing needs, the xenyx 502 provides the performance and features that can take your talent to the next level,Professional sound quality, our legendary Xenyx mic preamps, British-style EQs and rugged reliability make Xenyx 502 ideal for both your live gigs and recording. Try one on today – we have one available in your size!

Product description

The UCA202 provides two analog mono inputs and outputs (for monitoring), USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. For a fraction of the cost of many USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Click to enlarge.

energyXT2 makes it easy to manipulate your audio and MIDI file.

Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.

Options Galore

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA outputs: to the TAPE INPUT jacks of your mixer; to powered monitors or to the input channels on the mixer. Connecting to the mixer input channels allows you to use the Aux Send feature of your mixer to build an extremely versatile monitor mix for recording sessions. These are just a few of the possibilities; let us know how you use your UCA202.

No Drivers Required

The UCA202 works with your PC or Mac computer without the need for any setup or driver installation.

Powered via USB

Because the UCA202 is powered by the USB bus, no external power supply is needed. That's one more outlet for all your musical toys.

High-End Audio Quality

The UCA202 features high-resolution 48 kHz converters for high-end audio quality, and the additional S/PDIF optical output allows for direct digital conversion.

Tons of Free Software

Behringer provides a heap of free software available via download, to let you get the most out of your UAC202 right out of the box.

• KRISTAL Audio Engine
  
  KRISTAL Audio Engine is a powerful multi-track recorder, audio sequencer and mixer--ideal for anyone getting started with recording, mixing and mastering digital audio.
• Audacity
  
  Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.
• energyXT2
  
  This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, and turn song ideas into stunning CD or web-ready recordings. energyXT2 includes built-in synthesizers, a drum machine, and internal multi-FX processor.

What's in the Box

Behringer UCA202 U-Control Audio Interface, User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback

User questions & answers

Question:	tv has no audio out but has usb. Will this work
Answer:	You can use it as either. It has Left and Right 1/4 and XLR outputs for stand-alone, and a USB cable if you want to connect it to your computer. Keep in mind, if you do connect it to your computer it will only output a stereo track (2 tracks)
Question:	ASIO Driver
Answer:	I haven't tried it but I don't think it will work. It's made for PC and Android systems. I'm pretty sure the Xbox and ps3 won't recognize it as an input device.
Question:	I want to digitize reel to reel recordings and vinyl LP records. Will this work to input the sound to my laptop
Answer:	The signal strength is great. No direct line of sight necessary. U can actually control the TV box perfectly from another room.
Question:	bit
Answer:	Yes u can use it for quick typing on Ps4, it's not a pc keyboard which would be better fit 2 hand use like a pc keyboard, but if you're like me I prefer this small one it Also don't require a lot of table space like a full keyboard.

Product features

U-CONTROL UCA202

Imagine the Possibilities…

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely versatile monitor mix for recording sessions.

Tons of Free Software

To truly get the most out of your UCA202, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: Record live audio Convert tapes and records into digital recordings or CDs Edit Ogg Vorbis, MP3, WAV or AIFF sound files Cut, copy, splice or mix sounds together Change the speed or pitch of a recording And much more…

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an USB audio interface from other brands, you can have state-of- the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Bridging the gap between your music and the rest of the world—the Behringer U-CONTROL UCA202. Check one out at your local dealer today!

Product description

The SL 85S cardioid dynamic microphone is a performer and home recording enthusiasts dream come true! This professional-quality microphone is designed to capture your sounds with outstanding sensitivity and accuracy. With a cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mics is an excellent choice for any performing or recording scenario – and it’s rugged enough to go The distance! With an integrated shock mount system and spherical wind and pop noise filter and coming packaged with a mic stand adapter and an impact-resistant carrying case, The SL 85S is the only microphone you will ever need.

• Dynamic vocal microphone with On/Off switch
• Smooth mid-frequency presence rises for excellent voice projection
• Ultra-wide frequency response for brilliant and transparent sound
• Extremely high signal output lets your voice cut through
• Cardioid characteristic minimizes background noise and feedback

User questions & answers

Question:	Does it need batteries
Answer:	The typical shielded mic cables should and do work with my pair of these---BUT BUYER BEWARE---THE SUPPLIED THREADED MIC HOLDERS DO NOT FIT AMERICAN MICROPHONE STANDS--MIGHT BE METRIC & NEED AN ADAPTER TO MOUNT ON STANDS HERE. BEHRINGER, SHAME ON YOU TO MARKET TO U. S. CUSTOMERS THIS WAY, BUT GREAT MICROPHONES REGARDLESS

Product features

SL 85S

• Dynamic vocal microphone with On/Off SwitchS
• mooth mid-frequency presence rises for excellent voice projectionU
• ltra-wide frequency response for brilliant and transparent soundE
• xtremely high signal output lets your voice cut throughC
• ardioid characteristic minimizes background noise and feedback
• Designed and engineered in Germany

SL 85S

The SL 85S Cardioid dynamic microphone is a performer’s and home recording enthusiast’s dream come true! This professional-quality microphone is designed to capture your sounds with outstanding sensitivity and accuracy. With a Cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mics is an excellent choice for any performing or recording scenario – and it’s rugged enough to go the distance! With an integrated shock mount system and spherical wind and pop noise filter and coming packaged with a mic stand adapter and an impact-resistant carrying case, the SL 85S is the only microphone you will ever need.

What is a Dynamic Mic?

Dynamic mics have several advantages that make them ideal for live vocal applications and for recording amplified instruments. They’re robust, resistant to moisture and can achieve high gain before feedback. The SL Series’ Cardioid pickup pattern captures the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound. And best of all, dynamic microphones don’t require any phantom power, so all you need is your mic and cable!

Why the SL 85S?

