12 best seismic audio active pa speakers

Product description

Portable Powered 15 Inch PA or Karaoke PA Speaker System Model: PAIO15 | Pair of 15" Speakers (1 Active, 1 Passive), Pair of Speaker Stands, Wireless Microphone, 20' Speakon Speaker Cable, Power Cord, Bluetooth Remote Control.. Power Ratings: 500 Watts RMS; 1000 Watts Program; 2000 Watts Peak. Class A/B High Powered Amplifier | 15 Inch Woofer with a 30 oz Magnet and 2 Inch Voice Coil per Cabinet | 1" Tweeter per Cabinet. Nominal Impedance: 4 Ohms | Frequency Response: 45Hz - 18kHz | Sensitivity: 98 dB. Built In 2 Band EQ l Built In Bluetooth | Built-In USB (2.0)/SD/MMC/MP3 | FM Built in | Connector(s): XLR, 3.5mm, RCA. Wireless Remote Included to control MP3 functions. Wireless VHF Microphone Included | 260.3 mHz Range. Injection Molded Polypropylene Enclosure with side handle. 20 Foot Speakon speaker cable to connect speakers | Power Cord included. Pair of heavy duty Speaker Stands also Included in this package. Dimensions: 16" x 13.5" x 26" per Cabinet. Weight: Active Speaker: 26.2 lbs | Passive Speaker: 22.3 lbs. Warranty: One Year WarrantyThe PAIO15 is the complete portable, party, or karaoke PA System. This package has everything you need for a professional PA setup to get the party started and keep it going. In this package you get two 15" PA/DJ speakers, one active and one passive. The active speaker has a built in amplifier to power the passive. A 20' Speakon cable is included to connect the two speakers. Combined, these speakers put out an amazing 1600 watts of power. Also included in this package is a pair of Speaker Stands, a Wireless Microphone, Remote Control and Power Cable. This package is truly all-in-one and has everything you need.

• Model: PAIO15 | Pair of 15" Speakers (1 Active, 1 Passive), Pair of Speaker Stands, Wireless Microphone, 20' Speakon Speaker Cable, Power Cord, Bluetooth Remote Control.
• Power Ratings: 500 Watts RMS; 1000 Watts Program; 2000 Watts Peak
• Class A/B High Powered Amplifier | 15 Inch Woofer with a 30 oz Magnet and 2 Inch Voice Coil per Cabinet | 1" Tweeter per Cabinet
• Nominal Impedance: 4 Ohms | Frequency Response: 45Hz - 18kHz | Sensitivity: 98 dB
• Built In 2 Band EQ l Built In Bluetooth | Built-In USB (2.0)/SD/MMC/MP3 | FM Built in | Connector(s): XLR, 3.5mm, RCA

User questions & answers

Question:	I need at least 2 more wireless microphones. What would you recommend to work with this system
Answer:	These work great. Got them at Amazon too. innopow Metal Dual UHF Wireless Microphone System,inp Metal Cordless Mic set, Long Distance 150-200Ft ,16 Hours Continuous Use for Family Party,Church.
Question:	Anyone have an idea how well this would work in a church of about 50 people
Answer:	Well , it depends how large the building is. But for a 50 X 80 enclosed space is far more than enough.
Question:	PA system with 2 speakers w/ stands, wireless mic, plenty of power for track meet announcing - but yet not $2500 kind pro track uses
Answer:	The PAIO15 might barely cover this distance of a football field, but to make announcements over the volume of any crowd, I don't think these will suffice. Thanks, Rusty
Question:	Can I connect a pair of rockville speakers to this? so I can have
Answer:	Yes you Can But they cant all be in line. You will need a left and right

• The item is non-returnable
• Model - Aftershock 18
• 18" Subwoofer - 90 ounce magnet, 3" Voice Coil
• 8 Ohms, 98 db. - Plywood Construction
• Line Output/Input - 1/4" and XLR Combo Jack, Low Pass Filter, Clip and Power Light; Can Be Daisy Chained

