11 best american dj light meters

Product description

The all metal DB DISPLAY MKII decibel display from American Audio is for monitoring your sound volume. It also creates a great light show in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

• Designed to set in an amp rack to view your decibel level and Creates a great light show in your amp rack
• Display progresses from green through amber to red and Sensitivity adjustment on both left and right channels
• 2 separate modes: dot and bar and Includes 5V power supply
• Line Inputs: Left & Right RCA / Left & Right XLR and Line Outputs: Left & Right RCA / Left & Right XLR
• Voltage Operation: DC 5V, 500mA Power Supply included and Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm

User questions & answers

Question:	I want to use on a dedicated subwoofer amp. What is the frequency response of this unit
Answer:	Frequency response does not matter. This unit is a meter that measures signal strength/level - which is apples and oranges to frequency response. It will work fine with your subwoofer but don't hook it up to the power outputs from the amp - hook it up to the signal going into the power amp.
Question:	Can you hook xlr to rca(for the stereo receiver)? True probably go just rca ro rca but that wont be as much fun
Answer:	Yes, XLR is positive, negative and shield. Depending on signal direction. If xlr to rca shield would only connect at xlr. If rca to xlr shield would be connected to rca negative post. When shield is connected to sorce connector only it creates a shield to block interference along the cable.
Question:	So which 5v power supply is included? (usa
Answer:	Standard . 5v to 120v
Question:	Can this be used with a bass amp
Answer:	Be warned... it is NOT accurate (flat) with regard to bass frequencies. It works down to around 50 Hz, but at 30 Hz response is down and at 20 Hz it's WAY down. Something to be aware of.

Product features

DB Display MKII

The all metal DB Display MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system.

The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

Product description

Specifications:

1.Connector：3-pin signal XLR female to 5-pin male connection

2. Oxygen-Free Copper (OFC) conductor for enhanced signal clarity, offers the best possible sound transfer

3. cable length:3M(9.8ft)

features:

3-Pin XLR DMX cables for wide application, Designed for accurate transmission of digital audio and DMX lighting control data Works great as a mono connector for the Yeti Blue Pro Plus instead of the the y connector they provide. The electrical pass through is pin 1,2 & 3 of the 5 pin side to normal pin designation 1,2 & 3 on the 3 pin side. No jumpers or rewiring needed.

Package Included:

1pcs*XLR Cable(Note:ONLY Cables . Stage Devices in the pictures NOT Included)

• Connector：3-pin signal XLR female to 5-pin male connection,Safe, shielding, and prevent transmission interferences
• 3-Pin XLR DMX cables for wide application, Designed for accurate transmission of digital audio and DMX lighting control data,
• you can use this to send DMX signal over my XLR snake, it should converts 5 pin DMX to 3 pin XLR
• Suitable for connecting microphone, mixers, equalizers, crossovers, amplifiers, bass, DMX light, etc
• for example, various products of stage light: moving head light, par light, spotlight with XLR input & output,It also can works for Blue Yeti Pro,and it is connect dmx 512 2412 controller to the standard cables.

User questions & answers

Question:	Will I be able to stick this unit between my graphic equalizer out and the tape loop in on my receiver
Answer:	Yes. Keep in mind that if it is between the EQ and the Tape loop (using it's IN / OUT) any 'coloring' it may add or subtract will be shown across the entire system. If you have an extra tape record OUT pair in the system it might be better placed there as it will only serve as a monitoring device.
Question:	I have 4 of these (7.1 channels) do I need all 4 12v adapters or can I use only 2 or even one to run all 4 units? thanks
Answer:	One suppy will power all 4 IF you use a 2000ma or 2 amp, 12 volt DC power supply and not the one that came with it. The meters require 500ma to power each unit.
Question:	Are the leds real - do they stick out of the unit - or are they behind the face plate and just light up
Answer:	The leds are real and stick out about 1mm or 2mm (1/16") out of the faceplate.
Question:	can i use this devise using a graphic eq .a mixer and a dual cd player
Answer:	This is meant to display for DJ type work and is not accurate. It may be eighty led but it just really a forty because two are displayed as if it was just one led for a true forty led unit. Yes it can be used with low level amped outputs such as computer audio but will not be driven by low line level outputs. it is meant to go between the input going to the amp NOT amp output! Look else where for smaller displays if space is an issue.

