13 best 25 xlr cables

Product description

An Amazon Brand

• Microphone cable for studio recording and live sound
• High-quality XLR male and female connectors; 3-pin XLR male to XLR female
• Protective metal housing; flexible PVC jacket with 6.0mm outer diameter
• All copper conductors and inner copper spiral shielding; shielded cable reduces interference and excess noise
• Measures 25-feet long;

User questions & answers

Question:	are these as good as GLS
Answer:	I never used GLS but I know I'm very happy with these I haven't had any breakup or interference issues with home recording and they are very durable and insulated well, so far so good for recording guitar keyboard bass microphone vocals and drums so you should be ok with your purchase the quality and price is great.
Question:	Noob question will this work on a behringer u-phoria um2 and bm-800 mic? thanks
Answer:	This is a standard XLR cable. It will connect your mic to your input device. The mic requires "phantom voltage" to be supplied from the input device to the mic. Most Behringer devices will provide this, but double-check to be sure. Bon chance.
Question:	I have the bm 8000 excelvan along with the behringer um2. I got a xlr to aux that came with the mic to plug directly into my laptop. Will this work
Answer:	Should plug in just fine. But depending on your set up make sure the length is what you want. For streaming and recording gameplay or general use with discord, ts an so on its fine at 6ft legth. Just depends on your set up.
Question:	where do we get XLR pass through face plates
Answer:	https://www.amazon.com/gp/aw/d/B0002BG31C/ref=mp_s_a_1_1?ie=UTF8&qid=1524592792&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Pro+Co+WP1013+Dual+XLR+Female+Wall+Plate&dpPl=1&dpID=3132lqwMorL&ref=plSrch

Product features

3-Pin Connector

The XLR microphone cable's male to female connector with three pins and zinc alloy construction provides secure, uninterrupted audio feed.

Clean Sound

The cable's all-copper conductors and reinforced inner copper spiral shielding help prevent outside noise interference.

Reliable Strength

Built with a flexible 6.0mm PVC jacket and durable metal housing, the microphone cable offers dependable performance.

Plug and Play

The cable offers plug-and-play convenience with XLR-compatible PA systems or equipment.

Product description

Adding value to your purchase, Austin Bazaar bundles your instrument with necessary accessories. Everything you need to start playing immediately comes in one box. Save yourself the hassle and save some money while you're at it.



Gearlux cables have been designed and tested to provide you with years of dependable use. This Gearlux XLR Microphone Cable will get you plugged in and ready to be heard. Made from durable wire, these Gearlux cables are ready for the stage. Gearlux brand instrument accessories are perfect for musicians looking for quality gear at affordable prices. From stands and instrument cases to cables and piano benches, Gearlux has you covered.



Lifetime Warranty

Connector Type: XLR Balanced

Cable Length: 25ft.

Color: Black

• Guaranteed for Life
• Three-pin XLR connectors
• Professional OFC Noiseless Instrument Cable
• Ideal for Studio and Live Applications

User questions & answers

Question:	will these work for speaker wires when it says awg #23 when most speaker wires should be 12 to 14 guage
Answer:	I would not use these cables for speaker wiring. They are 23 gauge for flexibility, but intended only for microphone cables. In addition, they have 3-pin XLR connectors that are standard connectors for microphones, but not for speakers.
Question:	How does the "guaranteed for life" work
Answer:	And Anh N. Lam doesn't work like supposed to be either.
Question:	Where/What country are these made in
Answer:	China
Question:	This is a shielded/balanced cable. Can someone tell me if it is mono or stereo
Answer:	XLR cables are used for microphones or patching equipment together - they are mono they are balanced but the 3 pins do not represent that they are stereo.

• Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors
• Convenient and cost-effective 2-pack microphone cables provide spare or replacement XLR cables (XLR male to female cable) to use on a set of microphones or on different systems
• Balanced Mic cable with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound
• Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise; Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging
• The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port

User questions & answers

Question:	I'm wondering if these can compare to Monster brand cables because the price is really good but I am a little skeptical
Answer:	These are thick cables i was impressed when i got them
Question:	Does the cable have 3 wires for ground, positive and negative terminated at the 3-pin
Answer:	Yes. This is what is known as a balanced cable. As such, it has a ground conductor and two additional conductors that carry the signal. Hence, three wires total. This is standard for professional, low impedance microphones; and interconnections between pro audio equipment such as mixers and power amplifier's. BTW, these are very good, especially considering the price.
Question:	Why are they called microphone cables? Can I use them for pre-amp to power amp balanced audio interconnects
Answer:	These are XLR cables. Maybe they called them that because it the one of the most common uses for this type of cable. Either way - They will work to make a balanced connection between 2 pieces of equipment with balanced xlr in/out connections. I use mine to connect a pre amp to an Interface.
Question:	This is the price for two cables
Answer:	Yes. 2 cables. Used them this past weekend. Sturdy. Worked fine.

