14 best bass shaker

Product description

Add a 4th dimension of sensory experience to your home theater by installing a BST-1 Bass Shaker from Dayton Audio! Start feeling what you've been missing!

• The ultimate home theater gadget!
• Add realism to your movies, games, and music
• Delivers incredible impact without high sound pressure levels
• Easy to install onto any flat surface

User questions & answers

Question:	Do these produce audio? i currently have 8 ohm shakers and with the tv sound on 0, the shakers produce loud audio. i only want the vibration
Answer:	It will make audio. If you don't want audible sound you have to filter the inputs to the shaker. It's called a low pass filter.
Question:	can these take 25-35% more wattage over the rated rms
Answer:	Yes they (it) can. However, you need to keep an eye how hot its getting. I use a temperature activated computer cooling fan on mine.
Question:	would a single one of these be better than two of the Dayton Audio pucks
Answer:	I haven't done a direct comparison between the 2, but also depends on the application. The audio puck is small, less powerful, available in either 8 or 16 ohms. I bought 2 of the bst-1's 4 ohm for my couch on each end, opposing each other, wired in series to get 8 ohms. I also wired one of them in reverse polarity so that they would be in phase with each other. It really feels like you're there, in the movie or video game. Most household amplifiers are stable at 8 ohms, and most car amps are stable around 4 ohms or less.
Question:	If I have an 18" woofer, would I need a shaker
Answer:	Depends on usage. At home? Can add nice tactile bass experience without needing the high volume an 18" woofer does for the same sensation. I use my BST-1 under my mattress, on top of the box spring. I can feel lows that are barely audible, which the roommates appreciate. For an open venue, 18" woofer is fine, while a BST-1 has very limited application, IMO. I mean, I was to DJ a beach party last weekend, BST-1's don't work on the sand, could have used an 18" woofer. At a houseboat party I have DJ'd at, the BST-1 turns the hot tub into a subwoofer, so there an 18" and BST-1 are both welcome and useful. I can't cover every possible use, I hope the 3 examples given will help you.

Product description

Dayton Audio's TT25-8 PUCK is a small, 8 ohm tactile transducer or mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications.

• Quality construction and economically priced
• Add tactile feedback to chairs and couches for the ultimate gaming and movie experience
• Small and easy to install

User questions & answers

Question:	Can 4 units be placed under a king sized bed, with 2 people in it (600lbs total weight
Answer:	Might need more than 4 units.... they also get hot! Plus you need to mount them to the bed frame not just place it under the mattress
Question:	is this a pair or a single
Answer:	Mine was a single. Since I wanted two, I had to place an order for a quantity of 2.
Question:	Can I install this into a boombox type speaker or is it too powerful
Answer:	You won’t get any sound from this. Shakes the heck out of our movie chairs.
Question:	Can I used a A/V receiver with this instead of an AMP
Answer:	No, this needs an amp. You can buy a cheap car subwoofer amplifier like this one: https://www.amazon.com/BOSS-Audio-R1100M-Monoblock-Subwoofer/dp/B004S4XNEO Since it's 1100W (theoretically), I would wire all of the bass shakers in series, and connect to the amp above.

Product description

The Bass Shaker products allow you to experience every thump, thrust and shake...the way bass sound was originally intended. Mount the bass shaker firmly onto the object or furniture you want to vibrate. It must be mounted to something solid, like wood. The bass shaker produces a vibration at about 40Hz. Wire two together in series for an 8 ohm load or use a single at 4 ohm. Does not require a crossover. Only a 50 to 100 watt amplifier is needed to power it. Higher wattage is okay of course. Connecting two in parallel is a 2 ohm load, too low for most amplifiers. Here is how you add bass shakers to your home theater system: 1) Find the variable low-level RCA output for the subwoofer (LFE) channel on the rear panel of your AV receiver and disconnect the cable going to your powered subwoofer. 2) Connect a RCA Y-cable to the subwoofer output on your receiver. 3) Connect the cable from your subwoofer to one end of the Y-cable. 4) Connect a cable to the remaining unused end of the Y-cable to an input on the amplifier being used to power the shakers. 5) Connect the shakers to the output of the amplifier. 6) Set the relative level of the shakers by adjusting the volume control on the amplifier driving them.