Product features

dB-Display Black

- Designed to set in an amp rack to view your decibel level.

- Creates a great light show in your amp rack.

- Display progresses from green through amber to red.

- Sensitivity adjustment on both left and right channels.

- 2 separate modes: dot and bar.

- Includes 12V power supply.

- Line Inputs: Left & Right RCA.

- Line Outputs: Left & Right RCA.

- Dimensions: 1 3/4” L x 19” W x 1 3/4” H / 44.5mm x 483mm x 44.5mm.

- Weight: 2.5 lbs. / 1.25kg.

Product description

Seven Stars always specializes in stage lighting products & Solutions with best price.

Seven Star takes you to enjoy the visual feast of beautiful lights and see the effect of shaking the soul.

 Set the master led stage lighting unit with any models you like, for example “A001” / “d001” / “SLAV”, which connected DMX out port by 3-pin cable, the slave units set with “SLAV”, DMX in port by 3-pin cable.

Then you can combine and control all kinds of stage lights.

Standard DMX512 controller to control, 2/4 channels can be independent dimming. Control the color and speed of the par light freely.

No Need to Additionally Prepare Other Lines to Connect them together.

There are 2 Wires of DMX512 IN/OUT and 2 Power Wires,and they can work together by connecting their DMX and power wires one by one.Suitable for Medium and Large Performance Places

Practical design.

DMX par lights come with double handles,and double handles with two holes , can be self-supporting, can be hung, more conveniently.

 

Item Specifications:

Outer Shell Material: Engineering Aluminum

Light source: COB/100 W

Light Source Lifespan: 5000~10000 hours

Rating Power: 100W

Control Mode: DMX512 / Master-Slave

Channel: 2/4

Power Cord Length: 60cm

Plug Type: US Standard

Product Size: 297*237*229.5 mm/11.69*9.33*9.04 inch

Product Weight: 3.5 kg/7.72 lb

 

Package Include:

LED Par Stage lights X1

English User Manual X1

Brackets X2

Screws X2 

• [COB Par Lights] 100W Full Power light Source, Warm Cold: 3200K and Cold White: 5600K.6 meters effective range,10000 hours lifespan. 2/4 Channels
• [Control Modes] DMX512/Master-slave and strobe.The control modes makes it user-friendly not only for lighting engineers but also beginners.
• [Features] Y axis 180 degrees and stable mounting brackets ensure the light can be wall hanging or uplighting.
• [Occasion] Professional Stage lighti kits, Super bright for Stage show, Home Party, Street live, DJ Events or Karaoke.Noise: ≈53dB, if you wanna to use it in the quiet occastions (such as church, meeting room ect.) , please confirm the noise is acceptable or not .
• [Effect] Warm white (3200K) & cold white (5600K) & warm yellow --- 3 different light color creates luxury atmosphere and different strobe effect like fading, jumping, flashing

User questions & answers

Question:	Why Wont it turn on with a switched outlet
Answer:	What you mean is the light won’t turn on or off along with your switched outlet when it's plugged in outlet? It is impossible normally, and please cheeck if there is something wrong with switched outlet or if they’re connected together well. :-）
Question:	Would 2 be enough to light a 10ft wide stage
Answer:	Easily. I used four for a 32' stage with no problems. Keep in mind that the farther back you put them, the broader the coverage, but the lower the intensity.
Question:	I am looking for portable lights to light small stages at bars for stand-up comedy. Would these be sufficient for that
Answer:	Yes, more than. Two should do the trick.
Question:	can I use one of these without a dmx controller
Answer:	You can control them with the buttons on the back of the lamps, but you will not have any dimming capability - either on or off.