Product features

Pro Grade XLR Cable

The Cable Matters 3-Pin Male to Female XLR Microphone Cable is the sensible choice for interconnecting microphones, studio equipment, or stage lighting. This full-featured cable has a soft PVC jacket for easy use and storage; sturdy metal connectors with gold-plated contacts to reduce oxidation. The oxygen-free copper conductors are encased in copper braid shielding to provide pure sound that is noise free.

Feature-Filled Audio Cable

1) Gold-plated XLR pins

2) Strain relief on the connector

3) Sturdy metal connectors

Superior Construction

4) Oxygen-free copper

5) Individual wire insulation

6) Foil shielding

7) Copper braided shielding

8) Soft PVC jacket

XLR Compatible

Shotgun microphone

DMX lights

Stage speaker

Music mixer

Product description

25FT Mic cable with a 3pin male XLR plug on one end and a 3pin female XLR jack on the other end. This cable utilizes serviceable connectors that doesn't require any tools to access the internals of the connector thus making field repairs easy should the need arise. Quality balanced and shielded cable is professional grade EXTREMELY Flexible. This cable is not stiff like many cheaper units. Great for connecting microphones or other instruments to a PA, mixer or powered speaker.

• Ultra Flexible High Quality Professional Audio Wire
• Locking Male and Female XLR Connectors With Rubber Strain Relief
• Color: Black
• Length:25 Feet (7.6 Meters)
• Five Cables

User questions & answers

Question:	What is the wire gauge
Answer:	The gauge is not marked on the cable but I believe it's 14
Question:	Where are these made
Answer:	China
Question:	Can anyone report on longevity, I find the cheap ones die after 6 months of continual use while some of my good cables have lasted 10 years
Answer:	I bought this last year and the cables are flaking out now so lasted about 15 months, used twice a week every week, non-fixed. At about $6 a cable, not bad as long as you have plenty of backups.
Question:	Has anyone used these actual wire connected all of them together to get 100+ ft and any distortion or loss of sound
Answer:	I haven't gone 100 ft but I have hooked them up to about 65-75 with no loss of sound quality at all... also used them with phantom powered condenser mics. I've been very pleased with them so far.

Product description

6 PACK of Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-Grip and external rubber booty). As you can see in the above picture, the female locking end has a rubber grommet. This allows the cable to snap into place without being loose and sloppy like most other cables you may find. This 6 PACK comes with 6 different colors as shown.

• Heavy Duty Flexible Rubber Jacket in 6 Different Colors (25ft each)
• True Balanced Lo-Z Shielded Cable
• High Grade 21g Dual Copper Conductors
• Tri-Grip & Rubber Booty Strain Relief
• High Quality Noise Free Performance

User questions & answers

Question:	Are these high quality for recording vocals? Are these as good as Mogami
Answer:	I’m not sure how the Mogami’s are but I got these for live recording for the church and as of now they were of good quality.
Question:	What is the impedance of these 25ft cables in ohms? My preamp has adjustable impedance and I wanted to take cable impedance into account
Answer:	I am sorry - I don't know. I really like them though - no hiss and very clean sound.
Question:	What gauge are theses cables
Answer:	As the listing indicates, the size of the wires is 21 gauge. Most microphone cables on the market are 22 or even 24 gauge.
Question:	Do you have a pack with shorter cables? Preferably 5' to
Answer:	Hi Nathan,Thank you for your interest in our GLS Audio products.Yes, we have them available in 2ft, 3ft, 6ft, 12ft, 25ft, 50ft, and 100ft. Here are the links:http://www.amazon.com/dp/B000S91BI8/http://www.amazon.com/dp/B000RWJQRE/http://www.amazon.com/dp/B000RY68PA/http://www.amazon.com/dp/B000SMLJI2/http://www.amazon.com/dp/B000RKL8R2/http://www.amazon.com/dp/B000RLKOT4/http://www.amazon.com/dp/B000RLN7ZW/We also carry all the cables in black and in other versions such as XLR-F to 1/4" TRS, XLR-M to 1/4" TRS, XLR-F to 1/4" TS, XLR-M to 1/4" TS, 1/4" TRS to 1/4" TRS, 1/4" TS to 1/4" TS, and more.If you have any questions you may call us Toll Free at 800-897-8373.Best Regards,Bryan SundaGLS Audio