User questions & answers

Question:	What genre of music sounds best playing through this sub
Answer:	This is a subwoofer. It only creates the low tones. It is designed to make the bass drum punch harder to great a bigger pressure wave that you feel in your chest. Any kind of music where the pulse of the bass drum is meant to be felt is the optimal type of music for this speaker. This differs from the Tremor in that it has a more powerful amplifier so you music can be louder.
Question:	Is anyone else not getting any where near enough power out of it? What is the solution? These things put out less bass than my 8" studio monitors
Answer:	I strongly suggest that you call Seismic Audio's Customer service at 1-877-347-6423, I'm so sure they will gladly help you with whatever issues you may be having with your Aftershock speaker. After getting all kind of recommendations from "audio experts" all around I finally called this people and that was it and no charge. Gilbert.
Question:	i just bought this and I'm new to all this dj stuff when connecting this to a PA system do i need a cable that connects into the left and right input
Answer:	Hi Michael,Thanks for your purchase of the Seismic Audio Aftershock-18 powered 18" subwoofer. You do not have to input into both the Left and Right XLR-1/4" combination inputs, but you will command more performance from the sub if you do. If your mixer has a Left and Right line-level main outputs, you can run from those to the inputs of the Aftershock sub, then "daisy chain" from the XLR outputs to your corresponding full range "main" speakers, assuming they are also powered units. Depending on the make and model of your mixer, you may also be able to connect the Aftershock to an Auxiliary or Monitor output of your mixer, and control the volume level of the sub independently of the "mains". Sometimes this method is preferred so you can cut or boost the bass to that particular crowd's preference. Give us a call and we can discuss this further and we also have a FAQ sheet available for the Aftershock.Thanks,Rusty
Question:	If i only have a mono input, do i use the left and it automatically counts for right? or do i need to jump the signal back to the other input
Answer:	Hi BPK,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! If you have a mono output from your mixer, you can input into the Left XLR-1/4" combination input on the Aftershock, then output from the Left XLR output and input back over to the Right XLR-1/4" combination input, effectively daisy chaining the sub to itself. It may be better to split your signal instead, turning your one mono signal into 2, thus allowing to you to input into both the Left and the Right without having to daisy chain the sub to itself. If using XLR cables, you could use a splitter like this:http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=seismic+audio+sa-y2We also have these available in 3 and 5' versions. Let us know if you have any questions.Thanks,Rusty

Product features

Seismic Audio 18" Powered Subwoofer Cabinet

Our powered 18-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 18-inch woofer and 800 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a powered 18" subwoofer cabinet pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Aftershock 18

This listing is for an 18" pro audio powered subwoofer cabinet. You will receive one powered 18" pro audio subwoofer pictured and described above. This high-performance, active subwoofer speaker system was designed with larger PA or DJ settings in mind. The Aftershock-18 powered subwoofer cabinet provides the power and performance you need. This powered subwoofer yields powerful deep bass reproduction and tight low end. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.

Back Panel

The Aftershock-18 rear panel is outfitted with two 1/4" inputs, two power speakon outputs, a three-band equalizer, volume control and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Protective Hardware

Heavy-duty, rugged hardware protect our Aftershock-18 sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Aftershock-18 comes with a pole mount in order to mount main speaker cabs elevated above.

Heavy-Duty Recessed Handles

In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Class AB Amplifier for PA/DJ Speaker Cabinets Model: SA-APT002. Contents: 250 Watt RMS Class AB Plate Amplifier. Amplifier Type: Class AB. Power Rating: 250 Watts RMS; 500 Watts Peak. Controls: Master Volume Controls | Treble, Mid, Bass | Gain Control. Line Input: 1/4 and XLR Combo Jack | 1/4 Inch | 1/8 Inch (3.5 mm). Line Output: XLR. Protection: Overload Protection, Over Current Protection, Short Circuit Protection. Features: 3 Band Equalizer (Treble, Mid, Bass) | One Speakon Satellite Power Output. Voltage Changeover Switch: 115V/230V. Dimensions: 15" x 6.25" x 3.15". Weight: 9.5 lbs. Condition: New. Warranty: One Year WarrantySeismic Audio's line of Plate Amplifiers gives you the ability to build your own powered speaker cabinets and powered subwoofer cabinets. The SA-APT002 is a Class AB amplifier designed for loudspeaker enclosures. It has a power rating of 250 Watts RMS and 500 Watts Peak. This plate amplifier offers a Speakon Power output to power a Satellite speaker. This amp also has 3 Band EQ as well as Gain and Master Volume controls. When paired with the right speaker driver and enclosure, these plate amplifiers produce the loud, clear, and clean sound to reinforce your PA loudspeaker system. With your purchase, you will receive one 250 Watt Plate Amplifier pictured and described above.

• Model: SA-APT002
• Contents: 250 Watt RMS Class AB Plate Amplifier
• Amplifier Type: Class AB
• Power Rating: 250 Watts RMS; 500 Watts Peak
• Controls: Master Volume Controls | Treble, Mid, Bass | Gain Control

User questions & answers

Question:	What are the dimensions of the plate
Answer:	Hi,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! These SA-APT002 should have dimensions of 15" x 6.25" x 3.5" (HxWxD). I believe the mounting dimensions are 14.25" x 6" x 3.5" (HxWxD).Thanks,Rusty
Question:	What is the rms output when you attach it to an 8 ohm speaker using the speakon connector
Answer:	Hi Robert, The Speakon Satellite output is stable down to 8 Ohm and is outputting 250W RMS. This will not draw power away from the amp's main full range output, also 250W RMS at 8 Ohm. Thanks, Rusty
Question:	Is this amp 2ohm stable
Answer:	I have no idea, I didn't try it with that. But I'd be hesitant to risk it. Frying amps is a very unpleasant experience.
Question:	Is the speaker output for a none amplified speaker
Answer:	This is an amplifier. The speaker wires on the back are for non-amplified speakers. The XLR output is to share the incoming signal with powered speakers. Have a great day!

