13 best rockville base speakers

Product description

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered tube. Growing up one of my best friends bought a car and it had a powered tube in it. The sound that it produced was just amazing and I will never forget it. Tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.



As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the tube and you are ready to enjoy the most incredible bass you have ever heard.

• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• 12“ High power woofer in vented tubular enclosure. Integrated, built-in 300 Watts RMS Rated amplifier.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.
• Adjustable bass crossover. Dashboard adjustable bass remote control. Molded steel woofer grill.
• Four steel mounting brackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 12.75” x 22.83“.
• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.

User questions & answers

Question:	Why can’t I return this item ,it was wrong one
Answer:	Ask the seller, there customer service isn't the best
Question:	Is it waterproof
Answer:	I really don't think so.
Question:	Anyone know the cubic/ft volume of the tube itself
Answer:	600 watts
Question:	Why does it say 500 watts on the subwoofer? But you say 600 watts
Answer:	It's neither. Your lucky if you get 200 watts out of it but depends on which input you use and the radios output. I opened mind to see what the audio chips looks like and they are only rated at 150 to 200 watts max.

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.

Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.

'Good things do come in small packages' Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.

Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.

Product description

Add serious low end to your gig with the Rockville bass gig rbg-18s powered subwoofer. This is an incredible sounding powered sub that features a 18" driver with up to 2000-watts of peak power for tremendous bass that can run all Night without stopping. The subwoofer features a high temperature 4-layer 4” voice coil and is set in a 120oz magnet motor structure. The amplifier features an internal heat sink with a heat sensitive, variable speed, Auto turn-on fan cooling system, so even when your music gets hot ‐ your amp will stay cool.



you can tailor your sound using the built-in DSP (Digital Signal processor), which allows you to either add extended boost or extended low frequency enhancement. The DSP circuit also controls over-excursion, thermal, and clipping protection which will ensure you can pound your subs hours straight without any damage occurring. This sub is built to last for years and years of use. A 3 position low pass Crossover filters out the highs to make your system sound Its Best whatever venue you're in.



for added convenience and easy set-up, the RBG18S units feature combo XLR ‐ ¼&duo; TRS inputs with level control and XLR thru puts to secondary units. Just connect your main mix outputs to the subwoofer, and then link your main speakers from the RBG18S! This sub features a heavy-duty pole-socket so you can mount your main speaker on top for easy setup and positioning and carry handles so you can easily transport it. Additional controls include a polarity switch, which allows you to invert the woofers polarity when installing The subwoofer away from the main speakers. This allows for near perfect time alignment of the subwoofer low-end frequencies to your main speakers.

• Rockville RBG18S 18" 2000 Watt Active powered PA subwoofer
• 500 Watts RMS/ 1000 watts Program/ 2000 Watts Peak. 18&Quot; woofer with 120oz magnet and 4" voice coil
• Frequency response: (+/-3dB) 29Hz - 150Hz. Maximum SPL @ 1W/ 1M: 125dB peak/ 120dB continuous
• Dsp Digital Signal processor with boost or extended low frequency control. Power-on and signal input LED indicators
• Signal input LED indicator. Clip limiter circuitry with LED indicator. Balanced XLR + TRS input jacks
• Balanced XLR Thru/output jacks for parallel connections. Passive heat sink with heat sensitive variable speed Auto turn-on fan for cooling
• Subwoofer crossover 80Hz/100Hz/120Hz low pass. Subwoofer level adjustment. Subwoofer phase control

User questions & answers

Question:	Puedo usarlo para monitor de bajo
Answer:	No ,yo soy musico y la verdad es tremenda equipo pero para Usarlo DJ systems. La frecuencia del Bajo es mas fuerte y profunda .
Question:	I have the rbg15. I was thinking of buying the rbg18. Can i run both of these with my peavey pv115d's
Answer:	Yes. Depends on how many outputs you have on the mixer. You can run a rca out to dmx cable to the speakers.
Question:	I am doing an outdoor dance and will be about 100' from a power source, what size extention cord will I need to power this sub
Answer:	I always buy ... #12 AWG...wire extension cord either 100'...or two 50 footers.That size will be more than adequate for most any application around your house or outside.Get two fifties much easier to use a fifty when you need one around the house or outside if you don't require a 100' er.
Question:	Can this be used for home theater setup, and run signal from the sub out on my receiver using an XLR adapter
Answer:	yes , most receivers have a subwoofer low level (un amplified) RCA output. You could use an RCA X 1/4" TPS . RCA would plug into receiver and 1/4" TPS to Rockville sub. Remember the input on the sub is XLR - 1/4" combo . Which means you could plug either one into same input on subwoofer. You asked about using XLR . You do do that but I'm willing to bet it'd be easy to find a cable with RCA on one end and 1/4" TPS at the other vs RCA on one end and XLR at the other end. Either will work!

Product features

Rockville RBG18S 18" 2000 Watt Active Powered PA Subwoofer With Digital Signal Processor Built In

Add serious low end to your gig with the Rockville Bass Gig RBG-18S powered subwoofer. This is an incredible sounding powered sub that features a 18" driver with up to 2000-watts of peak power for tremendous bass that can run all night without stopping. The subwoofer features a high temperature 4-layer 4” voice coil and is set in a 120oz magnet motor structure. The amplifier features an internal heat sink with a heat sensitive, variable speed, auto turn-on fan cooling system, so even when your music gets HOT – your amp will stay cool.

