12 best wireless cable for guitar

Product features

Finding Your Tribe on the Road

“Be prepared for it to change you. For us it was an incredible change for the better, but we’ve met people who struggled with being in close quarters with their significant others. The experience is amazing. We are now more at peace than we have ever been, relaxed and in tune with ourselves, and well versed in many aspects of America and its people.” —Jerome Braga, full-time RVer

Product description

• The rugged PGXD1 body pack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.
• The PCDX4 receiver offers 24-bit/48kHz accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
• The WA302 instrument cable plugs into guitar, bass, or any other 1/4 Inch line-level instrument output.

User questions & answers

Question:	Can this system be used with a guitar and bass at the same time
Answer:	The transmitter has only one input/output. So it cannot be used on two instruments at the same time. It can be switched between two instruments very quickly with no "setup" required other than plugging the receiver into the correct amp. Also, as the unit transmits on only one channel, trying to "mix" two instruments would be less than ideal. You could (I'll muddy this up real good now) plug a bass and guitar into a mixer and transmit from a sub out and use the mono mixed signal thru the single channel. Doing so would require enough sound equipment on the reciever to sort out the bass thru a crossover or whatever. This would defeat the purpose of a wireless system...IMHO. My recommendation: buy two units. You'll like the unit.
Question:	Does it work with guitar active pickups
Answer:	It does. It works with active or passive. Also works well with bass or guitar. Works with 'fex. Develop good battery schedule for the transmitter and you'll love it! When the transmitter (instrument unit) batteries die, it does so quickly and without warning. That said, it isn't battery hungry. Battery life is quite acceptable and the batteries are easy to change.
Question:	Can you use it with in ear monitors
Answer:	Yes but you need a separate receiver and transmitter for your in ear monitors.
Question:	will this do mic and instrument at the same time
Answer:	No I do. It believe this will a mic and instrument at the same time. There is only one channel output

Product description

Samson's Concert 99 Guitar combines 80 channels of high-definition audio and extreme reliability into a rugged all-metal, rack-mountable chassis with a stage-ready backlit display. With simple 1-touch setup, convenient monitoring, a 300' UHF operating range and impressive transmitter battery life, this frequency-agile system offers unprecedented value to guitarists, bassists and other stringed instrumentalists in search of reliable wireless freedom.

• Frequency-agile UHF wireless system
• 80 operating channels across 24MHz bandwidth
• Up to eight simultaneous systems per frequency band (region dependent)
• AC adapter and rack mount kit included

User questions & answers

Question:	What do i need to make this work with a pa speaker? is the wire included
Answer:	I use a wire with XLR connectors to link the receiver and my mixer. There is also an unbalanced connector which I think is a 1/4 in. plug.
Question:	Can I use this system with a bluetooth speaker
Answer:	No. You have to use an XLR cable or a quarter inch cable.
Question:	Can this be adjusted to use on the right or left side of your face
Answer:	The person I gave it to uses it on the left side but thinks it may be able to be used on the right.
Question:	is this suitable for violin
Answer:	I don't know. Never tested it on violin

Product features

Samson Concert 99 Guitar

Samson's Concert 99 Guitar combines 80 channels of high-definition audio and extreme reliability into a rugged all-metal, rack-mountable chassis with a stage-ready backlit display. With simple 1-touch setup, convenient monitoring, a 300 feet UHF operating range and impressive transmitter battery life, this frequency-agile system offers unprecedented value to guitarists, bassists and other stringed instrumentalists in search of reliable wireless freedom.

In both single and multi-system arrangements, the CR99 Wireless Receiver offers 80 total operating channels, selecting the best frequency option for your area. Quick to setup, the CR99's Group scan helps avoid conflicting frequencies, while its IR sync function allows users to wirelessly match the transmitter to the receiver’s operating frequency.

The CR99 receiver features a bright, backlit LCD for monitoring on dark stages, even at long distances. The LCD also shows the exact battery life of your transmitter, along with the channel number and its corresponding UHF frequency.

Audio reaches the CR99 Wireless Receiver receiver via the CB99 Beltpack Transmitter, which features Samson's GC32 Guitar Cable with a locking connector. Offering eight hours of battery life using two AA batteries (not included), the CB99 transmitter features a variable Gain control, popless 1-touch Mute button and metal belt clip.