• COIDEA MINI LED STAGE MAGIC LIGHT, Perfect Strobe effect lights will dance to the rhythm of the music. When music up, The light will dance/flash to it which is SO COOL.
• BRIGHT RGB 7 COLORS STROBE LIGHT with REMOTE Has AUTO/FLASH/MUSIC MODE: With Solid Colors Or A Mix (red, green, blue, red/green, red/blue, green/blue, or all the colors together).
• PLUG AND PLAY, Perfectly portable mini LED stage magic Light with small(palm size)and exquisite appearance which is super easy to assemble and hang up.
• ENERGY SAVING, 3W Magic Light with long working life of more than 10,000 hours as it's using led technology. The lighting device has been made more reliable and durable electronics materials, The outer glass cover and the lights that will provide the best lighting experience.
• WARRANTY COMMITMENT, 12 months warranty and 8 hours customer service support, you are welcomed to ask any question on listing or by email, we will reply in 8 hours and will give you a satisfy answer.

User questions & answers

Question:	Do you need a disco ball for it to work
Answer:	No. You just plug it in and you have your own "disco ball".
Question:	My light worked great for about 8 uses, now it wont spin. Tried pushing every button, with no luck. What do i do
Answer:	Take the top Off of it. Twist the light around on the inside.
Question:	This product does not come with any instructions. How do the features for music work at the bottom of the remote? The play, pause, skip buttons
Answer:	You play music off of your phone or whatever device you use and put the speaker up to the light then push the music buttons and the light reacts to the music.
Question:	How will this light work at an outside party
Answer:	Depends on the application. As long as it is dark enough and has something to display the lights onto it will work great. Would think you would want it to be hanging so the lights will display on the ground. Only way to see the lights if it is facing up would be to have some sort of a roof, ie outdoor pavilion.

Product features

Wildly Used Party Lamp

It suits for any scenes,like home,room,club,pub,pool,school,parties,kids birthday,wedding Halloween, Christmas celebrations

 

Super Brightness

It's enough for covering a 30'x30' room. With clear parttern, it will lights up all your room and give more visually spectacular.

Customers Using Sharing

It is very small, but produces a lot of light. The music option works good enough when you're close to the light and being able to change the settings/lighting was fun! -by customer

• PREMIUM MATERIALS FOR DURABILITY: The DMX Cable is built to last with solid yet flexible PVC, pliable copper and chuck-type strain relief. The PVC jacket protects the cable from damage and fraying while the copper conductor is resistant to corrosion.
• BRAIDED SHIELD AGAINST EMI & RFI: The XLR Cable features a braided shield for less interference and added ruggedness. It effectively shields the conductors from electromagnetic and radio frequency interference, leaving the original signal intact.
• FLEXIBLE PVC JACKET FOR EASE OF USE: With pliable PVC jacket, this 3-Pin Connector Cable is easy to use, clean and coil. When it is not in use, coil it for easy storage.
• PERFECT FOR MULTIPLE OCCASIONS: This DMX Wire is a reliable companion in creating different lighting effects for various occasions like stages, weddings, parties, etc.
• OUR CUSTOMER SATISFACTION MONEY-BACK GUARANTEE: If you are not satisfied with the MFL DMX Cable Pack, just return them within 30 days for a full refund. No questions asked, no hassle.

User questions & answers

Question:	Any reason why you can't plug a dmx cable into another dmx cable to extend it
Answer:	You can plug Dmx cables together to extend the length. No problem..
Question:	How do i know if this dmx cable is compatible with my par lights
Answer:	Hello, you need to check your par lights and your controller if they are equipped with 3 pin XLR connectors. If it is 3 xlr ,then these cables will work with them. If it is 5 pin, it will be compatible if you have an adapter.
Question:	Es un paquete de 4 Cables
Answer:	Si / Oui
Question:	Can these be use for patch cable from mixer to power subs
Answer:	Again, NO! These are data cables ONLY and not suited for audio.

Product features

DMX cable can complement any DMX equipments

Featuring a braided shield, it can effectively shield the conductors from electromagnetic and radio frequency interference.

It is built to last with solid yet flexible PVC, pliable copper and chuck-type strain relief.

