13 best neewer pop musics

Product description

*PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*

NOTE:

1.The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it.

When connected with desktop computer, the Microphone could be used alone;

When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).

3.The microphone can not be used with mobile phone and tablet computer. *NOTE: It cannot work with Mac.

4.If you want better sound effect, a sound card should be used.

5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.

NW-700 Condenser Microphone

Has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.

Low noise, wide dynamic range, high sensitivity output.

Material: Metal

NW-35 Scissor Arm Stand

*Max load: Approx 35oz/1KG*

Double-braced arms equipped with super-strong spring. Adjustable angle & height to show your perfect voice.

Material: Steel

Extend up to 31.5"/80cm.

Pop Filter

Metal Shock Mount

Ball-type Foam Cap

Table Mounting Clamp

3.5mm Male to XLR Female Cable:

Length: 8.2ft/2.5m

• The Set Includes: Condenser Microphone, Adjustable Suspension Scissor Arm Stand, Table Mounting Clamp, Metal Shock Mount, Pop Filter, Ball-type Anti-wind Foam Cap, 3.5mm Male to XLR Female Cable. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally; If you want better sound effect, a sound card should be used; Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)
• The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
• The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. *Max load: Approx 35oz / 1KG*
• The microphone wind screen pop filter shield can ensure that your tracks are audible and easy to understand.And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
• The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.The microphone can not be used with mobile phone and tablet computer. NOTE: It cannot work with Mac.

Product features

Neewer NW-700 Broadcasting Recording Condenser Microphone & Mic Scissor Arm Stand with Shock Mount and Table Mounting Clamp Kit

Please Note:

1. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally;
2. If you want better sound effect, a sound card should be used;
3. Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)

• The Set Includes: Condenser Microphone, Adjustable Suspension Scissor Arm Stand, Table Mounting Clamp, Metal Shock Mount, Pop Filter, Ball-type Anti-wind Foam Cap, 3.5mm Male to XLR Female Cable.
• Pro condenser microphone: Adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
• Adjustable scissor arm stand: Made out of all steel construction, sturdy and durable. Folding type, convenient to carry.
• Mic wind screen pop filter shield: Ensure that your tracks are audible and easy to understand. And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
• Metal shock mount: features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.

NW-35 Scissor Arm Stand

Adjustable angle & height to show your perfect voice.

Mic Pop Filter

Banish the dreaded hissing and lisping sounds.

XLR to 3.5mm Audio Cable

Suitable for most audio receive devices.

Anti-wind Foam Cap

Avoid slight ambient noise such as airflow.

Product description

Features: New generic Studio Microphone Mic Wind Screen Pop Filter Mask Shied Essential item for recording, speaking or singing. It will help to ensure that your tracks are audible and easy to understand. And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds that come when pronouncing the letter "s" and the explosion of air that follows "b" and "p" with this microphone pop screen. Double layer, convenient and easy use. Protects your microphone from surplus spit caused by over eager performers. 360° flexible gooseneck holder, convenient for use. Swivel mount for easy installation. Adjustable clamp fixes securely to any mic stand. Goose neck for precise positioning. It can also protect the microphone from the accumulation of saliva. Commonly used in a recording studio. Package contents: 1x Studio Microphone Mic Wind Screen Pop Filter Mask Shied

• DUAL-LAYER POP FILTER: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings
• ADJUSTABLE GOOSENECK: The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice
• CLERAER SOUND: Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P". It is a great item for singers, streamers and actors alike who want help achieving the best possible performance and help protect the spitting all over your personal microphone
• WIDE COMPATIBILITY: Adjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands. Eliminates anyone's extra elements that prevents them from recording/projecting their best vocals to the public or their audience
• EASY OPERATION: Swivel mount for easy installation, removal and location adjustment. Note: Microphone is NOT included.

User questions & answers

Question:	Does this work for the razer seirin
Answer:	This will only fit if you have mic stand for your snowball microphone.Because it will only connect to the stand not on the mic.
Question:	Is ithis one made of two layers of nylon? i bought a brand called dragonpad, it's made of 2 layers, i could still hear a lot of pops which sucks
Answer:	I have been told that it will work with a condenser microphone, by someone I trust, though my microphone was just ordered, so I have not yet tested it out. Blue Yeti is a condenser microphone, so it should not be a problem.
Question:	What is the diameter size? how many inches
Answer:	It does !! It works very well in those microphones. I recommend this filter mask . You can get it over price in different shops around the USA .
Question:	Would this fit to a blue snowball ice condenser microphone
Answer:	Yes

Product features

Neewer 6 inch Microphone Wind Pop Filter

• Protect your microphone from surplus spit caused by over eager performers. It can also protect the microphone from the accumulation of saliva.
• Double Layer: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, then it passes the second screen, the blast is easily contained to produce great quality recordings.
• You can adjust the angle and distance between the screen and the microphone to best meet your needs.

Broadcasting Studio

Personal/Home Studio

Recording & Production

Radio Station

Product description

Note:

1. The computer and phantom power adapter are not included

2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

Can be used in Mac without installing driver and Windows 2000/XP/7/8/10/Vista system;

Strong output, no distortion, low power consumption;

Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range

Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations.