Samson Technologies began in 1980 designing wireless microphone systems and today, we are an industry leader in both consumer and professional audio with three notable brands: Samson Audio, Samson Wireless, and Hartke. Over three decades, Samson has grown from a small two-person operation to a worldwide enterprise, dedicated to innovating new products that will enhance the lives of music and broadcast professionals everywhere.

CR99 Wireless Receiver

GC32 Guitar Cable

CB99 Beltpack Transmitter

AC Adapter & Rackmount Kit

Available in Multiple Configurations & Band Frequencies

Concert 99 Handheld - Frequency-Agile UHF Wireless System

- Includes Samson Q8 Professional Dynamic Microphone Capsule

- Available in D-Band Frequency

Available in Multiple Configurations & Band Frequencies

Concert 99 Presentation - Frequency-Agile UHF Wireless System

- Includes Samson LM10 Omnidirectional Lavalier Microphone

- Available in D-Band and K-Band Frequencies

Available in Multiple Configurations & Band Frequencies

Concert 99 Earset - Frequency-Agile UHF Wireless System

- Includes Samson SE10 Earset Microphone with Miniature Condenser Capsule

- Available in D-Band and K-Band Frequencies

Available in Multiple Configurations & Band Frequencies

Concert 99 Guitar - Frequency-Agile UHF Wireless System

- Includes Samson GC32 Guitar Cable with Locking Connector

- Available in D-Band and K-Band Frequencies

Product description

1/4" phone plug to locking 4-pin connector for use between instrument and A-T UniPak® body-pack wireless transmitters. 36" (0.9 m) cable.

• Features quality construction and state-of-the-art professional connectors for affordable & reliable performance
• ¼" phone plug to locking 4-pin connector for use between instrument and Audio-Technica cW-style body-pack transmitters
• Length: 36" (0.9 m)

User questions & answers

Question:	How long is the cable
Answer:	Yes it will fit
Question:	Will this cable carry full range audio (eg for regular music with bass and vocals) or is it only for guitars
Answer:	Hi, yes it is threaded on the smaller end! Thank you.
Question:	can i use this cable as input to audio technica unipack transmitter from a Mixer output channel
Answer:	Who knows they didn't fit my 2013 softail, had to send them back they weren't even close to working!
Question:	Sorry for silly question, but how do I call this 4-pin connector instead of "locking 4-pin"? From my search it's plugged into a "4-pin push-pull plug
Answer:	I'm not positive. I put these on my harley which run showa forks, if your Yamaha has showa forks it's a good possibility they will work. These slide into the upper tree and have a bolt that secures them through the upper tree. If yours are clamped by the upper tree you will loose some of the lift and have to put a bolt in it still to seal the fork tube. 41mm wideglide models clamp at the top maybe search for those if yours clamp.

Product features

Q&A with Author Charles Platt

Some of us learned how to use workshop tools from our parents. My book is written for everyone else, particularly readers ages 10-20. Shop classes at schools may not teach people creatively, and probably won't teach anyone how to use plastics as well as wood. I fill in those gaps.

What need does it fulfill for those readers?

You don't need prior experience. You don't even need a workbench, and you don't need to spend much money. You end up knowing how to fabricate objects that are useful and/or beautiful, using wood and plastic. No other book explains how to do this.

What skills will your readers learn?

A saw, a pair of clamps, an electric drill—these things are basic. But choosing them and using them is not so basic. My book lists the sources, explains the principles, and teaches the use of tools with step-by-step photographs and diagrams. There are more than 20 projects.

Product description

Relay G55 Digital Guitar Wireless System Based on patented, fourth-generation technology, Relay is leading the digital wireless revolution for guitarists. The Relay G55 system delivers tour-grade digital wireless in a compact, half-rack format so you can experience wireless freedom without compromising your tone. Featuring 12 channels of compander-free 24-bit audio, full 10Hz–20kHz frequency response and 117dB dynamic range, the G55 signal is so pure and strong it sounds just like a wired guitar. 2.4GHz operation and proprietary DCL signal protection provide rock-solid performance while one-step setup and worldwide, license-free operation make Relay G55 incredibly easy to use.

