10 best stage lighting setup

• The Arch Kit is perfect for venues with low ceilings or even your home with a total height of 8.25ft. Get a professional look in minutes with this affordable solution designed for DJs, bands, or any entertainer on the go.
• Includes all parts to mix and match truss size setup depending on venue size, up to 23' wide!
• System Includes: 6.56' 2 meter triangle truss sections, 5' triangle truss sections, corners, 13"x39" bases, All necessary bolts and connecting hardware
• Specifications: 23' total truss width. 8.25' total height (99"). 7.5' from floor to bottom of top truss (90"). 13"x39" sturdy metal truss bases. 1.5" diameter tubing. Includes all bolts and nuts for easy assembly
• The CedarsLink Black Metal Arch Kit is a lightweight triangular truss system providing the perfect location to hang lights and other DJ equipment for a professional presentation.

User questions & answers

Question:	Can you get this truss taller than 8.25 ft
Answer:	Hello Francesca, The machine we sell is the upgraded Appia Life model which now has a stainless steel boiler which is insulated. Please contact us at 800-533-7214 if you have any other questions. We are a Premier Authorized Dealer for Simonelli and carry ALL models. Barista Training on these machines is also available from us! Sincerely, Randy - Java Exotic Imports
Question:	Is it sturdy enough to mount LCD tvs on it
Answer:	Turn the shackle 180 degrees. Push down and hold - Set new combo. Release shackle
Question:	Do the base plates lay flat on the floor? I see there are bolts at the bottom
Answer:	from the letters provided, COMET will not be able to be spelled...C is not on the first wheel (A B D F L M P S T W), nor is M available in the third position
Question:	Are top sections easily interchangeable with the sides? also are the tubes very thin or ample thickness so as not to distort when bolting on fixtures
Answer:	No this lock has no key.

• All Connection Parts Are Heavy Duty Metal Instead Of Plastic Like Other Brands!
• Max Height- 11 ft. 6 in. (3.5m.) Span- 15 ft.
• Top Bars Length- 3 ft. 11 in. (1.2m.) Leg Tubing- 1 3/8 in. (35mm.)
• Top Bar Tubing- 1 1/2 in. (38mm.)
• Load Capacity- 330 lbs. Evenly Distributed (150kg.)

User questions & answers

Question:	I am new to this and not sure I need this long of a system. Can it be used as a 10' or 5' truss? Can the T bars be used on their own
Answer:	Yes the silicone gasket does touch the water as it begins to biuld presser the water is forced up past the gasket into the top of the pot however the gaskets last a long time and you can get replacement gaskets very easy . I drink a lot of coffee and I only have to replace the gasket once a year .
Question:	So i bought this item because it is advertised as being 15 ft long. However, the package came in and the box says 13 ft. Which is it
Answer:	Hi, we can assist you with this machine. Please let us know what city you are located in. The bar pressure is typically 9 bars when pouring a shot of espresso. Sincerely, Randy Java Exotic Imports Authorized Dealers for Simonelli
Question:	Okay, leg connections are made of metal. But what about the other connections (truss to pole, etc) - are they made of metal too (or plastic
Answer:	Hi, Absolutely! This is our most popular machine for mobile / coffee trucks. We also sell the water pump. Please note the machine we sell is the new upgraded Appia Life model. The photo shown in the listing is the older model. Please contact us at 800-533-7214 if you have any other questions. We are a Premier Authorized Dealer for Simonelli and carry ALL models. Barista Training on these machines is also available from us! Sincerely, Randy - Java Exotic Imports
Question:	What Is the Maximun weight capacity of this truss
Answer:	Hi, this is a 220V machine only. If you are looking for a 110V 2 group machine, we also sell the Simonelli Appia Life Compact 2 groups in 110V. Please contact us if you have any questions at Java Exotic Imports 1-800-533-7214. Thank you - Scott