NW-35 Arm Stand

Made of all metal construction, sturdy and durable

The adjustable arms can be fold up and easy for you to carry around

The mounting clamp can attach to tables, desks, shelves, counters, etc

Extend up to 27.56 inches/70 centimeters

USB Cable:

Length: 4 feet/1.5 meter

Installation Steps:

1.Install the stand clamp to table edge, tight it; Put the bottom part of the recording microphone stand into the hole of stand clamp, adjust its position, tight it.

2.Screw shock mount on the top part of recording microphone stand; Fix the microphone on the shock mount by pinching the clip of shock mount.

Package Contents:

1 x NW-7000 USB Condenser Microphone(Black)

1 x Adjustable Suspension Scissor Arm Stand and Mounting Clamp

1 x Pop Filter

1 x Shock Mount

1 x USB Cable(Blue)

1 x Ball-type Anti-wind Foam Cap

• KIT INCLUDES: NW-7000 USB Condenser Microphone(Black), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap
• NW-7000 USB CONDENSER MIC: Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source; Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations
• NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable; The adjustable arms can be fold up and easy for you to carry around; The mounting clamp can attach to tables, desks, shelves, counters, etc; Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
• METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises; The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit
• WIDE COMPATIBILITY: Can be used with Mac without installing driver and Windows 2000/XP/7/8/10/Vista system; Strong output, no distortion, low power consumption

Product features

Neewer USB Microphone for Windows and Mac with Suspension Scissor Arm Stand, Shock Mount, Pop Filter, USB Cable and Table Mounting Clamp Kit

Kit includes NW-7000 USB Condenser Microphone(Black), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap

The sensitivity of the side of the bidirectional microphone is extremely low which can reduce the sound of nearby instruments in multi-track recording

Please Note:

• 1. The computer and phantom power adapter are not included
• 2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with the desktop computer, the Microphone could be used alone; When connected with a laptop computer, please connect the laptop to an electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

• The microphone is compatible with most Laptop(Windows7 and above, Mac OSX 10.9 and above)
• Strong output, no distortion, low power consumption;
• Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with a smooth frequency response range
• Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings, and familiar situations.

Pop filter

Block the sound of blasting

Metal shock mount

Reduce noise caused by vibration

Mic windscreen foam cap

Protect the microphone

Scissor arm stand

The microphone can be fixed to a suitable position

Dubbing

Song recording

Online meeting

• Kit includes: Condenser Microphone + Metal Shock Mount + 3.5mm to XLR Audio Cable + Ball-type Foam Cap + Pop Filter + Scissor Arm Stand+XLR Female to XLR Male Cable + Table Mounting Clamp + 48V Phantom Power Supply + Adapter
• The NW-700 professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source
• NW-35 SUSPENSION STAND: made of all steel construction, sturdy and durable. *Max load: Approx 53oz / 1.5KG*. PlEASE NOTE: This Stand is NOT Suitable for Blue Yeti USB Microphone
• 48V Phantom Power Supply delivers reliable 48V power. Universal XLR input and output. On/off power switch and LED indicator. Comes with one adapter
• Shock Mount Diameter: 1.6"-1.8"/43mm-46mm. Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the size of your microphone and the thickness of table BEFORE ORDERING

User questions & answers

Question:	What kind of plug ins do i need on my laptop? And with this can i start making music the day it comes
Answer:	My guess is yes, but I'm not sure. works great. btw.
Question:	What do I need to do in order to make the mic compatible with a Mac
Answer:	not the same size. not sure whatelse is differ
Question:	What am i doing wrong? Ive checked all plugs, changed the input on the recording software, and still doesnt work
Answer:	Yes it is Stereo input and for stereo outputs to headphones. I'm very happy with the way it works volume control for each Headphone set.
Question:	Does it require a sound card
Answer:	No you can't directly. You will need a quarter inch adapter, preferably stereo and you are good to go. Works awesome by the way.

Product features

Neewer Professional Home Studio Condenser Microphone with Mini Scissor Arm Stand and 48V Phantom Power Supply Kit

Kit includes: Condenser Microphone + Metal Shock Mount + 3.5mm to XLR Audio Cable + Ball-type Foam Cap + Pop Filter + Scissor Arm Stand+XLR Female to XLR Male Cable + Table Mounting Clamp + 48V Phantom Power Supply + Power Adapter

1. Neewer Professional Condenser Microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.
2. Tailored for studios, recording studios, broadcasting stations, stage performances and computer in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors.
3. Perfect for Vocals, Musical Instruments, Broadcasting, Podcasting, Interviews, Voice Recording, Video Conference, Singing over Internet, Online Chatting such as Facebook, MSN, Skype, YY.
4. This plug and play microphone can directly connect to your smartphone or computer, so you don't need to download special drivers or tools.

NW-700 Professional Condenser Microphone

• Available for your computer and laptop. Gold-sputtered diaphragm for accurate sound reproduction. Low noise, wide dynamic range and high sensitivity output. Fashionable design. Noble and elegant appearance. Sturdy and durable.
• Perfect for studios recording, personal ententainment, youtube video, broadcasting stations, etc.
• Listen and share your singing, podcasting, broadcasting, tunes, stories and voiceover with others. Enjoy being an anchorman.