• Tour-grade digital wireless in a compact, half-rack format
• Signal so pure and strong it sounds just like a wired guitar
• 12 channels; 4th-generation digital wireless platform
• One-step setup, license-free operation worldwide

User questions & answers

Question:	Can this system be used with active pickups or an acoustic with battery and preamp
Answer:	This loos like quality cable, so I see no reason why it wouldn't be able to carry the full audio spectrum. The main concern I would have is whether or not the connectors will work for our intended use.
Question:	May this be used for a lavalier microphone too
Answer:	I don't know what connector the unipak uses - probably the same, but I urge you to check first. Remember though that this is a mono cable - not stereo.
Question:	Can two of these be used at once? Will the frequencies interfere with each other
Answer:	I call it a 4-pin Hirose, but that may be from the video world.
Question:	Will this unit work for bass guitar
Answer:	While holding fork leg, insert fork extensions into legs. Then use top cap/ or hand to torque extension to 35 pounds. Clamp onto extension to remove top cap and finish install.

Product description

BOSS WL‑50 Guitar Wireless System

• Plug-and-play wireless system in a stompbox-size format for pedalboards
• Optimum wireless connection set automatically, with no complicated setup required
• Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)
• Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
• Plug the transmitter into the receiver’s docking port for charging and automatic wireless setup
• Selectable cable tone simulation options: short, Long, and bypass
• Receiver powered by optional psa-s adaptor or two AA batteries

User questions & answers

Question:	Is it possible to also charge the transmitter via usb or does it only charge when inserted in the base unit
Answer:	It is 22 inches long and 11 inches deep. It holds more than you would think, and it also has a few small compartments.
Question:	Will it work on a telecaster type jack
Answer:	Yes
Question:	Will it work on a telecaster type jack
Answer:	If you are a smalll child maybe, but teenager or older no.
Question:	Does it need a cable going through the amp
Answer:	Yes. It's protect your gps screen because it's really hard case. I'm using them now. It work great and protect my Garmin GPS.
Question:	Will this fit a youth mask
Answer:	No, will not fit both
Question:	Will this fit force v3 two piece mask
Answer:	The case is small: you can carry it in one hand. There's no carry strap. I always carry it inside my backpack. I'm sure it would be waterproof in a heavy rainfall, but if it got dropped in water and floated for some time, some wetness may possibly leak in through the zipper. But I don't know; I've never tried it! I have no complaints with the case. It's exactly what I was looking for: a strong case to store a pico projector.
Question:	Will this fit rip-it defense softball fielders mask
Answer:	It is very big inside and out. It has more than enough room for my Garmin Nuvi 2597, power cord, suction cup base and the heavy dashboard mount. All with room to spare.
Question:	Will it fit Easton M10 hockey style mask
Answer:	No, it does not

Product features

WL-50 Wireless System　

With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.

Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again!

Lightning-Fast BOSS Wireless Technology

Equipped with high-performance BOSS wireless technology that debuted in the Katana-Air wireless guitar amp, the WL-50 delivers exceptional sound quality with wide dynamic range. Working in the 2.4 GHz frequency band, the system automatically accesses the optimum channel to ensure rock-solid audio performance with absolutely no drop-outs. And with ultra-low latency of just 2.3 ms, you’ll always enjoy great playing feel with no lag whatsoever. Up to 14 BOSS wireless systems can be used simultaneously in one space, allowing multiple musicians to enjoy wireless freedom at the same time.*

*Environmental conditions may affect the actual number of simultaneous systems available.

Just Another Pedal on Your Board

The WL-50 has a slightly smaller footprint than a standard BOSS compact pedal and can be powered just like your other stomps, making it an easy addition to any pedalboard setup. Simply place it at the beginning of your chain and connect the receiver’s output to the first pedal. The receiver is also equipped with a regular ¼-inch input jack, so you can always use a traditional guitar cable in a pinch.

The WL-50 features a built-in dock that’s used to charge the transmitter and establish the wireless connection. The system’s streamlined profile is maintained even when the transmitter is docked, with a total height that’s about the same as a normal BOSS stomp.

Plug In and Rock

Once you’ve installed the WL-50 on your board and charged the transmitter, it’s literally as simple to use as a standard guitar cable. Just dock the transmitter in the receiver, wait about 10 seconds, and then plug the transmitter into your instrument. That’s it! The optimum wireless connection is set automatically during docking, with no other user operation required.

The WL-50 includes two selectable cable tone simulation options that reproduce the natural capacitive effect that’s introduced when using a guitar cable with standard passive pickups. You can also bypass the effect when cable tone simulation is not desirable, such as when using an acoustic/electric guitar with an onboard preamp or an instrument with active pickups.