Product description

25FT Mic cable with a 3pin male XLR plug on one end and a 3pin female XLR jack on the other end. This cable uses serviceable connectors that doesn't require any tools to access the internals of the connector thus making field repairs easy should the need arise. Quality balanced and shielded cable is professional grade EXTREMELY Flexible. This cable is not stiff like many cheaper units. Great for connecting microphones or other instruments to a PA, mixer or powered speaker.

• Ultra Flexible High Quality Professional Audio Wire
• Locking Male and Female XLR Connectors With Rubber Strain Relief
• Color: Black
• Length:25 Feet (7.6 Meters)
• Ten Cables

User questions & answers

Question:	Are the connectors neutrik connectors? what awg are the cables
Answer:	No they are knock offs.
Question:	How long does it take to ship
Answer:	Fast shipping
Question:	Worth buying
Answer:	I've purchased two ten packs, and have only had two cables fail after a while of use and abuse. Some complain the connectors are too thick on the male end and can stick in stage boxes or mixers. It's not the case with all, and though sometimes snug, never an issue worth complaining about.

Product description

25FT Mic cable with a 3pin male XLR plug on one end and a 3pin female XLR jack on the other end. This cable utilizes serviceable connectors and doesn't require any tools to access the internals of the connector making field repairs easy. Quality balanced and shielded cable. Professional grade and EXTREMELY Flexible. This cable is not stiff like many cheaper units. Great for connecting microphones or other instruments to a PA, mixer or powered speaker.

• Ultra Flexible High Quality Professional Audio Wire
• Locking Male and Female XLR Connectors With Rubber Strain Relief
• Color: Black
• Length:25 Feet (7.6 Meters)
• Four 25ft Cables

User questions & answers

Question:	Do these cables use switchcraft connectors
Answer:	Yes
Question:	can these be used for lighting
Answer:	Technically, yes they can, as XLR cables were initially used for DMX transmissions; however in hindsight its worth noting that standard low noise XLRs are designed to transmit electrical (aka audio) voltages, while modern DMX cables are designed to transmit DMX protocol signals, or data. DMX cables are shielded, while XLRs are not. In short, while its possible to utilize standard XLRs for DMX transmissions, the data has a higher risk of being degraded and may cause one or more fixtures to operate erratically, sometimes even damaging the fixture worst case scenario. Audio signals, on the other hand can traverse through a DMX cable, without any issues.
Question:	Can you solder the connectors if they break loose? Are the covers removable
Answer:	Yes you can. I had to remove the heads to run the cables where I needed them to go. they work find.
Question:	Will this fit canon 5d mark iii
Answer:	that's a camera. these are mic cables.

Product description

Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-GripTM and external rubber booty). As you can see in the above picture, the female locking end has a rubber grommet. This allows the cable to snap into place without being loose and sloppy like most other cables you may find.

• Heavy Duty Flexible Rubber Jacket
• True Balanced Lo-Z Shielded Cable
• High Grade 21g Dual Copper Conductors & Shield
• Tri-Grip & Rubber Booty Strain Relief
• High Quality Noise Free Performance

User questions & answers

Question:	does this cable work with the audio technica 2020 and audio technica
Answer:	It will work with the 2021 and the standard 2020, but not the USB-model 2020.
Question:	could i hook these up to my PA speakers Great American DJ brand
Answer:	It all depends on whether your speakers have a correct input line for XLR cables.Most PA systems have XLR cable inputs. They are 3-pronged input in the shape of small circles.http://www.usa.canon.com/app/html/HDV/XLH1A/images/xlrs.jpg
Question:	What do these do
Answer:	These are used to connect a microphone to devices like snakes, mixers, or audio interfaces. They can also be used as an extension cable. I have 6 of them and 2 at 50 feet in length. I've used them for over 4 years in church service and in studio. No problems. Passes great clear sound.
Question:	How "noisy" or "clean" is this product and how does it compare to higher end cables
Answer:	I have been using two of these for about 3 years and they have no noise in them. I believe that you can purchase cables that may take more abuse and last longer. I set sound and use these about 40 times a year. They still work well.

