13 best stands with mic xlrs

Product description

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

• Rotates Full 360-Degrees with Minimal Noise
• Fixed, Internally Guided 10’/3. 05m XLR Cable Included
• Spring-Loaded Articulating Arm with 4. 4 lbs. /2 kg Max Weight Capacity & 32. 25”/940mm Max Extension
• Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness
• Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models
• Exterior Dimensions: 20. 50”/520mm (L) x 4. 75”/120mm (W) x 2. 50”/64mm (H), Net Weight: 3. 4 lbs. /1. 54 kg

User questions & answers

Question:	Why does this product come with a single AAA battery
Answer:	The pick holder should be attached to the front edge of the tray. The picks are inserted upward from the bottom edge. See the image.
Question:	Do you need to download a software and yes which one
Answer:	Sorry, I can't say for sure, but I can say that I was surprised that a can with a koozie fits in it perfectly. You might be able to measure that way. I'm 100% satisfied, I bought 2.
Question:	i have a question with this mic arm work with the audio technica at
Answer:	I had a problem with the wobbly tray as well. After removing the packing material I had to tighten the two nuts on the bottom of the tray to steady it.
Question:	Can I easily remove the xlr cable and replace it with my preferred cable or if the cable goes bad
Answer:	It will attach to any pole that is between 1/4" and 2" diameter. I just tried it on one mic pole that has a diameter of 1/2" and the stand attached just fine with a firm grip.

Product features

360-Degree Rotation

Full 360-degree rotation. Engineered to produce minimal sound when moved. (reduces the potential for interruptions during sound-sensitive recordings)

Versatile Mounting

Includes both a clamping and fixed mounting base attachment to best accommodate your particular setup needs

Heavy Duty Threaded Mount

Heavy-Duty 70mm threaded boom end supports microphones up to 4lbs

Integrated XLR Cable

Black-powder coated steel construction with integrated XLR Cable (10' Length)

Gator Frameworks Deluxe Desk-Mounted Broadcast Microphone Boom Stand For Podcasts & Recording; Integrated XLR Cable (GFWMICBCBM3000)

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

Product description

Description

Pro-grade male to female xlr cable length is 6.6ft, constructing with copper braided shielding providing maximum cancellation of hum and noise.

Heavy duty construction mic stand is an adjustable positioning screw, can easily clip to any desktop up to 1.1’’thick, movement is solid and smooth.

Double layered screen pop filters helps to minimize plosives like Ps and Bs and can cut down on sibilance.

This is a great combo for singers and actors alike who want help achieving the best possible performance. It is widely used in professional recording studios, stages, broadcasting , etc.



Specification

Microphone XLR Cable Feature

XLR cable Length: 2 Meter, Approximately 6.6ft

XLR Cable OD: 6.6mm (20AWG)

Heavy Duty Construction Mic Stand Feature

Item Weight: 0.96 ounces

Double Layered Screen Pop Filters

Item Weight: 6.9 ounces



Package include

1* InnoGear Microphone XLR Cable

1* InnoGear Microphone Scissor Arm Stand

1* InnoGear Double Layered Screen Pop Filters

1* Warranty Card

• All-In-One Combo: Package includes all the items you need for studio recording and live sound, a microphone stand, pop filter and 6.6ft male to female XLR cable.
• Pro-grade Male to Female XLR Cable: 6.6ft mic cable is constructed with copper braided shielding provides maximum cancellation of hum and noise; Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
• Heavy Duty Construction Mic Stand: Super-strong spring protects microphone from shaking, suddenly dropping and making noise. Comes with one table mounting clamp with protective layer of sponge, an adjustable positioning screw, can easily clip to any desktop up to 2” thick.
• Double Layered Screen Pop Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.
• Universal Compatibility: Equipped with clear manual instruction and standard 5/8"-27 male to 3/8"-16 female threaded screw adapter. It works perfectly with condenser microphone and other microphone pop filter pop guard microphone cable mic cable xlr audio cable

User questions & answers

Question:	Will this work with mxl 70 shock mount where mic will be facing up instead of down
Answer:	I can only assume for the LED light.
Question:	I used the thread to use it with the blue snowball. Now I want to disassemble it, how do I take that thread out of the snowball mic
Answer:	Hello, No - This is a microphone boom arm and requires no software to be used as intended. If you have any other questions, please reach out to us directly. Thanks!
Question:	Can i use this with marantz professional mpm1000 | large diaphragm condenser microphone
Answer:	Hello, Yes, an Audio Technica AT2035 should work just fine with this boom arm. If you have any questions, please reach out to us directly. Thanks!
Question:	Will this work with the audio technica at2020 studio recording microphone
Answer:	Hello, Removing the cable in this product would require knowledge of how to solder an XLR cable back together. The Cable built into this is put together inside the housing at the factory. Because of this we would not recommend trying to take this apart and remove the cable. This is an issue we are bringing up to our product team, and may be improved upon in the future. However, for now our answer remains as no. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!

