13 best amp stands

Product description

Frameworks combo amp stand with rubberized leveling feet

• Tilt Back Design Accommodates Most Combo Guitar Amps
• Rubberized Leveling Foot
• Heavy Duty Steel Construction With Easy Adjustability
• 176Lb Weight Capacity (80 kg)
• Min/ Max Height: 5/20 Inches (127/508 mm)

User questions & answers

Question:	Will this stand work for a Fender Champion
Answer:	For all of those who have asked on Amazon.com about whether this or that particular amp stand will work for a Fender Champion 40, this Gator Frameworks Guitar Combo Amp Stand (GFW-GTR-AMP) is a perfect fit for the Fender Champion 40. It's almost as if this stand was designed for the Fender Champion 40. The stand is adequately wide enough to support the amp's dimensions and the back support bar completely clears both the on/off switch and the power cord at any angle position. This stand is very sturdy, stable, portable, and easy to set up. Although this amp stand works great as an at home amp stand, I primarily use it regularly for my Fender Champion 40 to play gigs. It gets the amp up off the floor and I can angle/position it as necessary.
Question:	I have a fender rumble 25 bass amp for practice. will it work with this stand? thanks
Answer:	Hello, We have not yet tested this combination, but based off dimensions found online they should be a fine pairing. If you would like to double check the dimensions of your amp to the dimensions of this stand, We have posted them below. Stand dimensions : 19.25" - Both horizontal bars 14-20" - Adjustable height. If you have any other questions, please feel free to ask us at [email protected]. Thanks!
Question:	It seems like the mid profile stand tips over easily. The low profile stand looks more stable but is it
Answer:	I use my stand to support an 8-space audio rack containing recording gear. It seems quite stable, even when I tip it to get access the connectors in back of the equipment.
Question:	Anyone know the width of the rear vertical bars from end to end and the actual bar width??? Thanks
Answer:	Vertical bars 11.5 from outside to outsideBar width end to end is 19.25In open locked position, as amp sits inside stand, from bottom of amp up to the cross bar is 11 inches.

Product features

Collapsible Design

The collapsible design allows you to quickly breakdown and store the amp stand even when space is limited. The Gator teeth locking mechanism locks it into place keeping it from re-expanding.

Tilt Back Design for Better Sound Projection

The tilt back design of this stand securely accommodates most combo guitar amps and keeps it at the perfect angle for accessing the amp and improved sound projection.

Gator Frameworks Guitar Combo Amp Stand; Adjustable Tilt Back Design (GFW-GTR-AMP)

The tilt-back combo amp stand separates your amp from the ground to help project sound to your audience and protect against spills or other hazards. Any guitarist knows the drag of having to bend over to adjust volume and tone knobs on ground-sitting amps, which is why the angled positioning of the stand allows you to easily access controls in a pinch. Rubberized feet help to isolate sound and keep your gear from sliding around on stage. Load up your favorite combo amp up to 176 lbs. and you’re ready to rock!

Product description

This professional-quality amp stand provides 5-position height adjustment and locking pins. No-slip rubber end caps keep this stand firmly in place. The support shelf is 12 inches wide and 12 inches high. Height is adjustable from 17 to 24 inches. For the studio or stage professional, On-Stage Stands recognizes the need for reliable professional quality support stands for expensive outboard gear, amplifiers and mixers. From the small project studio to the full-scale pro recording facility, On-Stage amp stands offer the the quality, reliability and ingenuity demanded by today’s industry professionals.