Product description

Powered 10" PA/DJ Subwoofer Cabinet - Model: Really-Mini-Tremor, Condition: New, Application: Subwoofer/PA Subwoofer/DJ Subwoofer, Active/Passive: Active, Woofer: 10", Woofer Specs: 50 oz. Magnet and 2" Voice Coil, Frequency Response 50 Hz - 300 Hz, Power: 250 Watts RMS; 500 Watts Peak, LPF 40 Hz - 150 Hz, Connectors: Two Line Input/output - XLR Combo / Male XLR, Nominal Impedance: 8 Ohms, Amplifier: Class AB, Features: Can be Daisy Chained / Low Pass Filter Adjustment / Polarity Switch: Normal / Inverted, Grill: Powder Coated Full Metal Grill, Handles: Recessed Handles, Covering: Black Carpet, Enclosure: 5/8" Plywood front panel, Pole Mount: Yes, Volume Control: Yes, Height: 15.75", Width: 13.5", Depth: 14.25", Weight: 27 lbs. per Cabinet, Warranty: One Year Warranty. After numerous requests for a 10 Inch Subwoofer, we developed the Really-Mini-Tremor. It may be small, but the bass is big! This is a high performance, compact 10" Active subwoofer. The Really-Mini-Tremor was designed with smaller live sound and DJ setting in mind...compact size with deep bass production, this powered 10" subwoofer can drop the bass! The Really-Mini-Tremor subwoofer cabinet houses a 10" Woofer that operates at 250 Watts RMS and 500 Watts Peak Power and reproduces low frequencies down to 40 Hz. The built in amplifier makes it the perfect all in one solution to any PA application, whether it be Clubs, DJ, party's, weddings, or Church events. The Mimi-Tremor 10 Inch Active Subwoofer also contains a pole mount to accommodate a satellite speaker for optimal full range PA performance.

• Model: Really-Mini-Tremor
• Condition: New
• Application: Subwoofer/PA Subwoofer/DJ Subwoofer
• Active/Passive: Active
• Woofer: 10"

User questions & answers

Question:	Can I use this as a powered extension speaker/monitor for my acoustic amp
Answer:	Hi, This Really-Mini-Tremor is a powered 10" subwoofer, so if you are looking to increase your low end response of your acoustic guitar, and your current amp has a line-out, then yes you can connect to this Really-Mini-Tremor. This RMT has an XLR female-1/4" TRS combination input jack. that will accept either a male XLR plug, or a 1/4" TRS. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	I have this speaker . Can I daisy chain an unpowered sub to it? Or does it have to be a powered sub
Answer:	Hi, This sub can only be daisy chained to other powered subs or pa speakers. It does not have power built in to power a passive sub.
Question:	Anyone know true rms power on this cause I have it and it’s not even rumbling
Answer:	Hi, The Really-Mini-Tremor are rated 250W RMS. If you are experiencing issues with your Really-Mini-Tremor, please give us a call at 1.877.347.6423. We are available Monday - Friday from 9 AM to 4:30 PM CST to go over some troubleshooting steps with you to determine what could be causing the issue with the performance of your Really-Mini-Tremor. Thanks, Rusty
Question:	What connection formats are the inputs & outputs
Answer:	Hi, The Really-Mini-Tremor powered 10" subwoofer has an XLR Female-1/4" TRS combination input jack, which will accept a line-level Male XLR plug or a 1/4" TRS (mono balanced) type signal from a mixer. The RMT has an XLR male output jack. This output will pass through the original signal you feed into the RMT. The RMT does have a volume control knob and a Low Pass Filter (LPF) knob that will control the 10" subwoofer, but they will not affect the original signal you feed into the RMT, and this original signal will be passed through via the XLR Male output. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

Product description

10inch Wedge Floor Stage Monitor or Speaker - Model - SA-10MSingle, 2-way 10inch pro audio speaker with 40 oz magnet and 2inch voice coil, 100 watts rms and 200 watts peak, 4x8 piezo horn tweeter, two 1/4inch inputs, Frequency Response: 45 to 20,000 hz, Wired at 8 ohms, 95 db, Dual ports, 18 gauge full face steel grill, Black Metal Corners, Pocket Handles, 13.25inch wide by 14inch tall x 21inch deep, Weight: 22 lbs per monitor, This monitor is brand new., One year warranty. It’s important that you can hear your music on stage. These 10 inch monitors deliver every sound clearly with a Pro Audio 10 inch speaker, 4"x 8"piezo horn tweeter, a frequency response of 45Hz to 20,000Hz, and 100 watts RMS, 200 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive one of these monitors pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Model - SA-10MSingle
• 2-way 10inch pro audio monitor with 40 oz magnet and 2inch voice coil
• 100 watts rms and 200 watts peak
• 4x8 piezo horn tweeter
• Input terminal with two 1/4inch inputs. Dual ports. One year warranty.