• 50-Watt Pro Bass Shaker
• 5.4 x 2.2" Frame
• Impedance @ 4 Ohms and 40 Hz resonance frequency

User questions & answers

Question:	The product description says the shaker is 5.4" wide - is this accurate? What is the spacing for the mounting holes
Answer:	The outside diameter to the fins is 156mm or 6.14". The bolt hole circle diameter is 143.5mm or 5.65". It will take a #8 screw. The actual vibrating area on the bottom is 130mm or 5.1".
Question:	What's the best amp to use with these? Cheap but decent quality preferred
Answer:	I use a behringer inuke nu1000dsp, it works really good for 3 aura pros. sorry but I can't even remember where I got it from, but I think I paid 175 bucks on sale new. to me these shakers work as good as the ones that are a lot more expensive like buttkickers.
Question:	Is the enclosure made out of metal or plastic
Answer:	I believe it is made partially out of metal and some type of polymer material. Likely some time of Polypropylux (very sturdy and strong plastic material that has many uses).
Question:	Can I just hook one of these into the Preamp output on my amp and attach to my chair. I will be using it in my audio system, not home theater
Answer:	Gary these transducers are rated at 50 watts. A preamp output is not what you should consider for driving this load. Think Amplifier not Preamp! An amp that is capable of more than 30 to 35 watts should be best suited for this purpose. If you download the manual for this product you can find warnings not to surpass the 50 watt per unit rating. All* of those prior answers were Internet noise. #1. Neither helpful nor informative #2. Borderline helpful but not informative #3. What? & Wrong! #4.* I might be too hard on Sara. She is right to drive a group of these with hundreds of watts of power and Sara is also correct in guessing that the low preamp power will not work with the Bass Shaker. My contention with her response is that the harm of testing is that it is a complete waste of time. It is sort of trying to see if your toaster will work without power. How could it?

Product description

Elevate your home theater and gaming systems to a whole new level with Dayton Audio's BST-2 bass shaker. The BST-2 tactile transducer allows you to feel ultra-low bass frequencies without requiring the extremely high SPL levels that are necessary when using just a subwoofer. Add Dayton Audio's BST-2 bass shaker to any sound system to truly feel what you have been missing.

• Increase the realism of home theater and gaming systems for a more immersive experience
• Add low frequency tactile impact without ridiculous SPL levels
• Cast aluminum housing dissipates heat for reliable performance
• Attached 24" leads for easy connections in hard to reach installations
• Easy to install on any flat surface

Product description

The BK-mini-LFE mini LFE from ButtKicker is designed for use on a single seat or video game chair, and adds the 4th dimension of sound to your video games and music without disturbing others.

• Single-serving buttkicking
• Smallest ButtKicker mounts directly to seats
• Patented magnetically suspended piston design
• Lower frequency response than nearly any other tactile transducer
• Nearly indestructible design, with thermal cutoff switch

User questions & answers

Question:	How do I hook it up to a surround sound 5.1 system
Answer:	You need an Amplifier. ButtKicker sales their own brand or you can buy a third party brand.
Question:	what type of amplifier is good enough for this bass shaker
Answer:	50w minimum. but I recommend at least 120w.
Question:	what kind of cables are used to hook this up? is it just simple speaker wires like any other speaker
Answer:	Yes, you should use speaker wire. Think of the Buttkickers as a silent subwoofer. They vibrate in synch with the subwoofer channel and supplement your subwoofer(s). You will need an amp to power the Buttkickers also. You usually need a dedicated amp.
Question:	Are these the latest revision of the mini lfe's which have the simvibe edition features incorporated into them
Answer:	I can only speak for our own shop. But the stock we have are the latest version ButtKicker BK-mini-LFE.

Product description

Low Frequency Effects ButtKicker version for Home Theater use - 4 ohm

The only tactile transducer designed specifically to take advantage of the 0.1 and LFE (low frequency effects) channels, the ButtKicker LFE features extended low-frequency response for powerful bass and special effects. If you are looking to delight and electrify yourself and others with an affordable and easy-to-use solution, now is the time to incorporate the ButtKicker into your sound-system's design and feel what you've been missing.

The ButtKicker LFE Low Frequency Effects System utilizes a patented magnetic suspension and can be used in couches, theater seating, platforms, and any type of structure. Different from other shakers or tactile transducers that use voice coil technology, the ButtKicker is much more powerful, more musical (linear), and offers true infrasonic, or low-frequency response with a resonant frequency of 9 Hz. The ButtKicker LFE utilizes a small, linear motor, which reacts to an audio signal sent by an amplifier.

The system is similar to a loudspeaker, but instead of moving a cone and transferring sound waves through the air, it attaches to seats and floors, and sends low-frequency sound directly into the listener's body to accurately reproduce the "feeling" range of many natural and man-made sounds, such as earthquakes, thunderstorms, sound effects, and all styles of music. One ButtKicker LFE will easily replace two, four, or more voice coil-type shakers, and it is virtually indestructible and maintenance free. The ButtKicker LFE is used in everything from theme-park attractions and specialty theaters, to car-stereo systems, and custom home theaters.