Product features

InnoGear Microphone XLR Cable

• Microphone cable for studio recording and live sound
• High-quality XLR male and female connectors
• 3-pin XLR male to XLR female
• Protective metal housing
• Flexible PVC jacket with 6.0mm outer diameter
• All copper conductors and inner copper spiral shielding
• Shielded cable reduces interference and excess noise

Product description

The MPM 1000 is perfect for podcasting applications or capturing high quality audio from vocalists, melodic instruments, percussion, drum kits and more. At the heart of the MPM 1000 is a 18mm pure aluminium plated condenser capsule with a directional cardioid polar pattern. The result? A wide ranging frequency response (20 – 20,000Hz), high sensitivity ( 38dB ± 2dB (0dB = 1V/Pa @ 1kHz)) and a fast transient response that combine for premium capture and faithful recreation of every subtle nuance of a sung or narrated vocal part all with minimal interference from unwanted ambient noise. With the MPM 1000, complicated setups are a thing of the past. Thanks to an included windscreen, a purpose designed shock mount for mounting to a traditional mic stand, a tripod stand, and even an XLR cable, all the core tools for seamless connectivity are thoughtfully included for instant recording and creative potential. When combined with low self-noise (17dBA) and signal to noise ratio (77dB) specifications, pristine audio capture is guaranteed every time.

• Studio grade recording without the price tag: Desktop or stand mounted condenser microphone with superior audio performance for crystal clear audio capture
• Keeping your recording on point: Directional cardioid mic capsule perfect for podcast recording, gaming, studio recording and streaming
• Sound you can trust: Smooth, wide ranging frequency response (20 to 20,000 hertz) captures the full audible spectrum
• Hear every detail: High sensitivity and low signal to noise ratio records every subtle nuance of your source audio
• Everything you need for perfect audio capture, anywhere: Includes windscreen, shock mount, desktop tripod stand and xlr cable; Compact and lightweight form factor for portable audio capture

User questions & answers

Question:	Do you need an audio interface for this when using with a laptop? Will it make it sound better? If so what is a cheap one that will work well? Thanks
Answer:	No you don't need an audio interface. It just plugs right into your laptop with a USB cable.
Question:	Is the included xlr cable xlr to xlr? can i plug it into the xlr socket of a scarlett solo audio interface and be ready to record
Answer:	Marantz Pro support here! The XLR cable has the XLR connection on both ends, making it perfect to connect up to a Scarlett Solo. If you have any other questions, please feel free to email me directly at [email protected].
Question:	What is the frequency range? Is there a manual with specs? Thanks
Answer:	Marantz Professional support here! The full specs of the M4U are: Type: Electret condenser Polar Pattern: Cardioid Frequency Response: 70 Hz - 16 kHz Sensitivity: -38 dB ± 3 dB (0 dB + 1 V/Pa @ 1 kHz) Output Impedance: 150 Ω ± 30% (@ 1 kHz) Load Impedance: ≥ 1000 Ω Self Noise: 18 dB A Max SPL: 136 dB (@ 1 KHZ ≤ 1 % T.H.D.) S/N Ratio: 76 dB Weight: 0.56 lb (252g) microphone only Dimensions: 1.89” diameter x 7.28” (48 x 185mm) microphone only I hope this helps! If you have any other questions, please call or email us using the contact information on marantzpro.com/support.
Question:	Is this good for recording songs
Answer:	For ~$15 I'd highly recommend picking one up; though the quality of your recording will have a lot to do with room setup, microphone location, computer noise - since this is a USB microphone, etc. But if you're looking to start recording vocals (probably not suited to instruments except maybe acoustic guitar / viola?) I can't imagine you'd be disappointed. Check this out as well, just went up today: https://www.youtube.com/watch?v=5_pnJAH7y_E

Product features

MPM-1000 - Superior Studio Sound

Whatever you want to record, guaranteeing the best sound possible doesn't get easier than this. MPM-1000 is the perfect solution for podcasting, vlogging, gaming or studio-grade recording that fuses studio-quality sound with everything you need to start recording right out the box.