User questions & answers

Question:	Will it work on a yamaha EAD10 module for drums
Answer:	Hi,Yes it can however, you would need to have an external power amp to power the speaker as this is not a powered speaker and the drum kit will not provide the wattage or power to produce the speaker sound. Thanks
Question:	can this be used electronic drum kits
Answer:	Hi Lindsay, Mr. KenBJammen's comment is pretty much spot on. These SA-10M will be suitable for smaller venues and are ideal for monitoring vocals and guitars. As a drummer myself, I mostly want bass and rhythm guitar in my monitor, with other instruments sort of "salt and peppered" into my monitor mix. If you find that you also prefer to have more bass and rhythm in your mix as well, then you may be better served by a stronger 15" monitor, such as our SAX-15M or FL-15MP. The SAX-15M is visible on Amazon at the moment, but the FL-15MP are currently out of stock. Also consider, these monitors are passive and you will require a separate power amplifier to power them. If you do not select a suitable rated amplifier, in terms of the wattage, then you end up underpowering (or overpowering) the monitors and in either case, this will lead to blown woofers and tweeters. You may also want to consider a powered a.k.a. active monitor, with the amplifier already built in, but this all depends on any existing equipment you have and plan to use. Feel free to email us directly at [email protected] if you would like any additional information or have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment, so make sure to email us directly. Thanks, Rusty
Question:	Will I be able to hear while I’m playing drums
Answer:	Hello, thank you for your interest in the SA-10m monitor from Seismic Audio. Whether this will work on your stage will depend greatly on which musicians and guitar amps you have. I use this on stage with a fairly loud drummer, but a reserved guitar player with a single 12 combo. If you are dealing with someone with a Marshall half stack that "has to crank it to get his tone" it may not work.
Question:	Can this compete with a full band and guitar amps, if used as a vocal monitor on stage
Answer:	Yes. Has 'XLR in' and 'XLR thru' ports on the back

• Model - SA-15.2  (Set of 2)
• Woofer -15" and each has a 50oz magnet with a 2” voice coil.  300 Watts RMS -600 Watts Peak
• Wired at 8 ohms.  45Hz –20KHz.  Sensitivity: 96 db.  2x5 Tweeter  5/8 plywood front panel
• Steel grill over speaker.  Side Handle.  Terminal cup with two 1/4" inputs.  Can be Daisy Chained
• Mount cup for speaker stands.  One port.  19” tall -16” wide -12” deep

User questions & answers

Question:	What would be an appropriate amplifier to run a pair of these
Answer:	at least 800 watts rms
Question:	are the speakers powerd and can i chain link them with my berhingers
Answer:	Hello Mark, the speakers are passive not powered. I am not sure what your berhingers are so I may not address that part of your question. If you mean set the speakers up in a series, I do not see why not.
Question:	can you play a bass guitar through the speakers and will it handle in bass
Answer:	Hi, You can not connect your bass directly to these SA-15.2 as they are passive 15" loudspeakers. You can connect your bass to a preamp (or bass guitar amp head), to amplify the signal from your bass, then output from the amp and connect to these SA-15.2. Each SA-15.2 is rated at 300W RMS at 8 Ohm. If you "daisy chain" these two speakers together, you will create a 600W RMS at 4 Ohm load. You would need to make sure your amp could support this wattage (600W RMS) at this impedance (4 Ohm). You would also need to use low gauge (12-16 AWG) speaker cable. Each SA-15.2 has a dual 1/4" jackplate, where either jack can be the input, then once the input is connected, the other jack becomes an output for daisy chaining purposes. As far as the level of bass you will get from these SA-15.2, it will certainly be bass you can hear, but these are not subwoofers, so it will not be bass you feel. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	Is it easy to be operated? I hope it will be not too hard to do that
Answer:	…Were very easy to set up, and I just connected to the amplifier and then to the record player.…You can buy this amplifier if you are a lack of it. https://www.amazon.com/Bluetooth-Audio-Amplifier-Integrated-Subwoofer/dp/B07JVFY27T

Product features

Seismic Audio 15" Speaker Cabinets (Pair)

Great for studio or live performances. Whether you have a permanent installation or mobile, this dual speaker cabinet is rugged enough to handle whatever you throw at it - road ready and built to last. The quality of your sound can only be as good as your equipment and this speaker cabinet should not be overlooked. Each cabinet contains one 15" woofer with a 50 oz. magnet and 2" Kapton voice coil each, wired at 8 ohms. This configuration crystal clear sound while rejecting extraneous noise. Each cabinet is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners. These features along with the strap handles on the side and full metal grill make this cabinet fit right in with your other professional equipment on stage. Awesome quality speaker cabinets are very hard to find, especially when low on cash. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. With your purchase, you will receive two 15" speaker cabinets pictured and described above. So, grab one today and get ready for years of trouble-free, crystal clear sound!

SA-15.2

This listing is for a pair of 15" passive speaker cabinets. You will receive two identical speaker cabinets, pictured and described above. Our SA-15.2s are well-suited for use for DJs, as mains, for PA use, keyboards, vocals, studio monitors, and other applications like gigs, weddings and churches, and sound & studio monitors. These cabinets also have pole mounts in the bottom panel. Well-suited for a full PA system.

Jack Plate & Inputs

Our SA-15.2s are outfitted with heavy-duty jack plates that house two 1/4" inputs. This feature enables this speaker cabinet to be easly daisy-chained and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Functional & Protective Hardware

Heavy-duty, rugged hardware protect our SA-155.2 cabinets with a fully metal grille on front, heavy-duty metal corners, and thick, durable rubber feet. These cabs also have pole mount hardware making it easy to elevate.