The ButtKicker LFE Low Frequency Effects System is small and unobtrusive, but powerful. Measuring only 5.375 x 5.5 x 5.375 inches (WxHxD), the ButtKicker weighs 11 pounds, and has a frequency range of 5 to 200 Hz. This unit has a nominal impedance of 4 ohms, and a power handling that ranges from a minimum of 400 watts to a 1,500-watt maximum.

• Offers true infrasonic, or low-frequency response with a resonant frequency of 9 Hz
• Attaches to seats and floors, and sends low-frequency sound directly into the listener's body
• Accurately reproduce the feeling range of many natural and man-made sounds
• Power handling ranges from a minimum of 400 watts to a 1,500-watt maximum
• Measures 5.375 x 5.5 x 5.375 inches (WxHxD), and weighs 11 pounds

User questions & answers

Question:	Where would you mount this in a car? Also how would you mount this to a car
Answer:	Typically in the trunk. It's too tall for anywhere else. But it's not your best choice for a car anyhow; this thing requires a LOT of power. It's moving a big piston. And it's heavy, while you want your car light for performance. An Aurasound or Clark Synthesis transducer is smaller, easier to mount to your seat's underside and more power-efficient. They won't -thump- as much, but they're better choices.
Question:	What is the best amp for this. Try to be spacific
Answer:	I called and talked with ButtKicker, they said the Dayton SA-1000 was the best and was equal to thwir amps. There is a company called Partsexpress.com with the best price, 398.00
Question:	How many of these bad boys do I need to power a row of 4 home theater seats? 4? Or can I get away with
Answer:	As long as the seats are attached solid you would be fine with 2 BK-LFE. You would also require an amplifier to power them.
Question:	will one of these be suitable for a u shaped sectional couch? Each sectional (5 pieces) is attached by only a metal linkage
Answer:	In your case, in all probability, only the section that the Buttkicker is mounted to will experience any significant shaking since you need a really SOLID mechanical connection between the Buttkicker and the sofa, and between the sections to transmit the vibrations. It would be a good idea to check out some of the YouTube videos on mounting Buttkickers to sofas/chairs. BTW, I recommend mounting the Buttkicker to the frame of the sofa, rather than using the Under-leg Mounting Kit. The reason is that when the device is mounted to the frame of the sofa, you get forces transmitted to the structure on both the upward and downward strokes of the Buttkicker internal piston, whereas when you use the under-leg mounting method, the Buttkicker is driving its force into the floor with little motion for half of each cycle.

Product description

Quick tips: 1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on. Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don't worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it's normal and safe. Parameter: 1. Power supply range: 12-24V; 2. THD: ≤ 0.04%; 3. Frequency Range: 20Hz - 120Hz (±1 dB); 4. SNR: ≥ 98dB; 5. Input sensitivity: ≤ 280mV; 6. Terminating impedance: 2Ohm - 8Ohm; 7. Output power: 220W Peak for Subwoofer; 8. Input mode: RCA ; 9. Power supply: 24V / 4.5A; 10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.

• Built-in low pass filter, 220W(2 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful;
• Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use
• Adopt Texas Instruments TDA7498E chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
• Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound;
• What You Get: TP-02 subwoofer amp x1, power adapter x1, AC cord x1, user manual x1, 18-Month global warranty, and 24-Hour quick customer service.

User questions & answers

Question:	Can I connect a smart tv to amp then to a subwoofer
Answer:	If your smart TV has Audio Out RCA type jack's, you could theoretically hook it up, but that would not be a subwoofer specific signal. It would work better if you connect your smart TV to a multichannel surround sound amplifier ( usually with and HDMI cable). The amps typically have an RCA output jack on the rear specifically for subwoofers. You then run a RCA connector cable from that jack to the input jack on this subwoofer amplifier, and attach the speaker output connectors to a good sized non powered speaker (also called a driver) and you're good to go.
Question:	As the source volume increases does the subwoofer volume
Answer:	Yes. The volume of the subwoofer will increase. Hope to help you. Thanks!
Question:	will this power one 4 ohm 10 inch subwoofer and does it come with power cord
Answer:	Yes, it can drive 2-8ohm subwoofer. Equipped with 24V/4.5A power adapter.
Question:	Can you please share the dimensions of the box -- not just the package
Answer:	The dimensions of the unit itself are: height - 1-9/16", width - 3-5/8", depth - 4-1/4"

Product features

Mini Compact Subwoofer Amplifier

• Power Adapter:24V/4.5A
• DC Input Range: 12V-24V
• Terminating Impedance: 2 Ohm - 8 Ohm
• MAX Power Output: 220Watt @2Ohm
• Input Mode: RCA
• Full Frequency Response Range: 20Hz-20KHz(± 3db)
• Bass Frequency Range: 20-200Hz
• Input Sensitivity: ≤ 280mV
• SNR ≥ 98dB
• THD ≤0.04%

Adopt Texas Instruments TPA3116 chip

No pop, no audible noise, dead silent when nothing is playing through it;

Mini but Powerful

Small simple compact design but practical and powerful;

220W MAX Power Output

Can be carefully matched with this home mono integrated amp physically as well as electrically;

Product description

For PC & Console Gaming and Digital Music-attaches to most center post chairs. Includes gamer, Gamer Amplifier and all wiring. 120V version, for North American use only.