MF-DMC-2

Anti-interference Design

MF-DMC-3

Upgraded PVC Jacket

MF-DMC-5

Sturdy Metal Connectors

package

4 Packs in a Single Carton(MF-DMC-2 and MF-DMC-3)

• 【Upgraded Visual Effect】：the led stage laser lights integrates LED RGB laser light and RGB background light，7 beam combinations with colorful background light，Better visual effects with 48 patterns, creating a more wonderful atmosphere
• 【Easy Installation & Wide Coverage】High quality aluminum alloy housing, conveniently carry, just fixed by screws on round bottom, instead of traditional tripod, more compact and more convenient, and it could widely cover the area of 269sq.ft-323sq.ft at a height of 3 m after testing
• 【Sound Activated Music Control】Inside the lamp is an acoustically activated sensor. The party lens lights can easily recognize the sound and the party laser light dance with the music melody.
• 【Remote Control &48Patterns Light】Remote control could adjust on / off, the motor speed, colors and background colors, switching 3 working modes (Auto / sound / strobe). Auto (colors change automatically), sound control (colors change with the music), strobe (colors appear and disappear quickly), and total 48patterns combination light projection effect.
• 【Wide Application】LED stage strobe light is perfectly for disco, ballrooms, hotels, skating rink, public square, Dancing, family gatherings, bar, KTV, Wedding, party, concert and festival like Christmas, Halloween, etc, giving more enjoyment.

User questions & answers

Question:	can you project a pattern in freeze mode (so it's not moving and just a backdrop
Answer:	Yes, it can. you can push "motor stop" button in remote to keep pattern as backdrop.
Question:	Is the remote supposed to come with a battery? Mine did not
Answer:	The remote doesn't include battery, and battery type: 1PCS*CR2025
Question:	Is it a blue laser or a violet laser? From the pictures it appears to be violet (which is a cheaper laser to produce
Answer:	it’s blue laser. led stage laser lights integrates LED RGB laser light and RGB background light, we can provide laser light video if you like.

Product features

Amazing muilt-color Parttern light Effect

• Magic Visual Effect: 7 beam RGB combinations with colorful background light, such multi-effect combination to create a more wonderful atmosphere
• WIde Coverage：269sq.ft-323sq.ft at a height of 3M
• Remote & manual control：control could adjust on / off, the motor speed, colors and background colors, switch 3 working (Auto / sound / strobe)；or adjust auto/ sound/ off mode buttons on the light back side.

Party Light Dance With the Music Rhythme

Being built-in acoustically activated sensor., the party light can easily recognize the sound and the light changes with the music melody

• change therotation speed to the beat in music 1;
• Party light speed and flashing frequency change with the rhythm of the music in Music 2.

Easy Installation

• Placing on the table to adjust the angle to project the laser to the ceiling.
• Mount the DJ disco light on the ceiling and project the laser onto ground

RGB laser & Pink/Blue/White background design & 48pattern lights creating wonderful atmosphere in parties, birthday wedding bar karaok Christmas

• 【(Background Version】red and green color + background design,3 beam combinations (red, green, red &green),6 color backgrounds lights,36 kinds of patterns from Party light can create a rousing atmosphere and meet any of your party need.
• 【Easy Installation& Wide Coverage】High quality aluminum alloy housing, conveniently carry, just fixed by screws on round bottom, instead of traditional tripod, more compact and more convenient, and it could widely cover the area of 269sq.ft-323sq.ft at a height of 3 m after testing.
• 【Sound Activated Music Control】Inside the lamp is an acoustically activated sensor. The party lens laser lights can easily recognize the sound and the light changes with the music melody
• 【Remote Control & 36 LED Patterns】With 21key remote controller ,Remote control could adjust on / off, the motor speed, colors and background colors, switching 3 working modes (Auto / sound / strobe). Auto (make the light twinkling or static), sound control (colors change with the music), strobe (colors appear and disappear quickly), and total 36patterns combination light projection effect.
• 【Wide Application】LED stage laser projector with 3lens is perfectly for disco, ballrooms, hotels, skating rink, public square, dance family gatherings, bar, KTV, Wedding, party, concert and festival like Christmas, Halloween, etc, giving more enjoyment.

User questions & answers

Question:	Is it possible to be able to make the red and green lights not move and be stationary
Answer:	Yes, it is. you can press "motor stop" button to make red/green laser light , or light pattern you like beng stationary.

