14 best in ear wireless monitors

Product description

IEM1200 wireless In Ear Monitor System 2 Channel 2/4 Bodypack Monitoring



LCD display shows clear working status

Metal Bodypack Receive

Low battery remind of bodypack receivers

2 power switch control

Have a mout in the both side of the machine, easy to setup

Strong signal, UHF frequency

Digital tone key locking technology to avoid possible interference

40 preset channels separately by 4 groups, can be adjustable

Effective distance:150M

Audio Output:Mono



Specification: Transmitter

Case specification:standard 1U

Case material:metal panel

Oscillation mode:PLL synthesized

Frequency stability:±0.005%

Frequency range:550-580MHz

Frequency interval:32MHz

Preset Channel:40 channels separately set 4 groups

Operate mode:manual adjust

Max Deviation:±48KHz

Frequency response:50Hz~15KHz±3dB

Transmit output power:100mW(50Ω)

Harmonic radiation:＜4NW

AF input:XLR,φ6.35mm jack

Earphone load impedance:≥16Ω

Current consumption:DC 12V/250mA

Antenna socket:TNC socket(50Ω)



Receiver:

Oscillation mode:PLL Synthesized

Frenquency range:550-580MHz

Preset channel:40 channels separately set 4 groups

Operate mode:manual adjust

Receiving mode:single tuning

Sensitivity:deviation 25 khz,with conecting 7dBuV,S/N＞78dB

Max Deviation:±48KHz

Comprehensive T.H.D:＞94db(1KHZ-A)

Comprehensive Reaponse::50Hz~15KHz±3dB

Output power:(32Ω)2x35mw@1KHz

Earphone load impedance:≥16Ω Out socket:φ3.5mm stereo earphone socket Volume output adjusts:adjust when using Power box :batteries AAX2 Current drain:3V/120mA(Under the mediant degrees of the volume control)



Package Include(Whole system):

Transmitter × 1

Bodypack receiver(with earphone) × 2/4

Antenna × 2

Cable Line × 4

Power Adapter × 1

User Manual × 1

• UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Improved comprehensive performance, anti-frequency drop, anti-series frequency. Frequency range: 550 MHz-580 Mhz. In the 32MHz frequency band, the preset 40 frequencies can be switched at will. The dynamic expansion circuit greatly improves the signal-to-noise ratio
• USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect
• DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable
• WIRELESS RANG AND FREQUENCY RANG-IEM1200 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet,THE normal can be 250FT-350F.Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again
• QUALITY AND TECHNOLOGY GUARANTEED-Using advanced circuit design,clear the receiving blind angle to make the system's receiving signal steady.The system is strong, because of the housing is made by tough metal material.It is the best choice of stage performance monitor product.We also have 30 days no reason return and 3 years warranty

User questions & answers

Question:	What kind of road case or antenna system would you use for these abs if you had 5 diffrent frequency in the road case
Answer:	Dear customer, One transmitter can be used for 9 receivers, you can purchase this U4R4 kit and then go to https://amzn.to/395bCge ，order 5 xvive receivers. or othe 2 pack this U4R4 kit,and go to https://amzn.to/395bCge In addition order 1 receiver, and spare one transmitter. thank you.
Question:	Can I use any type of headphones for the body pack
Answer:	This is a single channel in-ear system. If you are interested in a dual system, you would need a PSM1000.
Question:	Is there a way to front mount the antennas
Answer:	you NEVER want to use Bluetooth headphones for recording or monitoring live because they will introduce an intolerable amount of latency (as of BT v4)
Question:	I have some Shure in ear headphones, will it work with the body pack
Answer:	As many as you want. The transmitter puts out a signal like a radio station does. The receivers are the radios that pick it up. With this unit in mix mode you can also create 2 totally different mixes.

• 【Great 2.4GHz Band】2.4GHz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency.Mono balanced XLR or mono unbalanced TS input.Provides smooth frequency response with any headphones.
• 【Less than 4.5ms Latency】Simultaneous broadcasts on 6 channels no-interference, Less than 4.5ms Latency(normal),Up to 107 dB signal-to-noise ratio provides clear, detailed audio at any volume. High Resolution 24-bit/48kbps audio. Broad 20Hz-20KHz frequency response，Dynamic Rang 107 dB.
• 【Efficient Power Circuit and  Listening Effect】 Rechargeable Lithium Battery，7 hours of battery life(normal),comes with power cable,ensures great performance for your every show.Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch monitoring has the headphone jack.it can replace traditional complex sound monitoring equipment,achieve admirable listening effect.
• 【Workmanship and Technology】-Using advanced circuit design,great chips,clear the receiving blind angle to make the system's receiving signal steady. the housing is made by tough metal material.It is the best choice of monitor product.Take it out of your case or pocket, plug it in, turn on the power,  Long press the CHANNEL BUTTON key to match transmitter and receiver at the same time, and play. That's how simple it is.
• 【Buy with Confidence】30 days money back one year warranty, any question clicks in "YOUR ORDER" options click the “contact seller"