You can tailor your sound using the built-in DSP (Digital Signal Processor), which allows you to either add extended boost or extended low frequency enhancement. The DSP circuit also controls over-excursion, thermal, and clipping protection which will ensure you can pound your subs hours straight without any damage occurring. This sub is built to last for years and years of use. A 3 position Low Pass crossover filters out the highs to make your system sound its best whatever venue you're in.For added convenience and easy set-up, the RBG18S units feature combo XLR – ¼” TRS inputs with Level control and XLR thru puts to secondary units. Just connect your main mix outputs to the subwoofer, and then link your main speakers from the RBG18S! We also have RCA inputs for other devices like home theater systems. This sub features a heavy-duty pole-socket so you can mount your main speaker on top for easy setup and positioning and carry handles so you can easily transport it. Additional controls include a polarity switch, which allows you to invert the subwoofers polarity when installing the subwoofer away from the main speakers. This allows for near perfect time alignment of the subwoofer low-end frequencies to your main speakers.Lets talk power for a second. Different brands have unique ways of rating their products. So off brands might just make up crazy peak power ratings and write things like 10,000 watts. Premium brands will generally give you legitimate RMS power ratings. So let me explain our ratings and our thought process. This powered sub is 500 watts RMS rated. This is the true continuous power rating. So if a premium brand such as Yamaha or Mackie were to build this same subwoofer, this is around the same RMS rating they would rate it at. 1,000 watts program power is basically a safe number the sub can handle during peak power of the songs but at an average volume level. This is the way some middle-of-the-road brands would rate it. The peak power of 2,000 watts is what the sub can produce for a split second during the loudest point of a song at full volume. I have seen entry level brands write 4000 watts on subs with less than half the power of this one. Our peak rating is actually a legitimate peak rating, however peak ratings are not important and can vary greatly depending on many factors.

Product description

Rockville is proud to introduce the all new PBG18 18” professional subwoofer. This latest addition to our bass gig series is our most powerful and best quality passive subwoofer to date. We tested these against subwoofers from leading brands in the industry such as Peavey, Yamaha, and others and these held their own! Please do not compare this to any off brand name subs. This subwoofer is commercial grade. The advantages of purchasing Rockville, Yamaha, Peavey, or other high end brands are longevity, power, sound quality, and sensitivity. We did so much testing. There is a huge difference between the quality and components of this versus off brand names. The off brand enclosures are built with a material called particle board. We spend more money manufacturing these with MDF, which will hold up for a much longer time than particle board. Better quality wood also equals better sound! The pro audio subwoofer in the cabinet has a very large 4" KSV voice coil and a 100 oz. high quality magnet. The off brand names models will usually have a magnet half the size and a voice coil half the size as well. The advantage is that our unit can handle more power and will last longer. These subs can take a real beating! Another thing we wanted to focus on is the sensitivity. When we were doing all our testing we noticed with the same amplifier, one subwoofer we were testing against went louder than the rest. The reason was because it had a better sensitivity rating. This means that it was more sensitive to amplifier power. We had our engineers design this sub to have as good of a sensitivity rating as that particular sub we tested that we liked.

• Rockville PBG18 18" 2000 Watt Passive Pro Subwoofer w/ MDF Cabinet and Pole Mount.
• 18" Pro audio woofer. 1,000 Watts RMS Power. 1,500 Watts Program Power Handling.
• 2,000 Watts Peak Power. 4" KSV voice coil. 100 oz. woofer magnet. Vented Enclosure for Improved Bass Response.
• Construction: High-Density, High-Quality Non Resonant MDF, Stapled, Bonded & Braced.
• Ergonomic Recessed Handles. Molded Steel Grill. Aviation Grade Black Carpet.
• Pole Mount. Rubber Isolating Feet. 1/4" Jack (In/Out). Speak ON (In/Out).
• All input/output connections are internally connected in parallel.

User questions & answers

Question:	I have a rockville active set of speakers, and an active 15 sub. can i add this passive sub to this set, or should the second sub be active as well
Answer:	Yes you can mix active and passive; however, you will need a separate power amp to push it. I have one of these and love it, no regrets. I use it with my Rockville power amp
Question:	Do these have better bass then the powered 18s
Answer:	Hello, Yes these are a great addition to your system the bass response is great with the right amp and crossover! If you want more bass then what these have to offer yes, Our powered 18 will be a better choice. Here is a link http://www.amazon.com/Rockville-RBG18FA-Active-Powered-Subwoofer/dp/B00HHFY8TA/ref=sr_1_1?ie=UTF8&qid=1459862701&sr=8-1&keywords=RBG18FA
Question:	Can this subwoofer 4ohm go with my rockville channel 2400w powered mixer 5band rpm
Answer:	you'll be fine. I like the 18" & have 4 of them. go big if you can.
Question:	Can the Rockwell powered speakers 12s power up this sub woofer or do it need separate amp
Answer:	You need a amp!

Product features

Rockville PBG18

Rockville is proud to introduce the all new PBG18 18” professional subwoofer. This latest addition to our bass gig series is our most powerful and best quality passive subwoofer to date. We tested these against subwoofers from leading brands in the industry such as Peavey, Yamaha, and others and these held their own! Please do not compare this to any off brand name subs. This subwoofer is commercial grade. The advantages of purchasing Rockville, Yamaha, Peavey, or other high end brands are longevity, power, sound quality, and sensitivity. We did so much testing. There is a huge difference between the quality and components of this versus off brand names.

The off brand enclosures are built with a material called particle board. We spend more money manufacturing these with MDF, which will hold up for a much longer time than particle board. Better quality wood also equals better sound! The pro audio subwoofer in the cabinet has a very large 4" KSV voice coil and a 100 oz. high quality magnet. The off brand names models will usually have a magnet half the size and a voice coil half the size as well. The advantage is that our unit can handle more power and will last longer. These subs can take a real beating! Another thing we wanted to focus on is the sensitivity. When we were doing all our testing we noticed with the same amplifier, one subwoofer we were testing against went louder than the rest. The reason was because it had a better sensitivity rating. This means that it was more sensitive to amplifier power. We had our engineers design this sub to have as good of a sensitivity rating as that particular sub we tested that we liked. Another major factor that effects the sound is frequency response. Our model sounded more musical than some of the famous brands we tested it against. One sub we tested would make our ceiling rattle a lot just because it had a very deep tone. The problem was it was not musical. Our model hits those same deep tones when it is supposed to, but also has the ability to hit some mid-low tones that this other sub was not hitting.