Product description

Amazon Basics Tripod Boom Microphone Stand

An Amazon Brand



CBI MLC LowZ XLR Male to XLR Female Microphone Cable, 20 Feet

The CBI MLC Cables are built to last and priced to save you big money! An excellent Low-Z microphone cable, the CBI MLC offers high quality XLR male and female connectors and is compatible with any XLR connection-microphones, mixers, recorders. ..or anywhere else you need a high quality XLR connection.

• Product 1: Tripod boom microphone stand holds microphone securely in place (microphone clip sold separately)
• Product 1: Long boom arm with molded plastic counterweight for horizontal placement
• Product 1: Versatile design folds flat for use as straight mic stand
• Product 1: Sturdy steel construction; ultra-light for easy transport
• Product 2: Microphone cable for studio recording and live sound
• Product 2: High-quality XLR male and female connectors; 3-pin XLR male to XLR female
• Product 2: Protective metal housing; flexible PVC jacket with 6.0mm outer diameter
• Product 2: All copper conductors and inner copper spiral shielding; shielded cable reduces interference and excess noise

User questions & answers

Question:	Does It work with a shure sm7b? I bought a desk mic stand but the weight of the microphone pulls it down
Answer:	Only if it fits a standard mic clip[
Question:	Does it come with a carrying bag
Answer:	Assuming it can only be threaded one way just use a large/wide screwdriver or a perhaps a penny/quarter depending on the size of the slots.
Question:	What size is the thread
Answer:	ONly if it can be used with a standard mic clip
Question:	What is the tallest comfortable height this stand can get, measured from floor to clip
Answer:	Maybe, not sure. It looks like the bottom part may be a little short.

Product description

The Samson Q2U USB / XLR Microphone combines the convenience of digital and analog audio capture into one dynamic microphone. With XLR and USB outputs, the Q2U is the first choice for home/studio and mobile recording, as well as stage performance. The Q2U is simple to setup and outshines microphones that cost more than twice the price. It comes with a mic clip, desktop tripod stand with extension piece, windscreen, XLR cable and USB cable. . . A package with everything you need to start recording right out of the box.

• Best of both worlds: professional handheld dynamic microphone with USB digital output for connecting to a computer and XLR analog output for connecting to a mixer, audio interface or portable PA system
• Sound your best: dynamic microphone capsule with a cardioid pickup pattern captures sound from in front of the microphone and less from the side and rear, minimizing ambient sounds and other room noises for podcasting, home recording or voiceover work. It also reduces possible feedback in live performance settings
• Hear the mix: onboard 1/8" (3. 5mm) headphone jack allows for zero-latency monitoring, so you can hear yourself without any delay or echo, plus a mix of your computer audio playback. Solid, die-cast construction with heavy gauge mesh grille
• Start Recording: The Q2U is a plug-and-play device, meaning it doesn’t need any special drivers to work with your computer. Just connect the microphone to your computer, launch your favorite audio software, and start recording.
• It’s All in the Box: The Q2U Recording and Podcasting Pack includes everything you need to start recording great sounding projects: an extended desktop stand with mic clip that positions the microphone close to the sound source, a pop-filter for reducing p-pops, and USB and XLR cables.

User questions & answers

Question:	I have two questions: 1. would this microphone work well for recording audio books? 2. would it work w/ a macbook air laptop
Answer:	Yes that should work well with your audiobooks. As for the Mac laptop I don’t see why not it offers clear recordings for what I use it for.
Question:	I need something that is compatible with both a Mac and an iPhone/iPad. Will this work with either or both
Answer:	This is an old question but has yet to be answered completely so here goes. Yes, this microphone will work through USB with the macOS, Windows OS, most versions of Linux (that I know of), and will work with iOS (iPhone/iPad) devices that can use Apple's camera connection kit (30-pin or Lightning ports) as well as newer ones that use USB-C
Question:	How well does the microphone pick up a talking level voice from a short distance, say 2 feet
Answer:	Unfortunately no. This Is a Dynamic mike and it is designed for the speaker to be a few inches away 1-4 at best. What you really need is a Boom mike. If the point is to have people listen to you need the correct mike. For what you want this mike is not for you.
Question:	Would this microphone be a good fit for a multi host podcast? Each host having one of these mics
Answer:	this is not a omni direction mic where you put it in the middle and you can record everyone, this is a direct to your mouth, pointed right at your face mic (to put it in simplest terms.) if you want a multi host mic where you can set it on the table and everyone can talk "at it" then look for the Yeti mic. .

Product features

One Mic for Stage, Studio and On The Go.