User questions & answers

Question:	Where can you get replacement lithium batteries when these fail to charge properly? Also what is the expected battery life
Answer:	No they aren't, but they can handle heavy bass if it's in your mix. They give you all the qualities of the EQ if that makes sense. You get your hi, mid, and low frequencies.
Question:	How loud is this iem at the headphones ? i have a hearing loss so the louder the better, also can you use the xvive 2 guitars and xviv4 iem together
Answer:	Although I’m a guitar player, and have only used them as such, I believe these IEMs would be useful for any musician. The silicone and foam pieces give very good isolation, and there’s good separation in the mix.
Question:	Will the xlr transmitter have enough room for other wired xlr's around it when plugging into x
Answer:	Hello there! Thanks for your interest in our Bmaster in-ear monitor headphones! Bmaster series provide several color options, including black, green, white, blue, olive. So the earphone's specification of them is all the same. And we gonna launch another four new colors in this listing (red, black, yellow, shiny yellow) for more color requirements.
Question:	Do you have 5G veraion
Answer:	The basn bmaster in-ear earphones are ergonomically designed to fit the auricle comfortably and can be worn for a long time. the package comes with 3 different types of replaceable eartips (all with S/M/L). Choosing the most suitable eartips for you will make it more comfortable to wear and also bring better sound isolation! Thanks for your interest in the basn bamster triple driver in ear monitor headphones! Btw, all customers are a replacement or refund due to the defectiveness of our products!

Product description

New SE215 wireless sound isolating earphones provide Clear sound and deep bass with the freedom of upgraded Bluetooth 5 connectivity. Breakthrough sound isolating design keeps earphones in and noise out during exercise or travel, providing up to 10 hours of immersive audio on a single charge. The inline Microphone and three-button remote ensures clarity for calls and voice prompts, and provides volume and playback control. Available in multiple colors, The SE215 features a dedicated, premium headphone amp for improved high-fidelity audio over prior models and support for the latest codecs. Includes a USB charging cable, clothing clip, zippered carrying case and fit kit with selection of sleeves.

• Clear sound with deep bass elevates your audio performance in a CONVENIENT and portable package
• Sound Isolating design featuring fit kit with a variety of sleeves for custom fit blocks up to 37 dB of Outside noise for immersive listening no matter where you are
• Bluetooth 5. 0 pairs with most phones, laptops and tablets, with up to 10 hours of battery life and 30 feet (10 meters) of range
• Multi-point pairing enables pairing of up to two devices transition from the office to on-the-go between multiple sources and media
• Inline three-button remote and microphone offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback
• Secure, over-the-ear, wire form design ensures earphones rest in place for unmatched, long-wearing comfort and personalization
• Includes SE215s, Bluetooth 5. 0 communication cable, charging cable, clothing clip, zippered carrying case and Fit Kit with selection of sleeves.

User questions & answers

Question:	Anyone use these for in-ear monitor (IEM) and any lags
Answer:	yes , it's fit 0-6 months baby .
Question:	Does these have a microphone to use like a headset for phone calls
Answer:	faux fur throw blanket
Question:	Can you use any Bluetooth 5.0 transmitter or just Shure's one
Answer:	Yes, it's soft and silky. It doesn't seem to pill and so far I'm pleased. I bought another!
Question:	Can you charge and listen or does it shut off when charging
Answer:	No.

Product features

SE215 Wireless Sound Isolating Earphones

New SE215 Wireless Sound Isolating Earphones provide clear sound and deep bass with the freedom of upgraded Bluetooth 5 connectivity. Providing up to 10 hours of immersive audio on a single charge, the SE215 features a dedicated, premium headphone amp for improved high-fidelity audio over prior models. Includes a USB charging cable, clothing clip, zippered carrying case and fit kit with selection of sleeves.

New Wireless Earphone features (with BT2) vs. Wireless models (with BT1) include:

One Hi Def Driver

Single dynamic driver in each ear produces clear sound with deep bass in a convenient and portable package. Special Edition (SPE) white and blue versions have distinctly tuned frequency response for extended bass. Sensitivity: 107 dB SPL/mW. Frequency Range: 22 Hz –17.5 kHz / 21 Hz – 17 kHz (SPE). Speaker Type: Single Dynamic. Impedance: 17 Ω. Additional specifications are available in the user guide.

Sound Isolation

Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound. Comes with Soft Flex Sleeves (S,M,L) and Foam Sleeves (S,M,L).

Detachable Cable

Innovative detachable cable system ensures multiple connectivity options for long-term device compatibility, upgrades and flexibility. Pair with any Bluetooth device, or plug directly in with options for Android and iOS. Flexibility never sounded so impressive.

Features & Benefits

• Bluetooth 5 Wireless Technology pairs with most phones, laptops and tablets, with up to 10 hours of battery life and 30 feet (10 meters) of range.
• Premium, wireless audio performance with clear sound and deep bass. A dedicated, premium headphone amplifier provides superior, high-fidelity audio quality with wireless capability.
• Support for multiple codecs. Qualcomm aptX audio, aptX HD, aptX Low Latency, AAC, and SBC enable superior digital audio.
• Sound Isolating design featuring fit kit with a variety of sleeves for custom fit blocks up to 37 dB of outside noise for immersive listening no matter where you are.
• Inline remote and microphone offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback.
• Color options: clear or translucent black for stage-inspired looks, Special Edition white or translucent blue for a stylish finish.
• Secure, over-the-ear design ensures earphones stay in place for unmatched, long-wearing comfort.

• WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.
• USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.
• DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable
• WIRELESS RANG AND FREQUENCY RANG-RW2080 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet,THE normal can be 250FT-350F,and the frequency rang is 902MHz-928Mhz.Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again
• QUALITY AND TECHNOLOGY GUARANTEED-Using advanced circuit design,clear the receiving blind angle to make the system's receiving signal steady.The system is strong, because of the housing is made by tough metal material.It is the best choice of stage performance monitor product.We also have 30 days no reason return and 3 years warranty.

User questions & answers

Question:	Can you send a replacement door hinge pin? I received the RW2080 two days ago and one of four radios is missing door hinge pin
Answer:	HI Dakao, the Yamaha DBR10s are made in Indonesia. We sale a lot of these. These are very nice boxes for the price and have been proven to be very reliable. Hope this helps.
Question:	Can i buy extra rw2080 body pack receivers in (902 - 928 mhz
Answer:	What device are you using? Laptop, ipad, phone? Your device or mixer could be the issue also. If your using a laptop try a different cable like USB from your laptop to your mixer. I believe your mixer has a USB channel. If ur device is not equipped with a sub then try checking the music playing device with a simple set of head phones to see if both headphone speakers are working and the sound is clear. If the sound is good then you may have an issue with your speaker. If you experience the same issue with one headphone speaker clearer than the other then the problem may be your aux to RCA cable or your mixer. You can also try plugging your Aux to RCA cable directly into your speaker. You have one red and one white RCA connector on the cable. Try plugging in just the white on the faulty speaker. See how that sounds. Then try plugging just the red RCA directly to your speaker . See what happens. If everything is good then it's something with the mixer whether it's the knob adjustments or it could be the xlr cable. If you do still have a problem then it could be the headphone jack on your device or again your aux to RCA cable. Try everything on at a time this way you can rule stuff out.
Question:	Can another reciever be added
Answer:	Let me just say first....I have the DBR 15" speakers. These speakers do throw far! I did a gig with 150 people and had a lot of room left. I could have easily done 200+ with these 2 15"s. If you're using a sub with the 2 10"s ......you should definitely be able to rock a 200 crowd. Also, Yamaha makes a really nice 12" active sub. Don't want to sound like I'm trying to sell something, I was just really impressed! I listened to it at Guitar center. It blew away QSC, Ev and Mackie all were 15" models. Also, the SPL on the 10" model is rated at 129 which is just 3 db lower than the 15" which is rated at 132.
Question:	This will work in Colombia
Answer:	Don’t know yet

Product features

RW2080 WIRELESS IN EAR MONITOR SYSTEM

1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.

2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.

3.Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.

4.With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the best choice of stage performance monitor product

RW2080 BODYPACK RECEIVER

Receiver: Oscillation

mode:PLL Synthesized.

Frenquency range:902-928MHz.

Preset channel:40 channels separately set 4 groups.

Operate mode:manual adjust.

Receiving mode:single tuning.

Sensitivity:deviation 25 khz,with conecting 7dBuV,S/N＞78dB.

Max Deviation:±48KHz.

RW2080 Usage illustration instruction

XTUGA -RW2080 IEM WHOLE METAL UHF WIRELESS In Ear Monitor SYSTEM. LCD display shows clear working status. Metal Bodypack Receive. Low battery remind of bodypack receivers. Power switch control. Strong signal, UHF frequency. Digital tone key locking technology to avoid possible interference. 40 preset channels separately by 4 groups, can be adjustable. Effective distance:250FT. Audio Output:Mono.902-928MHZ

BK510 wireless In ear monitor system Connectors: ¼” Stereo headphones monitor out, Combo ¼” - XLR female type in, ¼” TS unbalanced loop out jacks, 1/12” barrel-type DC input jack wheel Connectors: 3.5 mm mini jack for earbuds output Battery Life: 17-20 hours BNC antenna socket Controls: Power/Mute On/Off

Product description

The in-ear monitoring system market was holistically boosted by the growing demand for concerts and music recordings, increasing live music shows and activities. More concerts and music festivals are using new technology in place of traditional wired ones.

This system is based on 2.4GHz technology, a practical wireless solution to provide consist sound whenever you go on stage while enhancing sound performances and freedom of movement. High-quality audio and stable transmission make it perfect for professional studio and live stage performance!



Parameter:

Frequency Range: 2400~2483MHz

Frequency Response: 20~20KHz

Effective Range: 1000ft(out of sight)

Latency: 10ms

Sample Rate: 64@16bit*2

S/N Ration: 80dB

THD: 0.3%@1KHz

Dynamic Range: 90dB

Channel Separation: 70dB

Size: 4.7*3*0.5inch



Packing List:

Bodypack

Charge Cable

AUX Audio Cable

3.5-RCA Audio Cable

3.5mm to 6.35mm audio connector

Back Clip

antenna

Gift-Box

• 1. 2.4GHz band: an ISM frequency band which is legal and free all over the world, designed to transmit high quality digital audio at 2Mbps super speed wirelessly. It is optimal for wireless IEM system
• 2. Freedom of Movement: 1000ft transmission range(with clear line-of-signt), this wireless stage monitor system allows for uncluttered stage sets and a reliably consistent sound wherever you move, perfect for stage performance and gigs.
• 3. Tranmitter & Receiver dual mode: Compact lightweight 2-in-1 bodypack adapter, each unit can act as a receiver or a transmitter with a flip of a switch.
• 4. Mini size, battery powered and tripod stands, easy to move and put wherever you like, even outdoor.
• 5. Both transmitter & receiver support Mic+3.5mm input and 3.5mm output simultaneously. Performers can create their own custom mixes by adjusting the stereo blend and overall volume level, resulting in lower volume on stage and enhanced audio detail, and meet different monitoring requirements.