Heavy-Duty Handles

In order to transport your speaker cabinets easily, our durable strap handles on the left side do the job. The strap handle location enables easy handling and supplements the fast that the SA-15.2s can be used on their side for monitor use.

Product description

Pair of 15" Pro Audio Replacement Drivers - Model #: Seismic Audio - Quake 15, Type: 15" Woofer/Speaker , Power RMS: 250 Watts , Power Peak: 500 Watts , Frequency Response: 50-5K Hz , Sensitivity: 95 db. , Magnet: 50 oz.  , Voice Coil: 2.5" , Impedance: 8 Ohm , Pressed Steel Chassis , Paper cone , Weight: 11 lbs. each, This speaker is brand new. , One year warranty , Listing is for a two woofers, You will receive 2 identical woofers pictured and described above.  Each woofer has the specs listed above, These produce an awesome tone, with great lows and clear, clean highs, Uses include, but are not limited to: Build your own speaker cabinets Replace old woofers .

• Model #: Seismic Audio - Quake 15 (Set of 2)
• Type: 15" Woofer/Speaker.  Power RMS: 250 Watts.  Power Peak: 500 Watts
• Frequency Response: 50-5K Hz.  Sensitivity: 95 db.  Magnet: 50 oz.  Voice Coil: 2.5
• Impedance: 8 Ohm.  Pressed Steel Chassis.  Paper cone.
• These speakers are brand new.  One year warranty

User questions & answers

Question:	I have a pair of 215 black widow PA speakers what would be the best thing to replace with
Answer:	Hi George,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! I think these Quake-15 you referenced could certainly work, but they are not our top of the line 15" replacement woofers. This would be the Denali series, which can be viewed here:Denali-15Pair:https://www.amazon.com/Seismic-Audio-Denali-15-Pair/dp/B004Y6PY16/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1484578643&sr=1-2&keywords=denali-15Either would work, but the Denalis should provide a better overall tone, especially in the bass and mid frequencies.Thanks,Rusty
Question:	What is the hole cut out for this speaker
Answer:	Hi J, The Quake-15 woofers have a cutout diameter of 14 1/8". Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

• Model - Aftershock 18(Pair)
• Subwoofer - 18"
• 90 oz magnet
• 3" Voice Coil
• 800 Watts RMS

User questions & answers

Question:	whats the peak watts on these speakers
Answer:	Thank you for asking. The peak capacity of the woofer is 1000. The amp is rated at 800. Have a great day!!
Question:	do these speakers have a powered out put? if so, what are the max wattage outputs per speaker (without a filter
Answer:	Hi Michael, The Aftershock-18 do have the powered Satellite output function. There are two female Speakon jacks toward the center of the amplifier section on the back of these Aftershock-18. Each Satellite output channel (Left and Right) is rated at 120W RMS at 8 Ohm and 200W RMS at 4 Ohm. Thanks, Rusty
Question:	so i dont need to hook a amp to them
Answer:	Hi Mark. Thank you for asking. You just need to send the line level signal from your mixer to them. Usually with an XLR cable. No additional amp required. Have a great day!!
Question:	Does the lpf also limit what lows go to the satellites? in other words if set to 100 hz., does this then only pass above 100 hz out to the satellites
Answer:	Hi Tom,The LPF only regulates the frequencies for the 18" woofer, it does not affect the satellite outputs, or the line-level XLR outputs. The satellite and line-level outputs will output the original signal you feed the sub.Thanks,Rusty

Product features

Seismic Audio 18" Powered Subwoofer Cabinet (Pair)

Our powered 18-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 18-inch woofer and 800 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a pair of powered 18" subwoofer cabinets pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Aftershock 18 (Pair)

This listing is for a pair of 18" pro audio powered subwoofer cabinets. You will receive two identical powered 18" pro audio subwoofers pictured and described above. This high-performance, active subwoofer speaker system was designed with larger PA or DJ settings in mind. The Aftershock-18 powered subwoofer cabinet provides the power and performance you need. This powered subwoofer yields powerful deep bass reproduction and tight low end with optimal control. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.

Back Panel

The Aftershock-18 rear panel is outfitted with two 1/4" inputs, two power speakon outputs, a three-band equalizer, volume control and connects nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.

Protective Hardware

Heavy-duty, rugged hardware protect our Aftershock-18 sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Aftershock-18 comes with a pole mount in order to mount main speaker cabs elevated above.

Heavy-Duty Recessed Handles

In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

• Model # - SA-10M (Set of 2) - 14” tall – 13.25” wide – 21” deep
• Woofer - 10” 2 way crossover w/ a 40 oz magnet & 2” voice coil. 100 Watts RMS – 200 Peak.
• Wired at 8 ohms. 45Hz –20KHz. Sensitivity: 95 db. Piezo Tweeter - 4x8
• 5/8 plywood front panel. Black carpet w/ black metal corners. Recessed handles. Metal Grill
• Input terminal with two 1/4" inputs. Dual ports. These monitors are new. One year warranty.