Warm Reminder:

1. The microphone CANNOT be used with Mobile Phone and Tablet Computer. *NOTE: It CANNOT work with Mac.

2. If you want better sound effect, a sound card should be used.

3. When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.

NW-35 Suspension Boom Scissor Arm Stand with Table Clamp

• Double-braced arms add strength to stand much more weight.
• The flexible arms allow you to adjust the suitable angle and height to show your perfect voice.
• Max. Load Capacity: 35.27 ounces/1 kilogram
• NOT Suitable for Blue Yeti USB Microphone
• Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the thickness of your table BEFORE ORDERING.

Microphone Wind Pop Filter Mask Shield

• Double Layer: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, then it passes the second screen, the blast is easily contained to produce great quality recordings.
• Protect your microphone from surplus spit caused by over eager performers. It can also protect the microphone from the accumulation of saliva.

Anti Vibration Microphone Shock Mount

• This professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.
• Feature an angle adjustment with locking knob.
• NOTE: Fits for mic of 1.6"-1.8"/43mm-46mm Diameter. PLEASE VERIFY your microphone size BEFORE ORDERING

48V Phantom Power Supply

• Delivers reliable 48V phantom power for condenser mics and transfer sound signal to sound card in a compact, durable, plastic housing.
• Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer.
• On/off power switch and LED indicator for ease of operation.
• One Power Adapter is included. Input Voltage: 110V

Product description

Note:

1. The mic stand (Max load: Approx 53oz / 1.5KG); NOT suitable for Blue Yeti USB Microphone;

2. Please verify the size of your microphone and the thickness of table before ordering (Shock Mount Diameter: 1.6"-1.8"/43mm-46mm; Table Mounting Clamp Maximum Opening: 1.7"/4.5cm);

3. The microphone cannot be used with mobile phone and tablet computer, such as Mac;

4. If you want better sound effect, a sound card should be used.

Description:

This kit is specially designed for stores, families, stages, studios, broadcasting and TV stations for sound recording.

Black NW-700 Microphone:

Use precision electronic circuit to eliminate the crossover distortion and harmonic distortion, so it can provide you with high sensitivity, low noise and wide dynamic range.

Body weight: 11oz/316g

Material: Metal

Black 48V Phantom Power Supply:

Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer.

Input Voltage: 110V

Material: Plastic Housing

Black Studio Monitor Headphones:

180-degree rotation earcup can meet everyone's special listening methods.

Two different cables with durable screw-on plug to keep good connection during working.

Cable Length: About 3 meters

Plug: 3.5mm and 6.35mm

Net Weight: About 11 ounces/310 grams

Package Contents:

1 x NW-700 Condenser Microphone (Black)

1 x Monitor Headphone(Black

1 x 48V Phantom Power (Black)

1 x NW-35 Microphone Scissor Arm Stand (Black)

1 x Microphone Shock Mount

1 x Ball-type Anti-wind Foam Cap

1 x Pop Filter

1 x Power Adapter

1 x XLR Male to Female XLR Cable

1 x 3.5MM to XLR Audio Cable

1 x Table Mounting Clamp

1 x 3 meters Straight Cable

1 x Coiled Cable

1 x 3.5 to 6.35mm Plug Adapter

• NOTE: 1.Shock Mount (Diameter:1.6"-1.8"/43mm-46mm),Table Mounting Clamp(Maximum Opening Width: 1.7 inches /4.5 centimeters). Please verify the size of your microphone and the thickness of table BEFORE ORDER; 2. The mic stand is NOT suitable for Blue Yeti USB Microphone; 3. The microphone cannot be used with mobile phone and tablet computer, Mac
• KIT INCLUDES: NW-700 Professional Condenser Microphone, 48V Phantom Power, Monitor Headphone with 3-meter Straight Cable and Coiled Cable, NW-35 Microphone Scissor Arm Stand, Table Mounting Clamp, Shock Mount, Ball-type Anti-wind Foam Cap, Mic Pop Filter, Power Adapter, 3.5mm to XLR Audio Cable, XLR Male to Female XLR Cable
• NW-700 CONDENSER MICROPHONE: Adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source
• STUDIO MONITOR HEADPHONES: Comes with 3 meters Straight Cable, 1.2-3 meters Coiled Cable, 1/4inch-6.35mm adapter, durable screw-on plug; circumaural design for excellent sound; 180 degree rotatable earcups are easy for single ear monitoring; Softly padded headband for your comfortable wearing
• 48V PHANTOM POWER SUPPLY AND MIC ARM: Delivers reliable 48V phantom power for condenser microphone and transfer sound signal to sound card. On/off power switch and LED indicator for easy operation; NW-35 Mic Arm Stand with sturdy iron construction and load capacity up to 53 ounces / 1.5 kilograms, adjustable design provide you a suitable angle to show voice

User questions & answers

Question:	Is this system compatible with an apple 13” macbook air
Answer:	It’s trash bro, save your money.
Question:	Does it work with a chromebook
Answer:	Yes
Question:	It is working with out sound card
Answer:	It's pretty straight forward, instructions are in the box.
Question:	I have an Acer Chromebook R11 with a 3.5 mm interface would this work for me
Answer:	It should work on a dell, I have it installed on an HP as well as a Lenovo. It's working great on both systems.

Product description

NOTE 1: The Microphone only works with the device that could provide enough power (Voltage Required: 5V).

NOTE 2: The microphone is compatible with most Laptop (Windows7 and above, Mac OSX 10.9 and above).