Battery-Powered Operation for Mobile Gigging

At street gigs and other mobile performance situations, running your pedals on battery power is often the best choice. The WL-50 receiver can run for up to ten hours on two AA batteries, allowing you to take your wireless setup with you! While running on battery power, the receiver is unable to charge the transmitter. But don’t worry—you can still charge it using a common USB adaptor (5 V/500 mA or higher), the same type used with most smartphones and tablets.

When the receiver is powered via a BOSS PSA-S adaptor, it becomes a power distribution center for other stomps on your board. By using an optional PCS-20A daisy-chain cable, you’re able to power a number of BOSS compact pedals at the same time.

Product description

Relay G90 redefines the wireless experience for guitarists and bassists. Its superior sound, professional dependability and refreshing simplicity are unavailable from other wireless systems.

Superior Sound

Relay G90 provides a pure signal. Its clarity rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 300 feet. Traditional wireless systems compromise their sound by rolling-off crucial high- and low-end frequencies and compressing their signals. Relay G90 offers superior sound with full bandwidth and zero compression.

Professional Dependability

Relay G90 broadcasts over the 2.4GHz band. This keeps the signal free from many kinds of interference. For added security, Relay G90 employs exclusive signal protection technology--each channel broadcasts an encrypted data stream on four different frequencies simultaneously. Traditional wireless systems, on the other hand, are susceptible to dropouts, static and many other kinds of interference.

Receiver features side-mounted 1/4-inch ins and outs and internal antennas, making it easy to add to a pedal board.

Refreshing Simplicity

Relay G90 is easy to use. Bright LCDs and LEDs on the transmitter and receiver display all critical system functions including power, status, channel number, battery life, and more. Plus, Relay G90 finds open channels right out of the box. No scanning, no searching, no hassles. Antennas can be connected in the front or rear of the unit.

Attached to Your Guitar Cable?

For players attached to their cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? Relay G90 sounds just like a cable, but it can also sound just like your cable. Relay G90 features EQ settings to match the frequency response of your guitar cable.

VWT

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.

Superior Specs

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable Tone Simulation

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander-Free

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

Remaining compander-free gives better sound than analog wireless systems.

DCL

Exclusive DCL (Digital Channel Lock) technology automatically locks out all sources of interference. The only sound that will come out of your amplifier is you--not static, not Top 40 radio--just you.

2.4GHz broadcast

The best way to avoid interference? Don't get in its way. Relay digital wireless systems broadcast in the 2.4GHz band, which successfully avoids interference caused by TV stations, public safety broadcasts, cell phone towers, and other high-powered sources.

What About WiFi?

Worried about interference caused by 2.4GHz WiFi networks and Bluetooth devices? Don't be. Relay digital wireless systems use uniquely addressed and encoded digital transmission technology. Your tone will make it from your transmitter to your receiver free of interference.

Don't waste time scanning for open channels.

All Channels, All the Time

All channels in all Relay digital wireless systems work all the time. Too good to be true? Maybe for an analog wireless system. Relay digital wireless systems are different. There's no website to reference, and no need to scan for open channels.

The Wireless Revolution

Relay G90 is proudly ushering in a better-sounding and more dependable era of wireless guitar systems. It will inspire you to explore new areas of your music and the stage.

• 300-foot range; 12 user-selectable channels
• Broad 10Hz – 20kHz frequency response; Superior 118 dB dynamic range; Zero compression Broadcasts in the 2.4GHz band: optimal for guitar wireless, approved for use in Europe, South America, Asia and Australia.
• Receiver: Streamlined interface; LCDs and LEDs display all critical system functions; AES/EBU 96kHz/24-bit digital output; Guitar tuner pass-thru; Front-/rear-mountable antennas; IEC Mains 90-240V worldwide power operation
• Encrypted data stream for added signal protection; Each channel broadcasts on four different frequencies simultaneously
• System includes transmitter, 1RU rack-mountable receiver and all necessary accessories including antennas, guitar cable, power supply and batteries
• 300-foot range; 12 user-selectable channels
• Broad 10Hz - 20kHz frequency response; Superior 118 dB dynamic range; Zero compression Broadcasts in the 2.4GHz band: optimal for guitar wireless