Product features

Remote & Manual Control

• Freely to choose auto mode, flash mode,strobe mode, speed,auto music 1,2 modes by remote
• Adjust the mode on back to turn on /off motor, sound mode and auto mode

RG Laser &Background Combination lghting

3 beam combinations (red, green, red &green), 6 color backgrounds (red, green, blue, red & green, red& blue, blue &green), such multi-effect combination creates 36kinds patterns to make a more wonderful atmosphere.

Covering the Area of 269sq.ft-323sq.ft at a Height of 3 m

Widely used for disco, ballrooms, hotels, skating rink, public square, family gatherings, bar, KTV, party, concert and festival like Christmas, Halloween

Great Projection Light Gift

• Projection Light &Mutil-Mount StandP
• acking Box & ManualR
• emote & AdapterS
• crews & Hex Allen Key

2 Kinds Sound Activated Mode：

Party laser light is built-in sound activated sensor, dancing with the music rhythme and beat,

• change therotation speed to the beat in music 1;
• Party light speed and flashing frequency change with the rhythm of the music in Music 2.

Easy Installation

• Placing on the table to adjust the angle to project the laser to the ceiling.
• Mount the DJ disco light on the ceiling and project the laser onto ground

• 【Colored Stage Lights】the Missyee 36 RGB is a DMX-512 controllable; full RGB color mixing par can is made up of high-efficiency LEDs. You can change the color combination anytime with up/down button or remote control.
• 【Various Modes】There are 9 function modes to fit for your need (Static color, Color combination, Color changes, Color fade, DMX, Master-Slave, Sound Activated, Jump Mode, Strobe Mode).
• 【Simple to Use】Super bright led uplights can be easy to set up and controlled by the remote control; You can connect it with DMX system by DMX cables, then manipulate it by remote control. The instruction manual described how to use this product in detail; it's easy to use it no matter you are the profession or new.
• 【Easy Installed Design】Dual handle design; you can hang the lights on everywhere or make it stand on the floor that you want, the angle the easy to adjust but also stable.
• 【Service Guarantee】All of Missyee products are covered with Lifetime Service Guarantee. With assurance, you can try Missyee products without any worries. Please contact us if you have any questions.

User questions & answers

Question:	does these lights have white color
Answer:	It is LED so LED is built-in and it is plug and play.
Question:	How much space or area does one light cover
Answer:	no, it did not include
Question:	Are the light bulbs included
Answer:	Do not buy mine broke within an hour they refused to replace it brought it to a repair place there was no schematics for it
Question:	I am interested in this products, does the dmx cables included
Answer:	Yes it does.
Question:	How many mic inputs have this speaker
Answer:	Hi, yes you can play them both at the same time. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PPHP1241WMU for more details. Thank you.
Question:	Does it have rechargeable battery
Answer:	More the 8 hour
Question:	can you play music and use microphone at the same time
Answer:	Best DJ speakers i ever had!
Question:	About how long can you play music on the batery
Answer:	Your cell phone will likely have an 1/8" stereo output. The SRM450v3 has XLR/TRS/TS combo jacks for sources. I would recommend using a mixer but if you do not wish to use a mixer an 1/8" TRS to 1/4" TS cable should work.

Product features

Party

All your friends and family are dancing on the hall,

36 up lighting shoots out colorful brightness moving with the music,

How relaxed it would be?

Control with the provided remote so you can easily set it up without using a DMX controller or manually adjusting the settings on the device

Wedding

Along with the romantic song on the wedding,

this 36 stage up lighting shoots fantastic brightness,

What a beautiful scene?

Small and exquisite appearance design for Missyee 36 led up lighting. With dual mounting brackets and screws to hang on or install on a wall or put on the ground.

9 Function Modes

This series product has rich effect programs, easier operation, there are 9 function modes:

• 1. Static color mode(White\Red\Green\Blue)
• 2. Color combination
• 3. Color changing mode
• 4. Color fade mode
• 5. Jump mode
• 6. Stobe mode
• 7. Sound active mode
• 8. DMX mode
• 9. Master-Slave mode

Product description

Add excitement to any light show or lighting installation with the redesigned Eco UV Bar 50 IR. This powerful LED ultraviolet bar lets you create long-lasting UV wash lighting throughout your venue or stage. Easily line walls, alleys or stages with adjustable mounting brackets. Connect up to ten fixtures using a daisy chain method by linking the IEC In/Out. Great for light shows or any lighting application, the Eco UV Bar Plus IR is a simple, professional way to amp up your lighting display.