NOTE 3: Max. Table Mount Clamp Opening is 1.85 inches.

Description:

This Condenser Mic has been designed with professional sound chipset which picks up crystal clear audio.

NW-35 adjustable microphone scissor arm stand is made of quality metal frame.It can be rotated to various direction for largely meeting your requirement.

The Pop filter makes sure your message loud and clear, and banish the dreaded hissing and lisping sounds.

Anti-vibration shock mount can avoid the negative effects of constant movement and vibrations.

This headphone is elegant, lightweight and comfortable to wear.

Specifications:

192KHz/24Bit Condensor USB Microphone

Voltage Required: 5V USB

Polar Pattern: Cardioid

Microphone-core: Dia.16mm Condenser

USB Cable Length: 78.7 inches/200 centimeters

Sampling Rate: 192kHz/24bit

Sensitivity: 5.0mV (1V/Pa at 1KHz)

Frequency Response: 20Hz-20kHz

SNR: 98dB

Compatibility: WINDOWS7 and above, OSX 10.9 above

Color: Blue

Scissor Arm Stand

Max.capacity: 1 kilograms/ 2.2lbs

Each Arm Length: 14 inches/35 centimeters

Studio Monitor Headphones:

Operating Principle: Closed

Transducer Type: Dynamic

Loudhailer Diameter: 45mm

Sensitivity: 98+/-3 dB

Frequency Response: 10Hz-26kHz

Max Power: 1800mW

Rating Power: 300mW

Cable Length: 3 meters

Plug Diameter: 3.5mm+6.3mm

Net Weight: 10.9 ounces/ 310 grams

Package Contents:

1 x 192kHz/24Bit USB Condenser Microphone(Blue)

1 x Studio Monitor Headphones

1 x Male to Female Adapter

1 x Mic Windscreen Foam Cap

1 x Metal Shock Mount

1 x USB Cable

1 x Pop Filter

1 x Table Mounting Clamp

1 x Scissor Arm Stand

• PACKING LIST: USB Condenser Mic(Blue); Studio Monitor Headphones; Male to Female Adapter; NW-35 Suspension Boom Scissor Arm Stand; Metal Shock Mount; Mic Windscreen Foam Cap; Pop Filter; Table Mounting Clamp;USB-B to USB-A Cable. Compatible with most Laptop and PC (WINDOWS7 and above, OSX 10.9 above). Strong output, no distortion, low power consumption; NOTE: The Condenser Microphone only works with the device that could provide enough power (Voltage Required: 5V)
• PROFESSIONAL MIC: This Condenser Microphone has been designed with professional sound chipset, which makes the USB microphone hold high resolution sampling rate. SAMPLING RATE: 192kHz/24bit. Smooth, flat frequency response of 30Hz-16kHz: Extended frequency response is excellent for singing, speech and voice over. It also has USB 2.0 data port which is easy to connect with your computer and Linux operation system, and no need extra driver software or an external sound card
• 16mm ELECTRET CONDENSER TRANSDUCER & MAGNET RING: With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response. This professional condenser mic picks up crystal clear audio. The magnet ring on the USB microphone cable has a strong anti-interference function, which makes you have a better feel
• IMPRESSIVE SOUND QUALITY HEADPHONE: 45mm large-aperture driver with rare earth magnets and copper-clad aluminum wire voice coils to make sure safe and stable output; Circumaural design contours around the ears for excellent sound isolation. Super soft memory foam cushions and leather material simulate human skin texture, ensuring lasting comfort. 3 meters undetachable Cable, 3.5mm-6.35mm adapter with durable screw-on plug are included to meet your needs on PC, Cell Phones, TV, etc
• NW-35 BOOM ARM SET: With a pop filter and a mic windscreen foam cap, the condenser mic records your voice and the sound is crystal clear. The shock mount holds the microphone steady with damping function. Particularly good for video voiceovers; podcasts; YouTube video; skype conferences and so on. Each Arm Length: 14 inches/35 centimeters. Max.capacity of the boom arm stand: 1 kilograms/ 2.2lbs

Product features

Neewer USB Microphone Kit 192KHz/24Bit Plug&Play Cardioid Condenser (Blue) with Monitor Headphones, Foam Cap, Arm Stand and Shock Mount

• NOTE 1: The Microphone only works with the device that could provide enough power (Voltage Required: 5V).
• NOTE 2: The microphone is compatible with most Laptop (Windows7 and above, Mac OSX 10.9 and above).
• NOTE 3: Max. Table Mount Clamp Opening is 1.85 inches.

Description:

• Professional Microphone: Designed with professional chipset, this condenser microphone can hold high resolution sampling rate (Up to 192KHz/24Bit), accurately providing the most subtle, smooth response of voice.
• NW-35 Adjustable Microphone Scissor Arm Stand with Table Mount Clamp: It can be rotated to various direction for largely meeting your requirement. The double-braced arms with spring of this stand add strength. Soft Pad of table mounting clamp can protect your desk from scratches.
• The Pop Filter makes sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
• Anti-vibration Shock Mount can avoid the negative effects of constant movement and vibrations.
• This Headphone is elegant, lightweight and comfortable to wear.

