13 best behringer mp3 speakers

Product description

Ultra-compact 50-watt PA/monitor speaker with MP3 player and Bluetooth Audio Streaming.

• Multi-purpose, 50-watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc
• MP3 player included to play audio files via USB sticks
• Connect your iPod*, iPhone*, iPad* or any other audio-streaming device via Bluetooth
• Ultra-low noise 3-Channel mixer with 3-band EQ
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight

Product features

B105D

Ultra-Compact 50-Watt PA/Monitor Speaker with MP3 Player and Bluetooth Audio Streaming

• Multi-purpose, 50-Watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• 2 "Invisible" Mic Preamps,1 Mic preamp with phantom power for condenser microphones and 1 instrument-ready input (no DI required)

Muli-purpose Speaker with MP3 and Bluetooth

Behringer B105D is a fantastic multi-purpose, 50-Watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio use. Feel free to connect your iPod*, iPhone*, iPad* or any other audio-streaming device via Bluetooth for great sound.

Class-D amp and Super Light-Weight

Revolutionary Class-D amplifier technology provides enormous power, incredible sonic performance while also being super lightweight. With a 5" premium-quality and full-range driver, this product has ultra-low noise 3-channel mixer with 3-band EQ. 2 “Invisible” Mic Preamps comes with phantom power for condenser microphones and 1 instrument ready input.

Various inputs for keyboards and Mic use

Product contains a dedicated stereo input for keyboards, MP3, CD, and a Mic stand integration system for use with stand. In addition, it comes loaded with internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Overall, this speaker is super-tough and have impact-resistant enclosure with integrated top carry handle great for a wide range of uses.

Product description

Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.

• Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.
• High-performance MP3 player included to play audio files via USB stick
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-lightweight
• 6.5” premium-quality, full-range driver for excellent sound performance
• Ultra-low noise 4-channel mixer with 3-band EQ

User questions & answers

Question:	Has anyone tried using a USB mic with this
Answer:	Yes and no. We've used it for vocals in a band that did many different formats. More as a monitor than a amp though. It's loud, but it's not massively loud.
Question:	Has anyone used this for vocals in an R&B band and if so how did it perform
Answer:	Yes, standard power cord like a desktop computer or any other piece of sound equipment (3 prong grounded). You can play audio with a flash drive through the USB plug OR you can plug an mp3 player (or laptop, phone, etc) into the "CD INPUT" using a 3.5mm to stereo rca cable (http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=3.5mm+to+rca&rh=i%3Aaps%2Ck%3A3.5mm+to+rca)Hope that helps! It's a nice speaker (best of all it's super portable). You can also save a few bucks and buy the Behringer EUROLIVE B205D. It's the same 150 watts only in a 5.5inch speaker, no usb input (if you don't plan on using that!) and 2 XLR-1/4" inputs instead of 3.
Question:	Does this have a standard power cord that plugs into the wall? Can you hook an external mp3 player up to it easily? HOw is that done
Answer:	I checked both guitar center and amazon. make sure to check the warranty prices
Question:	How do I buy it
Answer:	Yes. You need the patch chords that should come with it. We transferred it easily to the TV.

Product description

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• High-performance MP3 player included to play audio files via USB stick
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs

User questions & answers

Question:	Is there a way to control remotely the mp3 player? i tried connecting an mp3 player to the usb port, but i can only play the songs from the PA
Answer:	shure you can, just nead a 3.5 to 1/4 mono cable male or 3.5 to 3.5 male and adaptor to 1/4 mono
Question:	can I plug my Ipad or laptop to play and what kind of wire do I need
Answer:	If you want to run a stereo setup, you're going to have to run from your source with two cables. Depending on what your source audio is, (mp3 player, mixing console, cd or, some other other player ),you will need to use audio cables that terminate with 1/4 inch mono plugs on the speaker side, and the source side must have the male plug ,or plugs, necessary to connect to the audio source player. Hope this helps.
Question:	What cable do I need to connect two of these speakers for stereo sound
Answer:	No
Question:	i live in europe, so does it support 230V
Answer:	Sorry, I have not used the USB mic.

Product description

Active 2-way 12" PA speaker System with MP3 player, wireless option and integrated mixer.