• BRIGHT ULTRAVIOLET OUTPUT: Great for performance stages, theatrical productions and special effects installations, the Eco UV Bar features 9 brilliant 3-watt ultraviolet LEDS for bright, long-lasting UV output.
• LONG LASTING LEDS: Rated at approximately 50,000 hours of usage, you can be sure that the Eco UV Bar with light up the stage night after night.
• EASILY LINK FIXTURES: Line your stage or venue to create an ultraviolet display by connecting multiple fixtures for a seamless design. Each unit features IEC In/Out for easy connection.
• PROFESSIONAL CAPABILITIES: Included with the Eco UV Bar is a wireless remote that lets you control power, strobe, and fade all with the touch of a button.
• PRODUCT SPECIFICATIONS: 120-degree beam angle, adjustable mounting brackets, 30W power draw, multi-voltage operation: AC 100v-240v 50/60Hz, 395-405nm, 19.75” x 2.5” x 4.5”, 3.2 lbs., ETL Approved

User questions & answers

Question:	If I set this on the floor in front of a DJ in a gymnasium for a school dance, do you think it will at least light up the dance floor
Answer:	Putting lights on the floor doesn't normally get you an even wash because people block the light, it is better to clamp it to a structure (ie. DJ booth, truss stick, stand). I'm not sure if this is the black light you would want as it is a linear fixture, you may want to look into the UV COB Cannon.Thanks,
Question:	Can this be used without the strobe effect, as in just the black light effect
Answer:	Yes, this can be used as just a blacklight. The strobe effect is controlled with the included remote.Thanks,
Question:	Light will not stay on. When i flip the power switch it flashes for a second then goes off
Answer:	That means it's turned off on the remote. Turn it on on the remote and then when you flip the power switch it will stay on.
Question:	What size room will this cover
Answer:	This fixture is good for around a 20ft by 12ft area, depending on installation height.

Product description

Note: Cables Only; Stage Devices in the pictures not included

Descriptions:

4 pack 6.5 feet/2 meters DMX Stage Light Cables Wires with 3-Pin Signal XLR Male to Female Connection.

Designed for accurate transmission of digital audio and DMX lighting control data.

Safety, shielding, and prevent transmission interferences.

Connect stage lights that will be great for parties, weddings, and any type of festive occasion.

For stage light, such as moving head light, par light, spotlight, etc.

Specifications:

Quantity: 4

Material: PVC + Copper

Connectors: Male and Female

Cable Color: Black

Length: 6.5ft/2m

Package Contents:

4 x DMX Cable

• 4 Pack: 6.5 feet/2 meters DMX Stage Light Cables
• 3-Pin Signal XLR Male to Female Connection
• Safety, shielding, and prevent transmission interferences
• Suitable for various products of stage light: moving head light, par light, spotlight with XLR input and output
• Note: Cables Only; Stage Devices in the pictures not included

User questions & answers

Question:	Can I use this for powered speakers
Answer:	It doesnt. The case is to big and wont allow it to charge wirelessly. The back stand on money has already broken which is terrible cause I love the case