• LIGHT SOURCE: Super bright 7 x10W QUAD leds，Red, Green, Blue, White ,simple operation Stage Par Can Light
• MODES: DMX512, SOUND ACTIVE, Master/Slave, Auto Run and Random, pretty cool uplights for church, wedding and other washout effect.
• CHANNELS: This led stage light is with channel 8 , 16.7 million kinds of color change, 25 degree LED angle up lighting， dual fans(top and bottom) for heat radiation.
• DUAL MOUTING BRACKETS to be put/hung inside a truss, or lay flat on the ground, side DMX IN&OUT for convinient dmx connecting, 3 ft power cord. WARRANTY: we provide a one-year repair warrant for this dj lighting package.
• POWER SUPPLY: AC110V-250V, Frequency: 50-60Hz, Power consumption: 75W, super bright up lights/ wash light for party, nightclub, church, concert and more.

User questions & answers

Question:	Will these lights work with the Venue Tetra Control
Answer:	The cushion is not vinyl covered.
Question:	Hello, do you have to use a DMX controller to use this light or can you just use the remote with a power source
Answer:	Not really. I didn’t notice that it increased width dramatically. I believe it is even with the outer wheel
Question:	Between these and the GBGS LED par which one is better? And why
Answer:	The Full/Desk arm relates to the type of arm on the wheelchair. The selection is for what time of wheelchair arm it is attached to.
Question:	Are rgbw wash light weather proof
Answer:	Hi. You need both footrests for this to work properly.

Product features

RGBW Par Can Light

It is a versatile lighting fixture that can be used to create wash effect for your exhibitions, stages, parties, or other occasions.

Made of premium material, it is always working on perfecting the product details to provide you with better product experience, as well as a longer service life.

Flicker free operation and a 4-button DMX menu with digital display, the lights may be operated by the unit's built-in programs.

Specifications

• Power Supply: AC110V-250V
• Frequency: 50-60Hz
• Power Consumption: 75W
• Light Source: 7pcs 10W high brightness 4 in 1 color LEDs
• Lamp Life: 60-100 thousand hrs
• LED Angle: 25 degree
• Color: 16.7 million kinds of color change
• Packing Size(each): 10.73*8.36*15.84 inch
• N.W(each): 11 lbs

Notes:

• 1.Do not expose this unit to rain or moisture.
• 2.The local power outlet need to match the required voltage of it.
• 3.Do not operate the unit, if it becomes damaged.
• 4.Always mount this unit in safe and stable matter.

• [USAGE] This portable stage light kit is suited for stage presentation, gig band lighting system, concerts stage lighting, theaters, wedding ceremonies or large parties. It can be floor mounted for additional uplighting effects to showcase the right emotion to portray.
• [COMPLETE PACKAGE] Stage lighting kit with comes 4 LED Par Cans, Tripod Lighting Stand to maneuver, Foot-Switch Controller for better control, Power Cord, a ParCan, and Stand Bag for protection and portability.
• [COMPATIBILITY] Compatible with other brand's Lighting System DMX control profile, sound-activated control mode ready, and with 4 X 3 X Tri-9W RGB LED Diodes.
• [ACCURACY] You will be able to control from 1-4 colors per light using the 4 channels. Extended Power and Foot Switch Cables. It has 4Bar Tri Color with strobe rate at 0 - 20Hz for better accuracy.

User questions & answers

Question:	what diameter is the upper part of the stand? Could I use a one inch O-clamp on it
Answer:	The focus is manual.
Question:	is there an audio input instead of the mic? we use IEMs so i want to feed from the board to the lights for sound activation
Answer:	The lighting fixture has two fans one for the motor that moves the base unit and one for the LED bulb fixture itself. Well I’ve used the fixtures nonstop for eight hour intervals during parties and events I have not had any issues. Not sure about 12 to 14 hours however I can’t see how these would be ok for your situation.
Question:	How tall does the stand go
Answer:	Que fue lo que no sirvió, se mas específico tengo 6 y todas funcionan .
Question:	Are these plug & play "daisy chained" as in, i just plug an xlr from the out of one into the in of another & they sync? - or is it more complicated
Answer:	David...it comes with plenty of screws, phillips head. I do believe they are 1/4-20. There are four allen head screws used to hold the cross piece to the lower arms and the allen wrench is supplied. Hope that helps...