• Protect your amp by getting it off the floor
• A-frame construction for stability
• Padded support arms fold down for quick and easy storage
• Friction locking knob quickly and easily adjusts shelf height to five different positions
• Locking cross brace adds strength and support
• Single hinge allows legs to fold quickly and easily for storage and travel

User questions & answers

Question:	Would this hold a Fishman Loudbox Mini
Answer:	It should be fine. I use it with a Marshall DFX50, holds it nicely
Question:	Will it hold a boss katana
Answer:	Yes, but the upright support may hit the AC cord where it plugs into the amp. I had to cut about 3 inches off my proline stand which looks identical.
Question:	Would this be a good choice for a Vox AC
Answer:	Yup. Bought mine for an AC15HW1 and it works great. I've also had my Gibson GA40RVT on it with no issues. That ones about the size of your AC30.
Question:	What is the OD width of the amp brackets
Answer:	The OD width of the base/amp brackets is 14 1/4".

Product features

On-Stage RS7000 Tiltback Amp/Monitor Stand

Use this stand to protect your amp by getting it off the floor; A perfect choice for various stage and studio amplifier applications, the tiltback feature will rest your gear on black velveteen rubber pads for the best grip and direction of your sound. The A-frame construction makes this stand extremely secure and stable. Non-slip rubber feet and a locking cross brace keep the stand and amp firmly in place.

Product description

QL640 style upgraded amp stand - AMS-QL-640 still available while supplies last

• Securely holds small amps and combos with up to two 12-Inch speakers
• Full-circle tilt adjustable amp platform allows for exact amp positioning
• 5 height adjustment positions with spring-loaded locking pin

User questions & answers

Question:	I have two mesa wide body 1x12 speakers. Will the cross bar on the upper rack of this stand block the speaker jack which is ~5" from the bottom
Answer:	It shouldn’t block it. The top rack is versatile you can stand a medium size cab straight up or tilted and the arms retract so it can be flat also.
Question:	I have two amps one is 18h x 18w x 9d and the other is 16h x 18w x 10d. Will this stand work for me
Answer:	This stand isn’t for big amps it’s good for medium to small setups like a twelve or ten cabinet or a small combo amp.
Question:	Would this fit a vertical 2x12 cabinet? can you adjust the top portion to fit a mini peavey 6505mh 20w head? or does it only for large heads
Answer:	I believe the cabinet would have to sit horizontal. I do think a small 20 watt head would sit on their nicely. I use it with a black star 50 watt head and it fits great.
Question:	can this stand hold a 48 lb head and 11.81 high 2x12 cab
Answer:	Weight no problem height must be wrong on the cab.11.81 high on a 2x12 cab?I have used it for a 60 lb 4x10 combo.You may need to use both upper and lower segments

Product description

Foldable stand for guitar, bass, and keyboard combo amplifiers, with 100 lbs. Capacity, steel tube construction, and black powder coat finish.

• Tilts your amp back to direct sound where you can hear it
• Ideal for small amps and practice amps
• Steel box frame design provides a rock solid foundation
• Lightweight and folds flat for easy storage and transportation
• Locking tabs swing into place to keep the stand from opening during transportation
• Vibration resistant rubber feet eliminate unwanted effects on your sound

User questions & answers

Question:	Box says small amps will this hold a fender hot rod delux
Answer:	I use it for a Bugera V22 - 50lbs; it’s not as wide as the hot rod, but not really much smaller and weighs about the same. No problems with 50lb open back amp. Before that I had a Marshall AVT50 on it, so it’s been gigged pretty hard for over two years - no issues.
Question:	Will this block the conections on the back of my Fishman Loudbox Mini amp
Answer:	I run the power cord out the back and cables around the back as well. Even if it does this stand is great for small to medium combo amps. Just tweak your settings on your amp then set it up.
Question:	I have a mustang GT 200 amp will this stand work with the open back? is it wide enough to hold this position
Answer:	I use this stand for a Marshall AVT 50 and a Bugera V22 - both are about 45-50lbs each. The Bugera is open back and there is no problem. Both my amps are very close to same dimensions as the gt 200 but both of my amps significantly heavier than yours. I’ve been gigging with this stand for nearly two years and it has stood up just fine. It’s sturdy.
Question:	what size amp does it hold
Answer:	It holds a medium sized amp. Maybe a smaller Vox combo, Fender Blues Junior, my 1952 Gibson GA-20 (perfectly), possible a Fender Blues/Hotrod Deluxe. It does NOT work for a 4x10" combo amplifier. I hope this helps.