Package Contents:

• 1 x 192kHz/24Bit USB Condenser Microphone(Blue); 1 x Studio Monitor Headphones; 1 x Male to Female Adapter; 1 x Mic Windscreen Foam Cap; 1 x Metal Shock Mount; 1 x USB Cable; 1 x Pop Filter; 1 x Table Mounting Clamp; 1 x Scissor Arm Stand

Specifications

192KHz/24Bit Condensor USB Microphone

• Voltage Required: 5V USB; Polar Pattern: Cardioid
• Microphone-core: Dia.16mm Condenser
• Sampling Rate: 192kHz/24bit; Sensitivity: 5.0mV (1V/Pa at 1KHz)
• Frequency Response: 20Hz-20kHz; SNR: 98dB
• Compatibility: WINDOWS7 and above, OSX 10.9 above
• Color: Blue; USB Cable Length: 78.7 inches/200 centimeters

Scissor Arm Stand

• Max.capacity: 1 kilograms/ 2.2lbs
• Each Arm Length: 14 inches/35 centimeters

Studio Monitor Headphones:

• Operating Principle: Closed; Transducer Type: Dynamic
• Loudhailer Diameter: 45mm; Sensitivity: 98+/-3 dB; Frequency Response: 10Hz-26kHz
• Max Power: 1800mW; Rating Power: 300mW
• Cable Length: 3 meters; Plug Diameter: 3.5mm+6.3mm; Net Weight: 10.9 ounces/ 310 grams

Product description

Note: The microphone and the tripod stand are not included

Description:

The Neewer condenser microphone windscreen is thick enough to curb harsh plosive "popping" sounds, and drastically reduce or even eliminate unwanted background noises. It will also keep your microphone protected from dust, spit, and other airborne hazards that can shorten the life of your mic.

Specifications:

Size: 2.36x1.57x2.75 in / 6x4x7cm

Color: Black

• Windscreen is designed to fit most of the condenser microphone. Size: 2.36x1.57x2.75 in / 6x4x7cm. Color: Black
• Improves the sound quality of your recordings by drastically cutting down on unwanted background noise
• Keeps your microphone safe from harmful dust and moisture
• Perfect for improving the quality of your podcasts, Youtube videos, gaming streams, and more
• Note: The microphone and the tripod stand are not included

Product description

Description:

The adjustable black microphone scissor arm stand is made of quality metal frame. It is sturdy and durable.

The XLR to XLR audio cable is made of copper that can eliminate the hum and noise. Polyethylene insulation of the XLR to XLR audio cable improves high frequency response.

The Pop filter is equipped with spring hose and swivel mount for easy installation.It can adjust height and angle automatically.

The Pop filter makes sure your message loud and clear, and banish the dreaded hissing and lisping sounds that come when pronouncing the letter "s" and the explosion of air that follows "b" and "p".

It is applicable on many occasions, such as audio, stages, broadcasting and families and etc.

Specifications:

Material of the microphone stand: Metal

Each Arm Length: 12.9 inches/33 centimeters

Material of the XLR to XLR audio cable: PVC + metal + copper

Outer Diameter of the XLR to XLR audio cable: 6.0mm/ 0.24 inches

Diameter of the pop filter: 15cm/ 5.9 inches

XLR Cable Length: 8.2 feet/2.5meters

Package Contents:

1 x Microphone Stand

1 x XLR to XLR Audio Cable

1 x Pop Filter

• KIT INCLUDES: Microphone Stand Suspension Boom Scissor Arm; Dual-layer Pop Filter; XLR to XLR Audio Cable; NOTE: Max. load capacity is about 1 KG; NOTE: It is NOT suitable for blue Yeti microphone and Mic holder is NOT Included in the package
• DURABLE ADJUSTABLE MIC STAND: The adjustable black microphone scissor arm stand (12.9inches each arm) is made of quality metal frame, sturdy and durable; Super-strong spring protects microphone from shaking, suddenly dropping and making noise; Comes with one table mounting clamp with protective layer of sponge and an adjustable positioning screw can easily clip to any desktop up to 1.9-inch/5 centimeters thick
• PREMIUM XLR CABLE: Copper material make the XLR to XLR audio cable be able to eliminate the hum and noise. Polyethylene insulation improves high frequency response
• EASY OPERATION: The Pop filter is equipped with spring hose and swivel mount for easy installation, removal and location adjustment. Automatically adjust height and angle
• DUAL-LAYER POP FILTER: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings and banish the dreaded hissing and lisping sounds that come when pronouncing the letter "s" and the explosion of air that follows "b" and "p"

Product description

NOTE 1. Shock Mount fits for mic of 43-46mm Diameter. Please verify your microphone size before ordering.

NOTE 2. ONLY Shock Mount and Pop Filter are Included. Mic Arm NOT Included.

Description:

Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm stand(NOT INCLUDED).

The pop filter has a metal gooseneck that can support its own weight. And the gooseneck is super-flexible and long enough to clamp to mic stand.

The shock mount fits microphone diameter ranging from 43mm to 46mm.

Double layer pop filter blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.

The pop filter is compatible with Blue Yeti and any other microphone.

The shock mount comes with a foam insert, which is used to hold and protect the microphone.

Pop filter-adjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands.

Shock mount-standard 5/8"-27 thread with a 3/8"-5/8"screw adapter, features an angle adjustment with locking knob, so you can mount it on all the standard microphone stands.