The SL 85S provides an amazingly flat frequency response while incorporating a smooth mid-frequency presence rise for excellent voice projection and includes a two-stage pop filter to minimize breath and pop noises. It features an extremely high output to get your voice out there! And with their tough metal construction and sturdy steel windscreen, you can count on the SL mics to come through after countless gigs and studio applications. We’ve even included a rugged hard case with a mic clip and stand adapter.

Make Yourself Heard…

The SL 85S is built to be your go-to dynamic mics for years to come. It’s high-quality components and extremely rugged construction can withstand the rigors of the bar circuit with ease. And with the included mic stand adapter and carrying case, the SL 85S travels along with all you need in style.

This microphone is an excellent choice for live and studio applications and is available at a price that will leave you with enough cash left over to secure other recording essentials. Check out the incredible SL 85S microphone at a dealer near you.

Product description

• Ultra-compact 4-channel line mixer
• Highest sonic quality even at maximum output level
• Input Level control for each channel
• Power adapter included
• Behringer Micromix MX400 Ultra Low-Noise 4-Channel Mono Line Mixer; 3-Year Warranty Program*

User questions & answers

Question:	How would i use this? i have a behringer mixer and behringer amp. shure mics. do i plug into the mx400 and then into the mixer
Answer:	Yep works just fine, just remember its only a 40w with no extras for sound.
Question:	Is the output of this balanced, or unbalanced? ***I know it's a mono 1/4 plug***, but is it standard unbalanced 1/4, or a balanced 1/4-TRS
Answer:	1/4 inc h
Question:	could it be used to mix 4 cctv mics
Answer:	No. The amp is 110 volt ac.
Question:	I would like to listen to music on my phone and listen the sound of my game on pc, through same pair of headphones. Is this possible
Answer:	yes it does

Product features

MICROMIX MX400

Despite its ultra-compact size, the MICROMIX MX400 4-channel line mixer is really big on features! Providing the highest sonic quality at all output levels vs. the competition, the MX400 features ultra low-noise 4580 operational amplifiers for outstanding audio performance – the same chips as the ones found in its much bigger brethren.

Connections

Expanding on the capabilities of standard-size mixers is where the MX400 works its magic, for instance when it is used as a sub-mixer. If you are running short on available channels on your 'big' mixer and need to add 3 more keyboards to your mix, just connect them to the MX400, dial-in the mix – and connect MX400’s output to a single input on your main mixer. This is just one example of how the MX400 can add versatility to your current setup – just imagine the possibilities!

Small and Superb

The MX400 is the ideal solution for mixing multiple line-level signals on a budget. Sure, it’s as cute as a button – but you’ll want to own one because of what it brings to your performance. And the MX400 is so very affordable. Check one out at your Behringer dealer, or place an online order today!

Product description

Ultra-Compact 9-Band Graphic Equalizer with FBQ

If we all lived in a perfect world, there would be no need for audio equalization. Sound systems would be perfect and would reproduce perfect signals in all their glorious perfection. Also, everyone in that perfect world would like the same amount of bass, midrange and high frequency, and there would be no such thing as feedback. But the world isn't perfect, is it? Even the best sound system can benefit from the use of a good EQ--like the FBQ800.

Even the best sound system can benefit from the use of a good EQ. Click to enlarge.

1/4-inch and RCA inputs and outputs.

Nine steps of graphic EQ.

How Does it Work?

Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these "lanes" represents a single octave of the sonic spectrum. The first four lanes, labeled 63 - 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1 k, 2 k and 4 k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8 k and 16 k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.

Feedback Elimination

When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs--that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. That's why feedback typically gets louder and louder the longer it's allowed to occur. Needless to say, this kind of feedback is very undesirable.

This is where the FBQ800's Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out--voilá, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.

Sonic Toolkit

That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and that's a lot!).

Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as fl oor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.

To Boost or to Cut, That is the Question

Raising and lowering specific frequency bands can improve the frequency response of any room's acoustics. For instance, if the room you're in is "bass-heavy," lowering the 63 and 125 Hz faders can help eliminate an overall "boomy" or "muddy" sound. Likewise, gently boosting the 8 and 16 k sliders can add sparkle to a somewhat "dark" mix. Are the vocals getting lost in the mix? Raising the level of the 1 k slider can help bring them out.

It's important to note that raising a single fader level is not always the best solution; it's often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.

Built for Accuracy and Reliability

Speaking of headroom, FBQ800's 6-digit LED Input/Output meters and level control are provided for precise level maintenance. Longterm reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components may be stacked to create an ultracompact signal processing solution.

What's in the Box

Behringer FBQ800 Ultra-Compact 9-Band Graphic Equalizer, Power Supply, User's Manual

• Ultra-compact 9.5" graphic equalizer for studio and stage applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as Audio Analyzer
• Additional Low-cut filter removes unwanted frequencies, e. g. floor rumble
• Accurate 6-segment LED input/output meters and Level control for precise level indication
• High-quality illuminated faders, potentiometers and illuminated switches for long-term reliability

User questions & answers

Question:	What type of cables are required to hook this up between an amplifier and yamaha receiver? Much appreciated
Answer:	Both
Question:	Can you adjust each channel (left/right) separately
Answer:	Nope, the only things lit are the little indicator lights for power +/- 12dbs and something else.
Question:	I see many mention that they use this for helping hearing loss by using this unit with headphones. My question is how do you use this with headphones
Answer:	They are very clean sounding eqs.
Question:	does it connect to amplifier
Answer:	First, this is not a player. This is a tone control with instead of just the normal bass, treble and high, divides it into 31 (from 20HZ to 20KHZ). Also, this model is mono (1 channel). You can get 2 of these or get the stereo model. You still need an amplifier and a player. You hook this up between a like a CD player and your amp.