Our PBG18 is the best value on the market for a very high-end pro subwoofer with lots of power and great sound. I am so confident you will be happy with this product that we will give you a 90 day money back guarantee. If you are not happy with it you can return it within 90 days and get your money back. On top of this you also get a 1 year warranty.

• Rockville W10K9D4 K9 Series 10" Dual 4-Ohm Car Subwoofer. Peak Power Handling: 3200 Watts. Program Power Handling: 1600 Watts. CEA Rated RMS Power Handling: 800 Watts.
• 3" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire Made in Japan. The CCAW Wire we use is made in Japan. It is one of the most important components to make the sub high quality and last longer.
• Double Stacked 164 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight. Black Non-Pressed Paper Cone With Beautiful Finish.
• Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power.. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion.
• Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap. Impedance: Dual 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation.

User questions & answers

Question:	What size box ported is best for these subs
Answer:	Rockville ported box
Question:	Can I put 2 subs with 8000w and run each sub at 3000w and Max the amp out at 6000w without blow up I hea number are wrong
Answer:	I would take the subs out of the box and check the magnet that should have a sticker with a correct number on it, amazon posted fake wattage. Each sub should run around 1100 to 1500 watts I wouldn’t run anymore then 2500 watts on both subs or you will end up with a weird smell in your car and down a bunch on money and a broken subwoofer. If I where you I would just go with sundown or skar audio these subs aren’t even worth any money when u could spend 150 bucks on an 8 inch that would hit harder then 2 12” rockvilles.
Question:	Wht is the true rms of this rockville 10inch
Answer:	500w rms. It says this all over the damn descriptions of each sub. I have had one of the K6 10” subs for close to a years. Everyone is shocked when they learn it’s just one 10 pumping all that bass. I plowed mine with a RF 500 watt rms mono amp and the sub handles it fine. Good pairing. Just bought a second sub and replaced my RF amp with a Skar RP-1200.1 and I’m floored.
Question:	What is the real rms of this
Answer:	Troy is damn near dead on. Best I could do was 1015 before I started smelling it. Personally, I would push over 750 continuous with it. Watch the videos on youtube they burn up quick. And just cause your amp says it pushes 1250 doesn't mean that's what the speaker is pulling. Do a real DT yourself and stop throwing out random numbers you read on the side of a box

Product features

Rockville W15K9D2 15" 5000w Car Audio Subwoofer Dual 2-Ohm Sub CEA Compliant

• Rockville W15K9D2 K9 Series 15" Dual 2-Ohm Car Subwoofer
• Peak Power Handling: 5000 Watts
• Program Power Handling: 2500 Watts
• CEA Rated RMS Power Handling: 1250 Watts
• 3" 4-Layer Black Aluminum Voice Coils Wound with OFC Wire Made in USA.
• This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA!
• Double Stacked 190 Oz High Quality Magnet
• Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
• Two Chrome-Plated Binding Post Terminals
• Black Non-Pressed Paper Cone With Beautiful Finish
• Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power.
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
• Red Stitching Cone Reinforcement Ensures Long Life

Detailed Info:

• Body: Non-Pressed Paper
• Gap Plate Inside Diameter: 95mm (3.74 inches)
• Gap Plate Outside Diameter: 190mm (7.5 inches)
• Gap Plate Thickness: 25mm (1 inch)
• Yoke Outside Diameter: 180mm (7.1 inches)
• Yoke Thickness: 10mm (0.4 inches)
• Yoke Pole Diameter: 75mm (3 inches)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

TS Parameters:

Series :

Fs : 30.03 Hz Qms: 8.59 Cms: 0.0727 mm/N Bl : 19.14 N/A Zmin : 5.75 Ω Re : 4.00 Ω Qes : 0.8 Mms : 386.4595 g dBspl : 85.72 L1kHz : 4.89 mH Sd: 823.7164 cm² Qts: 0.73 Rms : 8.48 Ωm VAS : 68.8653 L / 2.43 cu ft L10kHz: 1.79 mH

Parallel

Fs : Fs : 30.03 Hz Qms: Qms: 8.59 Cms: Cms: 0.0727 mm/N Bl : Bl : 19.14 N/A Zmin : Zmin : 5.75 Ω Re : Re : 4.00 Ω Qes : Qes : 0.8 Mms : Mms : 386.4595 g dBspl : dBspl : 85.72 L1kHz : L1kHz : 4.89 mH Sd: Sd: 823.7164 cm² Qts: Qts: 0.73 Rms : Rms : 8.48 Ωm VAS : VAS : 68.8653 L / 2.43 cu ft L10kHz: L10kHz: 1.79 mH

• Rockville RTB10A 10“ 500w Powered Subwoofer Bass Enclosure With Bass Remote. 500 Watts Peak/250 Watts RMS. 10“ High power woofer in vented tubular enclosure. Integrated, built-in 250 Watts RMS Rated amplifier. Rear aero vent bass system
• Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 108 db. Adjustable bass crossover. Dashboard adjustable bass remote control
• Molded steel woofer grill. Four steel mounting jackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 10. 75” x 20. 86“