From the Manufacturer

The ButtKicker BK-GR2 Gamer is awesome for gaming, simulation, computer entertainment, and digital music playback. This device works with all computer systems and all gaming consoles, and allows you to feel the gut-wrenching punch of machine-gun fire, the pounding of chopper blades, racing engines, gear-shifts, explosions and more. With the ButtKicker Gamer you can experience powerful bass even while you're using headphones.

But what is it and how does it work? The ButtKicker is a small linear motor that reacts to an audio signal sent by an amplifier. The ButtKicker Gamer comes with its own 90-watt amplifier that is convection-cooled with vents so there’s no noisy fan. It also includes a wired remote control so you can stash the amp out of sight and still operate its core features. It is similar to a loudspeaker, but instead of a moving a cone and transferring sound waves through the air, the ButtKicker Gamer is attached to your seat and sends a low frequency sound directly into your body. The effect is amazing.

The human body uses two senses to perceive full-range sound. We hear sound, but we also feel it, especially low frequencies. Traditionally it takes big speakers to move a tremendous amount of air for us to feel low frequency sound. That's why so many people love loud concerts -- they want to feel the music as well as hear it. The ButtKicker Gamer reproduces the feeling range of audio in a more direct way than through air movement. The perception is actually better, plus the sound pressure disappears. For example, when using headphones with the BK-GR2, you'll still perceive powerful, musically accurate, concert-level audio, but no one else will hear anything.

The ButtKicker Gamer can take your gaming experience to an awesome level without angering your neighbors. To get the full effect of exciting, action-packed video game titles you'd normally need a huge audio entertainment system that you could pump up to a disturbing-the-peace level. The ButtKicker Gamer solves the problem and adds the big bass feeling without the giant, disruptive volume.

Designed to be responsive and aggressive, the ButtKicker Gamer answers the need for both accurate low frequency response and maximum immersion. Video games, sim racing and flight simulators have never been so realistic or intense.

What They're Saying

From "iGames" magazine

I wasn't sure what fate had in mind when I unpacked the Buttkicker and got it set up. I know that many of you think “buttkicker” and think of an older brother or cousin beating the tar out of you for no reason. No my friends, this is a device that enhances your overall “entertainment” experience by amplifying low frequency sounds and it connects to a chair.

International Flight-Sim Convention

The winner of this year's CES Innovation Award didn't go to some great computer device that makes computers quicker or quieter, or to anything with a lowercase I before it's name, but rather to a product that straps onto your chair, sends thumping vibrations through your seat.

Hardware-Review.net: Buttkicker Gamer

When you're gaming at LAN parties or with a bunch of friends in a garage or basement, using your 5.1 stereo sound system when you're fragging them isn't an option. So, what are you going to do when you want that "bass feel", but you have to use headphones? The ButtKicker Gamer was designed with this purpose in mind, and we just happen to have one on our test bench to review today.

What's in the Box

ButtKicker BK-GR2 gamer, Easy Clamp attachment mechanism, 90-watt amplifier with optional standing feet, 13.5-foot cable, RCA and mini Y adapters, five-foot RCA-to-RCA cable, five-foot RCA-to-mini cable, and two Velcro cable ties.

• 90 watts at 2 ohms
• Wired remote control
• Mounting flanges for use with home theater seating
• Digital; fanless; 120v ONLY
• Pass-through outlet to daisy-chain multiple units

User questions & answers

Question:	Does this have an in coaxle rca
Answer:	No
Question:	So you need splitters for this to work on xboxonex or ps4 pro
Answer:	For me, yes. I have a 7.2 home stereo system and all I did was split the left side subwoofer RCA cable to the Buttkicker amp.
Question:	Is this "ButtKicker BK-GR Gamer2" ? Or "ButtKicker BK-GR Gamer
Answer:	It is ver 2 the new model and yes it is improved.
Question:	Looking to use this on a pc sim rig, but i use a log usb wireless headset. from what i have read it can be very difficult to setup, is there a fix
Answer:	This has zero to do with your headset. It’s just a glorified sub. The only wire that dictates length is the one going from the amp to the shaker. You could cut the shaker cord and splice it but I can’t imagine you being that far away. This unit has nothing to do with usb connections. You could hook it up to a home stereo.

• G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
• Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
• It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
• It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
• 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.