Product features

Designed for mobile entertainers

The PartyBar lighting system is an exciting all-in-one LED Wash system for mobile entertainers bands and stage lighting. Dynamic ready-to-go LED Stage Light Package for stage performance, pubs or parties.

The build-in programs are perfect for plug and play use, and the dmx function enables to customize you own scenes and effects.

• ♬ No Wires No Fuss - Built-in 5500mAh high-capacity battery and IR remote controller. No more worry about round the DMX cables and power cords.
• ♬ 4 Pack Stage Lights - With Real 1-Watts for each RGBW leds include 6 x red / 6 x green / 6 x blue / 6 x white
• ♬ Remote Control - Not just DMX control, this LED par light compatible with IR remote, which is more convenient for where can not be plugged easily.
• ♬ Multifunctional stage wash lights effects: Static Color / Hopping / Fade / Auto Program / Sound Activated / Master-Slave / DMX.
• ♬ Great uplighting for wedding and church. It’s also perfect for mobile dj gigs, dj facade booth, birthday party, bar, pub, dj stage lighting night club and musical live show.

User questions & answers

Question:	Does this product include 3-pin canon cable
Answer:	my wheelchair legrests do not attach, they just clip on to bi-level pegs
Question:	How do I get the remote to work
Answer:	1-3/8 inch pin spacing.
Question:	Can these lights be used outside
Answer:	If it is a newer wheelchair, it should fit, but please make sure by measuring the spacing between the mounting pins on the frame of the wheelchair (see the second image for this product). If it measures 1-3/8", these foot rests will fit your chair.
Question:	What is the difference between the 3 products, the price is different but the description is the same - i want sound activated wireless uplights
Answer:	not sure what kind of foam it is make out of, but it is a nice smooth, solid dense foam. Hope this helps.

• CREATE DYNAMIC COLOR SCENES: With 18 RGB uplighting LEDs, this stage light set makes any color you want and provides extremely bright lighting - perfect for DJ sets, parties, dances, stage performances, clubs, discos, music venues, etc.
• DUAL CONTROL METHODS: Use the DMX controller for complex lighting modes and use the four buttons (Turn up, Turn down, Confirm, and Mode) on the stage lights for basic controls and color changing.
• MULTIPLE MODES: Control 12 par lights simultaneously, set up to 8 channels for each par light, and use 192 channels with various modes such as voice control, color-changing, flashing, fading, and pulsing with adjustable speed.
• COMPACT PORTABILITY: These small and lightweight par lights are portable for DJs on the go and easily connect to the DMX Controller. Use them indoors and outdoors for weddings, bars, parties, plays, musical theatre, and music festivals.
• ACTIVATE YOUR ATMOSPHERE: With so many lighting mode configurations to choose from, you can change the tone of the party at the push of a button. Upgrade your DJ set equipment with a professional-quality light show.