User questions & answers

Question:	Does the transmitter work for both receivers
Answer:	Yes sure you can this is the link https://www.amazon.com/dp/B081N9V8VL?ref=myi_title_dp
Question:	Can you plug in to the transmitter output of personal monitor mixer
Answer:	Yes. Just like a radio station thousands/millions of receivers can tune in to the same channel at one time. They each will receive the same broadcast.
Question:	Can this be mounted with a universal soundbar mount
Answer:	Yes,it works
Question:	What is the transmission distance
Answer:	you won't lose watts per se but a proper line level signal from a mixer will be stronger and cleaner. will very likely make the speakers louder than running your ipod direct...what you are losing is spl. plus with the eq on a mixer you can properly adjust the tone, as needed, for the environment.

• 【Great 2.4GHz Band】2.4GHz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency.Mono balanced XLR or mono unbalanced TS input.Provides smooth frequency response with any headphones.
• 【Less than 4.5ms Latency】Simultaneous broadcasts on 6 channels no-interference, Less than 4.5ms Latency(normal),Up to 107 dB signal-to-noise ratio provides clear, detailed audio at any volume. High Resolution 24-bit/48kbps audio. Broad 20Hz-20KHz frequency response，Dynamic Rang 107 dB.
• 【Efficient Power Circuit and  Listening Effect】 Rechargeable Lithium Battery，7 hours of battery life(normal),comes with power cable,ensures great performance for your every show.Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch monitoring has the headphone jack.it can replace traditional complex sound monitoring equipment,achieve admirable listening effect.
• 【Workmanship and Technology】-Using advanced circuit design,great chips,clear the receiving blind angle to make the system's receiving signal steady. the housing is made by tough metal material.It is the best choice of monitor product.Take it out of your case or pocket, plug it in, turn on the power,  Long press the CHANNEL BUTTON key to match transmitter and receiver at the same time, and play. That's how simple it is.
• 【Buy with Confidence】Xvive offer to provide quality services and products.30 days money back one year warranty, any question clicks in "YOUR ORDER" options click the “contact seller"

User questions & answers

Question:	Can the u4 be pluged directly to the guitar
Answer:	Need to order 220v from shure
Question:	What is the maximum number of receivers that can be connected? We have a band of 9 musicians
Answer:	No, it only has two channels, if you want to use 4 channels, you need to buy two transmitters

Product features

Xvive U4 Wireless in-Ear Monitor System

• Audio Frequency Response: 20Hz – 20KHz (-3dB)
• Working Range: 120 ft.Actual range depends on RF signal absorption,reflection and interference.
• Sampling Rate: High Resolution 24-bit/48kbps audio
• Dynamic Range: 107dB
• Signal-To-Noise Ratio:Up to 107 dB signal-to-noise ratio provides clear,detailed audio at any volume.
• Battery Life: 7 hours

You get what you pay for

Use one transmitter to send signal to Multiple Receivers- creates monitoring for the entire band. Send the signal from one transmitter to as many receivers as needed simultaneously,Simply set as many receivers as needed to the same channel as the transmitter. OR - In situations where multiple “mixes” are needed on stage,each unit has 6 select-able channels for creating up to 6 individual discrete mixes. If you use more than one transmitter,The receiver can switch between different sound sources by simply changing the channel selector.

• WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.
• USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.
• DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable
• WIRELESS RANG AND FREQUENCY RANG-BK510 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet,THE normal can be 250FT-350F,and the frequency rang is 572MHz-599Mhz.Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again
• QUALITY AND TECHNOLOGY GUARANTEED-Using advanced circuit design,clear the receiving blind angle to make the system's receiving signal steady.The system is strong, because of the housing is made by tough metal material.It is the best choice of stage performance monitor product.We also have 30 days no reason return and 3 years warranty.

User questions & answers

Question:	Is it 1/4" or XLR inputs
Answer:	Yes, there's delay even with an AptX-LL transmitter. Not suitable for monitoring instruments.
Question:	Will this system support multiple receivers
Answer:	It does have a mic. My box says "Inline mic & remote", so the mic must be on the remote that I use to turn volume up/down and to pause/play. The remote is on the right side cable. I don't use these during calls, so I have not used the mic... But the box says it does!
Question:	Does this have a rack mount attachment
Answer:	ANy
Question:	Can you ship this item to Panama
Answer:	yes, you can charge and listen at the same time - simply plug charging cable and then turn on

Product features

BK510 WIRELESS IN EAR MONITOR SYSTEM

1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.

2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.

3.Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.

4.With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the best choice of stage performance monitor product

BK510 BODYPACK RECEIVER

Receiver: Oscillation mode:PLL Synthesized. Frenquency range:572-599MHz. Preset channel:40 channels separately set 4 groups. Operate mode:manual adjust. Receiving mode:single tuning. Sensitivity:deviation 25 khz,with conecting 7dBuV,S/N＞78dB. Max Deviation:±48KHz.