User questions & answers

Question:	Is this made for a 19 inch rack? Dimensions say different
Answer:	Yes. It should. Note - it's not a standard 1/4 inch or 1/2 input (it's a TA4F connector). Look for this item: "Line 6 HS70 - Headset Mic", it states it is compatible with: Line 6 XD-V55, XD-V70, XD-V75, Relay G50, Relay G55, Relay G90. Hope this helps.
Question:	Will it sound clear live on high volume on a high gain metal setting
Answer:	Yes - you put them on frequencies and you are fine - our band does it all the time.
Question:	What do I need to plug it up to to make the noise sound clear live on a high volume high gain metal setting
Answer:	Yes. Because this is a digital wireless system, it is better suited to handle the full frequency range of a bass guitar than traditional analog wireless systems. Thanks!
Question:	How long is the latency created by the ADA process
Answer:	Hello. It is 36 inches (3 feet, 0.9 meters) long, as shown in the listing. Thank you for your interest!

Product description

Have you always dreamed about going wireless with your instrument, but were put off by the complicated setup, tone loss, and bulky adds-ons? If so, the WL-20 Series is for you! Driven by new lightning-fast BOSS tech, these ultra-compact music Tools deliver premium sound and plug-and-play operation that completely eliminates all the hassles normally associated with wireless systems. Once you experience the easy wireless independence provided by the WL-20 Series, you’ll never go back to using a standard cable again! With no worries about cable management, you’re able to move about freely while playing at home, jamming with friends, and performing on Stage. During sound check at a gig, You can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

• Plug-and-play wireless systems for guitar, bass, and other electronic instruments
• No complicated setup required—simply Dock the transmitter and receiver together for about 10 seconds to set the optimum wireless Connection
• Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 50-foot/15-meter range (line-of-sight Propagation)
• Built-in rechargeable batteries provide up to 12 hours of continuous playing time
• Simple charging with a standard USB adaptor (5 V/500 mA or greater)
• Cable tone simulation reproduces the natural capacitive effect of a 10-foot/3-meter guitar cable (WL-20 model only)
• Spare wl-t transmitter available separately

User questions & answers

Question:	Which end provides the "cable tone simulation", transmitter or receiver
Answer:	Yes, this guitar system support on 4 channels.As long as your two sets match well and not at the same channel, there will be no interference.
Question:	So there is no need for "channels
Answer:	I have not tried that but believe that would be doable. I wouldn’t use the same model for both Guitar and mixer to speakers. I would be concerned with system issues. I have several different brands and find I can mix them with other instruments without any interference. Overall these are really great at a reasonable price. I have used more expensive and bulkier units that didn’t work as well.
Question:	What is the case made of? Plastic or metal
Answer:	Yes in fact I have a number of other 2.4 ghz wireless systems that don't work with active pickups? These work perfectly with all my instruments with active pickups...Even my Uke with my LR Baggs Five O pickups did not work with any other wireless but my Lekato's do. These are also my go to devices to daisy chain powered speakers and sending aux mixes to house sound systems...$58. an amazing deal.
Question:	What are the actual latency specs
Answer:	Not tried that

Product features

WL-20/WL-20L Wireless System

Have you always dreamed about going wireless with your instrument, but were put off by the complicated setup, tone loss, and bulky adds-ons? If so, the WL-20 series is for you! Driven by new lightning-fast BOSS tech, these ultra-compact music tools deliver premium sound and plug-and-play operation that completely eliminates all the hassles normally associated with wireless systems. The built-in rechargeable batteries provide up to 12 hours of continuous playing time and can be charged with a standard USB adaptor (5 V/500 mA or greater).

Once you experience the easy wireless independence provided by the WL-20 series, you’ll never go back to using a standard cable again! With no worries about cable management, you’re able to move about freely while playing at home, jamming with friends, and performing on stage.

Lightning-Fast BOSS Wireless Technology

Equipped with high-performance BOSS wireless technology that debuted in the Katana-Air wireless guitar amp, the WL-20 series delivers exceptional sound quality with wide dynamic range. Working in the 2.4 GHz frequency band, the optimum channel is set automatically to ensure rock-solid audio performance with absolutely no drop-outs. And with ultra-low latency of just 2.3 ms, you’ll always enjoy great playing feel with no lag whatsoever. Up to 14 BOSS wireless systems can be used simultaneously in one space, allowing multiple musicians to enjoy wireless freedom at the same time.

Automatic Wireless Setup: Just Plug In and Rock!

With the WL-20 series, there’s no fiddly channel setup required. A WL-20 system is literally as simple to use as a standard guitar cable. The small transmitter plugs into your instrument, while a matching receiver plugs into a pedal or amp. Just dock the transmitter and receiver together for about 10 seconds to automatically set the optimum connection. That’s it!

During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

WL-20: Built-In Cable Tone Simulation

If you play a guitar or bass with standard passive pickups (the most common pickup type), the WL-20 model is probably your best choice. It includes built-in cable tone simulation, which reproduces the natural capacitive effect that’s introduced when using a 10-foot/3-meter guitar cable with passive pickups. This effect rolls off the treble very slightly, giving you the warm tone you’re used to hearing with a normal cable.

WL-20L: No Cable Tone Simulation

The WL-20L model is functionally identical to the WL-20, with the exception that it eliminates cable tone simulation. This makes it the best choice for instruments where cable capacitance has little or no effect on the tone, such as an acoustic/electric guitar with an onboard preamp, a guitar or bass with active pickups, or a line-level device like a keytar or Roland’s Aerophone digital wind instrument. The WL-20L also works great with passive pickups if you don’t need the subtle treble roll-off provided by cable tone simulation.

Product description

Relay G30 redefines the wireless experience for guitarists and bassists. Its superior sound, professional dependability and refreshing simplicity are unavailable from other wireless systems.

Polycarbonate stompbox-style system Side-mounted 1/4-inch ins and outs on receiver Internal antennas on receiver Reciever has standard 9VDC power 10Hz-20kHz frequency response 6 compatible channels 100 feet line-of-sight transmission range (may vary with local conditions) 24-bit Delta Sigma, 128 times oversampling Transmitter has approx. 8 hour battery life (2 AA batteries)

Superior Sound

Relay G30 provides a pure signal. Its clarity rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 30 meters. Traditional wireless systems compromise their sound by rolling-off crucial high- and low-end frequencies and compressing their signals. Relay G30 offers superior sound with full bandwidth and zero compression.

Professional Dependability

Relay G30 broadcasts its robust signal over the 2.4GHz band. This keeps the signal free from many kinds of interference. For added security, Relay G30 employs exclusive signal protection technology: it broadcasts an encrypted data stream on six channels simultaneously.

Receiver features side-mounted 1/4-inch ins and outs and internal antennas, making it easy to add to a pedal board.

Switch between cable and wireless systems without having to adjust the tone settings on your amplifier.

Traditional wireless systems, on the other hand, are susceptible to dropouts, static and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 160 kilometers, or more.

Refreshing Simplicity

Relay G30 is a low-profile system that's easy to use. The lightweight transmitter remains out of the way of your performance, and the rugged receiver can sit on top of your amp or be added to your pedal board. The receiver offers easy-to-read LEDs that display power, status and battery life.

Attached to Your Guitar Cable?

For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? Relay G30 sounds just like a cable, but it also sounds just like your cable. Relay G30 features two EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G30.

VWT

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.

Superior Specs

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable Tone Simulation

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander-Free

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

Remaining compander-free gives better sound than analog wireless systems.

DCL

Exclusive DCL (Digital Channel Lock) technology automatically locks out all sources of interference. The only sound that will come out of your amplifier is you--not static, not Top 40 radio--just you.

2.4GHz broadcast

The best way to avoid interference? Don't get in its way. Relay digital wireless systems broadcast in the 2.4GHz band, which successfully avoids interference caused by TV stations, public safety broadcasts, cell phone towers, and other high-powered sources.

What About WiFi?

Worried about interference caused by 2.4GHz WiFi networks and Bluetooth devices? Don't be. Relay digital wireless systems use uniquely addressed and encoded digital transmission technology. Your tone will make it from your transmitter to your receiver free of interference.

Don't waste time scanning for open channels.

Full Quality, No Matter What

Whether you're playing two feet from your Relay G30 or at the edge of its range, you get the same great specs: full frequency response, superior dynamic range, cable-inspired dependability, and 24-bit A/D conversion.

All Channels, All the Time

All channels in all Relay digital wireless systems work all the time. Too good to be true? Maybe for an analog wireless system. Relay digital wireless systems are different. There's no website to reference, and no need to scan for open channels.