User questions & answers

Question:	Can i connect this to my Rockville rpg 10 inch bluetooth house speaker
Answer:	Hello customer, thank you for the question, our banTamp tube amp series is designed for electric guitar only, we are also dedicated in producing the bass line for this kind of product, please keep on watching our AITONE store. The combo version in our store is MA-10B, a mini practice amp, just for practice at home but not tube. Please consider twice before place order. Thank you!
Question:	Are these marine grade
Answer:	I think it would probably work with the clean channel but it might not best the best thing. Maybe try an amp made for acoustic guitar. I think it would also depend on the type of pickups your guitar has and if you want it to sound more like an electric guitar. There are products like this: Donner Multi Effect Pedal Chain Alpha Acoustic 3 Guitar Effect Modes Acoustic Preamp, Chorus and Hall Reverb https://www.amazon.com/Donner-Effect-Acoustic-Guitar-Preamp/dp/B07KHVQDBJ/ref=sr_1_13_sspa?keywords=sonicake+for+acoustic&qid=1580694674&sr=8-13-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExOUlGN1JGNEJNNlE1JmVuY3J5cHRlZElkPUEwNTI3NDIxMlJBOVdBT1ZEMklTOCZlbmNyeXB0ZWRBZElkPUEwMDk3MzE1S1dWS0FWRFdMOVVVJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== I've never tried this myself and you would still need an amp but if you are just recording you could go direct from it I'm sure.
Question:	It looks like it comes with a plug for a quick disconnect. Is it a full quick disconnect or is stuff hardwired into the unit itself
Answer:	Hello customer, This is just amplifier head with no speaker, you need to connect a cabinet to run it, thank you!
Question:	So it has the wiring also
Answer:	Do you know ORANGE amp? This is about this amp, it is a high gain, but if you would like high gain metal, we suggest our ZOMBIE to you, the Mesa Boogie sound, please refer to JOYO ZOMBIE or ZOMBIE XL, these two beasts would fit you better.

Product features

Rockville RTB10A 10" 500w Powered Subwoofer Bass Tube+Bass Remote + Amp Kit

Package Includes:

• Rockville RTB10A 10" 500w Powered Subwoofer Bass Tube + Bass Remote
• Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RTB10A



Introducing the Rockville RTB10A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB10A is a powerhouse. The compact package features a high power 10” woofer and 500-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.



"Good things do come in small packages" Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.



Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim…experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.



Features:

• Rockville RTB10A 10“ 500w Powered Subwoofer Bass Tube With Bass Remote
• 500 Watts Peak/250 Watts RMS
• 10“ High power woofer in vented tubular enclosure
• Integrated, built-in 250 Watts RMS Rated amplifier
• Rear aero vent bass system
• Speaker level and RCA line-level input
• Frequency response: 30Hz-200Hz
• Sensitivity: 108 dB
• Adjustable bass crossover
• Dashboard adjustable bass remote control
• Molded steel woofer grill
• Four steel mounting brackets + two canvas straps with Velcro fasteners
• Tube is covered in durable aviation grade tweed with embroidered logo
• Dimensions: 10.75” x 20.86“

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RWK10



The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!



Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing. The resistance per foot of this kit is extremely low compared to any other amp kit in its range. The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit. We were more shocked than anyone about these tests, because we used to sell some of those amp kits. (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes set of RCA cables.



Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

 

Product description

The RPB27 is a portable Bluetooth speaker that is the perfect size and power. This speaker is big enough that our engineers were able to get the speaker to produce 20 watts of power with huge bass! It is small enough to bring it with you camping, hiking, or anywhere else. The speaker is extremely rugged! It is shockproof and IPX6 water resistant. This means you can throw it around and bring it in the shower and the speaker will never break!



There may be some similar looking Bluetooth speakers on the market but this is the only speaker at this price point that is rugged, water resistant, and has huge power with huge bass!



Below is what makes ours better:



IPX6 Water Resistant

The RPB27 is water resistant, or splash proof. You can take it with you into the shower, or by the pool side. In reality this speaker can be thrown into water without getting damaged, but we are rating it as splashproof. I tested it in the shower and put it under the showerhead with no problems.



Amazing Power with Bumping Bass!

This speaker puts out a huge 20 watts of power. Its louder than any other speaker I have tested that was similar in size. I’ve tested many Bluetooth speakers, and this one sounds better than speakers that are way bigger! Our sound quality is amazing. This speaker has great bass and crystal clear highs with a distortion rating of less than 1%. What makes the bass so loud is that the speaker has a passive radiator to enhance the bass. That basically mean the speaker has an extra subwoofer built in that focuses on playing back bumping bass!



Rugged Design

Built with 100% ROHS Silicone & ABS, this enclosure design delivers top of the line sound quality. It includes rubber feet for great sound when placing the speaker on any hard surface. The design mold is an exclusive Rockville design!

• Includes: Bluetooth Speaker, Aluminum Carabiner Clip – to clip speaker to your backpack, String to hang from a showerhead backpack, MicroUSB Charging Cable, and User Manual and Warranty Card.
• Rockville RPB27 rugged waterproof portable Bluetooth speaker with 20 watts power. IPX6 Water Resistant. 20 watts peak power. 10 watts continuous RMS. Battery charges with included USB cable. 1000 mAH battery supports 18 hours of playback at 50 % volume!
• Charge time: 4-5 Hours. Our speaker has the loudest bass from any competing Bluetooth speaker! Extremely loud, powerful, and rugged. Material: 100% ROHS Silicone & plastic – This enclosure design delivers top of the line sound quality.
• Includes Aluminum hook to latch it onto a backpack, pocket book, etc. Bluetooth version. 4.1 with EDR (Enhanced Data Rate). A2DP audio streaming 40 foot max Bluetooth range. Playback Controls - Play, Pause, Skip Forward, Skip Back, Volume Up, Volume Down.
• Can control next song, pause, and play from the Bluetooth speaker. The built-in mic allows you to speak through the device so you can make and receive phone calls hands-free. Rugged and Shockproof! Rubberized impact-resistant silicone feet.