Product features

On-Stage RS4000 Folding Tiltback Amp Stand

The RS4000 tilts your amp back to direct sound where you can hear it! The steel box frame design provides a rock solid foundation and includes vibration dampening feet. Ideal for small amps and practice amps, the RS4000 is lightweight and folds flat for easy storage and transportation. Small locking tabs swing into place to keep the stand from opening during transportation.

Product description

Raise your amp off the stage and tilt back for improved monitoring and increased projection. Height adjustable design supports amplifiers up to 100 lbs.

• Raise your amp off the stage and tilt back for improved monitoring and increased projection
• Height adjustable design supports amplifiers up to 150 lbs.
• Foldable design for easy transport
• Steel construction for professional use
• Rubber feet minimize vibration

User questions & answers

Question:	Will this fit a small 15w Fender Pro Junior
Answer:	It should A Fender pro Junior is approx 15 inches wide the L shaped supports are 11.4 inches apart
Question:	Anyone know if my Fender M-80 Chorus combo amp will fit securely? open back: 24 1/2"w x 14 1/2"h ... Thanks Everyone
Answer:	Yes it will. I have a Roland KC-880 Stereo Keyboard Amplifier tilted on it and it works fine.
Question:	Will this hold the Fender rumble
Answer:	I have a prs sonzera 50 watt amp that says 56 pounds my old fender hot rod deluxe lll weighed less was what I had on her before, no problems, I turned the arms up side down for better sturdiness
Question:	Will this stand hold my fender 100 amp
Answer:	I am unsure I use it for my 100 amp crate

Product description

Raise your amp off the stage and tilt back for improved monitoring and increased projection. Height adjustable design supports amplifiers up to 100 lbs.

• Raise your amp off the stage and tilt back for improved monitoring and increased projection
• Height adjustable design supports amplifiers up to 100 lbs.
• Foldable design for easy transport
• Steel construction for professional use
• Rubber feet minimize vibration

User questions & answers

Question:	Is this stand ideal for a Champion
Answer:	It should be good. It is for smaller amps and the size of the Champion 40 should be good. I use it with a small Marshall combo.
Question:	Will this work with a fender mustang gt
Answer:	It might be a little small for the Mustang 100. These are sturdy little stands. I use mine for a Fender Super Champ and a Vibro Champ as well as a Marshall Valvestate AVT 20. I take these to little gigs and they work fine for what I use. I’m not sure the overall dimensions of the Mustang. Weight wise I’d say yes on the Mustang it would be ok. It just might be a little big for it though.
Question:	Anyone know the length of the upper back arms
Answer:	The shorter arm that your amp will set on are 4” in length. The tall arms that touch the back of the amp are 10 3/4” in length.
Question:	Could you indicate arms dimension (only arm height and depth)? Thanks
Answer:	very easy to put together

Product description

This pro stand features a fully-adjustable tilt angle for precision placement of a wide range of amps, monitors and speaker cabinets. The locking tilt mechanism features 48 teeth for the utmost in security. Its 1" square steel tubing is very strong and holds even large amps. Arms are 12" long, approximately 16" apart and fold down for compact transport. For nearly 20 years, The Music People! Inc. has been one of the nation’s leading suppliers of microphones and pro audio equipment. The Music People! Inc. also owns and manufactures On-Stage Stands® support stands. Founded on a promise of quality, innovation and customer service, The Music People! Inc. is committed to the needs of music professionals throughout the world.