User questions & answers

Question:	Do all these lights connect to the dmx controller system led beam pub bar with what's in the box from you, or do i have to purchase something else
Answer:	The lights connect by daisy chain with one connection end to the controller. the controller sends out the data over the dmx cabling to control the lights. You set up the lights for different channels if you want different lighting scenes.
Question:	I'm wanting to use these lights to accent the back walls of our church. Can they do that with them all on one color
Answer:	Yes, if they are on a DMX controller. That's what I am using them for as well. Blessings!
Question:	Would these lights work to add mood lighting to a stage production? We're thinking about them for our school play
Answer:	These lights have been an amazing for my events! They came right in the nick of time too! Great for ambiance! Great deal!
Question:	Did anyone find a useful programming manual online, don't bother answering if you didn't or just returned them
Answer:	I did not find instructions on this but this is what I know. The scenes on the board correspond to addresses on the lights and they sequence up 16 at a time scanner channel 1 on the left hand side of the board board is address 1. scanner 2 on the board is address 17, 3=31 etc. When the scanner button is turned on the faders will affect the lights with the proper address. The first fader is an overall brightness after that one fader will be for making the lights red, the next green another blue etc. One makes them flash. If you are getting nothing look to see if the blackout button has been pressed. On the lights themselves the mode button will take them through different types of operation. One mode will just make the light a color. One will make them react to sound. If you want them to be controlled by the board get to where is displays A001. If you hit enter, that is address 1. If you hit the up or down button you will get a number between 1-512. Remember the first is 1 and then you keep adding 16. If you have half of your lights set to address A001 and half of them set to A017. you will be working with 2 scanner channels. If you want all the lights to be the same at an time you operate the faders with scanner 1 and 2 turned on. If you turn off the scanner 2 light and use the faders the scanner 2 lights will stay as they are. Once you have what you like you can store the scene. I don't have my lights set up but you should be able to figure out how to store it. There is either a store button or you press an hold like programming a radio. Once you store a scene you can recall it regardless of the positions of the color faders. Once you have a few of your favorite scenes stored you can just hop between them getting an instant color change for your whole stage.

Product features

6 x Red, Green, & Blue LEDs

• 18 high-output 3W single color RGB LEDs (6 Red + 6 Green + 6 Blue) in each par light illuminate celebrations while cutting back your electric bill with energy-efficient performance. The built-in, quiet fan helps dissipate heat and extend service life.

DMX Control

• With DMX 512 and remote control, this stage light offers endless possibilities: adjustable brightness, speed, flashing effects, sound mode, color-changing, and strobing effects with one or more colors.
• 9 Function Modes: Static color mode (Red, Green, Blue), color combination, color changing mode, color fade mode, jump mode, strobe mode, sound active mode, DMX mode, & master-slave mode.

Complex Color

The par lights create amazing colorful effects and complex lighting arrangements.

Bright LEDs

Perfect for stage lighting, dancing parties, disco parties, clubs, light shows, and weddings, all our lights have upgraded lenses to become brighter than others.

Sound Activation Mode

Effortlessly switch between different lighting scenes using your voice with the built-in mic - it’s perfect for DJs who entertain crowds big and small at a wide range of events.

• [USAGE] This thin par has 4 bright colors with a flicker-free feature. This very slim wash light can generate vivid colors created by over 177 RGBA LED lights to create a custom look for uplighting event or venue lights or in any stage set up. Our uplighting DJ lights have 30 Red, 48 Green, 54 Blue and 45 Amber (10mm RGB led lights) which add excellent white balance, and warmth to your color RGBA light. Create the perfect, custom color led party light.
• [CONVENIENCE] This slimpar is a silent device while in use. It is a headlight with aluminum and plastic casing, resulting in durability and portability. Another advantage of this LED par can is that it only releases a minimal heat as most of the par can light we carry no longer have a fan that causes more noise.
• [COMPATIBILITY] This DJ par light offers sound activated custom modes such as automatic party lights, built-in programs for performances, master/slave mode, and all these can be controlled via DMX controller. Aside from using the back-panel button to control the par lights, you can adjust the intensity and color of light with the DMX as well.
• [USER-FRIENDLY] The easy-to-set-up design makes it very convenient to mix RGBA or static colors to dim or to fade, even without a DMX controller. Great for uplighting weddings, parties, concerts, plays, studios, events, DJ lighting, stage lighting, gig bar lighting, and more.