User questions & answers

Question:	When using this with a subwoofer how do I know where to set the frequency cortrol knob
Answer:	Without having a proper test microphone and measurement software (such as SMAART), you could use a sine wave generator (or a collection of prerecorded sine waves from 40-200 Hz) and a sound pressure meter (or sound pressure phone app). The accuracy of low frequency sound pressure measurements will depend on your telephone. Google subwoofer setup procedure.
Question:	When using in sub mode, which rca input to plug in? left or right or both
Answer:	Hello. Please see our second main image. The "audio in" rca posts are connected to sound sources. The "spk out" posts are a set of speaker binding posts. When in sub mode, you need to connect your passive subwoofer with bare wire or banana plug. If you still have questions, you can send your device models and images to [email protected]. We will help you with it.
Question:	Why are there left and right inputs for a mono amp? If you have a mono source, can you plug it into only one input, or do you have to connect to both
Answer:	Hello. We have a using guide picture in the listing. You can check that. We have left and right inputs since some customers using stereo signal. If yours are mono, just connect one input.
Question:	will this power a 50 watt bass shaker
Answer:	This amp cuts off at 20 Hz with presumably a subsonic filter, how can it power bass shakers? You need to go down to 5 Hz for that.

Product features

How to use

(A) SUB Mode

1. Use RCA cable to connect your audio sources like Phone / MP3 / PC / TV ... to the "AUDIO IN" port
2. Use speaker wire or banana plug to connect your passive subwoofer to the "SPK OUT" port
3. Connect the power supply with the amp firstly and then to the wall
4. Turn the toggle to "SUB"
5. Turn the toggle to "ON"

(B) Mono Channel Mode

1. Mono channel means single right channel or left channel. If you want to drive stereo speakers. you need two of this amps to drive right and left speakers separately
2. Use RCA cable to connect your audio sources like Phone / MP3 / PC / TV ... to the left or right "AUDIO IN" port
3. Use speaker wire or banana plug to connect your left or right speaker to the "SPK OUT" port
4. Connect the power supply with the amp firstly and then to the wall
5. Turn the toggle to "PBTL"
6. Turn the toggle to "ON"

SUB & PBTL MODE

• G2 can be used as a mono channel amp or a sub amp. You can use one G2 to drive a passive subwoofer, or use two G2 to drive normal left and right speakers independently (bridge).

GAIN CONTROL

• A gain switch on the bottom of the amplifier to allow 4-level of output level setting (20/26/32/36 dB), to keep the sound quality better and not affected by the the resistor part.

SMALL SIZE & LARGE POWER & EXCELLENT CIRCUIT

• Small simple compact design but practical and powerful. 100W @ 4ohm mono channel amp can drive most home passive speakers or subwoofer.
• Built-in speakers protection circuit, solid aluminum chassis for long time use; built-in low pass filter for subwoofers with sub frequency control
• Equipped with 19V 4.74A high quality power supply to ensure stable and powerful output.

Nobsound G2

• Power Supply: 19V 4.74A
• Max power: 100W @2Ω ; 70W @4Ω ; 50W @8Ω
• Full frequency response: 20Hz-20kHz(±3dB)
• The speaker matches the impedance: 2-8Ω
• THD: Output 1W@ 0.03%
• Working voltage: DC12-24V
• SNR: ≥106dB
• Input sensitivity: 0.775V
• Bass cutoff frequency range adjustment: 40-300Hz
• Slope of bass attenuation: -12dB Slope

Product description

Feel the bass! With 4 Dayton Audio BST-1 pro bass shakers bundled with the Dayton Audio BSA-200 bass shaker amplifier, this package has the raw power you need to add some serious rumble to your audio, video or gaming set-up.

• Dayton Audio BSA-200 capable of 230 watts RMS provides plenty of power
• 4 Dayton Audio BST-1 pro bass shakers each capable of up to 100 watts max
• Feel earth shaking bass from your music, videos, and games like the pros
• Dayton Audio BSA-200 capable of running stereo or mono for added wiring flexibility

User questions & answers

Question:	Does this have the wireless transmitter? Thanks
Answer:	No it doesn't you would have to buy it separate,I bought the svs wireless transmitter and it works great..
Question:	How do you wire 4 bass shakers to this amplifier
Answer:	It comes with instructions
Question:	Is there wiring and hardware included
Answer:	No. The wiring speaker wiring can easy be found at any electronics store. Best Buy , Fry's or on Amazon. The attachments of the Bass Shakers depends on your furniture framing. In my case, i added a small 6X6 wood plate to the framing and attached the shakers. No regrets! I love the addition movie experience.