User questions & answers

Question:	do this monitors need an amp? what would be recomended
Answer:	Thank you for asking. These are passive speakers so they will need an amp to power them. Have a great day!
Question:	what kind of amp do i need for these
Answer:	Hello, thank you for your interest in the SA-10m monitors. The amp you need will depend greatly on your application. An amp that will provide 150 watts per speaker would be optimal. You could use the LE-3000 from Seismic Audio for these if you wanted. They would provide 350 watts per speaker, which is more than is necessary, but they will run as long as you keep from supplying too much power. Have a great day!!
Question:	Will it work with the monitors out of my yamaha mg10x power mixer? or should i just daisy chain this from my powered jbl eon speakers
Answer:	Hi Francis,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! This listing is for a pair of our SA-10M PASSIVE floor monitors. You will need a power amplifier to drive these passive SA-10M floor monitors. The Yamaha MG10X is a console mixer and does not feature a built in power amplifier, so I would not consider this Yamaha mixer to be a "powered" mixer. I can only find line-level outputs, i.e. XLR or 1/4" TRS. So, this means you can either use a separate power amplifier to power these floor monitors, or you can check out the active version of these speakers, our SA-10MT-PW, which can be viewed here:https://www.amazon.com/Seismic-Audio-SA-10MT-PW-Pair-Powered-Titanium/dp/B00CZRHOJQ/ref=sr_1_2?ie=UTF8&qid=1474037938&sr=8-2&keywords=sa-10mt-pwWith these SA-10MT-PW, you can either daisy chain them off of your powered JBL EON 15" speakers, or you can output from your Yamaha mixer's 1/4" monitor output and control them separately from the mains, from the mixer. Let us know if you have any questions.Thanks,Rusty
Question:	Do i have to plug in both holes
Answer:	No, You don't!

Product features

Seismic Audio Pair 10" Wedge Floor Stage Monitors Speakers

These monitors are great for vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. These can be used on any setup for full band or drum monitors. Each monitor contains one 10" speaker with a 40 oz. magnet and 2-inch voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each monitor is made with 5/8" plywood. 10" monitors are ideal when you floor space is limited or your drummer needs a dedicated monitor and doesn't have much room. These 10" monitors take up a very small foot print on your stage. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. So, get ready for years of trouble-free, crystal clear sound!

SA-10M

This listing is for a pair of 10" passive wedge style floor monitors. You will receive two identical floor monitors, pictured and described above. Our SA-10M's are well-suited for use for DJs, vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. Well-suited as part of a full PA system.

Jack Plate & Inputs

The SA-10M is outfitted with heavy-duty jack plates that houses two 1/4" inputs and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio

Protective Hardware

Heavy-duty, rugged hardware protect our SA-10M monitors with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

n order to transport your monitors easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Pair of Professional 15" Speaker MainsModel #: SA-15T (Set of 2). 15" Woofer. 350 Watts RMS; 700 Watts Peak per cabinet. Woofer has 50 ounce magnet and 2.5" kapton voice coil. 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat. Two 1/4" inputs and two Speakon inputs. Frequency Response: 45Hz to 20kHz. Crossover: 12/18db per octave 3K hz high power with dual glass bulb tweeter protection. Impedance: 8 Ohms. Sensitivity: 96 db. Dual ports. Full metal grill. Recessed Handles. Black carpeted covering with black metal corners. LxWxD: 25"x20"x16". Weight:  52 lbs per cabinet. Condition: New. One Year WarrantyThis listing is for a pair of these 15" speaker cabinets.  You will receive two identical speaker cabinets, pictured and described above.  Each speaker cabinet has the specs above.These amazing 15 inch Speaker Cabinets deliver every sound loud and clear with a 15 inch woofer, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 350 watts RMS, 700 watts peak power per cabinet. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! Great quality mains are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of 15" Speaker Cabinets pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Woofer - 15" 2 way w/ 50oz magnet & a 2.5" kapton voice coil.  350 Watts RMS – 700 Peak
• 8 ohms 45Hz –20KHz Sensitivity: 96 db Tweeter: 1.5" Titanium driver 10z. magnet & 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
• 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
• Input terminal has two 1/4" & two Speakon inputs. 1.5" stand mount. 29" T - 19" W - 15" D