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• High-performance MP3 player included to play audio files via USB stick
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs (XLR and 1/4" TRS), Volume controls and Clip LEDs

Product description

Behringer MPA200BT all-in-one portable 200-watt speaker with wireless microphone, remote control via smart phone, Bluetooth audio streaming and battery operation

• All-in-one portable PA system with full Bluetooth* connectivity
• Incredibly simple to set-up and use - no technical background required. DSP presets for application type
• 200 Watts of powerful, high-quality sound for audiences of up to 500 people
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• High-Performance BEHRINGER ULM digital wireless microphone system included

User questions & answers

Question:	can you have the wireless mic and the blue tooth work at the same time
Answer:	I am not sure you can add an additional Behringer wireless mic.
Question:	Do I need a special adapter to add a second behringer microphone? Which microphone do I purchase for this
Answer:	I use the microphone that came with the unit, however you can use any headset microphone you wish, there are two inputs and a Bluetooth input for a total of 3. You would be subbing out the included wireless mic for your own headset. I have no real recommendations for a headset microphone as it is very dependent upon your price point. I have 3 different headsets, the Shure ($300) is the most reliable, but also the most expensive of what I own. I also own a Rockport UHF dual headset, which is the most bang for the buck ($74) and a Nady VHF headset ($49) which is dropout prone. Stay away from VHF is my biggest recommendation. This unit is phenomenal, you could perform anywhere in the world with it due to its extreme portability. A wireless headset WILL tether you to needing a power source.
Question:	Can I use a headset mic in place of handheld? If so, any recommendation on a wireless beltpack that's compatible
Answer:	Yes it can . Covered in manual . Pair one device to your Bluetooth source and it becomes the master . Link second speaker to first speaker within speakers Bluetooth interface (linking takes couple of minutes - wait ) . The second speaker becomes slave. Master process stereo left ; slave processes stereo right
Question:	Can this be paired with 2nd identical unit
Answer:	Not bluetooth, but does do wireless with Behringer's "wireless stick" and their mics. works great and handles two mics per speaker.

Product features

EUROPORT MPA200BT

All-in-One Portable 200-Watt Speaker with Wireless Microphone, Remote Control via Smart Phone, Bluetooth Audio Streaming and Battery Operation

Use the extremely portable, yet powerful EUROPORT MPA200BT PA system to stream songs from your Bluetooth-enabled smart phone at the next company picnic, or to get your message across on the playing field. With its 200-Watt amplifier and premium 2-way speaker system, the MPA200BT provides superb sound for up to 500 people – and the rechargeable battery lasts up to 20 hours. We’ve even included one of our high-performance ULM300USB digital wireless microphones for a supremely easy-to-use wireless, go-anywhere PA system right out of the box!

Bluetooth Ready

The days of tape decks and CD players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped device such as your smart phone, tablet, laptop, etc. Now, isn’t that easy?

Own the Stage with Digital Wireless

You are ready to go wireless right out of the box, thanks to the included ULTRALINK ULM300USB wireless microphone system. Wireless gives you maximum freedom and mobility without the need to run cables. The highest-quality sound is provided thanks to the ULM’s digital, license-free 2.4 GHz frequency spectrum. The ULM wireless system combines professional-quality sound with simple setup and an intuitive interface for legendary audio performance. Just plug in the ULM receiver 'dongle', and instantly you have an exceptional wireless mic system. Freeing you from cables is the simply easy way to own the stage.

Comprehensive Remote Control via Smart Devices

MPA200BT PA speakers can be controlled via dedicated apps for both Android and Apple iOS Bluetooth-enabled devices – and it's extremely easy. Just pair your MPA200BT with your smart device, and the control app automatically detects your setup and adapts for mono or stereo mode. Once successfully paired, you can adjust the speaker settings with a simple swipe of the screen or by pressing the settings icon. All MPA200BT speaker settings can be accessed from the control app.

Ultra-Portability

The great-sounding MPA200BT is truly portable (26.6 lbs/12.1 kg) thanks to its highly efficient Class-D amplifier, and the onboard battery pack keeps the party going for up to 20 hours – without a power outlet in sight!

Built-in Mixer

Loaded with features, the MPA200BT comes equipped with an onboard 4-channel mixer with connectivity for streaming audio directly from your Bluetooth-enabled device, the same ultra-low noise, high-headroom mic preamps that have made our mixers legendary – and an Aux input for that aforementioned CD player.