Product description

Specifications:

Working Voltage: DC12V-24V;

Max Power: 100Watt 4Ohm

Full Frequency Response: 20Hz-20KHz(+-3db)

Bass Cut Off Frequency Range: 40-300Hz;

Slope of Bass at Tenuation: -12db slope;

Input Sensitivity: 0.2mV;

SNR: >106dB;

THD: <0.03% output 1W;

Size: 119mm x 98mm x 33mm;

Weight: 1kg;

Package list: M02 power amplifier *1, 19V power supply *1, User Guide *1, 18-month warranty;

• ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopts with the Instruments TPA3116 chip, NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
• ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
• ❤【Mini Compact but Powerful】Built-in low pass filter for subwoofers with sub frequency control, small simple compact design but practical and powerful.
• ❤【Home Hi-Fi amplifier】Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound; Ship with 19v 4.7A power adapter.
• ❤【High Quality After-sale Service】 With 18 months warrenty and 24 hours after-sale service online to provide you the great shopping exprerience.

User questions & answers

Question:	Will the mo2 work with an preamp subwoofer out from a pioneer vsx-d508 receiver or does it require line level inputs
Answer:	Power cable is 78” total. From right angle 3-prong plug molded onto the 14-2 Romex equivalent power cable to the pre-stripped ends. Realistically an in wall run of 5 foot max.
Question:	Can i use a single to dual rca cable (single lfe from receiver, dual rca to l r on amp
Answer:	yes, panamax should work with converter from 220v to 120v.
Question:	I have a stereo 3.5 mm audio connector from my source. can i use adapter from 3.5 mm into split (l&r) rca connectors for input? safe to join commons
Answer:	Yes & No. It will work but the AVM high volt shut off point will be reduced to approximately 130VAC. So you would want to use the lowest output voltage setting on the Stepdown transformer. I would suggest the 110VAC output.
Question:	Wouldn't this be underpowered for a 4 ohm 8inch 200watt peek sub compared to the same sub at 8 ohms
Answer:	That would be correct if you want the incoming signal protected. A power spike on the incoming signal should be stopped before it gets to the equipment. Cat 5/6 or phone line can be protected the same way. I love this power conditioner.

Product features

Subwoofer Amplifier Full-Frequency Mono Amp

• Power Adapter: 19V/4.74A
• DC Input Range: 12V-24V
• Terminating Impedance: 2 Ohm - 8 Ohm
• MAX Power Output: 100Watt @4Ohm
• Full Frequency Response Range: 20Hz-20KHz(± 3db)
• Bass Frequency Range: 20-200Hz
• Input Sensitivity: ≤ 0.2mV
• SNR ≥ 106dB
• THD ≤0.03%

Fosi Audio Exclusive Design

Switch to PBTL, it's a Full-Frequency Mono amp for driving passive speakers. Switch to SUB, it's a subwoofer amplifier for diving passive subwoofers.

High Efficient Power Output

Adopt Texas Instruments TPA3116 Chip, MAX power output up to 100Watt. Strong internals make for A lively listen.

Upgraded DC Outlet

The old version or other brand amplifiers sparks flying when power supply plugin, it's unsafe. With a built-in power protection circuit, there are no sparks flying when you plug the power adapter into the amplifier. Safe for use!

DIY Your Audio System

This amplifier gives you the power and versatility you need to create a professional sound system. Great amp to driver most home bookshelf speaker or subwoofer.

Solid Built Aluminum Alloy Enclosure

Curved edges and sleek controls accentuate its unibody design. With truly useful features, and thoughtfully designed premium enclosures.

19V/4.74A Power Supply

Fosi Audio M02 amp comes with the energy-efficient and stable power supply which got authoritative certification by many security tests, can get an astonishing sound.