BK510 Usage illustration instruction

XTUGA -BK510 IEM WHOLE METAL UHF WIRELESS In Ear Monitor SYSTEM. LCD display shows clear working status. Metal Bodypack Receive. Low battery remind of bodypack receivers. Power switch control. Strong signal, UHF frequency. Digital tone key locking technology to avoid possible interference. 40 preset channels separately by 4 groups, can be adjustable. Effective distance:250FT. Audio Output:Mono.572-599MHZ

BK510 wireless In ear monitor system Connectors: ¼” Stereo headphones monitor out, Combo ¼” - XLR female type in, ¼” TS unbalanced loop out jacks, 1/12” barrel-type DC input jack wheel Connectors: 3.5 mm mini jack for earbuds output Battery Life: 17-20 hours BNC antenna socket Controls: Power/Mute On/Off

Product description

ANLEON S2 is an IEM system designed for stage performance and broadcasting. High S/N ratio and dynamic range ensures optimal audio quality. The dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the S2.

Stereo/Mono switch: Stereo mode (the device outputs the signal fed into the left input to the left headphone and the right signal to the right headphone). Mono mode (Channel L and channel R are mixed and output to both headphones.)

Specifications

RF frequency Range: 561-568MHz

Channel: 6

Headphone output: 3.5mm jack socket

Transmitter Power Supply: DC9V/300mA

Receiver operating time: up to 12 hours, 2 x 1.5V AA (not included)

Operating Range: 80m(environment dependent)

RF Output Power: <10mW

Signal-to-noise ratio(1mv,peak deviation) typ.70 db(A)

Frequency Response: 20Hz~18KHz

Product Content

S2T Transmitter 1 pc

S2R Receiver 1 pc

Earphone 1 pc

DC 9V/300mA power adapter 1 pc

• 6 selectable UHF channels
• Dynamic expansion circuitry for high S/N ratio
• Use any number of Receivers on the same frequency

User questions & answers

Question:	How can I purchase more receivers
Answer:	I tried to search the same topic.. i didnt find tej stand alone transmiter
Question:	what is the battery size the pack uses and how long does the pack last on a set of batteries? Some outdoor events we are playing for 4+hours
Answer:	Takes 2 AA batteries. Based on my own usage I'd estimate about 8 hours per set of batteries.
Question:	What type/size connectors do the left and right audio input jacks on the transmitter take
Answer:	TRS or TR 1/4”.. (the ones i use) i think XLR too.. dont remember so well. Im traveling so cant check it right now
Question:	Is it normal when playing music through this, I can barely hear the vocal but only background music
Answer:	Depends on the Mix Turn the music down and vocals up and you'll be fine.

Product description

Mpow Earbuds

• Hybrid Active Noise Cancellation: The outward-facing microphones can detect the external noise, and the inward-facing microphones monitor the noise inside the ear canal, and the wireless earbuds counter it with equal anti-noise at the same time to eliminate the inside and outside noise. This technology can achieve 28db noise cancellation, allowing you to enjoy music in a more immersive way.
• Transparency Mode: You can hear the sound of the surrounded environment without taking off the wireless ANC earbuds, allowing you to interact with the world at any time. You can talk with people anytime and anywhere, and you can hear the sounds of ambient traffic to ensure your personal safety.
• Low-latency mode: The latest Bluetooth 5.1 technology is adopted to enhance the accuracy of device connection and the stability of signal transmission. And it has a low-latency mode. You can use this mode when you are watching movies or playing games to improve synchronization.
• In-ear Wearing Detection: The Hybrid ANC Earphones can automatically detect whether the earphone is inside the human ear. If it is, the earbuds will automatically play. When you take off the earphone, it will automatically pause, which can help you reduce power consumption. Beside, this headset also has mono/twin Mode, You can choose any headset to use as your like.
• Quick Wireless Charging: You can use the USB Type-C cable to get quick wired charging, and besides that you can also simply lay the case on a wireless charger (sold separately) for convenient wireless charging. Interestingly, you can also place the case on a smartphone with reverse wireless charging function.
• Opened&Connected: The wireless earbuds allows you to achieve true unlimited freedom, just open the charging case and they'll automatically connect to your paired device. With just finger touch, you can control music/volume/ calls/voice assistant/any mode.

Product features

Note: Wireless charger sold separately.

How Does Hybrid ANC (Active Noise Cancelling) Technology Work?

An outward-facing microphone detects external noise and Mpow X6 counters it with equal anti-noise.

An inward-facing microphone picks up the internal noise and Mpow X6 delivers anti-noise again to counter it.

Mpow X6 earbuds double the noise cancelling effect compared to other ANC earbuds as Mpow X6 has 2 microphones on each earbud to cancel the outside and inside noise.

Mpow X6 hybrid active noise cancelling wireless earbuds can cancels 90% noises and its maximum noise cancelling level can be up to 28dB.

Naturally Interact with the World

PassThrough mode, also known as transparency mode or monitoring mode, allows you to hear what's going on around you without taking off the earbuds. For instance, when you are listening to music with transparency mode on, suddenly your colleague speaks to you, you can hear what he or she is saying without taking off the earbuds. And when you are walking or riding with earbuds on ears, it is also necessary to hear the outside sound for your safety.

