11 best guitar equalizers

Product description

The GE-7 equalizer pedal offers seven bands of EQ ranging from 100Hz to 6. 4kHz, ideal for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

• Model# GE7
• The Package Height of the Product is 3 inches
• The Package Length of the Product is 6 inches
• The Package Width of the Product is 4 inches

User questions & answers

Question:	is this buffered
Answer:	It depends on the settingd
Question:	One note on my guitar—e 7th fret on the a string—hums and booms super loud when played as a single note. will the boss eq take care of that
Answer:	The 7th fret of the A string is the note E3. It has a frequency of 164.8 Hz. By reducing the bottom 2 sliders, at 100 and 200 Hz, but probably more attention on the 200 Hz, you can reduce the boominess of that note. However, you will also reduce those frequency components in all other notes played. You may be able to adjust an individual pole of your pickup(s) up or down depending on your particular pickup. Or may be able to adjust the pickup height on the Low E side. Again, such adjustments will impact a whole range of notes. Another option would be to find a pedal with a notch filter (such as a Boss AD-5 or AD-2) and use that to target the specific offending frequency. Best first step - make sure your guitar is properly set up by a luthier and discuss this issue with them prior to setup.
Question:	What is the production year of this pedal
Answer:	You are going to get varying answers as this pedal is still in production and there are many sellers. There's no guarantee what year you will get.
Question:	these days i play exclusively clean, mostly with my fingers. my gear is great, but am looking to remove sibilance from my tone. any opinions
Answer:	I'm guessing your speaking about playing an acoustic guitar, so that is what I will address... I bought this GE-7 to get rid of some nasty frequencies in the mid range of my acoustic guitar set up. Many piezo - electric pick-ups mounted under the saddle tend to over amplify the high frequencies, (string noise, tininess) and it can be tough to dial it out without adversely effecting your over all tone. Give this pedal a try, the GE-7 is bullet proof, and sounds very musical to the ear. Just start by dropping the 6.4k band by 5 dB or so. Small adjustments can make a huge difference. Experiment, have fun and remember that nobody can really tell what sounds perfect to you, but you. I hope this helps.

Product description

 Features: 

With this equalizer, you spend less time tweaking controls and more time playing. 

Shape sound and eliminate feedback with 5 bands of equalization. 

With bass, middle 1, middle 2, treble, pres control knobs. 

Tone and volume control. 

Wide frequency range from 20 HZ to 20 kHZ. 

Auto and manual tuning mode. 

LED for effect on/off and battery check. 

Easy to read metronome on LCD display.

Powered by 9V Alkaline battery (not included). 



Specification: 

Input impedance: 2.2MΩ 

Frequency response: 20 HZ - 20 kHZ 

Control range: 

Bass: ± 12dB at 60 HZ 

Midd 1 : ± 12dB at 500 kHZ 

Midd 2 : ± 12dB at 600 kHZ 

Treble: ± 12dB at 3 kHZ 

Presence: ± 12dB at 10 kHZ 

Package size: 12 * 12 * 8cm / 4.7 * 4.7 * 3.1in 

Package weight: 151g / 5.32oz 



Package List: 

1 * 5 Band EQ Equalizer 

1 * Battery box 

1 * Piezo Pickup Line 

8 * Mounting screws 

• With this equalizer, you spend less time tweaking controls and more time playing.
• Shape sound and eliminate feedback with 5 bands of equalization.
• With bass, middle 1, middle 2, treble, pres control knobs.
• Wide frequency range from 20 HZ to 20 kHZ.
• Easy to read metronome on LCD display.

User questions & answers

Question:	le hace a mi guitarra tacamine serie g
Answer:	I would not recommend this pedal for use on vocals. But, it does sound great on guitar and bass.

Product description

Specifications:

Brand name: FISHMAN

Model: PRO-PSY-201

Color: black

Size: 84.2*55.8*41.3mm

Package Included: 1 x Fishman Onboard Preamp 1 x End pin Jack 4 x screw 1 x Manual 1 x tag 2 x Mounting bracket(Battery is not included)

Notes: 1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2. Due to different personal measuring techniques, there might be 1-3cm error of the physical. Thank you!