Sound Value

Whether you set your MPA200BT speakers on a table, or mount them on optional speaker stands, you’ll enjoy music streaming through this rich-sounding, easy-to-setup system in mere moments.

Product description

BEHRINGER PMP500MP3 Ultra-Compact 500-Watt 8-Channel Powered Mixer with MP3 Player, Reverb and Wireless Option

• Ultra-compact 500 Watt 8-channel powered mixer
• Enormous power, incredible sonic performance, and super-lightweight
• High-performance MP3 player included to play audio files via USB stick
• Studio-grade stereo reverb adds finishing touch to your sound
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)

User questions & answers

Question:	Can this be made to recieve bluetooth
Answer:	Probably yes but i did not test it for bluettoth use. You should try to use a bluetooth car stereo adapter: https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=bluetooth+car+stereo+adapter&rh=i%3Aaps%2Ck%3Abluetooth+car+stereo+adapter You will need also a mini plug to male stereo 1/4 inch adapter: https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=mini+plug+to+male+stereo+1%2F4+inch+adapter&rh=i%3Aaps%2Ck%3Amini+plug+to+male+stereo+1%2F4+inch+adapter
Question:	I can't find ohms anywhere. is this 500 watts @ 8 ohms? 4 ohms? 2 ohms
Answer:	The manual says 250 Watts per side Max with no reference to the resistance of the speakers. I'd guess 8 ohms, but I would check the manufacturer's website and ask them directly. It doesn't make sense that they wouldn't reference this in a user's manual. I run it into a single 8 ohm speaker for low volume rehearsal so power is never an issue.
Question:	What is the minimum load output (ohms) for this amp? Thanks - Terry Are the two output channels separate
Answer:	We had load issues with the first one of these we bought (not on Amazon). We blew the first one up twice. They rate this at 200 watts per channel, but I think this is built to play acoustic guitar and vocals in a small space. We are using their system that is rated at 1000 watts per channel which works great in clubs and larger venues.
Question:	Where can i find the stand for the behringer pmp500mp
Answer:	My pmp500mp3 came with a small adapter to use it with a "standard" stand.

Product description

Looking for a simple, affordable way to get your music into the digital realm? Or maybe you'd like to connect your computer to an external effects unit or recorder? Want to transfer your old cassette tapes to CD before the oxide falls off the tape? The fastest, easiest way to get analog audio into your computer is with the U-CONTROL UCA222 Audio Interface.

The fastest, easiest way to get analog audio into your computer. Click to enlarge.

S/PDIF optical output and headphone out with volume control.

Includes software such as XT Software's energyXT for recording right out of the box.

PC and Mac Ready

This ultra-compact, USB-powered device lets you connect your PC or Mac computer to virtually any piece of audio gear. It gets its power from your computer's USB bus, so no external power supply or batteries are required. And the UCA222 requires no special setup or drivers--just plug it in to a free USB port and start recording.

Versatility

The UCA222 features two analog mono inputs for connecting any line-level device, such as a mixer or tape deck, and two analog mono outputs for connecting active speakers or studio monitors. On the digital side, the UCA222 provides USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output has a dedicated level control and allows you listen to either the input source or the computer output.

Plenty of Options

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222's RCA outputs to the TAPE INPUT jacks of your mixer or active monitors, or directly into the input channels of the mixer. Connecting to mixer input channels gives you access to equalization and allows you to use the AUX Send features of your mixer to build extremely versatile monitor mixes for your recording sessions.

Tons of Free Software

Because you'll want to take full advantage of the UCA222's podcasting and recording potential we've included a massive software package including Audacity, Podifier, Juice, Podnova and Golden Ear. You're ready to go live on your Mac or PC computer right out of the box! You also get more than 100 virtual instruments and over 50 effects plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output.

When you're ready to take your recording projects to the next level, XT Software's energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode.

Great Value

For a fraction of the cost of other USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio gear.