Product description

"The Earthquake Sound MQB-1 easily attaches to individual theater chairs, recliners, sofas, or even large platforms that house several chairs. In an ever-growing world of AR/VR systems, the MQB-1 allows the users to feel what they are experiencing and is the ultimate solution to complete any AR/VR experience. The MQB-1 can also bring that extra piece of reality and accuracy to any digital simulation. The Neodymium magnet is up to seven times as powerful as a standard Ferrite magnet. It uses the same patented technology as its big brother, the Q10B, which allows it to be the most powerful, accurate, and sensitive tactile transducer on the market today. Do not let the size ofThis thing fool you either. At only 3 1/2" tall and 3 1/8" in diameter, including the mounting feet, the MQB-1 punches well above its weight class. The MQB-1 can turn any audio, video, or gaming system into a truly augmented reality experience adding another dimension to home. The Quake Series of Tactile Transducers is an awe-inspiring sub-harmonics unit designed for special effects enhancement. You can now add super-sensitive low frequency effects without using costly hydraulics or a bulky and expensive subwoofer. The Quake Tactile Transducers virtually eliminate low-end resonation into adjoining areas. Designed for superior music quality, the Quake Tactile Transducer answers to the need for both accurate low-frequency response and maximum tactile effect in your home or car. Multiple transducers can be bridged from the same output. View larger An awe-inspiring, sub-harmonic unit for special effects enhancement. View larger With only one moving part and a cast aluminum heat sink for excellent heat dissipation and protection from damage, the Quake Series of Tactile Transducers are maintenance free-and practically indestructible. And don't be fooled by the size of the MQB-1 as it can shake your seat and give you that tactile effect you will need to your audio experience. Achieve Deep Impact Effects Whether you are at home enjoying your favorite movies and music or even video game, the MQB-1 Tactile Transducer is the perfect solution for deep impact tactile effects. The MQB-1 easily attaches to individual theater chairs, recliners, sofas, or even large platforms that house several chairs. In addition, they can be mounted to office chairs and thrones for a cool music integration or gaming experience. The MQB-1 uses the same impeccable technology as its big brother, the Q10B, which allows it to be the most powerful, accurate, and sensitive Mini Tactile Transducer on the market today. At only 3-1/2" tall and 3-1/8" in diameter including the mounting feet,This unique little hot rod can be mounted in almost any location. Plus, it stays running cool and efficient for hours of perfected effects. MQB-1 8-Ohm Standard Connection The subwoofer output on your receiver or pre-amp can be bridged to provide power for both your subwoofer and the MQB-1. Enjoy tactile effects from your MQB-1 along with bass from your subwoofer. Multiple transducers can be bridged from the same output. About Earthquake Earthquake Sound Corporation, located in the heart of the Silicon Valley, specializes in manufacturing high-end home and car audio products ranging from the smallest driver to the loudest subwoofer system. In its dedication to excellence, Earthquake has maintained extensive programs in research and development to provide you with the highest quality audio products. Technical Specifications Recommended Amplifier Power: 20-500 watts Impedance: 8 Ohms Frequency Response: 15 - 50 Hz Dimensions: 3-1/2" x 3-1/8" x 3-1/8" (88.9mm x 79.4mm x 79.4mm) "

From the Manufacturer

The Quake Series of Tactile Transducers is an awe-inspiring sub-harmonics unit designed for special effects enhancement. You can now add super-sensitive low frequency effects without using costly hydraulics or a bulky and expensive subwoofer. The Quake Tactile Transducers virtually eliminate low-end resonation into adjoining areas. Designed for superior music quality, the Quake Tactile Transducer answers to the need for both accurate low-frequency response and maximum tactile effect in your home or car.

Multiple transducers can be bridged from the same output. View larger







An awe-inspiring, sub-harmonic unit for special effects enhancement. View larger

With only one moving part and a cast aluminum heat sink for excellent heat dissipation and protection from damage, the Quake Series of Tactile Transducers are maintenance free-and practically indestructible. And don't be fooled by the size of the MQB-1 as it can shake your seat and give you that tactile effect you will need to your audio experience.

Achieve Deep Impact Effects

Whether you are at home enjoying your favorite movies and music or even video game, the MQB-1 Tactile Transducer is the perfect solution for deep impact tactile effects. The MQB-1 easily attaches to individual theater chairs, recliners, sofas, or even large platforms that house several chairs.

In addition, they can be mounted to office chairs and thrones for a cool music integration or gaming experience. The MQB-1 uses the same impeccable technology as its big brother, the Q10B, which allows it to be the most powerful, accurate, and sensitive Mini Tactile Transducer on the market today. At only 3-1/2" tall and 3-1/8" in diameter including the mounting feet, this unique little hot rod can be mounted in almost any location. Plus, it stays running cool and efficient for hours of perfected effects.

MQB-1 8-Ohm Standard Connection

The subwoofer output on your receiver or pre-amp can be bridged to provide power for both your subwoofer and the MQB-1. Enjoy tactile effects from your MQB-1 along with bass from your subwoofer. Multiple transducers can be bridged from the same output.

About Earthquake

Earthquake Sound Corporation, located in the heart of the Silicon Valley, specializes in manufacturing high-end home and car audio products ranging from the smallest driver to the loudest subwoofer system. In its dedication to excellence, Earthquake has maintained extensive programs in research and development to provide you with the highest quality audio products.