User questions & answers

Question:	I need a new USB recharging cable for this Rockville speaker. Where can I find it
Answer:	Ebay has them very cheap. Or probably a Dollar General or similar store. The regular electronic stores rip you off by charging to much.
Question:	Can th8s be paired with more than one speaker? Warranty
Answer:	Yes, it's a TWS speaker. So if you get an identical second speaker, then you can pair them together, to get even bigger sound.
Question:	Does this have a MicroSD card slot/reader
Answer:	I don’t think there’s microSD card reader with Bluetooth speaker....no microSD!
Question:	can you preset stations on radio
Answer:	IF YOU INTEND to use this outside, DONT BUY IT. PERIOD!!! VOLUME LOW, RECEPTION WEAK, Its rated at 30 watts. Only in the bathroom where it echoes ten times multiplied by3 watts =equals 30

Product features

Rockville RPB27 20w Rugged Portable Waterproof Bluetooth Speaker w Bumping Bass

The RPB27 is a portable Bluetooth speaker that is the perfect size and power. This speaker is big enough that our engineers were able to get the speaker to produce 20 watts of power with huge bass! It is small enough to bring it with you camping, hiking, or anywhere else. The speaker is extremely rugged! It is shockproof and IPX6 water resistant. This means you can throw it around and bring it in the shower and the speaker will never break!

There may be some similar looking Bluetooth speakers on the market but this is the only speaker at this price point that is rugged, water resistant, and has huge power with huge bass!

Below is what makes ours better:

IPX6 Water Resistant: The RPB27 is water resistant, or splash proof. You can take it with you into the shower, or by the pool side. In reality this speaker can be thrown into water without getting damaged, but we are rating it as splashproof. I tested it in the shower and put it under the showerhead with no problems.

Amazing Power with Bumping Bass! This speaker puts out a huge 20 watts of power. Its louder than any other speaker I have tested that was similar in size. I’ve tested many Bluetooth speakers, and this one sounds better than speakers that are way bigger! Our sound quality is amazing. This speaker has great bass and crystal clear highs with a distortion rating of less than 1%. What makes the bass so loud is that the speaker has a passive radiator to enhance the bass. That basically mean the speaker has an extra subwoofer built in that focuses on playing back bumping bass!

Rugged Design: Built with 100% ROHS Silicone & ABS, this enclosure design delivers top of the line sound quality. It includes rubber feet for great sound when placing the speaker on any hard surface. The design mold is an exclusive Rockville design!

Huge Battery Life: This is a big advantage with our unit. We use a high quality original 1,000 mAH battery rated for up to 18 hours of playback at 50% volume.

Amazing Bluetooth Integration: This uses the latest and most reliable Bluetooth chip. It has Bluetooth 4.1 technology with enhanced data rate and a range of 40 feet! This guarantees a crystal clear signal even when you are away from the unit. Pairing your phone or other Bluetooth enabled device is super easy! There is no password required. Simply turn the unit on and it automatically connects to your device.

Features:

• Package Includes: Rockville ROCKBOX 6.5" 100 Watt PortableRechargeable Bluetooth Speaker w USB/SD. Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w Cables. Includes: 6.5 Powered Bluetooth Speaker. Power Cable. Owners manual. Warranty. What is the Rockbox?. The Rockbox can play for 24 hours straight! Its 6000 mAH battery is 500% stronger than most our competitors.. The loudest 6.5 battery-powered Bluetooth speaker on the market
• No distortion even with the volume and bass turned to the max!. The Rockbox is a multi-purpose speaker that is light-weight, portable, and good looking.. Applications: Home use. Karaoke. House parties. Computer speaker. Beach. Camping. Take it to the park. Hear music while playing sports. Features: Rockville ROCKBOX 6.5" 100 Watt Multi-Purpose Portable Powered Bluetooth Speaker w/USB/SD/Radio
• Rechargeable 6000mAH lithium battery lasts 24 hours (exact battery operation depends on volume, and what source you are using, but this battery is about 500% larger than our competitors). 100 Watts Peak Power / 50 Watts Program Power / 25 Watts RMS Power. Built in Bluetooth to stream your music wirelessly (65 foot range!). Built in USB music playback (supports up to 16 GB) (USB will also charge your phone or other device). Built in SD card playback (supports up to 32 GB). 3.5MM Aux input
• Mic input. Built in FM radio tuner with memory presets (Radio requires an aux cable to be plugged in to get reception). Volume control, bass, treble, mic volume control, and echo control knobs. Frequency response: 40HZ 18KHZ. 6.5" woofer and 1" tweeter built in. On-the-go system is perfect for the beach, bedrooms, bathrooms, work, computer speaker, and more. Enclosure is made of high quality ABS material that is very durable and can take a good beating
• No distortion even at max level listening!. Digital LCD display screen. Built in highly efficient amplifier puts out a lot of power and draws very little current from the battery. Metal grille to protect the speakers. Distortion: ?0.5%. Unit dimensions in inches: 10.12 x 13.82 x 7.4. Unit Weight: 5.9 LBS. Shipping Dimensions in inches: 12.6 x 10.2 x 14.57. Shipping Weight: 8.16 LBS

Product features

Rockville ROCKBOX 6.5" Rechargable Portable Bluetooth Karaoke Speaker+Microphone

• Rockville ROCKBOX 6.5" 100 Watt Multi-Purpose Portable Powered Bluetooth Speaker w/USB/SD/Radio
• Rechargeable 6000mAH lithium battery lasts 24 hours (exact battery operation depends on volume, and what source you are using, but this battery is about 500% larger than our competitors)
• 100 Watts Peak Power / 50 Watts Program Power / 25 Watts RMS Power
• Built in Bluetooth to stream your music wirelessly (65 foot range!)
• Built in USB music playback (supports up to 16 GB) (USB will also charge your phone or other device)
• Built in SD card playback (supports up to 32 GB)
• 3.5MM Aux input
• ¼” Mic input

Features of RMC-XLR:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!
• Mic Features:
• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB
• Case Features:
• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Product description

Description of RTB12A:

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

Description of RWK10: The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge.