• Small footprint fits many guitars. Volume control. Bass, Middle and Treble control knobs. Built-in tuner with LED display. Phase switch. Low battery indicator. Unique pivot design for instant 9-Volt battery access.
• Pre-wired Fishman Sonicore pickup for easy, solder-free installation Low profile control knobs. Onboard anti-feedback control (Notch). Brilliance control for additional tone shaping. Includes Sonicore Undersaddle Pickup. Volume, Bass, Midrange and Treble controls. Brilliance Control, Notch Filter, Phase Switch. Built-in Chromatic Tuner. Easy Access Battery Compartment. Solder-free Installation.
• The Presys+ Onboard Preamp System is designed and built to offer maximum control, performance and quality in a small, unobtrusive format. The compact, sophisticated Presys+ system features Volume, Bass, Mid and Treble controls, Brilliance control, Notch Filter control, Phase switch for controlling feedback, and a built-in tuner with LED display.
• The Presys+ also includes a pre-wired Fishman Sonicore pickup for solder-free, plug and play installation, a low battery indicator, low profile control knobs, and a unique pivot design for easy access to the battery compartment.
• Fishman Onboard Preamp Musical Instrument Accessory Folk Guitar Wooden Guitar Pickup Pick Holder For Acoustic Guitar

Product description

The 3 band equalizer is for acoustic guitar, thin body design, clear LCD display, with phase and tuner function, it will upgrade your guitar and modify the sound for more perfect performance.



Specifications:

Main Material: Plastic

Band: 3

Input Impedance: ＞15MOhm

Frequency Response: 20Hz---20KHz

Control Range: Bass: ±12dB, Middle: ±12dB, Treble: ±12dB

Pitch: 440Hz

Plug Dimension: 6.35mm

Power Supply: 9V Alkaline Battery(Not Included)

Item Size: 8 * 4.5 * 6.5cm / 3.1 * 1.8 * 2.6in

Item Weight: 108g / 3.8oz

Package Size: 12 * 8.5 * 6cm / 4.7 * 3.3 * 2.4in

Package Weight: 149g / 5.3oz



Package List:

1 * 3 Band EQ

1 * Pickup Line

4 * Mounting Screws

1 * Sticky Plate

1 * Cable Tie



Note:

The battery is not included.

• 3 band equalizer for acoustic guitar, it helps to modify the sound.
• Volume control, clear LCD display, bass/middle/treble knob to adjust voice frequency.
• Compact body, the battery box is built-in the equalizer, easier to mount it on the guitar.
• With phase and tuner function.
• Powered by 9V alkaline battery(not included).

User questions & answers

Question:	Could you list the control panel dimensions in inches please
Answer:	The buyer I went through with Amazon. I got the power adaptor. But I I live in Australia they sent me the USA power supply witch works on 240volts as well. but I had to buy a adaptor $5 to change the plug input. Most sellers ask where or what country. Hope this helps. From Ron in Australia Sydney. Have a good one

Product description

The GEB-7 is a seven-band equalizer created specifically for the frequency range of the electric bass. Since the frequency range extends down to 50Hz, The GEB-7 is also great for adjusting depth and bottom end of an upright bass with pickups.

• Model# GEB7

User questions & answers

Question:	Is there a significant difference between this and the Boss GE 7 for guitar
Answer:	No, the GEQ-215 is not equipped with an input voltage selector switch. In order for this unit to function in regions with 220V circuitry, a third party step down transformer to 110V AC 60 Hz must be used.
Question:	does this pedal increase the noise level
Answer:	Given that it's rack-mountable and runs on 120 VAC, I'd say it's intended use is neither: live sound (club, church...) reinforcement. But it could also be used at home. The form factor, plus the AC requirement would make use in a vehicle difficult!
Question:	Parent of a bass player, he wants a pedal for looping and distortion. Does this pedal do that
Answer:	Yes
Question:	does the power supply come with the pedel
Answer:	Hi, the 50hz knob will affect the sub response. If you have any other questions feel free to contact our tech support at (323)-231-3525 or you can also email us at info@woofersetc.com. Thank You.

Product description

Specifications:

Material: Plastic

Control Range: Bass --±12dB at 75Hz

                       Middle --±12dB at 750Hz

                       Treble -- ±12dB at 10KHz

A4 frequency: 440HZ

Tuning Range: A0(27.5Hz) - C8 (4186.01Hz)

Power Supply: 1 * 9V Battery (not included)

Item Size: 5 * 5 * 3cm / 2 * 2 * 1.2in; 6 * 3.5 * 5.5cm / 2.4 * 1.4 * 2.2in

Item Weight: 80g / 2.8oz

Package Size: 10.5 * 7 * 7cm / 4.1 * 2.8 * 2.8in

Package Weight: 110g / 3.9oz



Note:

Battery is not included.