What's in the Box

U-CONTROL UCA222 Audio Interface,  User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
• Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
• Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
• Works with your PC or Mac computer - no setup or drivers required
• Stereo Headphone output with dedicated Level control lets you monitor both input and output
• Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer
• Bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins

User questions & answers

Question:	Will this device be able to take a stereo signal, have it processed by a linux machine and then output the modified stereo signal to it's RCA outputs
Answer:	If the device is plugged into the linux machine via the USB cable, it will do this for you. With this hookup, it will produce a 2 way signal, even simultaneously, 1 going into the computer, 1 coming out from the computer. If need be, it’s even capable of looping an output signal back in, say to a recording app on your computer. Just make sure you flip the little black monitor switch to the off position to eliminate distortion, and the signal looping back in will be crystal clear and strong.
Question:	Do I need to buy a separate cable to use this product? I'm not really sure how the I/O system works. Can someone explain? Thanks
Answer:	Not sure of your intended use for this product.I bought the UCA222 because the earphone jack on my Dell laptop went bad. It worked really well for my needs, it has a USB plug that connects to the standard USB port on my laptop. Then I connect my earphones to a standard plug on the device. No other cable required for me.
Question:	Can you connect to a USB power supply and use the analog to S/PDIF output
Answer:	I don't know about the S/PDIF but I suspect it won't work very well. I tried using the analog in to headphone jack using a USB power supply and it sounded terrible. I thought it would be a way around having to use a computer and it didn't work. Once I plugged the UCA222 into a laptop instead of a power supply it sounded way better.
Question:	Can I connect 5 of these to get 10 independent audio output channels generated by the computer via usb
Answer:	There's nothing technically preventing you from connecting 5 of these to get 10 independent audio outputs. If your software supports it, your computer will just see them as 5 individual audio cards. The problem your likely to run into is your computer does have a limit on how many USB devices can function simultaneously (USB Bandwidth). One way around this problem is to use a Quad USB PCI Card, that has 4 USB port and each one in it's own controller. The next thing you will need to consider is how many PCI lanes you have (will determine how many USB controllers your PCI bus can support) Hope this helps.

Product features

U-CONTROL UCA222

The U-CONTROL UCA222 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds.

It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. We even give you all the software you’ll need to get started!

Tons of Free Software

To truly get the most out of your UCA222, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: - Record live audio -Convert tapes and records into digital recordings or CDs - Edit Ogg Vorbis, MP3, WAV or AIFF sound files - Cut, copy, splice or mix sounds together - Change the speed or pitch of a recording - And much more.

Imagine the Possibilities

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely-versatile monitor mix for recording sessions.

Compose. Record. Mix. Share

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an over-priced USB audio interface from those other guys, you can have state-of-the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Bridging the gap between your music and the rest of the world – the U-Control UCA222. Check one out at your local Behringer dealer, or place your order online today.

Product description

• High-definition bass and super-transparent highs
• Ultra-high dynamic range
• High-efficiency cobalt capsule
• Single-sided coiled cord with oxygen-free copper wires
• Round swiveling ear cups

User questions & answers

Question:	are these headphones wired or do they have a removeable wire
Answer:	If your old amp draws the same power then you'll be fine. If its larger than your pervious amp then absolutely!

Product description

BEHRINGER 5 IN MIXING BOARD W EQ. Mains voltage - 120 V~, 60 Hz

• Premium ultra-low noise, high headroom analog mixer
• State-of-the-art, phantom powered XENYX Mic Preamp comparable to stand-alone boutique preamps
• Neo-classic "British" 2-band EQ for warm and musical sound
• Main mix, stereo CD/tape plus separate headphone outputs
• CD/tape inputs assignable to headphone output or main mix outputs. Power consumption 13 W

User questions & answers

Question:	I didn't really understand the inputs on this mixer. So I have 3 electric guitars, and an electronic drum kit. Can all of these,with mic,be connected
Answer:	This mixer does not have sufficient mono channels for your application. Channels 2-3 and 4-5 are stereo inputs (meaning they are contolled with the same fader). Some of the larger Xenyx mixers will get you the inputs you need.... something with at least 5 distinct faders to control each instrument's mix individually.Hope this helps. :-)
Question:	Does this mixer support 48V Phantom Power
Answer:	Most microphones do not require 48 volts of phantom power. Many condenser microphones only require somewhere between 4 and 12 volts. You should check your mic. It looks like this is a 15 volt feed.
Question:	Can this mixer connect to a PC via a soundcard
Answer:	Yes, to an analog soundcard. All you need is a 1/8" stereo to dual-RCA cord. Mixer has both input and output RCA capability, so you could feed the output of the mixer to the line/mic of the soundcard or feed the output of the soundcard (line out/speaker out) to the input of the mixer. There is also a headphone jack on the mixer so that could also be patched back to the soundcard's line in/mic. For me, I am usually running the PC speaker out to the mixer RCA input -- the volume is controlled by the Main, and then I can either use headphones from the mixer or run the 1/4" output into my guitar amp. Hope this helps.
Question:	What does the 2 track input do
Answer:	The 2 track input allows you to connect an external music source to the xenxyx mixer and then into an amplifier with speakers or headphones using the outputs located near the top. The external music source can be anything that has the red and white RCA outputs such as a cassette/CD player or VCR/disc player (the red and white input/output for the 2 track are called RCA connectors). This is so you can plug in your CD player and also a microphone and an instrument that has a 1/4" output such as a guitar or electric piano and have it all mixed together. Just below the 2 track input are a couple of buttons that allow you to choose whichever output you want, either headphones or amplified speakers (main out). The 2 track outputs on the mixer will allow you to send the vocals and/or instrument mix to a recording device that has the red and white RCA inputs. I hope this helps.