Ideal for radio broadcasting studio, voice-over sound studio, recording.

Specifications:

Shock Mount for mic type: Diameter of 43mm-46mm

Pop filter diameter: 6 inches

Pop filter inner diameter: 5.1 inches/13cm

Pop filter gooseneck length: 14.8 inches/ 37.5cm

Pop filter clamp affordable thickness: 1.6inches/ 4cm

Color: Black.

Material: Metal

Package Contents:

1x 45MM Microphone Shock Mount

1x 6-Inch Mic Wind Screen Pop Filter

• KIT INCLUDES: 45MM Microphone Shock Mount; 6-Inch Mic Wind Screen Pop Filter. Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm stand(NOT INCLUDED). NOTE: The shock mount only fits microphone diameter ranging from 43mm to 46mm. Please verify your microphone size before ordering
• CLERAER SOUND: The pop filter can banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P"; And the professional suspension shock mount isolates most studio condenser mics from physical vibration, floor and the stand noise
• ADJUSTABLE GOOSENECK AND DUAL-LAYER POP FILTER: The gooseneck holder fully supports the filter's weight and keeps it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs. Dual-layer pop filter push your voice to better quality-the first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained
• QUALITY MIC SHOCK MOUNT: Made of high-quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping design, which makes the microphone more convenient to install and prevents the microphone from falling
• WIDE COMPATIBILITY: Pop filter-adjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands; Shock mount-standard 5/8"-27 thread with a 3/8"-5/8"screw adapter, features an angle adjustment with locking knob, so you can mount it on all the standard microphone stands

Product description

NOTE 1. Shock Mount fits for microphones with 43-47mm Diameter. Please verify your microphone's diameter before ordering.

NOTE 2. ONLY a Shock Mount, a Pop Filter, and a 5/8" to 3/8" screw adapter are included. Mic Stand and Microphone are NOT Included.

Description:

The shock mount fits microphone with diameter ranging from 43mm to 47mm. It isolates most studio condenser mics from physical vibration, floor, and stand noise.

Three layers design pop filter. Double layer honeycomb metal mesh with high porosity and a high-quality sponge layer in the middle, which prevents the dreaded hissing and lisping sounds to make your sound perfect.

The shock mount comes with a foam insert, which is used to hold and protect the microphone from scratching and falling.

Ideal for radio broadcasting studio, voice-over sound studio, recording.

Compatible with Audio-technica AT2020, AT2020+, AT4033, AT4040, AT2050, AT2035; MXLOO6/006, OO7 ,OO8 ,V6, 550, V67, DRK, 2006, 3000; Nady SCM 2090/ 800/ 900/ 910/ 920, TCM 1000/1150; Blue Bluebird, BABY BOTTLE, Stage one, Spark, dragonfly; CAD GXL 3000, U37; Behringer B-2; AKG C 535 EB, C-24; Rode NT1, NT2; AK47, M16 MK II; BM700, BM800; RE20, etc.

Specifications:

Shock Mount Compatible with Microphone with a Diameter of 43mm-47mm

Pop Filter Inner Diameter: 2.8 inches/ 7 centimeters

Pop Filter Outer Diameter: 3.1 inches/ 8 centimeters

Pop Filter Compatible with Mic Stand with a Diameter of 5mm-20mm

Screw Adapter: 5/8" to 3/8"

Package Size: 4.9x4.7x4.3 inches / 12.5x12x11 centimeters

Package Weight: 7.76oz/220g

Package Contents:

1x Microphone Shock Mount

1x Pop Filter

1x 5/8" to 3/8" Mic Thread Screw Adapter

• KIT INCLUDES: Microphone Shock Mount; Pop Filter; 5/8" to 3/8" Screw Adapter; Combination with mic shock mount and pop filter, this set makes your broadcast or singing voice sounds more pleasant. Effectively reduces the vibrato caused by the vibration of the mic stand, and comprehensively protect the microphone from falling. NOTE: The shock mount only fits microphone's diameter ranging from 43mm to 47mm. Please verify your microphone size before ordering
• QUALITY MIC SHOCK MOUNT: Made of high-quality metal and high elasticity rope. The surface is coated with black matte paint, which is durable, anti-rust, and easy to clean. Added a 2mm soft foam pad to the microphone clamp to prevent the microphone from damaging and scratching. Screw with anti-slip stripe for easy installation and removal
• THREE-LAYER POP FILTER: Three layers design pop filter. Double layer honeycomb metal mesh with high porosity and a high-quality sponge layer in the middle. It can banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P"; The pop filter also can be used separately from the shock mount and be attached to your mic stand that with 0.5-2cm diameter
• USEFUL SCREW ADAPTER: A metal 5/8" male to 3/8" female Mic Thread Screw Adapter is included for helping the shock mount connect with most of the microphone stands. The shock mount features an angle adjustment with locking knob, helping you find the most suitable location for the recording
• WIDE COMPATIBILITY: Compatible with Audio-technica AT2020, AT2020+, AT4033, AT4040, AT2050, AT2035; MXLOO6/006, OO7 ,OO8 ,V6, 550, V67, DRK, 2006, 3000; Nady SCM 2090/ 800/ 900/ 910/ 920, TCM 1000/1150; Blue Bluebird, BABY BOTTLE, Stage one, Spark, dragonfly; CAD GXL 3000, U37; Behringer B-2; AKG C 535 EB, C-24; Rode NT1, NT2; AK47, M16 MK II; BM700, BM800; RE20 and more. Ideal for recording, singing, broadcasting, commentary, live broadcast, video shooting and other scenes

Product features

Neewer 43-47mm Adjustable Anti-vibration Microphone Shock Mount with Double Mesh Pop Filter and Screw Adapter for Diameter of 43-47mm Microphone

NOTE 1. Shock Mount fits for microphones with 43-47mm Diameter. Please verify your microphone's diameter before ordering.