Package List:

1 * Guitar Pick-up System

• Pickup, tuner and equalizer system for acoustic guitars.
• 3-band EQ (BASS, MIDDLE, TREBLE).
• With LCD display for showing the tuning information.
• With volume control knob and low battery check LED.
• Ideal for acoustic guitar players to improve the guitar sound.

User questions & answers

Question:	I need a pre-amp/tuner equalizer for a yamaha acoustic/electric fsx720sc small body solid top will this work
Answer:	I have used this pre-amp with very good results. You have to cut on the body side to install the controls and drill a little hole on the bridge to install the piezo wire pickup. I used a video from you tube and there are several that you can follow to do the installation process. Don't be scared, I did it and I'm not a rocket scientist. It works very good, it is sensitive and loud. Just make sure the height of your guitar body is high enough to accommodate the width of the control. Sincerely, Irving from Orlando, FL.
Question:	How long is the piezo (copper pickup part) in inches
Answer:	Longer than a standard 6 string guitar bridge saddle slot. But you don't have to put the entire length in the slot, which would still work on a shorter bridge like a ukulele, mandolin, etc.
Question:	I need a pre-amp/equalizer for a fender bass bg 29. not sure which one i need
Answer:	The pre-amp JOYO is a good stuff. I own a small one for ukulele. I am not familiar with bigger pre-amps for bass guitar.

Product description

Specifications:

Input: 1/4" monaural Jack(impedance 510K Ohms)

Output: 1/4" monaural Jack (impedance 1K Ohms)

Current Draw: 10mA

Power Supply: DC 9V AC adapter (center minus plug)

Item Size: 9.5 * 4 * 3.5cm / 3.7 * 1.6 * 1.4in

Item Weight: 150g / 5.3oz



Note:

Power Adapter is not included.

Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.



Package List:

1 * Guitar Equalizer Pedal

1 * User Manual (English & Chinese)

1 * Pouch

• ♪ Equalizer pedal with true bypass designed for electric guitars.
• ♪ 7-band EQ slider, ±15dB adjustable gain range per band.
• ♪ 7 frequency centers: 63Hz, 125Hz, 250Hz, 500Hz, 1.0KHz, 2.2KHz, 5KHz.
• With one slider for adjusting the level of overall output.
• Full metal shell and compact size, durable and portable.

Product description

When you hit the stage, you definitely want to be rockin' with a Buckle-Down guitar strap. Proudly hand-crafted in America, Buckle-Down's premium guitar straps are hand-built with hearty, durable materials and display your favorite characters or brands with the highest-quality printing in the industry. The colors pop so hard that people will notice your strap from outer space! Great for everyone from beginners to advanced players, this strap will adjust to fit children and adults. This product is Officially Licensed by Buckle-Down, Inc..

• Buckle-Down Guitar Strap - Equalizer - 2" Wide - 29-54" Length

Product description

Specification:

Input impedance: 2.2M?

Frequency response: 20 HZ - 20 kHZ

Control range:

Bass: ± 12dB at 60 HZ

Midd 1 : ± 12dB at 500 kHZ

Midd 2 : ± 12dB at 600 kHZ

Treble: ± 12dB at 3 kHZ

Presence: ± 12dB at 10 kHZ

Package size: 12 * 12 * 8cm / 4.7 * 4.7 * 3.1in

Package weight: 151g / 5.32oz

Powered by 9V Alkaline battery (not included).

Package List:

1 * 5 Band EQ Equalizer

1 * Battery box

1 * Piezo Pickup Line

8 * Mounting screws

• With this equalizer, you spend less time tweaking controls and more time playing.
• Shape sound and eliminate feedback with 5 bands of equalization.
• With bass, middle 1, middle 2, treble, pres control knobs.
• Wide frequency range from 20 HZ to 20 kHZ.
• Easy to read metronome on LCD display.