Samson Q2U meets both your digital and analog audio reproduction needs in one convenient package, including the mic itself and all the accessories you need to start recording right out of the gate. The Q2U dynamic handheld microphone features both XLR and USB outputs, making it ideal for home/studio and mobile recording, as well as stage performance. The mic’s cardioid (unidirectional) pickup pattern, high-quality A/D converter with a 16-bit, 48kHz sampling rate and 50Hz–15kHz frequency response ensure that the audio captured on stage, in studio or on the go is clear, detailed and accurate. It's also compatible with most computer based digital audio workstations, so your recordings can be developed with enhanced control and functionality.

Easy To Use, Everywhere

Delivering high-quality audio effortlessly with minimal setup, the Q2U is an ideal choice whether you’re on stage, in the studio or on the go. It offers plug-and-play operation with no driver installation, and even works with iPhones and iPads via Apple's Lightning to USB Camera Adapter or Android devices via a Host OTG cable.

Go All Out

The Q2U can be connected directly to your computer or mobile device via it’s USB output, or plugged directly into a mixer or audio interface using the XLR output. It also features a 1/8" (3.5mm) headphone output for monitoring captured audio, as well as the audio from your computer.

All Accessories

In addition to the mic itself, the Q2U Recording and Podcasting Pack comes complete with everything you need to start recording, including a mic clip, desktop tripod stand, tripod stand extension, 2.25m USB cable and 3m XLR cable.

Product description

Description

The InnoGear Desktop Mic Stand is made of a solid construction and features a weighted 5.12” diameter base, which makes it a great mic stand for desktop or stage use.

It’s ideal for home recording, podcasts, broadcasts, and live interviews, as well as for live sound reinforcement for pianos.



Specification

Base material: iron

Base diameter: 130mm

Main rod diameter: 20mm

Minimum height: 27cm/10.6inch

Maximum height: 39cm/15.4inch



Package Included

1*Base

1*Adjustable-height shaft

1*Microphone clip

1*3/8" to 5/8" screw adapter



Note: Microphones are not included.

• Upgraded with metal base and affixed with 4 non-slip cottons, moving the desktop microphone stand without causing any noise and leaving any scratches on the table.
• Our base diameter is bigger and weight has been increased as heavy as 840g(1.85lb) so it won’t be knocked over very easily; the desktop microphone stand is adjustable from 10.6” to 15.4” height.
• Other's snap-in style stand may loosen after a long time, while our screw-in style stand is much more secure and tight, making sure the height stays on without sliding down.
• Package comes with an extra high quality metal 5/8" Male to 3/8" Female Screw for multi-purpose of use. It works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphone.
• The desktop microphone stand is easy to carry. Suitable for holding the microphone at the conference room, church and other public places.

User questions & answers

Question:	Will this work with the audio-technica atr2100-usb cardioid dynamic usb/xlr microphone? thanks
Answer:	It should work with any mic. I have a blue baby bottle mic I use with it. It can with an adapter so it should help
Question:	Will this work with my rode videomic go (3/8 thread hole
Answer:	No it doesn't.
Question:	Does the mic clip on this stand work well with the audio technica atr 2100 microphone
Answer:	I just want to clear things up, this is a 5/8 thread, I know it’s confusing when it says “3/8-5/8 adapter” but What they are saying is that you can get a male 3/8 - female 5/8 adapter thereby reducing the thread size
Question:	Will it work for the AT2020 condensor microphone
Answer:	Well, I just measured it and....with the stand fully extended and the boom vertical (parallel to the stand shaft) and also fully raised, the mic clip is just over 7 feet above the floor. Whether that is comfortable or not really depends on how heavy the mic or whatever you're going to put up there is.

Product features

InnoGear Adjustable Desktop Microphone Stand

Are you looking for the right desktop microphone stand to use? InnoGear desktop microphone stand is a solid pick for you which could be a great fit for professionals and beginners. It's height-adjustable between 10.6 to 15.4 inches, giving you a lot of control about the height.

The heavy metal base is to keep your mic secure and not easy to fall off. On the bottom of the base, it comes with four non-slip pieces of cotton in order to prevent your table from being scratched when moving.

Product description

The Stage performance kit combines the world's most legendary microphone with an XLR cable and robust mic stand to give you all you need for performing live.