NOTE 2. ONLY a Shock Mount, a Pop Filter, and a 5/8" to 3/8" screw adapter are included. Mic Stand and Microphone are NOT Included.

Microphone Shock Mount

• Made of high-quality metal and high elasticity rope. The surface is coated with black matte paint, durable, anti-rust, and easy to clean.
• Added a 2mm soft foam pad to the microphone clamp to prevent the microphone from damaging and scratching.

3-Layer Pop Filter

• Double layer honeycomb metal mesh with high porosity and a high-quality sponge layer in the middle.
• Can banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P".
• The pop filter also can be used separately from the shock mount and be attached to your mic stand that with 0.5-2cm diameter

Package Contents:

• 1x Microphone Shock Mount
• 1x Pop Filter
• 1x 5/8" to 3/8" Mic Thread Screw Adapter

Live streaming

Live broadcast

Recording

Product description

NOTE 1: The Condenser Microphone only works with the device that could provide enough power (Voltage Required: 5V).

NOTE 2: The micphone is compatible with most Laptop (Windows7 and above, Mac OSX 10.9 and above).

Description:

With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording, broadcasting, meeting and gaming etc.

Plug-and-Play, no need to install any driver or sound card; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations, wherever you need a mic to voice call from home or you need to record outdoors on your computer.

USB 2.0 date port which is easy to connect with your computer and Linux operation system with no drivers and external sound card required.

With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response.

Specifications:

Voltage Required: 5V USB

Polar Pattern: Cardioid

Microphone-core: Dia.16mm Condenser

USB Cable Length: 78.7 inches/200 centimeters

Sampling Rate: 192kHz/24bit

Sensitivity: 5.0mV(1V/Pa at 1KHz)

Frequency Response: 20Hz-20kHz

SNR: 98dB

Compatibility: WINDOWS7 and above, OSX 10.9 above

Package Contents:

1 x 192KHZ/24Bit USB Condenser Microphone (Blue)

1 x Mic Windscreen Foam Cap

1 x Metal Shock Mount

1 x USB Cable

• PACKING LIST: USB Condenser Mic + Metal Shock Mount + Mic Windscreen Foam Cap + USB Cable; NOTE: The Condenser Microphone only works with the device that could provide enough power (Voltage Required: 5V)
• PROFESSIONAL SOUND CHIPSET 192kHz/24bit: This Condenser Microphone has been designed with professional sound chipset, which makes the USB microphone hold high resolution sampling rate. SAMPLING RATE: 192kHz/24bit. Smooth, flat frequency response of 30Hz-16kHz: Extended frequency response is excellent for singing, speech and voice over. Performed perfectly in reproduces sound, high quality mic ensure your exquisite sound reproduces on the internet
• PLUG and PLAY: The microphone has USB 2.0 data port which is easy to connect with your computer and Linux operation system, and no need extra driver software or an external sound card. Double shielding USB cable reduces interference, minimizes background noise and isolates the main sound source; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations
• 16mm ELECTRET CONDENSER TRANSDUCER & MAGNET RING: With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response. This professional condenser mic picks up crystal clear audio. The magnet ring on the USB microphone cable has a strong anti-interference function, which makes you have a better feel
• COMPATIBILITY: For most Laptop and PC (WINDOWS7 and above, OSX 10.9 above). Strong output, no distortion, low power consumption

Product features

Neewer USB Microphone 192KHZ/24Bit Plug & Play Computer Cardioid Mic with Sound Chipset(Blue)

• Designed with professional chipset, this condenser microphone can hold high resolution sampling rate (Up to 192KHz/24Bit), accurately providing the most subtle, smooth response of voice.
• With 16mm electret condenser transducer, this USB microphone can give you a strong bass.
• With a good cardioid polar pickup pattern, it reduces pickup of sounds from the sides.
• Equipped with USB 2.0 Port for easier connecting with computer with no software or drivers needed.

Product description

Note: The phone and microphone in the pictures are not included

Description:

Microphone Suspension Boom Arm Stand:

Made of all steel construction, sturdy and durable.

The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height to show your perfect voice.

Folding type, convenient to carry.

Table Mounting Clamp:

Designed to securely mount your microphone stand to table top or other flat surface using an adjustable positioning screw.

Maximum Table Thickness: 2.4"/6cm

Pop Filter Shield:

Diameter:4"/10cm

Shock Mount:

Full 360-degree rotation for the perfect angle.