• ➤ 【EASIER MATCHING & TRACKING】 - 10 different colors coding both connectors and cables, help you to track or match the right ends easily of audio mixer, DMX lights or microphones.
• ➤ 【EASY TO CLEAN】 - Comparing to the cable braided with nylon outside, this flexible durable cables with PE jacket imported with remarkable tenacity and elasticity, it is very easy to mop cleanly directly with wet cloth to get its bright color back.
• ➤ 【SUPPORT DATA & AUDIO SIGNAL TRANSPORTATION】 - 3-Pin balanced Lo-Z insulated shielded XLR cable (Oxygen Free Copper Shielding & Extra Foil Shielding) with 2-conductor, assure the transportation of both data and audio signal in a smooth way. Anti-interference, anti-EMI, Anti-cracking. 21 AWG, 110-120 OHM.
• ➤ 【DURABLE METAL ENDS】 - Strong indestructible metal connectors treats cable in a more carefree manner, avoid any ends broken.
• ➤ 【MORE CHOICE】 - Search "EBXYA" to get more cables of 1, 4 or 6 color packs with different sizes, and other adapter cables on amazon. ➤ 【MORE ATTENTION】 - Because of special period recently, if you choose order‘s shipping as "STANDARD", it'll take much longer days than your past normal orders to deliver. In order not to delay your plan, we suggest selecting "Expedite" to speed up your orders delivery in priority.

User questions & answers

Question:	Este producto son 6 piezas? tisino xlr cable de conexión de micrófono de 3 pines xlr macho a xlr hembra cable de micrófono
Answer:	6 Packs =6 Colors =6 Pieces
Question:	Are these 24 gauge wire
Answer:	Cables are not marked, but I believe they are 24 gauge
Question:	Does this cable have 2 or 3 wires
Answer:	Totally 3. Two signal wire and a ground wire which is outside the Aluminum foil as a shield against the outside interference.
Question:	Comparing to the previous cables I purchased from you, the new ones are more flexible and softer than before. Anything changed
Answer:	Dear Candace, thanks for your support EBXYA. Yes, we've upgraded our cables jacket material from PVC to PE since this Sep, which makes cable more flexible, and temperature tolerance range from -112℉ to -176℉（-80℃-80℃). Better material than PVC.

Product features

DESCRIPTION

This set is of EBXYA's C series XLR cables, which is of color colded both plugs and wire.

- Balanced XLR cable with dual shielded of Oxygen Free Copper (OFC) and Aluminium Foil, assure the XLR patch cable can be used as DMX cable, microphone cable, or mixture cable, or other stage instrument cable for your recording studio or live performance.

- NOISE FREE

MICROPHONE CABLE

STAGE DMX CABLE

AUDIO MIXER CABLE

• 【6N OFC Conductors】Our XLR cable use 100% 22AWG oxygen-free copper conductors, 98% copper braided, plug & play. Reliable interference-free audio transmission, provide both superior cable performance and reliable connectivity. No signal loss, no delay. HI-FI sound, no noise and high fidelity, no static / noise or burst / hum. An ideal XLR cable helps your instrument sounds flowing in a clear live nature way.
• 【Armour Alloy Metal Connector】Premium qualilty of alloy metal connector, it can provide a secure connection and increase durability. Gold Plated Contact Points for great signal connection. Temperature tolerance range -4℉-194℉.
• 【Heavy Duty PET Braided】BIFALE balanced xlr cable is made of triple shielded. Heavy Duty Hybrid PET Braided, tested plugging and unplugging for 5,000+ times. An-ti EMI/RFI. This microphone cable can withstand bend test of 10,000+ times without reducing cable flexibility and ensure the best performance possible. Using Cotton Yarn wrap features. Outer diameter is 0.256 inch(6.5mm).
• 【Wide Compatibility】Exclusive for your device. Compatible with equipments with 3-pin XLR connectors such as microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, stage lighting, etc.
• 【Lifetime Warranty】Free Lifetime Replacement or Money-back Guarantee if quality issue, please feel free to contact us via Amazon.➤Click Button "Contact seller"

User questions & answers

Question:	Weird question.. can anyone test and tell me if these glow red in uv light please
Answer:	yes,red color.
Question:	Is these XLR cables have 10 different colored
Answer:	Yes, our xlr cable have 10 different colors, pls select you need.
Question:	dose this work mixer to speaker input
Answer:	This cable should work great for a mixer to speaker input.
Question:	Will it work also for electric scooter charger 24V 6A
Answer:	Hi, our xlr cable don't support charge.