• Package Includes: Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote, Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables.
• Features of RTB12A: Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote, 600 Watts Peak/300 Watts RMS, 10“ High power woofer in vented tubular enclosure, Integrated, built-in 300 Watts RMS Rated amplifier, Rear aero vent bass system, Speaker level and RCA line-level input.
• Frequency response: 30Hz-200Hz, Sensitivity: 111 dB, Adjustable bass crossover, Dashboard adjustable bass remote control, Molded steel woofer grill, Four steel mounting brackets + two canvas straps with Velcro fasteners, Tube is covered in durable aviation grade tweed with embroidered logo, Dimensions: 12.75” x 22.83“.
• Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17' 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3' 10 Gauge Clear SuperFlex Ground Wire.
• Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets , Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

User questions & answers

Question:	Is it waterproof?? Does anyone have one on there boat
Answer:	The SM-SH51 Cleats that the pedals come with have a 5° Float
Question:	What connector is needed for high level inputs
Answer:	I recommend another peddle which is better for regular shoes and bike shoes: Shimano PDT400 Clickr Pedal. I have had both and have fallen many times with the PD-M540 but none with the PDT400. The PDT400 also has a plastic platform around it to support regular shoes. The two have a similar design but the PDT400 is a later model and is easier to get in to and out of.
Question:	Does it come with amp
Answer:	Yes they do, there two different kinds of cleats, these are the ones that only release by rotating the heal outward. The other type of cleat releases in multiple directions, I personally don't care for them.
Question:	Do i still need to buy an amp or not for it
Answer:	Average Weight 352g (pair)Series SHIMANOPedal System SPDSPD Cleat Surfaces both surfacesSpindle Thread BC 9/16" x 20 T.P.I.Spindle Material chrome-molyCartridge Spindle yesCleat Retention Indicator yesCleat Retention Adjuster yesMud Shedding Design yesPedal Body Material aluminum / barrel finishReflector SM-PD22

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote+Amp Kit

Package Includes:

• Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote
• Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RTB12A



Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.



"Good things do come in small packages" Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.



Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim…experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.



Features:

• Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote
• 600 Watts Peak/300 Watts RMS
• 10“ High power woofer in vented tubular enclosure
• Integrated, built-in 300 Watts RMS Rated amplifier
• Rear aero vent bass system
• Speaker level and RCA line-level input
• Frequency response: 30Hz-200Hz
• Sensitivity: 111 dB
• Adjustable bass crossover
• Dashboard adjustable bass remote control
• Molded steel woofer grill
• Four steel mounting brackets + two canvas straps with Velcro fasteners
• Tube is covered in durable aviation grade tweed with embroidered logo
• Dimensions: 12.75” x 22.83“

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RWK10

 

The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!



Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing. The resistance per foot of this kit is extremely low compared to any other amp kit in its range. The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit. We were more shocked than anyone about these tests, because we used to sell some of those amp kits. (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes set of RCA cables.

Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Product description

The HOUSE PARTY SYSTEM 10 by Rockville is an all in one audio system perfect for house parties, block parties, and casual listening. It comes with everything you need to rock the block!Loud premium soundThe sound quality of this system is premium. The bass is extremely thumpy and loud and the mids and highs are clean sounding. This system was engineered to have very balanced sound. With 250 watts of true RMS you have enough power to use them outdoors and be heard from an entire block away. The amazing sound is due to a true stereo bi-amplification system. There is a separate amp for bass and a separate amp for the highs and mids. We designed this speaker to be 3-way where you have a 10” woofer for lows, a 5” midrange for the mids and vocals, and a 3” large size tweeter for the highs. All the frequencies are balanced and can be heard loud and clear.Tons of playback options that rockWe added all the features you need whether you want to throw a party or just chill out after a long day. The House Party 10 uses a long-range Bluetooth chip that works up to 70 feet away without dropouts or unwanted distortion. You can also play back your tracks through the USB or SD card input. We added an FM radio as well.Inputs/OutputsThis is very important when buying a speaker system. We include sets of RCA inputs which allows you to hardwire a phone, mp3 player, ipad, television, etc. There is 3.5 MM aux input which also allows you to connect any audio device. There are ¼” microphone inputs with echo and mic volume control so you can MC your party, sing karaoke, make announcements, give speeches, etc. We also added optical and coaxial inputs so you can wire your television even if you don’t have an RCA output on your TV.RGB lightsThis system has RGB LED lights on both speakers that sync to the music and each other with an on/off switch in case you want to turn them off.

• What's in the Box: Speakers, 15 ft cable to connect the active/passive speaker, Remote, 6 ft. Power cord, FM antenna, Owners-manual, Warranty card
• Features: Rockville HOUSE PARTY SYSTEM 10" 1000w 3-Way Powered Bluetooth Home Speakers/LED, Complete all in one home theater party system, 1000 Watts Peak Power, 250 Watts RMS power
• Built in USB playback (supports 32gB), Built in SD card playback (supports 32gB), Built in FM radio with Antenna, 10” subwoofers with incredibly loud and deep bass response, “ Mid-range speakers give you incredible mids and vocal sounds
• Adjustable bass and treble, Cabinet material: Top quality MDF (0.59” inch thick), Stereo RCA inputs, 3.5MM aux input, 1/4" Mic inputs for Karaoke with Volume/Echo control and mic volume control, Optical input, Coaxial Input
• Power supply: AC 115/230V, Frequency Response: 40Hz-20Khz, S/N Ratio: =60dB, Max SPL: 115dB, Dimensions of each speaker(inches):15"(W)*23.6"(H)*11.8"(D), Net Weight of both speakers combined: 66 LBS

Product features

Rockville HOUSE PARTY SYSTEM 10" 1000w Bluetooth LED Booming Bass Home Speakers

What's in the Box:

• Speakers
• 15 ft cable to connect the active/passive speaker
• Remote
• 6 ft. Power cord
• FM antenna
• Owners-manual