Microphone shock mount for less than 1.2"/36mm Diameter Condenser Mic

Phone Holder with Gooseneck:

Fit for phone width within 5.5"/14cm

Package Contents:

1 x Microphone Suspension Boom Arm Stand

1 x Table Mounting Clamp

1 x Pop Filter Shield

1 x Shock Mount

1 x Phone Holder and Gooseneck

• The adjustable arms allow you to adjust the suitable angle and height to show your perfect voice. Folding design, convenient to carry and space saving
• Steel base 2.4"/6cm table mounting clamp, can be mounted on the announcers' table securely, suitable for any stores, families, stages, studios, broadcasting and TV stations, etc
• The adjustable scissor arm stand is made of high quality steel frame, sturdy and durable
• Microphone shock mount for less than 1.2"/36mm Diameter Condenser Mic. The phone holder with flexible gooseneck can be easily adjusted to your needs, can hold the phone under 5.5"/14cm
• Note: The phone and microphone in the pictures are not included

User questions & answers

Question:	Is it possible to order a replacement pop filter for Style 2 that is on the 'straight' rod
Answer:	I can't be sure. It looks heavy for this mic arm. Also, there are some disparities between people's reports regarding the thread size on the units they have received. I got 3/8". I've heard some got 1/4-20. Nice thing is that Amazon has pretty lenient return policies (though returns of any kind can be a hassle). Sorry that I don't have more info.
Question:	Will it fit my audio technica atr
Answer:	I know an RE320 is a heavy mic but I have a substantial MXL144 with a big pop filter and it holds it up fine.
Question:	Will the fit the sennheiser e835 mic
Answer:	I ordered this to try on my blue yeti before purchasing a much more expensive one just for experiments. You can take out the thing that screws the adapter onto the arm. Then you screw that into your blue yeti. After doing that you can screw it onto the arm or you can do it either way around. But I am so happy I tried this boom stand first. It holds the weight of my blue yeti PLUS my audiophix (i think thats what my pop filter name is). I just tighten the elbow area not too much but just enough so I can still move it around and swivel it. Over all yes this does work with the blue yeti.
Question:	Can it fit a blue yeti
Answer:	There is an adapter on the original microphone clip that comes on the stand you unscrew the whole thing from the stand and then there will be a opening on the bottom with a slit. Put a quarter in it and twist it off, then twist the adapter on the stand and you can put your snowball on there. I am using the plastic one that came with the stand for my snowball and it works just fine. I saw that adapter while looking to purchase one so I'm glad I figured out there is one instead of wasting money. Hope this helps!

Product description

Note:

1. The computer and phantom power adapter are not included

2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone

Can be used in Mac without installing driver and Windows 2000/XP/7/8/10/Vista system;

Strong output, no distortion, low power consumption;

Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range

Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations.

NW-35 Arm Stand

Made of all metal construction, sturdy and durable

The adjustable arms can be fold up and easy for you to carry around

The mounting clamp can attach to tables, desks, shelves, counters, etc

Extend up to 27.56 inches/70 centimeters

USB Cable:

Length: 4 feet/1.5 meter

Installation Steps:

1.Install the stand clamp to table edge, tight it; Put the bottom part of the recording microphone stand into the hole of stand clamp, adjust its position, tight it.

2.Screw shock mount on the top part of recording microphone stand; Fix the microphone on the shock mount by pinching the clip of shock mount.

Package Contents:

1 x NW-7000 USB Condenser Microphone(Blue and Silver)

1 x Adjustable Suspension Scissor Arm Stand and Mounting Clamp

1 x Pop Filter

1 x Shock Mount

1 x USB Cable(Blue)

1 x Ball-type Anti-wind Foam Cap

• KIT INCLUDES: NW-7000 USB Condenser Microphone(Blue and Silver), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap
• NW-7000 USB CONDENSER MIC: Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source; Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations
• NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable; The adjustable arms can be fold up and easy for you to carry around; The mounting clamp can attach to tables, desks, shelves, counters, etc; Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
• METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises; The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit
• WIDE COMPATIBILITY: Can be used with Mac without installing driver and Windows 2000/XP/7/8/10/Vista system; Strong output, no distortion, low power consumption

Product features

Neewer USB Microphone for Windows and Mac with Suspension Scissor Arm Stand, Shock Mount, Pop Filter, USB Cable and Table Mounting Clamp Kit

Kit includes: NW-7000 USB Condenser Microphone(Blue), Adjustable Suspension Scissor Arm Stand and Mounting Clamp, Pop Filter, Black Shock Mount, USB Cable(Blue), Ball-type Anti-wind Foam Cap

The sensitivity of the side of the bidirectional microphone is extremely low which can reduce the sound of nearby instruments in multi-track recording

Please Note:

• 1. The computer and phantom power adapter are not included;
• 2. The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it; When connected with the desktop computer, the Microphone could be used alone; When connected with a laptop computer, please connect the laptop to the electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

NW-7000 USB Microphone (Blue)

• The microphone is compatible with most Laptop(Windows7 and above, Mac OSX 10.9 and above)
• Strong output, no distortion, low power consumption.
• Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source, highlighting the performance with smooth frequency response range.
• Plug-and-Play, no need to install any driver; Ideal choice for vocal, instruments, podcast, personal recordings, and familiar situations.

Pop filter

Block the sound of blasting

Metal shock mount

Reduce noise caused by vibration

Mic windscreen foam cap

Protect the microphone

Scissor arm stand

The microphone can be fixed to a suitable position

Dubbing

Song recording

Online meeting