User questions & answers

Question:	do i need a amp to hook these babies up to my home stero
Answer:	Hi, This may be a Yes and No answer. Your home stereo may already have some AMPLIFIED outputs, usually seen in the form of Red and Black binding posts or push lock terminals for raw speaker wire, to power some PASSIVE speakers. Usually the speakers for home stereo or home audio surround sound receivers are much smaller "bookshelf" style speakers, which typically require less wattage to "drive" or "power" than something like these full size Seismic Audio SA-15T. Each one of these SA-15T cabinets is rated at 350W RMS at 8 Ohm. Ideally your home stereo's AMPLIFIED output would be around 1.5 times this rating, or 350W RMS * 1.5 = 525W RMS at 8 Ohm. If your home stereo is rated around this 525W RMS at 8 Ohm per channel, then you are good to go. If not, you may want to look into going with a separate power amplifier for these SA-15T, something like our MBG-4000, which you can find on Amazon here: https://www.amazon.com/Seismic-Audio-MBG-4000-Power-Amplifier/dp/B007W4VN1M/ref=sr_1_1?ie=UTF8&qid=1520266248&sr=8-1&keywords=mbg-4000 If you go this route, you will need to find some line-level output from your home stereo, something like the RCA red and white female jacks or an 1/8" headphone or "Auxiliary" output. This would need to be an OUTPUT not an input. This output would allow you to send the line-level signal from the home stereo into the MBG-4000 amp, so it can amplify this signal to speaker level, and send on to the SA-15T. If you go the route of a separate amp, you will need the line-level cable to get out of the home stereo and into the MBG-4000 amp, and the "speaker cables" to output from the amp and connect to the SA-15T speakers. You can email us directly at [email protected] if you have any questions. Thanks, Rusty
Question:	How are these speakers powered? D cord
Answer:	These are passive speakers. They can accept Speakon or 1/4" speaker cables.
Question:	My amp says use 6-16 ohm speakers. does that mean 6 speakers at 16 ohms or 6 through 16 ohm. these speakers are 8 ohm. do i have an option? sean b
Answer:	Hi Sean, This 6-16 Ohm on your amp/receiver is indicating the impedance of the speakers you may connect to each channel. You are typically more interested in the lower number, this 6 Ohm, as this is the LOWEST STABLE IMPEDANCE for these output channels of your receiver. With impedance, the lower the number, the more work is being done. This amp is telling you that it can go down to 6 Ohm, but no lower. Should you connect a lower impedance speaker, or chain of speakers, then the output channel of the amp will fry. Since these SA-15T are rated at 8 Ohm, your amp can support one per channel, at least in terms of the impedance. You must also consider the wattage output of your amp, at this impedance of 8 Ohm. These SA-15T are rated at 350W RMS at 8 Ohm. You would want to at least match this wattage rating, with the ideal wattage rating being around 1.5 times the wattage of the speakers, or 350 * 1.5 = 525W RMS at 8 Ohm. This would be the ideal power rating for the amplifier you are using to drive these SA-15T. If your amplifier is rated lower in terms of wattage than this 350W RMS at 8 Ohm, then you will be underpowering these SA-15T and this could lead to poor performance from the speaker, when it is not the fault of the speaker. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	How to i hook up this pair of speakers to a europower PMP 4000 mixer
Answer:	Hi, You should be able to use Speakon cables to connect from the powered outputs of your Behringer PMP4000 to one of the Speakon input jacks on each speaker. You can check out our 25 foot Speakon cables, product code TW12S25 here: TW12S25Pair: https://www.amazon.com/Seismic-Audio-TW12S25Pair-25-Feet-Speakon/dp/B004HKMROQ/ref=sr_1_1?ie=UTF8&qid=1503070124&sr=8-1&keywords=tw12s25pair Thanks, Rusty

Product features

Description

Pair of Professional 15" Speaker Mains

• Model #: SA-15T (Set of 2)
• 15" Woofer in each Cabinet
• 350 Watts RMS; 700 Watts Peak per cabinet
• Frequency Response: 45Hz to 20kHz
• 3K hz high power with dual glass bulb tweeter protection
• Impedance: 8 Ohms
• Sensitivity: 96 db

Features

• Crossover: 12/18db per octave
• Woofer has 50 ounce magnet and 2.5" kapton voice coil
• 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat
• Two 1/4" inputs and two Speakon inputs
• Dual ports

Specifications

• Full metal grill
• Recessed Handles
• Black carpeted covering with black metal corners
• LxWxD: 25"x20"x16"
• Weight: 52 lbs per cabinet
• Condition: New

Product description

Portable Powered 12 Inch PA or Karaoke Speaker Model: RSG-12 - Portable Powered 12" PA/DJ Speaker with Bluetooth, 2 Wireless Mics and Rechargeable Battery. Power Ratings: 100 Watts RMS; 200 Watts Program; 400 Watts Peak. Class A/B High Powered Amplifier | 12 Inch Woofer with a 60 oz Magnet and 2 Inch Voice Coil. Nominal Impedance: 4 Ohms | Frequency Response: 60Hz - 18kHz | Sensitivity: 97 dB. Built In 5 Band EQ l Connector(s): RCA Line In / Line Out | 2 Mic Inputs (XLR & 1/4") | Binding Posts for DC Power | Built-In USB (2.0)/SD/MMC/MP3 Inputs. Bluetooth Pairing Capability | Wireless Remote Included. 2 Wireless VHF Mics with Wireless VHF Mic Capability. Injection Molded Polypropylene Enclosure. Integrated Wheels and Retactable Carrying handle for easy portability. Controls : Master Volume and Power On/Off Switch. AC Power Input | Built in 12 volt, 7.5 Ah Rechargeable Battery. Dimensions: 14" x 12.5" x 23". Weight: 29.1 lbs per Cabinet. Warranty: One Year WarrantyIn a single PA package, we have placed all the features you need in a PA System. Two wireless microphones built-in allow for simple live performance sound reinforcement. Karaoke and DJ applications also can make good use of the included mics. Bluetooth connectivity, plus USB and SD ports, allow for multiple ways to have MP3s playing through the speaker. An IR remote gives you access to these features while walking around, adding flexibility for tailgating, karaoke, or using the speaker for small parties. An onboard five-band EQ, a full complement of audio inputs provide all the tools needed for PA applications. Excellent for tailgating or playing in the park, the Seismic Audio RSG Bluetooth pro audio speaker can do everything, anywhere.