• The complete set for on stage performers
• The Stage performance kit combines the world's most legendary microphone with an XLR cable and robust mic stand to give you all you need for performing live
• Perfect for Vocalists

User questions & answers

Question:	I apologize for my ignorance. Need for my church. Does this run on battery alone or does it have to be hooked up to something to work
Answer:	That is the microphone I am using it for - although, I used the adapter that came with the ATR2100 to attach the clip that came with the microphone. I replaced the clip that came with the stand because that clip was too small. It works fine.
Question:	How long is the cable that I can get with this mic
Answer:	I don't know much about this type of microphone, but I suggest that you email the seller and query with him on that matter.
Question:	What amplifier or mixer [ $20- $50 ] should i buy which is compatible with sm58 ? need suggestion
Answer:	I used the adapter that came with the microphone to connect it to the stand. This worked well. The clip on the stand itself was too small for this microphone.
Question:	Feel free to laugh a bit and excuse my ignorance. I am starting voice lessons does this microphone only work with a computer? Or can I hook it up to something different? Ok no more laughing. Thank You
Answer:	Yes. The AT2020 should come with a Stand mount for 5/8"-27 threaded stands. And our stand has a 3/8" female to 5/8" male screws.

Product features

Shure SM58

If you’ve ever heard someone sing or speak into a live microphone, there’s an excellent chance it was an SM58. Rock stars. Pop idols. Comedians. Presidents. Popes. Immortal words have passed through its iconic grille for generations. And with engineering and durability that set the world standard, it’s sure to keep turning up at legendary performances.

Polar Pattern (Example 1)

Polar Pattern (Example 2)

Frequency Response

Product description

Please Consider The following before you buy: Considering the product price, This is not a high-end product, so that you do not end up with high expectations, The quality is 'Just Ok'.

The product needs you to manually adjust the balancing of the microphone along with the stand tripods

In order to get the best results, the weight must fall under the Center Leg of the stand, this is the only way you can have a stable stand



The Maximum diameter of the mic SHOULD NOT EXCEED 1.73" , otherwise, you can't fit it in the stand.

* The POP Filter can be fixed with the goose-neck just like a screw.

* The Pictures taken are REAL in full size, the Microphones used are REAL too in full size. there was no manipulation or resizing of any of the photos.

* Can fit all types of tube-shaped Microphones.

* Please contact us if you are unclear about anything.



Note:

If you are not sure if it fits your mic, please contact us. NOTE:

This Stand will not support heavy Microphones, please buy the bigger stand if your mic is heavy.

If you are not sure about the mic size, please contact us before purchasing the item. we can tell you if it will be compatible or not. saving you the time and effort of returning the item.



Before you buy

Note this is a stand ONLY. it does not include the microphone.



Review the Product Video to see if you have a similar mic.



You can also check the larger size stand designed for bigger microphones and has more stability.

For any other problems or issues, please contact the seller.

Before you buy

1.Please make the necessary measurement to determine if your microphone can fit.

2. if you're mic is heavy (above 1lbs) please consider buying the large stand, as this one will hold. 3. If you are unsure that your microphone might fit or not, please contact us.

• Mini Tripod Desktop Stand for Microphones of Diameter 1.2" to 1.73" Heavy Duty
• 4" Long Goose-Neck with Double Nylon Net POP Filter to Eliminate Excessive Sound Noises.
• Including Rubber Bands to Hold and Fit your Mic into the Mic Holder.
• Adjustable Mic Holder Angle to get the Sound Directly into the Mic Capsule.
• IMPORTANT NOTE: THIS HOLDER IS FOR A MAXIMUM OF 1.73" DIAMETER MICROPHONES, IF YOUR MIC IS BIGGER, PLEASE SELECT THE BIG SIZE FROM THE OPTIONS ABOVE TO GET A BIGGER STAND.