Product description

Package Includes: Rockville RSG15 3-Way 8-Ohm Passive DJ/Pro Audio PA Speakers Totaling 3000W Rockville SBG1158 Passive Pro DJ Subwoofers Totaling 1600W Rockville RSP20 20 Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel Video of RSG15: Description: We are proud to introduce to you the Rockville RSG series of speakers. These are affordable speakers with high-end performance; specially built for DJ's as well as professional audio applications. After conducting strategic market research, Rockville is proud to bring you this new line of speakers that were engineered to combine incredible power handling, superior sound and unbelievable build quality. The goal was to create a line of passive DJ speakers that were double as good as the competition but cost half as much. The Rockville RSG-15 speaker system features a high quality 15 low frequency woofer with four electronic, high-efficiency piezo bullet tweeters and one high efficiency piezo compression horn tweeter that provide a true full-range of sound. This speaker produces an incredible amount of power. 1500 Watts peak, 1000 Watts

• Package Includes: Rockville RSG15 3-Way 8-Ohm Passive DJ/Pro Audio PA Speakers Totaling 3000W. Rockville SBG1158 Passive Pro DJ Subwoofers Totaling 1600W. Rockville RSP20 20" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel. Features: Rockville RSG-15 Carpeted Passive Loudspeaker. Single 15 Pro Audio Woofer. Piezo 3" Bullet Tweeters
• High Efficiency Piezo Compression Horn. RMS Power: 750 Watts. Program Power: 1000 Watts. Peak Power: 1500 Watts. 2.5 High Temperature Aluminum Voice Coil. 8-Ohm Impedance. Sensitivity: 102dB @ 1w/1m. Frequency Response: 40Hz - 22 kHz. SpeakON Input connection. In/Out connections (Parallel). Dimensions: (20.5+13.2)x13.8x29.5in. Weight: 39.24Lbs. Pole Mountable. Rubber Isolating Feet
• Construction: Top quality MDF - Stapled, Bonded & Braced. Rockville SBG1158 15" 800 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable. 15 Pro audio woofer. 400 Watts RMS / 600 Watts Program / 800 Watts Peak. 3 High temperature aluminum voice coil. 70 oz magnet woofer. Ported Enclosure for Improved Bass Response
• Construction: High-Density, High-Quality Non Resonant MDF wood - Stapled, Bonded & Braced. Ergonomic Recessed Handles. Molded Steel Grill. Aviation Grade Black Carpet. Pole Mountable. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4" Jack (In/Out). SpeakON (In/Out). All input/output connections are internally connected in parallel. Nominal Impedance: 8 Ohm
• Sensitivity: 94dB @ 1w/1m. Frequency Response: 20Hz - 500Hz. Dimensions (W x D x H): 18 x 17 x 20. Weight: 44 lbs. Features of RSP20: Rockville RSP20 20 Mounting Pole from Subwoofer to PA Speaker. 200 Lb Load Capacity. 20" Mounting Pole. Pole diameter: 1.38" inches (35mm)

User questions & answers

Question:	How much does it weigh
Answer:	Each speaker is about 15-20lbs. Very lightweight.
Question:	What amp or amps should I use to coonect this setup
Answer:	any decent house stereo receiver will work. i currently have my running through a mixer. just remember if you want good sound you will want the watts to push them. If your'e going to use a stereo receiver you may want to get an equalizer. they sound fantastic.
Question:	What class speakers are these
Answer:	Pa sound system, commonly used for announcements
Question:	What kind of an amp would I need to run this set up? Please help
Answer:	I bought a 3000 watt GTD audio amp. So I would say at least a 2000 watt amp.

Product features

2) Rockville RSG15 15” 3000w Passive DJ/Pro Audio PA Speaker+(2) 15" Subwoofers

• Rockville RSG15 3-Way 8-Ohm Passive DJ/Pro Audio PA Speakers Totaling 3000W
• Rockville SBG1158 Passive Pro DJ Subwoofers Totaling 1600W
• Rockville RSP20 20" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel

Features of RSG15:

• Rockville RSG-15 Carpeted Passive Loudspeaker
• Single 15” Pro Audio Woofer
• Piezo 3" Bullet Tweeters
• High Efficiency Piezo Compression Horn
• RMS Power: 750 Watts
• Program Power: 1000 Watts
• Peak Power: 1500 Watts
• 2.5” High Temperature Aluminum Voice Coil
• 8-Ohm Impedance
• Sensitivity: 102dB @ 1w/1m

Features of SBG1158:

• Rockville SBG1158 15" 800 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable
• 15” Pro audio woofer
• 400 Watts RMS / 600 Watts Program / 800 Watts Peak
• 3” High temperature aluminum voice coil
• 70 oz magnet woofer
• Ported Enclosure for Improved Bass Response
• Construction: High-Density, High-Quality Non Resonant MDF wood - Stapled, Bonded & Braced
• Ergonomic Recessed Handles
• Molded Steel Grill
• Aviation Grade Black Carpet
• Pole Mountable
• Rubber Isolating Feet

Features of RSP20:

• Rockville RSP20 20“ Mounting Pole from Subwoofer to PA Speaker
• 200 Lb Load Capacity
• 20" Mounting Pole
• Pole diameter: 1.38" inches (35mm)

Product description

The Skar Audio SDR-15 D2 15" dual 2 ohm subwoofer was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, this woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros. The SDR series features a 2. 5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1200 watts and a RMS power rating of 600 watts. Sensitivity: 85.9 dB, Frequency Response: 20 - 250 Hz, Qts: 0.67, Xmax: 13. 5 mm, Fs: 29 Hz, Bl: 16.36 n/a. Dual 2-ohm Voice Coil Configuration.