• Model: RSG-12 - Portable Powered 12" PA/DJ Speaker with Bluetooth, 2 Wireless Mics and Rechargeable Battery
• Power Ratings: 100 Watts RMS; 200 Watts Program; 400 Watts Peak
• Class A/B High Powered Amplifier | 12 Inch Woofer with a 60 oz Magnet and 2 Inch Voice Coil
• Nominal Impedance: 4 Ohms | Frequency Response: 60Hz - 18kHz | Sensitivity: 97 dB
• Built In 5 Band EQ l Connector(s): RCA Line In / Line Out | 2 Mic Inputs (XLR & 1/4") | Binding Posts for DC Power | Built-In USB (2.0)/SD/MMC/MP3 Inputs

User questions & answers

Question:	Where is the instructions for this at
Answer:	Hello, thank you for your interest in the RSG-12 from Seismic Audio. There should be a user's guide in the box when you get one. If you have questions about the unit, feel free to call 901-363-6030 between 9am and 5pm Central Time, Monday-Friday. Have a great day!
Question:	Is the 12” speaker better than 15” for vocals
Answer:	Hi Mister Manster, Yes, the 12" models will be slightly better for vocals as they will have a cleaner mid range compared to the 15", but the 15" would give you a little bit better bass response. However, the bass response from the 15" would not matter if you are using subwoofers as well. Thanks, Rusty
Question:	Can I add a Shure microphone wirelessly to this? If so how do i do that
Answer:	Hello, thank you for your interest in the RSG-12. If you have a different wireless received, for instance one made by Shure, you would connect it to one of the XLR inputs. You would not be able to use a different wireless transmitter with the built in wireless receivers. Have a great day!
Question:	How many hours battery last
Answer:	Hi Same, You can expect 2-4 hours of battery life, depending on how loud you play the speaker. Thanks, Rusty

Product description

10 Inch Coaxial Speaker - 250 Watts Model Number: CoAx-10. Power Rating: 250 Watts RMS - 500 Watts Peak. Type: 10" Coaxial Speaker. Nominal Impedance: 8 Ohm. Frequency Range: 50Hz - 18KHz. Sensitivity: 97 dB. Magnet Weight:. LF: Y30 - 44 oz. HF: Y35 - 12 oz. Voice Coil Diameter:. LF: 2.5" Voice Coil. HF: 1" Voice Coil. Chassis Type: Pressed Steel. Cone: Paper Cone/Cloth Edge. Warranty: One Year Warranty. Cut Out Diameter: 9". Diameter: 10". Mounting Slot Dimensions: 1/8". Number of Mounting Slots: 8. Overall Depth: 5 3/4". Weight: 9.9 lbsOverview Whether you are doing live sound, in the studio, an emcee, a DJ gig, or karaoke...The ability to hear yourself on stage is essential. If you are building your own speaker cabinet or replacing an old loudspeaker, this 10" coaxial speaker is what you need! The CoAx-10 is an awesome coaxial speaker that produces a true sense of sound by allowing all the sound to flow from the same source and providing optimal coverage! At 250 Watts RMS, this speaker can handle what most amps can throw at it. The Seismic Audio Experience The Seismic Audio brand was designed with the notion that every musician should have access to high quality Pro Audio gear at an affordable price! With your purchase, you will receive one 10 Inch Coaxial Speaker pictured and described above. You will also receive top notch customer service, plus all the technical expertise you will ever need is just a phone call or email away! Join the Seismic Audio revolution!

• Model Number: CoAx-10
• Power Rating: 250 Watts RMS - 500 Watts Peak
• Type: 10" Coaxial Speaker
• Nominal Impedance: 8 Ohm
• Frequency Range: 50Hz - 18KHz

User questions & answers

Question:	How would these Pro audio pa speakers work in an acoustic guitar amp
Answer:	Hello, thank you for asking. It depends on if we are replacing a woofer and a tweeter. If there are already separate separate connections for a woofer and tweeter then you just put it in and connect them as appropriate. It would be helpful to know the crossover point in that situation. Now if there is no current tweeter then you would need to add a crossover. Around 2.5khz is what we normally set. If there is not current tweeter the current EQ output may be a little hot in the high end depending on how the amp was engineered.
Question:	Does this speaker have a built in tweeter? i'm looking for a replacement speaker for a roland pm-10 that has a built in tweeter that is 10" @ 8 ohms
Answer:	Hi Earl,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! These CoAx-10 coaxial woofers do include the high frequency tweeter driver (including the tweeter diaphragm). This listing is for one of these CoXa-10 woofer/tweeter units.Thanks,Rusty
Question:	are there seperate connections for high and low on speaker
Answer:	Hi, Each component, the woofer and tweeter, will have their own positive and negative terminals. You can sort of see this on the 3rd picture, which shows the woofer pointed down and you can see the terminals on the woofer, and you can barely make out one of the terminals for the tweeter driver. Thanks, Rusty