• 30-meter range, line-of-sight
• Broad 10Hz – 20kHz frequency response; Superior 118 dB dynamic range, 8 hours of battery life (AA alkaline batteries)
• Comes complete with transmitter, receiver (Rugged polycarbonate shell) and all necessary accessories including cable, power supply and batteries
• 2.4GHz band is optimal for guitar wireless, approved for use in Europe, South America, Asia and Australia.
• Encrypted data stream for added signal protection; Simultaneous broadcasts on six channels

User questions & answers

Question:	How long is the 1/4" cable that is included
Answer:	Why wouldn't you, it's a GUITAR strap, and an acoustic is a GUITAR.... Don't listen to the dum dum who said it is made for electric guitars, as they are obviously clueless.
Question:	Does the transmitter make any pop sound when you turn ON or OFF the power switch? This is important since it doesn't have a mute button like the G
Answer:	It's a light purple sort of neon like but definitely not a wine color
Question:	I'm looking at using this with an acoustic electric bass. I see lots of comments about how great it makes guitars sound, but nothing about a bass
Answer:	They sure are. These come 100% ready to bolt on. The strap screws are slightly larger that the factory screws so screw them in slowly.
Question:	Will the g30 work in usa and does it do good with a bottom b bass string
Answer:	Depends on the shape of your guitar. I have a long (extra connector pack purchased separately) & short combo on the neck heel/ lower body of my SG and the neck strap sits on the horn and the lower sits on the body while in the case. It hasn't hurt anything.

Product description

Relay G50 12-channel wireless system redefines the wireless experience for guitarists and bassists. Its superior sound, professional dependability and refreshing simplicity are simply unavailable from other wireless systems.

Superior Sound

Relay G50 provides a pure signal. Its clarity rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise their sound by rolling-off crucial high- and low-end frequencies and compressing their signals. Relay G50 offers superior sound with full bandwidth and zero compression.

Professional Dependability

Relay G50 broadcasts over the 2.4GHz band, which keeps its signal free from many kinds of interference. Traditional wireless systems, on the other hand, are susceptible to dropouts, static and many other kinds of interference. For added security, Relay G50 employs exclusive signal protection technology--it simultaneously broadcasts encrypted data streams to multiple antennas. Refreshing Simplicity Relay G50 is a low-profile system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers easy-to-read LEDs that display power, status and battery life. Its dual 1/4-inch outputs make it an easy addition to your pedal board.

Receiver features side-mounted 1/4-inch ins and outs and internal antennas, making it easy to add to a pedal board.

Attached to Your Guitar Cable?

For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? Relay G50 sounds just like a cable, but it also sounds just like your cable. Relay G50 features EQ settings that match the frequency responses of typical guitar cables.

VWT

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range--just like a high-quality guitar cable.

Superior specs

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander-Free

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

Remaining compander-free gives better sound than analog wireless systems.

DCL

Exclusive DCL (Digital Channel Lock) technology automatically locks out all sources of interference. The only sound that will come out of your amplifier is you - not static, not Top 40 radio, just you. Guaranteed.

2.4GHz broadcast

The best way to avoid interference? Don't get in its way. Relay digital wireless systems broadcast in the 2.4GHz band, which successfully avoids interference caused by TV stations, public safety broadcasts, cell phone towers, and other high-powered sources.

What about WiFi?

Worried about interference caused by 2.4GHz WiFi networks and Bluetooth® devices? Don't be. Relay digital wireless systems use uniquely addressed and encoded digital transmission technology. Your tone will make it from your transmitter to your receiver free of interference.

Don't waste time scanning for open channels.

Full quality, no matter what

Whether you're playing two feet from your Relay or at the edge of its range, you get the same great specs: full frequency response, superior dynamic range, cable-inspired dependability, and 24-bit A/D conversion.

All channels, all the time

All channels in all Relay digital wireless systems work all the time. Too good to be true? Maybe for an analog wireless system. Relay digital wireless systems are different. There's no website to reference, and no need to scan for open channels.

• 200-foot range, line-of-sight
• Wide dynamic range of more than 110dB(A weighted).Broad 10Hz – 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion, 8 hours of battery life (AA alkaline batteries)
• Comes complete with transmitter, receiver (Rugged metal enclosure) and all necessary accessories including locking cable, power supply and batteries
• 2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
• Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels

User questions & answers

Question:	Is this only able on line of site or can i play it in another room. As in amp in one room while playing inAnother room
Answer:	It is possible to play in another room, however the recommendation is to always have a line of site when you're on stage or performing live for the best possible performance from the system.
Question:	Do I still need a preamp for my acoustic transducer pickup
Answer:	Yes, I would think so. There is no gain boost.
Question:	Can you add transmitters? Assuming it connects to the guitar strap, wouldn't this be best for a two guitar rig
Answer:	Yes you can. Just set the channel on the 2nd transmitter to the same channel on the receiver, and the 1st transmitter. This is assuming a 2 guitar rig is you switching between 2 guitars.
Question:	Does the transmitter come with a 1/4 cable
Answer:	Yes it does, it comes with a special 1/4 cable that attaches to the transmitter.