Product features

Xenyx 502

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb Xenyx 502, the mixer with everything you need to give an intimate setting incredible sound. The ultra-compact Xenyx 502 mixer’s 5 Inputs (1 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to the studio-grade, phantom-powered Xenyx Mic Preamp and ultra-musical 'British' channel EQ.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our Neo-classic 'British' 2-band EQ for warm and musical soundmixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

The Ins and Outs

The 5-input, 2-bus Xenyx 502 with xenyx mic preamp can accommodate either a dynamic or condenser microphone. The 2-band British EQ is famous for its warm, musical sound. Play music between sets via the RCA CD/Tape Inputs (main mix or control room/phones assignable) and record your performance to an outboard recording device via the RCA outputs.

Small is Beautiful

Weighing in at a mere 1.2 pounds (0.55 kg), the xenyx 502 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

Amazing Value

No matter what your audio mixing needs, the xenyx 502 provides the performance and features that can take your talent to the next level,Professional sound quality, our legendary Xenyx mic preamps, British-style EQs and rugged reliability make Xenyx 502 ideal for both your live gigs and recording. Try one on today – we have one available in your size!

Product description

• Professional and multi-purpose direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to renowned BEHRINGER OT-2 transformer
• Allows direct connection to speaker outputs with up to 3,000 Watts
• Ground Lift switch eliminates typical ground loop problems

User questions & answers

Question:	can i use this to hook up my 6505+ to my m-box
Answer:	If you have the combo version, it has an XLR out already, so no DI required. The head version doesn't seem to have this option, so you could use the preamp out, but I'm not sure if you could hear a difference between using a DI or running the 1/4" into the line level input of the M-Box. You'll lose the tone you get from the power amp tubes either way. The main point of a DI is to convert a 1/4" instrument signal to a balanced XLR signal if you're going into a stage snake. Effectively running a 50' or 100' 1/4" cable will generally introduce noise and reduce signal quality, so the DI is a great option. I've used this passive DI box in live situations for the past year, and it's worked like a champ. I run my tracks (from an iPod) through it.
Question:	Can this reduce a speaker level signal to a line level signal? E.g. if I wanted to take a speaker level and connect it to a mixer
Answer:	YES. The other answers are not accurate. This device as well as many other DI Boxes can make a Line Level 'copy' of the high power signal going to a speaker. This is a common use however this yes comes with a major caveat. The source (1/4 " INPUT) can be a highly amplified signal, such as the speaker output of a 100W guitar amplifier. The output signal (XLR OUTPUT) will be what the mixer wants (Line Level). CAVEAT: There must be a load connected to the THRU (Parallel OUT on this device). This load can be a speaker or speaker load simulator, basically what you would normally connect to the amp. Without a load connected, no signal flows and nothing will be output. Worse yet, without a load connected, many amps will fry. Amp to DI box to Speaker(1/4" OUT) and Mixer (XLR OUTPUT) is commonly used by guitarists. This allows the PA Mixer or Recording Audio Interface to get all the good sound that the guitar signal chain has built, only missing coloring from the speaker cabinet. If needing your speakers to be silent while still getting a good output on the XLR, adding a decent amp Attenuator or Load Simulator after the DI Box can reduce the power reaching the speaker to or near zero. Note: Many higher end Attenuators and Load Simulators have a built in DI Box.
Question:	I want to record digital piano and play live at church. Should I get Pyle-Pro PDC21 for $8 or is this significantly better
Answer:	A normal DI box is $50 so I wouldn't go too much lower than this. These seem to work well. I've only had one go bad in the past year or so and I purchased like 8 for my church.
Question:	Does this work for connecting the sound output from a PC or MP3 player into a PA system using a Stereo 1/8" TRS to Mono 1/4" TS cable
Answer:	Yes that should be fine! :) You would also need an XLR to connect the DI Box to the PA.