User questions & answers

Question:	Can this fit the rode procaster broadcast dynamic vocal microphone
Answer:	It does not need a battery, but you do need to connect it to an amplifier that has a mic XLR connection. Mostly this would be a separate pre-amp which is then connected to a larger console or amplifier system, though some systems combines both.
Question:	Will this fit an mxl usb
Answer:	If the official Shure part number SM58-CN is selected, the "CN" means a 25' XLR microphone cable will be included. Other variants include SM58S which is microphone with an on/off switch, SM58-LC which is microphone only with no cable.
Question:	Will this work with a presonus audiobox studio mic
Answer:	While there are some modest guitar amplifiers in your price range, systems for amplifying vocals tend to be more expensive. You'd be looking for a "Public Address" or "PA" system, with some compact setups starting in the $100 range. Brands like Samson, Behringer, Alesis, and Roland have some models at the lower end of the price spectrum.
Question:	can this fit the nw
Answer:	I'd like to correct a statement that's been made about the SM-58, which is the most popular, universal "performer's mic," found in every band that can afford it and serving as the White House microphone for heads of state. It's a "dynamic" rather than a "condenser mic," which means it's durable, tough, long-lasting, made to take abuse. But it's not the preferred microphone in the recording studio, which is where the more sensitive, nuanced condenser microphone shines (but don't toss it in a bag and "take it on the road"). Condenser mics require more power than dynamic mics, and that power is called "phantom power," which is found in most mixing boards and in many amps--and in this handy adapter. But you do NOT require Phantom Power for an XLR connection: you require it for a CONDENSER MIC. And since the popular SM58 is a DYNAMIC MIC, the Phantom Power is wasted, a needless add-on. If you want to convert your XLR to USB (or to a phone plug), there are many adapters and cables for $10 that will do the trick You certainly don't need to invest a hundred in the pictured adapter--that's sheer "overkill. It's a bit of a mystery why sellers are showing the SM58 with a Phantom-Powered Adapter for condenser mics. You may be wasting $100 on one or the other of these incompatible devices.

• Designed with professional sound chipset.Hold high resolution sampling rate. Sampling rate: 192kHz/24bit!Excellent for singing, speech and Voice over.It has a wide frequency response from 30 hz to 16 khz, providing excellent sound for high-resolution audio.
• 3.5mm stereo headphone jack for zero-latency monitoring! Which allows you to monitor the microphone input in realtime. Good for home studio, Home Karaoke, Garageband, Skype, Discord, Yahoo Gaming, Singing, Chatting, Smule,
• Cardioid Polar Pattern: Cardioid polar pattern reduces pickup of sounds from the sides, improving isolation of desired sound source, which is ideal for podcasting, streaming, youtube video and recordings at home or professional studio
• It meets your use of recording interviews, singing recordings, and video conferencing.It is necessary----For YouTubers who need to make videos, record podcasts, dubbing, video commentary, singing, etc.
• Suitable for all operating systems：For all Laptop, PC and Mobile phones. No distortion, Strong output, Low power consumption.1x Condenser Microphone,1x Foam Microphone Cover,1x English manual instruction,3.5mm XLR cable,Pop Filter.

User questions & answers

Question:	Can it be used to pick up voices from a 8 - 10 person meeting
Answer:	I would believe so, I have only used it for myself alone
Question:	Does it come with a desk arm
Answer:	No
Question:	Could I use this with my stein berg interface
Answer:	Does it have na XLR jack?
Question:	Is this microphone suitable for notebooks and microphones
Answer:	Yes, both apply

• External Power Source Required: Note: Condenser microphones have active electronics that need an external power source. In order to function properly, you need to connect the TC20 to 48V phantom power, audio interface, mixer, or preamp. Designed for studio recording, home studio, podcasting, voice-over, streaming, YouTube video production, etc.
• Professional Sound: The upgraded mic capsule with low-noise FET preamplifier, high SPL handling, and wide dynamic range provides smooth, high-end clarity, warm and natural sound.
• Cardioid Pattern: TC20 adopts a cardioid polar pattern with excellent off-axis sound suppression capabilities to reduce the sound pickup from the side and rear and better eliminate background noise. Ideal for recording vocals and acoustic instruments.
• Upgraded T20 Boom Arm: T20 is made of durable steel and comes with a desk clamp with 4 times larger contact area for easily clip to any desk up to 2.4''/60mm thick, suitable for most mics weighing up to 4lbs/1.8k.
• What You Get: 1 x condenser microphone, 1 x T20 suspension stand, 1 x metal shock mount, 1 x pop filter, 1 x mic cover, 4 x cable tie, 1 x XLR cable (2m) and 1 x manual.

Product features

TONOR TC20 XLR Condenser Microphone Kit

Polar Pattern: Cardioid

Capsule Size: 16mm

Frequency Response: 20Hz-20KHz

Sensitivity: -45dB±3dB (0dB=1V/Pa, at 1KHz)

Output Impedance: 2.2KΩ

Max. SPL: 120dB

THD + N: <1%

S/N Ratio: 94dB

Product description

PLEASE NOTE:



1.The Stand is NOT Suitable for Blue Yeti USB Microphone.



2.Microphone and Pop Filter in the pictures NOT INCLUDED.



3.Shock Mount Diameter: 1.7"-2.0"/43mm-50mm.



Features:



Scissor Microphone Arm Stand with Built-in XLR Cable + Table Mounting Clamp:



*Max load: Approx 53oz / 1.5KG*



With one built-in XLR male to female microphone cable inside the boom arm tubing, enhances the scissor suspension microphone stand's overall appearance.



Double-braced arms add strength to stand much more weight.



Completely flexible, firmly attach the microphone anywhere.



Ideal for radio broadcasting studio, voice-over sound studio, stages, and TV stations, etc. YOU CAN NOT MISS IT!



Material: Metal



Shock Mount:



Isolate most studio condenser mics from physical vibration, floor, and stand noise.



Diameter: 1.7"-2.0"/43mm-50mm



Material: Metal



Package Contents:



1 x Scissor Microphone Arm Stand with Built-in XLR Male to Female Cable



1 x Shock Mount



1 x Table Mounting Clamp

• Note: Stand is NOT suitable for Blue Yeti USB microphone; microphone and pop filter in the pictures is NOT included
• Shock Mount Diameter: 1.7"-2.0"/43mm-50mm
• All-steel construction; sturdy and durable. Max load: Approx 53oz / 1.5KG
• Can be mounted on the announcers' table with the Table Mounting Clamp (included). Ideal for radio broadcasting studio, voice-over sound studio, etc.
• Note: The XLR male to female microphone cable is already installed hidden inside the boom arm tubing enhancing the scissor suspension microphone stand's overall appearance

User questions & answers

Question:	how wide is the diameter of the shock mount? i have blue yeti and i was wondering if it will fit or not
Answer:	Yes
Question:	will this hold the yeti pro
Answer:	Yes
Question:	Anyone explain how to fit a Blue Snowball onto this
Answer:	The official website of presonus list the: Audiobox USB width as 1.75" or 44.5mm: Will fit. M7 Microphone width as 2.13" or 44.5mm: Will not fit. So please check the model that you have is the USB one.
Question:	If the ShockMount Does not fit your mic can you connect your own shock mount to the boom arm
Answer:	Yes it does. you can check the video in this product page where such mic was used with this stand.

Product features

Neewer NW-35 Metal Suspension Boom Scissor Arm Stand with Built-in XLR Cable, Shock Mount and Table Mounting Clamp

Please note:

• 1.The Stand is NOT Suitable for Blue Yeti USB Microphone.
• 2.Microphone and Pop Filter in the pictures NOT INCLUDED.
• 3.Shock Mount Diameter: 1.7"-2.0"/43mm-50mm.
• 4.The XLR male to female microphone cable is already installed hidden inside the boom arm tubing enhancing the scissor suspension microphone stand's overall appearance.
• 5. Max Load Capacity: Approx 35oz / 1KG
• 6. Maximum Opening of Table Mounting Clamp: 2.1"/5.5cm. PLEASE VERIFY the thickness of your table before ordering.

Product description

Rode PSA 1 Swivel Mount Studio Microphone Boom Arm.

• Rotates 360 degrees with a maximum reach of 32.5 inches horizontally and 33 inches vertically
• 3/8 inch thread adaptor
• Holds up to 4.4 lbs
• Includes two desk mounting options
• 2-axis swivel mount for accurate positioning

User questions & answers

Question:	Will the Samson meteor mic fit on this? Thanks
Answer:	YES.. You will need an adapter for 3/8th to 5/8th. The stand has a 3/8th stud and the Meteor Mic has a 5/8th mounting hole on the bottom of the mic. So technically yes it will work and adapters of this type for mics are also easily purchased.
Question:	Will this work wiht my Audio-Technica 2100? Will I need an adaptor? If so, which one? Thanks
Answer:	It comes with everything you need to set it up. It fits my blue mics, so I'm sure they are pretty universal mic fittings. Hope this helps.
Question:	how does this mount to the desk
Answer:	It has a metal plate that attaches to the unit and then screws to the desk. See this picture http://beatstruggles.com/wp-content/uploads/2013/05/IMG_3510-1024x682.jpg and this one http://ecx.images-amazon.com/images/I/41B2ST8mIgL._SY300_.jpg
Question:	Planning on getting a Blue Yeti Shock Mount and was wondering if this was going to be able to support the weight
Answer:	As long as you don't exceed the 4.4 pound limit you should be fine. I use mine with a Studio Projects C1 with shock mount no problem, total weight about 2 lbs.

Product features

Rode PSA1

The PSA1 is a studio boom arm for radio, broadcast, studio and home use. The PSA1 offers a horizontal reach of 820mm, a vertical reach of 840mm and full 360 degree rotation. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert). Designed for the RØDE Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount. Please note that the PSM1 shock mount is sold separately.