Product description

The Relay G10S guitar wireless system is as powerful as it is compact. The stompbox-sized pedal offers professional features, rugged build quality, and plug-and-play operation at an easily affordable price. The Relay G10S system integrates seamlessly into any pedalboard or can function as a standalone unit. It features an impressive range of up to 130’ line-of-sight, enabling you to move about untethered on any sized stage—and the Relay G10S works equally well with bass. The Relay G10S is the newest member of the relay wireless family, a series of products that are embraced by professionals for their reliability, ease of use, and transparent sound. Thanks to the extensive experience that Line 6 brings to designing and manufacturing wireless products, you can depend on the Relay G10S to provide clear and accurate instrument sound, free from interference. Plus, the Relay G10S is compatible with the relay G10, G30, G50, G55, and G90 guitar wireless systems.

• 24-Bit lossless digital sound quality
• Up to 130' Range line-of-sight
• 9V DC power supply included
• Automatic or manual frequency selection
• Balanced XLR DI and 1/4" Outputs
• No setup required
• G10T transmitter with rechargeable battery included

User questions & answers

Question:	If i set up, for example 4 guitars on stage, can I have 4 recievers plugged into each guitar at once ? Will I be able to play them separately
Answer:	It has a mini-din connection just like what you would plug into the back of a computer. Course you can buy connectors for anything and no it doesn't play out of both speakers, just one speaker will have the sound. Still a good little basic metronome. I've moved on to the Korg MA-1 and I like that one also.
Question:	Can you charge one transmitter while using a second transmitter
Answer:	/Duration 0:06Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:06 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } hopefully you can freeze the video and expand, I could not upload a pic for some reason
Question:	I read one ding in the reviews, but does anyone else play an instrument with onboard active electronics through the G10S
Answer:	mine only came with 1
Question:	Does the base unit have any option for battery
Answer:	All of the features must be manually adjusted. The tempo will not increase or decrease automatically. Not quite that sophisticated.

Product features

Easy To Use

Getting up and running with the Relay G10S is simply a matter of turning it on - no complicated setup required. When the transmitter is docked, the unit immediately locates and locks onto the strongest available wireless frequencies. You can also adjust the frequency selection manually, although you'll probably never need to.

Pro Outputs

Relay G10S is equipped with two different outputs, making it extremely versatile. In addition to a standard 1/4" jack for connecting it to your pedalboard or amp, there's also a balanced XLR output that allows the G10S to be used as a wireless DI box for applications such as connecting acoustic guitars or basses directly to a P.A.

Versatile Power Options

The Relay G10S includes a convenient 9V DC power input, enabling you to connect it to either the included power adapter, or your pedalboard's power supply. The G10T transmitter runs on a rechargeable battery that lasts for six hours. What's more, the battery automatically enters sleep mode when you're not playing, significantly extending how much playing time you can get from a single charge. When you're ready to recharge, just plug the G10T into the Relay G10S receiver and it automatically begins recharging.

Crystal Clear Sound Quality

Relay G10S offers pristine, 24-bit lossless digital audio quality. It's equipped with Cable Tone, a proprietary Line 6 technology that matches the sound and response of an actual guitar cable for additional realism.

Designed For Performance

The Relay G10S is the newest member of the Relay Wireless Family, a series of products that are embraced by professionals for their reliability, ease of use, and transparent sound. Thanks to the extensive experience that Line 6 brings to designing and manufacturing wireless products, you can depend on the Relay G10S to provide clear and accurate instrument sound, free from interference. While some wireless products in this range are housed in plastic, the G10S features a rugged metal housing designed to withstand the rigors of gigging. The RF and battery status indicators are conveniently located on the face of the pedal, making it easy to monitor system status at a glance.

Plus, the Relay G10S is compatible with the Relay G10, G30, G50, G55, and G90 guitar wireless systems.