• A double clutch disk that allows you to remove and rotate the support arm assembly offers strength and versatility
• The solid steel double stamped 3" disk allows for a secure locking position every time
• The A-Frame base with 1" square tubing construction will adjust its floor spread in order to get the most support under your amp
• A 17" base spread and non-slip rubber end caps acting as shock absorbers ensure maximum support
• The 11" support arms feature cushions to protect and grip your gear
• 2" knobs allow for maximum grip and torque when adjusting your stand

User questions & answers

Question:	What is the attachment that allows a power amp to sit on a tilted speaker cabinet
Answer:	I used a travel case with standard 19 inch and screw in your power amp/mixer etc. and put them on top of this stand
Question:	I have a 25 pound fender bassbreaker head/20 pound cab. cab = 19.5"w x 16.88"h x 9"d. will this support total weight of 45 lbs without being wobbly
Answer:	Yes. It’s very solid and over built. Extremely adjustable too.
Question:	Can this stand fold up so it flat for transport
Answer:	It folds up reasonably flat. Not completely flat.
Question:	Could any tell me the height of the back support arms and the distance between them? Looking for an amp stand for Fishman Artist Loudbox
Answer:	The height of the back support arms (floor to top of arms) is 36" and the distance between them is 14". I suspect you meant to ask for the verticle length of the back support arms and horizontal distance between them, which is 14" x 14".

Product features

On-Stage RS7705 Pro Tiltback Amplifier Stand

The strength and versatility of this stand comes from the double clutch disk that allows you to remove and rotate the support arm assembly. The solid steel double stamped 3" disk allows for a secure locking position every time! The A-Frame base with 1" square tubing construction will adjust its floor spread in order for you to get the most support under your amp. Ridged end caps keep all metal surfaces off the ground and act as a shock absorber.

Product description

Low profile stand for large guitar amps or combos

Width: 19 Inches

Folded height: 22 Inches

Weight capacity: 99 lbs.

Stand  is constructed from lightweight steel

Front to back depth range: 8 to 11 Inches

Front tier height range: 11 to 18 1/2 Inches

Back tier height range: 11 to 18 1/2 Inches

Stand weight: 7 lbs.

User questions & answers

Question:	Is it a good fit for the Roland JC
Answer:	This is a versatile, sturdy amp stand. I don't know the dimensions of that Roland JC-40 amp...however, even though I couldn't use this stand with my bass combo amps or cabs, I traded with our guitarist who uses this stand quite successfully with a variety of smaller (15-60 Watt, 1- or 2-speaker) amps. Hope this helps.
Question:	What is the height above the floor
Answer:	On mine, the front of the amp is about a foot off the ground. The rear is probably 7 inches from the floor. The angle is adjustable.
Question:	Will this asc hold my acoustic g20 (open back) amp
Answer:	Based on my experience, it depends how deep your amp cabinet is...for instance, this stand wouldn't accommodate my bass amps/cabs, but nicely fit our guitarist's amps/cabs. Hope this helps (somewhat).
Question:	Would a Fender Champion 40 fit on this stand
Answer:	I have a Peavey classic 50, 2x12 and it fits great. It's a well made stand for that price It's worth it!

Product description

Adjustable Steel Guitar Amplifier Floor Stand - Model #: SR02, Guitar Amplifier Stand, Adjustable Height, Angled Back, Locking Pins, Rubber Non Skid Feet, Straight back brace will not interfere with open back cabinets, One year warranty, Brand New. These heavy duty guitar amplifier stand has a black powdered-metal construction.  This adjustable guitar amp stand will accommodate most amps and will support up to 150 lbs.  These are ideal for getting your amp off the ground for easy listening and saving your back from having to bend over time and time again.

• Model Number: SRO2 - Guitar Amplifier Stand
• Adjustable Height
• Angled Back will not interfere with open back cabinets
• Locking Pins
• Rubber Non Skid Feet

• Floor stand for power amplifiers and other gear
• Steel bolt-together design creates a super strong and ultra rigid stand in minutes
• Includes innovative cone point feet and spikes for energy transfer and easy leveling
• Four steel support tubes feature scratch-resistant and resonance-resistant black sand powder coat
• Overall dimensions: 7.6" high, 24" wide, 18" deep.

User questions & answers

Question:	Has anyone put this on wheels or casters
Answer:	You can find brand Pangea roller casters at this url: https://www.audioadvisor.com/prodinfo.asp?number=PGVCAS
Question:	height dimensions
Answer:	Height as follows. From Bottom of Spike/Foot to bottom edge of shelf is 5 ¼ inches To the top of the shelf is 5 ⅞ inches
Question:	It’s too tall for my needs. Can the spikes be removed so the round bottom of the legs would contact the floor
Answer:	I don't understand what you mean by "its too tall for my needs". Its 5" off the floor! Yes the spikes can be removed that will bring it up 4" off the floor. Since you don't say how much is too tall, 4" may not work for you either!
Question:	How much weight can this amplifier stand accommodate
Answer:	I have a Manley Snapper sitting on it, which weighs a little over 40 pounds. Very stable, no issues.

Product features

Pangea Vulcan Amp Stand

Get your power amp up and off the floor with the Pangea Audio Vulcan Amp Stand and enjoy an elevation in overall performance. It provides solid support for power amps, monoblock amps, and other heavy gear at just the right height.

 

The Pangea Amp Stand also provides superior air circulation benefits compared to placing your amp directly on a carpeted floor. Also, you're less likely to bang up your amp with a vacuum cleaner, and it's less in the way of pets and feet, when you treat your amp to the Pangea Amp Stand.

Performance Enhancing Features

Smart Products with Strong American-Based Support

Product description

The RS7500 tilt back is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 4 tilt positions that allow for optimal sound. The fold-and-go RS7500 is perfect for the road and it even includes a 5/8 inch threaded end allowing musicians to add a mic or boom. Both the black velveteen rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings.

From the Manufacturer

Getting your amp off the floor and tilted improves tour mix. This new Tiltback is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7500 is perfect for the road and it even includes a 5/8" threaded end allowing musicians to add a mic or boom. Both the black velveteen rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings.

• Constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps
• Back leg adjusts to five pre-set locking positions to adjust the tiltback angle, allowing for optimal sound
• Features a fold-and-go design that is perfect for the road
• Includes a 5/8" threaded end allowing musicians to add a mic or boom.
• Black velveteen rubber amp holders and a sliding foam padded collar along the upper shaft protects the amp from scratches and dings
• Friction locking knob easily adjusts stand height
• Tripod base and non-slip rubber feet provides max stability for your equipment

User questions & answers

Question:	what is the maximum tilt angle
Answer:	the angle is about 25-30 degrees.
Question:	will a amp head and cabnet work wit hthis stand
Answer:	It depends on the amp and if the amp head attaches to the cabinet, as well I'm sure weight and overall size. I use mine for a Fender Deluxe Reverb and a Vibrolux Reverb amp. The stand is very sturdy.
Question:	Are there any cases or equipment bags that are well-suited to this stand
Answer:	I have a bag that I carry mic stands in. I just throw this amp stand in the same bag with the mic stands. It's just a large bag designed to carry several stands. On Stage SSB6500 Speaker And Mic Stand Bag: sells for abou $32.00.
Question:	What is the smallest length when it’s folded up? Trying to figure out if I could squeeze it into my 24” long pedal case
Answer:	It’s the one piece of equipment that is hard to tote to practice and gigs. But It’s invaluable. I think it should squeeze down to 24” but it will be tight.

Product features

On-Stage RS7500

This new Tiltback is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7500 is perfect for the road and it even includes a 5/8-inch threaded end allowing musicians to add a mic or boom. Both the black velveteen rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings.

Product description

The Monolith amplifier/component stand XL is a single shelf a/V stand for your home theater or entertainment System. Its satin finished shelf is large in size, sturdy and durable, while its open air design allows for maximum airflow and easy access to connections. Sturdy, tubular steel pillars provide incredible strength and rigidity to support even the heaviest of components, and an additional support bar can be utilized for extra and assured rigidity. The Monolith amplifier stand XL is the perfect way to organize and display your Monolith amplifier or other audio/video components.

• Sturdy construction: Four steel support tubes feature a scratch-resistant black powder coat finish. A rigid, thick MDF shelf has a finish that cleans easily and resists scratches and scuffs. This shelf can hold up to 200 lbs When securing the additional support bar underneath the shelf
• Open air design: the shelf is designed with open air shelving for critical airflow, cooling, and ease of access to your components. Unlike most enclosed AV cabinets, This sturdy design will ensure your equipment receives plenty of circulating air that will keep them from overheating during use
• Acoustically Inert: the stand comes with Spikes for decoupling it from room floor vibration and resonance. This stand can also be used without spikes to protect your hardwood floor surface
• Additional support bar: attach the provided support bar underneath for additional structural bracing for your heaviest components
• The perfect way to organize and display your AV components

User questions & answers

Question:	Can this amp stand be added on top of the 4 tier stand
Answer:	Yes it can
Question:	Does monolith 7 fits hete
Answer:	Yes the Monolith 7x200 fits on the stand
Question:	Would these be sufficient for raising a pair of RP-8000f off the floor? Specs look ok but would it be steady enough
Answer:	I believe it will It is very solid. I used mine for a fender blues deluxe guitar amp. I am a 300lb guy and I can stand on it and it doesn't give. (not recommended.) It does have a metal strap on the underside of the platform for extra strength. I hope this helps. GL.
Question:	The amp stand can be added on top of the 4 tier stand; however, how? Are additional bolts included to mate them together
Answer:	They are not made for stacking.

• ★ Short mic stand is perfect for bass drum, amp micing, or specialty use.
• ★ Adjustable boom for the perfect microphone positioning.
• ★ Reliable 5/8" metal threads for mounting standard mic clips.
• ★ Collapsible tripod base for compact and easy transport.
• ★ Includes 9.5" telescoping boom.

User questions & answers

Question:	How y’all can this reach fully extended from floor to top of the mic screw fully extended arm as well? Snare probs 3ft would be perfect
Answer:	Take yer screw top to the top of the floor fully reach snare 3ft extending from mic
Question:	Is the height adhustable
Answer:	Yes, the height is adjustable.
Question:	Is the boom removable?. I want to use this stand without the boom
Answer:	Yes, the boom unscrews, the same as most do on full-size stands.

Product features

Diverse Applications

The AxcessAbles MS-101L is great for a variety of uses, including interviews or speaking engagements.

Diverse Applications

A variety of uses comes with the AxcessAbles MS-101L! A musicians delight to say the least. It also enhances interviews or speaking engagements.

Diverse Applications

A variety of uses comes with the AxcessAbles MS-101L! A musicians delight to say the least. It also enhances interviews or speaking engagements.

Diverse Applications

A variety of uses comes with the AxcessAbles MS-101L! A musicians delight to say the least. It also enhances interviews or speaking engagements.

Height Adjustment

Microphone stand easily adjusts in height from 19.5" - 28".

Wide Radius

With a radius of close to 360°, the MS-101L lets you position your mic to optimize the sound source.

Tripod Design

Tripod stand base opens to 19.5" and non-slip rubberized end caps make for a super stable base.

Boom Arm Specs

Boom arm gives you another extra 9.5" of reach. You can also easily adjust the arm for balance and stability by simply loosening and tightening the screw knob on the bar.

Microphone Clip Tip

The boom arm has a 5/8" male adapter tip that is perfectly suited for standard microphone clips.

*Mic clip not included

Fold, Stow, and Transport

Super easy to fold. Requires the most minimum space for storage and is ultra-lightweight to carry around.