User questions & answers

Question:	what are the cutout sizes required for both the device and battery box
Answer:	Yes
Question:	Will this work on an acoustic bass
Answer:	Yes, It works.
Question:	Will this work with a tenor ukulele
Answer:	Yes

Product description

EQ is the most important part of your sound, and often the most overlooked... The often overlooked EQ pedal is one of the most powerful devices that you can place in your rig. And if the constant demand for one from Wampler fans is any indication, we admit that the introduction of the Wampler EQuator may be a bit overdue. But we knew that if we wanted your attention, we’d have to take our time to create an EQ pedal with the player-friendly ease of use and demand for top quality that Wampler strives for every day. Instead of the learning curve that can accompany individual sliders for each frequency, we gave you fixed bass and treble controls and two semi-parametric mid controls that are as easy to harness as twisting a few knobs. Each knob’s frequencies have been carefully defined (with the sweet spots marked) for the needs of players and to offer one of the most flexible EQ pedals out there. Whether you’re wanting a fully customizable clean boost, the ability to fine-tune the tone of another pedal, or to just bring out the best in your guitar, bass or ANY instrument you choose to plug into it - we crafted the Wampler EQuator to be the tonal sweetener you need to get the job done… Even if you don’t use a pedalboard and are not a guitar player - put this between your instrument and the amp, the P.A., or recording interface… the EQuator will bring it to life.

• Fixed bass and treble controls and two semi-parametric mid controls that are as easy to harness as twisting a few knobs
• Carefully defined frequencies (with the sweet spots marked) to meet the needs of players and to offer one of the most flexible EQ pedals out there
• Features precise frequency control, ample output, and a compact design
• Plenty of output for boosting the front of your amplifier
• High-grade components selected for their superior sound and response
• Top-mounted jacks make pedalboard placement effortless

User questions & answers

Question:	Would this work with a Mustang 1 or Champion 40 and does it come with a cable
Answer:	Put masking tape down to cut through and prevent scratches 3 & 1/8" x 1 & 5/8' inch (This is the outer most face measurement ) Using a fine kerf coping saw or hack saw blade the hole you need to cut will be 3"x 1 & 1/2" and use your Xacto knife to fit it from there. The body of mine already had a smaller hole and I used the pickup that was glued inside my Fender and soldered a plug onto it to plug it in to the pre amp. It really sounds great. Very big improvment and the built in tuner is great.
Question:	Is this v1 or v2? i'm looking for v2 with the input/output on the sides. customer's pictures in the review section shows one of each
Answer:	Claro que sí, se aplica a cualquier guitarra acústica.
Question:	With mini ego, getting weird drone like feedback/sustain especially on e and a notes. eq, repositioning guitar/amp doesn’t stop it. any ideas
Answer:	I'm not sure what that is, but have you watched the video that is with the product pictures...or checked out youtube? O_o I use this pedal 98% of the time as I am currently fulfilling the roll of a modern "worship guitarist" at a church, and it is just lovely what it does do. I started off thinking I liked the last effect on it set to the "Big Kahuna" settings, but ended up on the Mod setting with the knobs at the same setting which is somewhere around between 12 and 1 o'clock. -=80)
Question:	Does it work for bass guitar
Answer:	It will run on 220.I live in Australia and our power is 240 .it has a power supply that drops it down to 9 or 12 volts. When you put the country where you live so the send you the right plug for your power point.

Product features

Wampler Pedals EQuator

EQ is the most important part of your sound, and often the most overlooked...

The often overlooked EQ pedal is one of the most powerful devices that you can place in your rig. And if the constant demand for one from Wampler fans is any indication, we admit that the introduction of the Wampler EQuator may be a bit overdue. But we knew that if we wanted your attention, we’d have to take our time to create an EQ pedal with the player-friendly ease of use and demand for top quality that Wampler strives for every day. Instead of the learning curve that can accompany individual sliders for each frequency, we gave you fixed bass and treble controls and two semi-parametric mid controls that are as easy to harness as twisting a few knobs. Each knob’s frequencies have been carefully defined (with the sweet spots marked) for the needs of players and to offer one of the most flexible EQ pedals out there.

Whether you’re wanting a fully customizable clean boost, the ability to fine-tune the tone of another pedal, or to just bring out the best in your guitar, bass or any instrument you choose to plug into it - we crafted the Wampler EQuator to be the tonal sweetener you need to get the job done. Even if you don’t use a pedalboard and are not a guitar player - put this between your instrument and the amp, the P.A. or recording interface…the EQuator will bring it to life.

The Pedal for every kind of Musician

With its precise frequency control, ample output, and compact design, there isn’t a musician out there who wouldn’t benefit from adding an EQuator to their rig. Bring up only the mid frequencies you want to help your instrument be alive in the mix, dial back the highs to tame any kind of harshness from the room - you can even completely change the character of your favorite drive pedal. With its sheer versatility, the Wampler EQuator will quickly become your not-so- secret weapon.