Product features

ULTRA-DI DI400P

The ULTRA-DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI400P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

- Professional and multi-purpose direct injection box for stage and studio applications.

- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers.

- Ultra-flat frequency response due to renowned Behringer OT-2 transformer.

- Allows direct connection to speaker outputs with up to 3,000 Watts.

- Ground Lift switch eliminates typical ground loop problems.

- Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer.

- ¼“ TRS and gold-plated XLR connectors.

- Ultra-rugged, road-suitable metal case.

- Designed and engineered in Germany.

Directly to the Point

With its parallel ¼ " In and Out jacks, the DI400P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR Output sends a balanced signal to your mixer. You can even plug your guitar, bass or keyboard amp’s speaker output into the DI400P, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. The superior ground-lift switch eliminates hum associated with ground loops - and our high-performance OT-2 transformer provides the ultimate in signal integrity.

Truly Transformative

The secret to the DI400P’s ruler-flat frequency response is its Behringer OT-2 balanced-line transformer. Praised by audio engineers the world over, the OT-2 provides superior signal isolation from local AC and RF hum, and the ultimate in impedance matching. The resulting output signal is entirely true to the original source - in all its pristine glory.

Great Sound, Exceptional Value

The ULTRA-DI DI400P is ultra-compact and housed in a tough, road-ready metal case. This means the DI400P DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band. See for yourself what the incredible ULTRA-DI DI400P can do for your sound at your nearest Behringer dealer - or place your order online today!

Product description

BEHRINGER XENYX 1202FX. Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls

• Premium ultra-low noise, high headroom analog mixer
• 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic "British" 3-band EQs for warm and musical sound
• Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• FX send control per channel for internal FX processor and/or as external send

User questions & answers

Question:	FX has long echo effect. Does it provide good echo effect as that of other mixers? Is echo effect is also in Behringer 802 mixer
Answer:	This is the correct cable to use when going stereo to mono. Stereo(2 black rings on actual 3.5mm input prong) to mono(one black ring on 1/4" input prong). BUT 'thru your i-phone'? IDK, thats a little vague. I use this cable with a Guitar/I-Rig/I-Pad/AMP. Guitar 1/4" patch cable out from I-Rig to Guitar.This cable's 3.5mm stereo end from I-Rig to AMPLIFIER 1/4" input. I-Rig into I-Pad headphone jack.
Question:	Is this effects mixer good for Karaoke
Answer:	There are no resistors in this wire. The stereo signals are simply shorted together. This cable's proper use is 1/4" mono output to a 3.5mm stereo input.
Question:	I keep seeing that a mixer doesn’t record voices?? how can i use this for a podcast? whatelse do i need
Answer:	I've been using it to connect ipad/iphone/portable DVD player to a PA system with no problems at all.
Question:	Can you apply the digital effects to just certain inputs like 2 mics, but leave the music alone? I'm looking to upgrade from the 802 without FX
Answer:	It's designed to split in 2 outputs from 1 input and not 3 outputs

Product features

XENYX 1202FX

The compact XENYX 1202FX mixer allows you to effortlessly achieve premium-quality sound, thanks to its 4 onboard studio-grade XENYX Mic Preamps and ultra-musical 'British' channel EQs. Add to this our 24-Bit, dual engine FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects – and the 1202FX becomes an incredibly versatile mixer for your live performances.

Sonically Superior Mic Preamps

The XENYX 1202FX gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of the- art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the XENYX 1202FX provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Built-in Digital Multi-FX Processor

Equipped with our studio-grade 24-bit Multi-FX processor, the 1202FX gives you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. Of course, if you have treasured outboard gear you’ve grown attached to, the 1202FX lets you integrate them into the mix – bypassing the built-in FX processor.