Product description

Features: - Uses DMX To Chain Multiple Units Together - Control Modes: Static Color, Color Changing, Color Fade ( Gradual Change), Auto Program (Lights Change all the Effects when Set in Auto), Sound Activated (Sound Begins to Operate and Response to the Bass Beat of the Music and Run Internal Effect Programs), Master-Slave & DMX Control ( When Set into ''d001'', Lights can be Controlled) - Multi-Color Lighting System - Used by DJs & Vocal Stage Performers - LED Illumination Light Source - High-Powered Energy-Efficient Design - Adjustable & Configurable Lighting Effects Settings - Digital LCD Display with Button Controls - Speed Adjustable Strobe Effect Illumination - Dimmer Configurable Settings - Includes Mounting Bracket, DJ Par Lights can be Mounted Anywhere - Perfect RGB Par Light for Party DJ Stage and Different Occasions - Easily Controlled by Remote Control (Included) and Professional DMX Controller (Not Included) - Adjustable Fade Speed - Includes Advanced Intelligent Digital & Accurate Screen Display - Great for Club, DJ Show, Home Party, Ballroom, Bands, Show Bar, etc. What’s In The Box: - Par Lights - Remote Control - Mounting Bracket - Screw Technical Specs: - Power Consumption: 40W - Power Output: 240V, 90AC - Frequency Response: 50-60Hz - Beam Angle: 25°(15°/45° Optional) - IP Grade: IP20 - Working Temperature: -20~40? - Type of Bulb: LED - LED Beads: 36PCS(12 x red, 12 x green, 12 x blue) - Control Mode: DMX512, Master-Slave, Sound Active, and Automatic, Remote Control - Light source : 36 x 1W LED (12pcs Red +12pcs Green +12pcs Blue) - Construction Material: Engineered ABS Shell - Connection: Single Cable - Power Cable Length: 3. 9’ ft. - Cooling mode: Air Cooling and Fan - Control Channels: 7 DMX Channels - Beam Angle: 25° - Strobe Speed Adjustable Levels: 1-99 - Color intensity Adjustment Levels: 000-255 - Dimmer Adjustment Levels: 000-255 - Remote Control Battery Operated, Requires x 'AA' Batteries - Product Dimension: 6. 89'' x 3. 94'' x 6. 89'' -inches

• 4 PACK 36 LED RGB LIGHTS: The LED stage lighting system contains 36 mini RGB LED lights providing the full-color spectrum for a more impressive light show. The bulb is bright and powerful which is Ideal for events like birthday, wedding, Christmas
• AUTOMATIC BEAT SYNC: These indoor outdoor par stage light led up lights set are great alternative for a disco ball. It can detect the BPM of the music playing and adjusts the speed of the light pattern to sync w/ the music for an awesome dance party
• TABLE/WALL/CEILING MOUNT: Setup on any Dj table to shine light patterns on ceiling / dj booth facade or use mounting brackets to mount on the ceiling to illuminate dance floor or stage w/ led light show projection and bring life to any party room
• DMX CONTROLLABLE: Attach a standard DMX cable to chain & control multiple units from a small centralized DMX system. Combine this light with any other Pyle LED par light and synchronize multiple moving lights to work together from one controller
• INCLUDES 4 REMOTE CONTROLS: Pyle portable LED DJ spotlight / uplights for party has digital display and comes w/ a remote control so you can easily change the mode, pattern, speed, strobe motion effects, and gradual flow between red, blue, & green color

User questions & answers

Question:	Do they Wireless
Answer:	Hi, it is not a wireless stage light. Thank you.
Question:	What is the code setting on the light to respond to the remote
Answer:	Hi, Our sincere apologies. We have a dedicated Customer Support who can help you out with your concern. Please call 718 535 1800 Press 2 then 1 from Monday to Friday from 9 AM to 5 PM EST. Thank you.

Product features

Professional Party Nightclub Lights Uplighting Lights for Events

The LED stage lighting system contains 36 mini RGB LED lights providing the full-color spectrum for a more impressive light show. The bulb is bright and powerful which is Ideal for events like birthday, wedding, Christmas

Adjustable & Configurable Lighting Effects Settings

Attach a standard DMX cable to chain & control multiple units from a small centralized DMX system. Combine this light with any other Pyle LED par light and synchronize multiple moving lights to work together from one controller

Digital LCD Display with Button Controls

These indoor outdoor par stage light led up lights set are great alternative for a disco ball. It can detect the BPM of the music playing and adjusts the speed of the light pattern to sync with the music for an awesome dance party

Dimmer Configurable Settings

Setup on any Dj table to shine light patterns on ceiling / dj booth facade or use mounting brackets to mount on the ceiling to illuminate dance floor or stage w/ led light show projection and bring life to any party room

Control Modes

Static Color, Color Changing, Color Fade ( Gradual Change)

Control Modes

Auto Program (Lights Change all the Effects when Set in Auto)

Control Modes

Sound Activated (Sound Begins to Operate and Response to the Bass Beat of the Music and Run Internal Effect Programs)

Control Modes

Master-Slave & DMX Control ( When Set into ''d001'', Lights can be Controlled)