Easy Touch Control

• Volume +/- : Tap
• Play/Pause : Double-tap
• Skip Tracks : Next: triple-tap the R(right) earbud
• Previous: triple tap the L(right) earbud
• Answer/End Phone Call : Double-tap
• Reject a Phone Call : Hold on for 2 seconds
• Activate Voice Assistants : Hold on the R(right) earbud for 2 seconds
• Activate Low-latency mode : Tap the L(left) earbuds for 4 times
• Switch Modes Among ANC on, ANC off, Transparency : Hold on the L(left) earbud for 2 seconds

Check the Case’s Battery Level

How to Know the Earbuds are Charging in the Case?

Check the Earbuds’ Battery Level

Sweatproof & Waterproof

Open & Connect Automatically

What You Get

Product description

"Over twenty years ago, Westone changed the way music is performed with the introduction of the world’s first universal-fit balanced-armature in-ear musicians’ monitors.



Originally designed and built for performing musicians, the UM Pro 10 features a proprietary, single balanced-armature driver, that reproduces a dynamic soundstage, with all the detail and clarity that musicians have come to expect from a professional in-ear monitor. The UM Pro 10 will perform in the most demanding environments, and meet the needs of the most discerning musician or music lover. The Westone UM Pro 10 incorporates all the innovations and expertise that Westone has developed in almost 60 years of designing and manufacturing products for the human ear. The compact, low-profile, ergonomic design is comfortable, and can be worn for hours and hours. . Westone’s proprietary silicone and comfort foam eartips are provided in 5 different sizes and enhance the performance of our In-Ear Musicians’ Monitors by ensuring a superb fit and by provide superior noise isolation. Ambient sound levels are reduced an average of 25 dB, which makes UM Pro 10 ideal for use onstage or in other noisy environments.



The Westone UM Pro 10 was designed by musicians, for musicians, and can be used not only by onstage, but also by music lovers, no matter what type of music they listen to. "

• WESTONE SOUND FOR THE ASPIRING MUSICIAN: The UM Pro 10 features a proprietary, single balanced-armature driver, that reproduces a dynamic soundstage with all the detail and clarity that musicians have come to expect from a professional in-ear monitor. Designed and built for professional musicians the UM Pro 10 will perform in the most demanding environments and meet the needs of the most discerning musician or music lover. Connectivity Technology: Wired
• THE MOST COMPACT, LOW PROFILE, ERGONOMIOC DESIGN IN THE WORLD: THE MOST COMPACT, LOW PROFILE, ERGONOMIC DESIGN IN THE WORLD: Designed and built to perform in the most demanding environments, the UM Pro 10 is incredibly comfortable, and can be worn for hours and hours. Our silicone and comfort foam eartips enhance the performance of our In-Ear Monitors by providing superior noise isolation and ensuring a superb fit
• TWISTED MMCX AUDIO CABLE: Westone’s professional-quality MMCX Audio Twisted Cable is manufactured using high-strength, high-flex, ultra-low resistance tensile wire, which is reinforced with a special aramid fiber. Twisted to help reduce cable noise and keep the cable light-weight, flexible, and comfortable, our cable features MMCX Audio Connectors and 3.5mm stereo plug. Built to withstand the rigors of the road, Westone’s MMCX Audio Cable is perfect for use on-stage, or for personal listening
• TECHNICAL SPECS: The Westone UM Pro 10 features a full-range, single balanced-armature driver with 114 dB @ 1mW sensitivity, 20Hz - 16kHz frequency response, and an impedance of 19 ohms @ 1kHz
• IN THE BOX: Purchase includes; 1 pair Westone UM Pro 10 In-Ear Monitors, MMCX Audio Twisted Cable, 5 pair Patented STAR Silicone Eartips, 5 pair TRUE-FIT Comfort Foam Eartips, Impact-Resistant Monitor Vault, and Cleaning Tool.

User questions & answers

Question:	cord length
Answer:	it compatible with 1/4 and XLR inputs
Question:	Where are these manufactured
Answer:	Yes,my friend it can
Question:	I have the westone um-2s. are these comparable, and can i use the same custom ear molds i had made for those with these
Answer:	No it didn't come with one
Question:	Some buyers had issues with the westone um pro 10 audio not working with normal use. what can i do to prevent this from happening
Answer:	Yes sure.i can

Product description

SE215 special edition sound isolating earphones clear sound and extended bass in a secure, over-the-ear design with detachable cable and choice of sleeves for long-lasting comfort and custom fit. Breakthrough sound isolating design keeps earphones in and noise out during exercise or travel, providing incredibly immersive audio. An inline remote and mic provides seamless control of calls and music and includes a feature to transition between Apple and Android devices with a 3. 5 mm connection - in one switch. Available in Blue and white, The SE215 includes a zippered carrying case and fit kit with selection of sleeves.

• Clear sound with deep bass elevates your audio performance in a CONVENIENT and portable package
• Sound Isolating design featuring fit kit with a variety of sleeves for custom fit blocks up to 37 dB of Outside noise for immersive listening no matter where you are
• Easily transition between Apple/iOS and Android devices with 3. 5 mm connection in one switch
• Inline three-button remote and microphone offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback
• Secure, over-the-ear, wire form design ensures earphones rest in place for unmatched, long-wearing comfort and personalization.
• Includes SE215s, universal 3. 5 mm communication cable, zippered carrying case and Fit Kit with selection of sleeves.
• Fit kit Includes multiple options. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear

User questions & answers

Question:	Hi, do the inline controls allow you to skip to the next or previous track
Answer:	Yes. You can skip FWD and Back.
Question:	Anyone know if the mic will work on a PS
Answer:	It should. Assuming your PS4 is bluetooth enabled. But I would recommend a headset with a mic if you are a gamer.
Question:	what's that little pointy tool that comes in the box? Thanks
Answer:	It’s a cleaning tool for when they get dirty
Question:	What's the difference between the regular item and the one with the universal cord? What is a universal cord
Answer:	Depending on the model, you get the two earpieces and either a cord that connects them with a 1/8” jack—or you get a cable that connects the two ear buds with a Bluetooth pack on it. Either way, I have bought many pairs of these headphones. They are great value for the quality.

Product features

SE215 Sound Isolating Earphones

SE215 Earphones provide clear sound and extended bass in a secure, over-the-ear design with detachable cable and choice of sleeves for long-lasting comfort and custom fit. Breakthrough Sound Isolating design keeps earphones in and noise out during exercise or travel, providing incredibly immersive audio. An inline remote and mic provides seamless control of calls and music and includes a feature to transition between Apple and Android devices with a 3.5 mm connection - in one switch.

One Hi Def Driver

Single dynamic driver in each ear produces clear sound with deep bass in a convenient and portable package. Special Edition (SPE) white and blue versions have distinctly tuned frequency response for extended bass. Sensitivity: 107 dB SPL/mW. Frequency Range: 22 Hz –17.5 kHz / 21 Hz – 17 kHz (SPE). Speaker Type: Single Dynamic. Impedance: 17 Ω. Additional specifications are available in the user guide.

Sound Isolation

Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound. Comes with Soft Flex Sleeves (S,M,L) and Foam Sleeves (S,M,L).

Detachable Cable

Innovative detachable cable system ensures multiple connectivity options for long-term device compatibility, upgrades and flexibility. Convert Shure SE215 earphones to wireless with the Bluetooth 5 communication cable RMCE-BT2 or RMCE-TW1 (sold separately), or plug directly in with options for Android and iOS. Flexibility never sounded so impressive.

Features & Benefits

• Sound Isolating design featuring fit kit with a variety of sleeves for custom fit blocks up to 37 dB of outside noise for immersive listening no matter where you are.
• Easily transition between Apple/iOS and Android devices with 3.5 mm connection in one switch.
• Inline remote and microphone offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback.
• Secure, over-the-ear design ensures earphones stay in place for unmatched, long-wearing comfort.
• Zippered carrying case and fit kit with selection of sleeves included for personalized fit and comfort.

Product description

The AWR6305U5 is a Wireless Receiver for the Audio2000'S tm AWM6304U, AWM6305U and AWM6306U Professional UHF Wireless In-Ear Monitoring System (with 100 Adjustable Frequencies) Includes: 3. 5mm Stereo Earphone Jack 3. 5mm Line-Out Jack Built-in Audio Limiter

• ***500 MHz range***
• Audio output: line level x 2, XLR audio input: 1/4" phone jacks X2
• Headphone output: 1/4" stereo phone jack with adjustable volumeEar-buds included
• Pll Synthesized, FM stereo modulation

User questions & answers

Question:	I have had two of these die recently, less than 6 months old. Who do I call for warranty
Answer:	Good day, and thank you for your question. We can be reached at 877-736-6434, option 3. If you would like to call us while with the unit, we are glad to troubleshoot in real time. Hopefully this helps, and have a good afternoon.
Question:	Viene con su caja
Answer:	As long as the new transmitter is in the same frequency range A1
Question:	I have Shure system that uses that uses the 518-554 mhz range. Can this receiver be used for that system
Answer:	Yes you can, you set pack 1 all the way to the left and pack 2 all the way to the right.
Question:	does it come with a receiver
Answer:	I just compared the dimensions of this system with that of my Galaxy that I have. This Sennheiser unit is about double the depth of my unit (width and height are about the same). That being said, it should still fit as I have plenty of room to also keep my cables in the bag right behind the transmitter. I've been using this bag for just over a year and am just as happy with it as when I originally ordered it!

Product features

Audio2000'S AWR6305U5 In-Ear Audio Monitor Receiver

The AWR6305U5 is a Wireless Receiver for the Audio2000'S AWM6304U, AWM6305U and AWM6306U Professional UHF Wireless In-Ear Monitoring Systems (with 100 Adjustable Frequencies)

• Audio output: line level x 2, XLR audio input: 1/4" phone jacks X2.
• Headphone output: 1/4" stereo phone jack with adjustable volume.
• Built-In Audio Limiter.
• PLL Synthesized, FM stereo modulation.

• WIRELESS PERFORMANCE: This UHF stereo wireless in ear monitor system operates in 900MHz band (905MHz – 925MHz), free of interference by utilizing UHF wide audio signal transmission (Up to 89 systems can operate simultaneously). Wireless system enables users to move freely on the stage and in the studio with operating distance from 140 – 160 ft. in open space, line of sight. *For longer distance, please avoid thick walls, glass, and metal block
• HIGH-END QUALITY AND DESIGN: Elegant sleek design, metal construction for transmitter base unit, black carrying case for safe-keeping. LCD panel provides system details including channel, group number, stereo mode selection, lock feature, and RF indicator. Simple setup with uninterrupted frequency to optimize sound performance for this personal monitor system. Good quality earbuds provide purer sound and enhanced performance for studio and stage monitor
• STEREO FUNCTION FOR PROFESSIONAL USE: This quality stereo IEM system can works perfectly in various sound-monitoring events, both small and large venues, ideal for on stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes metal racks that facilitate more professional use. Users can select stereo mode for both the transmitter and receiver to enjoy stereo performance of the system
• BOX CONTENTS: 1 x UHF wireless transmitter, 3 x bodypack receiver, 3 x in-ear earbuds, 1 x power adapter, 6 x AA batteries, 1 x antenna, 1 x extension cord, 2 x metal racks, 1 x user manual
• DEVOTED SERVICE: Genuine Phenyx Pro audio products come with 12-month manufacturer assurance and supportive customer service. Welcome to come to us for troubleshooting or replacement of discontinuous/defective parts. Please contact us at service @ phenyxusa.com or support @ phenyxpro.com

User questions & answers

Question:	What is the frequency range of the iem system? how many iem base unit can i use at the same time? i am looking to use 8 transmitters and 16 bodypack r
Answer:	Hi thanks for asking! The PTM-10 system frequency range is in 905MHz – 925MHz band. You can connect any number of bodypack receivers to the basic transmitter unit. But the number of PTM-10 systems used is related to your environment and interference. If you need to use 8 PTM-10 systems, we recommend that you order 4 500MHz versions for use：https://phenyxpro.com/collections/in-ear-monitor-system
Question:	If I use ear-buds with a built-in mic, on each transmitter, can everyone with in-ear monitors hear what is said
Answer:	Hi thanks for asking! The bodypack is unable to transfer the audio to the receiver so other bodypack monitors won't be able to hear it. The only input of this monitor system is the two XLR input jacks at the back of the receiver. Thank you.
Question:	what is the power rating of the power adapter
Answer:	Hi thanks for asking! The power rating of the power adapter is 110-240v. Let us know if you have futher questions. Thank you.
Question:	What are the dimensions of the transmitter? LxHxW
Answer:	13.39 x 15.16 x 1.97 inches

• WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.
• USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.
• DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable
• WIRELESS RANG AND FREQUENCY RANG-RW2080 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet,THE normal can be 250FT-350F,and the frequency rang is 572MHz-599Mhz.Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again
• QUALITY AND TECHNOLOGY GUARANTEED-Using advanced circuit design,clear the receiving blind angle to make the system's receiving signal steady.The system is strong, because of the housing is made by tough metal material.It is the best choice of stage performance monitor product.We also have 30 days no reason return and 3 years warranty.

User questions & answers

Question:	This is a pack of transmitter and receiver
Answer:	only a receiver
Question:	Can each “in-ear” have its own adjustments made? Such as if an artist wants more of their guitar and less vocals but another wants the opposite
Answer:	Only if you adjust this mix as it's fed into the transmitters. The transmitter can broadcast on 2 separate frequencies at the same time, as the actual transmitter rack has 2 transmitters built into it. You can pick which frequency you tune each individual pack to. Each transmitter has a R & L input. So, as long as you have a mixer that could feed the different preferred mixes into the transmitters, then the answer is "yes". If you were willing to use the receivers as mono devices (wear just one earphone instead of two), then you could conceivably have up to 4 different mixes available to broadcast to the receivers, by sending a different mix to each channel of each transmitter.
Question:	What size batteries do the receivers take
Answer:	2AA 1.5v batteries
Question:	Real Stereo System or dual mono mixed
Answer:	Wireless is dual mono. Wired (off the front port) is stereo.

Product features

RW2080 WIRELESS IN EAR MONITOR SYSTEM

1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.

2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.

3.Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.

4.With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the best choice of stage performance monitor product

RW2080 BODYPACK RECEIVER

Receiver: Oscillation mode:PLL Synthesized. Frenquency range:572-599MHz. Preset channel:40 channels separately set 4 groups. Operate mode:manual adjust. Receiving mode:single tuning. Sensitivity:deviation 25 khz,with conecting 7dBuV,S/N＞78dB. Max Deviation:±48KHz.

RW2080 Usage illustration instruction

XTUGA -RW2080 IEM WHOLE METAL UHF WIRELESS In Ear Monitor SYSTEM. LCD display shows clear working status. Metal Bodypack Receive. Low battery remind of bodypack receivers. Power switch control. Strong signal, UHF frequency. Digital tone key locking technology to avoid possible interference. 40 preset channels separately by 4 groups, can be adjustable. Effective distance:250FT. Audio Output:Mono.572-599MHZ

BK510 wireless In ear monitor system Connectors: ¼” Stereo headphones monitor out, Combo ¼” - XLR female type in, ¼” TS unbalanced loop out jacks, 1/12” barrel-type DC input jack wheel Connectors: 3.5 mm mini jack for earbuds output Battery Life: 17-20 hours BNC antenna socket Controls: Power/Mute On/Off