User questions & answers

Question:	Do you all sell DMX for this product
Answer:	If you wanted to, you can interchange the pieces and the tubes are pretty thick I
Question:	can it go with the beat of music
Answer:	12-24 hours, but it very firm after it fully expands. Highly recommended!
Question:	Is there an existing light profile for these in mydmx? i'm running mydmx
Answer:	It's memory foam
Question:	How are these powered
Answer:	You just open it up then it will relax and expand to fullness
Question:	Does this have to be mounted to a ceiling or can it be placed on the floor and pointed up? Also, would it be “big” enough for a school gym
Answer:	It does have a built in cover but not Sure it can come off.
Question:	how do you plug it up 2 a 120 volt plug
Answer:	It feels like sitting on a rock. The cushion is unstable on a soft seat like a recliner. i tried it for 2 hrs and gave up. i hate it. want to return it but instructions are not helpful.
Question:	Can you have steady one color light
Answer:	We recommend it should be used on the armchairs or near the arms of the sofa or couch, so you could hold the arms to keep safe.
Question:	I just received the light fixture and it had an odd round two prong plug on the cord -- almost looks like a European plug. Is this correct
Answer:	Yes, these leg rests should fit your chair. Please make sure by measuring the spacing between the mounting pins on the frame of the wheelchair (see the second image for this product). If it measures 1-3/8", these foot rests will fit your chair.

Product description

The Adkins Professional Lighting Party Bar X5 is a complete 5 effects in 1 DJ lighting solution fitted with 2 high-intensity quad-color (RGBW) PAR LED, Party Ball, Light Effect, Black Light Bar and a Strobe Light. They can be controlled wirelessly via the included wireless remote control or you can allow them to operate automatically in sound active mode. They can also be connected to a DMX controller for more advanced operation. A convenient tripod stand is included for quick and easy setup and tear down. Perfect lighting solution for the mobile Wedding DJ. Includes lighting stand. 110 – 120 VAC 60W

• Perfect lighting solution for the mobile Wedding DJ
• 5 In 1 LED Lighting Effects Fixture GigBar
• High Output 5 FX in 1: Moonflower, Strobe/Chase and Light effect
• Includes 2 Gig Bags, lighting stand. Easy to set up and tear down in minutes.
• 110 – 120 VAC 60W Weight: 12lbs Dimensions: 28” x 8” x 6”

User questions & answers

Question:	Are the lights replaceable if they get damaged
Answer:	Hi - I do not know the exact capacity, but I have two of there with 20 par cams and lights on each and there are no issues. If you plan to use only for lighting, its plenty strong. Hope this helps!
Question:	Does it have white light functions? Or just color
Answer:	You can add as many 5ft pieces to it if you order extra...
Question:	can two of these be connected together
Answer:	Yes. I mounted a 50” vizio on each side. Good product.
Question:	How tall will it go
Answer:	yes u don't need to bolt it to the floor

Product description

Take your stage equipment on the go and setup anywhere with this Lighting Stand System with Truss from Monoprice!



This trussing system offers easy set-up and high stability for your professional equipment. It can also be used as a mounting system for a large format projector screen. It comes with two tripods that telescope to 12.5 feet, featuring two locking grooved pins. Also included are two T-bars with four mounting points each and two, five foot trusses that securely lock together to create a ten foot wide span, or be used separately. This system is perfect for mobile DJs, bands, or even to use as rentals.



Features:



* 220 lbs Maximum Load

* Extends up to 12.5 ft tall

* Has 36 different mounting locations

* T-bars are 4 ft wide

* Spans 10 ft wide using the trusses

* Weighs 53 lbs

* Tripod base adjustable up to 3.5 ft wide





*** 30-day easy returns. No restocking fee. Free lifetime technical support. 1 year warranty. ***

• Supports up to 220 lbs of lighting gear
• 36 different mounting locations
• Spans 10 feet using the trusses
• Extends up to 12.5 feet tall
• 4-foot wide T-bars

User questions & answers

Question:	How high does this extend to? And how wide does it extend
Answer:	It's really not for floor. It's for desktop. Total height may be 22" to 25" inches.
Question:	Does this come with mounting bolts
Answer:	It's not that light weight. Very well made.
Question:	Does this come with cases
Answer:	If you are comparing it to the Samsung Tab 4 and the Fire HD, the screen on the ZenPad is much crispier, and you can watch Full HD movies in it - the Tab 4 and Fire HD resolution is only 1280x800, HD but not Full HD (which is 1920x1080).
Question:	Is the pipe on the truss the standard 1.5" diameter
Answer:	The tablet does come with a wall adapter and a USB to USB-C 3ft. cord. It does not come with a stylus but I purchased the Z-Stylus for $30 and it really expanded the abilities of the tablet.