From its humble beginning in the 1990s, RØDE Microphones has gone from strength to strength on the global stage and has become the go-to microphone for a variety of industries. RØDE employs the latest technology and precision machinery to continue to keep its products at world-class standards and at a great price.

PSA1 with No Attachments

PSA1 with RØDE PSM1 Shockmount

PSA1 with RØDE PSM1 Shockmount and RØDE Procaster Microphone

RØDE Broadcaster

RØDE Podcaster

RØDE Procaster

RØDE PSM1

Mounting via the Desk Clamp

Mounting via the Desk Insert

Diagram of PSA1 Components

Product description

PylePro Model : PDMICR42SLClassic Retro Vintage Microphone, SilverClassic Retro Dynamic Vocal Microphone, Vintage Style Vocal Mic with 16' ft. XLR Cable (Silver) Features: Classic & Iconic 'Old School' StyleBuilt-in Acoustic Pop FilterUltra-Wide Frequency ResponseHigh Signal Output for Voice ClarityInternal Cartridge Shock MountSelf-Tensioning Swivel MountRugged Construction & Steel Mesh GrillIntegrated Low Noise CircuitryON/OFF Switch for Stage ControlIncludes 16' ft. XLR CableUniversal Compatibility: Built-in Mic Stand AdapterPerfect for Stage Performances, Karaoke, RecordingTechnical Specs: Mic Element/Type: DynamicPickup/Polar Pattern: Uni-directionalMic Housing Construction Material: Molded ABSFrequency Response: 30Hz-15kHzSensitivity: -50dB (3dB @ 1kHz) Output Impedance: 600 Ohm (15%)Construction Material: PlasticDimension: 2. 2'' x 3. 1'' x 7. 4''Achieve quality sound performance and style with Pyle’s Classic Retro Microphones. The PDMICR42 vintage series dynamic mics will provide you with that old-school flavor along with today’s latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardiod polar patterns, impressive frequency response rates and more -- all to create an overall fantastic look and feel. The Pyle PDMICR42 Series Classic Retro and Vintage Microphones are sure to give you that sound and style you’ve been looking for.

• RETRO STYLE: Pyle Pro introduces a classic iconic retro style performance microphone and will surely add old fashioned elegance to on stage gig or in studio performances. Allows you to enjoy tomorrow’s sound performance w/ a classic and iconic touch
• BUILT IN POP FILTER: The professional classic dynamic vocal mica has a built in pop shield / screen that eliminate or reduce the popping sound caused by the mechanical impact of fast moving air giving you a more clear audio. Includes 16' ft. XLR cable
• VOICE CLARITY: The silver vintage microphone features a high signal output, integrated low noise circuitry, 30Hz-15kHz ultra wide frequency response, -50dB (3dB @ 1kHz) sensitivity, and 600 ohm output impedance to ensure a crystal clear audio
• UNIDIRECTIONAL: This unidirectional mica also features a cardioid heart shape pickup pattern that is most sensitive in the front and rejects sound from other direction making it perfect for live stage performances, karaoke, in studio recording
• ADJUSTABLE ANGLE: The built in universal mica stand adapter is compatible with almost all of today's mica stand in the market. It also has an internal cartridge shock and self tension swivel mount so you can fully adjust your mica forward or back

User questions & answers

Question:	can it be handheld
Answer:	Yes it can. The only bad thing about this mic is it is made of plastic. But over all it sounds great.
Question:	IS this made of cheap plastic that will strip easily
Answer:	We actually used ours for a music video but the quality of the microphone was great! I didn't see it as cheap at all, and not plastic!
Question:	What stand should i use or does it come with one
Answer:	It doesn't come with a stand, but you can use a regular stand
Question:	Can we plug the mic to a computer
Answer:	Yeah my brother has this paired with the focusrite solo, Which has a usb connector you put into your pc. You plug your xlr into it and con monitor it directly with gain, and it's good if you plan on upgrading from this mic in the future.

Product features

Classic Retro Dynamic Vocal Microphone

Achieve quality sound performance and style with Pyle's Classic Retro Microphones. The PDMICR42R vintage series dynamic mics will provide you with that old-school flavor along with today's latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardioid polar patterns, impressive frequency response rates and more - all to create an overall fantastic look and feel.

The Pyle PDMICR42R Series Classic Retro and Vintage Microphones are sure to give you that sound and style you've been looking for.

Technical Specifications:

Red: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.38 lbs.

Technical Specifications:

Silver: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.39 lbs.

Technical Specifications:

Black: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.4 lbs.