Product description

10 PACK of Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-Grip and external rubber booty). As you can see in the above picture, the female locking end has a rubber grommet. This allows the cable to snap into place without being loose and sloppy like most other cables you may find.

• Heavy Duty Flexible Rubber Jacket
• True Balanced Lo-Z Shielded Cable
• High Grade 21g Dual Copper Conductors & Shield
• Tri-Grip & Rubber Booty Strain Relief
• High Quality Noise Free Performance

User questions & answers

Question:	Anyone know if they use high silver content solder
Answer:	Not sure but I trust the solder joints and the conductivity of these cables like I trust my USA made speed controllers for my RC planes. I do a lot of soldering. Looking for zero loss always in cables ! 🥴
Question:	This is ten 25 foot cables
Answer:	Yes. Quantity 10x 25' XLR cables. Very nice quality. I've been using for a year and they're great.

Product description

These cables are 25ft mic cables with a 3pin male XLR plug on one end and a 3pin female XLR jack on the other end. This cable uses serviceable connectors that don't require any tools to access the internals of the connector thus making field repairs easy should the need arise. Quality balanced and shielded cable. Professional, Flexible and Durable Noise Free XLR Cable. In stock ready to ship.

• 10 cables
• Locking Male and Female XLR Connectors With Rubber Strain Relief
• Length: 25ft each

User questions & answers

Question:	what kind of shielding
Answer:	Copper Mesh
Question:	What is the gauge of the wire
Answer:	22 or 24 gauge pretty good size, work great, good value
Question:	Why brand connector is on these cables
Answer:	Couldn't tell you, but the mic end connects very smoothly and solidly, and the board end is a very tight connection. It's not terribly hard to plug in, but it certainly will not come out by accident. I've also not use any issue with noise or interference with any of them, and they're all running to mics and then through a snake. Very happy with them.

Product description

LyxPro LCP Quad Series cables are ideal for a wide variety of applications including professional recording studios, live performance, schools, churches, bands and any other professional audio setups.





LyxPro LCP Quad Series Microphone cables have 4-conductors to prevent wiring and grounding issues as well as RFI interference difficulties. Guaranteed, you’ll find their superior signal to noise ratio much greater than standard microphone cables. LyxPro Cables deliver superior sound that has been proven effective for canceling out noise. Each cable is constructed of 24 AWG Oxygen-Free Copper (OFC), 98% braided shield and gold-plated contacts on the connectors for rejecting EM and RF interference. As always, backed by our 5 year warranty.





Specs:

4 Conductor Cable

98% Braided Shield

24-Gauge OFC Conductors

Cotton Yarn Wrap for reducing noise

Cable strain relief & Gold Plated Connectors

RoHS Compliant

5 Year Warranty

• High-end star quad cable features greater signal to noise ratio, resolves many noise and interference issues like humming, electrical ground noise, RFI/EMI interference
• 4-Conducter Cable and Cotton Yarn wrap features noise reduction
• Cable strain relief keeps the cable tightly in place with the connectors
• Metal Connectors keeps them durable & Gold Plated Contact Points for great signal connection
• 5 year complimentary warranty

User questions & answers

Question:	Will the single be weak since i am going a 100 feet for a powered speaker
Answer:	No, I have found these to be excellent cables for sending a board-level signal to a set of remote powered speakers.
Question:	Will the single be weak since i am going a 100 feet for a powered speaker
Answer:	I'm assuming you mean 'signal' being weak but providing a 50 mV signal should not be a problem for top quality components with an adequate noise floor(and well soldered connectors)
Question:	Can you recommend using this cable going from a soundboard xlr output to a xlr mic input on a camera
Answer:	If the XLR output impedance or your soundboard is the same as the XLR input impedance of your mic input, then it should work just fine. Check your equipment specs for those impedance values.
Question:	Can someone confirm that the right angle female end is long enough to meet the mic when mounted to a mic clip? Doesn't seem long enough in the picture
Answer:	if positioned correctly yes