• Specification:Professional DMX-512 LED 16/18 Channels stage light.
• 4 Modes: Sound activation, auto, DMX512 and master-slave
• RGBW+Amber+UV 6-in-1: 6 single color, Red, green, blue, white, amber and UV .
• Lighting effect: Wash light, color jumping, strobe and dimming.
• Useful: for disco, KTV, club, party, pub, bar, banquet, school show, wedding ceremony, etc.

User questions & answers

Question:	Does the 4 led version have fans in the base and/or light side? if so, how loud are they
Answer:	I have this same light, but it's the 4in1 LED version RGBW. There's only a fan in the head and is fairly quiet, but you can hear it in a quiet room. I'm not sure why the designers don't install silent fans and just add another $5 to the cost. They could market them as silent and sell a lot more!
Question:	I am specifically interested in the uv light. how would you rate the function and brightness of the uv? will it make colors pop in a glow party
Answer:	It will make certain colors pop, yes. The intensity of it depends on the proximity to the light itself. Works great for an average stage or small dance floor. Larger areas need additional units for coverage.
Question:	Can these be mounted so that they hang from a light bar
Answer:	yes, they can.
Question:	It didn't come with a manual... Any link to download one
Answer:	I've scanned mine and uploaded it here: https://drive.google.com/file/d/0B-xwiiC80HbPaU1WZ2lpcjh1dmc/view?usp=sharing

Product features

Tomshine provides professional stage lighting solution, ideal choice for you.

Long lifespan LED

Long operating life is up to 5,000 hours, low heat dissipation.

High quality material

High transmittance lens, metal accessories, ABS shell.

Strict quality control

Passed by strict multi-process and 24 hours test.

Excellent design team

World-class suppliers, to provide you the latest design of cost-effective products.

Specifications:

Voltage: AC 90-240 V 50 / 60 HZ

Power: Total 60W（4*12W）

Light source: RGBW+Amber+UV 6-in-1 LED

LED quantity: 4 LEDs

Light color: Red, green, blue, white, amber, UV

Lighting effect: Wash light, color jumping, strobe, dimming

Control mode: Sound activation, auto, DMX512, master-slave

Channel: 16 / 18 CH

Strobe: 1-10 times per second, adjustable

Pan: 540 degree

Tilt: 180 degree

Lifespan: 5,000 hours

Material: ABS

Item color: Black

Item size: 14 * 14 * 18 cm / 5.5 * 5.5 * 7.0 in (L * W * H)

Item weight: 1496 g / 52.4 oz

Package size: 19.0 * 17.5 * 15.0 cm / 7.5 * 6.9 * 5.9 in (L * W * H)

Package weight: 1887 g / 66.6 oz

Note:

1. This product is intended for indoor use only, not waterproof.

2. About noise: Because the product is small size but in high power, especially the heat dissipation of UV light is relatively large, so the head needs high-speed fan heat dissipation, the normal wind noise is normally.

3.About DMX: the product supports the DMX512 protocol. If you use the computer to disassemble the software, the software needs to support the DMX512 protocol.

4.About the bright : The product has 6 basic colors, of which UV light is used in conjunction with fluorescent products to render fluorescent effects on some festivals. The wavelength of the light determines that even if it is very high power, the eyes still look unlit.

Package list:

1 * RGBW+Amber+UV 6-in-1 Head-Moving Stage Light

1 * Power Adaptor

1 * Bracket

2 * Screw

1 * User Manual (English)