The Ins and Outs

The 12-input, 2-bus XENYX 1202FX has 4 XENYX mic preamps with +48 V phantom power, making it possible to use 4 dynamic or condenser microphones. The 3-band British EQ is lauded throughout the sound engineering world for its warm, musical sound. You can use the world-class onboard stereo FX processor, or the FX Send jack for connecting to your favorite external effects. The built-in RCA CD/Tape Inputs (main mix or control room/phones assignable) and Outputs let you play music between sets, and record your performance to outboard recording gear, respectively.

Amazing Value

No matter what your audio mixing needs, the XENYX 1202FX provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary XENYX mic preamps, British EQs and 24-Bit Multi-FX Processor make the XENYX 1202FX ideal for your live gigs. Try one on today – we have one available in your size!

Product description

BEHRINGER MPA30BT All-in-One Portable 30-Watt Speaker with Bluetooth* Connectivity and Battery Operation

• All-in-one portable PA system with full Bluetooth* connectivity
• Incredibly simple to set-up and use - no technical background required
• 30 Watts of powerful, high-quality sound for audiences of up to 100 people
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• Connect your iPod*, iPhone*, iPad* or any other MP3 player via Bluetooth

User questions & answers

Question:	What type of battery does this speaker use - lithium ion or lead acid
Answer:	Definitely not lead acid but not 100% sure about Li-Ion.
Question:	How long for the battery to charge
Answer:	I don't think it's ever taken more than 30 to 60 minutes to get back up to 100% but then I haven't fully discharged the battery either.

Product description

The UCA202 provides two analog mono inputs and outputs (for monitoring), USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. For a fraction of the cost of many USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Click to enlarge.

energyXT2 makes it easy to manipulate your audio and MIDI file.

Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.

Options Galore

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA outputs: to the TAPE INPUT jacks of your mixer; to powered monitors or to the input channels on the mixer. Connecting to the mixer input channels allows you to use the Aux Send feature of your mixer to build an extremely versatile monitor mix for recording sessions. These are just a few of the possibilities; let us know how you use your UCA202.

No Drivers Required

The UCA202 works with your PC or Mac computer without the need for any setup or driver installation.

Powered via USB

Because the UCA202 is powered by the USB bus, no external power supply is needed. That's one more outlet for all your musical toys.

High-End Audio Quality

The UCA202 features high-resolution 48 kHz converters for high-end audio quality, and the additional S/PDIF optical output allows for direct digital conversion.

Tons of Free Software

Behringer provides a heap of free software available via download, to let you get the most out of your UAC202 right out of the box.

• KRISTAL Audio Engine
  
  KRISTAL Audio Engine is a powerful multi-track recorder, audio sequencer and mixer--ideal for anyone getting started with recording, mixing and mastering digital audio.
• Audacity
  
  Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.
• energyXT2
  
  This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, and turn song ideas into stunning CD or web-ready recordings. energyXT2 includes built-in synthesizers, a drum machine, and internal multi-FX processor.

What's in the Box

Behringer UCA202 U-Control Audio Interface, User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback

User questions & answers

Question:	tv has no audio out but has usb. Will this work
Answer:	You can use it as either. It has Left and Right 1/4 and XLR outputs for stand-alone, and a USB cable if you want to connect it to your computer. Keep in mind, if you do connect it to your computer it will only output a stereo track (2 tracks)
Question:	ASIO Driver
Answer:	I haven't tried it but I don't think it will work. It's made for PC and Android systems. I'm pretty sure the Xbox and ps3 won't recognize it as an input device.
Question:	I want to digitize reel to reel recordings and vinyl LP records. Will this work to input the sound to my laptop
Answer:	The signal strength is great. No direct line of sight necessary. U can actually control the TV box perfectly from another room.
Question:	bit
Answer:	Yes u can use it for quick typing on Ps4, it's not a pc keyboard which would be better fit 2 hand use like a pc keyboard, but if you're like me I prefer this small one it Also don't require a lot of table space like a full keyboard.

Product features

U-CONTROL UCA202

Imagine the Possibilities…

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely versatile monitor mix for recording sessions.

Tons of Free Software

To truly get the most out of your UCA202, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: Record live audio Convert tapes and records into digital recordings or CDs Edit Ogg Vorbis, MP3, WAV or AIFF sound files Cut, copy, splice or mix sounds together Change the speed or pitch of a recording And much more…

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an USB audio interface from other brands, you can have state-of- the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Bridging the gap between your music and the rest of the world—the Behringer U-CONTROL UCA202. Check one out at your local dealer today!