Technical Specifications

• Recommended Amplifier Power: 20-500 watts
• Impedance: 8 Ohms
• Frequency Response: 15 - 50 Hz
• Dimensions: 3-1/2" x 3-1/8" x 3-1/8" (88.9mm x 79.4mm x 79.4mm)

• Optimized for use with AR/VR systems, the transducer brings rumble effects to your chair or couch
• Universal mounts, including chair and platform mounting; Great with simulating application
• Rugged cast aluminum heat sink
• 1.5-inch excursion @ 22 Hz
• Neodymium magnet and integrated thermal protection circuitry

User questions & answers

Question:	Does this transducer ever bottom out? The larger unit costs a lot more
Answer:	I use 2 of these MQB-1 Transducers in a series of three. Meaning I've got 2 Earthquake and 1 ButtKicker transducer units in series that plays off of a separate additional 1000A amplifier (ButtKicker BKA-10004A Amplifier). The Buttkicker transducer can absorb and output a lower frequency (rumble) signal so I set my ButtKicker amplified to 70 Hz to protect the earthquake units. Can you bottom these units out...Yes, of course. The volume for the output is critical. Experimentation is needed, too loud and the units float (bottom out) versus not enough energy and the response is muted. I set the ButtKicker Amplifier volume at the 11 o'clock position for Blu-Ray playback and the 1 o'clock position for Cox On-Demand and NetFlix playback. I cannot answer how to set up a different amplifier and your back to experimentation. The Earthquake support helpline is of invaluable assistance if you can't get your system optimized.
Question:	Does Earthquake have a recommended amplifier that goes with this
Answer:	No. I am using a Crown XLS 1002 which is more than enough power in bridged-mono mode with 2 of these in parallel.

Product features

QUAKE Tactile Transducer System

The MQB1 Tactile Transducer is a sub-harmonics unit designed to immerse your senses and bring your digital entertainment and simulation to reality. You can now add super-sensitive low frequency effects without using a costly sub-harmonic subwoofer. The MQB-1 Transducers virtually eliminate low-end resonation into adjoining areas. Earthquake Sound recommends its XJ300ST amplifier (sold separately) to be used with one or two MQB-1 as illustrated below. For both accurate low-frequency response and maximum tactile effect in your home theater, gaming simulators or car audio, the MQB-1 is the right choice. Thanks to its size, it can also work with any VR/AR system.

Achieve Deep Impact Effects

With only one moving part and a cast aluminum heat sink for excellent heat dissipation for endless use, the Quake Series of Tactile Transducers are maintenance free-and practically indestructible.

Whether you are at home enjoying your favorite movies and music, or even video games, the MQB-1 Tactile Transducer is the perfect solution for deep impact tactile effects. The MQB-1 is the missing link in any VR or AR environment. The synchronized vibrations bring the experience to life.

About Earthquake Sound

Earthquake Sound Corporation, located in the heart of the Silicon Valley, specializes in manufacturing high-end home and car audio products ranging from the smallest driver to the loudest subwoofer system.

In its dedication to excellence, Earthquake has maintained extensive programs in research and development to provide you with the highest quality audio products.

Product description

Dayton Audio DAEX25 Sound Exciters turn virtually any solid object into a speaker by vibrating it at speeds of up to 20,000 cycles per second. Test the limits of your imagination.

• Turn any solid surface into a great sounding speaker system
• Create a completely hidden surround sound system
• 3M adhesive pads for secure and fast placement
• Wideband frequency response (dependent on attached material)

User questions & answers

Question:	could these be concealed behind a bookcase or couch (with a gap)? or do they need to be unobstructed
Answer:	I think that the only problem would be that the sound will be obstructed but I don’t why you cannot do it.
Question:	Will they work pressed up against a surface for temporary location or does it have to be stuck on with the adhesive
Answer:	Pressing them against the surface will prevent the transducer from vibrating. They work just like a speaker, minus the cone. They can be relocated. New 3m double sided works or hot glue's great too.
Question:	Im assuming these have an impedance rating, but its not listed or mentioned; whats the impedence rating, in ohms
Answer:	According to what I've found elsewhere, 8 ohms of impedance, 5 watts RMS, 10 watts peak.
Question:	Can these get as loud as say, a $30-50 pair of computer speakers w/o distortion? Thinking of using with a projector for movies, powered by a T-amp
Answer:	Hi, they can handle a lot surprisingly and don't distort too bad depending on what type of surface you put them on. They have a 3M back adhesive and make sure you clean the surface they are going on so they stick really well(rubbing alcohol). I have this type amp Lepai LP-2020A+ Tripath Class-T Hi-Fi Audio Mini Amplifier and this thing is really nice. It has treble and bass as well with tone and direct. They bass is pretty good but you might want to pair it with some tweeters. If you want the rumble and don't care about High-highs then they will be feet your needs. Just play around with the volume you're going to be using them @ and adjust treble and bass until you're satisfied.Hope that helps.

Product description

Add a little extra oomph to your home theater, gaming or music setup. With 2 Dayton Audio BST-1 Pro Bass Shakers and the Dayton Audio BSA-200 Bass shaker amplifier this bundle packs a punch.

• Feel earth shaking bass form your music, videos, and games like the pros
• Dayton Audio BSA-200 amplifier with built in low pass filter provides plenty of power
• 2 Dayton Audio BST-1 Pro tactile transducers, each can handle up to 100 watts max