• 15-Inch Dual 2-ohm Car Subwoofer
• Peak Power: 1,200 Watts | RMS Power: 600 Watts
• 2.5" 4-Layer High Temperature Copper Voice Coil
• High Roll Foam Surround and Competition Grade Pressed Paper Cone
• Frequency Response Range: 20 Hz - 250 Hz | Sensitivity: 85.9 dB
• High Flux Ferrite Motor | Advanced Air Flow Cooling Design

User questions & answers

Question:	Is this subwoofer better, worst, or the same compared to the rockford p
Answer:	I'm sorry, I know it's been a few months but I would like to make a correction and it's one which I know for sure I'm right you can't beat the P3 Rockford fosgate makes some of the best subwoofers and starting with the P3 all the way up past the t3 you get a very good product
Question:	What would hit harder this or 2 of the skar ix-12 d
Answer:	Just one of these? Depending on what amp you are running and how it is tuned. You can make 1 15 sound like 3 12s if they are in the right car and tuned properly.
Question:	Will these fit under a 2019 Ford F-250 seat
Answer:	It should fit depending on what box you put it in and if you're talking about the rear bench seat, it definitely won't fit under the front seat. There are special made enclosures you can find that are meant to go under the seat.
Question:	Whats the mountung depth
Answer:	6.08"

Product features

Technical Specifications

• Dual 2 Ohm Voice Coil Configuration
• Peak Power: 1200 Watts
• RMS Power: 600 Watts
• Competition Grade Pressed Paper Cone
• 2.5" High Temperature Copper Voice Coil
• Frequency Response: 20 Hz - 250 Hz
• Sensitivity: 85.9 dB
• Xmax: 13.5 mm
• Mounting Depth: 7.62"

Product description

Skar audio developed the ix series 10-inch subwoofers to be the most powerful, affordable, and reliable drivers in their power class. The ix series is the perfect solution if you're looking for a price friendly, affordable, and clean subwoofer setup in your vehicle. Featuring a single slug premium ferrite magnet, combined with a two-inch high quality voice coil, the driving force behind this conservatively rated woofer line raises industries standards in what to expect out of a driver in this class. This ix subwoofers were designed to be both extremely efficient as well, and work great in both vented and sealed applications. Conservatively rated and built like all of our other subwoofer products, only the highest-grade components are used in the assembly of the ix drivers. Dual 2 ohm voice coil. RMS power : 200 watts, max power : 400 watts, fs : 35.7 Hz, re : 4.0 Ohms, SPL : 86.3 Db, QMS : 6.41, QTS : 0.55, QES : 0.6, RMS : 3.0 Kg/s, CMS : 0.23 Mm/n, mms : 86.4 G, NREF : 0.27%, BL : 11.4 Na, vas : 37.2 L, le : 32.6 MH, XMAX: 6mm one-way.

• 10-Inch Dual 2-ohm Car Subwoofer
• Peak Power: 400 Watts | RMS Power: 200 Watts
• 2" BASV Premium Voice Coil | Advanced Air Flow Cooling Design
• High Strength Pressed Paper Cone and Foam Surround
• Frequency Response Range: 28 Hz - 325 Hz | Sensitivity: 86.2 dB
• Subwoofer Mounting Depth: 4.85"

User questions & answers

Question:	Will it fit a regular box
Answer:	Yes , no problem at all .
Question:	does these speakers come in single voice coil
Answer:	Not this model. But you can wire this in series or parallel it’s not necessary to use 2 Ch’s of a amp
Question:	Can you hear these from a block away or no
Answer:	That would depend on what level of clearness you classify as “hearing them” and what amplifier you used to power it and whether the enclosure was ported or sealed and if the windows of the car are down or not. With these factors in mind I think with enough planning and effort it is possible for the sound produced by these woofers to reach far beyond a one block radius.
Question:	What is the mounting depth
Answer:	4.85 inches

Product features

Technical Specifications

• Dual 2 Ohm Voice Coil Configuration
• Peak Power: 300 Watts
• RMS Power: 150 Watts
• Pressed Paper Cone
• Advanced Air Flow Cooling System
• 2" BASV High Temperature Copper Voice Coil
• Motor Weight: 30 oz
• Frequency Response: 28 - 325 Hz
• Sensitivity: 83.0 dB

Product description

New Rockville SBG1188 18" 2000 Watt Passive Pro DJ Subwoofers Subs

• Features: Rockville SBG1188 18" 1000 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable. 18 Pro audio woofer. Power Rating : Peak Power Handling : 2000 Watts (1000 Watts per Subwoofer)
• Program Power Handling : 750 Watts. RMS Power Handling : 1000 Watts (500 Watts per Subwoofer). 3 High temperature aluminum voice coil. 90 oz woofer magnet
• Dual Ported Enclosure for Improved Bass Response. Construction : High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced. Ergonomic Recessed Handles. Molded Steel Grill
• Aviation Grade Black Carpet. Pole Mount. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4 Jack (In/Out). SpeakON (In/Out)
• All input/output connections are internally connected in parallel. Nominal Impedance : 8 Ohm. Sensitivity : 96dB @ 1w/1m. Frequency Response : 20Hz - 500Hz. Dimensions (W x D x H) : 23 x 18 x 26

User questions & answers

Question:	Can i run these with 2 spgn 158 speakers in bridges mono with a rpa9 3000 watt amp
Answer:	Yes you can.
Question:	What is the Warranty
Answer:	I think it was 90 day's.
Question:	How far do these subs throw
Answer:	That's a tough question to answer because there is no unit of measure to gauge by. But, I will say this. I use them for my PA for my band. I run them in series with a pair of JBL Eon 305's and my PA has 400 watts per channel. They make a nice difference compared without them, but they don't shake objects off the shelves either. They are a good value for the money.
Question:	Do i need to hook up an amplifier
Answer:	hello,i connected my booth new Rockville to profetional power amplifier, now are connecting in paralel form, thanks

Product features

2) New Rockville SBG1188 18" 2000 Watt Passive Pro DJ Subwoofers Subs

• Rockville SBG1188 18" 1000 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable
• 18” Pro audio woofer
• Power Rating :
• Peak Power Handling : 2000 Watts (1000 Watts per Subwoofer)
• Program Power Handling : 750 Watts
• RMS Power Handling : 1000 Watts (500 Watts per Subwoofer)
• 3” High temperature aluminum voice coil
• 90 oz woofer magnet
• Dual Ported Enclosure for Improved Bass Response
• Construction : High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced