13 best seismic audio dj speaker pairs

Product description

Pair of Professional 15" Speaker MainsModel #: SA-15T (Set of 2). 15" Woofer. 350 Watts RMS; 700 Watts Peak per cabinet. Woofer has 50 ounce magnet and 2.5" kapton voice coil. 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat. Two 1/4" inputs and two Speakon inputs. Frequency Response: 45Hz to 20kHz. Crossover: 12/18db per octave 3K hz high power with dual glass bulb tweeter protection. Impedance: 8 Ohms. Sensitivity: 96 db. Dual ports. Full metal grill. Recessed Handles. Black carpeted covering with black metal corners. LxWxD: 25"x20"x16". Weight:  52 lbs per cabinet. Condition: New. One Year WarrantyThis listing is for a pair of these 15" speaker cabinets.  You will receive two identical speaker cabinets, pictured and described above.  Each speaker cabinet has the specs above.These amazing 15 inch Speaker Cabinets deliver every sound loud and clear with a 15 inch woofer, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 350 watts RMS, 700 watts peak power per cabinet. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! Great quality mains are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of 15" Speaker Cabinets pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Woofer - 15" 2 way w/ 50oz magnet & a 2.5" kapton voice coil.  350 Watts RMS – 700 Peak
• 8 ohms 45Hz –20KHz Sensitivity: 96 db Tweeter: 1.5" Titanium driver 10z. magnet & 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
• 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
• Input terminal has two 1/4" & two Speakon inputs. 1.5" stand mount. 29" T - 19" W - 15" D

User questions & answers

Question:	do i need a amp to hook these babies up to my home stero
Answer:	Hi, This may be a Yes and No answer. Your home stereo may already have some AMPLIFIED outputs, usually seen in the form of Red and Black binding posts or push lock terminals for raw speaker wire, to power some PASSIVE speakers. Usually the speakers for home stereo or home audio surround sound receivers are much smaller "bookshelf" style speakers, which typically require less wattage to "drive" or "power" than something like these full size Seismic Audio SA-15T. Each one of these SA-15T cabinets is rated at 350W RMS at 8 Ohm. Ideally your home stereo's AMPLIFIED output would be around 1.5 times this rating, or 350W RMS * 1.5 = 525W RMS at 8 Ohm. If your home stereo is rated around this 525W RMS at 8 Ohm per channel, then you are good to go. If not, you may want to look into going with a separate power amplifier for these SA-15T, something like our MBG-4000, which you can find on Amazon here: https://www.amazon.com/Seismic-Audio-MBG-4000-Power-Amplifier/dp/B007W4VN1M/ref=sr_1_1?ie=UTF8&qid=1520266248&sr=8-1&keywords=mbg-4000 If you go this route, you will need to find some line-level output from your home stereo, something like the RCA red and white female jacks or an 1/8" headphone or "Auxiliary" output. This would need to be an OUTPUT not an input. This output would allow you to send the line-level signal from the home stereo into the MBG-4000 amp, so it can amplify this signal to speaker level, and send on to the SA-15T. If you go the route of a separate amp, you will need the line-level cable to get out of the home stereo and into the MBG-4000 amp, and the "speaker cables" to output from the amp and connect to the SA-15T speakers. You can email us directly at [email protected] if you have any questions. Thanks, Rusty
Question:	How are these speakers powered? D cord
Answer:	These are passive speakers. They can accept Speakon or 1/4" speaker cables.
Question:	My amp says use 6-16 ohm speakers. does that mean 6 speakers at 16 ohms or 6 through 16 ohm. these speakers are 8 ohm. do i have an option? sean b
Answer:	Hi Sean, This 6-16 Ohm on your amp/receiver is indicating the impedance of the speakers you may connect to each channel. You are typically more interested in the lower number, this 6 Ohm, as this is the LOWEST STABLE IMPEDANCE for these output channels of your receiver. With impedance, the lower the number, the more work is being done. This amp is telling you that it can go down to 6 Ohm, but no lower. Should you connect a lower impedance speaker, or chain of speakers, then the output channel of the amp will fry. Since these SA-15T are rated at 8 Ohm, your amp can support one per channel, at least in terms of the impedance. You must also consider the wattage output of your amp, at this impedance of 8 Ohm. These SA-15T are rated at 350W RMS at 8 Ohm. You would want to at least match this wattage rating, with the ideal wattage rating being around 1.5 times the wattage of the speakers, or 350 * 1.5 = 525W RMS at 8 Ohm. This would be the ideal power rating for the amplifier you are using to drive these SA-15T. If your amplifier is rated lower in terms of wattage than this 350W RMS at 8 Ohm, then you will be underpowering these SA-15T and this could lead to poor performance from the speaker, when it is not the fault of the speaker. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	How to i hook up this pair of speakers to a europower PMP 4000 mixer
Answer:	Hi, You should be able to use Speakon cables to connect from the powered outputs of your Behringer PMP4000 to one of the Speakon input jacks on each speaker. You can check out our 25 foot Speakon cables, product code TW12S25 here: TW12S25Pair: https://www.amazon.com/Seismic-Audio-TW12S25Pair-25-Feet-Speakon/dp/B004HKMROQ/ref=sr_1_1?ie=UTF8&qid=1503070124&sr=8-1&keywords=tw12s25pair Thanks, Rusty

Product features

Description

Pair of Professional 15" Speaker Mains

• Model #: SA-15T (Set of 2)
• 15" Woofer in each Cabinet
• 350 Watts RMS; 700 Watts Peak per cabinet
• Frequency Response: 45Hz to 20kHz
• 3K hz high power with dual glass bulb tweeter protection
• Impedance: 8 Ohms
• Sensitivity: 96 db

Features

• Crossover: 12/18db per octave
• Woofer has 50 ounce magnet and 2.5" kapton voice coil
• 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat
• Two 1/4" inputs and two Speakon inputs
• Dual ports

Specifications

• Full metal grill
• Recessed Handles
• Black carpeted covering with black metal corners
• LxWxD: 25"x20"x16"
• Weight: 52 lbs per cabinet
• Condition: New

• Woofer - 12" 2 way w/ 40oz magnet & a 2” kapton voice coil.  300 Watts RMS – 600 Peak.  8 ohms
• 45Hz –20KHz.  Sensitivity: 96 db.  Tweeter: 1.5" Titanium driver w/ 10oz. magnet and 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection.  Metal Grill
• 25” T – 16” W – 14” D. 5/8 plywood front panel. Black carpet & metal corners. Recessed handles.
• Input terminal w/ two 1/4" inputs & two speakon inputs. Dual ports. 1.5” speaker stand mount.

User questions & answers

Question:	What do you connect them to
Answer:	Hi Margaret, Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! These SA-12T speakers are PASSIVE and must be connected to a power amplifier or to a powered mixer (mixer with power amp built in for speakers). These SA-12T are rated at 300W RMS at 8 Ohm per cabinet. You would need a 2 channel amp that matches this wattage and impedance rating per channel. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	What do you connect the monitor to
Answer:	Hi Margaret, Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! These SA-12T speakers are PASSIVE and must be connected to a power amplifier or to a powered mixer (mixer with power amp built in for speakers). These SA-12T are rated at 300W RMS at 8 Ohm per cabinet. You would need a 2 channel amp that matches this wattage and impedance rating per channel. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

Product features

Seismic Audio Pair of 12-Inch Speaker Cabs

Great for studio or live performances. Whether you have a permanent installation or mobile, this pair of is rugged enough to handle whatever you throw at it - road ready and built to last. The quality of your sound can only be as good as your equipment and these DJ speaker cabinets should not be overlooked. Each cabinet contains one 12" speaker with a 40 oz. magnet and 2-inch kapton voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each cabinet is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners. These features along with the recessed handles and full metal grill make these cabinets fit right in with your other professional equipment on stage. Awesome quality dual speaker cabinets are very hard to find, especially when low on cash. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. With your purchase, you will receive a pair of dual 10" speaker cabinets pictured and described above. So, grab one today and get ready for years of trouble-free, crystal clear sound!

SA-12T

This listing is for a pair of 12" passive speaker cabinets. You will receive two identical speaker cabinets, pictured and described above. Our SA-12Ts are well-suited for use for DJs, as mains, for PA use, keyboards, vocals, studio monitors, and other applications like gigs, weddings and churches, and sound & studio monitors. Well-suited for a full PA system.

Jack Plate & Inputs

Our SA-12Ts are outfitted with heavy-duty jack plates that house two 1/4" inputs as well as two speakon inputs. This feature enables this speaker cabinet to be easily daisy-chained and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Protective Hardware

Heavy-duty, rugged hardware protect our SA-12T cabinets with a fully metal grille on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

In order to transport your speaker cabinets easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

• Model - SA-15.2  (Set of 2)
• Woofer -15" and each has a 50oz magnet with a 2” voice coil.  300 Watts RMS -600 Watts Peak
• Wired at 8 ohms.  45Hz –20KHz.  Sensitivity: 96 db.  2x5 Tweeter  5/8 plywood front panel
• Steel grill over speaker.  Side Handle.  Terminal cup with two 1/4" inputs.  Can be Daisy Chained
• Mount cup for speaker stands.  One port.  19” tall -16” wide -12” deep

User questions & answers

Question:	What would be an appropriate amplifier to run a pair of these
Answer:	at least 800 watts rms
Question:	are the speakers powerd and can i chain link them with my berhingers
Answer:	Hello Mark, the speakers are passive not powered. I am not sure what your berhingers are so I may not address that part of your question. If you mean set the speakers up in a series, I do not see why not.
Question:	can you play a bass guitar through the speakers and will it handle in bass
Answer:	Hi, You can not connect your bass directly to these SA-15.2 as they are passive 15" loudspeakers. You can connect your bass to a preamp (or bass guitar amp head), to amplify the signal from your bass, then output from the amp and connect to these SA-15.2. Each SA-15.2 is rated at 300W RMS at 8 Ohm. If you "daisy chain" these two speakers together, you will create a 600W RMS at 4 Ohm load. You would need to make sure your amp could support this wattage (600W RMS) at this impedance (4 Ohm). You would also need to use low gauge (12-16 AWG) speaker cable. Each SA-15.2 has a dual 1/4" jackplate, where either jack can be the input, then once the input is connected, the other jack becomes an output for daisy chaining purposes. As far as the level of bass you will get from these SA-15.2, it will certainly be bass you can hear, but these are not subwoofers, so it will not be bass you feel. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	Is it easy to be operated? I hope it will be not too hard to do that
Answer:	…Were very easy to set up, and I just connected to the amplifier and then to the record player.…You can buy this amplifier if you are a lack of it. https://www.amazon.com/Bluetooth-Audio-Amplifier-Integrated-Subwoofer/dp/B07JVFY27T

Product features

Seismic Audio 15" Speaker Cabinets (Pair)

Great for studio or live performances. Whether you have a permanent installation or mobile, this dual speaker cabinet is rugged enough to handle whatever you throw at it - road ready and built to last. The quality of your sound can only be as good as your equipment and this speaker cabinet should not be overlooked. Each cabinet contains one 15" woofer with a 50 oz. magnet and 2" Kapton voice coil each, wired at 8 ohms. This configuration crystal clear sound while rejecting extraneous noise. Each cabinet is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners. These features along with the strap handles on the side and full metal grill make this cabinet fit right in with your other professional equipment on stage. Awesome quality speaker cabinets are very hard to find, especially when low on cash. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. With your purchase, you will receive two 15" speaker cabinets pictured and described above. So, grab one today and get ready for years of trouble-free, crystal clear sound!

SA-15.2

This listing is for a pair of 15" passive speaker cabinets. You will receive two identical speaker cabinets, pictured and described above. Our SA-15.2s are well-suited for use for DJs, as mains, for PA use, keyboards, vocals, studio monitors, and other applications like gigs, weddings and churches, and sound & studio monitors. These cabinets also have pole mounts in the bottom panel. Well-suited for a full PA system.

Jack Plate & Inputs

Our SA-15.2s are outfitted with heavy-duty jack plates that house two 1/4" inputs. This feature enables this speaker cabinet to be easly daisy-chained and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Functional & Protective Hardware

Heavy-duty, rugged hardware protect our SA-155.2 cabinets with a fully metal grille on front, heavy-duty metal corners, and thick, durable rubber feet. These cabs also have pole mount hardware making it easy to elevate.

Heavy-Duty Handles

In order to transport your speaker cabinets easily, our durable strap handles on the left side do the job. The strap handle location enables easy handling and supplements the fast that the SA-15.2s can be used on their side for monitor use.

• Model # - SA-10M (Set of 2) - 14” tall – 13.25” wide – 21” deep
• Woofer - 10” 2 way crossover w/ a 40 oz magnet & 2” voice coil. 100 Watts RMS – 200 Peak.
• Wired at 8 ohms. 45Hz –20KHz. Sensitivity: 95 db. Piezo Tweeter - 4x8
• 5/8 plywood front panel. Black carpet w/ black metal corners. Recessed handles. Metal Grill
• Input terminal with two 1/4" inputs. Dual ports. These monitors are new. One year warranty.

User questions & answers

Question:	do this monitors need an amp? what would be recomended
Answer:	Thank you for asking. These are passive speakers so they will need an amp to power them. Have a great day!
Question:	what kind of amp do i need for these
Answer:	Hello, thank you for your interest in the SA-10m monitors. The amp you need will depend greatly on your application. An amp that will provide 150 watts per speaker would be optimal. You could use the LE-3000 from Seismic Audio for these if you wanted. They would provide 350 watts per speaker, which is more than is necessary, but they will run as long as you keep from supplying too much power. Have a great day!!
Question:	Will it work with the monitors out of my yamaha mg10x power mixer? or should i just daisy chain this from my powered jbl eon speakers
Answer:	Hi Francis,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! This listing is for a pair of our SA-10M PASSIVE floor monitors. You will need a power amplifier to drive these passive SA-10M floor monitors. The Yamaha MG10X is a console mixer and does not feature a built in power amplifier, so I would not consider this Yamaha mixer to be a "powered" mixer. I can only find line-level outputs, i.e. XLR or 1/4" TRS. So, this means you can either use a separate power amplifier to power these floor monitors, or you can check out the active version of these speakers, our SA-10MT-PW, which can be viewed here:https://www.amazon.com/Seismic-Audio-SA-10MT-PW-Pair-Powered-Titanium/dp/B00CZRHOJQ/ref=sr_1_2?ie=UTF8&qid=1474037938&sr=8-2&keywords=sa-10mt-pwWith these SA-10MT-PW, you can either daisy chain them off of your powered JBL EON 15" speakers, or you can output from your Yamaha mixer's 1/4" monitor output and control them separately from the mains, from the mixer. Let us know if you have any questions.Thanks,Rusty
Question:	Do i have to plug in both holes
Answer:	No, You don't!

Product features

Seismic Audio Pair 10" Wedge Floor Stage Monitors Speakers

These monitors are great for vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. These can be used on any setup for full band or drum monitors. Each monitor contains one 10" speaker with a 40 oz. magnet and 2-inch voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each monitor is made with 5/8" plywood. 10" monitors are ideal when you floor space is limited or your drummer needs a dedicated monitor and doesn't have much room. These 10" monitors take up a very small foot print on your stage. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. So, get ready for years of trouble-free, crystal clear sound!

SA-10M

This listing is for a pair of 10" passive wedge style floor monitors. You will receive two identical floor monitors, pictured and described above. Our SA-10M's are well-suited for use for DJs, vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. Well-suited as part of a full PA system.

Jack Plate & Inputs

The SA-10M is outfitted with heavy-duty jack plates that houses two 1/4" inputs and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio

Protective Hardware

Heavy-duty, rugged hardware protect our SA-10M monitors with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

n order to transport your monitors easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Pair of Dual Speakon and 1/4" Jack Plates Metal Jack Plate 4 1/2" x 6 1/4" cut-out hole size: 3 3/8" x 5 1/8" Black in color Has two 1/4" inputs Also has two speakon inputs This jack plate is brand new. One year warranty This listing is for a set of two dual speakon with dual 1/4" Jack Plates. You will receive 2 Jack Plates pictured and described above.

• Metal Jack Plate - Sold in Sets of 2
• 4.5" x 6.25"  Black in color
• Has two 1/4" connectors
• Also has two speakon inputs
• These plates are brand new.  One year warranty

User questions & answers

Question:	good for 2 celestions in cab
Answer:	Hi, These jackplates could work in a guitar or PA cabinet. When we use these jackplates in our passive cabs, all of the jacks get wired parallel to each other, so that any can be an input, then once the input is connected, the rest of the jacks become available outputs for daisy chaining purposes. Thanks, Rusty
Question:	Is there a product that has 4 speakon ports and no 1/4" port jack plates
Answer:	YES,..... On Amazon, type in: "(2) Two Black Metal Speaker Jack Plates for Dual Large SpeakOn with NL4MPR 4 Pin" And there youll have jack plate with only 2 speakon jacks and NO 1/4" Go check it out !
Question:	how do u connect these u know not to ur speaker to ur amplifer i mean this terminal to ur speaker with the speakon and 1/4 jack
Answer:	Thank you for asking. When we use these jacks in our speakers we connect all of the positives (tips and +1) together. Then we connect all the negatives (sleeves, and +2) together. This makes the jack plate "fully parallel." Then we connect the positive from the speaker to one of the positive terminals and the negative to a negative. This means all the jacks work as an input or an output to add another speaker in parallel. There are dozens of other applications though. Have a great day!!
Question:	Does my purchase include an instruction manual that shows how to wire the jacks
Answer:	Hello, there are no instructions. However the speakon connectors are labelled for where the positive and negative are. The 1/4" connectors are tip positive and sleeve negative. Have a great day!

Product features

Pair of Jack Plates with Dual Speakon and Dual 1/4" Connectors

The Seismic Audio replacement Jack Plates are great for adding to speaker cabinets or replacing old ones. These Jack Plates are made of heavy duty metal construction and are great for replacing a bad jack plate or installing your own in a cabinet you are building.

The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive two Dual Speakon & Dual 1/4" Jack Plates pictured and described. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Upgrade your Speakers!

These jack plates are heavy duty, durable, and great for replacing an old, broken or outdated jack plate. They also are ideal for building your own speaker cabinet.

Superior quality Connectors

The Seismic Audio jack plate features two 4 pole speakon connections and two 2 conductor 1/4 inch TS connections. This configuration makes it compatible with any wood cabinet.

Easy to Install

Our jack plates are easy to install with basic wood screws. They have pre-drilled mounting holes and a cutout dimension of 5 1/8" x 3 3/8".

Product description

Pair of 15" Pro Audio Replacement Drivers - Model #: Seismic Audio - Quake 15, Type: 15" Woofer/Speaker , Power RMS: 250 Watts , Power Peak: 500 Watts , Frequency Response: 50-5K Hz , Sensitivity: 95 db. , Magnet: 50 oz.  , Voice Coil: 2.5" , Impedance: 8 Ohm , Pressed Steel Chassis , Paper cone , Weight: 11 lbs. each, This speaker is brand new. , One year warranty , Listing is for a two woofers, You will receive 2 identical woofers pictured and described above.  Each woofer has the specs listed above, These produce an awesome tone, with great lows and clear, clean highs, Uses include, but are not limited to: Build your own speaker cabinets Replace old woofers .

• Model #: Seismic Audio - Quake 15 (Set of 2)
• Type: 15" Woofer/Speaker.  Power RMS: 250 Watts.  Power Peak: 500 Watts
• Frequency Response: 50-5K Hz.  Sensitivity: 95 db.  Magnet: 50 oz.  Voice Coil: 2.5
• Impedance: 8 Ohm.  Pressed Steel Chassis.  Paper cone.
• These speakers are brand new.  One year warranty

User questions & answers

Question:	I have a pair of 215 black widow PA speakers what would be the best thing to replace with
Answer:	Hi George,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! I think these Quake-15 you referenced could certainly work, but they are not our top of the line 15" replacement woofers. This would be the Denali series, which can be viewed here:Denali-15Pair:https://www.amazon.com/Seismic-Audio-Denali-15-Pair/dp/B004Y6PY16/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1484578643&sr=1-2&keywords=denali-15Either would work, but the Denalis should provide a better overall tone, especially in the bass and mid frequencies.Thanks,Rusty
Question:	What is the hole cut out for this speaker
Answer:	Hi J, The Quake-15 woofers have a cutout diameter of 14 1/8". Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

• Model # - SA-12M (Set of 2) - 21” tall – 15” wide – 24” deep
• Woofer - 12” 2 way crossover w/ a 40 oz magnet & 2” voice coil.  150 Watts RMS – 300 Peak.
• Wired at 8 ohms.  45Hz –20KHz  Sensitivity: 97 db .  Piezo Tweeter - 4x10
• 5/8 plywood front panel.  Black carpet with black metal corners.  Recessed handles
• Full Metal Grill.  Input terminal with two 1/4" inputs.  Dual ports.  One year warranty

Product features

Seismic Audio Pair 12" Wedge Floor Stage Monitors Speakers

These monitors are great for vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. These can be used on any setup for full band or drum monitors. Each monitor contains one 12" speaker with a 40 oz. magnet and 2-inch voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each monitor is made with 5/8" plywood. 12" monitors are ideal when you floor space is limited or your drummer needs a dedicated monitor and doesn't have much room. These 12" monitors take up a very small foot print on your stage. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. So, get ready for years of trouble-free, crystal clear sound!

SA-12M

This listing is for a pair of 12" passive wedge style floor monitors. You will receive two identical floor monitors, pictured and described above. Our SA-12Ms are well-suited for use for DJs, vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. Well-suited as part of a full PA system.

Jack Plate & Inputs

The SA-12M is outfitted with heavy-duty jack plates that houses two 1/4" inputs and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio

Protective Hardware

Heavy-duty, rugged hardware protect our SA-12M monitors with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

n order to transport your monitors easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Pair of 35 Foot 1/4" to 1/4" PA DJ Speaker CableModel #: FS35 (2 Pack). Each end has 1/4" connectors (mono connectors). 14 ga 2 conductor wire with pvc wrap. Length: 35 Feet. Condition: NEW. One Year WarrantyWhether you have a permanent installation or mobile, Seismic Audio's Speaker Cables are rugged enough to handle whatever you throw at them - road ready and built to last. The quality of the cables you use to connect your sound equipment is critical if you are looking for an accurate music and sound reproduction. Awesome quality speaker cables are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive 2 speaker cables pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Model #: FS35 (2 Pack)
• Each end has 1/4" connectors (mono connectors)
• 14 ga 2 conductor wire with pvc wrap
• Length: 35 Feet
• Condition: NEW

User questions & answers

Question:	Can i use these cords for an 8 ohm set of behringer b210d powered speakers ran through a behringer mixer for clear and loud sound with no buzzing
Answer:	Hi Susan, You would not use these FS35 1/4" TS speaker cables with self powered (active) speakers. These cables are meant to connect a power amplifier to passive speakers. If you can email us directly at [email protected] with the model of Behringer mixer you have, we can take a look and see exactly what type of cable you would need. With powered speakers, you would need to make sure you have line-level (not amplified) outputs from your mixer, and if you need 1/4" cable, this would usually be 1/4" TRS or 1/4" TS guitar/instrument type cable. Both of these cables are higher gauge (22-25 AWG) and thinner wire than the speaker cable. We can not reply back or comment to this Amazon Answers question, so make sure you email us directly. Thanks, Rusty
Question:	Can i get just one fs35 dj. speaker cable
Answer:	Hi Carole, Here is a link to a single FS35 1/4" speaker cable, 35 foot: https://www.amazon.com/Seismic-Audio-FS35-35-Speaker-Cable/dp/B005UQU3SI ----Thanks, Rusty
Question:	Can i use these to connect my behringer b210d powered speakers to a behringer mixer
Answer:	Hi Susan, I saw your other question. email us directly at [email protected] with the model Behringer mixer you are using, and we can let you know what type of cable you need. These FS35 are 1/4" TS speakers cables, meant to connect passive speakers to a power amplifier or powered mixer mixer with power amplifier built in. You would not use these cables to connect powered speakers to a mixer. Thanks, Rusty

Product description

Pair of Dual 15" DJ Speakers with two 35' Speaker Cables Package #: SA-155T-PKG22. PA Package. Pair of Dual 15" PA Speaker Cabinets. Pair of 35' Speakon Speaker Cables. Ideal for Bands, PA, DJ's, Church, etc. Model: SA-155T (Pair). Dual 15 Inch PA/DJ Speaker Cabinets. 700 Watts RMS; 1400 Watts Peak each. Wired at 4 Ohms. 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat. Woofers have a 50 oz Magnet and 2" Voice Coil. Two 1/4" and two Speakon Inputs. Dimensions: 45"x18"x15". 73 lbs per Cabinet. Model: TW12S35 (Pair). Pair of 35' Speakon to Speakon Speaker Cables. 2 Conductor. Speakon to Speakon Locking Connectors. PVC Wrapped. 35 Feet each. 2.2 lbs each. One Year WarantyThese amazing 15 inch Pro Audio Speaker Cabinets deliver every sound loud and clear with dual Pro Audio 15 inch woofers, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 700 watts RMS, 1400 watts peak power. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! Great quality mains are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of dual15 Inch Passive 2-Way PA Speakers and a pair of 35 foot speakon speaker cables pictured and described above.

• Package #: SA-155T-PKG22
• PA Package
• Pair of Dual 15" PA Speaker Cabinets
• Pair of 25' Speakon Speaker Cables
• Ideal for Bands, PA, DJ's, Church, etc

Product description

Pair of Plastic Recessed Handles for PA Speakers MODEL: SAHDL402 (Pair). CONTENTS: Plastic Recessed Handles for PA Speakers. CONDITION: New. DIMENSIONS: 7" x 6" x 2 1/4". FEATURES: Ideal for PA Speakers - Building your own or replacing old ones. CONSTRUCTION: Plastic. COLOR: Black. WARRANTY: One Year WarrantyThese Plastic Recessed Handles are ideal for adding to your PA Speaker Cabinets or replacing old ones! Multiple screw points and durable to make carrying your speakers a little easier! The black finish makes these corners a perfect accessory to your PA Speakers! Save and order these today! You can never have enough of these in your toolbox. With your purchase, you will receive 2 Plastic Recessed Handles pictured and described above. So, put it in your cart and be ready for all the road throws at you!

• MODEL: SAHDL402 (Pair)
• CONTENTS: Plastic Recessed Handles for PA Speakers
• CONDITION: New
• DIMENSIONS: 7" x 6" x 2 1/4"
• FEATURES: Ideal for PA Speakers - Building your own or replacing old ones

Product description

Pair of Dual 15" Mains and a Pair of 18" Sub Woofers Package #: SA-155TPKG3  Speakers Model #: SA-155T (Pair) Woofer: Two 15" 2 way and each has a 50 ounce magnet with a 2" kapton voice coil 700 Watts RMS - 1400 Watts Peak Wired at 4 ohms 45Hz - 20KHz Sensitivity: 96 db Tweeter: 1.5" Titanium driver with 10z. magnet and 1" throat Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection 5/8 front panel plywood Black carpet with black metal corners Recessed handles Full Metal Grill Input terminal with two 1/4" & two Speakon inputs Dual ports 45" tall - 18" wide - 16" deep These speakers are brand new. One year warranty  Subs Model # - SAP-18SFF (Set of 2) Woofer - High Power 18" subwoofer Loud Speaker Each has a 90 ounce magnet with a 3" kapton voice coil 500 Watts RMS - 1000 Watts Peak Wired at 8 ohms 30Hz - 125Hz Sensitivity: 98 db 3/4 Plywood Front Panel Black carpet with black corners Recessed Black handles Input terminal with two 1/4" and two speakon inputs Speaker Mount on top of cabinet 28" tall - 20" wide - 20" deep These speakers are brand new. One year warranty You will receive two dual 15" Speakers and two 18" subwoofer with this listing.  These are ideal for full bands, clubs, DJs, etc.

• SA Dual 15's has 2 15" woofers. 700 W RMS - 1400 Peak. Titanium Horn. 4 ohms. 45Hz - 20KHz.
• Sensitivity 96 db. 2-way Crossover. 5/8" Plywood Front Panel. Two 1/4" & Two Speakon Inputs.
• Dual Ports. Recessed Handles. Full Metal Grill. Black carpet with black metal corners.
• SA 18" Subs is a 18" High Powered Subwoofers. 500 W RMS - 1000 Peak. 30Hz to 500Hz.
• 8 Ohms. Sensitivity 98 db. Speaker Mounts on Top. Two 1/4" & Two Speakon Inputs.

User questions & answers

Question:	Excuse my ignorance but are the speakers wireless
Answer:	Yes. This is a digital coax. It looks like RCA plugs, only the wire is thicker, shielded RG6 and transports data digitally. Digital data like your cd player audio to your amplifier. Regular RCA cables are for analog data, like your game consoles video into your tv. In which case you don't really need the thicker cable and shielding. This should work perfect for what you are doing.
Question:	Do it need a amp? or its all powered speakers
Answer:	CL2 or CL3 means it's plenum rated or suitable for in wall installation. I purchased this cable for that purpose specifically.
Question:	Does the subwoofer have a low pass filter
Answer:	I purchased mine to run from my S/PDIF output from my smart TV to my sound system, and I am unsure if this is best for a sub woofer, but I do know it is a high quality cable, and should suffice for your needs, especially for the price.
Question:	Are these powered or passive
Answer:	Just bury it in conduit and it should be fine. You can always pull it out while "fishing" a new one back through.

• Model # - SA-15M (Set of 2) - 23” tall – 18” wide – 17” deep
• Woofer - 15” 2 way crossover w/ a 50 oz magnet & 2.5” voice coil. 250 Watts RMS – 500 Peak.
• Wired at 8 ohms. 40Hz –20KHz. Sensitivity: 97 db. Piezo Tweeter - 4x10
• 5/8 plywood front panel. Black carpet w/ black metal corners. Recessed handles. Metal Grill
• Input terminal with two 1/4" inputs. Dual ports. These monitors are new. One year warranty.

User questions & answers

Question:	How do you connect these to drum mics? Is this even possible
Answer:	Hi Dj S.,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! This package contains the SA-155T dual 15" passive mains, and the SAP-18SFF passive 18" subwoofers. You will need an amplifier(s) to power these speakers/subs. You can go with something like our Epicenter5004, which can be viewed here:Epicenter5004:https://www.amazon.com/Seismic-Audio-Epicenter5004-Channel-Amplifier/dp/B00B4FS15G/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1471549433&sr=1-1&keywords=epicenter5004This 4 channel amplifier is capable of handling all 4 of these cabinets. You could put the SA-155T on channels 1 & 2, then put the subs on channel 3 and 4. This Epicenter5004 should provide adequate wattage to these cabinets for most small to medium sized gigs. Technically speaking, this Epicenter5004 will not push the speakers to their full potential. To factor this wattage, multiply the wattage of the speakers and subs by 1.5. For example, the SA-155T are rated at 700W RMS @ 4Ω, so 700 * 1.5 = 1050W RMS @ 4Ω, for the ideal rating of the amplifier driving these SA-155T. If you want the ability to push these cabinets to their full potential, you should look into a pair of something like our Magnitude2400 amps, which can be viewed here:Magnitude2400:https://www.amazon.com/Seismic-Audio-Magnitude2400-Channel-Amplifier/dp/B00B4FS09I/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1471549638&sr=1-1&keywords=magnitude2400Let us know if you have any questions.Thanks,Rusty
Question:	I have a mixer connected to two powered speakers, how do i connect this speakers with them without an amplifier
Answer:	Hi Roger, The subwoofers in this package are the SAP-18SFF. These subs will have an internal crossover unit with a crossover point of 200 Hz and a 12 dB slope. Thanks, Rusty
Question:	Can you daisy chain the 15” with the 10”s
Answer:	Hi falteredtheory,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! This SA-155TPKG3 features the SA-155T dual PASSIVE 15" loudspeakers and the SAP-18SFF 18" PASSIVE subwoofers. The SA-155T loudspeakers are rated at 700W RMS @ 4Ω each, and the SAP-18SFF subwoofers are rated at 500W RMS @ 8Ω each. You will need a power amplifier or powered mixer console to drive these passive cabinets. Ideally you want to try and provide around 1.5 times the wattage of the speakers from the amplifier, i.e. 700W * 1.5 = 1050W RMS @ 4Ω for the amplifier driving the SA-155T and 500 * 1.5 = 750W RMS @ 8Ω for the amplifier driving the SAP-18SFF subwoofers. If you check out the power amplifiers we offer, I would recommend looking at something like the Epicenter5202 for the SA-155T and the Magnitude2400 for the SAP-18SFF subwoofers. You can view these amplifiers here:Epicenter5202:https://www.amazon.com/Seismic-Audio-Epicenter5202-Channel-Amplifier/dp/B00IKU6MCC/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1470058002&sr=1-1&keywords=epicenter5202Magnitude2400:https://www.amazon.com/Seismic-Audio-Magnitude2400-Channel-Amplifier/dp/B00B4FS09I/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1470058021&sr=1-1&keywords=magnitude2400You could also use something like our 4 channel Epicenter5004, which can be viewed here:Epicenter5004:https://www.amazon.com/Seismic-Audio-Epicenter5004-Channel-Amplifier/dp/B00B4FS15G/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1470058057&sr=1-1&keywords=epicenter5004Even though these Epicenter amplifiers would not provide the ideal 1.5 times the wattage for the SA-155T mains, these Epicenter amps (along with the Magnitudes) are higher quality and will still effectively drive these mains and subs. We do also carry several powered mains and subwoofers if you are interested in those instead. Let us know!.Thanks,Rusty
Question:	what size amp should i use for dj purposes
Answer:	They are RG-6 Cable which is capable of much higher frequency levels than Audio. So yes these are very good for analog audio connections.

Product features

Seismic Audio Pair 15" Wedge Floor Stage Monitors Speakers

These monitors are great for vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. These can be used on any setup for full band or drum monitors. Each monitor contains one 15" speaker with a 2 way crossover and 50 oz. magnet and 2.5-inch voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each monitor is made with 5/8" plywood. 15" monitors are ideal when you floor space is limited or your drummer needs a dedicated monitor and doesn't have much room. These 15" monitors take up a very small foot print on your stage. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. So, get ready for years of trouble-free, crystal clear sound!

SA-15M

This listing is for a pair of 15" passive wedge style floor monitors. You will receive two identical floor monitors, pictured and described above. Our SA-15M's are well-suited for use for DJs, vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. Well-suited as part of a full PA system.

Jack Plate & Inputs

The SA-15M is outfitted with heavy-duty jack plates that houses two 1/4" inputs and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio

Protective Hardware

Heavy-duty, rugged hardware protect our SA-15M monitors with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

In order to transport your monitors easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Pair of Dual 10" PA/DJ Speakers with two 25' Speaker Cables Package #: SA-100T-PKG21. PA Package. Pair of Dual 10" PA Speaker Cabinets. Pair of 25' Speakon Speaker Cables. Ideal for Bands, PA, DJ's, Church, etc. Model: SA-100T (Pair). Dual 10 Inch PA/DJ Speaker Cabinet. 300 Watts RMS; 600 Watts Peak each. Wired at 4 Ohms. 6x12 Titanium horn driver. Woofer has a 40 oz Magnet and 2" Voice Coil. Two 1/4" and two Speakon Inputs. Dimensions: 31.5"x15.5"x12". 59 lbs per Cabinet. Model: TW12S25 (Pair). Pair of 25' Speakon to Speakon Speaker Cables. 2 Conductor. Speakon to Speakon Locking Connectors. PVC Wrapped. 25 Feet each. 1.6 lbs each. One Year WarantyThese amazing 10 inch Pro Audio Speaker Cabinets deliver every sound loud and clear with dual Pro Audio 10 inch woofers, 6x12 titanium horn driver, a frequency response of 45Hz to 20,000Hz, and 300 watts RMS, 600 watts peak power. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! With your purchase, you will receive a pair of dual 10 Inch Passive 2-Way PA Speakers and a pair of 25 foot speakon speaker cables pictured and described above.

• Package #: SA-100T-PKG21
• PA Package
• Pair of Dual 10" PA Speaker Cabinets
• Pair of 25' Speakon Speaker Cables
• Ideal for Bands, PA, DJ's, Church, etc

User questions & answers

Question:	are these 8 ohm or 6 ohm
Answer:	Hello, these are "passive" speakers. That's a speaker that needs an amplifier and has no power cable. Powered speakers would take power and a "signal" cable. You will be looking for "bluetooth" or "wireless" speakers. They will generally be described by how you connect to them.