Find your Tone, Fast

We designed the EQuator around the needs of the player, refusing to riddle it with too many small sliders or overly complicated switching. Nailing the tone you desire is an intuitive affair that you’ll find invaluable in the heat of a performance. Whether onstage or in the studio, time is at a premium. Get your perfect tone faster with the Wampler EQuator.

Wampler-Quality Construction

Brian Wampler’s attention to detail and commitment to designing the best and most player-friendly products out there are second to none. Those qualities are on full display within The EQuator. From its convenient top-mounted jacks to its impressively low noise floor, The EQuator semi-parametric EQ pedal is every bit a Wampler.

Bass

Active control of 130htz, plus and minus 19db. As always, how this reacts all depends on where you put it in your signal chain. If placed at the end of your chain as a tone shaper, this will react like suddenly putting your amp through a closed back 4x12” cab... A large amount of warmth and thump will appear... It can also give the impression of tightening up the bass when cut to the right amount...When positioned pre-gain, you can start to smash the low end of the tone, giving your overdrives and distortion fuzz characteristics when pushed hard. When pushed in a more subtle way, you can thicken up your tone to sound a little like a D-style amp. Don’t overlook the bass control, find that sweet spot and exploit it fully.

Mid Levels

This is where the majority of your tweaking will take place... when you choose your frequency, these will be places where you can cut or boost. Mid 1 can cut or boost the selected frequency by up to 15db. Mid 2 can cut or boost the selected frequency by up to 25db. As you can imagine, this is a MASSIVE amount to play with, so don’t be shy to slowly bring them in and out to find your sweet spot. We’ll be very surprised if you end up at the extremes of these controls. There are some fun tones hidden when pairing the two levels together with various mid frequencies. It’s all about tweaking and finding those hidden tones.

Mid Freq.

This is where the fun really starts! Mid1 allows you to sweep between 238hz and 5khz. Mid2 ranges from 480hz to 4.8ktz. So, you have a lot of room to choose the places you want to tweak. This isn’t just low and high mids, this is pretty much all of the mids available to you on both. So, where do we go from here... Well, if you are using the EQuator as a tone shaper, you’ll be looking to tame some of the mids, maybe scoop out between 1k and 2.2k, probably closer to 2.2k - that’s your classic mid scoop location and will make any amp give you a little bit of a smiley face feel. When you are using this pre gain, whether that be your amps gain or drive pedals, you’ll want to take note of some of the frequencies highlighted... Mid 1 has a larger Q, while Mid 2 has a more narrow Q, so you have the option to really nail down the style of change you make between the two controls.

Treble

7kz, plus or minus 19db... The location of the sparkle and chime. Now, many amps are known to sparkle and be potentially bright and responsive... On the flip side of that, this is also where certain rooms can cause your ears to ring for days afterwards. By controlling the high end of your signal before it hits the amp, you can bring that shrillness back under control. On the flip side, if you are looking to brighten up your amp a little, here is where to bring it back in. When you stick it before pedals, you can make the pedals that sit behind it react completely differently. You can make that drive cut through a little more, give it a little more brightness and make sure you can be heard without increasing the volume dramatically.

Product description

Specifications:

Package size: 22 * 14 * 5.5cm / 8.7 * 5.5 * 2.2in

Package weight: 125g / 4.4oz



Package List:

1 * 4 Band EQ Equalizer

1 * End Pin Jack

4 * Mounting Screws

1 * Screw Cap

1 * Metal Washer

1 * Sticky Plate

• 4-Band Equalizer, push bass/middle/treble to adjust frequency.
• Phrase and volume control.
• LED for battery check, replace battery when Batt lights.
• Powered by a 9V battery (not included).

User questions & answers

Question:	Includes screws for installation
Answer:	I did not recieve screws with mine.
Question:	Includes screws for installation
Answer:	No, it's not included
Question:	Can I install this on a regular guitar and use it I'm not sure how this would work tbh
Answer:	Should be fine. I built some CBGs and glued the pickup on the inside of the top under the bridge. I have not installed one on an existing guitar.
Question:	Can this used for classical guitars
Answer:	Yes, i just build my 8th classical guitar using this EQ-7545R and the result is fantastic. Low noise and distortion and the classical sound when played without amplification is still goodthe pickup under the bridge bone doesn't afect the acoustic sound negatively